1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
|
/*
* Buffalo WZR-HP-AG300H board support
*
* Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-ath79/ath79.h>
#include "dev-eth.h"
#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "machtypes.h"
#define WZRHPAG300H_MAC_OFFSET 0x20c
#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */
#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL)
static struct mtd_partition wzrhpag300h_flash_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x0040000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "u-boot-env",
.offset = 0x0040000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "art",
.offset = 0x0050000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = 0x0060000,
.size = 0x0100000,
}, {
.name = "rootfs",
.offset = 0x0160000,
.size = 0x1e90000,
}, {
.name = "user_property",
.offset = 0x1ff0000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "firmware",
.offset = 0x0060000,
.size = 0x1f90000,
}
};
static struct flash_platform_data wzrhpag300h_flash_data = {
.parts = wzrhpag300h_flash_partitions,
.nr_parts = ARRAY_SIZE(wzrhpag300h_flash_partitions),
};
static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = {
{
.name = "buffalo:red:diag",
.gpio = 1,
.active_low = 1,
},
};
static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 11,
.active_low = 1,
}, {
.desc = "usb",
.type = EV_KEY,
.code = BTN_2,
.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 3,
.active_low = 1,
}, {
.desc = "aoss",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 5,
.active_low = 1,
}, {
.desc = "router_auto",
.type = EV_KEY,
.code = BTN_6,
.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 6,
.active_low = 1,
}, {
.desc = "router_off",
.type = EV_KEY,
.code = BTN_5,
.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 7,
.active_low = 1,
}
};
static void __init wzrhpag300h_setup(void)
{
u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;
ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1);
ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth1_data.phy_mask = BIT(4);
ath79_register_eth(0);
ath79_register_eth(1);
ath79_set_usb_power_gpio(2, GPIOF_OUT_INIT_HIGH, "USB power");
ath79_register_usb();
ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
wzrhpag300h_leds_gpio);
ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wzrhpag300h_gpio_keys),
wzrhpag300h_gpio_keys);
ath79_register_m25p80_multi(&wzrhpag300h_flash_data);
ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
}
MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",
"Buffalo WZR-HP-AG300H", wzrhpag300h_setup);
|
