1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
|
/*
* TP-LINK TL-WR1043ND board support
*
* Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "devices.h"
#include "dev-m25p80.h"
#define TL_WR1043ND_GPIO_LED_SYSTEM 2
#define TL_WR1043ND_GPIO_LED_QSS 5
#define TL_WR1043ND_GPIO_BTN_RESET 3
#define TL_WR1043ND_GPIO_BTN_QSS 7
#define TL_WR1043ND_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition tl_wr1043nd_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "kernel",
.offset = 0x020000,
.size = 0x140000,
} , {
.name = "rootfs",
.offset = 0x160000,
.size = 0x690000,
} , {
.name = "art",
.offset = 0x7f0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "firmware",
.offset = 0x020000,
.size = 0x7d0000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data tl_wr1043nd_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.parts = tl_wr1043nd_partitions,
.nr_parts = ARRAY_SIZE(tl_wr1043nd_partitions),
#endif
};
static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
{
.name = "tl-wr1043nd:green:system",
.gpio = TL_WR1043ND_GPIO_LED_SYSTEM,
.active_low = 1,
}, {
.name = "tl-wr1043nd:red:qss",
.gpio = TL_WR1043ND_GPIO_LED_QSS,
.active_low = 1,
}
};
static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = BTN_0,
.threshold = 5,
.gpio = TL_WR1043ND_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "qss",
.type = EV_KEY,
.code = BTN_1,
.threshold = 5,
.gpio = TL_WR1043ND_GPIO_BTN_QSS,
.active_low = 1,
}
};
static void __init tl_wr1043nd_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.phy_mask = 0x0;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_add_device_eth(0);
ar71xx_add_device_usb();
ar71xx_add_device_m25p80(&tl_wr1043nd_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
tl_wr1043nd_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(tl_wr1043nd_gpio_buttons),
tl_wr1043nd_gpio_buttons);
ar91xx_add_device_wmac();
}
MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TP-LINK TL-WR1043ND", tl_wr1043nd_setup);
|