1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
|
/*
* D-Link DIR-615 rev C1 board support
*
* Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "machtype.h"
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */
#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */
#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */
#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */
#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */
#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */
#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */
/* buttons may need refinement */
#define DIR_615C1_GPIO_BTN_WPS 12
#define DIR_615C1_GPIO_BTN_RESET 21
#define DIR_615C1_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition dir_615c1_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "config",
.offset = 0x020000,
.size = 0x010000,
} , {
.name = "kernel",
.offset = 0x030000,
.size = 0x0d0000,
} , {
.name = "rootfs",
.offset = 0x100000,
.size = 0x2f0000,
} , {
.name = "art",
.offset = 0x3f0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "firmware",
.offset = 0x030000,
.size = 0x3c0000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data dir_615c1_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.parts = dir_615c1_partitions,
.nr_parts = ARRAY_SIZE(dir_615c1_partitions),
#endif
};
static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
{
.name = "dir-615c1:orange:status",
.gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS,
.active_low = 1,
}, {
.name = "dir-615c1:blue:wps",
.gpio = DIR_615C1_GPIO_LED_BLUE_WPS,
.active_low = 1,
}, {
.name = "dir-615c1:green:wan",
.gpio = DIR_615C1_GPIO_LED_GREEN_WAN,
.active_low = 1,
}, {
.name = "dir-615c1:green:wancpu",
.gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU,
.active_low = 1,
}, {
.name = "dir-615c1:green:wlan",
.gpio = DIR_615C1_GPIO_LED_GREEN_WLAN,
.active_low = 1,
}, {
.name = "dir-615c1:green:status",
.gpio = DIR_615C1_GPIO_LED_GREEN_STATUS,
.active_low = 1,
}, {
.name = "dir-615c1:orange:wan",
.gpio = DIR_615C1_GPIO_LED_ORANGE_WAN,
.active_low = 1,
}
};
static struct gpio_button dir_615c1_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = BTN_0,
.threshold = 5,
.gpio = DIR_615C1_GPIO_BTN_RESET,
}, {
.desc = "wps",
.type = EV_KEY,
.code = BTN_1,
.threshold = 5,
.gpio = DIR_615C1_GPIO_BTN_WPS,
}
};
static void __init dir_615c1_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_m25p80(&dir_615c1_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
dir_615c1_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, DIR_615C1_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(dir_615c1_gpio_buttons),
dir_615c1_gpio_buttons);
ar913x_add_device_wmac(eeprom, NULL);
}
MIPS_MACHINE(AR71XX_MACH_DIR_615_C1, "D-Link DIR-615 rev. C1", dir_615c1_setup);
|
