From 537082e01849ca85227c5b462b8ac9aceb11b77a Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Sat, 24 Apr 2010 12:18:46 +0200 Subject: [PATCH 02/21] Add jz4740 udc driver History: - driver by Ingenic - patch by Lars-Peter Clausen. - updated to 3.1 by Maarten ter Huurne --- drivers/usb/gadget/Kconfig | 8 + drivers/usb/gadget/Makefile | 1 + drivers/usb/gadget/gadget_chips.h | 3 + drivers/usb/gadget/jz4740_udc.c | 2199 +++++++++++++++++++++++++++++++++++++ drivers/usb/gadget/jz4740_udc.h | 101 ++ 5 files changed, 2312 insertions(+), 0 deletions(-) create mode 100644 drivers/usb/gadget/jz4740_udc.c create mode 100644 drivers/usb/gadget/jz4740_udc.h diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 23a4473..89b7d28 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -178,6 +178,14 @@ config USB_FUSB300 help Faraday usb device controller FUSB300 driver +config USB_JZ4740 + tristate "JZ4740 UDC" + depends on MACH_JZ4740 + select USB_GADGET_DUALSPEED + help + Select this to support the Ingenic JZ4740 processor + high speed USB device controller. + config USB_OMAP tristate "OMAP USB Device Controller" depends on ARCH_OMAP diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index b54ac61..2d65f6e 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_USB_PXA_U2O) += mv_udc.o mv_udc-y := mv_udc_core.o obj-$(CONFIG_USB_CI13XXX_MSM) += ci13xxx_msm.o obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o +obj-$(CONFIG_USB_JZ4740) += jz4740_udc.o # # USB gadget drivers diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index a8855d0..99f1580 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -36,6 +36,7 @@ #define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name)) #define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name)) #define gadget_is_imx(g) (!strcmp("imx_udc", (g)->name)) +#define gadget_is_jz4740(g) (!strcmp("ingenic_hsusb", (g)->name)) #define gadget_is_langwell(g) (!strcmp("langwell_udc", (g)->name)) #define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name)) #define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name)) @@ -118,6 +119,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x31; else if (gadget_is_dwc3(gadget)) return 0x32; + else if (gadget_is_jz4740(gadget)) + return 0x33; return -ENOENT; } diff --git a/drivers/usb/gadget/jz4740_udc.c b/drivers/usb/gadget/jz4740_udc.c new file mode 100644 index 0000000..8d36434 --- /dev/null +++ b/drivers/usb/gadget/jz4740_udc.c @@ -0,0 +1,2199 @@ +/* + * linux/drivers/usb/gadget/jz4740_udc.c + * + * Ingenic JZ4740 on-chip high speed USB device controller + * + * Copyright (C) 2006 - 2008 Ingenic Semiconductor Inc. + * Author: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * This device has ep0, two bulk-in/interrupt-in endpoints, and one bulk-out endpoint. + * + * - Endpoint numbering is fixed: ep0, ep1in-int, ep2in-bulk, ep1out-bulk. + * - DMA works with bulk-in (channel 1) and bulk-out (channel 2) endpoints. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "jz4740_udc.h" + +#define JZ_REG_UDC_FADDR 0x00 /* Function Address 8-bit */ +#define JZ_REG_UDC_POWER 0x01 /* Power Management 8-bit */ +#define JZ_REG_UDC_INTRIN 0x02 /* Interrupt IN 16-bit */ +#define JZ_REG_UDC_INTROUT 0x04 /* Interrupt OUT 16-bit */ +#define JZ_REG_UDC_INTRINE 0x06 /* Intr IN enable 16-bit */ +#define JZ_REG_UDC_INTROUTE 0x08 /* Intr OUT enable 16-bit */ +#define JZ_REG_UDC_INTRUSB 0x0a /* Interrupt USB 8-bit */ +#define JZ_REG_UDC_INTRUSBE 0x0b /* Interrupt USB Enable 8-bit */ +#define JZ_REG_UDC_FRAME 0x0c /* Frame number 16-bit */ +#define JZ_REG_UDC_INDEX 0x0e /* Index register 8-bit */ +#define JZ_REG_UDC_TESTMODE 0x0f /* USB test mode 8-bit */ + +#define JZ_REG_UDC_CSR0 0x12 /* EP0 CSR 8-bit */ +#define JZ_REG_UDC_INMAXP 0x10 /* EP1-2 IN Max Pkt Size 16-bit */ +#define JZ_REG_UDC_INCSR 0x12 /* EP1-2 IN CSR LSB 8/16bit */ +#define JZ_REG_UDC_INCSRH 0x13 /* EP1-2 IN CSR MSB 8-bit */ + +#define JZ_REG_UDC_OUTMAXP 0x14 /* EP1 OUT Max Pkt Size 16-bit */ +#define JZ_REG_UDC_OUTCSR 0x16 /* EP1 OUT CSR LSB 8/16bit */ +#define JZ_REG_UDC_OUTCSRH 0x17 /* EP1 OUT CSR MSB 8-bit */ +#define JZ_REG_UDC_OUTCOUNT 0x18 /* bytes in EP0/1 OUT FIFO 16-bit */ + +#define JZ_REG_UDC_EP_FIFO(x) (4 * (x) + 0x20) + +#define JZ_REG_UDC_EPINFO 0x78 /* Endpoint information */ +#define JZ_REG_UDC_RAMINFO 0x79 /* RAM information */ + +#define JZ_REG_UDC_INTR 0x200 /* DMA pending interrupts */ +#define JZ_REG_UDC_CNTL1 0x204 /* DMA channel 1 control */ +#define JZ_REG_UDC_ADDR1 0x208 /* DMA channel 1 AHB memory addr */ +#define JZ_REG_UDC_COUNT1 0x20c /* DMA channel 1 byte count */ +#define JZ_REG_UDC_CNTL2 0x214 /* DMA channel 2 control */ +#define JZ_REG_UDC_ADDR2 0x218 /* DMA channel 2 AHB memory addr */ +#define JZ_REG_UDC_COUNT2 0x21c /* DMA channel 2 byte count */ + +/* Power register bit masks */ +#define USB_POWER_SUSPENDM 0x01 +#define USB_POWER_RESUME 0x04 +#define USB_POWER_HSMODE 0x10 +#define USB_POWER_HSENAB 0x20 +#define USB_POWER_SOFTCONN 0x40 + +/* Interrupt register bit masks */ +#define USB_INTR_SUSPEND 0x01 +#define USB_INTR_RESUME 0x02 +#define USB_INTR_RESET 0x04 + +#define USB_INTR_EP0 0x0001 +#define USB_INTR_INEP1 0x0002 +#define USB_INTR_INEP2 0x0004 +#define USB_INTR_OUTEP1 0x0002 + +/* CSR0 bit masks */ +#define USB_CSR0_OUTPKTRDY 0x01 +#define USB_CSR0_INPKTRDY 0x02 +#define USB_CSR0_SENTSTALL 0x04 +#define USB_CSR0_DATAEND 0x08 +#define USB_CSR0_SETUPEND 0x10 +#define USB_CSR0_SENDSTALL 0x20 +#define USB_CSR0_SVDOUTPKTRDY 0x40 +#define USB_CSR0_SVDSETUPEND 0x80 + +/* Endpoint CSR register bits */ +#define USB_INCSRH_AUTOSET 0x80 +#define USB_INCSRH_ISO 0x40 +#define USB_INCSRH_MODE 0x20 +#define USB_INCSRH_DMAREQENAB 0x10 +#define USB_INCSRH_DMAREQMODE 0x04 +#define USB_INCSR_CDT 0x40 +#define USB_INCSR_SENTSTALL 0x20 +#define USB_INCSR_SENDSTALL 0x10 +#define USB_INCSR_FF 0x08 +#define USB_INCSR_UNDERRUN 0x04 +#define USB_INCSR_FFNOTEMPT 0x02 +#define USB_INCSR_INPKTRDY 0x01 + +#define USB_OUTCSRH_AUTOCLR 0x80 +#define USB_OUTCSRH_ISO 0x40 +#define USB_OUTCSRH_DMAREQENAB 0x20 +#define USB_OUTCSRH_DNYT 0x10 +#define USB_OUTCSRH_DMAREQMODE 0x08 +#define USB_OUTCSR_CDT 0x80 +#define USB_OUTCSR_SENTSTALL 0x40 +#define USB_OUTCSR_SENDSTALL 0x20 +#define USB_OUTCSR_FF 0x10 +#define USB_OUTCSR_DATAERR 0x08 +#define USB_OUTCSR_OVERRUN 0x04 +#define USB_OUTCSR_FFFULL 0x02 +#define USB_OUTCSR_OUTPKTRDY 0x01 + +/* DMA control bits */ +#define USB_CNTL_ENA 0x01 +#define USB_CNTL_DIR_IN 0x02 +#define USB_CNTL_MODE_1 0x04 +#define USB_CNTL_INTR_EN 0x08 +#define USB_CNTL_EP(n) ((n) << 4) +#define USB_CNTL_BURST_0 (0 << 9) +#define USB_CNTL_BURST_4 (1 << 9) +#define USB_CNTL_BURST_8 (2 << 9) +#define USB_CNTL_BURST_16 (3 << 9) + + +#ifndef DEBUG +# define DEBUG(fmt,args...) do {} while(0) +#endif +#ifndef DEBUG_EP0 +# define NO_STATES +# define DEBUG_EP0(fmt,args...) do {} while(0) +#endif +#ifndef DEBUG_SETUP +# define DEBUG_SETUP(fmt,args...) do {} while(0) +#endif + +static struct jz4740_udc jz4740_udc_controller; + +/* + * Local declarations. + */ +static int jz4740_udc_start(struct usb_gadget_driver *driver, + int (*bind)(struct usb_gadget *)); +static int jz4740_udc_stop(struct usb_gadget_driver *driver); +static void jz4740_ep0_kick(struct jz4740_udc *dev, struct jz4740_ep *ep); +static void jz4740_handle_ep0(struct jz4740_udc *dev, uint32_t intr); + +static void done(struct jz4740_ep *ep, struct jz4740_request *req, + int status); +static void pio_irq_enable(struct jz4740_ep *ep); +static void pio_irq_disable(struct jz4740_ep *ep); +static void stop_activity(struct jz4740_udc *dev, + struct usb_gadget_driver *driver); +static void nuke(struct jz4740_ep *ep, int status); +static void flush(struct jz4740_ep *ep); +static void udc_set_address(struct jz4740_udc *dev, unsigned char address); + +/*-------------------------------------------------------------------------*/ + +/* inline functions of register read/write/set/clear */ + +static inline uint8_t usb_readb(struct jz4740_udc *udc, size_t reg) +{ + return readb(udc->base + reg); +} + +static inline uint16_t usb_readw(struct jz4740_udc *udc, size_t reg) +{ + return readw(udc->base + reg); +} + +static inline uint32_t usb_readl(struct jz4740_udc *udc, size_t reg) +{ + return readl(udc->base + reg); +} + +static inline void usb_writeb(struct jz4740_udc *udc, size_t reg, uint8_t val) +{ + writeb(val, udc->base + reg); +} + +static inline void usb_writew(struct jz4740_udc *udc, size_t reg, uint16_t val) +{ + writew(val, udc->base + reg); +} + +static inline void usb_writel(struct jz4740_udc *udc, size_t reg, uint32_t val) +{ + writel(val, udc->base + reg); +} + +static inline void usb_setb(struct jz4740_udc *udc, size_t reg, uint8_t mask) +{ + usb_writeb(udc, reg, usb_readb(udc, reg) | mask); +} + +static inline void usb_setw(struct jz4740_udc *udc, size_t reg, uint16_t mask) +{ + usb_writew(udc, reg, usb_readw(udc, reg) | mask); +} + +static inline void usb_clearb(struct jz4740_udc *udc, size_t reg, uint8_t mask) +{ + usb_writeb(udc, reg, usb_readb(udc, reg) & ~mask); +} + +static inline void usb_clearw(struct jz4740_udc *udc, size_t reg, uint16_t mask) +{ + usb_writew(udc, reg, usb_readw(udc, reg) & ~mask); +} + +/*-------------------------------------------------------------------------*/ + +static inline void jz_udc_set_index(struct jz4740_udc *udc, uint8_t index) +{ + usb_writeb(udc, JZ_REG_UDC_INDEX, index); +} + +static inline void jz_udc_select_ep(struct jz4740_ep *ep) +{ + jz_udc_set_index(ep->dev, ep_index(ep)); +} + +static inline int write_packet(struct jz4740_ep *ep, + struct jz4740_request *req, unsigned int count) +{ + uint8_t *buf; + unsigned int length; + void __iomem *fifo = ep->dev->base + ep->fifo; + + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + + buf = req->req.buf + req->req.actual; + + length = req->req.length - req->req.actual; + if (length > count) + length = count; + req->req.actual += length; + + DEBUG("Write %d (count %d), fifo %x\n", length, count, ep->fifo); + + writesl(fifo, buf, length >> 2); + writesb(fifo, &buf[length - (length & 3)], length & 3); + + return length; +} + +static int read_packet(struct jz4740_ep *ep, + struct jz4740_request *req, unsigned int count) +{ + uint8_t *buf; + unsigned int length; + void __iomem *fifo = ep->dev->base + ep->fifo; + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + + buf = req->req.buf + req->req.actual; + + length = req->req.length - req->req.actual; + if (length > count) + length = count; + req->req.actual += length; + + DEBUG("Read %d, fifo %x\n", length, ep->fifo); + + readsl(fifo, buf, length >> 2); + readsb(fifo, &buf[length - (length & 3)], length & 3); + + return length; +} + +/*-------------------------------------------------------------------------*/ + +/* + * udc_disable - disable USB device controller + */ +static void udc_disable(struct jz4740_udc *dev) +{ + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + + udc_set_address(dev, 0); + + /* Disable interrupts */ + usb_writew(dev, JZ_REG_UDC_INTRINE, 0); + usb_writew(dev, JZ_REG_UDC_INTROUTE, 0); + usb_writeb(dev, JZ_REG_UDC_INTRUSBE, 0); + + /* Disable DMA */ + usb_writel(dev, JZ_REG_UDC_CNTL1, 0); + usb_writel(dev, JZ_REG_UDC_CNTL2, 0); + + /* Disconnect from usb */ + usb_clearb(dev, JZ_REG_UDC_POWER, USB_POWER_SOFTCONN); + + /* Disable the USB PHY */ + clk_disable(dev->clk); + + dev->ep0state = WAIT_FOR_SETUP; + dev->gadget.speed = USB_SPEED_UNKNOWN; + + return; +} + +/* + * udc_reinit - initialize software state + */ +static void udc_reinit(struct jz4740_udc *dev) +{ + int i; + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + + /* device/ep0 records init */ + INIT_LIST_HEAD(&dev->gadget.ep_list); + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); + dev->ep0state = WAIT_FOR_SETUP; + + for (i = 0; i < UDC_MAX_ENDPOINTS; i++) { + struct jz4740_ep *ep = &dev->ep[i]; + + if (i != 0) + list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); + + INIT_LIST_HEAD(&ep->queue); + ep->desc = 0; + ep->stopped = 0; + } +} + +/* until it's enabled, this UDC should be completely invisible + * to any USB host. + */ +static void udc_enable(struct jz4740_udc *dev) +{ + int i; + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + + /* UDC state is incorrect - Added by River */ + if (dev->state != UDC_STATE_ENABLE) { + return; + } + + dev->gadget.speed = USB_SPEED_UNKNOWN; + + /* Flush FIFO for each */ + for (i = 0; i < UDC_MAX_ENDPOINTS; i++) { + struct jz4740_ep *ep = &dev->ep[i]; + + jz_udc_select_ep(ep); + flush(ep); + } + + /* Set this bit to allow the UDC entering low-power mode when + * there are no actions on the USB bus. + * UDC still works during this bit was set. + */ + jz4740_clock_udc_enable_auto_suspend(); + + /* Enable the USB PHY */ + clk_enable(dev->clk); + + /* Disable interrupts */ +/* usb_writew(dev, JZ_REG_UDC_INTRINE, 0); + usb_writew(dev, JZ_REG_UDC_INTROUTE, 0); + usb_writeb(dev, JZ_REG_UDC_INTRUSBE, 0);*/ + + /* Enable interrupts */ + usb_setw(dev, JZ_REG_UDC_INTRINE, USB_INTR_EP0); + usb_setb(dev, JZ_REG_UDC_INTRUSBE, USB_INTR_RESET); + /* Don't enable rest of the interrupts */ + /* usb_setw(dev, JZ_REG_UDC_INTRINE, USB_INTR_INEP1 | USB_INTR_INEP2); + usb_setw(dev, JZ_REG_UDC_INTROUTE, USB_INTR_OUTEP1); */ + + /* Enable SUSPEND */ + /* usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_SUSPENDM); */ + + /* Enable HS Mode */ + usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_HSENAB); + + /* Let host detect UDC: + * Software must write a 1 to the PMR:USB_POWER_SOFTCONN bit to turn this + * transistor on and pull the USBDP pin HIGH. + */ + usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_SOFTCONN); + + return; +} + +/*-------------------------------------------------------------------------*/ + +/* keeping it simple: + * - one bus driver, initted first; + * - one function driver, initted second + */ + +/* + * Register entry point for the peripheral controller driver. + */ + +static int jz4740_udc_start(struct usb_gadget_driver *driver, + int (*bind)(struct usb_gadget *)) +{ + struct jz4740_udc *dev = &jz4740_udc_controller; + int retval; + + if (!driver || !bind) + return -EINVAL; + + if (!dev) + return -ENODEV; + + if (dev->driver) + return -EBUSY; + + /* hook up the driver */ + dev->driver = driver; + dev->gadget.dev.driver = &driver->driver; + + retval = bind(&dev->gadget); + if (retval) { + DEBUG("%s: bind to driver %s --> error %d\n", dev->gadget.name, + driver->driver.name, retval); + dev->driver = 0; + return retval; + } + + /* then enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + */ + udc_enable(dev); + + DEBUG("%s: registered gadget driver '%s'\n", dev->gadget.name, + driver->driver.name); + + return 0; +} + +static void stop_activity(struct jz4740_udc *dev, + struct usb_gadget_driver *driver) +{ + int i; + + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + + /* don't disconnect drivers more than once */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = 0; + dev->gadget.speed = USB_SPEED_UNKNOWN; + + /* prevent new request submissions, kill any outstanding requests */ + for (i = 0; i < UDC_MAX_ENDPOINTS; i++) { + struct jz4740_ep *ep = &dev->ep[i]; + + ep->stopped = 1; + + jz_udc_select_ep(ep); + nuke(ep, -ESHUTDOWN); + } + + /* report disconnect; the driver is already quiesced */ + if (driver) { + spin_unlock(&dev->lock); + driver->disconnect(&dev->gadget); + spin_lock(&dev->lock); + } + + /* re-init driver-visible data structures */ + udc_reinit(dev); +} + + +/* + * Unregister entry point for the peripheral controller driver. + */ +static int jz4740_udc_stop(struct usb_gadget_driver *driver) +{ + struct jz4740_udc *dev = &jz4740_udc_controller; + unsigned long flags; + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + + if (!dev) + return -ENODEV; + if (!driver || driver != dev->driver) + return -EINVAL; + if (!driver->unbind) + return -EBUSY; + + spin_lock_irqsave(&dev->lock, flags); + dev->driver = 0; + stop_activity(dev, driver); + spin_unlock_irqrestore(&dev->lock, flags); + + driver->unbind(&dev->gadget); + + udc_disable(dev); + + DEBUG("unregistered driver '%s'\n", driver->driver.name); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/** Write request to FIFO (max write == maxp size) + * Return: 0 = still running, 1 = completed, negative = errno + * NOTE: INDEX register must be set for EP + */ +static int write_fifo(struct jz4740_ep *ep, struct jz4740_request *req) +{ + struct jz4740_udc *dev = ep->dev; + uint32_t max, csr; + + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + max = le16_to_cpu(ep->desc->wMaxPacketSize); + + csr = usb_readb(dev, ep->csr); + + if (!(csr & USB_INCSR_FFNOTEMPT)) { + unsigned count; + int is_last, is_short; + + count = write_packet(ep, req, max); + usb_setb(dev, ep->csr, USB_INCSR_INPKTRDY); + + /* last packet is usually short (or a zlp) */ + if (unlikely(count != max)) + is_last = is_short = 1; + else { + if (likely(req->req.length != req->req.actual) + || req->req.zero) + is_last = 0; + else + is_last = 1; + /* interrupt/iso maxpacket may not fill the fifo */ + is_short = unlikely(max < ep_maxpacket(ep)); + } + + DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __FUNCTION__, + ep->ep.name, count, + is_last ? "/L" : "", is_short ? "/S" : "", + req->req.length - req->req.actual, req); + + /* requests complete when all IN data is in the FIFO */ + if (is_last) { + done(ep, req, 0); + if (list_empty(&ep->queue)) { + pio_irq_disable(ep); + } + return 1; + } + } else { + DEBUG("Hmm.. %d ep FIFO is not empty!\n", ep_index(ep)); + } + + return 0; +} + +/** Read to request from FIFO (max read == bytes in fifo) + * Return: 0 = still running, 1 = completed, negative = errno + * NOTE: INDEX register must be set for EP + */ +static int read_fifo(struct jz4740_ep *ep, struct jz4740_request *req) +{ + struct jz4740_udc *dev = ep->dev; + uint32_t csr; + unsigned count, is_short; + + /* make sure there's a packet in the FIFO. */ + csr = usb_readb(dev, ep->csr); + if (!(csr & USB_OUTCSR_OUTPKTRDY)) { + DEBUG("%s: Packet NOT ready!\n", __FUNCTION__); + return -EINVAL; + } + + /* read all bytes from this packet */ + count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT); + + is_short = (count < ep->ep.maxpacket); + + count = read_packet(ep, req, count); + + DEBUG("read %s %02x, %d bytes%s req %p %d/%d\n", + ep->ep.name, csr, count, + is_short ? "/S" : "", req, req->req.actual, req->req.length); + + /* Clear OutPktRdy */ + usb_clearb(dev, ep->csr, USB_OUTCSR_OUTPKTRDY); + + /* completion */ + if (is_short || req->req.actual == req->req.length) { + done(ep, req, 0); + + if (list_empty(&ep->queue)) + pio_irq_disable(ep); + return 1; + } + + /* finished that packet. the next one may be waiting... */ + return 0; +} + +/* + * done - retire a request; caller blocked irqs + * INDEX register is preserved to keep same + */ +static void done(struct jz4740_ep *ep, struct jz4740_request *req, int status) +{ + unsigned int stopped = ep->stopped; + uint32_t index; + + DEBUG("%s, %p\n", __FUNCTION__, ep); + list_del_init(&req->queue); + + if (likely(req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + if (status && status != -ESHUTDOWN) + DEBUG("complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + /* Read current index (completion may modify it) */ + index = usb_readb(ep->dev, JZ_REG_UDC_INDEX); + spin_unlock_irqrestore(&ep->dev->lock, ep->dev->lock_flags); + + req->req.complete(&ep->ep, &req->req); + + spin_lock_irqsave(&ep->dev->lock, ep->dev->lock_flags); + /* Restore index */ + jz_udc_set_index(ep->dev, index); + ep->stopped = stopped; +} + +static inline unsigned int jz4740_udc_ep_irq_enable_reg(struct jz4740_ep *ep) +{ + if (ep_is_in(ep)) + return JZ_REG_UDC_INTRINE; + else + return JZ_REG_UDC_INTROUTE; +} + +/** Enable EP interrupt */ +static void pio_irq_enable(struct jz4740_ep *ep) +{ + DEBUG("%s: EP%d %s\n", __FUNCTION__, ep_index(ep), ep_is_in(ep) ? "IN": "OUT"); + + usb_setw(ep->dev, jz4740_udc_ep_irq_enable_reg(ep), BIT(ep_index(ep))); +} + +/** Disable EP interrupt */ +static void pio_irq_disable(struct jz4740_ep *ep) +{ + DEBUG("%s: EP%d %s\n", __FUNCTION__, ep_index(ep), ep_is_in(ep) ? "IN": "OUT"); + + usb_clearw(ep->dev, jz4740_udc_ep_irq_enable_reg(ep), BIT(ep_index(ep))); +} + +/* + * nuke - dequeue ALL requests + */ +static void nuke(struct jz4740_ep *ep, int status) +{ + struct jz4740_request *req; + + DEBUG("%s, %p\n", __FUNCTION__, ep); + + /* Flush FIFO */ + flush(ep); + + /* called with irqs blocked */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct jz4740_request, queue); + done(ep, req, status); + } + + /* Disable IRQ if EP is enabled (has descriptor) */ + if (ep->desc) + pio_irq_disable(ep); +} + +/** Flush EP FIFO + * NOTE: INDEX register must be set before this call + */ +static void flush(struct jz4740_ep *ep) +{ + DEBUG("%s: %s\n", __FUNCTION__, ep->ep.name); + + switch (ep->type) { + case ep_bulk_in: + case ep_interrupt: + usb_setb(ep->dev, ep->csr, USB_INCSR_FF); + break; + case ep_bulk_out: + usb_setb(ep->dev, ep->csr, USB_OUTCSR_FF); + break; + case ep_control: + break; + } +} + +/** + * jz4740_in_epn - handle IN interrupt + */ +static void jz4740_in_epn(struct jz4740_udc *dev, uint32_t ep_idx, uint32_t intr) +{ + uint32_t csr; + struct jz4740_ep *ep = &dev->ep[ep_idx + 1]; + struct jz4740_request *req; + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + + jz_udc_select_ep(ep); + + csr = usb_readb(dev, ep->csr); + DEBUG("%s: %d, csr %x\n", __FUNCTION__, ep_idx, csr); + + if (csr & USB_INCSR_SENTSTALL) { + DEBUG("USB_INCSR_SENTSTALL\n"); + usb_clearb(dev, ep->csr, USB_INCSR_SENTSTALL); + return; + } + + if (!ep->desc) { + DEBUG("%s: NO EP DESC\n", __FUNCTION__); + return; + } + + if (!list_empty(&ep->queue)) { + req = list_first_entry(&ep->queue, struct jz4740_request, queue); + write_fifo(ep, req); + } +} + +/* + * Bulk OUT (recv) + */ +static void jz4740_out_epn(struct jz4740_udc *dev, uint32_t ep_idx, uint32_t intr) +{ + struct jz4740_ep *ep = &dev->ep[ep_idx]; + struct jz4740_request *req; + + DEBUG("%s: %d\n", __FUNCTION__, ep_idx); + + jz_udc_select_ep(ep); + if (ep->desc) { + uint32_t csr; + + while ((csr = usb_readb(dev, ep->csr)) & + (USB_OUTCSR_OUTPKTRDY | USB_OUTCSR_SENTSTALL)) { + DEBUG("%s: %x\n", __FUNCTION__, csr); + + if (csr & USB_OUTCSR_SENTSTALL) { + DEBUG("%s: stall sent, flush fifo\n", + __FUNCTION__); + /* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */ + flush(ep); + } else if (csr & USB_OUTCSR_OUTPKTRDY) { + if (list_empty(&ep->queue)) + req = 0; + else + req = + list_entry(ep->queue.next, + struct jz4740_request, + queue); + + if (!req) { + DEBUG("%s: NULL REQ %d\n", + __FUNCTION__, ep_idx); + break; + } else { + read_fifo(ep, req); + } + } + } + } else { + /* Throw packet away.. */ + DEBUG("%s: ep %p ep_indx %d No descriptor?!?\n", __FUNCTION__, ep, ep_idx); + flush(ep); + } +} + +/** Halt specific EP + * Return 0 if success + * NOTE: Sets INDEX register to EP ! + */ +static int jz4740_set_halt(struct usb_ep *_ep, int value) +{ + struct jz4740_udc *dev; + struct jz4740_ep *ep; + unsigned long flags; + + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + + ep = container_of(_ep, struct jz4740_ep, ep); + if (unlikely(!_ep || (!ep->desc && ep->type != ep_control))) { + DEBUG("%s, bad ep\n", __FUNCTION__); + return -EINVAL; + } + + dev = ep->dev; + + spin_lock_irqsave(&dev->lock, flags); + + jz_udc_select_ep(ep); + + DEBUG("%s, ep %d, val %d\n", __FUNCTION__, ep_index(ep), value); + + if (ep_index(ep) == 0) { + /* EP0 */ + usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SENDSTALL); + } else if (ep_is_in(ep)) { + uint32_t csr = usb_readb(dev, ep->csr); + if (value && ((csr & USB_INCSR_FFNOTEMPT) + || !list_empty(&ep->queue))) { + /* + * Attempts to halt IN endpoints will fail (returning -EAGAIN) + * if any transfer requests are still queued, or if the controller + * FIFO still holds bytes that the host hasn’t collected. + */ + spin_unlock_irqrestore(&dev->lock, flags); + DEBUG + ("Attempt to halt IN endpoint failed (returning -EAGAIN) %d %d\n", + (csr & USB_INCSR_FFNOTEMPT), + !list_empty(&ep->queue)); + return -EAGAIN; + } + flush(ep); + if (value) { + usb_setb(dev, ep->csr, USB_INCSR_SENDSTALL); + } else { + usb_clearb(dev, ep->csr, USB_INCSR_SENDSTALL); + usb_setb(dev, ep->csr, USB_INCSR_CDT); + } + } else { + + flush(ep); + if (value) { + usb_setb(dev, ep->csr, USB_OUTCSR_SENDSTALL); + } else { + usb_clearb(dev, ep->csr, USB_OUTCSR_SENDSTALL); + usb_setb(dev, ep->csr, USB_OUTCSR_CDT); + } + } + + ep->stopped = value; + + spin_unlock_irqrestore(&dev->lock, flags); + + DEBUG("%s %s halted\n", _ep->name, value == 0 ? "NOT" : "IS"); + + return 0; +} + + +static int jz4740_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct jz4740_ep *ep; + struct jz4740_udc *dev; + unsigned long flags; + uint32_t max, csrh = 0; + + DEBUG("%s: trying to enable %s\n", __FUNCTION__, _ep->name); + + if (!_ep || !desc) + return -EINVAL; + + ep = container_of(_ep, struct jz4740_ep, ep); + if (ep->desc || ep->type == ep_control + || desc->bDescriptorType != USB_DT_ENDPOINT + || ep->bEndpointAddress != desc->bEndpointAddress) { + DEBUG("%s, bad ep or descriptor\n", __FUNCTION__); + return -EINVAL; + } + + /* xfer types must match, except that interrupt ~= bulk */ + if (ep->bmAttributes != desc->bmAttributes + && ep->bmAttributes != USB_ENDPOINT_XFER_BULK + && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { + DEBUG("%s, %s type mismatch\n", __FUNCTION__, _ep->name); + return -EINVAL; + } + + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + DEBUG("%s, bogus device state\n", __FUNCTION__); + return -ESHUTDOWN; + } + + max = le16_to_cpu(desc->wMaxPacketSize); + + spin_lock_irqsave(&ep->dev->lock, flags); + + /* Configure the endpoint */ + jz_udc_select_ep(ep); + if (ep_is_in(ep)) { + usb_writew(dev, JZ_REG_UDC_INMAXP, max); + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + csrh &= ~USB_INCSRH_ISO; + break; + case USB_ENDPOINT_XFER_ISOC: + csrh |= USB_INCSRH_ISO; + break; + } + usb_writeb(dev, JZ_REG_UDC_INCSRH, csrh); + } + else { + usb_writew(dev, JZ_REG_UDC_OUTMAXP, max); + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: + csrh &= ~USB_OUTCSRH_ISO; + break; + case USB_ENDPOINT_XFER_INT: + csrh &= ~USB_OUTCSRH_ISO; + csrh |= USB_OUTCSRH_DNYT; + break; + case USB_ENDPOINT_XFER_ISOC: + csrh |= USB_OUTCSRH_ISO; + break; + } + usb_writeb(dev, JZ_REG_UDC_OUTCSRH, csrh); + } + + + ep->stopped = 0; + ep->desc = desc; + ep->ep.maxpacket = max; + + spin_unlock_irqrestore(&ep->dev->lock, flags); + + /* Reset halt state (does flush) */ + jz4740_set_halt(_ep, 0); + + DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name); + + return 0; +} + +/** Disable EP + * NOTE: Sets INDEX register + */ +static int jz4740_ep_disable(struct usb_ep *_ep) +{ + struct jz4740_ep *ep; + unsigned long flags; + + DEBUG("%s, %p\n", __FUNCTION__, _ep); + + ep = container_of(_ep, struct jz4740_ep, ep); + if (!_ep || !ep->desc) { + DEBUG("%s, %s not enabled\n", __FUNCTION__, + _ep ? ep->ep.name : NULL); + return -EINVAL; + } + + spin_lock_irqsave(&ep->dev->lock, flags); + + jz_udc_select_ep(ep); + + /* Nuke all pending requests (does flush) */ + nuke(ep, -ESHUTDOWN); + + /* Disable ep IRQ */ + pio_irq_disable(ep); + + ep->desc = 0; + ep->stopped = 1; + + spin_unlock_irqrestore(&ep->dev->lock, flags); + + DEBUG("%s: disabled %s\n", __FUNCTION__, _ep->name); + return 0; +} + +static struct usb_request *jz4740_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) +{ + struct jz4740_request *req; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void jz4740_free_request(struct usb_ep *ep, struct usb_request *_req) +{ + struct jz4740_request *req; + + req = container_of(_req, struct jz4740_request, req); + WARN_ON(!list_empty(&req->queue)); + + kfree(req); +} + +/*--------------------------------------------------------------------*/ + +/** Queue one request + * Kickstart transfer if needed + * NOTE: Sets INDEX register + */ +static int jz4740_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct jz4740_request *req; + struct jz4740_ep *ep; + struct jz4740_udc *dev; + + DEBUG("%s, %p\n", __FUNCTION__, _ep); + + req = container_of(_req, struct jz4740_request, req); + if (unlikely + (!_req || !_req->complete || !_req->buf + || !list_empty(&req->queue))) { + DEBUG("%s, bad params\n", __FUNCTION__); + return -EINVAL; + } + + ep = container_of(_ep, struct jz4740_ep, ep); + if (unlikely(!_ep || (!ep->desc && ep->type != ep_control))) { + DEBUG("%s, bad ep\n", __FUNCTION__); + return -EINVAL; + } + + dev = ep->dev; + if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) { + DEBUG("%s, bogus device state %p\n", __FUNCTION__, dev->driver); + return -ESHUTDOWN; + } + + DEBUG("%s queue req %p, len %d buf %p\n", _ep->name, _req, _req->length, + _req->buf); + + spin_lock_irqsave(&dev->lock, dev->lock_flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* kickstart this i/o queue? */ + DEBUG("Add to %d Q %d %d\n", ep_index(ep), list_empty(&ep->queue), + ep->stopped); + if (list_empty(&ep->queue) && likely(!ep->stopped)) { + uint32_t csr; + + if (unlikely(ep_index(ep) == 0)) { + /* EP0 */ + list_add_tail(&req->queue, &ep->queue); + jz4740_ep0_kick(dev, ep); + req = 0; + } + else if (ep_is_in(ep)) { + /* EP1 & EP2 */ + jz_udc_select_ep(ep); + csr = usb_readb(dev, ep->csr); + pio_irq_enable(ep); + if (!(csr & USB_INCSR_FFNOTEMPT)) { + if (write_fifo(ep, req) == 1) + req = 0; + } + } else { + /* EP1 */ + jz_udc_select_ep(ep); + csr = usb_readb(dev, ep->csr); + pio_irq_enable(ep); + if (csr & USB_OUTCSR_OUTPKTRDY) { + if (read_fifo(ep, req) == 1) + req = 0; + } + } + } + + /* pio or dma irq handler advances the queue. */ + if (likely(req != 0)) + list_add_tail(&req->queue, &ep->queue); + + spin_unlock_irqrestore(&dev->lock, dev->lock_flags); + + return 0; +} + +/* dequeue JUST ONE request */ +static int jz4740_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct jz4740_ep *ep; + struct jz4740_request *req; + unsigned long flags; + + DEBUG("%s, %p\n", __FUNCTION__, _ep); + + ep = container_of(_ep, struct jz4740_ep, ep); + if (!_ep || ep->type == ep_control) + return -EINVAL; + + spin_lock_irqsave(&ep->dev->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + spin_unlock_irqrestore(&ep->dev->lock, flags); + return -EINVAL; + } + done(ep, req, -ECONNRESET); + + spin_unlock_irqrestore(&ep->dev->lock, flags); + return 0; +} + +/** Return bytes in EP FIFO + * NOTE: Sets INDEX register to EP + */ +static int jz4740_fifo_status(struct usb_ep *_ep) +{ + uint32_t csr; + int count = 0; + struct jz4740_ep *ep; + unsigned long flags; + + ep = container_of(_ep, struct jz4740_ep, ep); + if (!_ep) { + DEBUG("%s, bad ep\n", __FUNCTION__); + return -ENODEV; + } + + DEBUG("%s, %d\n", __FUNCTION__, ep_index(ep)); + + /* LPD can't report unclaimed bytes from IN fifos */ + if (ep_is_in(ep)) + return -EOPNOTSUPP; + + spin_lock_irqsave(&ep->dev->lock, flags); + jz_udc_select_ep(ep); + + csr = usb_readb(ep->dev, ep->csr); + if (ep->dev->gadget.speed != USB_SPEED_UNKNOWN || + csr & 0x1) { + count = usb_readw(ep->dev, JZ_REG_UDC_OUTCOUNT); + } + + spin_unlock_irqrestore(&ep->dev->lock, flags); + + return count; +} + +/** Flush EP FIFO + * NOTE: Sets INDEX register to EP + */ +static void jz4740_fifo_flush(struct usb_ep *_ep) +{ + struct jz4740_ep *ep; + unsigned long flags; + + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + + ep = container_of(_ep, struct jz4740_ep, ep); + if (unlikely(!_ep || (!ep->desc && ep->type == ep_control))) { + DEBUG("%s, bad ep\n", __FUNCTION__); + return; + } + + spin_lock_irqsave(&ep->dev->lock, flags); + + jz_udc_select_ep(ep); + flush(ep); + + spin_unlock_irqrestore(&ep->dev->lock, flags); +} + +/****************************************************************/ +/* End Point 0 related functions */ +/****************************************************************/ + +/* return: 0 = still running, 1 = completed, negative = errno */ +static int write_fifo_ep0(struct jz4740_ep *ep, struct jz4740_request *req) +{ + uint32_t max; + unsigned count; + int is_last; + + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + max = ep_maxpacket(ep); + + count = write_packet(ep, req, max); + + /* last packet is usually short (or a zlp) */ + if (unlikely(count != max)) + is_last = 1; + else { + if (likely(req->req.length != req->req.actual) || req->req.zero) + is_last = 0; + else + is_last = 1; + } + + DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __FUNCTION__, + ep->ep.name, count, + is_last ? "/L" : "", req->req.length - req->req.actual, req); + + /* requests complete when all IN data is in the FIFO */ + if (is_last) { + done(ep, req, 0); + return 1; + } + + return 0; +} + +static inline int jz4740_fifo_read(struct jz4740_ep *ep, + unsigned char *cp, int max) +{ + int bytes; + int count = usb_readw(ep->dev, JZ_REG_UDC_OUTCOUNT); + + if (count > max) + count = max; + bytes = count; + while (count--) + *cp++ = usb_readb(ep->dev, ep->fifo); + + return bytes; +} + +static inline void jz4740_fifo_write(struct jz4740_ep *ep, + unsigned char *cp, int count) +{ + DEBUG("fifo_write: %d %d\n", ep_index(ep), count); + while (count--) + usb_writeb(ep->dev, ep->fifo, *cp++); +} + +static int read_fifo_ep0(struct jz4740_ep *ep, struct jz4740_request *req) +{ + struct jz4740_udc *dev = ep->dev; + uint32_t csr; + uint8_t *buf; + unsigned bufferspace, count, is_short; + + DEBUG_EP0("%s\n", __FUNCTION__); + + csr = usb_readb(dev, JZ_REG_UDC_CSR0); + if (!(csr & USB_CSR0_OUTPKTRDY)) + return 0; + + buf = req->req.buf + req->req.actual; + prefetchw(buf); + bufferspace = req->req.length - req->req.actual; + + /* read all bytes from this packet */ + if (likely(csr & USB_CSR0_OUTPKTRDY)) { + count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT); + req->req.actual += min(count, bufferspace); + } else /* zlp */ + count = 0; + + is_short = (count < ep->ep.maxpacket); + DEBUG_EP0("read %s %02x, %d bytes%s req %p %d/%d\n", + ep->ep.name, csr, count, + is_short ? "/S" : "", req, req->req.actual, req->req.length); + + while (likely(count-- != 0)) { + uint8_t byte = (uint8_t)usb_readl(dev, ep->fifo); + + if (unlikely(bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data. + */ + if (req->req.status != -EOVERFLOW) + DEBUG_EP0("%s overflow %d\n", ep->ep.name, + count); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + bufferspace--; + } + } + + /* completion */ + if (is_short || req->req.actual == req->req.length) { + done(ep, req, 0); + return 1; + } + + /* finished that packet. the next one may be waiting... */ + return 0; +} + +/** + * udc_set_address - set the USB address for this device + * @address: + * + * Called from control endpoint function after it decodes a set address setup packet. + */ +static void udc_set_address(struct jz4740_udc *dev, unsigned char address) +{ + DEBUG_EP0("%s: %d\n", __FUNCTION__, address); + + usb_writeb(dev, JZ_REG_UDC_FADDR, address); +} + +/* + * DATA_STATE_RECV (USB_CSR0_OUTPKTRDY) + * - if error + * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL bits + * - else + * set USB_CSR0_SVDOUTPKTRDY bit + if last set USB_CSR0_DATAEND bit + */ +static void jz4740_ep0_out(struct jz4740_udc *dev, uint32_t csr, int kickstart) +{ + struct jz4740_request *req; + struct jz4740_ep *ep = &dev->ep[0]; + int ret; + + DEBUG_EP0("%s: %x\n", __FUNCTION__, csr); + + if (list_empty(&ep->queue)) + req = 0; + else + req = list_entry(ep->queue.next, struct jz4740_request, queue); + + if (req) { + if (req->req.length == 0) { + DEBUG_EP0("ZERO LENGTH OUT!\n"); + usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND)); + dev->ep0state = WAIT_FOR_SETUP; + return; + } else if (kickstart) { + usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY)); + return; + } + ret = read_fifo_ep0(ep, req); + if (ret) { + /* Done! */ + DEBUG_EP0("%s: finished, waiting for status\n", + __FUNCTION__); + usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND)); + dev->ep0state = WAIT_FOR_SETUP; + } else { + /* Not done yet.. */ + DEBUG_EP0("%s: not finished\n", __FUNCTION__); + usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY); + } + } else { + DEBUG_EP0("NO REQ??!\n"); + } +} + +/* + * DATA_STATE_XMIT + */ +static int jz4740_ep0_in(struct jz4740_udc *dev, uint32_t csr) +{ + struct jz4740_request *req; + struct jz4740_ep *ep = &dev->ep[0]; + int ret, need_zlp = 0; + + DEBUG_EP0("%s: %x\n", __FUNCTION__, csr); + + if (list_empty(&ep->queue)) + req = 0; + else + req = list_entry(ep->queue.next, struct jz4740_request, queue); + + if (!req) { + DEBUG_EP0("%s: NULL REQ\n", __FUNCTION__); + return 0; + } + + if (req->req.length == 0) { + usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND)); + dev->ep0state = WAIT_FOR_SETUP; + return 1; + } + + if (req->req.length - req->req.actual == EP0_MAXPACKETSIZE) { + /* Next write will end with the packet size, */ + /* so we need zero-length-packet */ + need_zlp = 1; + } + + ret = write_fifo_ep0(ep, req); + + if (ret == 1 && !need_zlp) { + /* Last packet */ + DEBUG_EP0("%s: finished, waiting for status\n", __FUNCTION__); + + usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND)); + dev->ep0state = WAIT_FOR_SETUP; + } else { + DEBUG_EP0("%s: not finished\n", __FUNCTION__); + usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_INPKTRDY); + } + + if (need_zlp) { + DEBUG_EP0("%s: Need ZLP!\n", __FUNCTION__); + usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_INPKTRDY); + dev->ep0state = DATA_STATE_NEED_ZLP; + } + + return 1; +} + +static int jz4740_handle_get_status(struct jz4740_udc *dev, + struct usb_ctrlrequest *ctrl) +{ + struct jz4740_ep *ep0 = &dev->ep[0]; + struct jz4740_ep *qep; + int reqtype = (ctrl->bRequestType & USB_RECIP_MASK); + uint16_t val = 0; + + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + + if (reqtype == USB_RECIP_INTERFACE) { + /* This is not supported. + * And according to the USB spec, this one does nothing.. + * Just return 0 + */ + DEBUG_SETUP("GET_STATUS: USB_RECIP_INTERFACE\n"); + } else if (reqtype == USB_RECIP_DEVICE) { + DEBUG_SETUP("GET_STATUS: USB_RECIP_DEVICE\n"); + val |= (1 << 0); /* Self powered */ + /*val |= (1<<1); *//* Remote wakeup */ + } else if (reqtype == USB_RECIP_ENDPOINT) { + int ep_num = (ctrl->wIndex & ~USB_DIR_IN); + + DEBUG_SETUP + ("GET_STATUS: USB_RECIP_ENDPOINT (%d), ctrl->wLength = %d\n", + ep_num, ctrl->wLength); + + if (ctrl->wLength > 2 || ep_num > 3) + return -EOPNOTSUPP; + + qep = &dev->ep[ep_num]; + if (ep_is_in(qep) != ((ctrl->wIndex & USB_DIR_IN) ? 1 : 0) + && ep_index(qep) != 0) { + return -EOPNOTSUPP; + } + + jz_udc_select_ep(qep); + + /* Return status on next IN token */ + switch (qep->type) { + case ep_control: + val = + (usb_readb(dev, qep->csr) & USB_CSR0_SENDSTALL) == + USB_CSR0_SENDSTALL; + break; + case ep_bulk_in: + case ep_interrupt: + val = + (usb_readb(dev, qep->csr) & USB_INCSR_SENDSTALL) == + USB_INCSR_SENDSTALL; + break; + case ep_bulk_out: + val = + (usb_readb(dev, qep->csr) & USB_OUTCSR_SENDSTALL) == + USB_OUTCSR_SENDSTALL; + break; + } + + /* Back to EP0 index */ + jz_udc_set_index(dev, 0); + + DEBUG_SETUP("GET_STATUS, ep: %d (%x), val = %d\n", ep_num, + ctrl->wIndex, val); + } else { + DEBUG_SETUP("Unknown REQ TYPE: %d\n", reqtype); + return -EOPNOTSUPP; + } + + /* Clear "out packet ready" */ + usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY); + /* Put status to FIFO */ + jz4740_fifo_write(ep0, (uint8_t *)&val, sizeof(val)); + /* Issue "In packet ready" */ + usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND)); + + return 0; +} + +/* + * WAIT_FOR_SETUP (OUTPKTRDY) + * - read data packet from EP0 FIFO + * - decode command + * - if error + * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL bits + * - else + * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND bits + */ +static void jz4740_ep0_setup(struct jz4740_udc *dev, uint32_t csr) +{ + struct jz4740_ep *ep = &dev->ep[0]; + struct usb_ctrlrequest ctrl; + int i; + + DEBUG_SETUP("%s: %x\n", __FUNCTION__, csr); + + /* Nuke all previous transfers */ + nuke(ep, -EPROTO); + + /* read control req from fifo (8 bytes) */ + jz4740_fifo_read(ep, (unsigned char *)&ctrl, 8); + + DEBUG_SETUP("SETUP %02x.%02x v%04x i%04x l%04x\n", + ctrl.bRequestType, ctrl.bRequest, + ctrl.wValue, ctrl.wIndex, ctrl.wLength); + + /* Set direction of EP0 */ + if (likely(ctrl.bRequestType & USB_DIR_IN)) { + ep->bEndpointAddress |= USB_DIR_IN; + } else { + ep->bEndpointAddress &= ~USB_DIR_IN; + } + + /* Handle some SETUP packets ourselves */ + switch (ctrl.bRequest) { + case USB_REQ_SET_ADDRESS: + if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) + break; + + DEBUG_SETUP("USB_REQ_SET_ADDRESS (%d)\n", ctrl.wValue); + udc_set_address(dev, ctrl.wValue); + usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND)); + return; + + case USB_REQ_SET_CONFIGURATION: + if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) + break; + + DEBUG_SETUP("USB_REQ_SET_CONFIGURATION (%d)\n", ctrl.wValue); +/* usb_setb(JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));*/ + + /* Enable RESUME and SUSPEND interrupts */ + usb_setb(dev, JZ_REG_UDC_INTRUSBE, (USB_INTR_RESUME | USB_INTR_SUSPEND)); + break; + + case USB_REQ_SET_INTERFACE: + if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) + break; + + DEBUG_SETUP("USB_REQ_SET_INTERFACE (%d)\n", ctrl.wValue); +/* usb_setb(JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));*/ + break; + + case USB_REQ_GET_STATUS: + if (jz4740_handle_get_status(dev, &ctrl) == 0) + return; + + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + if (ctrl.bRequestType == USB_RECIP_ENDPOINT) { + struct jz4740_ep *qep; + int ep_num = (ctrl.wIndex & 0x0f); + + /* Support only HALT feature */ + if (ctrl.wValue != 0 || ctrl.wLength != 0 + || ep_num > 3 || ep_num < 1) + break; + + qep = &dev->ep[ep_num]; + spin_unlock(&dev->lock); + if (ctrl.bRequest == USB_REQ_SET_FEATURE) { + DEBUG_SETUP("SET_FEATURE (%d)\n", + ep_num); + jz4740_set_halt(&qep->ep, 1); + } else { + DEBUG_SETUP("CLR_FEATURE (%d)\n", + ep_num); + jz4740_set_halt(&qep->ep, 0); + } + spin_lock(&dev->lock); + + jz_udc_set_index(dev, 0); + + /* Reply with a ZLP on next IN token */ + usb_setb(dev, JZ_REG_UDC_CSR0, + (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND)); + return; + } + break; + + default: + break; + } + + /* gadget drivers see class/vendor specific requests, + * {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION}, + * and more. + */ + if (dev->driver) { + /* device-2-host (IN) or no data setup command, process immediately */ + spin_unlock(&dev->lock); + + i = dev->driver->setup(&dev->gadget, &ctrl); + spin_lock(&dev->lock); + + if (unlikely(i < 0)) { + /* setup processing failed, force stall */ + DEBUG_SETUP + (" --> ERROR: gadget setup FAILED (stalling), setup returned %d\n", + i); + jz_udc_set_index(dev, 0); + usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL)); + + /* ep->stopped = 1; */ + dev->ep0state = WAIT_FOR_SETUP; + } + else { + DEBUG_SETUP("gadget driver setup ok (%d)\n", ctrl.wLength); +/* if (!ctrl.wLength) { + usb_setb(JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY); + }*/ + } + } +} + +/* + * DATA_STATE_NEED_ZLP + */ +static void jz4740_ep0_in_zlp(struct jz4740_udc *dev, uint32_t csr) +{ + DEBUG_EP0("%s: %x\n", __FUNCTION__, csr); + + usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND)); + dev->ep0state = WAIT_FOR_SETUP; +} + +/* + * handle ep0 interrupt + */ +static void jz4740_handle_ep0(struct jz4740_udc *dev, uint32_t intr) +{ + struct jz4740_ep *ep = &dev->ep[0]; + uint32_t csr; + + DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + /* Set index 0 */ + jz_udc_set_index(dev, 0); + csr = usb_readb(dev, JZ_REG_UDC_CSR0); + + DEBUG_EP0("%s: csr = %x state = \n", __FUNCTION__, csr);//, state_names[dev->ep0state]); + + /* + * if SENT_STALL is set + * - clear the SENT_STALL bit + */ + if (csr & USB_CSR0_SENTSTALL) { + DEBUG_EP0("%s: USB_CSR0_SENTSTALL is set: %x\n", __FUNCTION__, csr); + usb_clearb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SENDSTALL | USB_CSR0_SENTSTALL); + nuke(ep, -ECONNABORTED); + dev->ep0state = WAIT_FOR_SETUP; + return; + } + + /* + * if a transfer is in progress && INPKTRDY and OUTPKTRDY are clear + * - fill EP0 FIFO + * - if last packet + * - set IN_PKT_RDY | DATA_END + * - else + * set IN_PKT_RDY + */ + if (!(csr & (USB_CSR0_INPKTRDY | USB_CSR0_OUTPKTRDY))) { + DEBUG_EP0("%s: INPKTRDY and OUTPKTRDY are clear\n", + __FUNCTION__); + + switch (dev->ep0state) { + case DATA_STATE_XMIT: + DEBUG_EP0("continue with DATA_STATE_XMIT\n"); + jz4740_ep0_in(dev, csr); + return; + case DATA_STATE_NEED_ZLP: + DEBUG_EP0("continue with DATA_STATE_NEED_ZLP\n"); + jz4740_ep0_in_zlp(dev, csr); + return; + default: + /* Stall? */ +// DEBUG_EP0("Odd state!! state = %s\n", +// state_names[dev->ep0state]); + dev->ep0state = WAIT_FOR_SETUP; + /* nuke(ep, 0); */ + /* usb_setb(ep->csr, USB_CSR0_SENDSTALL); */ +// break; + return; + } + } + + /* + * if SETUPEND is set + * - abort the last transfer + * - set SERVICED_SETUP_END_BIT + */ + if (csr & USB_CSR0_SETUPEND) { + DEBUG_EP0("%s: USB_CSR0_SETUPEND is set: %x\n", __FUNCTION__, csr); + + usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDSETUPEND); + nuke(ep, 0); + dev->ep0state = WAIT_FOR_SETUP; + } + + /* + * if USB_CSR0_OUTPKTRDY is set + * - read data packet from EP0 FIFO + * - decode command + * - if error + * set SVDOUTPKTRDY | DATAEND | SENDSTALL bits + * - else + * set SVDOUTPKTRDY | DATAEND bits + */ + if (csr & USB_CSR0_OUTPKTRDY) { + + DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __FUNCTION__, + csr); + + switch (dev->ep0state) { + case WAIT_FOR_SETUP: + DEBUG_EP0("WAIT_FOR_SETUP\n"); + jz4740_ep0_setup(dev, csr); + break; + + case DATA_STATE_RECV: + DEBUG_EP0("DATA_STATE_RECV\n"); + jz4740_ep0_out(dev, csr, 0); + break; + + default: + /* send stall? */ + DEBUG_EP0("strange state!! 2. send stall? state = %d\n", + dev->ep0state); + break; + } + } +} + +static void jz4740_ep0_kick(struct jz4740_udc *dev, struct jz4740_ep *ep) +{ + uint32_t csr; + + jz_udc_set_index(dev, 0); + + DEBUG_EP0("%s: %x\n", __FUNCTION__, csr); + + /* Clear "out packet ready" */ + + if (ep_is_in(ep)) { + usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY); + csr = usb_readb(dev, JZ_REG_UDC_CSR0); + dev->ep0state = DATA_STATE_XMIT; + jz4740_ep0_in(dev, csr); + } else { + csr = usb_readb(dev, JZ_REG_UDC_CSR0); + dev->ep0state = DATA_STATE_RECV; + jz4740_ep0_out(dev, csr, 1); + } +} + +/** Handle USB RESET interrupt + */ +static void jz4740_reset_irq(struct jz4740_udc *dev) +{ + dev->gadget.speed = (usb_readb(dev, JZ_REG_UDC_POWER) & USB_POWER_HSMODE) ? + USB_SPEED_HIGH : USB_SPEED_FULL; + + DEBUG_SETUP("%s: address = %d, speed = %s\n", __FUNCTION__, 0, + (dev->gadget.speed == USB_SPEED_HIGH) ? "HIGH":"FULL" ); +} + +/* + * jz4740 usb device interrupt handler. + */ +static irqreturn_t jz4740_udc_irq(int irq, void *devid) +{ + struct jz4740_udc *jz4740_udc = devid; + uint8_t index; + + uint32_t intr_usb = usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSB) & 0x7; /* mask SOF */ + uint32_t intr_in = usb_readw(jz4740_udc, JZ_REG_UDC_INTRIN); + uint32_t intr_out = usb_readw(jz4740_udc, JZ_REG_UDC_INTROUT); + uint32_t intr_dma = usb_readb(jz4740_udc, JZ_REG_UDC_INTR); + + if (!intr_usb && !intr_in && !intr_out && !intr_dma) + return IRQ_HANDLED; + + + DEBUG("intr_out=%x intr_in=%x intr_usb=%x\n", + intr_out, intr_in, intr_usb); + + spin_lock(&jz4740_udc->lock); + index = usb_readb(jz4740_udc, JZ_REG_UDC_INDEX); + + /* Check for resume from suspend mode */ + if ((intr_usb & USB_INTR_RESUME) && + (usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSBE) & USB_INTR_RESUME)) { + DEBUG("USB resume\n"); + jz4740_udc->driver->resume(&jz4740_udc->gadget); /* We have suspend(), so we must have resume() too. */ + } + + /* Check for system interrupts */ + if (intr_usb & USB_INTR_RESET) { + DEBUG("USB reset\n"); + jz4740_reset_irq(jz4740_udc); + } + + /* Check for endpoint 0 interrupt */ + if (intr_in & USB_INTR_EP0) { + DEBUG("USB_INTR_EP0 (control)\n"); + jz4740_handle_ep0(jz4740_udc, intr_in); + } + + /* Check for Bulk-IN DMA interrupt */ + if (intr_dma & 0x1) { + int ep_num; + struct jz4740_ep *ep; + ep_num = (usb_readl(jz4740_udc, JZ_REG_UDC_CNTL1) >> 4) & 0xf; + ep = &jz4740_udc->ep[ep_num + 1]; + jz_udc_select_ep(ep); + usb_setb(jz4740_udc, ep->csr, USB_INCSR_INPKTRDY); +/* jz4740_in_epn(jz4740_udc, ep_num, intr_in);*/ + } + + /* Check for Bulk-OUT DMA interrupt */ + if (intr_dma & 0x2) { + int ep_num; + ep_num = (usb_readl(jz4740_udc, JZ_REG_UDC_CNTL2) >> 4) & 0xf; + jz4740_out_epn(jz4740_udc, ep_num, intr_out); + } + + /* Check for each configured endpoint interrupt */ + if (intr_in & USB_INTR_INEP1) { + DEBUG("USB_INTR_INEP1\n"); + jz4740_in_epn(jz4740_udc, 1, intr_in); + } + + if (intr_in & USB_INTR_INEP2) { + DEBUG("USB_INTR_INEP2\n"); + jz4740_in_epn(jz4740_udc, 2, intr_in); + } + + if (intr_out & USB_INTR_OUTEP1) { + DEBUG("USB_INTR_OUTEP1\n"); + jz4740_out_epn(jz4740_udc, 1, intr_out); + } + + /* Check for suspend mode */ + if ((intr_usb & USB_INTR_SUSPEND) && + (usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSBE) & USB_INTR_SUSPEND)) { + DEBUG("USB suspend\n"); + jz4740_udc->driver->suspend(&jz4740_udc->gadget); + /* Host unloaded from us, can do something, such as flushing + the NAND block cache etc. */ + } + + jz_udc_set_index(jz4740_udc, index); + + spin_unlock(&jz4740_udc->lock); + + return IRQ_HANDLED; +} + + + +/*-------------------------------------------------------------------------*/ + + +static inline struct jz4740_udc *gadget_to_udc(struct usb_gadget *gadget) +{ + return container_of(gadget, struct jz4740_udc, gadget); +} + +static int jz4740_udc_get_frame(struct usb_gadget *_gadget) +{ + DEBUG("%s, %p\n", __FUNCTION__, _gadget); + return usb_readw(gadget_to_udc(_gadget), JZ_REG_UDC_FRAME); +} + +static int jz4740_udc_wakeup(struct usb_gadget *_gadget) +{ + /* host may not have enabled remote wakeup */ + /*if ((UDCCS0 & UDCCS0_DRWF) == 0) + return -EHOSTUNREACH; + udc_set_mask_UDCCR(UDCCR_RSM); */ + return -ENOTSUPP; +} + +static int jz4740_udc_pullup(struct usb_gadget *_gadget, int on) +{ + struct jz4740_udc *udc = gadget_to_udc(_gadget); + unsigned long flags; + + local_irq_save(flags); + + if (on) { + udc->state = UDC_STATE_ENABLE; + udc_enable(udc); + } else { + udc->state = UDC_STATE_DISABLE; + udc_disable(udc); + } + + local_irq_restore(flags); + + return 0; +} + + +static const struct usb_gadget_ops jz4740_udc_ops = { + .get_frame = jz4740_udc_get_frame, + .wakeup = jz4740_udc_wakeup, + .pullup = jz4740_udc_pullup, + .start = jz4740_udc_start, + .stop = jz4740_udc_stop, +}; + +static struct usb_ep_ops jz4740_ep_ops = { + .enable = jz4740_ep_enable, + .disable = jz4740_ep_disable, + + .alloc_request = jz4740_alloc_request, + .free_request = jz4740_free_request, + + .queue = jz4740_queue, + .dequeue = jz4740_dequeue, + + .set_halt = jz4740_set_halt, + .fifo_status = jz4740_fifo_status, + .fifo_flush = jz4740_fifo_flush, +}; + + +/*-------------------------------------------------------------------------*/ + +static struct jz4740_udc jz4740_udc_controller = { + .gadget = { + .ops = &jz4740_udc_ops, + .ep0 = &jz4740_udc_controller.ep[0].ep, + .name = "jz4740-udc", + .dev = { + .init_name = "gadget", + }, + }, + + /* control endpoint */ + .ep[0] = { + .ep = { + .name = "ep0", + .ops = &jz4740_ep_ops, + .maxpacket = EP0_MAXPACKETSIZE, + }, + .dev = &jz4740_udc_controller, + + .bEndpointAddress = 0, + .bmAttributes = 0, + + .type = ep_control, + .fifo = JZ_REG_UDC_EP_FIFO(0), + .csr = JZ_REG_UDC_CSR0, + }, + + /* bulk out endpoint */ + .ep[1] = { + .ep = { + .name = "ep1out-bulk", + .ops = &jz4740_ep_ops, + .maxpacket = EPBULK_MAXPACKETSIZE, + }, + .dev = &jz4740_udc_controller, + + .bEndpointAddress = 1, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + + .type = ep_bulk_out, + .fifo = JZ_REG_UDC_EP_FIFO(1), + .csr = JZ_REG_UDC_OUTCSR, + }, + + /* bulk in endpoint */ + .ep[2] = { + .ep = { + .name = "ep1in-bulk", + .ops = &jz4740_ep_ops, + .maxpacket = EPBULK_MAXPACKETSIZE, + }, + .dev = &jz4740_udc_controller, + + .bEndpointAddress = 1 | USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + + .type = ep_bulk_in, + .fifo = JZ_REG_UDC_EP_FIFO(1), + .csr = JZ_REG_UDC_INCSR, + }, + + /* interrupt in endpoint */ + .ep[3] = { + .ep = { + .name = "ep2in-int", + .ops = &jz4740_ep_ops, + .maxpacket = EPINTR_MAXPACKETSIZE, + }, + .dev = &jz4740_udc_controller, + + .bEndpointAddress = 2 | USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + + .type = ep_interrupt, + .fifo = JZ_REG_UDC_EP_FIFO(2), + .csr = JZ_REG_UDC_INCSR, + }, +}; + +static int __devinit jz4740_udc_probe(struct platform_device *pdev) +{ + struct jz4740_udc *jz4740_udc = &jz4740_udc_controller; + int ret; + + spin_lock_init(&jz4740_udc->lock); + + jz4740_udc->dev = &pdev->dev; + jz4740_udc->gadget.dev.parent = &pdev->dev; + jz4740_udc->gadget.dev.dma_mask = pdev->dev.dma_mask; + + ret = device_register(&jz4740_udc->gadget.dev); + if (ret) + return ret; + + jz4740_udc->clk = clk_get(&pdev->dev, "udc"); + if (IS_ERR(jz4740_udc->clk)) { + ret = PTR_ERR(jz4740_udc->clk); + dev_err(&pdev->dev, "Failed to get udc clock: %d\n", ret); + goto err_device_unregister; + } + + platform_set_drvdata(pdev, jz4740_udc); + + jz4740_udc->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!jz4740_udc->mem) { + ret = -ENOENT; + dev_err(&pdev->dev, "Failed to get mmio memory resource\n"); + goto err_clk_put; + } + + jz4740_udc->mem = request_mem_region(jz4740_udc->mem->start, + resource_size(jz4740_udc->mem), pdev->name); + + if (!jz4740_udc->mem) { + ret = -EBUSY; + dev_err(&pdev->dev, "Failed to request mmio memory region\n"); + goto err_device_unregister; + } + + jz4740_udc->base = ioremap(jz4740_udc->mem->start, resource_size(jz4740_udc->mem)); + + if (!jz4740_udc->base) { + ret = -EBUSY; + dev_err(&pdev->dev, "Failed to ioremap mmio memory\n"); + goto err_release_mem_region; + } + + jz4740_udc->irq = platform_get_irq(pdev, 0); + ret = request_irq(jz4740_udc->irq, jz4740_udc_irq, 0, pdev->name, + jz4740_udc); + if (ret) { + dev_err(&pdev->dev, "Failed to request irq: %d\n", ret); + goto err_iounmap; + } + + ret = usb_add_gadget_udc(&pdev->dev, &jz4740_udc->gadget); + if (ret) { + dev_err(&pdev->dev, "Failed to add gadget: %d\n", ret); + goto err_free_irq; + } + + udc_disable(jz4740_udc); + udc_reinit(jz4740_udc); + + return 0; + +err_free_irq: + free_irq(jz4740_udc->irq, pdev); +err_iounmap: + iounmap(jz4740_udc->base); +err_release_mem_region: + release_mem_region(jz4740_udc->mem->start, resource_size(jz4740_udc->mem)); +err_clk_put: + clk_put(jz4740_udc->clk); +err_device_unregister: + device_unregister(&jz4740_udc->gadget.dev); + platform_set_drvdata(pdev, NULL); + + return ret; +} + +static int __devexit jz4740_udc_remove(struct platform_device *pdev) +{ + struct jz4740_udc *dev = platform_get_drvdata(pdev); + + usb_del_gadget_udc(&dev->gadget); + if (dev->driver) + return -EBUSY; + + udc_disable(dev); + + free_irq(dev->irq, dev); + iounmap(dev->base); + release_mem_region(dev->mem->start, resource_size(dev->mem)); + clk_put(dev->clk); + + platform_set_drvdata(pdev, NULL); + device_unregister(&dev->gadget.dev); + + return 0; +} + +#ifdef CONFIG_PM + +static int jz4740_udc_suspend(struct device *dev) +{ + struct jz4740_udc *jz4740_udc = dev_get_drvdata(dev); + + if (jz4740_udc->state == UDC_STATE_ENABLE) + udc_disable(jz4740_udc); + + return 0; +} + +static int jz4740_udc_resume(struct device *dev) +{ + struct jz4740_udc *jz4740_udc = dev_get_drvdata(dev); + + if (jz4740_udc->state == UDC_STATE_ENABLE) + udc_enable(jz4740_udc); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(jz4740_udc_pm_ops, jz4740_udc_suspend, jz4740_udc_resume); +#define JZ4740_UDC_PM_OPS (&jz4740_udc_pm_ops) + +#else +#define JZ4740_UDC_PM_OPS NULL +#endif + +static struct platform_driver udc_driver = { + .probe = jz4740_udc_probe, + .remove = __devexit_p(jz4740_udc_remove), + .driver = { + .name = "jz-udc", + .owner = THIS_MODULE, + .pm = JZ4740_UDC_PM_OPS, + }, +}; + +/*-------------------------------------------------------------------------*/ + +static int __init udc_init (void) +{ + return platform_driver_register(&udc_driver); +} +module_init(udc_init); + +static void __exit udc_exit (void) +{ + platform_driver_unregister(&udc_driver); +} +module_exit(udc_exit); + +MODULE_DESCRIPTION("JZ4740 USB Device Controller"); +MODULE_AUTHOR("Wei Jianli "); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/jz4740_udc.h b/drivers/usb/gadget/jz4740_udc.h new file mode 100644 index 0000000..53fd1da --- /dev/null +++ b/drivers/usb/gadget/jz4740_udc.h @@ -0,0 +1,101 @@ +/* + * linux/drivers/usb/gadget/jz4740_udc.h + * + * Ingenic JZ4740 on-chip high speed USB device controller + * + * Copyright (C) 2006 Ingenic Semiconductor Inc. + * Author: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __USB_GADGET_JZ4740_H__ +#define __USB_GADGET_JZ4740_H__ + +/*-------------------------------------------------------------------------*/ + +// Max packet size +#define EP0_MAXPACKETSIZE 64 +#define EPBULK_MAXPACKETSIZE 512 +#define EPINTR_MAXPACKETSIZE 64 + +#define UDC_MAX_ENDPOINTS 4 + +/*-------------------------------------------------------------------------*/ + +enum ep_type { + ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt +}; + +struct jz4740_ep { + struct usb_ep ep; + struct jz4740_udc *dev; + + const struct usb_endpoint_descriptor *desc; + + uint8_t stopped; + uint8_t bEndpointAddress; + uint8_t bmAttributes; + + enum ep_type type; + size_t fifo; + uint32_t csr; + + uint32_t reg_addr; + struct list_head queue; +}; + +struct jz4740_request { + struct usb_request req; + struct list_head queue; +}; + +enum ep0state { + WAIT_FOR_SETUP, /* between STATUS ack and SETUP report */ + DATA_STATE_XMIT, /* data tx stage */ + DATA_STATE_NEED_ZLP, /* data tx zlp stage */ + WAIT_FOR_OUT_STATUS, /* status stages */ + DATA_STATE_RECV, /* data rx stage */ +}; + +/* For function binding with UDC Disable - Added by River */ +typedef enum { + UDC_STATE_ENABLE = 0, + UDC_STATE_DISABLE, +}udc_state_t; + +struct jz4740_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct device *dev; + spinlock_t lock; + unsigned long lock_flags; + + enum ep0state ep0state; + struct jz4740_ep ep[UDC_MAX_ENDPOINTS]; + + udc_state_t state; + + struct resource *mem; + void __iomem *base; + int irq; + + struct clk *clk; +}; + +#define ep_maxpacket(EP) ((EP)->ep.maxpacket) + +static inline bool ep_is_in(const struct jz4740_ep *ep) +{ + return (ep->bEndpointAddress & USB_DIR_IN) == USB_DIR_IN; +} + +static inline uint8_t ep_index(const struct jz4740_ep *ep) +{ + return ep->bEndpointAddress & 0xf; +} + +#endif /* __USB_GADGET_JZ4740_H__ */ -- 1.7.5.4