From eee43706c5969f5d99096dddefae3be0c41a6ed2 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Thu, 13 Nov 2008 08:29:11 +0000 Subject: [PATCH] [ARM] S3C24xx: Add preliminary E-TEN glofiish M800 support This patch adds preliminary support for the M800. If booted through haret, the system has the following working components: * NAND read support * framebuffer / LCM (no jbt6k74 power management yet) * USB device controller (incl. Pullup) * microSD card (incl. card-detect) * backlight brightness control (using gta01-bl.c) * input event device for power, camera and record button * input event device for keyboard slide event * bluetooth power control (using gta01-pm-bt) Many things are still missing, like * NAND write support * GPS power control * GSM/3G modem interface * capsense buttons, joystick and querty-keyboard * camera * audio Signed-off-by: Harald Welte --- arch/arm/mach-s3c2440/Kconfig | 7 +++++++ arch/arm/mach-s3c2440/Makefile | 1 + arch/arm/plat-s3c24xx/neo1973_pm_bt.c | 17 +++++++++++++++++ arch/arm/tools/mach-types | 1 + drivers/input/keyboard/Kconfig | 11 +++++++++++ drivers/input/keyboard/Makefile | 1 + drivers/mtd/nand/nand_bbt.c | 2 ++ 7 files changed, 40 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 4a211d8..4c3b6b2 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -98,6 +98,13 @@ config NEO1973_GTA02_2440 Say Y here if you are using an early hardware revision of the FIC/Openmoko Neo1973 GTA02 GSM Phone. +config MACH_M800 + bool "E-TEN glofiish M800/X800" + select CPU_S3C2442 + help + Say Y here if you are using the E-TEN glofiish M800/X800. + + endmenu #source "arch/arm/mach-s3c2440/camera/Kconfig" diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile index e3ca9e3..8617820 100644 --- a/arch/arm/mach-s3c2440/Makefile +++ b/arch/arm/mach-s3c2440/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o obj-$(CONFIG_MACH_HXD8) += mach-hxd8.o obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o +obj-$(CONFIG_MACH_M800) += mach-glofiish.o diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c index dfc9ae8..dcb251b 100644 --- a/arch/arm/plat-s3c24xx/neo1973_pm_bt.c +++ b/arch/arm/plat-s3c24xx/neo1973_pm_bt.c @@ -30,6 +30,9 @@ #include #endif +#ifdef CONFIG_MACH_M800 +#include +#endif #define DRVMSG "FIC Neo1973 Bluetooth Power Management" @@ -56,6 +59,14 @@ static ssize_t bt_read(struct device *dev, struct device_attribute *attr, break; #endif /* CONFIG_MACH_NEO1973_GTA02 */ +#ifdef CONFIG_MACH_M800 + case MACH_TYPE_M800: + if (s3c2410_gpio_getpin(M800_GPIO_BT_POWER_1) && + s3c2410_gpio_getpin(M800_GPIO_BT_POWER_2)) + goto out_1; + break; +#endif /* CONFIG_MACH_M800 */ + } } else if (!strcmp(attr->attr.name, "reset")) { switch (machine_arch_type) { @@ -121,6 +132,12 @@ static ssize_t bt_write(struct device *dev, struct device_attribute *attr, break; #endif /* CONFIG_MACH_NEO1973_GTA02 */ +#ifdef CONFIG_MACH_M800 + case MACH_TYPE_M800: + s3c2410_gpio_setpin(M800_GPIO_BT_POWER_1, on); + s3c2410_gpio_setpin(M800_GPIO_BT_POWER_2, on); + break; +#endif /* CONFIG_MACH_M800 */ } } else if (!strcmp(attr->attr.name, "reset")) { /* reset is low-active, so we need to invert */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 0a9a5e7..2578091 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -1367,3 +1367,4 @@ db88f5281 MACH_DB88F5281 DB88F5281 1358 csb726 MACH_CSB726 CSB726 1359 tik27 MACH_TIK27 TIK27 1360 mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361 +m800 MACH_M800 M800 1772 diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index a61ca45..68a893f 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -304,6 +304,17 @@ config KEYBOARD_NEO1973 To compile this driver as a module, choose M here: the module will be called neo1973kbd. +config KEYBOARD_M800 + tristate "E-TEN glofiish M800 buttons" + depends on MACH_M800 + default y + help + Say Y here to enable the buttons on the E-TEN glofiish + M800 GSM phone. + + To compile this driver as a module, choose M here: the + module will be called m800kbd. + config KEYBOARD_QT2410 tristate "QT2410 buttons" depends on MACH_QT2410 diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 34bfc33..005a050 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o obj-$(CONFIG_KEYBOARD_NEO1973) += neo1973kbd.o +obj-$(CONFIG_KEYBOARD_M800) += m800kbd.o obj-$(CONFIG_KEYBOARD_QT2410) += qt2410kbd.o obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 5e121ce..7e20816 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -430,8 +430,10 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, if (ret) { this->bbt[i >> 3] |= 0x03 << (i & 0x6); +#if 0 printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n", i >> 1, (unsigned int)from); +#endif mtd->ecc_stats.badblocks++; } -- 1.5.6.5