/*++ Copyright (c) Realtek Semiconductor Corp. All rights reserved. Module Name: Hal8812PwrSeq.c Abstract: This file includes all kinds of Power Action event for RTL8812 and corresponding hardware configurtions which are released from HW SD. Major Change History: When Who What ---------- --------------- ------------------------------- 2011-10-26 William Create. --*/ #ifdef CONFIG_RTL_8812_SUPPORT #include "HalPwrSeqCmd.h" #include "Hal8812PwrSeq.h" /* drivers should parse below arrays and do the corresponding actions */ //3 Power on Array WLAN_PWR_CFG rtl8812_power_on_flow[RTL8812_TRANS_CARDEMU_TO_ACT_STEPS+RTL8812_TRANS_END_STEPS]= { RTL8812_TRANS_CARDEMU_TO_ACT RTL8812_TRANS_END }; //3Radio off GPIO Array WLAN_PWR_CFG rtl8812_radio_off_flow[RTL8812_TRANS_ACT_TO_CARDEMU_STEPS+RTL8812_TRANS_END_STEPS]= { RTL8812_TRANS_ACT_TO_CARDEMU RTL8812_TRANS_END }; //3Card Disable Array WLAN_PWR_CFG rtl8812_card_disable_flow[RTL8812_TRANS_ACT_TO_CARDEMU_STEPS+RTL8812_TRANS_CARDEMU_TO_PDN_STEPS+RTL8812_TRANS_END_STEPS]= { RTL8812_TRANS_ACT_TO_CARDEMU RTL8812_TRANS_CARDEMU_TO_CARDDIS RTL8812_TRANS_END }; //3 Card Enable Array WLAN_PWR_CFG rtl8812_card_enable_flow[RTL8812_TRANS_ACT_TO_CARDEMU_STEPS+RTL8812_TRANS_CARDEMU_TO_PDN_STEPS+RTL8812_TRANS_END_STEPS]= { RTL8812_TRANS_CARDDIS_TO_CARDEMU RTL8812_TRANS_CARDEMU_TO_ACT RTL8812_TRANS_END }; //3Suspend Array WLAN_PWR_CFG rtl8812_suspend_flow[RTL8812_TRANS_ACT_TO_CARDEMU_STEPS+RTL8812_TRANS_CARDEMU_TO_SUS_STEPS+RTL8812_TRANS_END_STEPS]= { RTL8812_TRANS_ACT_TO_CARDEMU RTL8812_TRANS_CARDEMU_TO_SUS RTL8812_TRANS_END }; //3 Resume Array WLAN_PWR_CFG rtl8812_resume_flow[RTL8812_TRANS_ACT_TO_CARDEMU_STEPS+RTL8812_TRANS_CARDEMU_TO_SUS_STEPS+RTL8812_TRANS_END_STEPS]= { RTL8812_TRANS_SUS_TO_CARDEMU RTL8812_TRANS_CARDEMU_TO_ACT RTL8812_TRANS_END }; //3HWPDN Array WLAN_PWR_CFG rtl8812_hwpdn_flow[RTL8812_TRANS_ACT_TO_CARDEMU_STEPS+RTL8812_TRANS_CARDEMU_TO_PDN_STEPS+RTL8812_TRANS_END_STEPS]= { RTL8812_TRANS_ACT_TO_CARDEMU RTL8812_TRANS_CARDEMU_TO_PDN RTL8812_TRANS_END }; //3 Enter LPS WLAN_PWR_CFG rtl8812_enter_lps_flow[RTL8812_TRANS_ACT_TO_LPS_STEPS+RTL8812_TRANS_END_STEPS]= { //FW behavior RTL8812_TRANS_ACT_TO_LPS RTL8812_TRANS_END }; //3 Leave LPS WLAN_PWR_CFG rtl8812_leave_lps_flow[RTL8812_TRANS_LPS_TO_ACT_STEPS+RTL8812_TRANS_END_STEPS]= { //FW behavior RTL8812_TRANS_LPS_TO_ACT RTL8812_TRANS_END }; #endif //CONFIG_RTL_8812_SUPPORT