/* SPI Flash driver
 *
 * Written by sam (sam@realtek.com)
 * 2010-05-01
 *
 */

#include "../../../../include/linux/autoconf.h"

#if defined(CONFIG_RTL_8198)
	#define CONFIG_RTL8198 1
#endif

//#define CONFIG_SPI_STD_MODE 1
//#define SPI_KERNEL 1
#ifdef SPI_KERNEL
	#ifdef CONFIG_RTL8198
		#define SPI_DRIVER_MODE	0
	#else
		#define SPI_DRIVER_MODE	1
	#endif
#else
	#ifdef CONFIG_RTL8198
		#define SPI_DRIVER_MODE	0
	#else
		#ifdef CONFIG_SPI_STD_MODE
			#define SPI_DRIVER_MODE	0
		#else
			#define SPI_DRIVER_MODE	1
		#endif
	#endif
#endif

typedef unsigned int (*FUNC_ERASE)(unsigned char ucChip, unsigned int uiAddr);
typedef unsigned int (*FUNC_READ)(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);
typedef unsigned int (*FUNC_WRITE)(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);
typedef unsigned int (*FUNC_SETQEBIT)(unsigned char ucChip);
typedef unsigned int (*FUNC_PAGEWRITE)(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);

struct spi_flash_type
{
	unsigned int	chip_id;
	unsigned char	mfr_id;
	unsigned char	dev_id;

	unsigned char	capacity_id;
	unsigned char	size_shift;

	unsigned char	device_size;        // 2 ^ N (bytes)
	unsigned int	chip_size;

	unsigned int	block_size;
	unsigned int	block_cnt;

	unsigned int	sector_size;
	unsigned int	sector_cnt;

	unsigned int	page_size;
	unsigned int	page_cnt;
	unsigned int	chip_clk;
	char*			chip_name;

	unsigned int	chipClock;
	FUNC_ERASE		pfErase;
	FUNC_WRITE		pfWrite;
	FUNC_READ		pfRead;
	FUNC_SETQEBIT	pfQeBit;
	FUNC_PAGEWRITE	pfPageWrite;
};

struct spi_flash_known
{
	unsigned int	uiChipId;
	unsigned int	uiDistinguish;
	unsigned int	uiCapacityId;
	unsigned int	uiBlockSize;
	unsigned int	uiSectorSize;
	unsigned int	uiPageSize;
	char*			pcChipName;
	unsigned int	chipClock;

	FUNC_ERASE		pfErase;
	FUNC_READ		pfRead;
	FUNC_SETQEBIT	pfQeBit;
	FUNC_PAGEWRITE	pfPageWrite;
};


/****************************** Common0 ******************************/
void spi_regist(unsigned char ucChip);
void set_flash_info(unsigned char ucChip, unsigned int chip_id, unsigned int device_cap, unsigned int block_size, unsigned int sector_size, unsigned int page_size, char* chip_name, FUNC_ERASE pfErase, FUNC_READ pfRead, FUNC_SETQEBIT pfQeBit, FUNC_PAGEWRITE pfPageWrite, unsigned int chipClock);

/****************************** Common ******************************/
// get Dram Frequence
unsigned int CheckDramFreq(void);                       //JSW:For 8196C
// Set FSCR register
void setFSCR(unsigned char ucChip, unsigned int uiClkMhz, unsigned int uiRBO, unsigned int uiWBO, unsigned int uiTCS);
// Calculate write address group
void calAddr(unsigned int uiStart, unsigned int uiLenth, unsigned int uiSectorSize, unsigned int* uiStartAddr, unsigned int*  uiStartLen, unsigned int* uiSectorAddr, unsigned int* uiSectorCount, unsigned int* uiEndAddr, unsigned int* uiEndLen);
// Calculate chip capacity shift bit 
unsigned char calShift(unsigned char ucCapacityId, unsigned char ucChipSize);
// Print spi_flash_type
void prnFlashInfo(unsigned char ucChip, struct spi_flash_type sftInfo);
// Check WIP bit
unsigned int spiFlashReady(unsigned char ucChip);
//toggle CS
void rstSPIFlash(unsigned char ucChip);

/****************************** Layer 1 ******************************/
//set cs low
void SFCSR_CS_L(unsigned char ucChip, unsigned char ucLen, unsigned char ucIOWidth);
// set cs high
void SFCSR_CS_H(unsigned char ucChip, unsigned char ucLen, unsigned char ucIOWidth);
// Read Identification (RDID) Sequence (Command 9F)
unsigned int ComSrlCmd_RDID(unsigned char ucChip, unsigned int uiLen);
// One byte Command
void SeqCmd_Order(unsigned char ucChip,  unsigned char ucIOWidth, unsigned int uiCmd);
// One byte Command Write
void SeqCmd_Write(unsigned char ucChip,  unsigned char ucIOWidth, unsigned int uiCmd, unsigned int uiValue, unsigned char ucValueLen);
// One byte Command Read
unsigned int SeqCmd_Read(unsigned char ucChip,  unsigned char ucIOWidth, unsigned int uiCmd, unsigned char ucRDLen);

/****************************** Layer 2 ******************************/
// Sector Erase (SE) Sequence (Command 20)
unsigned int ComSrlCmd_SE(unsigned char ucChip, unsigned int uiAddr);
// Block Erase (BE) Sequence (Command D8)
unsigned int ComSrlCmd_BE(unsigned char ucChip, unsigned int uiAddr);
// Chip Erase (CE) Sequence (Command 60 or C7)
unsigned int ComSrlCmd_CE(unsigned char ucChip);
// without QE bit
unsigned int ComSrlCmd_NoneQeBit(unsigned char ucChip);
// uiIsFast: = 0 cmd, address, dummy single IO ; =1 cmd single IO, address and dummy multi IO; =2 cmd, address and dummy multi IO;
void ComSrlCmd_InputCommand(unsigned char ucChip, unsigned int uiAddr, unsigned int uiCmd, unsigned char ucIsFast, unsigned char ucIOWidth, unsigned char ucDummyCount);
// Set SFCR2 for memery map read
unsigned int SetSFCR2(unsigned int uiCmd, unsigned char ucIsFast, unsigned char ucIOWidth, unsigned char ucDummyCount);
// read function template
unsigned int ComSrlCmd_ComRead(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer,unsigned int uiCmd, unsigned char ucIsFast, unsigned char ucIOWidth, unsigned char ucDummyCount);
// write template
unsigned int ComSrlCmd_ComWrite(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer, unsigned int uiCmd, unsigned char ucIsFast, unsigned char ucIOWidth, unsigned char ucDummyCount);
// write a sector once
unsigned int ComSrlCmd_ComWriteSector(unsigned char ucChip, unsigned int uiAddr, unsigned char* pucBuffer);
// write sector use malloc buffer
unsigned int ComSrlCmd_BufWriteSector(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);
// write function
unsigned int ComSrlCmd_ComWriteData(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);

/****************************** Macronix ******************************/
// MX25L1605 MX25L3205 Read at High Speed (FAST_READ) Sequence (Command 0B)
unsigned int SpiRead_11110B(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);
// Page Program (PP) Sequence (Command 02)
unsigned int PageWrite_111002(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);

#if (SPI_DRIVER_MODE == 1)
// Set quad enable bit
unsigned int mxic_spi_setQEBit(unsigned char ucChip);
// MX25L1605 MX25L3205 Read at Dual IO Mode Sequence (Command BB)
unsigned int SpiRead_1221BB(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);
// MX25L1635 MX25L3235 4 x I/O Read Mode Sequence (Command EB)
unsigned int SpiRead_1443EB(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);
// 4 x I/O Page Program (4PP) Sequence (Command 38)
unsigned int PageWrite_144038(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);
#endif

/****************************** SST ******************************/
// Layer1 SST Byte-Program
void SstComSrlCmd_BP(unsigned char ucChip, unsigned int uiAddr, unsigned char ucValue);
// Layer2 Sector Write Use BP Mode
unsigned int sst_PageWrite_s1(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);

/****************************** Spansion ******************************/
#if (SPI_DRIVER_MODE == 1)
// Layer2 Spansion Set QE bit
unsigned int span_spi_setQEBit(unsigned char ucChip);
// Quad Page Programming (Command 32)
unsigned int PageWrite_114032(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);
#endif

/****************************** Winbond ******************************/
#if (SPI_DRIVER_MODE == 1)
// Layer3 Winbond Set QE Bit
unsigned int wb_spi_setQEBit(unsigned char ucChip);
#endif

/****************************** Eon ******************************/


/****************************** Giga Device ******************************/
#if (SPI_DRIVER_MODE == 1)
// Set quad enable bit
unsigned int gd_spi_setQEBit(unsigned char ucChip);
// High Performance Mode (HPM) (A3H)
unsigned int GdCmdSrl_HPM(unsigned char ucChip);
#endif

/****************************** ATMEL ******************************/
#if (SPI_DRIVER_MODE == 1)
// AT25DF161 Dual-Output Read Array(Command 3B)
unsigned int SpiRead_11213B(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);
// AT25DF161 Dual-Input Byte/Page Program(Command A2)
unsigned int PageWrite_1120A2(unsigned char ucChip, unsigned int uiAddr, unsigned int uiLen, unsigned char* pucBuffer);
#endif