From 63e56392b9024aceb610d7b4e1979e2d2cebd217 Mon Sep 17 00:00:00 2001 From: Marat Radchenko Date: Tue, 18 Oct 2011 21:48:23 +0400 Subject: [PATCH 1/2] TSC2301 driver (touchscreen and keypad) This patch adds support for TSC2301 touchscreen/keypad/audio chip found on Nokia N800. Touchscreen and keypad are fully functional, audio part only provides power management. --- drivers/input/keyboard/Kconfig | 6 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/tsc2301_kp.c | 475 +++++++++++++++ drivers/input/touchscreen/Kconfig | 6 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/tsc2301_ts.c | 676 +++++++++++++++++++++ drivers/spi/Kconfig | 22 + drivers/spi/Makefile | 3 + drivers/spi/tsc2301-core.c | 297 ++++++++++ drivers/spi/tsc2301-mixer.c | 1003 ++++++++++++++++++++++++++++++++ include/linux/spi/tsc2301.h | 208 +++++++ 11 files changed, 2698 insertions(+), 0 deletions(-) create mode 100644 drivers/input/keyboard/tsc2301_kp.c create mode 100644 drivers/input/touchscreen/tsc2301_ts.c create mode 100644 drivers/spi/tsc2301-core.c create mode 100644 drivers/spi/tsc2301-mixer.c create mode 100644 include/linux/spi/tsc2301.h Index: linux-3.1/drivers/input/keyboard/Kconfig =================================================================== --- linux-3.1.orig/drivers/input/keyboard/Kconfig 2011-10-30 00:48:29.357056963 +0200 +++ linux-3.1/drivers/input/keyboard/Kconfig 2011-10-30 00:48:48.989043470 +0200 @@ -530,6 +530,12 @@ config KEYBOARD_TNETV107X To compile this driver as a module, choose M here: the module will be called tnetv107x-keypad. +config KEYBOARD_TSC2301 + tristate "TSC2301 keypad support" + depends on SPI_TSC2301 + help + Say Y here for if you are using the keypad features of TSC2301. + config KEYBOARD_TWL4030 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" depends on TWL4030_CORE Index: linux-3.1/drivers/input/keyboard/Makefile =================================================================== --- linux-3.1.orig/drivers/input/keyboard/Makefile 2011-10-30 00:48:29.365056957 +0200 +++ linux-3.1/drivers/input/keyboard/Makefile 2011-10-30 00:48:48.989043470 +0200 @@ -48,6 +48,7 @@ obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o obj-$(CONFIG_KEYBOARD_TNETV107X) += tnetv107x-keypad.o +obj-$(CONFIG_KEYBOARD_TSC2301) += tsc2301_kp.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o Index: linux-3.1/drivers/input/keyboard/tsc2301_kp.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-3.1/drivers/input/keyboard/tsc2301_kp.c 2011-10-30 00:48:48.989043470 +0200 @@ -0,0 +1,475 @@ +/* + * TSC2301 keypad driver + * + * Copyright (C) 2005-2006 Nokia Corporation + * + * Written by Jarkko Oikarinen + * Rewritten by Juha Yrjola + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define TSC2301_KEYBOARD_PRODUCT_ID 0x0051 +#define TSC2301_KEYBOARD_PRODUCT_VERSION 0x0001 +#define TSC2301_DEBOUNCE_TIME_2MS 0x0000 +#define TSC2301_DEBOUNCE_TIME_10MS 0x0800 +#define TSC2301_DEBOUNCE_TIME_20MS 0x1000 +#define TSC2301_DEBOUNCE_TIME_50MS 0x1800 +#define TSC2301_DEBOUNCE_TIME_60MS 0x2000 +#define TSC2301_DEBOUNCE_TIME_80MS 0x2800 +#define TSC2301_DEBOUNCE_TIME_100MS 0x3000 +#define TSC2301_DEBOUNCE_TIME_120MS 0x3800 + +#define TSC2301_DEBOUNCE_TIME TSC2301_DEBOUNCE_TIME_20MS + +#define TSC2301_RELEASE_TIMEOUT 50 + +struct tsc2301_kp { + struct input_dev *idev; + char phys[32]; + spinlock_t lock; + struct mutex mutex; + struct timer_list timer; + u16 keys_pressed; + unsigned pending:1; + unsigned user_disabled:1; + unsigned disable_depth; + + struct spi_transfer read_xfer[4]; + struct spi_message read_msg; + + u16 data; + u16 mask; + + int irq; + s16 keymap[16]; +}; + +static inline int tsc2301_kp_disabled(struct tsc2301 *tsc) +{ + return tsc->kp->disable_depth != 0; +} + +static void tsc2301_kp_send_key_events(struct tsc2301 *tsc, + u16 prev_state, + u16 new_state) +{ + struct tsc2301_kp *kp = tsc->kp; + u16 common, released, pressed; + int i; + + common = prev_state & new_state; + released = common ^ prev_state; + pressed = common ^ new_state; + if (!released && !pressed) + return; + for (i = 0; i < 16 && (released || pressed); i++) { + if (released & 1) { + dev_dbg(&tsc->spi->dev, "key %d released\n", i); + input_report_key(kp->idev, kp->keymap[i], 0); + } + released >>= 1; + if (pressed & 1) { + dev_dbg(&tsc->spi->dev, "key %d pressed\n", i); + input_report_key(kp->idev, kp->keymap[i], 1); + } + pressed >>= 1; + } + input_sync(kp->idev); +} + +static inline void _filter_out(struct tsc2301 *tsc, u16 prev_state, + u16 *new_state, int row1, int row2, u8 rect_pat) +{ + u16 mask; + + mask = (rect_pat << (row1 * 4)) | (rect_pat << (row2 * 4)); + mask &= ~prev_state; + *new_state &= ~mask; + dev_dbg(&tsc->spi->dev, "filtering ghost keys %02x\n", mask); +} + +static void tsc2301_filter_ghost_keys(struct tsc2301 *tsc, u16 prev_state, + u16 *new_state) +{ + int row1, row2; + u16 key_map; + u16 row1_map; + static const u8 rect_pat[] = { + 0x3, 0x5, 0x9, 0x6, 0xa, 0xc, 0, + }; + + key_map = *new_state; + for (row1 = 0; row1 < 4; row1++) { + row1_map = (key_map >> (row1 * 4)) & 0xf; + if (!row1_map) + continue; + for (row2 = row1 + 1; row2 < 4; row2++) { + u16 rect_map = (key_map >> (row2 * 4)) & 0xf; + const u8 *rp; + + rect_map &= row1_map; + if (!rect_map) + continue; + for (rp = rect_pat; *rp; rp++) + if ((rect_map & *rp) == *rp) + _filter_out(tsc, prev_state, new_state, + row1, row2, *rp); + } + } +} + +static void tsc2301_kp_timer(unsigned long arg) +{ + struct tsc2301 *tsc = (void *) arg; + struct tsc2301_kp *kp = tsc->kp; + unsigned long flags; + + tsc2301_kp_send_key_events(tsc, kp->keys_pressed, 0); + spin_lock_irqsave(&kp->lock, flags); + kp->keys_pressed = 0; + spin_unlock_irqrestore(&kp->lock, flags); +} + +static void tsc2301_kp_rx(void *arg) +{ + struct tsc2301 *tsc = arg; + struct tsc2301_kp *kp = tsc->kp; + unsigned long flags; + u16 kp_data; + + kp_data = kp->data; + dev_dbg(&tsc->spi->dev, "KP data %04x\n", kp_data); + + tsc2301_filter_ghost_keys(tsc, kp->keys_pressed, &kp_data); + tsc2301_kp_send_key_events(tsc, kp->keys_pressed, kp_data); + spin_lock_irqsave(&kp->lock, flags); + kp->keys_pressed = kp_data; + kp->pending = 0; + spin_unlock_irqrestore(&kp->lock, flags); +} + +static irqreturn_t tsc2301_kp_irq_handler(int irq, void *dev_id) +{ + struct tsc2301 *tsc = dev_id; + struct tsc2301_kp *kp = tsc->kp; + unsigned long flags; + int r; + + spin_lock_irqsave(&kp->lock, flags); + if (tsc2301_kp_disabled(tsc)) { + spin_unlock_irqrestore(&kp->lock, flags); + return IRQ_HANDLED; + } + kp->pending = 1; + spin_unlock_irqrestore(&kp->lock, flags); + mod_timer(&kp->timer, + jiffies + msecs_to_jiffies(TSC2301_RELEASE_TIMEOUT)); + r = spi_async(tsc->spi, &tsc->kp->read_msg); + if (r) + dev_err(&tsc->spi->dev, "kp: spi_async() failed"); + return IRQ_HANDLED; +} + +static void tsc2301_kp_start_scan(struct tsc2301 *tsc) +{ + tsc2301_write_reg(tsc, TSC2301_REG_KPMASK, tsc->kp->mask); + tsc2301_write_reg(tsc, TSC2301_REG_KEY, TSC2301_DEBOUNCE_TIME); +} + +static void tsc2301_kp_stop_scan(struct tsc2301 *tsc) +{ + tsc2301_write_reg(tsc, TSC2301_REG_KEY, 1 << 14); +} + +/* Must be called with the mutex held */ +static void tsc2301_kp_enable(struct tsc2301 *tsc) +{ + struct tsc2301_kp *kp = tsc->kp; + unsigned long flags; + + spin_lock_irqsave(&kp->lock, flags); + BUG_ON(!tsc2301_kp_disabled(tsc)); + if (--kp->disable_depth != 0) { + spin_unlock_irqrestore(&kp->lock, flags); + return; + } + spin_unlock_irqrestore(&kp->lock, flags); + + irq_set_irq_type(kp->irq, IRQ_TYPE_EDGE_FALLING); + tsc2301_kp_start_scan(tsc); + enable_irq(kp->irq); +} + +/* Must be called with the mutex held */ +static int tsc2301_kp_disable(struct tsc2301 *tsc, int release_keys) +{ + struct tsc2301_kp *kp = tsc->kp; + unsigned long flags; + + spin_lock_irqsave(&kp->lock, flags); + if (kp->disable_depth++ != 0) { + spin_unlock_irqrestore(&kp->lock, flags); + goto out; + } + disable_irq_nosync(kp->irq); + irq_set_irq_type(kp->irq, IRQ_TYPE_NONE); + spin_unlock_irqrestore(&kp->lock, flags); + + while (kp->pending) { + msleep(1); + } + + tsc2301_kp_stop_scan(tsc); +out: + if (!release_keys) + del_timer(&kp->timer); /* let timeout release keys */ + + return 0; +} + +/* The following workaround is needed for a HW bug triggered by the + * following: + * 1. keep any key pressed + * 2. disable keypad + * 3. release all keys + * 4. reenable keypad + * 5. disable touch screen controller + * + * After this the keypad scanner will get stuck in busy state and won't + * report any interrupts for further keypresses. One way to recover is to + * restart the keypad scanner whenever we enable / disable the + * touchscreen controller. + */ +void tsc2301_kp_restart(struct tsc2301 *tsc) +{ + if (!tsc2301_kp_disabled(tsc)) { + tsc2301_kp_start_scan(tsc); + } +} + +static ssize_t tsc2301_kp_disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tsc2301 *tsc = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", tsc2301_kp_disabled(tsc) ? 1 : 0); +} + +static ssize_t tsc2301_kp_disable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct tsc2301 *tsc = dev_get_drvdata(dev); + struct tsc2301_kp *kp = tsc->kp; + char *endp; + int i; + + i = simple_strtoul(buf, &endp, 10); + i = i ? 1 : 0; + + mutex_lock(&kp->mutex); + if (i == kp->user_disabled) { + mutex_unlock(&kp->mutex); + return count; + } + kp->user_disabled = i; + + if (i) + tsc2301_kp_disable(tsc, 1); + else + tsc2301_kp_enable(tsc); + mutex_unlock(&kp->mutex); + + return count; +} + +static DEVICE_ATTR(disable_kp, 0664, tsc2301_kp_disable_show, + tsc2301_kp_disable_store); + +static const u16 tsc2301_kp_read_data = 0x8000 | TSC2301_REG_KPDATA; + +static void tsc2301_kp_setup_spi_xfer(struct tsc2301 *tsc) +{ + struct tsc2301_kp *kp = tsc->kp; + struct spi_message *m = &kp->read_msg; + struct spi_transfer *x = &kp->read_xfer[0]; + + spi_message_init(&kp->read_msg); + + x->tx_buf = &tsc2301_kp_read_data; + x->len = 2; + spi_message_add_tail(x, m); + x++; + + x->rx_buf = &kp->data; + x->len = 2; + spi_message_add_tail(x, m); + + m->complete = tsc2301_kp_rx; + m->context = tsc; +} + +#ifdef CONFIG_PM +int tsc2301_kp_suspend(struct tsc2301 *tsc) +{ + struct tsc2301_kp *kp = tsc->kp; + + mutex_lock(&kp->mutex); + tsc2301_kp_disable(tsc, 1); + mutex_unlock(&kp->mutex); + return 0; +} + +void tsc2301_kp_resume(struct tsc2301 *tsc) +{ + struct tsc2301_kp *kp = tsc->kp; + + mutex_lock(&kp->mutex); + tsc2301_kp_enable(tsc); + mutex_unlock(&kp->mutex); +} +#endif + +int __devinit tsc2301_kp_init(struct tsc2301 *tsc, + struct tsc2301_platform_data *pdata) +{ + struct input_dev *idev; + struct tsc2301_kp *kp; + int r, i; + u16 mask; + + if (pdata->keyb_int < 0) { + dev_err(&tsc->spi->dev, "need kbirq"); + return -EINVAL; + } + + kp = kzalloc(sizeof(*kp), GFP_KERNEL); + if (kp == NULL) + return -ENOMEM; + tsc->kp = kp; + + kp->irq = pdata->keyb_int; + spin_lock_init(&kp->lock); + mutex_init(&kp->mutex); + + init_timer(&kp->timer); + kp->timer.data = (unsigned long) tsc; + kp->timer.function = tsc2301_kp_timer; + + idev = input_allocate_device(); + if (idev == NULL) { + r = -ENOMEM; + goto err1; + } + if (pdata->keyb_name) + idev->name = pdata->keyb_name; + else + idev->name = "TSC2301 keypad"; + snprintf(kp->phys, sizeof(kp->phys), "%s/input-kp", dev_name(&tsc->spi->dev)); + idev->phys = kp->phys; + + mask = 0; + idev->evbit[0] = BIT(EV_KEY); + for (i = 0; i < 16; i++) { + if (pdata->keymap[i] > 0) { + set_bit(pdata->keymap[i], idev->keybit); + kp->keymap[i] = pdata->keymap[i]; + } else { + kp->keymap[i] = -1; + mask |= 1 << i; + } + } + + if (pdata->kp_rep) + set_bit(EV_REP, idev->evbit); + + kp->idev = idev; + + tsc2301_kp_setup_spi_xfer(tsc); + + r = device_create_file(&tsc->spi->dev, &dev_attr_disable_kp); + if (r < 0) + goto err2; + + tsc2301_kp_start_scan(tsc); + + /* IRQ mode 0 is faulty, it can cause the KBIRQ to get stuck. + * Mode 2 deasserts the IRQ at: + * - HW or SW reset + * - Setting SCS flag in REG_KEY register + * - Releasing all keys + * - Reading the REG_KPDATA + */ + tsc2301_write_kbc(tsc, 2); + + tsc2301_write_reg(tsc, TSC2301_REG_KPMASK, mask); + kp->mask = mask; + + irq_set_irq_type(kp->irq, IRQ_TYPE_EDGE_FALLING); + + r = request_irq(kp->irq, tsc2301_kp_irq_handler, IRQF_SAMPLE_RANDOM, + "tsc2301-kp", tsc); + if (r < 0) { + dev_err(&tsc->spi->dev, "unable to get kbirq IRQ"); + goto err3; + } + irq_set_irq_wake(kp->irq, 1); + + /* We need to read the register once..? */ + tsc2301_read_reg(tsc, TSC2301_REG_KPDATA); + + r = input_register_device(idev); + if (r < 0) { + dev_err(&tsc->spi->dev, "can't register keypad device\n"); + goto err4; + } + + return 0; + +err4: + free_irq(kp->irq, tsc); +err3: + tsc2301_kp_stop_scan(tsc); + device_remove_file(&tsc->spi->dev, &dev_attr_disable_kp); +err2: + input_free_device(kp->idev); +err1: + kfree(kp); + return r; +} + +void __devexit tsc2301_kp_exit(struct tsc2301 *tsc) +{ + struct tsc2301_kp *kp = tsc->kp; + + tsc2301_kp_disable(tsc, 1); + input_unregister_device(kp->idev); + free_irq(kp->irq, tsc); + device_remove_file(&tsc->spi->dev, &dev_attr_disable_kp); + + kfree(kp); +} Index: linux-3.1/drivers/input/touchscreen/Kconfig =================================================================== --- linux-3.1.orig/drivers/input/touchscreen/Kconfig 2011-10-30 00:48:29.341056972 +0200 +++ linux-3.1/drivers/input/touchscreen/Kconfig 2011-10-30 00:48:48.989043470 +0200 @@ -673,6 +673,12 @@ config TOUCHSCREEN_TSC2007 To compile this driver as a module, choose M here: the module will be called tsc2007. +config TOUCHSCREEN_TSC2301 + tristate "TSC2301 touchscreen support" + depends on SPI_TSC2301 + help + Say Y here for if you are using the touchscreen features of TSC2301. + config TOUCHSCREEN_W90X900 tristate "W90P910 touchscreen driver" depends on HAVE_CLK Index: linux-3.1/drivers/input/touchscreen/Makefile =================================================================== --- linux-3.1.orig/drivers/input/touchscreen/Makefile 2011-10-30 00:48:29.349056969 +0200 +++ linux-3.1/drivers/input/touchscreen/Makefile 2011-10-30 00:48:48.989043470 +0200 @@ -48,6 +48,7 @@ obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o +obj-$(CONFIG_TOUCHSCREEN_TSC2301) += tsc2301_ts.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o obj-$(CONFIG_TOUCHSCREEN_WM831X) += wm831x-ts.o Index: linux-3.1/drivers/input/touchscreen/tsc2301_ts.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-3.1/drivers/input/touchscreen/tsc2301_ts.c 2011-10-30 00:48:48.989043470 +0200 @@ -0,0 +1,676 @@ +/* + * TSC2301 touchscreen driver + * + * Copyright (C) 2005-2008 Nokia Corporation + * + * Written by Jarkko Oikarinen, Imre Deak and Juha Yrjola + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +#include + +/** + * The touchscreen interface operates as follows: + * + * Initialize: + * Request access to GPIO103 (DAV) + * tsc2301_ts_irq_handler will trigger when DAV line goes down + * + * 1) Pen is pressed against touchscreeen + * 2) TSC2301 performs AD conversion + * 3) After the conversion is done TSC2301 drives DAV line down + * 4) GPIO IRQ is received and tsc2301_ts_irq_handler is called + * 5) tsc2301_ts_irq_handler queues up an spi transfer to fetch + * the x, y, z1, z2 values + * 6) SPI framework calls tsc2301_ts_rx after the coordinates are read + * 7) When the penup_timer expires, there have not been DAV interrupts + * during the last 20ms which means the pen has been lifted. + */ + + +#define TSC2301_TOUCHSCREEN_PRODUCT_ID 0x0052 +#define TSC2301_TOUCHSCREEN_PRODUCT_VERSION 0x0001 + +#define TSC2301_TS_PENUP_TIME 20 + +#define TSC2301_ADCREG_CONVERSION_CTRL_BY_TSC2301 0x8000 +#define TSC2301_ADCREG_CONVERSION_CTRL_BY_HOST 0x0000 + +#define TSC2301_ADCREG_FUNCTION_NONE 0x0000 +#define TSC2301_ADCREG_FUNCTION_XY 0x0400 +#define TSC2301_ADCREG_FUNCTION_XYZ 0x0800 +#define TSC2301_ADCREG_FUNCTION_X 0x0C00 +#define TSC2301_ADCREG_FUNCTION_Y 0x1000 +#define TSC2301_ADCREG_FUNCTION_Z 0x1400 +#define TSC2301_ADCREG_FUNCTION_DAT1 0x1800 +#define TSC2301_ADCREG_FUNCTION_DAT2 0x1C00 +#define TSC2301_ADCREG_FUNCTION_AUX1 0x2000 +#define TSC2301_ADCREG_FUNCTION_AUX2 0x2400 +#define TSC2301_ADCREG_FUNCTION_TEMP 0x2800 + +#define TSC2301_ADCREG_RESOLUTION_8BIT 0x0100 +#define TSC2301_ADCREG_RESOLUTION_10BIT 0x0200 +#define TSC2301_ADCREG_RESOLUTION_12BIT 0x0300 + +#define TSC2301_ADCREG_AVERAGING_NONE 0x0000 +#define TSC2301_ADCREG_AVERAGING_4AVG 0x0040 +#define TSC2301_ADCREG_AVERAGING_8AVG 0x0080 +#define TSC2301_ADCREG_AVERAGING_16AVG 0x00C0 + +#define TSC2301_ADCREG_CLOCK_8MHZ 0x0000 +#define TSC2301_ADCREG_CLOCK_4MHZ 0x0010 +#define TSC2301_ADCREG_CLOCK_2MHZ 0x0020 +#define TSC2301_ADCREG_CLOCK_1MHZ 0x0030 + +#define TSC2301_ADCREG_VOLTAGE_STAB_0US 0x0000 +#define TSC2301_ADCREG_VOLTAGE_STAB_100US 0x0002 +#define TSC2301_ADCREG_VOLTAGE_STAB_500US 0x0004 +#define TSC2301_ADCREG_VOLTAGE_STAB_1MS 0x0006 +#define TSC2301_ADCREG_VOLTAGE_STAB_5MS 0x0008 +#define TSC2301_ADCREG_VOLTAGE_STAB_10MS 0x000A +#define TSC2301_ADCREG_VOLTAGE_STAB_50MS 0x000C +#define TSC2301_ADCREG_VOLTAGE_STAB_100MS 0x000E + +#define TSC2301_ADCREG_STOP_CONVERSION 0x4000 + +#define MAX_12BIT ((1 << 12) - 1) + +#define TS_RECT_SIZE 8 +#define TSF_MIN_Z1 100 +#define TSF_MAX_Z2 4000 + +#define TSF_SAMPLES 4 + +struct ts_filter { + int sample_cnt; + + int avg_x; + int avg_y; + int avg_z1; + int avg_z2; +}; + +struct ts_coords { + u16 x; + u16 y; + u16 z1; + u16 z2; +}; + +struct tsc2301_ts { + struct input_dev *idev; + char phys[32]; + struct timer_list penup_timer; + struct mutex mutex; + + struct spi_transfer read_xfer[2]; + struct spi_message read_msg; + struct ts_coords *coords; + + struct ts_filter filter; + + int hw_avg_max; + u16 x; + u16 y; + u16 p; + + u16 x_plate_ohm; + int stab_time; + int max_pressure; + int touch_pressure; + + u8 event_sent; + u8 pen_down; + u8 disabled; + u8 disable_depth; + + int hw_flags; + int irq; +}; + + +static const u16 tsc2301_ts_read_data = 0x8000 | TSC2301_REG_X; + +static int tsc2301_ts_check_config(struct tsc2301_ts *ts, int *hw_flags) +{ + int flags; + + flags = 0; + switch (ts->hw_avg_max) { + case 0: + flags |= TSC2301_ADCREG_AVERAGING_NONE; + break; + case 4: + flags |= TSC2301_ADCREG_AVERAGING_4AVG; + break; + case 8: + flags |= TSC2301_ADCREG_AVERAGING_8AVG; + break; + case 16: + flags |= TSC2301_ADCREG_AVERAGING_16AVG; + break; + default: + return -EINVAL; + } + + switch (ts->stab_time) { + case 0: + flags |= TSC2301_ADCREG_VOLTAGE_STAB_0US; + break; + case 100: + flags |= TSC2301_ADCREG_VOLTAGE_STAB_100US; + break; + case 500: + flags |= TSC2301_ADCREG_VOLTAGE_STAB_500US; + break; + case 1000: + flags |= TSC2301_ADCREG_VOLTAGE_STAB_1MS; + break; + case 5000: + flags |= TSC2301_ADCREG_VOLTAGE_STAB_5MS; + break; + case 10000: + flags |= TSC2301_ADCREG_VOLTAGE_STAB_10MS; + break; + case 50000: + flags |= TSC2301_ADCREG_VOLTAGE_STAB_50MS; + break; + case 100000: + flags |= TSC2301_ADCREG_VOLTAGE_STAB_100MS; + break; + default: + return -EINVAL; + } + + *hw_flags = flags; + return 0; +} + +/* + * This odd three-time initialization is to work around a bug in TSC2301. + * See TSC2301 errata for details. + */ +static int tsc2301_ts_configure(struct tsc2301 *tsc, int flags) +{ + struct spi_transfer xfer[5]; + struct spi_transfer *x; + struct spi_message m; + int i; + u16 val1, val2, val3; + u16 data[10]; + + val1 = TSC2301_ADCREG_CONVERSION_CTRL_BY_HOST | + TSC2301_ADCREG_STOP_CONVERSION | + TSC2301_ADCREG_FUNCTION_NONE | + TSC2301_ADCREG_RESOLUTION_12BIT | + TSC2301_ADCREG_AVERAGING_NONE | + TSC2301_ADCREG_CLOCK_2MHZ | + TSC2301_ADCREG_VOLTAGE_STAB_100MS; + + val2 = TSC2301_ADCREG_CONVERSION_CTRL_BY_HOST | + TSC2301_ADCREG_FUNCTION_XYZ | + TSC2301_ADCREG_RESOLUTION_12BIT | + TSC2301_ADCREG_AVERAGING_16AVG | + TSC2301_ADCREG_CLOCK_1MHZ | + TSC2301_ADCREG_VOLTAGE_STAB_100MS; + + /* Averaging and voltage stabilization settings in flags */ + val3 = TSC2301_ADCREG_CONVERSION_CTRL_BY_TSC2301 | + TSC2301_ADCREG_FUNCTION_XYZ | + TSC2301_ADCREG_RESOLUTION_12BIT | + TSC2301_ADCREG_CLOCK_2MHZ | + flags; + + /* Now we prepare the command for transferring */ + data[0] = TSC2301_REG_ADC; + data[1] = val1; + data[2] = TSC2301_REG_ADC; + data[3] = val2; + data[4] = TSC2301_REG_ADC; + data[5] = val3; + data[6] = TSC2301_REG_REF; + data[7] = 1 << 4 | 1 << 2 | 1; /* intref, 100uS settl, 2.5V ref */ + data[8] = TSC2301_REG_CONFIG; + data[9] = 3 << 3 | 2 << 0; /* 340uS pre-chrg, 544us delay */ + + spi_message_init(&m); + m.spi = tsc->spi; + + memset(xfer, 0, sizeof(xfer)); + x = &xfer[0]; + + for (i = 0; i < 10; i += 2) { + x->tx_buf = &data[i]; + x->len = 4; + if (i != 8) + x->cs_change = 1; + spi_message_add_tail(x, &m); + x++; + } + spi_sync(m.spi, &m); + + return 0; +} + +static void tsc2301_ts_start_scan(struct tsc2301 *tsc) +{ + tsc2301_ts_configure(tsc, tsc->ts->hw_flags); + tsc2301_kp_restart(tsc); +} + +static void tsc2301_ts_stop_scan(struct tsc2301 *tsc) +{ + tsc2301_write_reg(tsc, TSC2301_REG_ADC, TSC2301_ADCREG_STOP_CONVERSION); + tsc2301_kp_restart(tsc); +} + +static void update_pen_state(struct tsc2301_ts *ts, int x, int y, int pressure) +{ + if (pressure) { + input_report_abs(ts->idev, ABS_X, x); + input_report_abs(ts->idev, ABS_Y, y); + input_report_abs(ts->idev, ABS_PRESSURE, pressure); + if (!ts->pen_down) + input_report_key(ts->idev, BTN_TOUCH, 1); + ts->pen_down = 1; + } else { + input_report_abs(ts->idev, ABS_PRESSURE, 0); + if (ts->pen_down) + input_report_key(ts->idev, BTN_TOUCH, 0); + ts->pen_down = 0; + } + + input_sync(ts->idev); + +#ifdef VERBOSE + dev_dbg(&tsc->spi->dev, "x %4d y %4d p %4d\n", x, y, pressure); +#endif +} + +static int filter(struct tsc2301_ts *ts, int x, int y, int z1, int z2) +{ + int inside_rect, pressure_limit, Rt; + struct ts_filter *tsf = &ts->filter; + + /* validate pressure and position */ + if (x > MAX_12BIT || y > MAX_12BIT) + return 0; + + /* skip coords if the pressure-components are out of range */ + if (z1 < TSF_MIN_Z1 || z2 > TSF_MAX_Z2) + return 0; + + /* Use the x,y,z1,z2 directly on the first "pen down" event */ + if (ts->event_sent) { + tsf->avg_x += x; + tsf->avg_y += y; + tsf->avg_z1 += z1; + tsf->avg_z2 += z2; + + if (++tsf->sample_cnt < TSF_SAMPLES) + return 0; + x = tsf->avg_x / TSF_SAMPLES; + y = tsf->avg_y / TSF_SAMPLES; + z1 = tsf->avg_z1 / TSF_SAMPLES; + z2 = tsf->avg_z2 / TSF_SAMPLES; + } + tsf->sample_cnt = 0; + tsf->avg_x = 0; + tsf->avg_y = 0; + tsf->avg_z1 = 0; + tsf->avg_z2 = 0; + + pressure_limit = ts->event_sent? ts->max_pressure: ts->touch_pressure; + + /* z1 is always at least 100: */ + Rt = x * (z2 - z1) / z1; + Rt = Rt * ts->x_plate_ohm / 4096; + if (Rt > pressure_limit) + return 0; + + /* discard the event if it still is within the previous rect - unless + * if the pressure is harder, but then use previous x,y position */ + inside_rect = ( + x > (int)ts->x - TS_RECT_SIZE && x < (int)ts->x + TS_RECT_SIZE && + y > (int)ts->y - TS_RECT_SIZE && y < (int)ts->y + TS_RECT_SIZE); + + if (!ts->event_sent || !inside_rect) { + ts->x = x; + ts->y = y; + ts->p = Rt; + return 1; + } else if (Rt < ts->p) { + ts->p = Rt; + return 1; + } + return 0; +} + +/* + * This procedure is called by the SPI framework after the coordinates + * have been read from TSC2301 + */ +static void tsc2301_ts_rx(void *arg) +{ + struct tsc2301 *tsc = arg; + struct tsc2301_ts *ts = tsc->ts; + int send_event; + int x, y, z1, z2; + + x = ts->coords->x; + y = ts->coords->y; + z1 = ts->coords->z1; + z2 = ts->coords->z2; + + send_event = filter(ts, x, y, z1, z2); + if (send_event) { + update_pen_state(ts, ts->x, ts->y, ts->p); + ts->event_sent = 1; + } + + mod_timer(&ts->penup_timer, + jiffies + msecs_to_jiffies(TSC2301_TS_PENUP_TIME)); +} + +/* + * Timer is called TSC2301_TS_PENUP_TIME after pen is up + */ +static void tsc2301_ts_timer_handler(unsigned long data) +{ + struct tsc2301 *tsc = (struct tsc2301 *)data; + struct tsc2301_ts *ts = tsc->ts; + + if (ts->event_sent) { + ts->event_sent = 0; + update_pen_state(ts, 0, 0, 0); + } +} + +/* + * This interrupt is called when pen is down and coordinates are + * available. That is indicated by a falling edge on DEV line. + */ +static irqreturn_t tsc2301_ts_irq_handler(int irq, void *dev_id) +{ + struct tsc2301 *tsc = dev_id; + struct tsc2301_ts *ts = tsc->ts; + int r; + + r = spi_async(tsc->spi, &ts->read_msg); + if (r) + dev_err(&tsc->spi->dev, "ts: spi_async() failed"); + + mod_timer(&ts->penup_timer, + jiffies + msecs_to_jiffies(TSC2301_TS_PENUP_TIME)); + + return IRQ_HANDLED; +} + +static void tsc2301_ts_disable(struct tsc2301 *tsc) +{ + struct tsc2301_ts *ts = tsc->ts; + + if (ts->disable_depth++ != 0) + return; + + disable_irq(ts->irq); + + /* wait until penup timer expire normally */ + do { + msleep(1); + } while (ts->event_sent); + + tsc2301_ts_stop_scan(tsc); +} + +static void tsc2301_ts_enable(struct tsc2301 *tsc) +{ + struct tsc2301_ts *ts = tsc->ts; + + if (--ts->disable_depth != 0) + return; + + enable_irq(ts->irq); + + tsc2301_ts_start_scan(tsc); +} + +#ifdef CONFIG_PM +int tsc2301_ts_suspend(struct tsc2301 *tsc) +{ + struct tsc2301_ts *ts = tsc->ts; + + mutex_lock(&ts->mutex); + tsc2301_ts_disable(tsc); + mutex_unlock(&ts->mutex); + + return 0; +} + +void tsc2301_ts_resume(struct tsc2301 *tsc) +{ + struct tsc2301_ts *ts = tsc->ts; + + mutex_lock(&ts->mutex); + tsc2301_ts_enable(tsc); + mutex_unlock(&ts->mutex); +} +#endif + +static void tsc2301_ts_setup_spi_xfer(struct tsc2301 *tsc) +{ + struct tsc2301_ts *ts = tsc->ts; + struct spi_message *m = &ts->read_msg; + struct spi_transfer *x = &ts->read_xfer[0]; + + spi_message_init(m); + + x->tx_buf = &tsc2301_ts_read_data; + x->len = 2; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = ts->coords; + x->len = 8; + spi_message_add_tail(x, m); + + m->complete = tsc2301_ts_rx; + m->context = tsc; +} + +static ssize_t tsc2301_ts_pen_down_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct tsc2301 *tsc = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", tsc->ts->pen_down); +} + +static DEVICE_ATTR(pen_down, S_IRUGO, tsc2301_ts_pen_down_show, NULL); + +static ssize_t tsc2301_ts_disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tsc2301 *tsc = dev_get_drvdata(dev); + struct tsc2301_ts *ts = tsc->ts; + + return sprintf(buf, "%u\n", ts->disabled); +} + +static ssize_t tsc2301_ts_disable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct tsc2301 *tsc = dev_get_drvdata(dev); + struct tsc2301_ts *ts = tsc->ts; + char *endp; + int i; + + i = simple_strtoul(buf, &endp, 10); + i = i ? 1 : 0; + mutex_lock(&ts->mutex); + if (i == ts->disabled) goto out; + ts->disabled = i; + + if (i) + tsc2301_ts_disable(tsc); + else + tsc2301_ts_enable(tsc); +out: + mutex_unlock(&ts->mutex); + return count; +} + +static DEVICE_ATTR(disable_ts, 0664, tsc2301_ts_disable_show, + tsc2301_ts_disable_store); + +int __devinit tsc2301_ts_init(struct tsc2301 *tsc, + struct tsc2301_platform_data *pdata) +{ + struct tsc2301_ts *ts; + struct input_dev *idev; + int r; + int x_max, y_max; + int x_fudge, y_fudge, p_fudge; + + if (pdata->dav_int <= 0) { + dev_err(&tsc->spi->dev, "need DAV IRQ"); + return -EINVAL; + } + + ts = kzalloc(sizeof(*ts), GFP_KERNEL); + if (ts == NULL) + return -ENOMEM; + tsc->ts = ts; + + ts->coords = kzalloc(sizeof(*ts->coords), GFP_KERNEL); + if (ts->coords == NULL) { + kfree(ts); + return -ENOMEM; + } + + ts->irq = pdata->dav_int; + + init_timer(&ts->penup_timer); + setup_timer(&ts->penup_timer, tsc2301_ts_timer_handler, + (unsigned long)tsc); + + mutex_init(&ts->mutex); + + ts->x_plate_ohm = pdata->ts_x_plate_ohm ? : 280; + ts->hw_avg_max = pdata->ts_hw_avg; + ts->max_pressure = pdata->ts_max_pressure ? : MAX_12BIT; + ts->touch_pressure = pdata->ts_touch_pressure ? : ts->max_pressure; + ts->stab_time = pdata->ts_stab_time; + + x_max = pdata->ts_x_max ? : 4096; + y_max = pdata->ts_y_max ? : 4096; + x_fudge = pdata->ts_x_fudge ? : 4; + y_fudge = pdata->ts_y_fudge ? : 8; + p_fudge = pdata->ts_pressure_fudge ? : 2; + + if ((r = tsc2301_ts_check_config(ts, &ts->hw_flags))) { + dev_err(&tsc->spi->dev, "invalid configuration\n"); + goto err2; + } + + idev = input_allocate_device(); + if (idev == NULL) { + r = -ENOMEM; + goto err2; + } + idev->name = "TSC2301 touchscreen"; + snprintf(ts->phys, sizeof(ts->phys), + "%s/input-ts", dev_name(&tsc->spi->dev)); + idev->phys = ts->phys; + idev->dev.parent = &tsc->spi->dev; + + idev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY); + idev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); + ts->idev = idev; + + tsc2301_ts_setup_spi_xfer(tsc); + + /* These parameters should perhaps be configurable? */ + input_set_abs_params(idev, ABS_X, 0, x_max, x_fudge, 0); + input_set_abs_params(idev, ABS_Y, 0, y_max, y_fudge, 0); + input_set_abs_params(idev, ABS_PRESSURE, 0, ts->max_pressure, + p_fudge, 0); + + tsc2301_ts_start_scan(tsc); + + r = request_irq(ts->irq, tsc2301_ts_irq_handler, + IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_FALLING, + "tsc2301-ts", tsc); + if (r < 0) { + dev_err(&tsc->spi->dev, "unable to get DAV IRQ"); + goto err3; + } + irq_set_irq_wake(ts->irq, 1); + + if (device_create_file(&tsc->spi->dev, &dev_attr_pen_down) < 0) + goto err4; + if (device_create_file(&tsc->spi->dev, &dev_attr_disable_ts) < 0) + goto err5; + + r = input_register_device(idev); + if (r < 0) { + dev_err(&tsc->spi->dev, "can't register touchscreen device\n"); + goto err6; + } + + return 0; +err6: + device_remove_file(&tsc->spi->dev, &dev_attr_disable_ts); +err5: + device_remove_file(&tsc->spi->dev, &dev_attr_pen_down); +err4: + free_irq(ts->irq, tsc); +err3: + tsc2301_ts_stop_scan(tsc); + input_free_device(idev); +err2: + kfree(ts->coords); + kfree(ts); + return r; +} + +void __devexit tsc2301_ts_exit(struct tsc2301 *tsc) +{ + struct tsc2301_ts *ts = tsc->ts; + + tsc2301_ts_disable(tsc); + + device_remove_file(&tsc->spi->dev, &dev_attr_disable_ts); + device_remove_file(&tsc->spi->dev, &dev_attr_pen_down); + + free_irq(ts->irq, tsc); + input_unregister_device(ts->idev); + + kfree(ts->coords); + kfree(ts); +} +MODULE_AUTHOR("Jarkko Oikarinen "); +MODULE_LICENSE("GPL"); Index: linux-3.1/drivers/spi/Kconfig =================================================================== --- linux-3.1.orig/drivers/spi/Kconfig 2011-10-30 00:48:29.373056952 +0200 +++ linux-3.1/drivers/spi/Kconfig 2011-10-30 00:48:48.989043470 +0200 @@ -435,6 +435,28 @@ config SPI_TLE62X0 sysfs interface, with each line presented as a kind of GPIO exposing both switch control and diagnostic feedback. +config SPI_TSC2301 + tristate "TSC2301 driver" + depends on SPI_MASTER + help + Say Y here if you have a TSC2301 chip connected to an SPI + bus on your board. + + The TSC2301 is a highly integrated PDA analog interface circuit. + It contains a complete 12-bit A/D resistive touch screen + converter (ADC) including drivers, touch pressure measurement + capability, keypad controller, and 8-bit D/A converter (DAC) output + for LCD contrast control. + + To compile this driver as a module, choose M here: the + module will be called tsc2301. + +config SPI_TSC2301_AUDIO + boolean "TSC2301 audio support" + depends on SPI_TSC2301 && SND + help + Say Y here for if you are using the audio features of TSC2301. + # # Add new SPI protocol masters in alphabetical order above this line # Index: linux-3.1/drivers/spi/Makefile =================================================================== --- linux-3.1.orig/drivers/spi/Makefile 2011-10-30 00:48:29.385056944 +0200 +++ linux-3.1/drivers/spi/Makefile 2011-10-30 00:48:48.989043470 +0200 @@ -59,4 +59,6 @@ obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o obj-$(CONFIG_SPI_TXX9) += spi-txx9.o obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o - +obj-$(CONFIG_SPI_TSC2301) += tsc2301.o +tsc2301-objs := tsc2301-core.o +tsc2301-$(CONFIG_SPI_TSC2301_AUDIO) += tsc2301-mixer.o Index: linux-3.1/drivers/spi/tsc2301-core.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-3.1/drivers/spi/tsc2301-core.c 2011-10-30 00:48:48.989043470 +0200 @@ -0,0 +1,297 @@ +/* + * TSC2301 driver + * + * Copyright (C) 2005, 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +u16 tsc2301_read_reg(struct tsc2301 *tsc, int reg) +{ + struct spi_transfer t[2]; + struct spi_message m; + u16 data = 0, cmd; + + cmd = reg; + cmd |= 0x8000; + + memset(t, 0, sizeof(t)); + spi_message_init(&m); + m.spi = tsc->spi; + + t[0].tx_buf = &cmd; + t[0].rx_buf = NULL; + t[0].len = 2; + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = NULL; + t[1].rx_buf = &data; + t[1].len = 2; + spi_message_add_tail(&t[1], &m); + + spi_sync(m.spi, &m); + + return data; +} + +void tsc2301_write_reg(struct tsc2301 *tsc, int reg, u16 val) +{ + struct spi_transfer t; + struct spi_message m; + u16 data[2]; + + /* Now we prepare the command for transferring */ + data[0] = reg; + data[1] = val; + + spi_message_init(&m); + m.spi = tsc->spi; + + memset(&t, 0, sizeof(t)); + t.tx_buf = data; + t.rx_buf = NULL; + t.len = 4; + spi_message_add_tail(&t, &m); + + spi_sync(m.spi, &m); +} + +void tsc2301_write_kbc(struct tsc2301 *tsc, int val) +{ + u16 w; + + w = tsc->config2_shadow; + w &= ~(0x03 << 14); + w |= (val & 0x03) << 14; + tsc2301_write_reg(tsc, TSC2301_REG_CONFIG2, w); + tsc->config2_shadow = w; +} + +void tsc2301_write_pll(struct tsc2301 *tsc, + int pll_n, int pll_a, int pll_pdc, int pct_e, int pll_o) +{ + u16 w; + + w = tsc->config2_shadow; + w &= ~0x3fff; + w |= (pll_n & 0x0f) | ((pll_a & 0x0f) << 4) | ((pll_pdc & 0x0f) << 8); + w |= pct_e ? (1 << 12) : 0; + w |= pll_o ? (1 << 13) : 0; + tsc2301_write_reg(tsc, TSC2301_REG_CONFIG2, w); + tsc->config2_shadow = w; +} + +void tsc2301_read_buf(struct tsc2301 *tsc, int reg, u16 *rx_buf, int len) +{ + struct spi_transfer t[2]; + struct spi_message m; + u16 cmd, i; + + cmd = reg; + cmd |= 0x8000; + + spi_message_init(&m); + m.spi = tsc->spi; + + memset(t, 0, sizeof(t)); + t[0].tx_buf = &cmd; + t[0].rx_buf = NULL; + t[0].len = 2; + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = NULL; + t[1].rx_buf = rx_buf; + t[1].len = 2 * len; + spi_message_add_tail(&t[1], &m); + + spi_sync(m.spi, &m); + + for (i = 0; i < len; i++) + printk(KERN_DEBUG "rx_buf[%d]: %04x\n", i, rx_buf[i]); +} + +static int __devinit tsc2301_probe(struct spi_device *spi) +{ + struct tsc2301 *tsc; + struct tsc2301_platform_data *pdata = spi->dev.platform_data; + int r; + u16 w; + + if (!pdata) { + dev_dbg(&spi->dev, "no platform data?\n"); + return -ENODEV; + } + + tsc = kzalloc(sizeof(*tsc), GFP_KERNEL); + if (tsc == NULL) + return -ENOMEM; + + dev_set_drvdata(&spi->dev, tsc); + tsc->spi = spi; + + tsc->enable_clock = pdata->enable_clock; + tsc->disable_clock = pdata->disable_clock; + + if (pdata->reset_gpio >= 0) { + tsc->reset_gpio = pdata->reset_gpio; + r = gpio_request(tsc->reset_gpio, "TSC2301 reset"); + if (r < 0) + goto err1; + gpio_direction_output(tsc->reset_gpio, 1); + mdelay(1); + gpio_set_value(tsc->reset_gpio, 0); + } else + tsc->reset_gpio = -1; + + spi->mode = SPI_MODE_1; + spi->bits_per_word = 16; + /* The max speed might've been defined by the board-specific + * struct */ + if (!spi->max_speed_hz) + spi->max_speed_hz = TSC2301_HZ; + spi_setup(spi); + + /* Soft reset */ + tsc2301_write_reg(tsc, TSC2301_REG_RESET, 0xbb00); + msleep(1); + + w = tsc2301_read_reg(tsc, TSC2301_REG_ADC); + if (!(w & (1 << 14))) { + dev_err(&spi->dev, "invalid ADC reg value: %04x\n", w); + r = -ENODEV; + goto err1; + } + + w = tsc2301_read_reg(tsc, TSC2301_REG_DAC); + if (!(w & (1 << 15))) { + dev_err(&spi->dev, "invalid DAC reg value: %04x\n", w); + r = -ENODEV; + goto err1; + } + + /* Stop keypad scanning */ + tsc2301_write_reg(tsc, TSC2301_REG_KEY, 0x4000); + + /* We have to cache this for read-modify-write, since we can't + * read back BIT15 */ + w = tsc2301_read_reg(tsc, TSC2301_REG_CONFIG2); + /* By default BIT15 is set */ + w |= 1 << 15; + tsc->config2_shadow = w; + + r = tsc2301_kp_init(tsc, pdata); + if (r) + goto err1; + r = tsc2301_ts_init(tsc, pdata); + if (r) + goto err2; + r = tsc2301_mixer_init(tsc, pdata); + if (r) + goto err3; + return 0; + +err3: + tsc2301_ts_exit(tsc); +err2: + tsc2301_kp_exit(tsc); +err1: + kfree(tsc); + return r; +} + +static int __devexit tsc2301_remove(struct spi_device *spi) +{ + struct tsc2301 *tsc = dev_get_drvdata(&spi->dev); + + tsc2301_mixer_exit(tsc); + tsc2301_ts_exit(tsc); + tsc2301_kp_exit(tsc); + if (tsc->reset_gpio >= 0) + gpio_free(tsc->reset_gpio); + kfree(tsc); + + return 0; +} + +#ifdef CONFIG_PM +static int tsc2301_suspend(struct spi_device *spi, pm_message_t mesg) +{ + struct tsc2301 *tsc = dev_get_drvdata(&spi->dev); + int r; + + if ((r = tsc2301_mixer_suspend(tsc)) < 0) + return r; + if ((r = tsc2301_kp_suspend(tsc)) < 0) + goto err1; + if ((r = tsc2301_ts_suspend(tsc)) < 0) + goto err2; + + return 0; +err2: + tsc2301_kp_resume(tsc); +err1: + tsc2301_mixer_resume(tsc); + return r; +} + +static int tsc2301_resume(struct spi_device *spi) +{ + struct tsc2301 *tsc = dev_get_drvdata(&spi->dev); + + tsc2301_ts_resume(tsc); + tsc2301_kp_resume(tsc); + tsc2301_mixer_resume(tsc); + return 0; +} +#endif + +static struct spi_driver tsc2301_driver = { + .driver = { + .name = "tsc2301", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, +#ifdef CONFIG_PM + .suspend = tsc2301_suspend, + .resume = tsc2301_resume, +#endif + .probe = tsc2301_probe, + .remove = __devexit_p(tsc2301_remove), +}; + +static int __init tsc2301_init(void) +{ + printk("TSC2301 driver initializing\n"); + + return spi_register_driver(&tsc2301_driver); +} +module_init(tsc2301_init); + +static void __exit tsc2301_exit(void) +{ + spi_unregister_driver(&tsc2301_driver); +} +module_exit(tsc2301_exit); + +MODULE_AUTHOR("Juha Yrjölä "); +MODULE_LICENSE("GPL"); Index: linux-3.1/drivers/spi/tsc2301-mixer.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-3.1/drivers/spi/tsc2301-mixer.c 2011-10-30 00:48:48.989043470 +0200 @@ -0,0 +1,1003 @@ +/* + * ALSA Mixer implementation for TSC2301 + * + * Copyright (C) 2006 Nokia Corporation. + * + * Contact: Jarkko Nikula + * Juha Yrjola + * + * Some notes about TSC2301: + * - PLL will stop when DAC and ADC's are powered down. + * - Touchscreen will stop working when audio part is powered up and if audio + * MCLK is stopped. Problem is avoided if audio is powered down before + * stopping MCLK. + * - Audio DAC or audio outputs will activate only after 100 msec from the + * chip power-up. Reason seems to be VCM since there is no this delay if the + * chip and VCM (bit AVPD on PD/MISC) were not powered down. The chip will + * consume about 1 mA if all other audio blocks are powered down except the + * chip itself and VCM. Full power down consumes only about few uA. + * - Power-down transition could happen earliest about 100 msec after the chip + * power-up. Otherwise power-down will fail if there is no that 100 msec + * on time before it. It's not obvious why is that since chip reports + * power-up to be completed and also PLL output on GPIO_0 is active in few + * milliseconds. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* shadow register indexes */ +enum { + /* audio control and volume registers */ + AUDCNTL_INDEX, + ADCVOL_INDEX, + DACVOL_INDEX, + BPVOL_INDEX, + /* keyclick control register (not needed here) */ + /* audio power control register */ + PD_MISC_INDEX, + /* TSC2301 GPIO control register */ + GPIO_INDEX, + + SHADOW_REG_COUNT, +}; + +/* structure for driver private data */ +struct tsc2301_mixer { + struct tsc2301 *tsc; + struct mutex mutex; + + /* shadow registers holding TSC2301 audio registers. Used to hold + * their states during the sleep and also to reduce communication with + * the chip since get callback functions could get register values + * directly from these shadow registers without needing to read them + * from the chip */ + u16 shadow_regs[SHADOW_REG_COUNT]; + + /* audio controller driver usage of the ADC and DAC */ + unsigned adc_enabled:1, dac_enabled:1; + unsigned pll_output:1; + unsigned mclk_enabled; + + /* latest audio power-up timestamp */ + unsigned long pu_jiffies; + + /* these are used when upper layer(s) are going to power-down TSC2301 + * before 100 msec is passed from power-up */ + struct delayed_work delayed_power_down; + unsigned delayed_pd_active:1; + + int (* platform_init)(struct device *); + void (* platform_cleanup)(struct device *); + + struct tsc2301_mixer_gpio *mixer_gpios; + int n_mixer_gpios; +}; + +#define TSC2301_DAC_DELAY msecs_to_jiffies(100) +#define TSC2301_MIN_PU_PERIOD msecs_to_jiffies(100) + +#define TSC2301_REG_TO_PVAL(reg) \ + (TSC2301_REG_TO_PAGE(reg) << 6 | TSC2301_REG_TO_ADDR(reg)) +#define TSC2301_PVAL_TO_REG(v) \ + (TSC2301_REG((((v) >> 6) & 3),((v) & 0x1f))) + +#define TSC2301_VOLUME_MASK 0x7f +#define TSC2301_MIN_ADCVOL 6 +#define TSC2301_MIN_DACVOL 0 +#define TSC2301_MIN_BPVOL 31 +#define TSC2301_MUTE_LEFT_SHIFT 15 +#define TSC2301_VOL_LEFT_SHIFT 8 +#define TSC2301_MUTE_RIGHT_SHIFT 7 +#define TSC2301_VOL_RIGHT_SHIFT 0 + +#define TSC2301_INM_MASK 3 +#define TSC2301_INML_SHIFT 12 +#define TSC2301_INMR_SHIFT 10 + +#define TSC2301_MICG_MASK 3 +#define TSC2301_MICG_MIN 1 /* values 0 & 1 both mean 0 dB */ +#define TSC2301_MICG_SHIFT 8 + +#define TSC2301_REG_AUDCNTL_MCLK(v) (((v) & 3) << 6) +#define TSC2301_REG_AUDCNTL_I2SFS(v) (((v) & 0xf) << 2) +#define TSC2301_REG_AUDCNTL_I2SFM(v) (((v) & 3) << 0) + +#define TSC2301_SINGLE(xname, xindex, reg, shadow_index, shift, mask, min) \ +{\ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_tsc2301_info_single, \ + .get = snd_tsc2301_get_single, \ + .put = snd_tsc2301_put_single, \ + .private_value = TSC2301_REG_TO_PVAL(reg) | \ + (shadow_index << 8) | (shift << 16) | (mask << 24) | \ + (min << 28) \ +} +#define TSC2301_SINGLE_MINVAL(v) (((v) >> 28) & 15) +#define TSC2301_SINGLE_SHIFT(v) (((v) >> 16) & 15) +#define TSC2301_SINGLE_MASK(v) (((v) >> 24) & 15) + +#define TSC2301_DOUBLE(xname, xindex, reg, shadow_index, ls, rs, mask, min) \ +{\ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_tsc2301_info_double, \ + .get = snd_tsc2301_get_double, \ + .put = snd_tsc2301_put_double, \ + .private_value = TSC2301_REG_TO_PVAL(reg) | \ + (shadow_index << 8) | (min << 11) | \ + (ls << 16) | (rs << 20) | (mask << 24) \ +} +#define TSC2301_DOUBLE_MINVAL(v) (((v) >> 11) & 0x1f) +#define TSC2301_DOUBLE_LEFT_SHIFT(v) (((v) >> 16) & 15) +#define TSC2301_DOUBLE_RIGHT_SHIFT(v) (((v) >> 20) & 15) +#define TSC2301_DOUBLE_MASK(v) (((v) >> 24) & TSC2301_VOLUME_MASK) + +#define TSC2301_MUX(xname, xindex, reg, shadow_index, ls, rs, mask) \ +{\ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_tsc2301_info_mux, \ + .get = snd_tsc2301_get_mux, \ + .put = snd_tsc2301_put_mux, \ + .private_value = TSC2301_REG_TO_PVAL(reg) | \ + (shadow_index << 8) | (ls << 16) | (rs << 20) | (mask << 24) \ +} +#define TSC2301_MUX_LEFT_SHIFT(v) (((v) >> 16) & 15) +#define TSC2301_MUX_RIGHT_SHIFT(v) (((v) >> 20) & 15) +#define TSC2301_MUX_MASK(v) (((v) >> 24) & TSC2301_VOLUME_MASK) + +#define TSC2301_BOOL(xname, xindex, reg, shadow_index, shift, invert, state) \ +{ \ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .index = xindex, \ + .info = snd_tsc2301_info_bool, \ + .get = snd_tsc2301_get_bool, \ + .put = snd_tsc2301_put_bool, \ + .private_value = TSC2301_REG_TO_PVAL(reg) | \ + (shadow_index << 8) | (shift << 16) | \ + (invert << 24) | (state << 25) \ +} +#define TSC2301_BOOL_SHIFT(v) (((v) >> 16) & 7) +#define TSC2301_BOOL_INVERT(v) (((v) >> 24) & 1) +#define TSC2301_BOOL_STATE(v) (((v) >> 25) & 1) + +#define TSC2301_SHADOW_INDEX(v) (((v) >> 8) & 7) + +/* + * Power-down handler for additional GPIO mixer controls. GPIO state of GPIO + * controls whose power-down flag is enabled are set to their false/deactivate + * state + * + * Must be called tsc->mixer->mutex locked + */ +static void tsc2301_gpio_power_down(struct tsc2301 *tsc) +{ + struct tsc2301_mixer *mix = tsc->mixer; + u16 temp; + int i; + + temp = mix->shadow_regs[GPIO_INDEX]; + for (i = 0; i < mix->n_mixer_gpios; i++) { + const struct tsc2301_mixer_gpio *mg; + + mg = mix->mixer_gpios + i; + if (mg->deactivate_on_pd) { + int gpio = mg->gpio; + + temp &= ~(1 << gpio); + temp |= mg->inverted << gpio; + } + } + tsc2301_write_reg(tsc, TSC2301_REG_GPIO, temp); +} + +/* + * Powers down/up audio blocks which are muted or become unused. + * shadow_index >= 0, changes power state of single audio block + * shadow_index < 0, changes power state of all blocks + * + * Must be called tsc->mixer->mutex locked + */ +#define TSC2301_MUTE_MASK \ + ((1 << TSC2301_MUTE_LEFT_SHIFT) | (1 << TSC2301_MUTE_RIGHT_SHIFT)) +static void tsc2301_power_ctrl(struct tsc2301 *tsc, int shadow_index, + int poll_pdsts) +{ + struct tsc2301_mixer *mix = tsc->mixer; + u16 pd_ctrl, pd_ctrl_old, w; + unsigned long timeout; + int power_up = 0; + + if (mix->delayed_pd_active) { + mix->delayed_pd_active = 0; + mix->mclk_enabled--; + cancel_delayed_work(&mix->delayed_power_down); + } + + pd_ctrl = pd_ctrl_old = mix->shadow_regs[PD_MISC_INDEX]; + /* power control helper based on used space mixer selections. See + * actual power control decisions below */ + if (shadow_index < 0 || shadow_index == ADCVOL_INDEX) { + /* ADC left and right power down control */ + if (mix->shadow_regs[ADCVOL_INDEX] & + (1 << TSC2301_MUTE_LEFT_SHIFT)) + /* left ADC muted. Power down the left ADC */ + pd_ctrl |= TSC2301_REG_PD_MISC_ADPDL; + else + pd_ctrl &= ~TSC2301_REG_PD_MISC_ADPDL; + if (mix->shadow_regs[ADCVOL_INDEX] & + (1 << TSC2301_MUTE_LEFT_SHIFT)) + /* right ADC muted. Power down the right ADC */ + pd_ctrl |= TSC2301_REG_PD_MISC_ADPDR; + else + pd_ctrl &= ~TSC2301_REG_PD_MISC_ADPDR; + } + if (shadow_index < 0 || shadow_index == DACVOL_INDEX) { + /* DAC power down control */ + if ((mix->shadow_regs[DACVOL_INDEX] & + TSC2301_MUTE_MASK) == TSC2301_MUTE_MASK) + /* both DACs muted. Power down the DAC */ + pd_ctrl |= TSC2301_REG_PD_MISC_DAPD; + else + pd_ctrl &= ~TSC2301_REG_PD_MISC_DAPD; + } + if (shadow_index < 0 || shadow_index == BPVOL_INDEX) { + /* line bypass power down control */ + if ((mix->shadow_regs[BPVOL_INDEX] & + TSC2301_MUTE_MASK) == TSC2301_MUTE_MASK) + /* both line bypasses muted. Power down the bypass + * path */ + pd_ctrl |= TSC2301_REG_PD_MISC_ABPD; + else + pd_ctrl &= ~TSC2301_REG_PD_MISC_ABPD; + } + if (shadow_index < 0 || shadow_index == AUDCNTL_INDEX) { + /* mic bias power down control */ + if ((mix->shadow_regs[AUDCNTL_INDEX] & + (3 << TSC2301_INML_SHIFT)) && + (mix->shadow_regs[AUDCNTL_INDEX] & + (3 << TSC2301_INMR_SHIFT))) + /* both ADC channels use other than mic input. Power + * down the mic bias output */ + pd_ctrl |= TSC2301_REG_PD_MISC_MIBPD; + else + pd_ctrl &= ~TSC2301_REG_PD_MISC_MIBPD; + } + + /* power control decisions based on codec usage and user space mixer + * selections detected above */ + pd_ctrl &= ~TSC2301_REG_PD_MISC_APD; /* audio not powered down */ + if (mix->mclk_enabled) { + if (!mix->adc_enabled) { + /* ADC not used, power down both ADC's and mic bias + * output independently of user space mixer + * selections */ + pd_ctrl |= TSC2301_REG_PD_MISC_ADPDL; + pd_ctrl |= TSC2301_REG_PD_MISC_ADPDR; + pd_ctrl |= TSC2301_REG_PD_MISC_MIBPD; + } + if (!mix->dac_enabled) { + /* DAC not used, power down DAC independently of user + * space mixer selections */ + pd_ctrl |= TSC2301_REG_PD_MISC_DAPD; + } + + if (mix->pll_output) { + /* GPIO_0 is configured as PLL output so audio + * controller is expecting clock from TSC2301. Either + * ADC or DAC must be active in order to keep PLL on */ + if ((pd_ctrl & TSC2301_REG_PD_MISC_ADPDL) && + (pd_ctrl & TSC2301_REG_PD_MISC_ADPDR) && + (pd_ctrl & TSC2301_REG_PD_MISC_DAPD)) { + /* neither ADC or DAC used. Force ADC on in + * order to keep PLL active */ + pd_ctrl &= ~(TSC2301_REG_PD_MISC_ADPDL | + TSC2301_REG_PD_MISC_ADPDR); + } + } + } else { + /* audio input clock is not enabled so power down DAC and ADC + * in order to shutdown PLL and to keep touchscreen and keypad + * parts working. Touchscreen and keypad use audio clock when + * PLL is on and internal clock otherwise */ + pd_ctrl |= TSC2301_REG_PD_MISC_DAPD | + TSC2301_REG_PD_MISC_ADPDL | + TSC2301_REG_PD_MISC_ADPDR; + } + + if ((pd_ctrl & TSC2301_REG_PD_MISC_ADPDL) && + (pd_ctrl & TSC2301_REG_PD_MISC_ADPDR) && + (pd_ctrl & TSC2301_REG_PD_MISC_DAPD) && + (pd_ctrl & TSC2301_REG_PD_MISC_ABPD)) { + /* all ADC, DAC and line bypass path unused. Power down the + * whole audio part of the TSC2301 */ + pd_ctrl |= TSC2301_REG_PD_MISC_APD; + } + + if (pd_ctrl == pd_ctrl_old) + return; + + /* power down control changed. Update into TSC2301 */ + if ((pd_ctrl ^ pd_ctrl_old) & TSC2301_REG_PD_MISC_APD) { + /* whole audio power state changed. Update GPIO states */ + if (pd_ctrl & TSC2301_REG_PD_MISC_APD) { + /* power down GPIO controls before powering down + * the codec */ + tsc2301_gpio_power_down(tsc); + /* we must really ensure that codec has been on no less + * than 100 msec before doing power-down */ + timeout = mix->pu_jiffies + TSC2301_MIN_PU_PERIOD - + jiffies; + if (timeout <= TSC2301_MIN_PU_PERIOD) { + mix->delayed_pd_active = 1; + mix->mclk_enabled++; + schedule_delayed_work(&mix->delayed_power_down, + timeout + 1); + return; + } + } else + /* restore GPIOs after codec is powered up */ + power_up = 1; + } + mix->shadow_regs[PD_MISC_INDEX] = pd_ctrl; + tsc2301_write_reg(tsc, TSC2301_REG_PD_MISC, pd_ctrl); + if (power_up) + mix->pu_jiffies = jiffies; + if (!poll_pdsts) { + if (power_up) + tsc2301_write_reg(tsc, TSC2301_REG_GPIO, + mix->shadow_regs[GPIO_INDEX]); + return; + } + + /* wait until power-up/-down is completed */ + timeout = jiffies + msecs_to_jiffies(100); + w = 0; + do { + if (time_after(jiffies, timeout)) { + /* Print a warning only if the I2S clock is not + * present / out of sync. This can happen during + * init time, when that clock will be turned on + * by another driver like in the OMAP EAC with + * external clock case. + */ + if (w & TSC2301_REG_PD_MISC_OTSYN) { + dev_warn(&tsc->spi->dev, + "I2S clock not in sync or off.\n"); + } else { + dev_err(&tsc->spi->dev, + "power-up/-down timed out " + "(0x%04x, 0x%04x -> 0x%04x)\n", + w, pd_ctrl_old, pd_ctrl); + } + goto out; + } + w = tsc2301_read_reg(tsc, TSC2301_REG_PD_MISC); + } while (!(w & TSC2301_REG_PD_MISC_PDSTS)); + +out: + if (((pd_ctrl ^ pd_ctrl_old) & TSC2301_REG_PD_MISC_DAPD) && + !(pd_ctrl & TSC2301_REG_PD_MISC_DAPD)) { + /* DAC powered up now. Ensure that DAC and audio outputs are + * activated. They are up 100 msec after the chip power-up + * command */ + timeout = mix->pu_jiffies + TSC2301_DAC_DELAY - jiffies; + if (timeout <= TSC2301_DAC_DELAY) + schedule_timeout_interruptible(timeout); + /* FIXME: This is lazy. We restore GPIOs only after activating + * the DAC. It would be better to do some kind of delayed GPIO + * restore. That ensures that we restore them also if only ADC + * path is activated. But this is required only if there is + * some input amplifier, bias control, etc. and their power + * state is under TSC GPIO control */ + tsc2301_write_reg(tsc, TSC2301_REG_GPIO, + mix->shadow_regs[GPIO_INDEX]); + } +} + +static int snd_tsc2301_info_single(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + int mask = TSC2301_SINGLE_MASK(kcontrol->private_value); + int minval = TSC2301_SINGLE_MINVAL(kcontrol->private_value); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = minval; + uinfo->value.integer.max = mask; + + return 0; +} + +static int snd_tsc2301_get_single(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tsc2301 *tsc = kcontrol->private_data; + unsigned long priv = kcontrol->private_value; + int mask = TSC2301_SINGLE_MASK(priv); + int shift = TSC2301_SINGLE_SHIFT(priv); + int shadow_index = TSC2301_SHADOW_INDEX(priv); + u16 shadow_reg; + + shadow_reg = tsc->mixer->shadow_regs[shadow_index]; + + ucontrol->value.integer.value[0] = (shadow_reg >> shift) & mask; + + return 0; +} + +static int snd_tsc2301_put_single(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tsc2301 *tsc = kcontrol->private_data; + unsigned long priv = kcontrol->private_value; + int mask = TSC2301_SINGLE_MASK(priv); + int shadow_index = TSC2301_SHADOW_INDEX(priv); + u16 shadow_reg, shadow_reg_old; + int shift = TSC2301_SINGLE_SHIFT(priv); + int reg = TSC2301_PVAL_TO_REG(priv); + int changed; + + mutex_lock(&tsc->mixer->mutex); + shadow_reg = shadow_reg_old = tsc->mixer->shadow_regs[shadow_index]; + + /* zero bits to be modified */ + shadow_reg &= ~(mask << shift); + /* modify with new value */ + shadow_reg |= ((ucontrol->value.integer.value[0] & mask) << shift); + + changed = (shadow_reg != shadow_reg_old); + tsc->mixer->shadow_regs[shadow_index] = shadow_reg; + + /* update into TSC2301 if necessary */ + if (changed) + tsc2301_write_reg(tsc, reg, shadow_reg); + mutex_unlock(&tsc->mixer->mutex); + + return changed; +} + +static int snd_tsc2301_info_double(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + /* mask == 1 : Switch + * mask > 1 : Max volume */ + int mask = TSC2301_DOUBLE_MASK(kcontrol->private_value); + int minval = TSC2301_DOUBLE_MINVAL(kcontrol->private_value); + + uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN : + SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = minval; + uinfo->value.integer.max = mask; + + return 0; +} + +static int snd_tsc2301_get_double(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tsc2301 *tsc = kcontrol->private_data; + unsigned long priv = kcontrol->private_value; + /* mask == 1 : Switch + * mask > 1 : Volume */ + int mask = TSC2301_DOUBLE_MASK(priv); + int ls = TSC2301_DOUBLE_LEFT_SHIFT(priv); + int rs = TSC2301_DOUBLE_RIGHT_SHIFT(priv); + int shadow_index = TSC2301_SHADOW_INDEX(priv); + u16 shadow_reg; + + shadow_reg = tsc->mixer->shadow_regs[shadow_index]; + + /* invert mute bits for the switches */ + if (mask == 1) + shadow_reg = ~shadow_reg; + + ucontrol->value.integer.value[0] = (shadow_reg >> ls) & mask; + ucontrol->value.integer.value[1] = (shadow_reg >> rs) & mask; + + return 0; +} + +static int snd_tsc2301_put_double(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tsc2301 *tsc = kcontrol->private_data; + unsigned long priv = kcontrol->private_value; + /* mask == 1 : Switch + * mask > 1 : Volume */ + int mask = TSC2301_DOUBLE_MASK(priv); + int shadow_index = TSC2301_SHADOW_INDEX(priv); + u16 shadow_reg, shadow_reg_old; + int ls = TSC2301_DOUBLE_LEFT_SHIFT(priv); + int rs = TSC2301_DOUBLE_RIGHT_SHIFT(priv); + int reg = TSC2301_PVAL_TO_REG(priv); + int changed; + + mutex_lock(&tsc->mixer->mutex); + shadow_reg = shadow_reg_old = tsc->mixer->shadow_regs[shadow_index]; + + /* zero bits to be modified */ + shadow_reg &= ~((mask << ls) | (mask << rs)); + /* modify with new value */ + if (mask == 1) { + /* switch. Invert switch values for the mute bits */ + shadow_reg |= + ((~ucontrol->value.integer.value[0] & mask) << ls) | + ((~ucontrol->value.integer.value[1] & mask) << rs); + } else { + /* volume */ + shadow_reg |= + (ucontrol->value.integer.value[0] << ls) | + (ucontrol->value.integer.value[1] << rs); + } + + changed = (shadow_reg != shadow_reg_old); + tsc->mixer->shadow_regs[shadow_index] = shadow_reg; + + /* update into TSC2301 if necessary */ + if (changed) + tsc2301_write_reg(tsc, reg, shadow_reg); + + if (mask == 1) + /* check is need to power down/up audio blocks in case of + * muted state change */ + tsc2301_power_ctrl(tsc, shadow_index, 0); + mutex_unlock(&tsc->mixer->mutex); + + return changed; +} + +static int snd_tsc2301_info_mux(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static char *texts[4] = {"Mic", "Line", "Line swapped", "Line mono"}; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 2; + uinfo->value.enumerated.items = 4; + if (uinfo->value.enumerated.item > 3) + uinfo->value.enumerated.item = 3; + strcpy(uinfo->value.enumerated.name, + texts[uinfo->value.enumerated.item]); + + return 0; +} + +static int snd_tsc2301_get_mux(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tsc2301 *tsc = kcontrol->private_data; + unsigned long priv = kcontrol->private_value; + int mask = TSC2301_MUX_MASK(priv); + int ls = TSC2301_MUX_LEFT_SHIFT(priv); + int rs = TSC2301_MUX_RIGHT_SHIFT(priv); + int shadow_index = TSC2301_SHADOW_INDEX(priv); + u16 shadow_reg; + + shadow_reg = tsc->mixer->shadow_regs[shadow_index]; + ucontrol->value.enumerated.item[0] = (shadow_reg >> ls) & mask; + ucontrol->value.enumerated.item[1] = (shadow_reg >> rs) & mask; + + return 0; +} + +static int snd_tsc2301_put_mux(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tsc2301 *tsc = kcontrol->private_data; + unsigned long priv = kcontrol->private_value; + int mask = TSC2301_MUX_MASK(priv); + int shadow_index = TSC2301_SHADOW_INDEX(priv); + u16 shadow_reg, shadow_reg_old; + int ls = TSC2301_MUX_LEFT_SHIFT(priv); + int rs = TSC2301_MUX_RIGHT_SHIFT(priv); + int reg = TSC2301_PVAL_TO_REG(priv); + int changed; + + mutex_lock(&tsc->mixer->mutex); + shadow_reg = shadow_reg_old = tsc->mixer->shadow_regs[shadow_index]; + + /* zero bits to be modified */ + shadow_reg &= ~((mask << ls) | (mask << rs)); + /* modify with new value */ + shadow_reg |= (ucontrol->value.enumerated.item[0] << ls); + shadow_reg |= (ucontrol->value.enumerated.item[1] << rs); + + changed = (shadow_reg != shadow_reg_old); + + /* update into TSC2301 if necessary */ + if (changed) { + tsc->mixer->shadow_regs[shadow_index] = shadow_reg; + tsc2301_write_reg(tsc, reg, shadow_reg); + } + + /* check is need to power up/down audio blocks in case of ADC input + * change */ + tsc2301_power_ctrl(tsc, shadow_index, 0); + mutex_unlock(&tsc->mixer->mutex); + + return changed; +} + +static int snd_tsc2301_info_bool(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + + return 0; +} + +static int snd_tsc2301_get_bool(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tsc2301 *tsc = kcontrol->private_data; + unsigned long priv = kcontrol->private_value; + int shadow_index = TSC2301_SHADOW_INDEX(priv); + int shift = TSC2301_BOOL_SHIFT(priv); + int invert = TSC2301_BOOL_INVERT(priv); + u16 shadow_reg; + + shadow_reg = tsc->mixer->shadow_regs[shadow_index]; + ucontrol->value.integer.value[0] = + invert ^ ((shadow_reg >> shift) & 1); + + return 0; +} + +static int snd_tsc2301_put_bool(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tsc2301 *tsc = kcontrol->private_data; + unsigned long priv = kcontrol->private_value; + int shadow_index = TSC2301_SHADOW_INDEX(priv); + int shift = TSC2301_BOOL_SHIFT(priv); + int invert = TSC2301_BOOL_INVERT(priv); + int reg = TSC2301_PVAL_TO_REG(priv); + u16 shadow_reg, shadow_reg_old; + int changed; + + mutex_lock(&tsc->mixer->mutex); + shadow_reg = shadow_reg_old = tsc->mixer->shadow_regs[shadow_index]; + + /* zero bit to be modified */ + shadow_reg &= ~(1 << shift); + /* modify with new value */ + shadow_reg |= + (invert ^ (ucontrol->value.integer.value[0] & 1)) << shift; + + changed = (shadow_reg != shadow_reg_old); + + /* update into TSC2301 if necessary */ + if (changed) { + tsc->mixer->shadow_regs[shadow_index] = shadow_reg; + if ((shadow_index == GPIO_INDEX) && + (tsc->mixer->shadow_regs[PD_MISC_INDEX] & + TSC2301_REG_PD_MISC_APD)) { + /* changing GPIO control and audio is powered down. + * Update GPIO states according to their power-down + * flag */ + tsc2301_gpio_power_down(tsc); + } else + tsc2301_write_reg(tsc, reg, shadow_reg); + } + mutex_unlock(&tsc->mixer->mutex); + + return changed; +} + +/* TSC2301 internal mixer controls */ +static struct snd_kcontrol_new snd_tsc2301_controls[] = { + /* stereo ADC input switches and volumes */ + TSC2301_DOUBLE("Capture Switch", 0, + TSC2301_REG_ADCVOL, ADCVOL_INDEX, + TSC2301_MUTE_LEFT_SHIFT, TSC2301_MUTE_RIGHT_SHIFT, + 1, 0), + TSC2301_DOUBLE("Capture Volume", 0, + TSC2301_REG_ADCVOL, ADCVOL_INDEX, + TSC2301_VOL_LEFT_SHIFT, TSC2301_VOL_RIGHT_SHIFT, + TSC2301_VOLUME_MASK, TSC2301_MIN_ADCVOL), + + /* stereo DAC output switches and volumes */ + TSC2301_DOUBLE("PCM Playback Switch", 0, + TSC2301_REG_DACVOL, DACVOL_INDEX, + TSC2301_MUTE_LEFT_SHIFT, TSC2301_MUTE_RIGHT_SHIFT, + 1, 0), + TSC2301_DOUBLE("PCM Playback Volume", 0, + TSC2301_REG_DACVOL, DACVOL_INDEX, + TSC2301_VOL_LEFT_SHIFT, TSC2301_VOL_RIGHT_SHIFT, + TSC2301_VOLUME_MASK, TSC2301_MIN_DACVOL), + + /* stereo line input bypass switches and volumes */ + TSC2301_DOUBLE("Line Playback Switch", 0, + TSC2301_REG_BPVOL, BPVOL_INDEX, + TSC2301_MUTE_LEFT_SHIFT, TSC2301_MUTE_RIGHT_SHIFT, + 1, 0), + TSC2301_DOUBLE("Line Playback Volume", 0, + TSC2301_REG_BPVOL, BPVOL_INDEX, + TSC2301_VOL_LEFT_SHIFT, TSC2301_VOL_RIGHT_SHIFT, + TSC2301_VOLUME_MASK, TSC2301_MIN_BPVOL), + + /* mono microphone input gain */ + TSC2301_SINGLE("Mic Boost", 0, + TSC2301_REG_AUDCNTL, AUDCNTL_INDEX, + TSC2301_MICG_SHIFT, + TSC2301_MICG_MASK, TSC2301_MICG_MIN), + + /* ADC input sources. Both channels could be selected separately */ + TSC2301_MUX("Capture Source", 0, + TSC2301_REG_AUDCNTL, AUDCNTL_INDEX, + TSC2301_INML_SHIFT, TSC2301_INMR_SHIFT, + TSC2301_INM_MASK), +}; + +/* must be called tsc->mixer->mutex locked */ +static void tsc2301_flush_shadow_regs(struct tsc2301 *tsc) +{ + int i, page, addr; + u16 temp; + + page = TSC2301_REG_TO_PAGE(TSC2301_REG_AUDCNTL); + addr = TSC2301_REG_TO_ADDR(TSC2301_REG_AUDCNTL); + + for (i = 0; i < 4; i++) { + temp = tsc->mixer->shadow_regs[i]; + tsc2301_write_reg(tsc, TSC2301_REG(page, addr + i), temp); + } + temp = tsc->mixer->shadow_regs[GPIO_INDEX]; + tsc2301_write_reg(tsc, TSC2301_REG_GPIO, temp); + + /* Update power state of all audio blocks depending are they + * muted or unused. */ + tsc2301_power_ctrl(tsc, -1, 0); +} + +#ifdef CONFIG_PM +int tsc2301_mixer_suspend(struct tsc2301 *tsc) +{ + /* power down entire audio section inside TSC2301 in case the + * chip is still powered during the system sleep. However this driver + * doesn't require that chip is powered because registers are restored + * in function tsc2301_mixer_resume */ + mutex_lock(&tsc->mixer->mutex); + tsc2301_gpio_power_down(tsc); + tsc->mixer->shadow_regs[PD_MISC_INDEX] |= TSC2301_REG_PD_MISC_APD; + tsc2301_write_reg(tsc, TSC2301_REG_PD_MISC, + tsc->mixer->shadow_regs[PD_MISC_INDEX]); + mutex_unlock(&tsc->mixer->mutex); + return 0; +} + +void tsc2301_mixer_resume(struct tsc2301 *tsc) +{ + /* power up the TSC2301 audio section and restore registers */ + mutex_lock(&tsc->mixer->mutex); + tsc->mixer->shadow_regs[PD_MISC_INDEX] &= ~TSC2301_REG_PD_MISC_APD; + tsc2301_flush_shadow_regs(tsc); + mutex_unlock(&tsc->mixer->mutex); +} +#endif + +void tsc2301_mixer_enable_mclk(struct device *dev) +{ + struct tsc2301 *tsc = dev_get_drvdata(dev); + struct tsc2301_mixer *mix = tsc->mixer; + + mutex_lock(&mix->mutex); + if (!mix->mclk_enabled++ && tsc->enable_clock != NULL) { + tsc->enable_clock(dev); + } + tsc2301_power_ctrl(tsc, -1, 1); + mutex_unlock(&mix->mutex); +} + +void tsc2301_mixer_disable_mclk(struct device *dev) +{ + struct tsc2301 *tsc = dev_get_drvdata(dev); + struct tsc2301_mixer *mix = tsc->mixer; + + mutex_lock(&mix->mutex); + mix->mclk_enabled--; + tsc2301_power_ctrl(tsc, -1, 1); + if (!mix->mclk_enabled && tsc->disable_clock != NULL) { + tsc->disable_clock(dev); + } + mutex_unlock(&mix->mutex); +} + +static void tsc2301_mixer_delayed_power_down(struct work_struct *work) +{ + struct tsc2301_mixer *mix = container_of(work, struct tsc2301_mixer, + delayed_power_down.work); + struct tsc2301 *tsc = mix->tsc; + + mutex_lock(&mix->mutex); + if (!mix->delayed_pd_active) { + mutex_unlock(&mix->mutex); + return; + } + mix->delayed_pd_active = 0; + mutex_unlock(&mix->mutex); + tsc2301_mixer_disable_mclk(&tsc->spi->dev); +} + +/* + * Allows audio controller driver to notify its usage of ADC and DAC + */ +void tsc2301_mixer_set_power(struct device *dev, int dac, int adc) +{ + struct tsc2301 *tsc = dev_get_drvdata(dev); + + mutex_lock(&tsc->mixer->mutex); + tsc->mixer->adc_enabled = adc; + tsc->mixer->dac_enabled = dac; + + /* update power state of all audio blocks */ + tsc2301_power_ctrl(tsc, -1, 1); + mutex_unlock(&tsc->mixer->mutex); +} + +/* + * Registers TSC2301 ALSA Mixer controls for the given sound card + */ +int tsc2301_mixer_register_controls(struct device *dev, struct snd_card *card) +{ + struct tsc2301 *tsc = dev_get_drvdata(dev); + struct tsc2301_mixer *mix = tsc->mixer; + int i, err; + + /* Register ALSA mixer controls */ + for (i = 0; i < ARRAY_SIZE(snd_tsc2301_controls); i++) { + err = snd_ctl_add(card, + snd_ctl_new1(&snd_tsc2301_controls[i], tsc)); + if (err < 0) + return err; + } + + if (!mix->n_mixer_gpios) + return 0; + + /* Register additional GPIO controls if defined */ + for (i = 0; i < mix->n_mixer_gpios; i++) { + const struct tsc2301_mixer_gpio *mg = mix->mixer_gpios + i; + struct snd_kcontrol *ctrlp; + struct snd_kcontrol_new ctrl = + TSC2301_BOOL((char *)mg->name, 0, + TSC2301_REG_GPIO, GPIO_INDEX, + mg->gpio, mg->inverted, mg->def_enable); + + ctrlp = snd_ctl_new1(&ctrl, tsc); + err = snd_ctl_add(card, ctrlp); + if (err < 0) + return err; + } + + return 0; +} + +int tsc2301_mixer_init(struct tsc2301 *tsc, + struct tsc2301_platform_data *pdata) +{ + struct tsc2301_mixer *mix; + int err = 0; + u16 w; + + mix = kzalloc(sizeof(*mix), GFP_KERNEL); + if (mix == NULL) + return -ENOMEM; + tsc->mixer = mix; + + mix->tsc = tsc; + mutex_init(&mix->mutex); + mix->platform_init = pdata->codec_init; + mix->platform_cleanup = pdata->codec_cleanup; + mix->pll_output = pdata->pll_output; + + INIT_DELAYED_WORK(&mix->delayed_power_down, + tsc2301_mixer_delayed_power_down); + + /* initialize shadow register default values */ + w = 0xc000; + w |= (pdata->mclk_ratio << 6) | (pdata->i2s_sample_rate << 2); + w |= pdata->i2s_format; + mix->shadow_regs[AUDCNTL_INDEX] = w; + mix->shadow_regs[ADCVOL_INDEX] = 0xd7d7; + mix->shadow_regs[DACVOL_INDEX] = 0xffff; + mix->shadow_regs[BPVOL_INDEX] = 0xe7e7; + mix->shadow_regs[PD_MISC_INDEX] = pdata->power_down_blocks; + + /* if extra mixer controls configured, then configure associated + * GPIOs as output and drive their default state */ + if (pdata->n_mixer_gpios) { + int i; + + w = 0; + for (i = 0; i < pdata->n_mixer_gpios; i++) { + const struct tsc2301_mixer_gpio *mg; + int gpio; + + mg = pdata->mixer_gpios + i; + gpio = mg->gpio; + w |= (1 << gpio) << 8; + w |= (mg->inverted ^ mg->def_enable) << gpio; + } + mix->shadow_regs[GPIO_INDEX] = w; + + mix->mixer_gpios = kmalloc(sizeof(*pdata->mixer_gpios) * + pdata->n_mixer_gpios, + GFP_KERNEL); + if (mix->mixer_gpios == NULL) { + err = -ENOMEM; + goto err1; + } + memcpy(mix->mixer_gpios, pdata->mixer_gpios, + sizeof(*pdata->mixer_gpios) * pdata->n_mixer_gpios); + mix->n_mixer_gpios = pdata->n_mixer_gpios; + } + + /* PLL control */ + tsc2301_write_pll(tsc, pdata->pll_n, pdata->pll_a, pdata->pll_pdc, + 0, mix->pll_output ? 0 : 1); + + tsc2301_flush_shadow_regs(tsc); + + if (mix->platform_init != NULL) { + err = mix->platform_init(&tsc->spi->dev); + if (err < 0) + goto err2; + } + + return 0; +err2: + if (mix->mixer_gpios != NULL) + kfree(mix->mixer_gpios); +err1: + kfree(mix); + return err; +} + +void tsc2301_mixer_exit(struct tsc2301 *tsc) +{ + struct tsc2301_mixer *mixer = tsc->mixer; + + if (mixer->platform_cleanup != NULL) + mixer->platform_cleanup(&tsc->spi->dev); + + if (mixer->mixer_gpios != NULL) + kfree(mixer->mixer_gpios); +} + +MODULE_AUTHOR("Jarkko Nikula "); +MODULE_LICENSE("GPL"); Index: linux-3.1/include/linux/spi/tsc2301.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-3.1/include/linux/spi/tsc2301.h 2011-10-30 00:48:48.989043470 +0200 @@ -0,0 +1,208 @@ +#ifndef _LINUX_SPI_TSC2301_H +#define _LINUX_SPI_TSC2301_H + +#include +#include + +struct tsc2301_platform_data { + /* + * Keypad + */ + s16 reset_gpio; + s16 keyb_int; + s16 keymap[16]; /* Set a key to a negative value if not used */ + unsigned kp_rep:1; /* Enable keypad repeating */ + char *keyb_name; /* Keyboard device name */ + + /* + * Touchscreen + */ + s16 dav_int; + u16 ts_x_plate_ohm; + u32 ts_stab_time; /* voltage settling time */ + u8 ts_hw_avg; /* HW assiseted averaging. Can be + 0, 4, 8, 16 samples per reading */ + u32 ts_max_pressure;/* Samples with bigger pressure value will + be ignored, since the corresponding X, Y + values are unreliable */ + u32 ts_touch_pressure; /* Pressure limit until we report a + touch event. After that we switch + to ts_max_pressure. */ + u32 ts_pressure_fudge; + u32 ts_x_max; + u32 ts_x_fudge; + u32 ts_y_max; + u32 ts_y_fudge; + + /* + * Audio + */ + unsigned pll_pdc:4; + unsigned pll_a:4; + unsigned pll_n:4; + unsigned pll_output:1; /* Output PLL on GPIO_0 */ + + unsigned mclk_ratio:2; + unsigned i2s_sample_rate:4; + unsigned i2s_format:2; + /* Mask for audio blocks to be powered down */ + u16 power_down_blocks; + + /* Called after codec has been initialized, can be NULL */ + int (* codec_init)(struct device *tsc2301_dev); + /* Called when codec is being removed, can be NULL */ + void (* codec_cleanup)(struct device *tsc2301_dev); + int (*enable_clock)(struct device *dev); + void (*disable_clock)(struct device *dev); + + const struct tsc2301_mixer_gpio { + const char *name; + unsigned gpio:4; + unsigned inverted:1; + unsigned def_enable:1; /* enable by default */ + unsigned deactivate_on_pd:1; /* power-down flag */ + } *mixer_gpios; + int n_mixer_gpios; +}; + +struct tsc2301_kp; +struct tsc2301_ts; +struct tsc2301_mixer; + +struct tsc2301 { + struct spi_device *spi; + + s16 reset_gpio; + u16 config2_shadow; + + struct tsc2301_kp *kp; + struct tsc2301_ts *ts; + struct tsc2301_mixer *mixer; + + int (*enable_clock)(struct device *dev); + void (*disable_clock)(struct device *dev); +}; + + +#define TSC2301_HZ 33000000 + +#define TSC2301_REG(page, addr) (((page) << 11) | ((addr) << 5)) +#define TSC2301_REG_TO_PAGE(reg) (((reg) >> 11) & 0x03) +#define TSC2301_REG_TO_ADDR(reg) (((reg) >> 5) & 0x1f) + +#define TSC2301_REG_X TSC2301_REG(0, 0) +#define TSC2301_REG_Y TSC2301_REG(0, 1) +#define TSC2301_REG_Z1 TSC2301_REG(0, 2) +#define TSC2301_REG_Z2 TSC2301_REG(0, 3) +#define TSC2301_REG_KPDATA TSC2301_REG(0, 4) +#define TSC2301_REG_ADC TSC2301_REG(1, 0) +#define TSC2301_REG_KEY TSC2301_REG(1, 1) +#define TSC2301_REG_DAC TSC2301_REG(1, 2) +#define TSC2301_REG_REF TSC2301_REG(1, 3) +#define TSC2301_REG_RESET TSC2301_REG(1, 4) +#define TSC2301_REG_CONFIG TSC2301_REG(1, 5) +#define TSC2301_REG_CONFIG2 TSC2301_REG(1, 6) +#define TSC2301_REG_KPMASK TSC2301_REG(1, 16) +#define TSC2301_REG_AUDCNTL TSC2301_REG(2, 0) +#define TSC2301_REG_ADCVOL TSC2301_REG(2, 1) +#define TSC2301_REG_DACVOL TSC2301_REG(2, 2) +#define TSC2301_REG_BPVOL TSC2301_REG(2, 3) +#define TSC2301_REG_KEYCTL TSC2301_REG(2, 4) +#define TSC2301_REG_PD_MISC TSC2301_REG(2, 5) +#define TSC2301_REG_GPIO TSC2301_REG(2, 6) +#define TSC2301_REG_ADCLKCFG TSC2301_REG(2, 27) + +#define TSC2301_REG_PD_MISC_APD (1 << 15) +#define TSC2301_REG_PD_MISC_AVPD (1 << 14) +#define TSC2301_REG_PD_MISC_ABPD (1 << 13) +#define TSC2301_REG_PD_MISC_HAPD (1 << 12) +#define TSC2301_REG_PD_MISC_MOPD (1 << 11) +#define TSC2301_REG_PD_MISC_DAPD (1 << 10) +#define TSC2301_REG_PD_MISC_ADPDL (1 << 9) +#define TSC2301_REG_PD_MISC_ADPDR (1 << 8) +#define TSC2301_REG_PD_MISC_PDSTS (1 << 7) +#define TSC2301_REG_PD_MISC_MIBPD (1 << 6) +#define TSC2301_REG_PD_MISC_OTSYN (1 << 2) + +/* I2S sample rate */ +#define TSC2301_I2S_SR_48000 0x00 +#define TSC2301_I2S_SR_44100 0x01 +#define TSC2301_I2S_SR_32000 0x02 +#define TSC2301_I2S_SR_24000 0x03 +#define TSC2301_I2S_SR_22050 0x04 +#define TSC2301_I2S_SR_16000 0x05 +#define TSC2301_I2S_SR_12000 0x06 +#define TSC2301_I2S_SR_11050 0x07 +#define TSC2301_I2S_SR_8000 0x08 + +/* 16-bit, MSB-first. DAC Right-Justified, ADC Left-Justified */ +#define TSC2301_I2S_FORMAT0 0x00 +/* 20-bit, MSB-first. DAC Right-Justified, ADC Left-Justified */ +#define TSC2301_I2S_FORMAT1 0x01 +/* 20-bit, MSB-first. DAC Left-Justified, ADC Left-Justified */ +#define TSC2301_I2S_FORMAT2 0x02 +/* 20-bit, MSB-first */ +#define TSC2301_I2S_FORMAT3 0x03 + +/* Master Clock Ratio */ +#define TSC2301_MCLK_256xFS 0x00 /* default */ +#define TSC2301_MCLK_384xFS 0x01 +#define TSC2301_MCLK_512xFS 0x02 + + +extern u16 tsc2301_read_reg(struct tsc2301 *tsc, int reg); +extern void tsc2301_write_reg(struct tsc2301 *tsc, int reg, u16 val); +extern void tsc2301_write_kbc(struct tsc2301 *tsc, int val); +extern void tsc2301_write_pll(struct tsc2301 *tsc, int pll_n, int pll_a, + int pll_pdc, int pct_e, int pll_o); +extern void tsc2301_read_buf(struct tsc2301 *tsc, int reg, u16 *buf, int len); + +#define TSC2301_DECL_MOD(module) \ +extern int tsc2301_##module##_init(struct tsc2301 *tsc, \ + struct tsc2301_platform_data *pdata); \ +extern void tsc2301_##module##_exit(struct tsc2301 *tsc); \ +extern int tsc2301_##module##_suspend(struct tsc2301 *tsc); \ +extern void tsc2301_##module##_resume(struct tsc2301 *tsc); + +#define TSC2301_DECL_EMPTY_MOD(module) \ +static inline int tsc2301_##module##_init(struct tsc2301 *tsc, \ + struct tsc2301_platform_data *pdata) \ +{ \ + return 0; \ +} \ +static inline void tsc2301_##module##_exit(struct tsc2301 *tsc) {} \ +static inline int tsc2301_##module##_suspend(struct tsc2301 *tsc) \ +{ \ + return 0; \ +} \ +static inline void tsc2301_##module##_resume(struct tsc2301 *tsc) {} + +#ifdef CONFIG_KEYBOARD_TSC2301 +TSC2301_DECL_MOD(kp) +void tsc2301_kp_restart(struct tsc2301 *tsc); +#else +TSC2301_DECL_EMPTY_MOD(kp) +static inline void tsc2301_kp_restart(struct tsc2301 *tsc) {} +#endif + +#ifdef CONFIG_TOUCHSCREEN_TSC2301 +TSC2301_DECL_MOD(ts) +#else +TSC2301_DECL_EMPTY_MOD(ts) +#endif + +#ifdef CONFIG_SPI_TSC2301_AUDIO +TSC2301_DECL_MOD(mixer) +extern void tsc2301_mixer_set_power(struct device *tsc_dev, int dac, int adc); + +struct snd_card; +extern int tsc2301_mixer_register_controls(struct device *tsc_dev, + struct snd_card *card); +#else +TSC2301_DECL_EMPTY_MOD(mixer) +#endif + +extern void tsc2301_mixer_enable_mclk(struct device *tsc_dev); +extern void tsc2301_mixer_disable_mclk(struct device *tsc_dev); + +#endif