Index: linux-2.6.38-rc6/drivers/cbus/Kconfig =================================================================== --- linux-2.6.38-rc6.orig/drivers/cbus/Kconfig 2011-03-01 19:56:10.396378152 +0100 +++ linux-2.6.38-rc6/drivers/cbus/Kconfig 2011-03-01 19:56:10.669365669 +0100 @@ -72,4 +72,12 @@ config CBUS_RETU_HEADSET to Retu/Vilma. Detection state and events are exposed through sysfs. +config N810BM + depends on CBUS_RETU && CBUS_TAHVO + tristate "Nokia n810 battery management" + ---help--- + Nokia n810 device battery management. + + If unsure, say N. + endmenu Index: linux-2.6.38-rc6/drivers/cbus/Makefile =================================================================== --- linux-2.6.38-rc6.orig/drivers/cbus/Makefile 2011-03-01 19:56:10.396378152 +0100 +++ linux-2.6.38-rc6/drivers/cbus/Makefile 2011-03-01 19:56:10.669365669 +0100 @@ -11,3 +11,6 @@ obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += r obj-$(CONFIG_CBUS_RETU_RTC) += retu-rtc.o obj-$(CONFIG_CBUS_RETU_WDT) += retu-wdt.o obj-$(CONFIG_CBUS_RETU_HEADSET) += retu-headset.o +n810bm-y += n810bm_main.o +n810bm-y += lipocharge.o +obj-$(CONFIG_N810BM) += n810bm.o Index: linux-2.6.38-rc6/drivers/cbus/n810bm_main.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.38-rc6/drivers/cbus/n810bm_main.c 2011-03-01 21:15:45.484648402 +0100 @@ -0,0 +1,1586 @@ +/* + * Nokia n810 battery management + * + * WARNING: This driver is based on unconfirmed documentation. + * It is possibly dangerous to use this software. + * Use this software at your own risk! + * + * Copyright (c) 2010-2011 Michael Buesch + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cbus.h" +#include "retu.h" +#include "tahvo.h" +#include "lipocharge.h" + + +#define N810BM_PMM_BLOCK_FILENAME "n810-cal-bme-pmm.fw" +#define N810BM_PMM_BLOCK_SIZE 0x600 +#define N810BM_PMM_GROUP_SIZE 0x200 +#define N810BM_PMM_ELEM_SIZE 0x10 + +#define N810BM_CHECK_INTERVAL (HZ * 2) +#define N810BM_MIN_VOLTAGE_THRES 3200 /* Absolute minimum voltage threshold */ + + +/* RETU_ADC_BSI + * The battery size indicator ADC measures the resistance between + * the battery BSI pin and ground. This is used to detect the battery + * capacity, as the BSI resistor is related to capacity. + * + * Manually measured lookup table. + * Hard to measure, thus not very accurate. + * + * Resistance | ADC value + * ======================== + * 120k | 0x3AC + * 110k | 0x37C + * 100k | 0x351 + * 90k | 0x329 + */ + +/* RETU_ADC_BATTVOLT + * Manually measured lookup table. + * Hard to measure, thus not very accurate. + * + * Voltage | ADC value + * ===================== + * 2.80V | 0x037 + * 2.90V | 0x05E + * 3.00V | 0x090 + * 3.10V | 0x0A4 + * 3.20V | 0x0CC + * 3.30V | 0x0EF + * 3.40V | 0x115 + * 3.50V | 0x136 + * 3.60V | 0x15C + * 3.70V | 0x187 + * 3.80V | 0x1A5 + * 3.90V | 0x1C9 + * 4.00V | 0x1ED + * 4.10V | 0x212 + * 4.20V | 0x236 + */ + + +/* PMM block ADC IDs */ +enum n810bm_pmm_adc_id { + N810BM_PMM_ADC_BATVOLT = 0x01, /* Battery voltage */ + N810BM_PMM_ADC_CHGVOLT = 0x02, /* Charger voltage */ + N810BM_PMM_ADC_GND2 = 0x03, /* Ground 0V */ + N810BM_PMM_ADC_BSI = 0x04, /* Battery size indicator */ + N810BM_PMM_ADC_BATTEMP = 0x05, /* Battery temperature */ + N810BM_PMM_ADC_HEADSET = 0x06, /* Headset detection */ + N810BM_PMM_ADC_HOOKDET = 0x07, /* Hook detection */ + N810BM_PMM_ADC_LIGHTSENS = 0x08, /* Light sensor */ + N810BM_PMM_ADC_BATCURR = 0x0E, /* Battery current */ + N810BM_PMM_ADC_BKUPVOLT = 0x13, /* Backup battery voltage */ + N810BM_PMM_ADC_LIGHTTEMP = 0x14, /* Light sensor temperature */ + N810BM_PMM_ADC_RFGP = 0x15, /* RF GP */ + N810BM_PMM_ADC_WBTX = 0x16, /* Wideband TX detection */ + N810BM_PMM_ADC_RETUTEMP = 0x17, /* RETU chip temperature */ + N810BM_PMM_ADC_0xFE = 0xFE, +}; + +struct n810bm_adc_calib { + enum n810bm_pmm_adc_id id; + u8 flags; + u8 adc_groupnr; + u32 field1; + u32 field2; + u16 field3; + u16 field4; +}; + +struct n810bm_calib { + struct n810bm_adc_calib adc[25]; +}; + +enum n810bm_capacity { + N810BM_CAP_UNKNOWN = -1, + N810BM_CAP_NONE = 0, + N810BM_CAP_1500MAH = 1500, /* 1500 mAh battery */ +}; + +enum n810bm_notify_flags { + N810BM_NOTIFY_charger_present, + N810BM_NOTIFY_charger_state, + N810BM_NOTIFY_charger_pwm, +}; + +struct n810bm { + bool battery_present; /* A battery is inserted */ + bool charger_present; /* The charger is connected */ + enum n810bm_capacity capacity; /* The capacity of the inserted battery (if any) */ + + bool charger_enabled; /* Want to charge? */ + struct lipocharge charger; /* Charger subsystem */ + unsigned int active_current_pwm; /* Active value of TAHVO_REG_CHGCURR */ + int current_measure_enabled; /* Current measure enable refcount */ + + struct platform_device *pdev; + struct n810bm_calib calib; /* Calibration data */ + + bool verbose_charge_log; /* Verbose charge logging */ + + unsigned long notify_flags; + struct work_struct notify_work; + struct work_struct currmeas_irq_work; + struct delayed_work periodic_check_work; + + bool initialized; /* The hardware was initialized */ + struct mutex mutex; +}; + +static void n810bm_notify_charger_present(struct n810bm *bm); +static void n810bm_notify_charger_state(struct n810bm *bm); +static void n810bm_notify_charger_pwm(struct n810bm *bm); + + +static struct platform_device *n810bm_retu_device; +static struct platform_device *n810bm_tahvo_device; + + +static inline struct n810bm * device_to_n810bm(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct n810bm *bm = platform_get_drvdata(pdev); + + return bm; +} + +static inline bool n810bm_known_battery_present(struct n810bm *bm) +{ + return bm->battery_present && + bm->capacity != N810BM_CAP_UNKNOWN && + bm->capacity != N810BM_CAP_NONE; +} + +static NORET_TYPE void n810bm_emergency(struct n810bm *bm, const char *message) ATTRIB_NORET; +static void n810bm_emergency(struct n810bm *bm, const char *message) +{ + printk(KERN_EMERG "n810 battery management fatal fault: %s\n", message); + cbus_emergency(); +} + +static u16 tahvo_read(struct n810bm *bm, unsigned int reg) +{ + return tahvo_read_reg(reg); +} + +static void tahvo_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set) +{ + tahvo_set_clear_reg_bits(reg, set, mask); +} + +static inline void tahvo_write(struct n810bm *bm, unsigned int reg, u16 value) +{ + unsigned long flags; + + spin_lock_irqsave(&tahvo_lock, flags); + tahvo_write_reg(reg, value); + spin_unlock_irqrestore(&tahvo_lock, flags); +} + +static inline void tahvo_set(struct n810bm *bm, unsigned int reg, u16 mask) +{ + tahvo_set_clear_reg_bits(reg, mask, mask); +} + +static inline void tahvo_clear(struct n810bm *bm, unsigned int reg, u16 mask) +{ + tahvo_set_clear_reg_bits(reg, 0, mask); +} + +static u16 retu_read(struct n810bm *bm, unsigned int reg) +{ + return retu_read_reg(&n810bm_retu_device->dev, reg); +} + +static void retu_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set) +{ + retu_set_clear_reg_bits(&n810bm_retu_device->dev, reg, set, mask); +} + +static inline void retu_write(struct n810bm *bm, unsigned int reg, u16 value) +{ + retu_write_reg(&n810bm_retu_device->dev, reg, value); +} + +static int retu_adc_average(struct n810bm *bm, unsigned int chan, + unsigned int nr_passes) +{ + unsigned int i, value = 0; + int ret; + + if (WARN_ON(!nr_passes)) + return 0; + for (i = 0; i < nr_passes; i++) { + ret = retu_read_adc(&n810bm_retu_device->dev, chan); + if (ret < 0) + return ret; + value += ret; + } + value /= nr_passes; + + return value; +} + +static struct n810bm_adc_calib * n810bm_get_adc_calib(struct n810bm *bm, + enum n810bm_pmm_adc_id id) +{ + unsigned int index = 0; + struct n810bm_adc_calib *cal; + + if (id != N810BM_PMM_ADC_0xFE) + index = (unsigned int)id + 1; + if (index >= ARRAY_SIZE(bm->calib.adc)) + return NULL; + + cal = &bm->calib.adc[index]; + WARN_ON(cal->id && cal->id != id); + + return cal; +} + +static int pmm_record_get(struct n810bm *bm, + const struct firmware *pmm_block, + void *buffer, size_t length, + unsigned int group, unsigned int element, unsigned int offset) +{ + const u8 *pmm_area = pmm_block->data; + u8 active_group_mask; + + if (pmm_block->size != N810BM_PMM_BLOCK_SIZE) + return -EINVAL; + if (group >= N810BM_PMM_BLOCK_SIZE / N810BM_PMM_GROUP_SIZE) + return -EINVAL; + if (element >= N810BM_PMM_GROUP_SIZE / N810BM_PMM_ELEM_SIZE) + return -EINVAL; + if (offset >= N810BM_PMM_ELEM_SIZE || length > N810BM_PMM_ELEM_SIZE || + length + offset > N810BM_PMM_ELEM_SIZE) + return -EINVAL; + + active_group_mask = pmm_area[16]; + if (!(active_group_mask & (1 << group))) { + dev_dbg(&bm->pdev->dev, "pwm_record_get: Requested group %u, " + "but group is not active", group); + return -ENOENT; + } + + memcpy(buffer, + pmm_area + group * N810BM_PMM_GROUP_SIZE + + element * N810BM_PMM_ELEM_SIZE + + offset, + length); + + return 0; +} + +/* PMM block group 1 element */ +struct group1_element { + u8 id; + u8 flags; + u8 adc_groupnr; + u8 _padding; + __le32 field1; + __le32 field2; +} __packed; + +static int extract_group1_elem(struct n810bm *bm, + const struct firmware *pmm_block, + const enum n810bm_pmm_adc_id *pmm_adc_ids, size_t nr_pmm_adc_ids, + u32 field1_mask, u32 field2_mask) +{ + struct group1_element elem; + int err; + unsigned int i, element_nr; + struct n810bm_adc_calib *adc_calib; + + for (i = 0; i < nr_pmm_adc_ids; i++) { + element_nr = (unsigned int)(pmm_adc_ids[i]) + 3; + + err = pmm_record_get(bm, pmm_block, &elem, sizeof(elem), + 1, element_nr, 0); + if (err) + continue; + adc_calib = n810bm_get_adc_calib(bm, elem.id); + if (!adc_calib) { + dev_err(&bm->pdev->dev, "extract_group1_elem: " + "Could not get calib element for 0x%02X", + elem.id); + return -EINVAL; + } + + if (adc_calib->flags == elem.flags) { + adc_calib->field1 = le32_to_cpu(elem.field1) & field1_mask; + adc_calib->field2 = le32_to_cpu(elem.field2) & field2_mask; + } else { + dev_dbg(&bm->pdev->dev, "extract_group1_elem: " + "Not extracting fields due to flags mismatch: " + "0x%02X vs 0x%02X", + adc_calib->flags, elem.flags); + } + } + + return 0; +} + +static int n810bm_parse_pmm_group1(struct n810bm *bm, + const struct firmware *pmm_block) +{ + struct n810bm_adc_calib *adc_calib; + struct group1_element elem; + int err; + + static const enum n810bm_pmm_adc_id pmm_adc_ids_1[] = { + N810BM_PMM_ADC_BATVOLT, + N810BM_PMM_ADC_CHGVOLT, + N810BM_PMM_ADC_BKUPVOLT, + N810BM_PMM_ADC_BATCURR, + }; + static const enum n810bm_pmm_adc_id pmm_adc_ids_2[] = { + N810BM_PMM_ADC_BSI, + }; + static const enum n810bm_pmm_adc_id pmm_adc_ids_3[] = { + N810BM_PMM_ADC_BATTEMP, + }; + + /* Parse element 2 */ + err = pmm_record_get(bm, pmm_block, &elem, sizeof(elem), + 1, 2, 0); + if (err) { + dev_err(&bm->pdev->dev, + "PMM: Failed to get group 1 / element 2"); + return err; + } + if (elem.id == N810BM_PMM_ADC_0xFE && elem.flags == 0x05) { + adc_calib = n810bm_get_adc_calib(bm, elem.id); + if (!adc_calib) { + dev_err(&bm->pdev->dev, + "calib extract: Failed to get 0xFE calib"); + return -EINVAL; + } + adc_calib->id = elem.id; + adc_calib->flags = elem.flags; + adc_calib->field1 = le32_to_cpu(elem.field1); + adc_calib->field2 = le32_to_cpu(elem.field2); + } + + err = extract_group1_elem(bm, pmm_block, + pmm_adc_ids_1, ARRAY_SIZE(pmm_adc_ids_1), + 0xFFFFFFFF, 0xFFFFFFFF); + if (err) + return err; + err = extract_group1_elem(bm, pmm_block, + pmm_adc_ids_2, ARRAY_SIZE(pmm_adc_ids_2), + 0xFFFFFFFF, 0); + if (err) + return err; + err = extract_group1_elem(bm, pmm_block, + pmm_adc_ids_3, ARRAY_SIZE(pmm_adc_ids_3), + 0xFFFFFFFF, 0x0000FFFF); + if (err) + return err; + + return 0; +} + +static int n810bm_parse_pmm_group2(struct n810bm *bm, + const struct firmware *pmm_block) +{ + dev_err(&bm->pdev->dev, "TODO: CAL BME PMM group 2 parser not implemented, yet"); + return -EOPNOTSUPP; +} + +static void n810bm_adc_calib_set_defaults(struct n810bm *bm) +{ + struct n810bm_adc_calib *adc_calib; + unsigned int i; + + static const struct n810bm_adc_calib defaults[] = { + /* ADC group-nr 0 */ + { + .id = N810BM_PMM_ADC_HEADSET, + .flags = 0x00, + .adc_groupnr = 0, + }, { + .id = N810BM_PMM_ADC_HOOKDET, + .flags = 0x00, + .adc_groupnr = 0, + }, { + .id = N810BM_PMM_ADC_RFGP, + .flags = 0x00, + .adc_groupnr = 0, + }, { + .id = N810BM_PMM_ADC_LIGHTSENS, + .flags = 0x00, + .adc_groupnr = 0, + }, { + .id = N810BM_PMM_ADC_WBTX, + .flags = 0x00, + .adc_groupnr = 0, + }, { + .id = N810BM_PMM_ADC_RETUTEMP, + .flags = 0x00, + .adc_groupnr = 0, + }, { + .id = N810BM_PMM_ADC_GND2, + .flags = 0x00, + .adc_groupnr = 0, + }, + /* ADC group-nr 1 */ + { + .id = N810BM_PMM_ADC_0xFE, + .flags = 0x05, + .adc_groupnr = 1, + .field1 = (u32)-2, + .field2 = 13189, + }, { + .id = N810BM_PMM_ADC_BATVOLT, + .flags = 0x01, + .adc_groupnr = 1, + .field1 = 2527, + .field2 = 21373, + }, { + .id = N810BM_PMM_ADC_CHGVOLT, + .flags = 0x01, + .adc_groupnr = 1, + .field1 = 0, + .field2 = 129848, + }, { + .id = N810BM_PMM_ADC_BKUPVOLT, + .flags = 0x01, + .adc_groupnr = 1, + .field1 = 0, + .field2 = 20000, + }, { + .id = N810BM_PMM_ADC_BATCURR, + .flags = 0x06, + .adc_groupnr = 1, + .field1 = 0, + .field2 = 9660, + }, + /* ADC group-nr 2 */ + { + .id = N810BM_PMM_ADC_BSI, + .flags = 0x02, + .adc_groupnr = 2, + .field1 = 1169, + .field2 = 0, + }, + /* ADC group-nr 3 */ + { + .id = N810BM_PMM_ADC_BATTEMP, + .flags = 0x03, + .adc_groupnr = 3, + .field1 = 265423000, + .field2 = 298, + }, + /* ADC group-nr 4 */ + { + .id = N810BM_PMM_ADC_LIGHTTEMP, + .flags = 0x04, + .adc_groupnr = 4, + .field1 = 19533778, + .field2 = 308019670, + .field3 = 4700, + .field4 = 2500, + }, + }; + + /* Clear the array */ + memset(&bm->calib.adc, 0, sizeof(bm->calib.adc)); + for (i = 0; i < ARRAY_SIZE(bm->calib.adc); i++) + bm->calib.adc[i].flags = 0xFF; + + /* Copy the defaults */ + for (i = 0; i < ARRAY_SIZE(defaults); i++) { + adc_calib = n810bm_get_adc_calib(bm, defaults[i].id); + if (WARN_ON(!adc_calib)) + continue; + *adc_calib = defaults[i]; + } +} + +static int n810bm_parse_pmm_block(struct n810bm *bm, + const struct firmware *pmm_block) +{ + u8 byte; + int err; + unsigned int i, count; + struct n810bm_adc_calib *adc_calib; + + /* Initialize to defaults */ + n810bm_adc_calib_set_defaults(bm); + + /* Parse the PMM data */ + err = pmm_record_get(bm, pmm_block, &byte, sizeof(byte), + 1, 0, 0); /* group 1 / element 0 */ + err |= (byte != 0x01); + err |= pmm_record_get(bm, pmm_block, &byte, sizeof(byte), + 1, 1, 0); /* group 1 / element 1 */ + err |= (byte != 0x01); + if (err) + err = n810bm_parse_pmm_group2(bm, pmm_block); + else + err = n810bm_parse_pmm_group1(bm, pmm_block); + if (err) + return err; + + /* Sanity checks */ + for (i = 0, count = 0; i < ARRAY_SIZE(bm->calib.adc); i++) { + adc_calib = &bm->calib.adc[i]; + if (adc_calib->flags == 0xFF) + continue; + switch (adc_calib->id) { + case N810BM_PMM_ADC_BATVOLT: + if (adc_calib->field1 < 2400 || + adc_calib->field1 > 2700) + goto value_check_fail; + if (adc_calib->field2 < 20000 || + adc_calib->field2 > 23000) + goto value_check_fail; + count++; + break; + case N810BM_PMM_ADC_BSI: + if (adc_calib->field1 < 1100 || + adc_calib->field1 > 1300) + goto value_check_fail; + count++; + break; + case N810BM_PMM_ADC_BATCURR: + if (adc_calib->field2 < 7000 || + adc_calib->field2 > 12000) + goto value_check_fail; + count++; + break; + case N810BM_PMM_ADC_0xFE: + if ((s32)adc_calib->field1 > 14 || + (s32)adc_calib->field1 < -14) + goto value_check_fail; + if (adc_calib->field2 < 13000 || + adc_calib->field2 > 13350) + goto value_check_fail; + count++; + break; + case N810BM_PMM_ADC_CHGVOLT: + case N810BM_PMM_ADC_BATTEMP: + case N810BM_PMM_ADC_BKUPVOLT: + count++; + break; + case N810BM_PMM_ADC_GND2: + case N810BM_PMM_ADC_HOOKDET: + case N810BM_PMM_ADC_LIGHTSENS: + case N810BM_PMM_ADC_HEADSET: + case N810BM_PMM_ADC_LIGHTTEMP: + case N810BM_PMM_ADC_RFGP: + case N810BM_PMM_ADC_WBTX: + case N810BM_PMM_ADC_RETUTEMP: + break; + } + dev_dbg(&bm->pdev->dev, + "ADC 0x%02X calib: 0x%02X 0x%02X 0x%08X 0x%08X 0x%04X 0x%04X", + adc_calib->id, adc_calib->flags, adc_calib->adc_groupnr, + adc_calib->field1, adc_calib->field2, + adc_calib->field3, adc_calib->field4); + } + if (count != 7) { + dev_err(&bm->pdev->dev, "PMM sanity check: Did not find " + "all required values (count=%u)", count); + goto check_fail; + } + + return 0; + +value_check_fail: + dev_err(&bm->pdev->dev, "PMM image sanity check failed " + "(id=%02X, field1=%08X, field2=%08X)", + adc_calib->id, adc_calib->field1, adc_calib->field2); +check_fail: + return -EILSEQ; +} + +/* Set the current measure timer that triggers on Tahvo IRQ 7 + * An interval of zero disables the timer. */ +static void n810bm_set_current_measure_timer(struct n810bm *bm, + u16 millisec_interval) +{ + u16 value = millisec_interval; + + if (value <= 0xF905) { + value = ((u64)0x10624DD3 * (u64)(value + 0xF9)) >> 32; + value /= 16; + } else + value = 0xFF; + + tahvo_write(bm, TAHVO_REG_BATCURRTIMER, value & 0xFF); + + tahvo_set(bm, TAHVO_REG_CHGCTL, + TAHVO_REG_CHGCTL_CURTIMRST); + tahvo_clear(bm, TAHVO_REG_CHGCTL, + TAHVO_REG_CHGCTL_CURTIMRST); + + if (millisec_interval) + tahvo_enable_irq(TAHVO_INT_BATCURR); + else + tahvo_disable_irq(TAHVO_INT_BATCURR); + + //TODO also do a software timer for safety. +} + +static void n810bm_enable_current_measure(struct n810bm *bm) +{ + WARN_ON(bm->current_measure_enabled < 0); + if (!bm->current_measure_enabled) { + /* Enable the current measurement circuitry */ + tahvo_set(bm, TAHVO_REG_CHGCTL, + TAHVO_REG_CHGCTL_CURMEAS); + dev_dbg(&bm->pdev->dev, + "Current measurement circuitry enabled"); + } + bm->current_measure_enabled++; +} + +static void n810bm_disable_current_measure(struct n810bm *bm) +{ + bm->current_measure_enabled--; + WARN_ON(bm->current_measure_enabled < 0); + if (!bm->current_measure_enabled) { + /* Disable the current measurement circuitry */ + tahvo_clear(bm, TAHVO_REG_CHGCTL, + TAHVO_REG_CHGCTL_CURMEAS); + dev_dbg(&bm->pdev->dev, + "Current measurement circuitry disabled"); + } +} + +/* Measure the actual battery current. Returns a signed value in mA. + * Does only work, if current measurement was enabled. */ +static int n810bm_measure_batt_current(struct n810bm *bm) +{ + u16 retval; + int adc = 0, ma, i; + + if (WARN_ON(bm->current_measure_enabled <= 0)) + return 0; + for (i = 0; i < 3; i++) { + retval = tahvo_read(bm, TAHVO_REG_BATCURR); + adc += (s16)retval; /* Value is signed */ + } + adc /= 3; + + //TODO convert to mA + ma = adc; + + return ma; +} + +/* Requires bm->mutex locked */ +static int n810bm_measure_batt_current_async(struct n810bm *bm) +{ + int ma; + bool charging = lipocharge_is_charging(&bm->charger); + + n810bm_enable_current_measure(bm); + if (!charging) + WARN_ON(bm->active_current_pwm != 0); + tahvo_maskset(bm, TAHVO_REG_CHGCTL, + TAHVO_REG_CHGCTL_EN | + TAHVO_REG_CHGCTL_PWMOVR | + TAHVO_REG_CHGCTL_PWMOVRZERO, + TAHVO_REG_CHGCTL_EN | + TAHVO_REG_CHGCTL_PWMOVR | + (charging ? 0 : TAHVO_REG_CHGCTL_PWMOVRZERO)); + ma = n810bm_measure_batt_current(bm); + tahvo_maskset(bm, TAHVO_REG_CHGCTL, + TAHVO_REG_CHGCTL_EN | + TAHVO_REG_CHGCTL_PWMOVR | + TAHVO_REG_CHGCTL_PWMOVRZERO, + (charging ? TAHVO_REG_CHGCTL_EN : 0)); + n810bm_disable_current_measure(bm); + + return ma; +} + +static int adc_sanity_check(struct n810bm *bm, unsigned int channel) +{ + int value; + + value = retu_read_adc(&n810bm_retu_device->dev, channel); + if (value < 0) { + dev_err(&bm->pdev->dev, "Failed to read GND ADC channel %u", + channel); + return -EIO; + } + dev_dbg(&bm->pdev->dev, + "GND ADC channel %u sanity check got value: %d", + channel, value); + if (value > 5) { + n810bm_emergency(bm, "GND ADC sanity check failed"); + return -EIO; + } + + return 0; +} + +static int n810bm_check_adc_sanity(struct n810bm *bm) +{ + int err; + + /* Discard one conversion */ + retu_write(bm, RETU_REG_ADCSCR, 0); + retu_read_adc(&n810bm_retu_device->dev, RETU_ADC_GND2); + + err = adc_sanity_check(bm, RETU_ADC_GND2); + if (err) + return err; + + return 0; +} + +/* Measure the battery voltage. Returns the value in mV (or negative value on error). */ +static int n810bm_measure_batt_voltage(struct n810bm *bm) +{ + int adc; + unsigned int mv; + const unsigned int scale = 1000; + + adc = retu_adc_average(bm, RETU_ADC_BATTVOLT, 5); + if (adc < 0) + return adc; + if (adc <= 0x37) + return 2800; + mv = 2800 + ((adc - 0x37) * (((4200 - 2800) * scale) / (0x236 - 0x37))) / scale; + + //TODO compensate for power consumption + //TODO honor calibration values + + return mv; +} + +/* Measure the charger voltage. Returns the value in mV (or negative value on error). */ +static int n810bm_measure_charger_voltage(struct n810bm *bm) +{ + int adc; + unsigned int mv; + + adc = retu_adc_average(bm, RETU_ADC_CHGVOLT, 5); + if (adc < 0) + return adc; + //TODO convert to mV + mv = adc; + + return mv; +} + +/* Measure backup battery voltage. Returns the value in mV (or negative value on error). */ +static int n810bm_measure_backup_batt_voltage(struct n810bm *bm) +{ + int adc; + unsigned int mv; + + adc = retu_adc_average(bm, RETU_ADC_BKUPVOLT, 3); + if (adc < 0) + return adc; + //TODO convert to mV + mv = adc; + + return mv; +} + +/* Measure the battery temperature. Returns the value in K (or negative value on error). */ +static int n810bm_measure_batt_temp(struct n810bm *bm) +{ + int adc; + unsigned int k; + + adc = retu_adc_average(bm, RETU_ADC_BATTEMP, 3); + if (adc < 0) + return adc; + //TODO convert to K + k = adc; + + return k; +} + +/* Read the battery capacity via BSI pin. */ +static enum n810bm_capacity n810bm_read_batt_capacity(struct n810bm *bm) +{ + int adc; + const unsigned int hyst = 20; + + adc = retu_adc_average(bm, RETU_ADC_BSI, 5); + if (adc < 0) { + dev_err(&bm->pdev->dev, "Failed to read BSI ADC"); + return N810BM_CAP_UNKNOWN; + } + + if (adc >= 0x3B5 - hyst && adc <= 0x3B5 + hyst) + return N810BM_CAP_1500MAH; + + dev_err(&bm->pdev->dev, "Capacity indicator 0x%X unknown", adc); + + return N810BM_CAP_UNKNOWN; +} + +/* Convert a battery voltage (in mV) to percentage. */ +static unsigned int n810bm_mvolt2percent(unsigned int mv) +{ + const unsigned int minv = 3700; + const unsigned int maxv = 4150; + unsigned int percent; + + mv = clamp(mv, minv, maxv); + percent = (mv - minv) * 100 / (maxv - minv); + + return percent; +} + +static void n810bm_start_charge(struct n810bm *bm) +{ + int err; + + WARN_ON(!bm->battery_present); + WARN_ON(!bm->charger_present); + + /* Set PWM to zero */ + bm->active_current_pwm = 0; + tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm); + + /* Charge global enable */ + tahvo_maskset(bm, TAHVO_REG_CHGCTL, + TAHVO_REG_CHGCTL_EN | + TAHVO_REG_CHGCTL_PWMOVR | + TAHVO_REG_CHGCTL_PWMOVRZERO, + TAHVO_REG_CHGCTL_EN); + + WARN_ON((int)bm->capacity <= 0); + bm->charger.capacity = bm->capacity; + err = lipocharge_start(&bm->charger); + WARN_ON(err); + + /* Initialize current measurement circuitry */ + n810bm_enable_current_measure(bm); + n810bm_set_current_measure_timer(bm, 250); + + dev_info(&bm->pdev->dev, "Charging battery"); + n810bm_notify_charger_state(bm); + n810bm_notify_charger_pwm(bm); +} + +static void n810bm_stop_charge(struct n810bm *bm) +{ + if (lipocharge_is_charging(&bm->charger)) { + n810bm_set_current_measure_timer(bm, 0); + n810bm_disable_current_measure(bm); + } + lipocharge_stop(&bm->charger); + + /* Set PWM to zero */ + bm->active_current_pwm = 0; + tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm); + + /* Charge global disable */ + tahvo_maskset(bm, TAHVO_REG_CHGCTL, + TAHVO_REG_CHGCTL_EN | + TAHVO_REG_CHGCTL_PWMOVR | + TAHVO_REG_CHGCTL_PWMOVRZERO, + 0); + + dev_info(&bm->pdev->dev, "Not charging battery"); + n810bm_notify_charger_state(bm); + n810bm_notify_charger_pwm(bm); +} + +/* Periodic check */ +static void n810bm_periodic_check_work(struct work_struct *work) +{ + struct n810bm *bm = container_of(to_delayed_work(work), + struct n810bm, periodic_check_work); + u16 status; + bool battery_was_present, charger_was_present; + int mv; + + mutex_lock(&bm->mutex); + + status = retu_read(bm, RETU_REG_STATUS); + battery_was_present = bm->battery_present; + charger_was_present = bm->charger_present; + bm->battery_present = !!(status & RETU_REG_STATUS_BATAVAIL); + bm->charger_present = !!(status & RETU_REG_STATUS_CHGPLUG); + + if (bm->battery_present != battery_was_present) { + /* Battery state changed */ + if (bm->battery_present) { + bm->capacity = n810bm_read_batt_capacity(bm); + if (bm->capacity == N810BM_CAP_UNKNOWN) { + dev_err(&bm->pdev->dev, "Unknown battery detected"); + } else { + dev_info(&bm->pdev->dev, "Detected %u mAh battery", + (unsigned int)bm->capacity); + } + } else { + bm->capacity = N810BM_CAP_NONE; + dev_info(&bm->pdev->dev, "The main battery was removed"); + //TODO disable charging + } + } + + if (bm->charger_present != charger_was_present) { + /* Charger state changed */ + dev_info(&bm->pdev->dev, "The charger was %s", + bm->charger_present ? "plugged in" : "removed"); + n810bm_notify_charger_present(bm); + } + + if ((bm->battery_present && !bm->charger_present) || + !n810bm_known_battery_present(bm)){ + /* We're draining the battery */ + mv = n810bm_measure_batt_voltage(bm); + if (mv < 0) { + n810bm_emergency(bm, + "check: Failed to measure voltage"); + } + if (mv < N810BM_MIN_VOLTAGE_THRES) { + n810bm_emergency(bm, + "check: Minimum voltage threshold reached"); + } + } + + if (bm->charger_present && n810bm_known_battery_present(bm)) { + /* Known battery and charger are connected */ + if (bm->charger_enabled) { + /* Charger is enabled */ + if (!lipocharge_is_charging(&bm->charger)) { + //TODO start charging, if battery is below some threshold + n810bm_start_charge(bm); + } + } + } + + if (lipocharge_is_charging(&bm->charger) && !bm->charger_present) { + /* Charger was unplugged. */ + n810bm_stop_charge(bm); + } + + mutex_unlock(&bm->mutex); + schedule_delayed_work(&bm->periodic_check_work, + round_jiffies_relative(N810BM_CHECK_INTERVAL)); +} + +/*XXX +static void n810bm_adc_irq_handler(unsigned long data) +{ + struct n810bm *bm = (struct n810bm *)data; + + retu_ack_irq(RETU_INT_ADCS); + //TODO +dev_info(&bm->pdev->dev, "ADC interrupt triggered\n"); +} +*/ + +static void n810bm_tahvo_current_measure_work(struct work_struct *work) +{ + struct n810bm *bm = container_of(work, struct n810bm, currmeas_irq_work); + int res, ma, mv, temp; + + mutex_lock(&bm->mutex); + if (!lipocharge_is_charging(&bm->charger)) + goto out_unlock; + + tahvo_maskset(bm, TAHVO_REG_CHGCTL, + TAHVO_REG_CHGCTL_PWMOVR | + TAHVO_REG_CHGCTL_PWMOVRZERO, + TAHVO_REG_CHGCTL_PWMOVR); + ma = n810bm_measure_batt_current(bm); + tahvo_maskset(bm, TAHVO_REG_CHGCTL, + TAHVO_REG_CHGCTL_PWMOVR | + TAHVO_REG_CHGCTL_PWMOVRZERO, + TAHVO_REG_CHGCTL_PWMOVR | + TAHVO_REG_CHGCTL_PWMOVRZERO); + msleep(10); + mv = n810bm_measure_batt_voltage(bm); + tahvo_maskset(bm, TAHVO_REG_CHGCTL, + TAHVO_REG_CHGCTL_PWMOVR | + TAHVO_REG_CHGCTL_PWMOVRZERO, + 0); + temp = n810bm_measure_batt_temp(bm); + if (WARN_ON(mv < 0)) + goto out_unlock; + if (WARN_ON(temp < 0)) + goto out_unlock; + + if (bm->verbose_charge_log) { + dev_info(&bm->pdev->dev, + "Battery charge state: %d mV, %d mA (%s)", + mv, ma, + (ma <= 0) ? "discharging" : "charging"); + } + res = lipocharge_update_state(&bm->charger, mv, ma, temp); + if (res) { + if (res > 0) + dev_info(&bm->pdev->dev, "Battery fully charged"); + n810bm_stop_charge(bm); + } +out_unlock: + mutex_unlock(&bm->mutex); +} + +static void n810bm_tahvo_current_measure_irq_handler(unsigned long data) +{ + struct n810bm *bm = (struct n810bm *)data; + + tahvo_ack_irq(TAHVO_INT_BATCURR); + schedule_work(&bm->currmeas_irq_work); +} + +#define DEFINE_ATTR_NOTIFY(attr_name) \ + void n810bm_notify_##attr_name(struct n810bm *bm) \ + { \ + set_bit(N810BM_NOTIFY_##attr_name, &bm->notify_flags); \ + wmb(); \ + schedule_work(&bm->notify_work); \ + } + +#define DEFINE_SHOW_INT_FUNC(name, member) \ + static ssize_t n810bm_attr_##name##_show(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ + { \ + struct n810bm *bm = device_to_n810bm(dev); \ + ssize_t count; \ + \ + mutex_lock(&bm->mutex); \ + count = snprintf(buf, PAGE_SIZE, "%d\n", (int)(bm->member)); \ + mutex_unlock(&bm->mutex); \ + \ + return count; \ + } + +#define DEFINE_STORE_INT_FUNC(name, member) \ + static ssize_t n810bm_attr_##name##_store(struct device *dev, \ + struct device_attribute *attr,\ + const char *buf, size_t count)\ + { \ + struct n810bm *bm = device_to_n810bm(dev); \ + long val; \ + int err; \ + \ + mutex_lock(&bm->mutex); \ + err = strict_strtol(buf, 0, &val); \ + if (!err) \ + bm->member = (typeof(bm->member))val; \ + mutex_unlock(&bm->mutex); \ + \ + return err ? err : count; \ + } + +#define DEFINE_ATTR_SHOW_INT(name, member) \ + DEFINE_SHOW_INT_FUNC(name, member) \ + static DEVICE_ATTR(name, S_IRUGO, \ + n810bm_attr_##name##_show, NULL); + +#define DEFINE_ATTR_SHOW_STORE_INT(name, member) \ + DEFINE_SHOW_INT_FUNC(name, member) \ + DEFINE_STORE_INT_FUNC(name, member) \ + static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, \ + n810bm_attr_##name##_show, \ + n810bm_attr_##name##_store); + +DEFINE_ATTR_SHOW_INT(battery_present, battery_present); +DEFINE_ATTR_SHOW_INT(charger_present, charger_present); +static DEFINE_ATTR_NOTIFY(charger_present); +DEFINE_ATTR_SHOW_INT(charger_state, charger.state); +static DEFINE_ATTR_NOTIFY(charger_state); +DEFINE_ATTR_SHOW_INT(charger_pwm, active_current_pwm); +static DEFINE_ATTR_NOTIFY(charger_pwm); +DEFINE_ATTR_SHOW_STORE_INT(charger_enable, charger_enabled); +DEFINE_ATTR_SHOW_STORE_INT(charger_verbose, verbose_charge_log); + +static ssize_t n810bm_attr_battery_level_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct n810bm *bm = device_to_n810bm(dev); + ssize_t count = -ENODEV; + int millivolt; + + mutex_lock(&bm->mutex); + if (!bm->battery_present || lipocharge_is_charging(&bm->charger)) + millivolt = 0; + else + millivolt = n810bm_measure_batt_voltage(bm); + if (millivolt >= 0) { + count = snprintf(buf, PAGE_SIZE, "%u\n", + n810bm_mvolt2percent(millivolt)); + } + mutex_unlock(&bm->mutex); + + return count; +} +static DEVICE_ATTR(battery_level, S_IRUGO, + n810bm_attr_battery_level_show, NULL); + +static ssize_t n810bm_attr_battery_capacity_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct n810bm *bm = device_to_n810bm(dev); + ssize_t count; + int capacity = 0; + + mutex_lock(&bm->mutex); + if (n810bm_known_battery_present(bm)) + capacity = (int)bm->capacity; + count = snprintf(buf, PAGE_SIZE, "%d\n", capacity); + mutex_unlock(&bm->mutex); + + return count; +} +static DEVICE_ATTR(battery_capacity, S_IRUGO, + n810bm_attr_battery_capacity_show, NULL); + +static ssize_t n810bm_attr_battery_temp_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct n810bm *bm = device_to_n810bm(dev); + ssize_t count = -ENODEV; + int k; + + mutex_lock(&bm->mutex); + k = n810bm_measure_batt_temp(bm); + if (k >= 0) + count = snprintf(buf, PAGE_SIZE, "%d\n", k); + mutex_unlock(&bm->mutex); + + return count; +} +static DEVICE_ATTR(battery_temp, S_IRUGO, + n810bm_attr_battery_temp_show, NULL); + +static ssize_t n810bm_attr_charger_voltage_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct n810bm *bm = device_to_n810bm(dev); + ssize_t count = -ENODEV; + int mv = 0; + + mutex_lock(&bm->mutex); + if (bm->charger_present) + mv = n810bm_measure_charger_voltage(bm); + if (mv >= 0) + count = snprintf(buf, PAGE_SIZE, "%d\n", mv); + mutex_unlock(&bm->mutex); + + return count; +} +static DEVICE_ATTR(charger_voltage, S_IRUGO, + n810bm_attr_charger_voltage_show, NULL); + +static ssize_t n810bm_attr_backup_battery_voltage_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct n810bm *bm = device_to_n810bm(dev); + ssize_t count = -ENODEV; + int mv; + + mutex_lock(&bm->mutex); + mv = n810bm_measure_backup_batt_voltage(bm); + if (mv >= 0) + count = snprintf(buf, PAGE_SIZE, "%d\n", mv); + mutex_unlock(&bm->mutex); + + return count; +} +static DEVICE_ATTR(backup_battery_voltage, S_IRUGO, + n810bm_attr_backup_battery_voltage_show, NULL); + +static ssize_t n810bm_attr_battery_current_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct n810bm *bm = device_to_n810bm(dev); + ssize_t count = -ENODEV; + int ma = 0; + + mutex_lock(&bm->mutex); + if (bm->battery_present) + ma = n810bm_measure_batt_current_async(bm); + count = snprintf(buf, PAGE_SIZE, "%d\n", ma); + mutex_unlock(&bm->mutex); + + return count; +} +static DEVICE_ATTR(battery_current, S_IRUGO, + n810bm_attr_battery_current_show, NULL); + +static const struct device_attribute *n810bm_attrs[] = { + &dev_attr_battery_present, + &dev_attr_battery_level, + &dev_attr_battery_current, + &dev_attr_battery_capacity, + &dev_attr_battery_temp, + &dev_attr_backup_battery_voltage, + &dev_attr_charger_present, + &dev_attr_charger_state, + &dev_attr_charger_verbose, + &dev_attr_charger_voltage, + &dev_attr_charger_enable, + &dev_attr_charger_pwm, +}; + +static void n810bm_notify_work(struct work_struct *work) +{ + struct n810bm *bm = container_of(work, struct n810bm, notify_work); + unsigned long notify_flags; + + notify_flags = xchg(&bm->notify_flags, 0); + mb(); + +#define do_notify(attr_name) \ + do { \ + if (notify_flags & (1 << N810BM_NOTIFY_##attr_name)) { \ + sysfs_notify(&bm->pdev->dev.kobj, NULL, \ + dev_attr_##attr_name.attr.name); \ + } \ + } while (0) + + do_notify(charger_present); + do_notify(charger_state); + do_notify(charger_pwm); +} + +static int n810bm_charger_set_current_pwm(struct lipocharge *c, + unsigned int duty_cycle) +{ + struct n810bm *bm = container_of(c, struct n810bm, charger); + int err = -EINVAL; + + WARN_ON(!mutex_is_locked(&bm->mutex)); + if (WARN_ON(duty_cycle > 0xFF)) + goto out; + if (WARN_ON(!bm->charger_enabled)) + goto out; + if (WARN_ON(!bm->battery_present || !bm->charger_present)) + goto out; + + if (duty_cycle != bm->active_current_pwm) { + bm->active_current_pwm = duty_cycle; + tahvo_write(bm, TAHVO_REG_CHGCURR, duty_cycle); + n810bm_notify_charger_pwm(bm); + } + + err = 0; +out: + + return err; +} + +static void n810bm_charger_emergency(struct lipocharge *c) +{ + struct n810bm *bm = container_of(c, struct n810bm, charger); + + n810bm_emergency(bm, "Battery charger fault"); +} + +static void n810bm_hw_exit(struct n810bm *bm) +{ + n810bm_stop_charge(bm); + retu_write(bm, RETU_REG_ADCSCR, 0); +} + +static int n810bm_hw_init(struct n810bm *bm) +{ + int err; + + err = n810bm_check_adc_sanity(bm); + if (err) + return err; + + n810bm_stop_charge(bm); + + return 0; +} + +static void n810bm_cancel_and_flush_work(struct n810bm *bm) +{ + cancel_delayed_work_sync(&bm->periodic_check_work); + cancel_work_sync(&bm->notify_work); + cancel_work_sync(&bm->currmeas_irq_work); + flush_scheduled_work(); +} + +static int n810bm_device_init(struct n810bm *bm) +{ + int attr_index; + int err; + + bm->charger.rate = LIPORATE_p6C; + bm->charger.top_voltage = 4100; + bm->charger.duty_cycle_max = 0xFF; + bm->charger.set_current_pwm = n810bm_charger_set_current_pwm; + bm->charger.emergency = n810bm_charger_emergency; + lipocharge_init(&bm->charger, &bm->pdev->dev); + + err = n810bm_hw_init(bm); + if (err) + goto error; + for (attr_index = 0; attr_index < ARRAY_SIZE(n810bm_attrs); attr_index++) { + err = device_create_file(&bm->pdev->dev, n810bm_attrs[attr_index]); + if (err) + goto err_unwind_attrs; + } +/*XXX + err = retu_request_irq(RETU_INT_ADCS, + n810bm_adc_irq_handler, + (unsigned long)bm, "n810bm"); + if (err) + goto err_unwind_attrs; +*/ + err = tahvo_request_irq(TAHVO_INT_BATCURR, + n810bm_tahvo_current_measure_irq_handler, + (unsigned long)bm, "n810bm"); + if (err) + goto err_free_retu_irq; + tahvo_disable_irq(TAHVO_INT_BATCURR); + + schedule_delayed_work(&bm->periodic_check_work, + round_jiffies_relative(N810BM_CHECK_INTERVAL)); + + bm->initialized = 1; + dev_info(&bm->pdev->dev, "Battery management initialized"); + + return 0; + +err_free_retu_irq: +//XXX retu_free_irq(RETU_INT_ADCS); +err_unwind_attrs: + for (attr_index--; attr_index >= 0; attr_index--) + device_remove_file(&bm->pdev->dev, n810bm_attrs[attr_index]); +/*err_exit:*/ + n810bm_hw_exit(bm); +error: + n810bm_cancel_and_flush_work(bm); + + return err; +} + +static void n810bm_device_exit(struct n810bm *bm) +{ + int i; + + if (!bm->initialized) + return; + + lipocharge_exit(&bm->charger); + tahvo_free_irq(TAHVO_INT_BATCURR); +//XXX retu_free_irq(RETU_INT_ADCS); + for (i = 0; i < ARRAY_SIZE(n810bm_attrs); i++) + device_remove_file(&bm->pdev->dev, n810bm_attrs[i]); + + n810bm_cancel_and_flush_work(bm); + + n810bm_hw_exit(bm); + + bm->initialized = 0; +} + +static void n810bm_pmm_block_found(const struct firmware *fw, void *context) +{ + struct n810bm *bm = context; + int err; + + if (!fw) { + dev_err(&bm->pdev->dev, + "CAL PMM block image file not found"); + goto err_release; + } + if (fw->size != N810BM_PMM_BLOCK_SIZE || + memcmp(fw->data, "BME-PMM-BLOCK01", 15) != 0) { + dev_err(&bm->pdev->dev, + "CAL PMM block image file has an invalid format"); + goto err_release; + } + + err = n810bm_parse_pmm_block(bm, fw); + if (err) + goto err_release; + release_firmware(fw); + + err = n810bm_device_init(bm); + if (err) { + dev_err(&bm->pdev->dev, + "Failed to initialized battery management (%d)", err); + goto error; + } + + return; +err_release: + release_firmware(fw); +error: + return; +} + +static int __devinit n810bm_probe(void) +{ + struct n810bm *bm; + int err; + + if (!n810bm_retu_device || !n810bm_tahvo_device) + return 0; + + bm = kzalloc(sizeof(*bm), GFP_KERNEL); + if (!bm) + return -ENOMEM; + bm->pdev = n810bm_retu_device; + platform_set_drvdata(n810bm_retu_device, bm); + platform_set_drvdata(n810bm_tahvo_device, bm); + mutex_init(&bm->mutex); + INIT_DELAYED_WORK(&bm->periodic_check_work, n810bm_periodic_check_work); + INIT_WORK(&bm->notify_work, n810bm_notify_work); + INIT_WORK(&bm->currmeas_irq_work, n810bm_tahvo_current_measure_work); + + dev_info(&bm->pdev->dev, "Requesting CAL BME PMM block firmware file " + N810BM_PMM_BLOCK_FILENAME); + err = request_firmware_nowait(THIS_MODULE, 1, + N810BM_PMM_BLOCK_FILENAME, + &bm->pdev->dev, GFP_KERNEL, + bm, n810bm_pmm_block_found); + if (err) { + dev_err(&bm->pdev->dev, + "Failed to request CAL PMM block image file (%d)", err); + goto err_free; + } + + return 0; + +err_free: + kfree(bm); + + return err; +} + +static void __devexit n810bm_remove(void) +{ + struct n810bm *bm; + + if (!n810bm_retu_device || !n810bm_tahvo_device) + return; + bm = platform_get_drvdata(n810bm_retu_device); + + n810bm_device_exit(bm); + + kfree(bm); + platform_set_drvdata(n810bm_retu_device, NULL); + platform_set_drvdata(n810bm_tahvo_device, NULL); +} + +static int __devinit n810bm_retu_probe(struct platform_device *pdev) +{ + n810bm_retu_device = pdev; + return n810bm_probe(); +} + +static int __devexit n810bm_retu_remove(struct platform_device *pdev) +{ + n810bm_remove(); + n810bm_retu_device = NULL; + return 0; +} + +static int __devinit n810bm_tahvo_probe(struct platform_device *pdev) +{ + n810bm_tahvo_device = pdev; + return n810bm_probe(); +} + +static int __devexit n810bm_tahvo_remove(struct platform_device *pdev) +{ + n810bm_remove(); + n810bm_tahvo_device = NULL; + return 0; +} + +static struct platform_driver n810bm_retu_driver = { + .remove = __devexit_p(n810bm_retu_remove), + .driver = { + .name = "retu-n810bm", + } +}; + +static struct platform_driver n810bm_tahvo_driver = { + .remove = __devexit_p(n810bm_tahvo_remove), + .driver = { + .name = "tahvo-n810bm", + } +}; + +/* FIXME: for now alloc the device here... */ +static struct platform_device n810bm_tahvo_dev = { + .name = "tahvo-n810bm", + .id = -1, +}; + +static int __init n810bm_modinit(void) +{ + int err; + + //FIXME + err = platform_device_register(&n810bm_tahvo_dev); + if (err) + return err; + + err = platform_driver_probe(&n810bm_retu_driver, n810bm_retu_probe); + if (err) + return err; + err = platform_driver_probe(&n810bm_tahvo_driver, n810bm_tahvo_probe); + if (err) { + platform_driver_unregister(&n810bm_retu_driver); + return err; + } + + return 0; +} +module_init(n810bm_modinit); + +static void __exit n810bm_modexit(void) +{ + //FIXME + platform_device_unregister(&n810bm_tahvo_dev); + + platform_driver_unregister(&n810bm_tahvo_driver); + platform_driver_unregister(&n810bm_retu_driver); +} +module_exit(n810bm_modexit); + +MODULE_DESCRIPTION("Nokia n810 battery management"); +MODULE_FIRMWARE(N810BM_PMM_BLOCK_FILENAME); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Buesch"); Index: linux-2.6.38-rc6/drivers/cbus/lipocharge.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.38-rc6/drivers/cbus/lipocharge.c 2011-03-01 19:56:10.672365533 +0100 @@ -0,0 +1,183 @@ +/* + * Generic LIPO battery charger + * + * Copyright (c) 2010-2011 Michael Buesch + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define DEBUG + +#include "lipocharge.h" + +#include + + +/* Hysteresis constants */ +#define CURRENT_HYST 30 /* mA */ +#define VOLTAGE_HYST 10 /* mV */ + +/* Threshold constants */ +#define FINISH_CURRENT_PERCENT 3 + + +/* Returns the requested first-stage charge current in mA */ +static inline unsigned int get_stage1_charge_current(struct lipocharge *c) +{ + /* current = (capacity * C) */ + return c->capacity * c->rate / 1000; +} + +void lipocharge_init(struct lipocharge *c, struct device *dev) +{ + c->dev = dev; + c->state = LIPO_IDLE; +} + +void lipocharge_exit(struct lipocharge *c) +{ + c->state = LIPO_IDLE; +} + +int lipocharge_start(struct lipocharge *c) +{ + int err; + + if (c->state != LIPO_IDLE) + return -EBUSY; + if (!c->set_current_pwm || !c->emergency) + return -EINVAL; + if (!c->top_voltage || c->top_voltage > 4200) + return -EINVAL; + + c->active_duty_cycle = 0; + err = c->set_current_pwm(c, c->active_duty_cycle); + if (err) + return err; + c->state = LIPO_FIRST_STAGE; + + return 0; +} + +void lipocharge_stop(struct lipocharge *c) +{ + if (c->state == LIPO_IDLE) + return; + c->state = LIPO_IDLE; +} + +static int lipocharge_increase_current(struct lipocharge *c, + unsigned int inc_permille) +{ + int old_pwm, new_pwm; + + if (c->active_duty_cycle >= c->duty_cycle_max) + return 0; + + old_pwm = c->active_duty_cycle; + new_pwm = old_pwm + (c->duty_cycle_max * inc_permille / 1000); + new_pwm = min(new_pwm, (int)c->duty_cycle_max); + c->active_duty_cycle = new_pwm; + + dev_dbg(c->dev, "lipo: Increasing duty_cycle by " + "%u permille (0x%02X -> 0x%02X)", + inc_permille, old_pwm, new_pwm); + + return c->set_current_pwm(c, c->active_duty_cycle); +} + +static int lipocharge_decrease_current(struct lipocharge *c, + unsigned int dec_permille) +{ + int old_pwm, new_pwm; + + if (c->active_duty_cycle <= 0) + return 0; + + old_pwm = c->active_duty_cycle; + new_pwm = old_pwm - (c->duty_cycle_max * dec_permille / 1000); + new_pwm = max(0, new_pwm); + c->active_duty_cycle = new_pwm; + + dev_dbg(c->dev, "lipo: Decreasing duty_cycle by " + "%u permille (0x%02X -> 0x%02X)", + dec_permille, old_pwm, new_pwm); + + return c->set_current_pwm(c, c->active_duty_cycle); +} + +/** lipocharge_update_state - Update the charge state + * @c: The context. + * @voltage_mV: The measured battery voltage. + * @current_mA: The measured charge current. + * negative -> drain. + * positive -> charge. + * @temp_K: Battery temperature in K. + * + * Returns 0 on success, -1 on error. + * Returns 1, if the charging process is finished. + */ +int lipocharge_update_state(struct lipocharge *c, + unsigned int voltage_mV, + int current_mA, + unsigned int temp_K) +{ + int requested_current, current_diff; + int err; + unsigned int permille; + + //TODO temp + +restart: + switch (c->state) { + case LIPO_IDLE: + dev_err(c->dev, "%s: called while idle", __func__); + return -EINVAL; + case LIPO_FIRST_STAGE: /* Constant current */ +//printk("GOT %u %d %u\n", voltage_mV, current_mA, temp_K); + if (voltage_mV >= c->top_voltage) { + /* Float voltage reached. + * Switch charger mode to "constant current" */ + c->state = LIPO_SECOND_STAGE; + dev_dbg(c->dev, "Switched to second charging stage."); + goto restart; + } + /* Float voltage not reached, yet. + * Try to get the requested constant current. */ + requested_current = get_stage1_charge_current(c); + if (current_mA < 0) + current_mA = 0; + current_diff = requested_current - current_mA; + if (abs(requested_current - current_mA) > CURRENT_HYST) { + if (current_diff > 0) { + /* Increase current */ + permille = current_diff * 1000 / requested_current; + permille /= 2; + err = lipocharge_increase_current(c, permille); + if (err) + return err; + } else { + /* Decrease current */ + permille = (-current_diff) * 1000 / requested_current; + permille /= 2; + err = lipocharge_decrease_current(c, permille); + if (err) + return err; + } + } + break; + case LIPO_SECOND_STAGE: /* Constant voltage */ + //TODO + break; + } + + return 0; +} Index: linux-2.6.38-rc6/drivers/cbus/lipocharge.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.38-rc6/drivers/cbus/lipocharge.h 2011-03-01 21:07:15.483394264 +0100 @@ -0,0 +1,60 @@ +#ifndef LIPOCHARGE_H_ +#define LIPOCHARGE_H_ + +#include +#include + + +#define LIPORATE(a,b) (((a) * 1000) + ((b) * 100)) +#define LIPORATE_p6C LIPORATE(0,6) /* 0.6C */ + +enum lipocharge_state { + LIPO_IDLE = 0, /* Not charging */ + LIPO_FIRST_STAGE, /* Charging: constant current */ + LIPO_SECOND_STAGE, /* Charging: constant voltage */ +}; + +/** struct lipocharge - A generic LIPO charger + * + * @capacity: Battery capacity in mAh. + * @rate: Charge rate. + * @top_voltage: Fully charged voltage, in mV. + * @duty_cycle_max: Max value for duty_cycle. + * + * @set_charge_current: Set the charge current PWM duty cycle. + * @emergency: Something went wrong. Force shutdown. + */ +struct lipocharge { + unsigned int capacity; + unsigned int rate; + unsigned int top_voltage; + unsigned int duty_cycle_max; + + int (*set_current_pwm)(struct lipocharge *c, unsigned int duty_cycle); + void (*emergency)(struct lipocharge *c); + + /* internal */ + struct device *dev; + enum lipocharge_state state; + unsigned int active_duty_cycle; + + //TODO implement timer to cut power after maximum charge time. +}; + +void lipocharge_init(struct lipocharge *c, struct device *dev); +void lipocharge_exit(struct lipocharge *c); + +int lipocharge_start(struct lipocharge *c); +void lipocharge_stop(struct lipocharge *c); + +int lipocharge_update_state(struct lipocharge *c, + unsigned int voltage_mV, + int current_mA, + unsigned int temp_K); + +static inline bool lipocharge_is_charging(struct lipocharge *c) +{ + return (c->state != LIPO_IDLE); +} + +#endif /* LIPOCHARGE_H_ */ Index: linux-2.6.38-rc6/drivers/cbus/cbus.c =================================================================== --- linux-2.6.38-rc6.orig/drivers/cbus/cbus.c 2011-03-01 19:56:10.396378152 +0100 +++ linux-2.6.38-rc6/drivers/cbus/cbus.c 2011-03-01 19:56:10.673365487 +0100 @@ -35,6 +35,7 @@ #include #include +#include #include "cbus.h" @@ -323,6 +324,13 @@ static void __exit cbus_bus_exit(void) } module_exit(cbus_bus_exit); +void cbus_emergency(void) +{ + machine_power_off(); + panic("cbus: Failed to halt machine in emergency state\n"); +} +EXPORT_SYMBOL(cbus_emergency); + MODULE_DESCRIPTION("CBUS serial protocol"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Juha Yrjölä"); Index: linux-2.6.38-rc6/drivers/cbus/cbus.h =================================================================== --- linux-2.6.38-rc6.orig/drivers/cbus/cbus.h 2011-03-01 19:56:10.396378152 +0100 +++ linux-2.6.38-rc6/drivers/cbus/cbus.h 2011-03-01 19:56:10.673365487 +0100 @@ -26,4 +26,6 @@ extern int cbus_read_reg(unsigned dev, unsigned reg); extern int cbus_write_reg(unsigned dev, unsigned reg, unsigned val); +NORET_TYPE void cbus_emergency(void) ATTRIB_NORET; + #endif /* __DRIVERS_CBUS_CBUS_H */ Index: linux-2.6.38-rc6/drivers/cbus/retu.c =================================================================== --- linux-2.6.38-rc6.orig/drivers/cbus/retu.c 2011-03-01 19:56:10.469374814 +0100 +++ linux-2.6.38-rc6/drivers/cbus/retu.c 2011-03-01 19:56:10.674365441 +0100 @@ -425,6 +425,11 @@ static int retu_allocate_children(struct if (!child) return -ENOMEM; + child = retu_allocate_child("retu-n810bm", parent, irq_base, + RETU_INT_ADCS, -1, 1); + if (!child) + return -ENOMEM; + return 0; } Index: linux-2.6.38-rc6/drivers/cbus/tahvo.c =================================================================== --- linux-2.6.38-rc6.orig/drivers/cbus/tahvo.c 2011-03-01 19:56:10.401377922 +0100 +++ linux-2.6.38-rc6/drivers/cbus/tahvo.c 2011-03-01 19:56:10.674365441 +0100 @@ -54,6 +54,7 @@ static int tahvo_is_betty; static struct tasklet_struct tahvo_tasklet; spinlock_t tahvo_lock = SPIN_LOCK_UNLOCKED; +EXPORT_SYMBOL(tahvo_lock); struct tahvo_irq_handler_desc { int (*func)(unsigned long); @@ -115,6 +116,7 @@ void tahvo_set_clear_reg_bits(unsigned r tahvo_write_reg(reg, w); spin_unlock_irqrestore(&tahvo_lock, flags); } +EXPORT_SYMBOL(tahvo_set_clear_reg_bits); /* * Disable given TAHVO interrupt