From 6437f41dfdf9475178e22ab0dd886af033f90cc2 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 29 Sep 2011 21:10:16 +0200 Subject: [PATCH 11/24] MIPS: lantiq: adds falcon I2C --- arch/mips/lantiq/falcon/devices.c | 21 + arch/mips/lantiq/falcon/devices.h | 1 + drivers/i2c/busses/Kconfig | 4 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-falcon.c | 815 +++++++++++++++++++++++++++++++++++++ 5 files changed, 842 insertions(+), 0 deletions(-) create mode 100644 drivers/i2c/busses/i2c-falcon.c --- a/arch/mips/lantiq/falcon/devices.c +++ b/arch/mips/lantiq/falcon/devices.c @@ -126,3 +126,24 @@ falcon_register_gpio_extra(void) ltq_sysctl_activate(SYSCTL_SYS1, ACTS_PADCTRL3 | ACTS_PADCTRL4 | ACTS_P3 | ACTS_P4); } + +/* i2c */ +static struct resource falcon_i2c_resources[] = { + MEM_RES("i2c", GPON_I2C_BASE,GPON_I2C_END), + IRQ_RES("i2c_lb", FALCON_IRQ_I2C_LBREQ), + IRQ_RES("i2c_b", FALCON_IRQ_I2C_BREQ), + IRQ_RES("i2c_err", FALCON_IRQ_I2C_I2C_ERR), + IRQ_RES("i2c_p", FALCON_IRQ_I2C_I2C_P), +}; + +void __init falcon_register_i2c(void) +{ + platform_device_register_simple("i2c-falcon", 0, + falcon_i2c_resources, ARRAY_SIZE(falcon_i2c_resources)); + sys1_hw_activate(ACTS_I2C_ACT); +} + +void __init falcon_register_crypto(void) +{ + platform_device_register_simple("ltq_falcon_deu", 0, NULL, 0); +} --- a/arch/mips/lantiq/falcon/devices.h +++ b/arch/mips/lantiq/falcon/devices.h @@ -16,5 +16,6 @@ extern void falcon_register_nand(void); extern void falcon_register_gpio(void); extern void falcon_register_gpio_extra(void); +extern void falcon_register_i2c(void); #endif --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -284,6 +284,10 @@ config I2C_POWERMAC comment "I2C system bus drivers (mostly embedded / system-on-chip)" +config I2C_FALCON + tristate "Falcon I2C interface" +# depends on SOC_FALCON + config I2C_AT91 tristate "Atmel AT91 I2C Two-Wire interface (TWI)" depends on ARCH_AT91 && EXPERIMENTAL && BROKEN --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -82,5 +82,6 @@ obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o obj-$(CONFIG_I2C_STUB) += i2c-stub.o obj-$(CONFIG_SCx200_ACB) += scx200_acb.o obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o +obj-$(CONFIG_I2C_FALCON) += i2c-falcon.o ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG --- /dev/null +++ b/drivers/i2c/busses/i2c-falcon.c @@ -0,0 +1,815 @@ +/* + * Lantiq FALC(tm) ON - I2C bus adapter + * + * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* #define DEBUG */ + +#include +#include +#include +#include /* for kzalloc, kfree */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* CURRENT ISSUES: + * - no high speed support + * - supports only master mode + * - ten bit mode is not tested (no slave devices) + */ + +/* mapping for access macros */ +#define reg_r32(reg) __raw_readl(reg) +#define reg_w32(val, reg) __raw_writel(val, reg) +#define reg_w32_mask(clear, set, reg) \ + reg_w32((reg_r32(reg) & ~(clear)) | (set), reg) +#define reg_r32_table(reg, idx) reg_r32(&((uint32_t *)®)[idx]) +#define reg_w32_table(val, reg, idx) reg_w32(val, &((uint32_t *)®)[idx]) +#define i2c (priv->membase) +#include + +#define DRV_NAME "i2c-falcon" +#define DRV_VERSION "1.01" + +#define FALCON_I2C_BUSY_TIMEOUT 20 /* ms */ + +#ifdef DEBUG +#define FALCON_I2C_XFER_TIMEOUT 25*HZ +#else +#define FALCON_I2C_XFER_TIMEOUT HZ +#endif +#if defined(DEBUG) && 0 +#define PRINTK(arg...) printk(arg) +#else +#define PRINTK(arg...) do {} while (0) +#endif + +#define FALCON_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \ + I2C_IMSC_I2C_ERR_INT_EN) + +#define FALCON_I2C_ARB_LOST (1 << 0) +#define FALCON_I2C_NACK (1 << 1) +#define FALCON_I2C_RX_UFL (1 << 2) +#define FALCON_I2C_RX_OFL (1 << 3) +#define FALCON_I2C_TX_UFL (1 << 4) +#define FALCON_I2C_TX_OFL (1 << 5) + +struct falcon_i2c { + struct mutex mutex; + + enum { + FALCON_I2C_MODE_100 = 1, + FALCON_I2C_MODE_400 = 2, + FALCON_I2C_MODE_3400 = 3 + } mode; /* current speed mode */ + + struct clk *clk; /* clock input for i2c hardware block */ + struct gpon_reg_i2c __iomem *membase; /* base of mapped registers */ + int irq_lb, irq_b, irq_err, irq_p; /* last burst, burst, error, + protocol IRQs */ + + struct i2c_adapter adap; + struct device *dev; + + struct completion cmd_complete; + + /* message transfer data */ + /* current message */ + struct i2c_msg *current_msg; + /* number of messages to handle */ + int msgs_num; + /* current buffer */ + u8 *msg_buf; + /* remaining length of current buffer */ + u32 msg_buf_len; + /* error status of the current transfer */ + int msg_err; + + /* master status codes */ + enum { + STATUS_IDLE, + STATUS_ADDR, /* address phase */ + STATUS_WRITE, + STATUS_READ, + STATUS_READ_END, + STATUS_STOP + } status; +}; + +static irqreturn_t falcon_i2c_isr(int irq, void *dev_id); + +static inline void enable_burst_irq(struct falcon_i2c *priv) +{ + i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc); +} +static inline void disable_burst_irq(struct falcon_i2c *priv) +{ + i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc); +} + +static void prepare_msg_send_addr(struct falcon_i2c *priv) +{ + struct i2c_msg *msg = priv->current_msg; + int rd = !!(msg->flags & I2C_M_RD); /* extends to 0 or 1 */ + u16 addr = msg->addr; + + /* new i2c_msg */ + priv->msg_buf = msg->buf; + priv->msg_buf_len = msg->len; + if (rd) + priv->status = STATUS_READ; + else + priv->status = STATUS_WRITE; + + /* send slave address */ + if (msg->flags & I2C_M_TEN) { + i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd); + i2c_w32(addr & 0xff, txd); + } else + i2c_w32((addr & 0x7f) << 1 | rd, txd); +} + +static void set_tx_len(struct falcon_i2c *priv) +{ + struct i2c_msg *msg = priv->current_msg; + int len = (msg->flags & I2C_M_TEN) ? 2 : 1; + + PRINTK("set_tx_len %cX\n", (msg->flags & I2C_M_RD)?'R':'T'); + + priv->status = STATUS_ADDR; + + if (!(msg->flags & I2C_M_RD)) { + len += msg->len; + } else { + /* set maximum received packet size (before rx int!) */ + i2c_w32(msg->len, mrps_ctrl); + } + i2c_w32(len, tps_ctrl); + enable_burst_irq(priv); +} + +static int falcon_i2c_hw_init(struct i2c_adapter *adap) +{ + struct falcon_i2c *priv = i2c_get_adapdata(adap); + + /* disable bus */ + i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); + +#ifndef DEBUG + /* set normal operation clock divider */ + i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc); +#else + /* for debugging a higher divider value! */ + i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc); +#endif + + /* set frequency */ + if (priv->mode == FALCON_I2C_MODE_100) { + dev_dbg(priv->dev, "set standard mode (100 kHz)\n"); + i2c_w32(0, fdiv_high_cfg); + i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) | + (499 << I2C_FDIV_CFG_DEC_OFFSET), + fdiv_cfg); + } else if (priv->mode == FALCON_I2C_MODE_400) { + dev_dbg(priv->dev, "set fast mode (400 kHz)\n"); + i2c_w32(0, fdiv_high_cfg); + i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) | + (124 << I2C_FDIV_CFG_DEC_OFFSET), + fdiv_cfg); + } else if (priv->mode == FALCON_I2C_MODE_3400) { + dev_dbg(priv->dev, "set high mode (3.4 MHz)\n"); + i2c_w32(0, fdiv_cfg); + /* TODO recalculate value for 100MHz input */ + i2c_w32((41 << I2C_FDIV_HIGH_CFG_INC_OFFSET) | + (152 << I2C_FDIV_HIGH_CFG_DEC_OFFSET), + fdiv_high_cfg); + } else { + dev_warn(priv->dev, "unknown mode\n"); + return -ENODEV; + } + + /* configure fifo */ + i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */ + I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */ + I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */ + I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */ + I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */ + I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */ + fifo_cfg); + + /* configure address */ + i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data in the + fifo */ + I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */ + I2C_ADDR_CFG_MnS_EN | /* we are master device */ + 0, /* our slave address (not used!) */ + addr_cfg); + + /* enable bus */ + i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl); + + return 0; +} + +static int falcon_i2c_wait_bus_not_busy(struct falcon_i2c *priv) +{ + int timeout = FALCON_I2C_BUSY_TIMEOUT; + + while ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) + != I2C_BUS_STAT_BS_FREE) { + if (timeout <= 0) { + dev_warn(priv->dev, "timeout waiting for bus ready\n"); + return -ETIMEDOUT; + } + timeout--; + mdelay(1); + } + + return 0; +} + +static void falcon_i2c_tx(struct falcon_i2c *priv, int last) +{ + if (priv->msg_buf_len && priv->msg_buf) { + i2c_w32(*priv->msg_buf, txd); + + if (--priv->msg_buf_len) + priv->msg_buf++; + else + priv->msg_buf = NULL; + } else + last = 1; + + if (last) { + disable_burst_irq(priv); + } +} + +static void falcon_i2c_rx(struct falcon_i2c *priv, int last) +{ + u32 fifo_stat,timeout; + if (priv->msg_buf_len && priv->msg_buf) { + timeout = 5000000; + do { + fifo_stat = i2c_r32(ffs_stat); + } while (!fifo_stat && --timeout); + if (!timeout) { + last = 1; + PRINTK("\nrx timeout\n"); + goto err; + } + while (fifo_stat) { + *priv->msg_buf = i2c_r32(rxd); + if (--priv->msg_buf_len) + priv->msg_buf++; + else { + priv->msg_buf = NULL; + last = 1; + break; + } + #if 0 + fifo_stat = i2c_r32(ffs_stat); + #else + /* do not read more than burst size, otherwise no "last + burst" is generated and the transaction is blocked! */ + fifo_stat = 0; + #endif + } + } else { + last = 1; + } +err: + if (last) { + disable_burst_irq(priv); + + if (priv->status == STATUS_READ_END) { + /* do the STATUS_STOP and complete() here, as sometimes + the tx_end is already seen before this is finished */ + priv->status = STATUS_STOP; + complete(&priv->cmd_complete); + } else { + i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); + priv->status = STATUS_READ_END; + } + } +} + +static void falcon_i2c_xfer_init(struct falcon_i2c *priv) +{ + /* enable interrupts */ + i2c_w32(FALCON_I2C_IMSC_DEFAULT_MASK, imsc); + + /* trigger transfer of first msg */ + set_tx_len(priv); +} + +static void dump_msgs(struct i2c_msg msgs[], int num, int rx) +{ +#if defined(DEBUG) + int i, j; + printk("Messages %d %s\n", num, rx ? "out" : "in"); + for (i = 0; i < num; i++) { + printk("%2d %cX Msg(%d) addr=0x%X: ", i, + (msgs[i].flags & I2C_M_RD)?'R':'T', + msgs[i].len, msgs[i].addr); + if (!(msgs[i].flags & I2C_M_RD) || rx) { + for (j = 0; j < msgs[i].len; j++) + printk("%02X ", msgs[i].buf[j]); + } + printk("\n"); + } +#endif +} + +static void falcon_i2c_release_bus(struct falcon_i2c *priv) +{ + if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM) + i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); +} + +static int falcon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + int num) +{ + struct falcon_i2c *priv = i2c_get_adapdata(adap); + int ret; + + dev_dbg(priv->dev, "xfer %u messages\n", num); + dump_msgs(msgs, num, 0); + + mutex_lock(&priv->mutex); + + INIT_COMPLETION(priv->cmd_complete); + priv->current_msg = msgs; + priv->msgs_num = num; + priv->msg_err = 0; + priv->status = STATUS_IDLE; + + /* wait for the bus to become ready */ + ret = falcon_i2c_wait_bus_not_busy(priv); + if (ret) + goto done; + + while (priv->msgs_num) { + /* start the transfers */ + falcon_i2c_xfer_init(priv); + + /* wait for transfers to complete */ + ret = wait_for_completion_interruptible_timeout( + &priv->cmd_complete, FALCON_I2C_XFER_TIMEOUT); + if (ret == 0) { + dev_err(priv->dev, "controller timed out\n"); + falcon_i2c_hw_init(adap); + ret = -ETIMEDOUT; + goto done; + } else if (ret < 0) + goto done; + + if (priv->msg_err) { + if (priv->msg_err & FALCON_I2C_NACK) + ret = -ENXIO; + else + ret = -EREMOTEIO; + goto done; + } + if (--priv->msgs_num) { + priv->current_msg++; + } + } + /* no error? */ + ret = num; + +done: + falcon_i2c_release_bus(priv); + + mutex_unlock(&priv->mutex); + + if (ret>=0) + dump_msgs(msgs, num, 1); + + PRINTK("XFER ret %d\n", ret); + return ret; +} + +static irqreturn_t falcon_i2c_isr_burst(int irq, void *dev_id) +{ + struct falcon_i2c *priv = dev_id; + struct i2c_msg *msg = priv->current_msg; + int last = (irq == priv->irq_lb); + + if (last) + PRINTK("LB "); + else + PRINTK("B "); + + if (msg->flags & I2C_M_RD) { + switch (priv->status) { + case STATUS_ADDR: + PRINTK("X"); + prepare_msg_send_addr(priv); + disable_burst_irq(priv); + break; + case STATUS_READ: + case STATUS_READ_END: + PRINTK("R"); + falcon_i2c_rx(priv, last); + break; + default: + disable_burst_irq(priv); + printk("Status R %d\n", priv->status); + break; + } + } else { + switch (priv->status) { + case STATUS_ADDR: + PRINTK("x"); + prepare_msg_send_addr(priv); + break; + case STATUS_WRITE: + PRINTK("w"); + falcon_i2c_tx(priv, last); + break; + default: + disable_burst_irq(priv); + printk("Status W %d\n", priv->status); + break; + } + } + + i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr); + return IRQ_HANDLED; +} + +static void falcon_i2c_isr_prot(struct falcon_i2c *priv) +{ + u32 i_pro = i2c_r32(p_irqss); + + PRINTK("i2c-p"); + + /* not acknowledge */ + if (i_pro & I2C_P_IRQSS_NACK) { + priv->msg_err |= FALCON_I2C_NACK; + PRINTK(" nack"); + } + + /* arbitration lost */ + if (i_pro & I2C_P_IRQSS_AL) { + priv->msg_err |= FALCON_I2C_ARB_LOST; + PRINTK(" arb-lost"); + } + /* tx -> rx switch */ + if (i_pro & I2C_P_IRQSS_RX) + PRINTK(" rx"); + + /* tx end */ + if (i_pro & I2C_P_IRQSS_TX_END) + PRINTK(" txend"); + PRINTK("\n"); + + if (!priv->msg_err) { + /* tx -> rx switch */ + if (i_pro & I2C_P_IRQSS_RX) { + priv->status = STATUS_READ; + enable_burst_irq(priv); + } + if (i_pro & I2C_P_IRQSS_TX_END) { + if (priv->status == STATUS_READ) + priv->status = STATUS_READ_END; + else { + disable_burst_irq(priv); + priv->status = STATUS_STOP; + } + } + } + + i2c_w32(i_pro, p_irqsc); +} + +static irqreturn_t falcon_i2c_isr(int irq, void *dev_id) +{ + u32 i_raw, i_err=0; + struct falcon_i2c *priv = dev_id; + + i_raw = i2c_r32(mis); + PRINTK("i_raw 0x%08X\n", i_raw); + + /* error interrupt */ + if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) { + i_err = i2c_r32(err_irqss); + PRINTK("i_err 0x%08X bus_stat 0x%04X\n", + i_err, i2c_r32(bus_stat)); + + /* tx fifo overflow (8) */ + if (i_err & I2C_ERR_IRQSS_TXF_OFL) + priv->msg_err |= FALCON_I2C_TX_OFL; + + /* tx fifo underflow (4) */ + if (i_err & I2C_ERR_IRQSS_TXF_UFL) + priv->msg_err |= FALCON_I2C_TX_UFL; + + /* rx fifo overflow (2) */ + if (i_err & I2C_ERR_IRQSS_RXF_OFL) + priv->msg_err |= FALCON_I2C_RX_OFL; + + /* rx fifo underflow (1) */ + if (i_err & I2C_ERR_IRQSS_RXF_UFL) + priv->msg_err |= FALCON_I2C_RX_UFL; + + i2c_w32(i_err, err_irqsc); + } + + /* protocol interrupt */ + if (i_raw & I2C_RIS_I2C_P_INT_INTOCC) + falcon_i2c_isr_prot(priv); + + if ((priv->msg_err) || (priv->status == STATUS_STOP)) + complete(&priv->cmd_complete); + + return IRQ_HANDLED; +} + +static u32 falcon_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | + I2C_FUNC_10BIT_ADDR | + I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm falcon_i2c_algorithm = { + .master_xfer = falcon_i2c_xfer, + .functionality = falcon_i2c_functionality, +}; + +static int __devinit falcon_i2c_probe(struct platform_device *pdev) +{ + int ret = 0; + struct falcon_i2c *priv; + struct i2c_adapter *adap; + struct resource *mmres, *ioarea, + *irqres_lb, *irqres_b, *irqres_err, *irqres_p; + struct clk *clk; + + dev_dbg(&pdev->dev, "probing\n"); + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irqres_lb = platform_get_resource_byname(pdev, IORESOURCE_IRQ, + "i2c_lb"); + irqres_b = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_b"); + irqres_err = platform_get_resource_byname(pdev, IORESOURCE_IRQ, + "i2c_err"); + irqres_p = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_p"); + + if (!mmres || !irqres_lb || !irqres_b || !irqres_err || !irqres_p) { + dev_err(&pdev->dev, "no resources\n"); + return -ENODEV; + } + + clk = clk_get(&pdev->dev, "fpi"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get fpi clk\n"); + return -ENOENT; + } + + if (clk_get_rate(clk) != 100000000) { + dev_err(&pdev->dev, "input clock is not 100MHz\n"); + return -ENOENT; + } + + /* allocate private data */ + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&pdev->dev, "can't allocate private data\n"); + return -ENOMEM; + } + + adap = &priv->adap; + i2c_set_adapdata(adap, priv); + adap->owner = THIS_MODULE; + adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name)); + adap->algo = &falcon_i2c_algorithm; + + priv->mode = FALCON_I2C_MODE_100; + priv->clk = clk; + priv->dev = &pdev->dev; + + init_completion(&priv->cmd_complete); + mutex_init(&priv->mutex); + + ret = ltq_gpio_request(107, 0, 0, 0, DRV_NAME":sda"); + if (ret) { + dev_err(&pdev->dev, "I2C gpio 107 (sda) not available\n"); + ret = -ENXIO; + goto err_free_priv; + } + ret = ltq_gpio_request(108, 0, 0, 0, DRV_NAME":scl"); + if (ret) { + gpio_free(107); + dev_err(&pdev->dev, "I2C gpio 108 (scl) not available\n"); + ret = -ENXIO; + goto err_free_priv; + } + + ioarea = request_mem_region(mmres->start, resource_size(mmres), + pdev->name); + + if (ioarea == NULL) { + dev_err(&pdev->dev, "I2C region already claimed\n"); + ret = -ENXIO; + goto err_free_gpio; + } + + /* map memory */ + priv->membase = ioremap_nocache(mmres->start & ~KSEG1, + resource_size(mmres)); + if (priv->membase == NULL) { + ret = -ENOMEM; + goto err_release_region; + } + + priv->irq_lb = irqres_lb->start; + ret = request_irq(priv->irq_lb, falcon_i2c_isr_burst, IRQF_DISABLED, + irqres_lb->name, priv); + if (ret) { + dev_err(&pdev->dev, "can't get last burst IRQ %d\n", irqres_lb->start); + ret = -ENODEV; + goto err_unmap_mem; + } + + priv->irq_b = irqres_b->start; + ret = request_irq(priv->irq_b, falcon_i2c_isr_burst, IRQF_DISABLED, + irqres_b->name, priv); + if (ret) { + dev_err(&pdev->dev, "can't get burst IRQ %d\n", irqres_b->start); + ret = -ENODEV; + goto err_free_lb_irq; + } + + priv->irq_err = irqres_err->start; + ret = request_irq(priv->irq_err, falcon_i2c_isr, IRQF_DISABLED, + irqres_err->name, priv); + if (ret) { + dev_err(&pdev->dev, "can't get error IRQ %d\n", irqres_err->start); + ret = -ENODEV; + goto err_free_b_irq; + } + + priv->irq_p = irqres_p->start; + ret = request_irq(priv->irq_p, falcon_i2c_isr, IRQF_DISABLED, + irqres_p->name, priv); + if (ret) { + dev_err(&pdev->dev, "can't get protocol IRQ %d\n", irqres_p->start); + ret = -ENODEV; + goto err_free_err_irq; + } + + dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase); + dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres_lb->start, + irqres_b->start, irqres_err->start, irqres_p->start); + + /* add our adapter to the i2c stack */ + ret = i2c_add_numbered_adapter(adap); + if (ret) { + dev_err(&pdev->dev, "can't register I2C adapter\n"); + goto err_free_p_irq; + } + + platform_set_drvdata(pdev, priv); + i2c_set_adapdata(adap, priv); + + /* print module version information */ + dev_dbg(&pdev->dev, "module id=%u revision=%u\n", + (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET, + (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET); + + /* initialize HW */ + ret = falcon_i2c_hw_init(adap); + if (ret) { + dev_err(&pdev->dev, "can't configure adapter\n"); + goto err_remove_adapter; + } + + dev_info(&pdev->dev, "version %s\n", DRV_VERSION); + + return 0; + +err_remove_adapter: + i2c_del_adapter(adap); + platform_set_drvdata(pdev, NULL); + +err_free_p_irq: + free_irq(priv->irq_p, priv); + +err_free_err_irq: + free_irq(priv->irq_err, priv); + +err_free_b_irq: + free_irq(priv->irq_b, priv); + +err_free_lb_irq: + free_irq(priv->irq_lb, priv); + +err_unmap_mem: + iounmap(priv->membase); + +err_release_region: + release_mem_region(mmres->start, resource_size(mmres)); + +err_free_gpio: + gpio_free(108); + gpio_free(107); + +err_free_priv: + kfree(priv); + + return ret; +} + +static int __devexit falcon_i2c_remove(struct platform_device *pdev) +{ + struct falcon_i2c *priv = platform_get_drvdata(pdev); + struct resource *mmres; + + /* disable bus */ + i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); + + /* remove driver */ + platform_set_drvdata(pdev, NULL); + i2c_del_adapter(&priv->adap); + + free_irq(priv->irq_lb, priv); + free_irq(priv->irq_b, priv); + free_irq(priv->irq_err, priv); + free_irq(priv->irq_p, priv); + + iounmap(priv->membase); + + gpio_free(108); + gpio_free(107); + + kfree(priv); + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mmres->start, resource_size(mmres)); + + dev_dbg(&pdev->dev, "removed\n"); + + return 0; +} + +static struct platform_driver falcon_i2c_driver = { + .probe = falcon_i2c_probe, + .remove = __devexit_p(falcon_i2c_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init falcon_i2c_init(void) +{ + int ret; + + ret = platform_driver_register(&falcon_i2c_driver); + + if (ret) + pr_debug(DRV_NAME ": can't register platform driver\n"); + + return ret; +} + +static void __exit falcon_i2c_exit(void) +{ + platform_driver_unregister(&falcon_i2c_driver); +} + +module_init(falcon_i2c_init); +module_exit(falcon_i2c_exit); + +MODULE_DESCRIPTION("Lantiq FALC(tm) ON - I2C bus adapter"); +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION);