From 9c7a6f8804aef7559ee8edcb7466676ee7d00c09 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sat, 27 Aug 2011 20:08:14 +0200 Subject: [PATCH 41/70] MIPS: lantiq: add xway nand driver This patch adds a nand driver for XWAY SoCs. The patch makes use of the plat_nand driver. As with the EBU NOR driver merged in 3.0, we have the endianess swap problem on read. To workaround this problem we make the read_byte() callback available via the plat_nand driver causing the nand layer to do byte reads. Signed-off-by: John Crispin TODO : memory ranges cs lines plat dev ebu2 and not ebu1 ? --- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 2 + arch/mips/lantiq/xway/Makefile | 2 +- arch/mips/lantiq/xway/devices.h | 1 + arch/mips/lantiq/xway/nand.c | 216 ++++++++++++++++++++ drivers/mtd/nand/plat_nand.c | 1 + include/linux/mtd/nand.h | 1 + 6 files changed, 222 insertions(+), 1 deletions(-) create mode 100644 arch/mips/lantiq/xway/nand.c --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h @@ -145,6 +145,8 @@ /* register access macros for EBU and CGU */ #define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y)) #define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x)) +#define ltq_ebu_w32_mask(x, y, z) \ + ltq_w32_mask(x, y, ltq_ebu_membase + (z)) #define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y)) #define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x)) --- a/arch/mips/lantiq/xway/Makefile +++ b/arch/mips/lantiq/xway/Makefile @@ -1,4 +1,4 @@ -obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o +obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o --- a/arch/mips/lantiq/xway/devices.h +++ b/arch/mips/lantiq/xway/devices.h @@ -16,5 +16,6 @@ extern void ltq_register_gpio(void); extern void ltq_register_gpio_stp(void); extern void ltq_register_ase_asc(void); extern void ltq_register_etop(struct ltq_eth_data *eth); +extern void xway_register_nand(struct mtd_partition *parts, int count); #endif --- /dev/null +++ b/arch/mips/lantiq/xway/nand.c @@ -0,0 +1,216 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include "devices.h" + +/* nand registers */ +#define LTQ_EBU_NAND_WAIT 0xB4 +#define LTQ_EBU_NAND_ECC0 0xB8 +#define LTQ_EBU_NAND_ECC_AC 0xBC +#define LTQ_EBU_NAND_CON 0xB0 +#define LTQ_EBU_ADDSEL1 0x24 + +/* gpio definitions */ +#define PIN_ALE 13 +#define PIN_CLE 24 +#define PIN_CS1 23 +#define PIN_RDY 48 /* NFLASH_READY */ +#define PIN_RD 49 /* NFLASH_READ_N */ + +#define NAND_CMD_ALE (1 << 2) +#define NAND_CMD_CLE (1 << 3) +#define NAND_CMD_CS (1 << 4) +#define NAND_WRITE_CMD_RESET 0xff +#define NAND_WRITE_CMD (NAND_CMD_CS | NAND_CMD_CLE) +#define NAND_WRITE_ADDR (NAND_CMD_CS | NAND_CMD_ALE) +#define NAND_WRITE_DATA (NAND_CMD_CS) +#define NAND_READ_DATA (NAND_CMD_CS) +#define NAND_WAIT_WR_C (1 << 3) +#define NAND_WAIT_RD (0x1) + +#define ADDSEL1_MASK(x) (x << 4) +#define ADDSEL1_REGEN 1 +#define BUSCON1_SETUP (1 << 22) +#define BUSCON1_BCGEN_RES (0x3 << 12) +#define BUSCON1_WAITWRC2 (2 << 8) +#define BUSCON1_WAITRDC2 (2 << 6) +#define BUSCON1_HOLDC1 (1 << 4) +#define BUSCON1_RECOVC1 (1 << 2) +#define BUSCON1_CMULT4 1 +#define NAND_CON_NANDM 1 +#define NAND_CON_CSMUX (1 << 1) +#define NAND_CON_CS_P (1 << 4) +#define NAND_CON_SE_P (1 << 5) +#define NAND_CON_WP_P (1 << 6) +#define NAND_CON_PRE_P (1 << 7) +#define NAND_CON_IN_CS0 0 +#define NAND_CON_OUT_CS0 0 +#define NAND_CON_IN_CS1 (1 << 8) +#define NAND_CON_OUT_CS1 (1 << 10) +#define NAND_CON_CE (1 << 20) + +#define NAND_BASE_ADDRESS (KSEG1 | 0x14000000) + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static void xway_select_chip(struct mtd_info *mtd, int chip) +{ + switch (chip) { + case -1: + ltq_ebu_w32_mask(NAND_CON_CE, 0, LTQ_EBU_NAND_CON); + ltq_ebu_w32_mask(NAND_CON_NANDM, 0, LTQ_EBU_NAND_CON); + break; + case 0: + ltq_ebu_w32_mask(0, NAND_CON_NANDM, LTQ_EBU_NAND_CON); + ltq_ebu_w32_mask(0, NAND_CON_CE, LTQ_EBU_NAND_CON); + /* reset the nand chip */ + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + ltq_w32(NAND_WRITE_CMD_RESET, + ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD))); + break; + default: + BUG(); + } +} + +static void xway_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) + this->IO_ADDR_W = (void __iomem *) + (NAND_BASE_ADDRESS | NAND_WRITE_CMD); + else if (ctrl & NAND_ALE) + this->IO_ADDR_W = (void __iomem *) + (NAND_BASE_ADDRESS | NAND_WRITE_ADDR); + } + + if (data != NAND_CMD_NONE) { + *(volatile u8*) ((u32) this->IO_ADDR_W) = data; + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + } +} + +static int xway_dev_ready(struct mtd_info *mtd) +{ + return ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_RD; +} + +void nand_write(unsigned int addr, unsigned int val) +{ + ltq_w32(val, ((u32 *) (NAND_BASE_ADDRESS | addr))); + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; +} + +unsigned char xway_read_byte(struct mtd_info *mtd) +{ + return ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA))); +} + +static void xway_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) + { + unsigned char res8 = ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA))); + buf[i] = res8; + } +} + +static void xway_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) + { + ltq_w8(buf[i], ((u32*)(NAND_BASE_ADDRESS | (NAND_WRITE_DATA)))); + while((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0); + } +} + +int xway_probe(struct platform_device *pdev) +{ + /* might need this later ? + ltq_gpio_request(PIN_CS1, 2, 1, "NAND_CS1"); + */ + ltq_gpio_request(&pdev->dev, PIN_CLE, 2, 1, "NAND_CLE"); + ltq_gpio_request(&pdev->dev, PIN_ALE, 2, 1, "NAND_ALE"); + if (ltq_is_ar9() || ltq_is_vr9()) { + ltq_gpio_request(&pdev->dev, PIN_RDY, 2, 0, "NAND_BSY"); + ltq_gpio_request(&pdev->dev, PIN_RD, 2, 1, "NAND_RD"); + } + + ltq_ebu_w32((NAND_BASE_ADDRESS & 0x1fffff00) + | ADDSEL1_MASK(3) | ADDSEL1_REGEN, LTQ_EBU_ADDSEL1); + + ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2 + | BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1 + | BUSCON1_CMULT4, LTQ_EBU_BUSCON1); + + ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P + | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P + | NAND_CON_IN_CS0 | NAND_CON_OUT_CS0, LTQ_EBU_NAND_CON); + + ltq_w32(NAND_WRITE_CMD_RESET, + ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD))); + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + + return 0; +} + +static struct platform_nand_data falcon_flash_nand_data = { + .chip = { + .nr_chips = 1, + .chip_delay = 30, + .part_probe_types = part_probes, + }, + .ctrl = { + .probe = xway_probe, + .cmd_ctrl = xway_cmd_ctrl, + .dev_ready = xway_dev_ready, + .select_chip = xway_select_chip, + .read_byte = xway_read_byte, + .read_buf = xway_read_buf, + .write_buf = xway_write_buf, + } +}; + +static struct resource ltq_nand_res = + MEM_RES("nand", 0x14000000, 0x7ffffff); + +static struct platform_device ltq_flash_nand = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = <q_nand_res, + .dev = { + .platform_data = &falcon_flash_nand_data, + }, +}; + +void __init xway_register_nand(struct mtd_partition *parts, int count) +{ + falcon_flash_nand_data.chip.partitions = parts; + falcon_flash_nand_data.chip.nr_partitions = count; + platform_device_register(<q_flash_nand); +} --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -75,6 +75,7 @@ static int __devinit plat_nand_probe(str data->chip.select_chip = pdata->ctrl.select_chip; data->chip.write_buf = pdata->ctrl.write_buf; data->chip.read_buf = pdata->ctrl.read_buf; + data->chip.read_byte = pdata->ctrl.read_byte; data->chip.chip_delay = pdata->chip.chip_delay; data->chip.options |= pdata->chip.options; data->chip.bbt_options |= pdata->chip.bbt_options; --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -651,6 +651,7 @@ struct platform_nand_ctrl { void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); + unsigned char (*read_byte)(struct mtd_info *mtd); void *priv; };