From: Rod Whitby Subject: ixp4xx: Merge nslu2-power.c into nslu2-setup.c (Patch #4807) There is no reason to have power control in a separate file from the board setup code. Merge it back into the board setup file, removing superfluous header includes and removing superfluous constants from the machine header file. Signed-off-by: Rod Whitby -- PATCH FOLLOWS KernelVersion: v2.6.24-1917-gaf66bd3 Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile =================================================================== --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile +++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile @@ -24,9 +24,9 @@ obj-$(CONFIG_MACH_AVILA) += avila-setup. obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o -obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o -obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o -obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o +obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o +obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o +obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o obj-$(CONFIG_MACH_FSG) += fsg-setup.o Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-power.c =================================================================== --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nslu2-power.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nslu2-power.c - * - * NSLU2 Power/Reset driver - * - * Copyright (C) 2005 Tower Technologies - * - * based on nslu2-io.c - * Copyright (C) 2004 Karen Spearel - * - * Author: Alessandro Zummo - * Maintainers: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include - -#include - -static irqreturn_t nslu2_power_handler(int irq, void *dev_id) -{ - /* Signal init to do the ctrlaltdel action, this will bypass init if - * it hasn't started and do a kernel_restart. - */ - ctrl_alt_del(); - - return IRQ_HANDLED; -} - -static irqreturn_t nslu2_reset_handler(int irq, void *dev_id) -{ - /* This is the paper-clip reset, it shuts the machine down directly. - */ - machine_power_off(); - - return IRQ_HANDLED; -} - -static int __init nslu2_power_init(void) -{ - if (!(machine_is_nslu2())) - return 0; - - *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */ - - set_irq_type(NSLU2_RB_IRQ, IRQT_LOW); - set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH); - - if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler, - IRQF_DISABLED, "NSLU2 reset button", NULL) < 0) { - - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", - NSLU2_RB_IRQ); - - return -EIO; - } - - if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler, - IRQF_DISABLED, "NSLU2 power button", NULL) < 0) { - - printk(KERN_DEBUG "Power Button IRQ %d not available\n", - NSLU2_PB_IRQ); - - return -EIO; - } - - return 0; -} - -static void __exit nslu2_power_exit(void) -{ - if (!(machine_is_nslu2())) - return; - - free_irq(NSLU2_RB_IRQ, NULL); - free_irq(NSLU2_PB_IRQ, NULL); -} - -module_init(nslu2_power_init); -module_exit(nslu2_power_exit); - -MODULE_AUTHOR("Alessandro Zummo "); -MODULE_DESCRIPTION("NSLU2 Power/Reset driver"); -MODULE_LICENSE("GPL"); Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c =================================================================== --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c +++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -3,22 +3,26 @@ * * NSLU2 board-setup * - * based ixdp425-setup.c: + * Copyright (C) 2008 Rod Whitby + * + * based on ixdp425-setup.c: * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nslu2-power.c: + * Copyright (C) 2005 Tower Technologies * * Author: Mark Rakes * Author: Rod Whitby + * Author: Alessandro Zummo * Maintainers: http://www.nslu2-linux.org/ * - * Fixed missing init_time in MACHINE_START kas11 10/22/04 - * Changed to conform to new style __init ixdp425 kas11 10/22/04 */ #include -#include +#include #include #include #include +#include #include #include @@ -27,6 +31,7 @@ #include #include #include +#include static struct flash_platform_data nslu2_flash_data = { .map_name = "cfi_probe", @@ -181,6 +186,25 @@ static void nslu2_power_off(void) gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); } +static irqreturn_t nslu2_power_handler(int irq, void *dev_id) +{ + /* Signal init to do the ctrlaltdel action, this will bypass init if + * it hasn't started and do a kernel_restart. + */ + ctrl_alt_del(); + + return IRQ_HANDLED; +} + +static irqreturn_t nslu2_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset, it shuts the machine down directly. + */ + machine_power_off(); + + return IRQ_HANDLED; +} + static void __init nslu2_timer_init(void) { /* The xtal on this machine is non-standard. */ @@ -206,8 +230,6 @@ static void __init nslu2_init(void) nslu2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; - pm_power_off = nslu2_power_off; - i2c_register_board_info(0, nslu2_i2c_board_info, ARRAY_SIZE(nslu2_i2c_board_info)); @@ -220,6 +242,23 @@ static void __init nslu2_init(void) platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); + pm_power_off = nslu2_power_off; + + if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, + "NSLU2 reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(NSLU2_RB_GPIO)); + } + + if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler, + IRQF_DISABLED | IRQF_TRIGGER_HIGH, + "NSLU2 power button", NULL) < 0) { + + printk(KERN_DEBUG "Power Button IRQ %d not available\n", + gpio_to_irq(NSLU2_PB_GPIO)); + } /* * Map in a portion of the flash and read the MAC address. Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/nslu2.h =================================================================== --- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/nslu2.h +++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/nslu2.h @@ -39,34 +39,17 @@ /* Buttons */ -#define NSLU2_PB_GPIO 5 +#define NSLU2_PB_GPIO 5 /* power button */ #define NSLU2_PO_GPIO 8 /* power off */ -#define NSLU2_RB_GPIO 12 - -#define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5 -#define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12 - -#define NSLU2_PB_BM (1L << NSLU2_PB_GPIO) -#define NSLU2_PO_BM (1L << NSLU2_PO_GPIO) -#define NSLU2_RB_BM (1L << NSLU2_RB_GPIO) +#define NSLU2_RB_GPIO 12 /* reset button */ /* Buzzer */ #define NSLU2_GPIO_BUZZ 4 -#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ) /* LEDs */ #define NSLU2_LED_RED_GPIO 0 #define NSLU2_LED_GRN_GPIO 1 - -#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED_GPIO) -#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN_GPIO) - #define NSLU2_LED_DISK1_GPIO 3 #define NSLU2_LED_DISK2_GPIO 2 - -#define NSLU2_LED_DISK1_BM (1L << NSLU2_LED_DISK1_GPIO) -#define NSLU2_LED_DISK2_BM (1L << NSLU2_LED_DISK2_GPIO) - - Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-power.c =================================================================== --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-power.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nas100d-power.c - * - * NAS 100d Power/Reset driver - * - * Copyright (C) 2005 Tower Technologies - * - * based on nas100d-io.c - * Copyright (C) 2004 Karen Spearel - * - * Author: Alessandro Zummo - * Maintainers: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -/* This is used to make sure the power-button pusher is serious. The button - * must be held until the value of this counter reaches zero. - */ -static int power_button_countdown; - -/* Must hold the button down for at least this many counts to be processed */ -#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ - -static void nas100d_power_handler(unsigned long data); -static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0); - -static void nas100d_power_handler(unsigned long data) -{ - /* This routine is called twice per second to check the - * state of the power button. - */ - - if (gpio_get_value(NAS100D_PB_GPIO)) { - - /* IO Pin is 1 (button pushed) */ - if (power_button_countdown > 0) - power_button_countdown--; - - } else { - - /* Done on button release, to allow for auto-power-on mods. */ - if (power_button_countdown == 0) { - /* Signal init to do the ctrlaltdel action, - * this will bypass init if it hasn't started - * and do a kernel_restart. - */ - ctrl_alt_del(); - - /* Change the state of the power LED to "blink" */ - gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW); - } else { - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - } - } - - mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); -} - -static irqreturn_t nas100d_reset_handler(int irq, void *dev_id) -{ - /* This is the paper-clip reset, it shuts the machine down directly. */ - machine_power_off(); - - return IRQ_HANDLED; -} - -static int __init nas100d_power_init(void) -{ - if (!(machine_is_nas100d())) - return 0; - - set_irq_type(gpio_to_irq(NAS100D_RB_GPIO), IRQT_LOW); - - if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler, - IRQF_DISABLED, "NAS100D reset button", NULL) < 0) { - - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", - gpio_to_irq(NAS100D_RB_GPIO)); - - return -EIO; - } - - /* The power button on the Iomega NAS100d is on GPIO 14, but - * it cannot handle interrupts on that GPIO line. So we'll - * have to poll it with a kernel timer. - */ - - /* Make sure that the power button GPIO is set up as an input */ - gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN); - - /* Set the initial value for the power button IRQ handler */ - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - - mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); - - return 0; -} - -static void __exit nas100d_power_exit(void) -{ - if (!(machine_is_nas100d())) - return; - - del_timer_sync(&nas100d_power_timer); - - free_irq(gpio_to_irq(NAS100D_RB_GPIO), NULL); -} - -module_init(nas100d_power_init); -module_exit(nas100d_power_exit); - -MODULE_AUTHOR("Alessandro Zummo "); -MODULE_DESCRIPTION("NAS100D Power/Reset driver"); -MODULE_LICENSE("GPL"); Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c =================================================================== --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c +++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -3,8 +3,14 @@ * * NAS 100d board-setup * - * based ixdp425-setup.c: + * Copyright (C) 2008 Rod Whitby + * + * based on ixdp425-setup.c: * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nas100d-power.c: + * Copyright (C) 2005 Tower Technologies + * based on nas100d-io.c + * Copyright (C) 2004 Karen Spearel * * Author: Alessandro Zummo * Author: Rod Whitby @@ -13,10 +19,13 @@ */ #include -#include +#include +#include +#include #include #include #include +#include #include #include @@ -24,6 +33,7 @@ #include #include #include +#include static struct flash_platform_data nas100d_flash_data = { .map_name = "cfi_probe", @@ -168,6 +178,57 @@ static void nas100d_power_off(void) gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH); } +/* This is used to make sure the power-button pusher is serious. The button + * must be held until the value of this counter reaches zero. + */ +static int power_button_countdown; + +/* Must hold the button down for at least this many counts to be processed */ +#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ + +static void nas100d_power_handler(unsigned long data); +static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0); + +static void nas100d_power_handler(unsigned long data) +{ + /* This routine is called twice per second to check the + * state of the power button. + */ + + if (gpio_get_value(NAS100D_PB_GPIO)) { + + /* IO Pin is 1 (button pushed) */ + if (power_button_countdown > 0) + power_button_countdown--; + + } else { + + /* Done on button release, to allow for auto-power-on mods. */ + if (power_button_countdown == 0) { + /* Signal init to do the ctrlaltdel action, + * this will bypass init if it hasn't started + * and do a kernel_restart. + */ + ctrl_alt_del(); + + /* Change the state of the power LED to "blink" */ + gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW); + } else { + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + } + } + + mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); +} + +static irqreturn_t nas100d_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset, it shuts the machine down directly. */ + machine_power_off(); + + return IRQ_HANDLED; +} + static void __init nas100d_init(void) { DECLARE_MAC_BUF(mac_buf); @@ -183,8 +244,6 @@ static void __init nas100d_init(void) nas100d_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; - pm_power_off = nas100d_power_off; - i2c_register_board_info(0, nas100d_i2c_board_info, ARRAY_SIZE(nas100d_i2c_board_info)); @@ -197,6 +256,29 @@ static void __init nas100d_init(void) platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices)); + pm_power_off = nas100d_power_off; + + if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, + "NAS100D reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(NAS100D_RB_GPIO)); + } + + /* The power button on the Iomega NAS100d is on GPIO 14, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Make sure that the power button GPIO is set up as an input */ + gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500)); + /* * Map in a portion of the flash and read the MAC address. * Since it is stored in BE in the flash itself, we need to Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-power.c =================================================================== --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/dsmg600-power.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/dsmg600-power.c - * - * DSM-G600 Power/Reset driver - * Author: Michael Westerhof - * - * Based on nslu2-power.c - * Copyright (C) 2005 Tower Technologies - * Author: Alessandro Zummo - * - * which was based on nslu2-io.c - * Copyright (C) 2004 Karen Spearel - * - * Maintainers: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -/* This is used to make sure the power-button pusher is serious. The button - * must be held until the value of this counter reaches zero. - */ -static int power_button_countdown; - -/* Must hold the button down for at least this many counts to be processed */ -#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ - -static void dsmg600_power_handler(unsigned long data); -static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0); - -static void dsmg600_power_handler(unsigned long data) -{ - /* This routine is called twice per second to check the - * state of the power button. - */ - - if (gpio_get_value(DSMG600_PB_GPIO)) { - - /* IO Pin is 1 (button pushed) */ - if (power_button_countdown > 0) - power_button_countdown--; - - } else { - - /* Done on button release, to allow for auto-power-on mods. */ - if (power_button_countdown == 0) { - /* Signal init to do the ctrlaltdel action, - * this will bypass init if it hasn't started - * and do a kernel_restart. - */ - ctrl_alt_del(); - - /* Change the state of the power LED to "blink" */ - gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW); - } else { - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - } - } - - mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); -} - -static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id) -{ - /* This is the paper-clip reset, it shuts the machine down directly. */ - machine_power_off(); - - return IRQ_HANDLED; -} - -static int __init dsmg600_power_init(void) -{ - if (!(machine_is_dsmg600())) - return 0; - - if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button", - NULL) < 0) { - - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", - gpio_to_irq(DSMG600_RB_GPIO)); - - return -EIO; - } - - /* The power button on the D-Link DSM-G600 is on GPIO 15, but - * it cannot handle interrupts on that GPIO line. So we'll - * have to poll it with a kernel timer. - */ - - /* Make sure that the power button GPIO is set up as an input */ - gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN); - - /* Set the initial value for the power button IRQ handler */ - power_button_countdown = PBUTTON_HOLDDOWN_COUNT; - - mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); - - return 0; -} - -static void __exit dsmg600_power_exit(void) -{ - if (!(machine_is_dsmg600())) - return; - - del_timer_sync(&dsmg600_power_timer); - - free_irq(gpio_to_irq(DSMG600_RB_GPIO), NULL); -} - -module_init(dsmg600_power_init); -module_exit(dsmg600_power_exit); - -MODULE_AUTHOR("Michael Westerhof "); -MODULE_DESCRIPTION("DSM-G600 Power/Reset driver"); -MODULE_LICENSE("GPL"); Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-setup.c =================================================================== --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -1,20 +1,29 @@ /* * DSM-G600 board-setup * + * Copyright (C) 2008 Rod Whitby * Copyright (C) 2006 Tower Technologies - * Author: Alessandro Zummo * - * based ixdp425-setup.c: + * based on ixdp425-setup.c: * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nslu2-power.c: + * Copyright (C) 2005 Tower Technologies + * based on nslu2-io.c: + * Copyright (C) 2004 Karen Spearel * * Author: Alessandro Zummo + * Author: Michael Westerhof + * Author: Rod Whitby * Maintainers: http://www.nslu2-linux.org/ */ -#include +#include +#include +#include #include #include #include +#include #include #include @@ -22,6 +31,7 @@ #include #include #include +#include static struct flash_platform_data dsmg600_flash_data = { .map_name = "cfi_probe", @@ -140,6 +150,57 @@ static void dsmg600_power_off(void) gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH); } +/* This is used to make sure the power-button pusher is serious. The button + * must be held until the value of this counter reaches zero. + */ +static int power_button_countdown; + +/* Must hold the button down for at least this many counts to be processed */ +#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ + +static void dsmg600_power_handler(unsigned long data); +static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0); + +static void dsmg600_power_handler(unsigned long data) +{ + /* This routine is called twice per second to check the + * state of the power button. + */ + + if (gpio_get_value(DSMG600_PB_GPIO)) { + + /* IO Pin is 1 (button pushed) */ + if (power_button_countdown > 0) + power_button_countdown--; + + } else { + + /* Done on button release, to allow for auto-power-on mods. */ + if (power_button_countdown == 0) { + /* Signal init to do the ctrlaltdel action, + * this will bypass init if it hasn't started + * and do a kernel_restart. + */ + ctrl_alt_del(); + + /* Change the state of the power LED to "blink" */ + gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW); + } else { + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + } + } + + mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); +} + +static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset, it shuts the machine down directly. */ + machine_power_off(); + + return IRQ_HANDLED; +} + static void __init dsmg600_timer_init(void) { /* The xtal on this machine is non-standard. */ @@ -164,8 +225,6 @@ static void __init dsmg600_init(void) dsmg600_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; - pm_power_off = dsmg600_power_off; - i2c_register_board_info(0, dsmg600_i2c_board_info, ARRAY_SIZE(dsmg600_i2c_board_info)); @@ -176,6 +235,29 @@ static void __init dsmg600_init(void) (void)platform_device_register(&dsmg600_uart); platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices)); + + pm_power_off = dsmg600_power_off; + + if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, + "DSM-G600 reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(DSMG600_RB_GPIO)); + } + + /* The power button on the D-Link DSM-G600 is on GPIO 15, but + * it cannot handle interrupts on that GPIO line. So we'll + * have to poll it with a kernel timer. + */ + + /* Make sure that the power button GPIO is set up as an input */ + gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN); + + /* Set the initial value for the power button IRQ handler */ + power_button_countdown = PBUTTON_HOLDDOWN_COUNT; + + mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); } MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")