--- a/drivers/bcma/Kconfig +++ b/drivers/bcma/Kconfig @@ -29,7 +29,7 @@ config BCMA_HOST_PCI config BCMA_DRIVER_PCI_HOSTMODE bool "Driver for PCI core working in hostmode" - depends on BCMA && MIPS + depends on BCMA && MIPS && BCMA_HOST_PCI help PCI core hostmode operation (external PCI bus). --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -13,7 +13,7 @@ struct bcma_bus; /* main.c */ -int bcma_bus_register(struct bcma_bus *bus); +int __devinit bcma_bus_register(struct bcma_bus *bus); void bcma_bus_unregister(struct bcma_bus *bus); int __init bcma_bus_early_register(struct bcma_bus *bus, struct bcma_device *core_cc, @@ -48,8 +48,12 @@ extern int __init bcma_host_pci_init(voi extern void __exit bcma_host_pci_exit(void); #endif /* CONFIG_BCMA_HOST_PCI */ +/* driver_pci.c */ +u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); + #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); +bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); +void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ #endif --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -80,6 +80,7 @@ static void bcma_pmu_resources_init(stru min_msk = 0x200D; max_msk = 0xFFFF; break; + case 0x4331: case 43224: case 43225: break; --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -2,8 +2,9 @@ * Broadcom specific AMBA * PCI Core * - * Copyright 2005, Broadcom Corporation + * Copyright 2005, 2011, Broadcom Corporation * Copyright 2006, 2007, Michael Buesch + * Copyright 2011, 2012, Hauke Mehrtens * * Licensed under the GNU/GPL. See COPYING for details. */ @@ -16,40 +17,41 @@ * R/W ops. **************************************************/ -static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) +u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) { - pcicore_write32(pc, 0x130, address); - pcicore_read32(pc, 0x130); - return pcicore_read32(pc, 0x134); + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); + return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); } #if 0 static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) { - pcicore_write32(pc, 0x130, address); - pcicore_read32(pc, 0x130); - pcicore_write32(pc, 0x134, data); + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); } #endif static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) { - const u16 mdio_control = 0x128; - const u16 mdio_data = 0x12C; u32 v; int i; - v = (1 << 30); /* Start of Transaction */ - v |= (1 << 28); /* Write Transaction */ - v |= (1 << 17); /* Turnaround */ - v |= (0x1F << 18); + v = BCMA_CORE_PCI_MDIODATA_START; + v |= BCMA_CORE_PCI_MDIODATA_WRITE; + v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << + BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); + v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << + BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); + v |= BCMA_CORE_PCI_MDIODATA_TA; v |= (phy << 4); - pcicore_write32(pc, mdio_data, v); + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); udelay(10); for (i = 0; i < 200; i++) { - v = pcicore_read32(pc, mdio_control); - if (v & 0x100 /* Trans complete */) + v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); + if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) break; msleep(1); } @@ -57,79 +59,84 @@ static void bcma_pcie_mdio_set_phy(struc static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) { - const u16 mdio_control = 0x128; - const u16 mdio_data = 0x12C; int max_retries = 10; u16 ret = 0; u32 v; int i; - v = 0x80; /* Enable Preamble Sequence */ - v |= 0x2; /* MDIO Clock Divisor */ - pcicore_write32(pc, mdio_control, v); + /* enable mdio access to SERDES */ + v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; + v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); if (pc->core->id.rev >= 10) { max_retries = 200; bcma_pcie_mdio_set_phy(pc, device); + v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << + BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); + v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); + } else { + v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); + v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); } - v = (1 << 30); /* Start of Transaction */ - v |= (1 << 29); /* Read Transaction */ - v |= (1 << 17); /* Turnaround */ - if (pc->core->id.rev < 10) - v |= (u32)device << 22; - v |= (u32)address << 18; - pcicore_write32(pc, mdio_data, v); + v = BCMA_CORE_PCI_MDIODATA_START; + v |= BCMA_CORE_PCI_MDIODATA_READ; + v |= BCMA_CORE_PCI_MDIODATA_TA; + + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); /* Wait for the device to complete the transaction */ udelay(10); for (i = 0; i < max_retries; i++) { - v = pcicore_read32(pc, mdio_control); - if (v & 0x100 /* Trans complete */) { + v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); + if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { udelay(10); - ret = pcicore_read32(pc, mdio_data); + ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); break; } msleep(1); } - pcicore_write32(pc, mdio_control, 0); + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); return ret; } static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, u8 address, u16 data) { - const u16 mdio_control = 0x128; - const u16 mdio_data = 0x12C; int max_retries = 10; u32 v; int i; - v = 0x80; /* Enable Preamble Sequence */ - v |= 0x2; /* MDIO Clock Divisor */ - pcicore_write32(pc, mdio_control, v); + /* enable mdio access to SERDES */ + v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; + v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); if (pc->core->id.rev >= 10) { max_retries = 200; bcma_pcie_mdio_set_phy(pc, device); + v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << + BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); + v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); + } else { + v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); + v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); } - v = (1 << 30); /* Start of Transaction */ - v |= (1 << 28); /* Write Transaction */ - v |= (1 << 17); /* Turnaround */ - if (pc->core->id.rev < 10) - v |= (u32)device << 22; - v |= (u32)address << 18; + v = BCMA_CORE_PCI_MDIODATA_START; + v |= BCMA_CORE_PCI_MDIODATA_WRITE; + v |= BCMA_CORE_PCI_MDIODATA_TA; v |= data; - pcicore_write32(pc, mdio_data, v); + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); /* Wait for the device to complete the transaction */ udelay(10); for (i = 0; i < max_retries; i++) { - v = pcicore_read32(pc, mdio_control); - if (v & 0x100 /* Trans complete */) + v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); + if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) break; msleep(1); } - pcicore_write32(pc, mdio_control, 0); + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); } /************************************************** @@ -138,72 +145,53 @@ static void bcma_pcie_mdio_write(struct static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) { - return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; + u32 tmp; + + tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); + if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) + return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | + BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; + else + return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; } static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) { - const u8 serdes_pll_device = 0x1D; - const u8 serdes_rx_device = 0x1F; u16 tmp; - bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, - bcma_pcicore_polarity_workaround(pc)); - tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); - if (tmp & 0x4000) - bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); + bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, + BCMA_CORE_PCI_SERDES_RX_CTRL, + bcma_pcicore_polarity_workaround(pc)); + tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, + BCMA_CORE_PCI_SERDES_PLL_CTRL); + if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) + bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, + BCMA_CORE_PCI_SERDES_PLL_CTRL, + tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); } /************************************************** * Init. **************************************************/ -static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) { bcma_pcicore_serdes_workaround(pc); } -static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -{ - struct bcma_bus *bus = pc->core->bus; - u16 chipid_top; - - chipid_top = (bus->chipinfo.id & 0xFF00); - if (chipid_top != 0x4700 && - chipid_top != 0x5300) - return false; - -#ifdef CONFIG_SSB_DRIVER_PCICORE - if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) - return false; -#endif /* CONFIG_SSB_DRIVER_PCICORE */ - -#if 0 - /* TODO: on BCMA we use address from EROM instead of magic formula */ - u32 tmp; - return !mips_busprobe32(tmp, (bus->mmio + - (pc->core->core_index * BCMA_CORE_SIZE))); -#endif - - return true; -} - -void bcma_core_pci_init(struct bcma_drv_pci *pc) +void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) { if (pc->setup_done) return; - if (bcma_core_pci_is_in_hostmode(pc)) { #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + pc->hostmode = bcma_core_pci_is_in_hostmode(pc); + if (pc->hostmode) bcma_core_pci_hostmode_init(pc); -#else - pr_err("Driver compiled without support for hostmode PCI\n"); #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ - } else { - bcma_core_pci_clientmode_init(pc); - } - pc->setup_done = true; + if (!pc->hostmode) + bcma_core_pci_clientmode_init(pc); } int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -2,13 +2,588 @@ * Broadcom specific AMBA * PCI Core in hostmode * + * Copyright 2005 - 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch + * Copyright 2011, 2012, Hauke Mehrtens + * * Licensed under the GNU/GPL. See COPYING for details. */ #include "bcma_private.h" +#include +#include #include +#include + +/* Probe a 32bit value on the bus and catch bus exceptions. + * Returns nonzero on a bus exception. + * This is MIPS specific */ +#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) + +/* Assume one-hot slot wiring */ +#define BCMA_PCI_SLOT_MAX 16 +#define PCI_CONFIG_SPACE_SIZE 256 + +bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) +{ + struct bcma_bus *bus = pc->core->bus; + u16 chipid_top; + u32 tmp; + + chipid_top = (bus->chipinfo.id & 0xFF00); + if (chipid_top != 0x4700 && + chipid_top != 0x5300) + return false; + + if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { + pr_info("This PCI core is disabled and not working\n"); + return false; + } + + bcma_core_enable(pc->core, 0); + + return !mips_busprobe32(tmp, pc->core->io_addr); +} + +static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) +{ + pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); + return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); +} + +static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, + u32 data) +{ + pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); + pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); +} + +static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, + unsigned int func, unsigned int off) +{ + u32 addr = 0; + + /* Issue config commands only when the data link is up (atleast + * one external pcie device is present). + */ + if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) + & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) + goto out; + + /* Type 0 transaction */ + /* Slide the PCI window to the appropriate slot */ + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); + /* Calculate the address */ + addr = pc->host_controller->host_cfg_addr; + addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); + addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); + addr |= (off & ~3); + +out: + return addr; +} -void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) +static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, + unsigned int func, unsigned int off, + void *buf, int len) { - pr_err("No support for PCI core in hostmode yet\n"); + int err = -EINVAL; + u32 addr, val; + void __iomem *mmio = 0; + + WARN_ON(!pc->hostmode); + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; + if (dev == 0) { + /* we support only two functions on device 0 */ + if (func > 1) + return -EINVAL; + + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ + if (off >= PCI_CONFIG_SPACE_SIZE) { + addr = (func << 12); + addr |= (off & 0x0FFF); + val = bcma_pcie_read_config(pc, addr); + } else { + addr = BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); + addr |= (off & 0xfc); + val = pcicore_read32(pc, addr); + } + } else { + addr = bcma_get_cfgspace_addr(pc, dev, func, off); + if (unlikely(!addr)) + goto out; + err = -ENOMEM; + mmio = ioremap_nocache(addr, len); + if (!mmio) + goto out; + + if (mips_busprobe32(val, mmio)) { + val = 0xffffffff; + goto unmap; + } + + val = readl(mmio); + } + val >>= (8 * (off & 3)); + + switch (len) { + case 1: + *((u8 *)buf) = (u8)val; + break; + case 2: + *((u16 *)buf) = (u16)val; + break; + case 4: + *((u32 *)buf) = (u32)val; + break; + } + err = 0; +unmap: + if (mmio) + iounmap(mmio); +out: + return err; +} + +static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, + unsigned int func, unsigned int off, + const void *buf, int len) +{ + int err = -EINVAL; + u32 addr = 0, val = 0; + void __iomem *mmio = 0; + u16 chipid = pc->core->bus->chipinfo.id; + + WARN_ON(!pc->hostmode); + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; + if (dev == 0) { + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ + if (off < PCI_CONFIG_SPACE_SIZE) { + addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); + addr |= (off & 0xfc); + mmio = ioremap_nocache(addr, len); + if (!mmio) + goto out; + } + } else { + addr = bcma_get_cfgspace_addr(pc, dev, func, off); + if (unlikely(!addr)) + goto out; + err = -ENOMEM; + mmio = ioremap_nocache(addr, len); + if (!mmio) + goto out; + + if (mips_busprobe32(val, mmio)) { + val = 0xffffffff; + goto unmap; + } + } + + switch (len) { + case 1: + val = readl(mmio); + val &= ~(0xFF << (8 * (off & 3))); + val |= *((const u8 *)buf) << (8 * (off & 3)); + break; + case 2: + val = readl(mmio); + val &= ~(0xFFFF << (8 * (off & 3))); + val |= *((const u16 *)buf) << (8 * (off & 3)); + break; + case 4: + val = *((const u32 *)buf); + break; + } + if (dev == 0 && !addr) { + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ + addr = (func << 12); + addr |= (off & 0x0FFF); + bcma_pcie_write_config(pc, addr, val); + } else { + writel(val, mmio); + + if (chipid == 0x4716 || chipid == 0x4748) + readl(mmio); + } + + err = 0; +unmap: + if (mmio) + iounmap(mmio); +out: + return err; +} + +static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, + unsigned int devfn, + int reg, int size, u32 *val) +{ + unsigned long flags; + int err; + struct bcma_drv_pci *pc; + struct bcma_drv_pci_host *pc_host; + + pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); + pc = pc_host->pdev; + + spin_lock_irqsave(&pc_host->cfgspace_lock, flags); + err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), + PCI_FUNC(devfn), reg, val, size); + spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); + + return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, + unsigned int devfn, + int reg, int size, u32 val) +{ + unsigned long flags; + int err; + struct bcma_drv_pci *pc; + struct bcma_drv_pci_host *pc_host; + + pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); + pc = pc_host->pdev; + + spin_lock_irqsave(&pc_host->cfgspace_lock, flags); + err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), + PCI_FUNC(devfn), reg, &val, size); + spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); + + return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +/* return cap_offset if requested capability exists in the PCI config space */ +static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, + unsigned int dev, + unsigned int func, u8 req_cap_id, + unsigned char *buf, u32 *buflen) +{ + u8 cap_id; + u8 cap_ptr = 0; + u32 bufsize; + u8 byte_val; + + /* check for Header type 0 */ + bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, + sizeof(u8)); + if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) + return cap_ptr; + + /* check if the capability pointer field exists */ + bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, + sizeof(u8)); + if (!(byte_val & PCI_STATUS_CAP_LIST)) + return cap_ptr; + + /* check if the capability pointer is 0x00 */ + bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, + sizeof(u8)); + if (cap_ptr == 0x00) + return cap_ptr; + + /* loop thr'u the capability list and see if the requested capabilty + * exists */ + bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); + while (cap_id != req_cap_id) { + bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, + sizeof(u8)); + if (cap_ptr == 0x00) + return cap_ptr; + bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, + sizeof(u8)); + } + + /* found the caller requested capability */ + if ((buf != NULL) && (buflen != NULL)) { + u8 cap_data; + + bufsize = *buflen; + if (!bufsize) + return cap_ptr; + + *buflen = 0; + + /* copy the cpability data excluding cap ID and next ptr */ + cap_data = cap_ptr + 2; + if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) + bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; + *buflen = bufsize; + while (bufsize--) { + bcma_extpci_read_config(pc, dev, func, cap_data, buf, + sizeof(u8)); + cap_data++; + buf++; + } + } + + return cap_ptr; +} + +/* If the root port is capable of returning Config Request + * Retry Status (CRS) Completion Status to software then + * enable the feature. + */ +static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) +{ + u8 cap_ptr, root_ctrl, root_cap, dev; + u16 val16; + int i; + + cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, + NULL); + root_cap = cap_ptr + PCI_EXP_RTCAP; + bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); + if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { + /* Enable CRS software visibility */ + root_ctrl = cap_ptr + PCI_EXP_RTCTL; + val16 = PCI_EXP_RTCTL_CRSSVE; + bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, + sizeof(u16)); + + /* Initiate a configuration request to read the vendor id + * field of the device function's config space header after + * 100 ms wait time from the end of Reset. If the device is + * not done with its internal initialization, it must at + * least return a completion TLP, with a completion status + * of "Configuration Request Retry Status (CRS)". The root + * complex must complete the request to the host by returning + * a read-data value of 0001h for the Vendor ID field and + * all 1s for any additional bytes included in the request. + * Poll using the config reads for max wait time of 1 sec or + * until we receive the successful completion status. Repeat + * the procedure for all the devices. + */ + for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { + for (i = 0; i < 100000; i++) { + bcma_extpci_read_config(pc, dev, 0, + PCI_VENDOR_ID, &val16, + sizeof(val16)); + if (val16 != 0x1) + break; + udelay(10); + } + if (val16 == 0x1) + pr_err("PCI: Broken device in slot %d\n", dev); + } + } +} + +void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) +{ + struct bcma_bus *bus = pc->core->bus; + struct bcma_drv_pci_host *pc_host; + u32 tmp; + u32 pci_membase_1G; + unsigned long io_map_base; + + pr_info("PCIEcore in host mode found\n"); + + pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); + if (!pc_host) { + pr_err("can not allocate memory"); + return; + } + + pc->host_controller = pc_host; + pc_host->pci_controller.io_resource = &pc_host->io_resource; + pc_host->pci_controller.mem_resource = &pc_host->mem_resource; + pc_host->pci_controller.pci_ops = &pc_host->pci_ops; + pc_host->pdev = pc; + + pci_membase_1G = BCMA_SOC_PCI_DMA; + pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; + + pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; + pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; + + pc_host->mem_resource.name = "BCMA PCIcore external memory", + pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; + pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; + pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; + + pc_host->io_resource.name = "BCMA PCIcore external I/O", + pc_host->io_resource.start = 0x100; + pc_host->io_resource.end = 0x7FF; + pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; + + /* Reset RC */ + udelay(3000); + pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); + udelay(1000); + pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | + BCMA_CORE_PCI_CTL_RST_OE); + + /* 64 MB I/O access window. On 4716, use + * sbtopcie0 to access the device registers. We + * can't use address match 2 (1 GB window) region + * as mips can't generate 64-bit address on the + * backplane. + */ + if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { + pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; + pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + + BCMA_SOC_PCI_MEM_SZ - 1; + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); + } else if (bus->chipinfo.id == 0x5300) { + tmp = BCMA_CORE_PCI_SBTOPCI_MEM; + tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; + tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; + if (pc->core->core_unit == 0) { + pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; + pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + + BCMA_SOC_PCI_MEM_SZ - 1; + pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + tmp | BCMA_SOC_PCI_MEM); + } else if (pc->core->core_unit == 1) { + pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; + pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + + BCMA_SOC_PCI_MEM_SZ - 1; + pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; + pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + tmp | BCMA_SOC_PCI1_MEM); + } + } else + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + BCMA_CORE_PCI_SBTOPCI_IO); + + /* 64 MB configuration access window */ + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); + + /* 1 GB memory access window */ + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, + BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); + + + /* As per PCI Express Base Spec 1.1 we need to wait for + * at least 100 ms from the end of a reset (cold/warm/hot) + * before issuing configuration requests to PCI Express + * devices. + */ + udelay(100000); + + bcma_core_pci_enable_crs(pc); + + /* Enable PCI bridge BAR0 memory & master access */ + tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); + + /* Enable PCI interrupts */ + pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); + + /* Ok, ready to run, register it to the system. + * The following needs change, if we want to port hostmode + * to non-MIPS platform. */ + io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, + 0x04000000); + pc_host->pci_controller.io_map_base = io_map_base; + set_io_port_base(pc_host->pci_controller.io_map_base); + /* Give some time to the PCI controller to configure itself with the new + * values. Not waiting at this point causes crashes of the machine. */ + mdelay(10); + register_pci_controller(&pc_host->pci_controller); + return; +} + +/* Early PCI fixup for a device on the PCI-core bridge. */ +static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) +{ + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ + return; + } + if (PCI_SLOT(dev->devfn) != 0) + return; + + pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); + + /* Enable PCI bridge bus mastering and memory space */ + pci_set_master(dev); + if (pcibios_enable_device(dev, ~0) < 0) { + pr_err("PCI: BCMA bridge enable failed\n"); + return; + } + + /* Enable PCI bridge BAR1 prefetch and burst */ + pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); +} +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); + +/* Early PCI fixup for all PCI-cores to set the correct memory address. */ +static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) +{ + struct resource *res; + int pos; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ + return; + } + if (PCI_SLOT(dev->devfn) == 0) + return; + + pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); + + for (pos = 0; pos < 6; pos++) { + res = &dev->resource[pos]; + if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) + pci_assign_resource(dev, pos); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); + +/* This function is called when doing a pci_enable_device(). + * We must first check if the device is a device on the PCI-core bridge. */ +int bcma_core_pci_plat_dev_init(struct pci_dev *dev) +{ + struct bcma_drv_pci_host *pc_host; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; + } + pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, + pci_ops); + + pr_info("PCI: Fixing up device %s\n", pci_name(dev)); + + /* Fix up interrupt lines */ + dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + + return 0; +} +EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); + +/* PCI device IRQ mapping. */ +int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) +{ + struct bcma_drv_pci_host *pc_host; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; + } + + pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, + pci_ops); + return bcma_core_mips_irq(pc_host->pdev->core) + 2; } +EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c @@ -154,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci .awrite32 = bcma_host_pci_awrite32, }; -static int bcma_host_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) +static int __devinit bcma_host_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) { struct bcma_bus *bus; int err = -ENOMEM; --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -13,6 +13,12 @@ MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); MODULE_LICENSE("GPL"); +/* contains the number the next bus should get. */ +static unsigned int bcma_bus_next_num = 0; + +/* bcma_buses_mutex locks the bcma_bus_next_num */ +static DEFINE_MUTEX(bcma_buses_mutex); + static int bcma_bus_match(struct device *dev, struct device_driver *drv); static int bcma_device_probe(struct device *dev); static int bcma_device_remove(struct device *dev); @@ -55,7 +61,7 @@ static struct bus_type bcma_bus_type = { .dev_attrs = bcma_device_attrs, }; -static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) +struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) { struct bcma_device *core; @@ -65,6 +71,7 @@ static struct bcma_device *bcma_find_cor } return NULL; } +EXPORT_SYMBOL_GPL(bcma_find_core); static void bcma_release_core_dev(struct device *dev) { @@ -93,7 +100,7 @@ static int bcma_register_cores(struct bc core->dev.release = bcma_release_core_dev; core->dev.bus = &bcma_bus_type; - dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); + dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); switch (bus->hosttype) { case BCMA_HOSTTYPE_PCI: @@ -132,11 +139,15 @@ static void bcma_unregister_cores(struct } } -int bcma_bus_register(struct bcma_bus *bus) +int __devinit bcma_bus_register(struct bcma_bus *bus) { int err; struct bcma_device *core; + mutex_lock(&bcma_buses_mutex); + bus->num = bcma_bus_next_num++; + mutex_unlock(&bcma_buses_mutex); + /* Scan for devices (cores) */ err = bcma_bus_scan(bus); if (err) { --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c @@ -212,6 +212,17 @@ static struct bcma_device *bcma_find_cor return NULL; } +static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) +{ + struct bcma_device *core; + + list_for_each_entry_reverse(core, &bus->cores, list) { + if (core->id.id == coreid) + return core; + } + return NULL; +} + static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, struct bcma_device_id *match, int core_num, struct bcma_device *core) @@ -353,6 +364,7 @@ static int bcma_get_next_core(struct bcm void bcma_init_bus(struct bcma_bus *bus) { s32 tmp; + struct bcma_chipinfo *chipinfo = &(bus->chipinfo); if (bus->init_done) return; @@ -363,9 +375,12 @@ void bcma_init_bus(struct bcma_bus *bus) bcma_scan_switch_core(bus, BCMA_ADDR_BASE); tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); - bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; - bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; - bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; + chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; + pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", + chipinfo->id, chipinfo->rev, chipinfo->pkg); + bus->init_done = true; } @@ -392,6 +407,7 @@ int bcma_bus_scan(struct bcma_bus *bus) bcma_scan_switch_core(bus, erombase); while (eromptr < eromend) { + struct bcma_device *other_core; struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); if (!core) return -ENOMEM; @@ -414,6 +430,8 @@ int bcma_bus_scan(struct bcma_bus *bus) core->core_index = core_num++; bus->nr_cores++; + other_core = bcma_find_core_reverse(bus, core->id.id); + core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; pr_info("Core %d found: %s " "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -2,6 +2,8 @@ * Broadcom specific AMBA * SPROM reading * + * Copyright 2011, 2012, Hauke Mehrtens + * * Licensed under the GNU/GPL. See COPYING for details. */ @@ -14,7 +16,57 @@ #include #include -#define SPOFF(offset) ((offset) / sizeof(u16)) +static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); + +/** + * bcma_arch_register_fallback_sprom - Registers a method providing a + * fallback SPROM if no SPROM is found. + * + * @sprom_callback: The callback function. + * + * With this function the architecture implementation may register a + * callback handler which fills the SPROM data structure. The fallback is + * used for PCI based BCMA devices, where no valid SPROM can be found + * in the shadow registers and to provide the SPROM for SoCs where BCMA is + * to controll the system bus. + * + * This function is useful for weird architectures that have a half-assed + * BCMA device hardwired to their PCI bus. + * + * This function is available for architecture code, only. So it is not + * exported. + */ +int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, + struct ssb_sprom *out)) +{ + if (get_fallback_sprom) + return -EEXIST; + get_fallback_sprom = sprom_callback; + + return 0; +} + +static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, + struct ssb_sprom *out) +{ + int err; + + if (!get_fallback_sprom) { + err = -ENOENT; + goto fail; + } + + err = get_fallback_sprom(bus, out); + if (err) + goto fail; + + pr_debug("Using SPROM revision %d provided by" + " platform.\n", bus->sprom.revision); + return 0; +fail: + pr_warn("Using fallback SPROM failed (err %d)\n", err); + return err; +} /************************************************** * R/W ops. @@ -124,10 +176,21 @@ static int bcma_sprom_valid(const u16 *s * SPROM extraction. **************************************************/ +#define SPOFF(offset) ((offset) / sizeof(u16)) + +#define SPEX(_field, _offset, _mask, _shift) \ + bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) + static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) { - u16 v; + u16 v, o; int i; + u16 pwr_info_offset[] = { + SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, + SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 + }; + BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != + ARRAY_SIZE(bus->sprom.core_pwr_info)); bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; @@ -137,85 +200,229 @@ static void bcma_sprom_extract_r8(struct *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); } - bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; + SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); - bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & - SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; - bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & - SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; - bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & - SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; - bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & - SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; - - bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & - SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; - bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & - SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; - bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & - SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; - bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & - SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; - - bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & - SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; - bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & - SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; - bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & - SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; - bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & - SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; - - bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & - SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; - bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & - SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; - bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & - SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; - bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & - SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; - - bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; - bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; - bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; - bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; - - bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; - - bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & - SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; - bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & - SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; - bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & - SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; - bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & - SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; - bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & - SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; - - bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & - SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; - bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & - SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; - bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & - SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; - bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & - SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; - bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & - SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; + SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, + SSB_SPROM4_TXPID2G0_SHIFT); + SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, + SSB_SPROM4_TXPID2G1_SHIFT); + SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, + SSB_SPROM4_TXPID2G2_SHIFT); + SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, + SSB_SPROM4_TXPID2G3_SHIFT); + + SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, + SSB_SPROM4_TXPID5GL0_SHIFT); + SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, + SSB_SPROM4_TXPID5GL1_SHIFT); + SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, + SSB_SPROM4_TXPID5GL2_SHIFT); + SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, + SSB_SPROM4_TXPID5GL3_SHIFT); + + SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, + SSB_SPROM4_TXPID5G0_SHIFT); + SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, + SSB_SPROM4_TXPID5G1_SHIFT); + SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, + SSB_SPROM4_TXPID5G2_SHIFT); + SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, + SSB_SPROM4_TXPID5G3_SHIFT); + + SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, + SSB_SPROM4_TXPID5GH0_SHIFT); + SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, + SSB_SPROM4_TXPID5GH1_SHIFT); + SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, + SSB_SPROM4_TXPID5GH2_SHIFT); + SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, + SSB_SPROM4_TXPID5GH3_SHIFT); + + SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); + SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); + SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); + + SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); + + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; + SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, + SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); + SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, + SSB_SPROM8_2G_MAXP, 0); + + SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); + SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); + SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); + + SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, + SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); + SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, + SSB_SPROM8_5G_MAXP, 0); + SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, + SSB_SPROM8_5GH_MAXP, 0); + SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, + SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); + + SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); + SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); + SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); + SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); + SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); + SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); + SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); + SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); + SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); + } + + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, + SSB_SROM8_FEM_TSSIPOS_SHIFT); + SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, + SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); + SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, + SSB_SROM8_FEM_PDET_RANGE_SHIFT); + SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, + SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, + SSB_SROM8_FEM_ANTSWLUT_SHIFT); + + SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, + SSB_SROM8_FEM_TSSIPOS_SHIFT); + SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, + SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); + SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, + SSB_SROM8_FEM_PDET_RANGE_SHIFT); + SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, + SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, + SSB_SROM8_FEM_ANTSWLUT_SHIFT); +} + +/* + * Indicates the presence of external SPROM. + */ +static bool bcma_sprom_ext_available(struct bcma_bus *bus) +{ + u32 chip_status; + u32 srom_control; + u32 present_mask; + + if (bus->drv_cc.core->id.rev >= 31) { + if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) + return false; + + srom_control = bcma_read32(bus->drv_cc.core, + BCMA_CC_SROM_CONTROL); + return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; + } + + /* older chipcommon revisions use chip status register */ + chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); + switch (bus->chipinfo.id) { + case 0x4313: + present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; + break; + + case 0x4331: + present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; + break; + + default: + return true; + } + + return chip_status & present_mask; +} + +/* + * Indicates that on-chip OTP memory is present and enabled. + */ +static bool bcma_sprom_onchip_available(struct bcma_bus *bus) +{ + u32 chip_status; + u32 otpsize = 0; + bool present; + + chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); + switch (bus->chipinfo.id) { + case 0x4313: + present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; + break; + + case 0x4331: + present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; + break; + + case 43224: + case 43225: + /* for these chips OTP is always available */ + present = true; + break; + + default: + present = false; + break; + } + + if (present) { + otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; + otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; + } + + return otpsize != 0; +} + +/* + * Verify OTP is filled and determine the byte + * offset where SPROM data is located. + * + * On error, returns 0; byte offset otherwise. + */ +static int bcma_sprom_onchip_offset(struct bcma_bus *bus) +{ + struct bcma_device *cc = bus->drv_cc.core; + u32 offset; + + /* verify OTP status */ + if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) + return 0; + + /* obtain bit offset from otplayout register */ + offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); + return BCMA_CC_SPROM + (offset >> 3); } int bcma_sprom_get(struct bcma_bus *bus) { - u16 offset; + u16 offset = BCMA_CC_SPROM; u16 *sprom; int err = 0; if (!bus->drv_cc.core) return -EOPNOTSUPP; - if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) - return -ENOENT; + if (!bcma_sprom_ext_available(bus)) { + /* + * External SPROM takes precedence so check + * on-chip OTP only when no external SPROM + * is present. + */ + if (bcma_sprom_onchip_available(bus)) { + /* determine offset */ + offset = bcma_sprom_onchip_offset(bus); + } + if (!offset) { + /* + * Maybe there is no SPROM on the device? + * Now we ask the arch code if there is some sprom + * available for this device in some other storage. + */ + err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); + return err; + } + } sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); @@ -225,11 +432,7 @@ int bcma_sprom_get(struct bcma_bus *bus) if (bus->chipinfo.id == 0x4331) bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); - /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). - * According to brcm80211 this applies to cards with PCIe rev >= 6 - * TODO: understand this condition and use it */ - offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : - BCMA_CC_SPROM_PCIE6; + pr_debug("SPROM offset 0x%x\n", offset); bcma_sprom_read(bus, offset, sprom); if (bus->chipinfo.id == 0x4331) --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -136,6 +136,7 @@ struct bcma_device { bool dev_registered; u8 core_index; + u8 core_unit; u32 addr; u32 wrap; @@ -175,6 +176,12 @@ int __bcma_driver_register(struct bcma_d extern void bcma_driver_unregister(struct bcma_driver *drv); +/* Set a fallback SPROM. + * See kdoc at the function definition for complete documentation. */ +extern int bcma_arch_register_fallback_sprom( + int (*sprom_callback)(struct bcma_bus *bus, + struct ssb_sprom *out)); + struct bcma_bus { /* The MMIO area. */ void __iomem *mmio; @@ -195,6 +202,7 @@ struct bcma_bus { struct list_head cores; u8 nr_cores; u8 init_done:1; + u8 num; struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; @@ -282,6 +290,7 @@ static inline void bcma_maskset16(struct bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); } +extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); extern bool bcma_core_is_enabled(struct bcma_device *core); extern void bcma_core_disable(struct bcma_device *core, u32 flags); extern int bcma_core_enable(struct bcma_device *core, u32 flags); --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -56,6 +56,9 @@ #define BCMA_CC_OTPS_HW_PROTECT 0x00000001 #define BCMA_CC_OTPS_SW_PROTECT 0x00000002 #define BCMA_CC_OTPS_CID_PROTECT 0x00000004 +#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ +#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 +#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ #define BCMA_CC_OTPC 0x0014 /* OTP control */ #define BCMA_CC_OTPC_RECWAIT 0xFF000000 #define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 @@ -72,6 +75,8 @@ #define BCMA_CC_OTPP_READ 0x40000000 #define BCMA_CC_OTPP_START 0x80000000 #define BCMA_CC_OTPP_BUSY 0x80000000 +#define BCMA_CC_OTPL 0x001C /* OTP layout */ +#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ #define BCMA_CC_IRQSTAT 0x0020 #define BCMA_CC_IRQMASK 0x0024 #define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ @@ -79,6 +84,10 @@ #define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ #define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ #define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ +#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 +#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 +#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 +#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 @@ -181,6 +190,22 @@ #define BCMA_CC_FLASH_CFG 0x0128 #define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ #define BCMA_CC_FLASH_WAITCNT 0x012C +#define BCMA_CC_SROM_CONTROL 0x0190 +#define BCMA_CC_SROM_CONTROL_START 0x80000000 +#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 +#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 +#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 +#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 +#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 +#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 +#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 +#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 +#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 +#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 +#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 +#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 +#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 +#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 /* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define BCMA_CC_UART0_DATA 0x0300 @@ -240,7 +265,6 @@ #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ -#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ /* Divider allocation in 4716/47162/5356 */ #define BCMA_CC_PMU5_MAINPLL_CPU 1 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -53,6 +53,35 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 +#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ +#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ +#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ +#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ +#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 +#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ +#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ +#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ +#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ +#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ +#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ +#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ +#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ +#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ +#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ +#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ +#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ +#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ +#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ +#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ +#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ @@ -72,20 +101,114 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ +/* PCIE protocol PHY diagnostic registers */ +#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ +#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ +#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ +#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ +#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ +#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ +#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ +#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ +#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ +#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ +#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ +#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ +#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ +#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ +#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ +#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ +#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ + +/* PCIE protocol DLLP diagnostic registers */ +#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ +#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ +#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ +#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) +#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ +#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ +#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ +#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ +#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ +#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ +#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ +#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ +#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ +#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ +#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ +#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ +#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ +#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ + +/* SERDES RX registers */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ +#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ +#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ +#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ + +/* SERDES PLL registers */ +#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ +#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ + /* PCIcore specific boardflags */ #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ +/* PCIE Config space accessing MACROS */ +#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ +#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ +#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ +#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ + +#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ +#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ +#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ +#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ + +/* PCIE Root Capability Register bits (Host mode only) */ +#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 + +struct bcma_drv_pci; + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE +struct bcma_drv_pci_host { + struct bcma_drv_pci *pdev; + + u32 host_cfg_addr; + spinlock_t cfgspace_lock; + + struct pci_controller pci_controller; + struct pci_ops pci_ops; + struct resource mem_resource; + struct resource io_resource; +}; +#endif + struct bcma_drv_pci { struct bcma_device *core; u8 setup_done:1; + u8 hostmode:1; + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + struct bcma_drv_pci_host *host_controller; +#endif }; /* Register access */ #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) -extern void bcma_core_pci_init(struct bcma_drv_pci *pc); +extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable); +extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); +extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); + #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -56,4 +56,31 @@ #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ +/* SiliconBackplane Address Map. + * All regions may not exist on all chips. + */ +#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ +#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ +#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) +#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ +#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ +#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ + + +#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ +#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ +#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ +#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), low 32 bits + */ +#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), high 32 bits + */ + +#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ +#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ +#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), high 32 bits + */ + #endif /* LINUX_BCMA_REGS_H_ */