--- a/drivers/bcma/Kconfig +++ b/drivers/bcma/Kconfig @@ -13,6 +13,11 @@ config BCMA Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture. +# Support for Block-I/O. SELECT this from the driver that needs it. +config BCMA_BLOCKIO + bool + depends on BCMA + config BCMA_HOST_PCI_POSSIBLE bool depends on BCMA && PCI = y --- a/drivers/bcma/Makefile +++ b/drivers/bcma/Makefile @@ -1,4 +1,4 @@ -bcma-y += main.o scan.o core.o +bcma-y += main.o scan.o core.o sprom.o bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o bcma-y += driver_pci.o bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -13,12 +13,15 @@ struct bcma_bus; /* main.c */ -extern int bcma_bus_register(struct bcma_bus *bus); -extern void bcma_bus_unregister(struct bcma_bus *bus); +int bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); /* scan.c */ int bcma_bus_scan(struct bcma_bus *bus); +/* sprom.c */ +int bcma_sprom_get(struct bcma_bus *bus); + #ifdef CONFIG_BCMA_HOST_PCI /* host_pci.c */ extern int __init bcma_host_pci_init(void); --- a/drivers/bcma/core.c +++ b/drivers/bcma/core.c @@ -19,7 +19,7 @@ bool bcma_core_is_enabled(struct bcma_de } EXPORT_SYMBOL_GPL(bcma_core_is_enabled); -static void bcma_core_disable(struct bcma_device *core, u32 flags) +void bcma_core_disable(struct bcma_device *core, u32 flags) { if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) return; @@ -31,6 +31,7 @@ static void bcma_core_disable(struct bcm bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); udelay(1); } +EXPORT_SYMBOL_GPL(bcma_core_disable); int bcma_core_enable(struct bcma_device *core, u32 flags) { --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -53,6 +53,7 @@ static void bcma_pmu_resources_init(stru max_msk = 0xFFFF; break; case 43224: + case 43225: break; default: pr_err("PMU resource config unknown for device 0x%04X\n", @@ -74,6 +75,7 @@ void bcma_pmu_swreg_init(struct bcma_drv case 0x4313: case 0x4331: case 43224: + case 43225: break; default: pr_err("PMU switch/regulators init unknown for device " @@ -96,11 +98,13 @@ void bcma_pmu_workarounds(struct bcma_dr if (bus->chipinfo.rev == 0) { pr_err("Workarounds for 43224 rev 0 not fully " "implemented\n"); - bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0); } else { bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); } break; + case 43225: + break; default: pr_err("Workarounds unknown for device 0x%04X\n", bus->chipinfo.id); --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -161,3 +161,27 @@ void bcma_core_pci_init(struct bcma_drv_ { bcma_pcicore_serdes_workaround(pc); } + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, + bool enable) +{ + struct pci_dev *pdev = pc->core->bus->host_pci; + u32 coremask, tmp; + int err; + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) + goto out; + + coremask = BIT(core->core_index) << 8; + if (enable) + tmp |= coremask; + else + tmp &= ~coremask; + + err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); + +out: + return err; +} +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c @@ -65,6 +65,54 @@ static void bcma_host_pci_write32(struct iowrite32(value, core->bus->mmio + offset); } +#ifdef CONFIG_BCMA_BLOCKIO +void bcma_host_pci_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + void __iomem *addr = core->bus->mmio + offset; + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + switch (reg_width) { + case sizeof(u8): + ioread8_rep(addr, buffer, count); + break; + case sizeof(u16): + WARN_ON(count & 1); + ioread16_rep(addr, buffer, count >> 1); + break; + case sizeof(u32): + WARN_ON(count & 3); + ioread32_rep(addr, buffer, count >> 2); + break; + default: + WARN_ON(1); + } +} + +void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + void __iomem *addr = core->bus->mmio + offset; + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + switch (reg_width) { + case sizeof(u8): + iowrite8_rep(addr, buffer, count); + break; + case sizeof(u16): + WARN_ON(count & 1); + iowrite16_rep(addr, buffer, count >> 1); + break; + case sizeof(u32): + WARN_ON(count & 3); + iowrite32_rep(addr, buffer, count >> 2); + break; + default: + WARN_ON(1); + } +} +#endif + static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset) { if (core->bus->mapped_core != core) @@ -87,6 +135,10 @@ const struct bcma_host_ops bcma_host_pci .write8 = bcma_host_pci_write8, .write16 = bcma_host_pci_write16, .write32 = bcma_host_pci_write32, +#ifdef CONFIG_BCMA_BLOCKIO + .block_read = bcma_host_pci_block_read, + .block_write = bcma_host_pci_block_write, +#endif .aread32 = bcma_host_pci_aread32, .awrite32 = bcma_host_pci_awrite32, }; @@ -175,6 +227,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, { 0, }, }; --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -7,6 +7,7 @@ #include "bcma_private.h" #include +#include MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); MODULE_LICENSE("GPL"); @@ -89,6 +90,8 @@ static int bcma_register_cores(struct bc switch (bus->hosttype) { case BCMA_HOSTTYPE_PCI: core->dev.parent = &bus->host_pci->dev; + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; break; case BCMA_HOSTTYPE_NONE: case BCMA_HOSTTYPE_SDIO: @@ -144,6 +147,13 @@ int bcma_bus_register(struct bcma_bus *b bcma_core_pci_init(&bus->drv_pci); } + /* Try to get SPROM */ + err = bcma_sprom_get(bus); + if (err) { + pr_err("Failed to get SPROM: %d\n", err); + return -ENOENT; + } + /* Register found cores */ bcma_register_cores(bus); @@ -151,13 +161,11 @@ int bcma_bus_register(struct bcma_bus *b return 0; } -EXPORT_SYMBOL_GPL(bcma_bus_register); void bcma_bus_unregister(struct bcma_bus *bus) { bcma_unregister_cores(bus); } -EXPORT_SYMBOL_GPL(bcma_bus_unregister); int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) { --- /dev/null +++ b/drivers/bcma/sprom.c @@ -0,0 +1,162 @@ +/* + * Broadcom specific AMBA + * SPROM reading + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" + +#include +#include +#include +#include +#include +#include + +#define SPOFF(offset) ((offset) / sizeof(u16)) + +/************************************************** + * R/W ops. + **************************************************/ + +static void bcma_sprom_read(struct bcma_bus *bus, u16 *sprom) +{ + int i; + for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++) + sprom[i] = bcma_read16(bus->drv_cc.core, + BCMA_CC_SPROM + (i * 2)); +} + +/************************************************** + * Validation. + **************************************************/ + +static inline u8 bcma_crc8(u8 crc, u8 data) +{ + /* Polynomial: x^8 + x^7 + x^6 + x^4 + x^2 + 1 */ + static const u8 t[] = { + 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, + 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, + 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, + 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, + 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, + 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, + 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, + 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, + 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, + 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, + 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, + 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, + 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, + 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, + 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, + 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, + 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, + 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, + 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, + 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, + 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, + 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, + 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, + 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, + 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, + 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, + 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, + 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, + 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, + 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, + 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, + 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F, + }; + return t[crc ^ data]; +} + +static u8 bcma_sprom_crc(const u16 *sprom) +{ + int word; + u8 crc = 0xFF; + + for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) { + crc = bcma_crc8(crc, sprom[word] & 0x00FF); + crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8); + } + crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF); + crc ^= 0xFF; + + return crc; +} + +static int bcma_sprom_check_crc(const u16 *sprom) +{ + u8 crc; + u8 expected_crc; + u16 tmp; + + crc = bcma_sprom_crc(sprom); + tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC; + expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT; + if (crc != expected_crc) + return -EPROTO; + + return 0; +} + +static int bcma_sprom_valid(const u16 *sprom) +{ + u16 revision; + int err; + + err = bcma_sprom_check_crc(sprom); + if (err) + return err; + + revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; + if (revision != 8) { + pr_err("Unsupported SPROM revision: %d\n", revision); + return -ENOENT; + } + + return 0; +} + +/************************************************** + * SPROM extraction. + **************************************************/ + +static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) +{ + u16 v; + int i; + + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } +} + +int bcma_sprom_get(struct bcma_bus *bus) +{ + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); + if (!sprom) + return -ENOMEM; + + bcma_sprom_read(bus, sprom); + + err = bcma_sprom_valid(sprom); + if (err) + goto out; + + bcma_sprom_extract_r8(bus, sprom); + +out: + kfree(sprom); + return err; +} --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -6,6 +6,7 @@ #include #include +#include /* SPROM sharing */ #include "bcma_regs.h" @@ -31,6 +32,12 @@ struct bcma_host_ops { void (*write8)(struct bcma_device *core, u16 offset, u8 value); void (*write16)(struct bcma_device *core, u16 offset, u16 value); void (*write32)(struct bcma_device *core, u16 offset, u32 value); +#ifdef CONFIG_BCMA_BLOCKIO + void (*block_read)(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width); + void (*block_write)(struct bcma_device *core, const void *buffer, + size_t count, u16 offset, u8 reg_width); +#endif /* Agent ops */ u32 (*aread32)(struct bcma_device *core, u16 offset); void (*awrite32)(struct bcma_device *core, u16 offset, u32 value); @@ -117,6 +124,8 @@ struct bcma_device { struct bcma_device_id id; struct device dev; + struct device *dma_dev; + unsigned int irq; bool dev_registered; u8 core_index; @@ -179,6 +188,10 @@ struct bcma_bus { struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; }; extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) @@ -208,6 +221,18 @@ void bcma_write32(struct bcma_device *co { core->bus->ops->write32(core, offset, value); } +#ifdef CONFIG_BCMA_BLOCKIO +extern inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_read(core, buffer, count, offset, reg_width); +} +extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_write(core, buffer, count, offset, reg_width); +} +#endif extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) { return core->bus->ops->aread32(core, offset); @@ -219,6 +244,7 @@ void bcma_awrite32(struct bcma_device *c } extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); extern int bcma_core_enable(struct bcma_device *core, u32 flags); #endif /* LINUX_BCMA_H_ */ --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -244,6 +244,7 @@ #define BCMA_CC_REGCTL_DATA 0x065C #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_SPROM 0x0830 /* SPROM beginning */ /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -85,5 +85,7 @@ struct bcma_drv_pci { #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) extern void bcma_core_pci_init(struct bcma_drv_pci *pc); +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); #endif /* LINUX_BCMA_DRIVER_PCI_H_ */