From c9e68ea1a541b9762ec0b656509aef3cdd75e035 Mon Sep 17 00:00:00 2001 From: Kurt Mahan Date: Mon, 19 Nov 2007 12:01:34 -0700 Subject: [PATCH] Add support for the M5445x ATA controller. LTIBName: m5445x-ata Signed-off-by: Kurt Mahan --- arch/m68k/coldfire/Makefile | 1 + arch/m68k/coldfire/head.S | 5 + arch/m68k/coldfire/mcf5445x-devices.c | 125 +++++ drivers/ata/Kconfig | 11 +- drivers/ata/Makefile | 2 +- drivers/ata/pata_fsl.c | 829 +++++++++++++++++++++++++++++++++ include/asm-m68k/pci.h | 10 +- include/linux/fsl_devices.h | 11 + 8 files changed, 990 insertions(+), 4 deletions(-) create mode 100644 arch/m68k/coldfire/mcf5445x-devices.c create mode 100644 drivers/ata/pata_fsl.c --- a/arch/m68k/coldfire/Makefile +++ b/arch/m68k/coldfire/Makefile @@ -9,3 +9,4 @@ ifneq ($(strip $(CONFIG_USB) $(CONFIG_US endif obj-$(CONFIG_PCI) += pci.o mcf5445x-pci.o iomap.o +obj-$(CONFIG_M54455) += mcf5445x-devices.o --- a/arch/m68k/coldfire/head.S +++ b/arch/m68k/coldfire/head.S @@ -374,6 +374,11 @@ ENTRY(__start) MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ 0, MMUDR_LK, %d0 + /* Map ATA registers -- sacrifice a data TLB due to the hw design */ + mmu_map (0x90000000), (0x90000000), 0, 0, \ + MMUTR_SG, MMUDR_SZ16M, MMUDR_DNCP, MMUDR_SP, MMUDR_R, MMUDR_W, \ + 0, MMUDR_LK, %d0 + /* Do unity mapping to enable the MMU. Map first 16 MB in place as code (delete TLBs after MMU is enabled and we are executing in high memory). */ --- /dev/null +++ b/arch/m68k/coldfire/mcf5445x-devices.c @@ -0,0 +1,125 @@ +/* + * arch/m68k/coldfire/mcf5445x-devices.c + * + * Coldfire M5445x Platform Device Configuration + * + * Based on the Freescale MXC devices.c + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Kurt Mahan + */ +#include +#include +#include +#include +#include + +#include +#include + +/* ATA Interrupt */ +#define IRQ_ATA (64 + 64 + 54) + +/* ATA Base */ +#define BASE_IO_ATA 0x90000000 + +#define ATA_IER MCF_REG08(BASE_IO_ATA+0x2c) /* int enable reg */ +#define ATA_ICR MCF_REG08(BASE_IO_ATA+0x30) /* int clear reg */ + +/* + * On-chip PATA + */ +#if defined(CONFIG_PATA_FSL) || defined(CONFIG_PATA_FSL_MODULE) +static int ata_init(struct platform_device *pdev) +{ + /* clear ints */ + ATA_IER = 0x00; + ATA_ICR = 0xff; + + /* setup shared pins */ + MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC & MCF_GPIO_PAR_FEC_FEC1_MASK) | + MCF_GPIO_PAR_FEC_FEC1_ATA; + + MCF_GPIO_PAR_FECI2C = (MCF_GPIO_PAR_FECI2C & + (MCF_GPIO_PAR_FECI2C_MDC1_MASK & + MCF_GPIO_PAR_FECI2C_MDIO1_MASK)) | + MCF_GPIO_PAR_FECI2C_MDC1_ATA_DIOR | + MCF_GPIO_PAR_FECI2C_MDIO1_ATA_DIOW; + + MCF_GPIO_PAR_ATA = MCF_GPIO_PAR_ATA_BUFEN | + MCF_GPIO_PAR_ATA_CS1 | + MCF_GPIO_PAR_ATA_CS0 | + MCF_GPIO_PAR_ATA_DA2 | + MCF_GPIO_PAR_ATA_DA1 | + MCF_GPIO_PAR_ATA_DA0 | + MCF_GPIO_PAR_ATA_RESET_RESET | + MCF_GPIO_PAR_ATA_DMARQ_DMARQ | + MCF_GPIO_PAR_ATA_IORDY_IORDY; + + MCF_GPIO_PAR_PCI = (MCF_GPIO_PAR_PCI & + (MCF_GPIO_PAR_PCI_GNT3_MASK & + MCF_GPIO_PAR_PCI_REQ3_MASK)) | + MCF_GPIO_PAR_PCI_GNT3_ATA_DMACK | + MCF_GPIO_PAR_PCI_REQ3_ATA_INTRQ; + + return 0; +} + +static void ata_exit(void) +{ + printk(KERN_INFO "** ata_exit\n"); +} + +static int ata_get_clk_rate(void) +{ + return MCF_BUSCLK; +} + +static struct fsl_ata_platform_data ata_data = { + .init = ata_init, + .exit = ata_exit, + .get_clk_rate = ata_get_clk_rate, +}; + +static struct resource pata_fsl_resources[] = { + [0] = { /* I/O */ + .start = BASE_IO_ATA, + .end = BASE_IO_ATA + 0x000000d8, + .flags = IORESOURCE_MEM, + }, + [2] = { /* IRQ */ + .start = IRQ_ATA, + .end = IRQ_ATA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pata_fsl_device = { + .name = "pata_fsl", + .id = -1, + .num_resources = ARRAY_SIZE(pata_fsl_resources), + .resource = pata_fsl_resources, + .dev = { + .platform_data = &ata_data, + .coherent_dma_mask = ~0, /* $$$ REVISIT */ + }, +}; + +static inline void mcf5445x_init_pata(void) +{ + (void)platform_device_register(&pata_fsl_device); +} +#else +static inline void mcf5445x_init_pata(void) +{ +} +#endif + +static int __init mcf5445x_init_devices(void) +{ + printk(KERN_INFO "MCF5445x INIT_DEVICES\n"); + mcf5445x_init_pata(); + + return 0; +} +arch_initcall(mcf5445x_init_devices); --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -6,7 +6,7 @@ menuconfig ATA tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" depends on HAS_IOMEM depends on BLOCK - depends on !(M32R || M68K) || BROKEN + depends on !M32R || BROKEN depends on !SUN4 || BROKEN select SCSI ---help--- @@ -679,4 +679,13 @@ config PATA_BF54X If unsure, say N. +config PATA_FSL + tristate "Freescale on-chip PATA support" + depends on (ARCH_MX3 || ARCH_MX27 || PPC_512x || M54455) + help + On Freescale processors, say Y here if you wish to use the on-chip + ATA interface. + + If you are unsure, say N to this. + endif # ATA --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -1,4 +1,3 @@ - obj-$(CONFIG_ATA) += libata.o obj-$(CONFIG_SATA_AHCI) += ahci.o @@ -71,6 +70,7 @@ obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o +obj-$(CONFIG_PATA_FSL) += pata_fsl.o # Should be last but two libata driver obj-$(CONFIG_PATA_ACPI) += pata_acpi.o # Should be last but one libata driver --- /dev/null +++ b/drivers/ata/pata_fsl.c @@ -0,0 +1,829 @@ +/* + * Freescale integrated PATA driver + */ + +/* + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_FSL_PATA_USE_DMA +#include +#endif + +#define DRV_NAME "pata_fsl" +#define DRV_VERSION "1.0" + +#ifdef CONFIG_M54455 +#define WRITE_ATA8(val, reg) \ + __raw_writeb(val, (ata_regs + reg)); +#define WRITE_ATA16(val, reg) \ + __raw_writew(val, (ata_regs + reg)); +#else +#define WRITE_ATA8(val, reg) \ + __raw_writel(val, (ata_regs + reg)); +#define WRITE_ATA16(val, reg) \ + __raw_writel(val, (ata_regs + reg)); +#endif + +struct pata_fsl_priv { +#ifdef CONFIG_FSL_PATA_USE_DMA + int ultra; +#endif + u8 *fsl_ata_regs; +#ifdef CONFIG_FSL_PATA_USE_DMA + int dma_rchan; + int dma_wchan; + int dma_done; + int dma_dir; +#endif +}; + +enum { + /* various constants */ + +#ifdef CONFIG_FSL_PATA_USE_DMA + FSL_ATA_MAX_SG_LEN = 65534, +#endif + + /* offsets to registers */ + + FSL_ATA_TIMING_REGS = 0x00, + FSL_ATA_FIFO_FILL = 0x20, + FSL_ATA_CONTROL = 0x24, + FSL_ATA_INT_PEND = 0x28, + FSL_ATA_INT_EN = 0x2C, + FSL_ATA_INT_CLEAR = 0x30, + FSL_ATA_FIFO_ALARM = 0x34, + FSL_ATA_DRIVE_DATA = 0xA0, + FSL_ATA_DRIVE_CONTROL = 0xD8, + + /* bits within FSL_ATA_CONTROL */ + + FSL_ATA_CTRL_FIFO_RST_B = 0x80, + FSL_ATA_CTRL_ATA_RST_B = 0x40, + FSL_ATA_CTRL_FIFO_TX_EN = 0x20, + FSL_ATA_CTRL_FIFO_RCV_EN = 0x10, + FSL_ATA_CTRL_DMA_PENDING = 0x08, + FSL_ATA_CTRL_DMA_ULTRA = 0x04, + FSL_ATA_CTRL_DMA_WRITE = 0x02, + FSL_ATA_CTRL_IORDY_EN = 0x01, + + /* bits within the interrupt control registers */ + + FSL_ATA_INTR_ATA_INTRQ1 = 0x80, + FSL_ATA_INTR_FIFO_UNDERFLOW = 0x40, + FSL_ATA_INTR_FIFO_OVERFLOW = 0x20, + FSL_ATA_INTR_CTRL_IDLE = 0x10, + FSL_ATA_INTR_ATA_INTRQ2 = 0x08, +}; + +/* + * This structure contains the timing parameters for + * ATA bus timing in the 5 PIO modes. The timings + * are in nanoseconds, and are converted to clock + * cycles before being stored in the ATA controller + * timing registers. + */ +static struct { + short t0, t1, t2_8, t2_16, t2i, t4, t9, tA; +} pio_specs[] = { + [0] = { + .t0 = 600, .t1 = 70, .t2_8 = 290, .t2_16 = 165, .t2i = 0, + .t4 = 30,.t9 = 20,.tA = 50 + }, + [1] = { + .t0 = 383, .t1 = 50, .t2_8 = 290, .t2_16 = 125, .t2i = 0, + .t4 = 20, .t9 = 15, .tA = 50 + }, + [2] = { + .t0 = 240, .t1 = 30, .t2_8 = 290, .t2_16 = 100, .t2i = 0, + .t4 = 15, .t9 = 10, .tA = 50 + }, + [3] = { + .t0 = 180, .t1 = 30, .t2_8 = 80, .t2_16 = 80, .t2i = 0, + .t4 = 10, .t9 = 10, .tA = 50 + }, + [4] = { + .t0 = 120, .t1 = 25, .t2_8 = 70, .t2_16 = 70, .t2i = 0, + .t4 = 10, .t9 = 10, .tA = 50 + }, +}; + +#define NR_PIO_SPECS (sizeof pio_specs / sizeof pio_specs[0]) + +/* + * This structure contains the timing parameters for + * ATA bus timing in the 3 MDMA modes. The timings + * are in nanoseconds, and are converted to clock + * cycles before being stored in the ATA controller + * timing registers. + */ +static struct { + short t0M, tD, tH, tJ, tKW, tM, tN, tJNH; +} mdma_specs[] = { + [0] = { + .t0M = 480, .tD = 215, .tH = 20, .tJ = 20, .tKW = 215, + .tM = 50, .tN = 15, .tJNH = 20 + }, + [1] = { + .t0M = 150, .tD = 80, .tH = 15, .tJ = 5, .tKW = 50, + .tM = 30, .tN = 10, .tJNH = 15 + }, + [2] = { + .t0M = 120, .tD = 70, .tH = 10, .tJ = 5, .tKW = 25, + .tM = 25, .tN = 10, .tJNH = 10 + }, +}; + +#define NR_MDMA_SPECS (sizeof mdma_specs / sizeof mdma_specs[0]) + +/* + * This structure contains the timing parameters for + * ATA bus timing in the 6 UDMA modes. The timings + * are in nanoseconds, and are converted to clock + * cycles before being stored in the ATA controller + * timing registers. + */ +static struct { + short t2CYC, tCYC, tDS, tDH, tDVS, tDVH, tCVS, tCVH, tFS_min, tLI_max, + tMLI, tAZ, tZAH, tENV_min, tSR, tRFS, tRP, tACK, tSS, tDZFS; +} udma_specs[] = { + [0] = { + .t2CYC = 235, .tCYC = 114, .tDS = 15, .tDH = 5, .tDVS = 70, + .tDVH = 6, .tCVS = 70, .tCVH = 6, .tFS_min = 0, + .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, + .tENV_min = 20, .tSR = 50, .tRFS = 75, .tRP = 160, + .tACK = 20, .tSS = 50, .tDZFS = 80 + }, + [1] = { + .t2CYC = 156, .tCYC = 75, .tDS = 10, .tDH = 5, .tDVS = 48, + .tDVH = 6, .tCVS = 48, .tCVH = 6, .tFS_min = 0, + .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, + .tENV_min = 20, .tSR = 30, .tRFS = 70, .tRP = 125, + .tACK = 20, .tSS = 50, .tDZFS = 63 + }, + [2] = { + .t2CYC = 117, .tCYC = 55, .tDS = 7, .tDH = 5, .tDVS = 34, + .tDVH = 6, .tCVS = 34, .tCVH = 6, .tFS_min = 0, + .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, + .tENV_min = 20, .tSR = 20, .tRFS = 60, .tRP = 100, + .tACK = 20, .tSS = 50, .tDZFS = 47 + }, + [3] = { + .t2CYC = 86, .tCYC = 39, .tDS = 7, .tDH = 5, .tDVS = 20, + .tDVH = 6, .tCVS = 20, .tCVH = 6, .tFS_min = 0, + .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, + .tENV_min = 20, .tSR = 20, .tRFS = 60, .tRP = 100, + .tACK = 20, .tSS = 50, .tDZFS = 35 + }, + [4] = { + .t2CYC = 57, .tCYC = 25, .tDS = 5, .tDH = 5, .tDVS = 7, + .tDVH = 6, .tCVS = 7, .tCVH = 6, .tFS_min = 0, + .tLI_max = 100, .tMLI = 20, .tAZ = 10, .tZAH = 20, + .tENV_min = 20, .tSR = 50, .tRFS = 60, .tRP = 100, + .tACK = 20, .tSS = 50, .tDZFS = 25 + }, + [5] = { + .t2CYC = 38, .tCYC = 17, .tDS = 4, .tDH = 5, .tDVS = 5, + .tDVH = 6, .tCVS = 10, .tCVH = 10, .tFS_min = 0, + .tLI_max = 75, .tMLI = 20, .tAZ = 10, .tZAH = 20, + .tENV_min = 20, .tSR = 20, .tRFS = 50, .tRP = 85, + .tACK = 20, .tSS = 50, .tDZFS = 40 + }, +}; + +#define NR_UDMA_SPECS (sizeof udma_specs / sizeof udma_specs[0]) + +struct fsl_ata_time_regs { + u8 time_off, time_on, time_1, time_2w; + u8 time_2r, time_ax, time_pio_rdx, time_4; + u8 time_9, time_m, time_jn, time_d; + u8 time_k, time_ack, time_env, time_rpx; + u8 time_zah, time_mlix, time_dvh, time_dzfs; + u8 time_dvs, time_cvh, time_ss, time_cyc; +}; + +static void update_timing_config(struct fsl_ata_time_regs *tp, struct ata_host *host) +{ + u32 *lp = (u32 *)tp; + struct pata_fsl_priv *priv = host->private_data; + u32 *ctlp = (u32 *)priv->fsl_ata_regs; + int i; + + /* + * JKM - this could have endianess issues on BE depending + * on how the controller is glued to the bus -- probably + * should rewrite this to write byte at a time. + */ + for (i = 0; i < 5; i++) { + __raw_writel(*lp, ctlp); + lp++; + ctlp++; + } + mb(); +} + +/*! + * Calculate values for the ATA bus timing registers and store + * them into the hardware. + * + * @param xfer_mode specifies XFER xfer_mode + * @param pdev specifies platform_device + * + * @return EINVAL speed out of range, or illegal mode + */ +static int set_ata_bus_timing(u8 xfer_mode, struct platform_device *pdev) +{ + struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) + pdev->dev.platform_data; + struct ata_host *host = dev_get_drvdata(&pdev->dev); + + /* get the bus clock cycle time, in ns */ + int T = 1 * 1000 * 1000 * 1000 / plat->get_clk_rate(); + struct fsl_ata_time_regs tr = {0}; + DPRINTK("clk_rate = %d T = %d\n",plat->get_clk_rate(), T); + + /* + * every mode gets the same t_off and t_on + */ + tr.time_off = 3; + tr.time_on = 3; + + if (xfer_mode >= XFER_UDMA_0) { + int speed = xfer_mode - XFER_UDMA_0; + if (speed >= NR_UDMA_SPECS) { + return -EINVAL; + } + tr.time_ack = (udma_specs[speed].tACK + T) / T; + tr.time_env = (udma_specs[speed].tENV_min + T) / T; + tr.time_rpx = (udma_specs[speed].tRP + T) / T + 2; + + tr.time_zah = (udma_specs[speed].tZAH + T) / T; + tr.time_mlix = (udma_specs[speed].tMLI + T) / T; + tr.time_dvh = (udma_specs[speed].tDVH + T) / T + 1; + tr.time_dzfs = (udma_specs[speed].tDZFS + T) / T; + + tr.time_dvs = (udma_specs[speed].tDVS + T) / T; + tr.time_cvh = (udma_specs[speed].tCVH + T) / T; + tr.time_ss = (udma_specs[speed].tSS + T) / T; + tr.time_cyc = (udma_specs[speed].tCYC + T) / T; + } else if (xfer_mode >= XFER_MW_DMA_0) { + int speed = xfer_mode - XFER_MW_DMA_0; + if (speed >= NR_MDMA_SPECS) { + return -EINVAL; + } + tr.time_m = (mdma_specs[speed].tM + T) / T; + tr.time_jn = (mdma_specs[speed].tJNH + T) / T; + tr.time_d = (mdma_specs[speed].tD + T) / T; + + tr.time_k = (mdma_specs[speed].tKW + T) / T; + } else { + int speed = xfer_mode - XFER_PIO_0; + if (speed >= NR_PIO_SPECS) { + return -EINVAL; + } + tr.time_1 = (pio_specs[speed].t1 + T) / T; + tr.time_2w = (pio_specs[speed].t2_8 + T) / T; + + tr.time_2r = (pio_specs[speed].t2_8 + T) / T; + tr.time_ax = (pio_specs[speed].tA + T) / T + 2; + tr.time_pio_rdx = 1; + tr.time_4 = (pio_specs[speed].t4 + T) / T; + + tr.time_9 = (pio_specs[speed].t9 + T) / T; + } + + update_timing_config(&tr, host); + + return 0; +} + +static void pata_fsl_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + set_ata_bus_timing(adev->pio_mode, to_platform_device(ap->dev)); +} + +#ifdef CONFIG_FSL_PATA_USE_DMA +static void pata_fsl_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pata_fsl_priv *priv = ap->host->private_data; + + priv->ultra = adev->dma_mode >= XFER_UDMA_0; + + set_ata_bus_timing(adev->dma_mode, to_platform_device(ap->dev)); +} +#endif + +static int pata_fsl_port_start(struct ata_port *ap) +{ + return 0; +} + +#ifdef CONFIG_FSL_PATA_USE_DMA +static void dma_callback(void *arg, int error_status, unsigned int count) +{ + struct ata_port *ap = arg; + struct pata_fsl_priv *priv = ap->host->private_data; + u8 *ata_regs = priv->fsl_ata_regs; + + priv->dma_done = 1; + /* + * DMA is finished, so unmask INTRQ from the drive to allow the + * normal ISR to fire. + */ +#if 0 + __raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN); +#else + WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN); +#endif + mb(); +} + +static void pata_fsl_bmdma_setup(struct ata_queued_cmd *qc) +{ + int nr_sg = 0; + int chan; + int dma_mode = 0, dma_ultra; + u8 ata_control; + struct ata_port *ap = qc->ap; + struct pata_fsl_priv *priv = ap->host->private_data; + u8 *ata_regs = priv->fsl_ata_regs; + struct fsl_ata_platform_data *plat = ap->dev->platform_data; + struct scatterlist tmp[plat->max_sg], *tsg, *sg; + int err; + + DPRINTK("ENTER\n"); + + priv->dma_dir = qc->dma_dir; + + /* + * Configure the on-chip ATA interface hardware. + */ + dma_ultra = priv->ultra ? + FSL_ATA_CTRL_DMA_ULTRA : 0; + + ata_control = FSL_ATA_CTRL_FIFO_RST_B | + FSL_ATA_CTRL_ATA_RST_B | + FSL_ATA_CTRL_DMA_PENDING | + dma_ultra; + + if (qc->dma_dir == DMA_TO_DEVICE) { + chan = priv->dma_wchan; + ata_control |= FSL_ATA_CTRL_FIFO_TX_EN | + FSL_ATA_CTRL_DMA_WRITE; + dma_mode = DMA_MODE_WRITE; + } else { + chan = priv->dma_rchan; + ata_control |= FSL_ATA_CTRL_FIFO_RCV_EN; + dma_mode = DMA_MODE_READ; + } +#if 0 + __raw_writel(ata_control, ata_regs + FSL_ATA_CONTROL); + __raw_writel(plat->fifo_alarm, ata_regs + FSL_ATA_FIFO_ALARM); + __raw_writel(FSL_ATA_INTR_ATA_INTRQ1, ata_regs + FSL_ATA_INT_EN); +#else + WRITE_ATA8(ata_control, FSL_ATA_CONTROL); + WRITE_ATA8(plat->fifo_alarm, FSL_ATA_FIFO_ALARM); + WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ1, FSL_ATA_INT_EN); +#endif + mb(); + + /* + * Set up the DMA completion callback. + */ + mxc_dma_callback_set(chan, dma_callback, (void *)ap); + + /* + * Copy the sg list to an array. + */ + tsg = tmp; + ata_for_each_sg(sg, qc) { + memcpy(tsg, sg, sizeof *sg); + tsg++; + nr_sg++; + } + + err = mxc_dma_sg_config(chan, tmp, nr_sg, 0, dma_mode); + if (err) { + printk(KERN_ERR "pata_fsl_bmdma_setup: error %d\n", err); + } + DPRINTK("EXIT\n"); +} + +static void pata_fsl_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pata_fsl_priv *priv = ap->host->private_data; + int chan; + int err; + + /* + * Start the channel. + */ + chan = qc->dma_dir == DMA_TO_DEVICE ? priv->dma_wchan : priv->dma_rchan; + + priv->dma_done = 0; + + err = mxc_dma_enable(chan); + if (err) { + printk(KERN_ERR "%s: : error %d\n", __func__, err); + } + + ap->ops->exec_command(ap, &qc->tf); +} + +static void pata_fsl_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* do a dummy read as in ata_bmdma_stop */ + ata_altstatus(ap); +} + +static u8 pata_fsl_bmdma_status(struct ata_port *ap) +{ + struct pata_fsl_priv *priv = ap->host->private_data; + + return priv->dma_done ? ATA_DMA_INTR : 0; +} + +static void pata_fsl_dma_init(struct ata_port *ap) +{ + struct pata_fsl_priv *priv = ap->host->private_data; + + priv->dma_rchan = -1; + priv->dma_wchan = -1; + + priv->dma_rchan = mxc_dma_request(MXC_DMA_ATA_RX, "MXC ATA RX"); + if (priv->dma_rchan < 0) { + dev_printk(KERN_ERR, ap->dev, "couldn't get RX DMA channel\n"); + goto err_out; + } + + priv->dma_wchan = mxc_dma_request(MXC_DMA_ATA_TX, "MXC ATA TX"); + if (priv->dma_wchan < 0) { + dev_printk(KERN_ERR, ap->dev, "couldn't get TX DMA channel\n"); + goto err_out; + } + + dev_printk(KERN_ERR, ap->dev, "rchan=%d wchan=%d\n", priv->dma_rchan, + priv->dma_wchan); + return; + +err_out: + ap->mwdma_mask = 0; + ap->udma_mask = 0; + mxc_dma_free(priv->dma_rchan); + mxc_dma_free(priv->dma_wchan); + kfree(priv); +} +#endif /* CONFIG_FSL_PATA_USE_DMA */ + +static u8 pata_fsl_irq_ack(struct ata_port *ap, unsigned int chk_drq) +{ + unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; + u8 status; + + status = ata_busy_wait(ap, bits, 1000); + if (status & bits) + if (ata_msg_err(ap)) + printk(KERN_ERR "abnormal status 0x%X\n", status); + + return status; +} + +static void ata_dummy_noret(struct ata_port *ap) { return; } + +static struct scsi_host_template pata_fsl_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, +#ifdef CONFIG_FSL_PATA_USE_DMA + .dma_boundary = FSL_ATA_MAX_SG_LEN, +#endif + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations pata_fsl_port_ops = { + .set_piomode = pata_fsl_set_piomode, +#ifdef CONFIG_FSL_PATA_USE_DMA + .set_dmamode = pata_fsl_set_dmamode, +#endif + + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_unknown, + +#ifdef CONFIG_FSL_PATA_USE_DMA + .bmdma_setup = pata_fsl_bmdma_setup, + .bmdma_start = pata_fsl_bmdma_start, +#endif + + .qc_prep = ata_noop_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = ata_data_xfer_noirq, + + .irq_clear = ata_dummy_noret, + .irq_on = ata_irq_on, + .irq_ack = pata_fsl_irq_ack, + + .port_start = pata_fsl_port_start, + +#ifdef CONFIG_FSL_PATA_USE_DMA + .bmdma_stop = pata_fsl_bmdma_stop, + .bmdma_status = pata_fsl_bmdma_status, +#endif +}; + +static void fsl_setup_port(struct ata_ioports *ioaddr) +{ + unsigned int shift = 2; + + ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << shift); + ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << shift); + ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift); + ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << shift); + ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << shift); + ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << shift); + ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << shift); + ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << shift); + ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << shift); + ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << shift); +} + +/** + * pata_fsl_probe - attach a platform interface + * @pdev: platform device + * + * Register a platform bus integrated ATA host controller + * + * The 3 platform device resources are used as follows: + * + * - I/O Base (IORESOURCE_MEM) virt. addr. of ATA controller regs + * - CTL Base (IORESOURCE_MEM) unused + * - IRQ (IORESOURCE_IRQ) platform IRQ assigned to ATA + * + */ +static int __devinit pata_fsl_probe(struct platform_device *pdev) +{ + struct resource *io_res; + struct ata_host *host; + struct ata_port *ap; + struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) + pdev->dev.platform_data; + struct pata_fsl_priv *priv; + u8 *ata_regs; + int ret; + + DPRINTK("ENTER\n"); + /* + * Get an ata_host structure for this device + */ + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + return -ENOMEM; + ap = host->ports[0]; + + /* + * Allocate private data + */ + priv = kzalloc(sizeof (struct pata_fsl_priv), GFP_KERNEL); + if(priv == NULL) { + /* free(host); */ + return -ENOMEM; + } + host->private_data = priv; + + /* + * Set up resources + */ + if (unlikely(pdev->num_resources != 3)) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ata_regs = (u8 *)io_res->start; + priv->fsl_ata_regs = ata_regs; + ap->ioaddr.cmd_addr = (void *)(ata_regs + FSL_ATA_DRIVE_DATA); + ap->ioaddr.ctl_addr = (void *)(ata_regs + FSL_ATA_DRIVE_CONTROL); + ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; + ap->ops = &pata_fsl_port_ops; + ap->pio_mask = 0x7F; +#ifdef CONFIG_FSL_PATA_USE_DMA + ap->mwdma_mask = 0x7F; + ap->udma_mask = plat->udma_mask; + pata_fsl_sht.sg_tablesize = plat->max_sg; +#else + ap->mwdma_mask = 0x00; + ap->udma_mask = 0x00; +#endif + fsl_setup_port(&ap->ioaddr); + + /* + * Do platform-specific initialization (e.g. allocate pins, + * turn on clock). After this call it is assumed that + * plat->get_clk_rate() can be called to calculate + * timing. + */ + if (plat->init && plat->init(pdev)) { + /* REVISIT: don't leak what ata_host_alloc() allocated */ + return -ENODEV; + } + + /* Deassert the reset bit to enable the interface */ + WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL); + mb(); + + /* Set initial timing and mode */ + set_ata_bus_timing(XFER_PIO_4, pdev); + +#ifdef CONFIG_FSL_PATA_USE_DMA + /* get DMA ready */ + pata_fsl_dma_init(ap); +#endif + + /* + * Enable the ATA INTRQ interrupt from the bus, but + * only allow the CPU to see it (INTRQ2) at this point. + * INTRQ1, which goes to the DMA, will be enabled later. + */ +#if 0 + __raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN); +#else + WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN); +#endif + mb(); + + /* activate */ + ret = ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt, + 0, &pata_fsl_sht); + DPRINTK("EXIT ret=%d\n", ret); + return ret; +} + +/** + * pata_fsl_remove - unplug a platform interface + * @pdev: platform device + * + * A platform bus ATA device has been unplugged. Perform the needed + * cleanup. Also called on module unload for any active devices. + */ +static int __devexit pata_fsl_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ata_host *host = dev_get_drvdata(dev); + struct pata_fsl_priv *priv = host->private_data; + struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) + pdev->dev.platform_data; + u8 *ata_regs = priv->fsl_ata_regs; + +#if 0 + __raw_writel(0, ata_regs + FSL_ATA_INT_EN); /* Disable interrupts */ +#else + WRITE_ATA8(0, FSL_ATA_INT_EN); /* Disable interrupts */ +#endif + mb(); + + ata_host_detach(host); + + if (plat->exit) + plat->exit(); + + kfree(priv); + + return 0; +} + +#ifdef CONFIG_PM +static int pata_fsl_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct pata_fsl_priv *priv = host->private_data; + struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) + pdev->dev.platform_data; + u8 *ata_regs = priv->fsl_ata_regs; + + /* Disable interrupts. */ +#if 0 + __raw_writel(0, ata_regs + FSL_ATA_INT_EN); +#else + WRITE_ATA8(0, FSL_ATA_INT_EN); +#endif + mb(); + + if (plat->exit) + plat->exit(); + + return 0; +} + +static int pata_fsl_resume(struct platform_device *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct pata_fsl_priv *priv = host->private_data; + struct fsl_ata_platform_data *plat = (struct fsl_ata_platform_data *) + pdev->dev.platform_data; + u8 *ata_regs = priv->fsl_ata_regs; + + if (plat->init && plat->init(pdev)) { + return -ENODEV; + } + + /* Deassert the reset bit to enable the interface */ +#if 0 + __raw_writel(FSL_ATA_CTRL_ATA_RST_B, ata_regs + FSL_ATA_CONTROL); +#else + WRITE_ATA8(FSL_ATA_CTRL_ATA_RST_B, FSL_ATA_CONTROL); +#endif + mb(); + + /* Set initial timing and mode */ + set_ata_bus_timing(XFER_PIO_4, pdev); + + /* + * Enable hardware interrupts. + */ +#if 0 + __raw_writel(FSL_ATA_INTR_ATA_INTRQ2, ata_regs + FSL_ATA_INT_EN); +#else + WRITE_ATA8(FSL_ATA_INTR_ATA_INTRQ2, FSL_ATA_INT_EN); +#endif + mb(); + + return 0; +} +#endif + +static struct platform_driver pata_fsl_driver = { + .probe = pata_fsl_probe, + .remove = __devexit_p(pata_fsl_remove), +#ifdef CONFIG_PM + .suspend = pata_fsl_suspend, + .resume = pata_fsl_resume, +#endif + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init pata_fsl_init(void) +{ + int ret; + + DPRINTK("ENTER\n"); + ret = platform_driver_register(&pata_fsl_driver); + DPRINTK("EXIT ret=%d\n", ret); + return ret; +} + +static void __exit pata_fsl_exit(void) +{ + platform_driver_unregister(&pata_fsl_driver); +} +module_init(pata_fsl_init); +module_exit(pata_fsl_exit); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("low-level driver for Freescale ATA"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); --- a/include/asm-m68k/pci.h +++ b/include/asm-m68k/pci.h @@ -7,8 +7,14 @@ #ifndef _ASM_M68K_PCI_H #define _ASM_M68K_PCI_H -#ifdef CONFIG_PCI - +#ifndef CONFIG_PCI +/* + * The PCI address space does equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) +#else #include /* --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -126,5 +126,16 @@ struct mpc8xx_pcmcia_ops { int(*voltage_set)(int slot, int vcc, int vpp); }; +struct fsl_ata_platform_data { +#ifdef CONFIG_FSL_PATA_USE_DMA + int udma_mask; /* UDMA modes h/w can handle */ + int fifo_alarm; /* value for fifo_alarm reg */ + int max_sg; /* longest sglist h/w can handle */ +#endif + int (*init)(struct platform_device *pdev); + void (*exit)(void); + int (*get_clk_rate)(void); +}; + #endif /* _FSL_DEVICE_H_ */ #endif /* __KERNEL__ */