/* ========================================================================== * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $ * $Revision: #75 $ * $Date: 2008/07/15 $ * $Change: 1064940 $ * * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless * otherwise expressly agreed to in writing between Synopsys and you. * * The Software IS NOT an item of Licensed Software or Licensed Product under * any End User Software License Agreement or Agreement for Licensed Product * with Synopsys or any supplement thereto. You are permitted to use and * redistribute this Software in source and binary forms, with or without * modification, provided that redistributions of source code must retain this * notice. You may not view, use, disclose, copy or distribute this file or * any information contained herein except pursuant to this license grant from * Synopsys. If you do not agree with this notice, including the disclaimer * below, then you are not authorized to use the Software. * * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * DAMAGE. * ========================================================================== */ #ifndef DWC_DEVICE_ONLY /** * @file * * This file contains the implementation of the HCD. In Linux, the HCD * implements the hc_driver API. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "otg_driver.h" #include "otg_hcd.h" #include "otg_regs.h" static const char dwc_otg_hcd_name[] = "dwc_otg_hcd"; static const struct hc_driver dwc_otg_hc_driver = { .description = dwc_otg_hcd_name, .product_desc = "DWC OTG Controller", .hcd_priv_size = sizeof(dwc_otg_hcd_t), .irq = dwc_otg_hcd_irq, .flags = HCD_MEMORY | HCD_USB2, .start = dwc_otg_hcd_start, .stop = dwc_otg_hcd_stop, .urb_enqueue = dwc_otg_hcd_urb_enqueue, .urb_dequeue = dwc_otg_hcd_urb_dequeue, .endpoint_disable = dwc_otg_hcd_endpoint_disable, .get_frame_number = dwc_otg_hcd_get_frame_number, .hub_status_data = dwc_otg_hcd_hub_status_data, .hub_control = dwc_otg_hcd_hub_control, }; /** * Work queue function for starting the HCD when A-Cable is connected. * The dwc_otg_hcd_start() must be called in a process context. */ static void hcd_start_func(struct work_struct *_work) { struct delayed_work *dw = container_of(_work, struct delayed_work, work); struct dwc_otg_hcd *otg_hcd = container_of(dw, struct dwc_otg_hcd, start_work); struct usb_hcd *usb_hcd = container_of((void *)otg_hcd, struct usb_hcd, hcd_priv); DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd); if (usb_hcd) { dwc_otg_hcd_start(usb_hcd); } } /** * HCD Callback function for starting the HCD when A-Cable is * connected. * * @param p void pointer to the struct usb_hcd */ static int32_t dwc_otg_hcd_start_cb(void *p) { dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p); dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; hprt0_data_t hprt0; if (core_if->op_state == B_HOST) { /* * Reset the port. During a HNP mode switch the reset * needs to occur within 1ms and have a duration of at * least 50ms. */ hprt0.d32 = dwc_otg_read_hprt0(core_if); hprt0.b.prtrst = 1; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ((struct usb_hcd *)p)->self.is_b_host = 1; } else { ((struct usb_hcd *)p)->self.is_b_host = 0; } /* Need to start the HCD in a non-interrupt context. */ // INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func); INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func); // schedule_work(&dwc_otg_hcd->start_work); queue_delayed_work(core_if->wq_otg, &dwc_otg_hcd->start_work, 50 * HZ / 1000); return 1; } /** * HCD Callback function for stopping the HCD. * * @param p void pointer to the struct usb_hcd */ static int32_t dwc_otg_hcd_stop_cb(void *p) { struct usb_hcd *usb_hcd = (struct usb_hcd *)p; DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); dwc_otg_hcd_stop(usb_hcd); return 1; } static void del_xfer_timers(dwc_otg_hcd_t *hcd) { #ifdef DEBUG int i; int num_channels = hcd->core_if->core_params->host_channels; for (i = 0; i < num_channels; i++) { del_timer(&hcd->core_if->hc_xfer_timer[i]); } #endif } static void del_timers(dwc_otg_hcd_t *hcd) { del_xfer_timers(hcd); del_timer(&hcd->conn_timer); } /** * Processes all the URBs in a single list of QHs. Completes them with * -ETIMEDOUT and frees the QTD. */ static void kill_urbs_in_qh_list(dwc_otg_hcd_t *hcd, struct list_head *qh_list) { struct list_head *qh_item; dwc_otg_qh_t *qh; struct list_head *qtd_item; dwc_otg_qtd_t *qtd; unsigned long flags; SPIN_LOCK_IRQSAVE(&hcd->lock, flags); list_for_each(qh_item, qh_list) { qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry); for (qtd_item = qh->qtd_list.next; qtd_item != &qh->qtd_list; qtd_item = qh->qtd_list.next) { qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry); if (qtd->urb != NULL) { dwc_otg_hcd_complete_urb(hcd, qtd->urb, -ETIMEDOUT); } dwc_otg_hcd_qtd_remove_and_free(hcd, qtd); } } SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags); } /** * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic * and periodic schedules. The QTD associated with each URB is removed from * the schedule and freed. This function may be called when a disconnect is * detected or when the HCD is being stopped. */ static void kill_all_urbs(dwc_otg_hcd_t *hcd) { kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive); kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active); kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive); kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready); kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned); kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued); } /** * HCD Callback function for disconnect of the HCD. * * @param p void pointer to the struct usb_hcd */ static int32_t dwc_otg_hcd_disconnect_cb(void *p) { gintsts_data_t intr; dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p); //DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); /* * Set status flags for the hub driver. */ dwc_otg_hcd->flags.b.port_connect_status_change = 1; dwc_otg_hcd->flags.b.port_connect_status = 0; /* * Shutdown any transfers in process by clearing the Tx FIFO Empty * interrupt mask and status bits and disabling subsequent host * channel interrupts. */ intr.d32 = 0; intr.b.nptxfempty = 1; intr.b.ptxfempty = 1; intr.b.hcintr = 1; dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0); dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0); del_timers(dwc_otg_hcd); /* * Turn off the vbus power only if the core has transitioned to device * mode. If still in host mode, need to keep power on to detect a * reconnection. */ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) { hprt0_data_t hprt0 = { .d32=0 }; DWC_PRINT("Disconnect: PortPower off\n"); hprt0.b.prtpwr = 0; dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32); } dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); } /* Respond with an error status to all URBs in the schedule. */ kill_all_urbs(dwc_otg_hcd); if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { /* Clean up any host channels that were in use. */ int num_channels; int i; dwc_hc_t *channel; dwc_otg_hc_regs_t *hc_regs; hcchar_data_t hcchar; num_channels = dwc_otg_hcd->core_if->core_params->host_channels; if (!dwc_otg_hcd->core_if->dma_enable) { /* Flush out any channel requests in slave mode. */ for (i = 0; i < num_channels; i++) { channel = dwc_otg_hcd->hc_ptr_array[i]; if (list_empty(&channel->hc_list_entry)) { hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i]; hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); if (hcchar.b.chen) { hcchar.b.chen = 0; hcchar.b.chdis = 1; hcchar.b.epdir = 0; dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); } } } } for (i = 0; i < num_channels; i++) { channel = dwc_otg_hcd->hc_ptr_array[i]; if (list_empty(&channel->hc_list_entry)) { hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i]; hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); if (hcchar.b.chen) { /* Halt the channel. */ hcchar.b.chdis = 1; dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); } dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel); list_add_tail(&channel->hc_list_entry, &dwc_otg_hcd->free_hc_list); } } } /* A disconnect will end the session so the B-Device is no * longer a B-host. */ ((struct usb_hcd *)p)->self.is_b_host = 0; return 1; } /** * Connection timeout function. An OTG host is required to display a * message if the device does not connect within 10 seconds. */ void dwc_otg_hcd_connect_timeout(unsigned long ptr) { DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)ptr); DWC_PRINT("Connect Timeout\n"); DWC_ERROR("Device Not Connected/Responding\n"); } /** * Start the connection timer. An OTG host is required to display a * message if the device does not connect within 10 seconds. The * timer is deleted if a port connect interrupt occurs before the * timer expires. */ static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t *hcd) { init_timer(&hcd->conn_timer); hcd->conn_timer.function = dwc_otg_hcd_connect_timeout; hcd->conn_timer.data = 0; hcd->conn_timer.expires = jiffies + (HZ * 10); add_timer(&hcd->conn_timer); } /** * HCD Callback function for disconnect of the HCD. * * @param p void pointer to the struct usb_hcd */ static int32_t dwc_otg_hcd_session_start_cb(void *p) { dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p); DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); dwc_otg_hcd_start_connect_timer(dwc_otg_hcd); return 1; } /** * HCD Callback structure for handling mode switching. */ static dwc_otg_cil_callbacks_t hcd_cil_callbacks = { .start = dwc_otg_hcd_start_cb, .stop = dwc_otg_hcd_stop_cb, .disconnect = dwc_otg_hcd_disconnect_cb, .session_start = dwc_otg_hcd_session_start_cb, .p = 0, }; /** * Reset tasklet function */ static void reset_tasklet_func(unsigned long data) { dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)data; dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; hprt0_data_t hprt0; DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); hprt0.d32 = dwc_otg_read_hprt0(core_if); hprt0.b.prtrst = 1; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); mdelay(60); hprt0.b.prtrst = 0; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); dwc_otg_hcd->flags.b.port_reset_change = 1; } static struct tasklet_struct reset_tasklet = { .next = NULL, .state = 0, .count = ATOMIC_INIT(0), .func = reset_tasklet_func, .data = 0, }; /** * Initializes the HCD. This function allocates memory for and initializes the * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the * USB bus with the core and calls the hc_driver->start() function. It returns * a negative error on failure. */ int dwc_otg_hcd_init(struct platform_device *pdev) { struct usb_hcd *hcd = NULL; dwc_otg_hcd_t *dwc_otg_hcd = NULL; dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev); int num_channels; int i; dwc_hc_t *channel; int retval = 0; DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n"); /* Set device flags indicating whether the HCD supports DMA. */ if (otg_dev->core_if->dma_enable) { DWC_PRINT("Using DMA mode\n"); if (otg_dev->core_if->dma_desc_enable) { DWC_PRINT("Device using Descriptor DMA mode\n"); } else { DWC_PRINT("Device using Buffer DMA mode\n"); } } /* * Allocate memory for the base HCD plus the DWC OTG HCD. * Initialize the base HCD. */ hcd = usb_create_hcd(&dwc_otg_hc_driver, &pdev->dev, "gadget"); if (!hcd) { retval = -ENOMEM; goto error1; } hcd->regs = otg_dev->base; hcd->self.otg_port = 1; /* Integrate TT in root hub, by default this is disbled. */ hcd->has_tt = 1; /* Initialize the DWC OTG HCD. */ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); dwc_otg_hcd->core_if = otg_dev->core_if; otg_dev->hcd = dwc_otg_hcd; init_hcd_usecs(dwc_otg_hcd); /* */ spin_lock_init(&dwc_otg_hcd->lock); /* Register the HCD CIL Callbacks */ dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if, &hcd_cil_callbacks, hcd); /* Initialize the non-periodic schedule. */ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive); INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active); /* Initialize the periodic schedule. */ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive); INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready); INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned); INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued); /* * Create a host channel descriptor for each host channel implemented * in the controller. Initialize the channel descriptor array. */ INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list); num_channels = dwc_otg_hcd->core_if->core_params->host_channels; memset(dwc_otg_hcd->hc_ptr_array, 0, sizeof(dwc_otg_hcd->hc_ptr_array)); for (i = 0; i < num_channels; i++) { channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL); if (channel == NULL) { retval = -ENOMEM; DWC_ERROR("%s: host channel allocation failed\n", __func__); goto error2; } memset(channel, 0, sizeof(dwc_hc_t)); channel->hc_num = i; dwc_otg_hcd->hc_ptr_array[i] = channel; #ifdef DEBUG init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]); #endif DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel); } /* Initialize the Connection timeout timer. */ init_timer(&dwc_otg_hcd->conn_timer); /* Initialize reset tasklet. */ reset_tasklet.data = (unsigned long) dwc_otg_hcd; dwc_otg_hcd->reset_tasklet = &reset_tasklet; /* * Finish generic HCD initialization and start the HCD. This function * allocates the DMA buffer pool, registers the USB bus, requests the * IRQ line, and calls dwc_otg_hcd_start method. */ retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED); if (retval < 0) { goto error2; } /* * Allocate space for storing data on status transactions. Normally no * data is sent, but this space acts as a bit bucket. This must be * done after usb_add_hcd since that function allocates the DMA buffer * pool. */ if (otg_dev->core_if->dma_enable) { dwc_otg_hcd->status_buf = dma_alloc_coherent(&pdev->dev, DWC_OTG_HCD_STATUS_BUF_SIZE, &dwc_otg_hcd->status_buf_dma, GFP_KERNEL | GFP_DMA); } else { dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE, GFP_KERNEL); } if (!dwc_otg_hcd->status_buf) { retval = -ENOMEM; DWC_ERROR("%s: status_buf allocation failed\n", __func__); goto error3; } dwc_otg_hcd->otg_dev = otg_dev; DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, usbbus=%d\n", hcd->self.busnum); return 0; /* Error conditions */ error3: usb_remove_hcd(hcd); error2: dwc_otg_hcd_free(hcd); usb_put_hcd(hcd); error1: return retval; } /** * Removes the HCD. * Frees memory and resources associated with the HCD and deregisters the bus. */ void dwc_otg_hcd_remove(struct platform_device *pdev) { dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev); dwc_otg_hcd_t *dwc_otg_hcd; struct usb_hcd *hcd; DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n"); if (!otg_dev) { DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); return; } dwc_otg_hcd = otg_dev->hcd; if (!dwc_otg_hcd) { DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); return; } hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd); if (!hcd) { DWC_DEBUGPL(DBG_ANY, "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", __func__); return; } /* Turn off all interrupts */ dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0); dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0); usb_remove_hcd(hcd); dwc_otg_hcd_free(hcd); usb_put_hcd(hcd); } /* ========================================================================= * Linux HC Driver Functions * ========================================================================= */ /** * Initializes dynamic portions of the DWC_otg HCD state. */ static void hcd_reinit(dwc_otg_hcd_t *hcd) { struct list_head *item; int num_channels; int i; dwc_hc_t *channel; hcd->flags.d32 = 0; hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active; hcd->non_periodic_channels = 0; hcd->periodic_channels = 0; /* * Put all channels in the free channel list and clean up channel * states. */ item = hcd->free_hc_list.next; while (item != &hcd->free_hc_list) { list_del(item); item = hcd->free_hc_list.next; } num_channels = hcd->core_if->core_params->host_channels; for (i = 0; i < num_channels; i++) { channel = hcd->hc_ptr_array[i]; list_add_tail(&channel->hc_list_entry, &hcd->free_hc_list); dwc_otg_hc_cleanup(hcd->core_if, channel); } /* Initialize the DWC core for host mode operation. */ dwc_otg_core_host_init(hcd->core_if); } /** Initializes the DWC_otg controller and its root hub and prepares it for host * mode operation. Activates the root port. Returns 0 on success and a negative * error code on failure. */ int dwc_otg_hcd_start(struct usb_hcd *hcd) { dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; struct usb_bus *bus; DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); bus = hcd_to_bus(hcd); /* Initialize the bus state. If the core is in Device Mode * HALT the USB bus and return. */ if (dwc_otg_is_device_mode(core_if)) { hcd->state = HC_STATE_RUNNING; return 0; } hcd->state = HC_STATE_RUNNING; /* Initialize and connect root hub if one is not already attached */ if (bus->root_hub) { DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n"); /* Inform the HUB driver to resume. */ usb_hcd_resume_root_hub(hcd); } else { DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Does Not Have Root Hub\n"); } hcd_reinit(dwc_otg_hcd); return 0; } static void qh_list_free(dwc_otg_hcd_t *hcd, struct list_head *qh_list) { struct list_head *item; dwc_otg_qh_t *qh; unsigned long flags; if (!qh_list->next) { /* The list hasn't been initialized yet. */ return; } /* Ensure there are no QTDs or URBs left. */ kill_urbs_in_qh_list(hcd, qh_list); SPIN_LOCK_IRQSAVE(&hcd->lock, flags); for (item = qh_list->next; item != qh_list; item = qh_list->next) { qh = list_entry(item, dwc_otg_qh_t, qh_list_entry); dwc_otg_hcd_qh_remove_and_free(hcd, qh); } SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags); } /** * Halts the DWC_otg host mode operations in a clean manner. USB transfers are * stopped. */ void dwc_otg_hcd_stop(struct usb_hcd *hcd) { dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); hprt0_data_t hprt0 = { .d32=0 }; DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); /* Turn off all host-specific interrupts. */ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); /* * The root hub should be disconnected before this function is called. * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) * and the QH lists (via ..._hcd_endpoint_disable). */ /* Turn off the vbus power */ DWC_PRINT("PortPower off\n"); hprt0.b.prtpwr = 0; dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32); } /** Returns the current frame number. */ int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd) { dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); hfnum_data_t hfnum; hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if-> host_if->host_global_regs->hfnum); #ifdef DEBUG_SOF DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum); #endif return hfnum.b.frnum; } /** * Frees secondary storage associated with the dwc_otg_hcd structure contained * in the struct usb_hcd field. */ void dwc_otg_hcd_free(struct usb_hcd *hcd) { dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); int i; DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); del_timers(dwc_otg_hcd); /* Free memory for QH/QTD lists */ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive); qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active); qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive); qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready); qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned); qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued); /* Free memory for the host channels. */ for (i = 0; i < MAX_EPS_CHANNELS; i++) { dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i]; if (hc != NULL) { DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc); kfree(hc); } } if (dwc_otg_hcd->core_if->dma_enable) { if (dwc_otg_hcd->status_buf_dma) { dma_free_coherent(hcd->self.controller, DWC_OTG_HCD_STATUS_BUF_SIZE, dwc_otg_hcd->status_buf, dwc_otg_hcd->status_buf_dma); } } else if (dwc_otg_hcd->status_buf != NULL) { kfree(dwc_otg_hcd->status_buf); } } #ifdef DEBUG static void dump_urb_info(struct urb *urb, char* fn_name) { DWC_PRINT("%s, urb %p\n", fn_name, urb); DWC_PRINT(" Device address: %d\n", usb_pipedevice(urb->pipe)); DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), (usb_pipein(urb->pipe) ? "IN" : "OUT")); DWC_PRINT(" Endpoint type: %s\n", ({char *pipetype; switch (usb_pipetype(urb->pipe)) { case PIPE_CONTROL: pipetype = "CONTROL"; break; case PIPE_BULK: pipetype = "BULK"; break; case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break; case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break; default: pipetype = "UNKNOWN"; break; }; pipetype;})); DWC_PRINT(" Speed: %s\n", ({char *speed; switch (urb->dev->speed) { case USB_SPEED_HIGH: speed = "HIGH"; break; case USB_SPEED_FULL: speed = "FULL"; break; case USB_SPEED_LOW: speed = "LOW"; break; default: speed = "UNKNOWN"; break; }; speed;})); DWC_PRINT(" Max packet size: %d\n", usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); DWC_PRINT(" Data buffer length: %d\n", urb->transfer_buffer_length); DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n", urb->transfer_buffer, (void *)urb->transfer_dma); DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n", urb->setup_packet, (void *)urb->setup_dma); DWC_PRINT(" Interval: %d\n", urb->interval); if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { int i; for (i = 0; i < urb->number_of_packets; i++) { DWC_PRINT(" ISO Desc %d:\n", i); DWC_PRINT(" offset: %d, length %d\n", urb->iso_frame_desc[i].offset, urb->iso_frame_desc[i].length); } } } static void dump_channel_info(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) { if (qh->channel != NULL) { dwc_hc_t *hc = qh->channel; struct list_head *item; dwc_otg_qh_t *qh_item; int num_channels = hcd->core_if->core_params->host_channels; int i; dwc_otg_hc_regs_t *hc_regs; hcchar_data_t hcchar; hcsplt_data_t hcsplt; hctsiz_data_t hctsiz; uint32_t hcdma; hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); hcdma = dwc_read_reg32(&hc_regs->hcdma); DWC_PRINT(" Assigned to channel %p:\n", hc); DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", hc->dev_addr, hc->ep_num, hc->ep_is_in); DWC_PRINT(" ep_type: %d\n", hc->ep_type); DWC_PRINT(" max_packet: %d\n", hc->max_packet); DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start); DWC_PRINT(" xfer_started: %d\n", hc->xfer_started); DWC_PRINT(" halt_status: %d\n", hc->halt_status); DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff); DWC_PRINT(" xfer_len: %d\n", hc->xfer_len); DWC_PRINT(" qh: %p\n", hc->qh); DWC_PRINT(" NP inactive sched:\n"); list_for_each(item, &hcd->non_periodic_sched_inactive) { qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); DWC_PRINT(" %p\n", qh_item); } DWC_PRINT(" NP active sched:\n"); list_for_each(item, &hcd->non_periodic_sched_active) { qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); DWC_PRINT(" %p\n", qh_item); } DWC_PRINT(" Channels: \n"); for (i = 0; i < num_channels; i++) { dwc_hc_t *hc = hcd->hc_ptr_array[i]; DWC_PRINT(" %2d: %p\n", i, hc); } } } #endif //OTG host require the DMA addr is DWORD-aligned, //patch it if the buffer is not DWORD-aligned inline void hcd_check_and_patch_dma_addr(struct urb *urb){ if((!urb->transfer_buffer)||!urb->transfer_dma||urb->transfer_dma==0xffffffff) return; if(((u32)urb->transfer_buffer)& 0x3){ /* printk("%s: " "urb(%.8x) " "transfer_buffer=%.8x, " "transfer_dma=%.8x, " "transfer_buffer_length=%d, " "actual_length=%d(%x), " "\n", ((urb->transfer_flags & URB_DIR_MASK)==URB_DIR_OUT)?"OUT":"IN", urb, urb->transfer_buffer, urb->transfer_dma, urb->transfer_buffer_length, urb->actual_length,urb->actual_length ); */ if(!urb->aligned_transfer_buffer||urb->aligned_transfer_buffer_lengthtransfer_buffer_length){ urb->aligned_transfer_buffer_length=urb->transfer_buffer_length; if(urb->aligned_transfer_buffer) { kfree(urb->aligned_transfer_buffer); } urb->aligned_transfer_buffer=kmalloc(urb->aligned_transfer_buffer_length,GFP_KERNEL|GFP_DMA|GFP_ATOMIC); urb->aligned_transfer_dma=dma_map_single(NULL,(void *)(urb->aligned_transfer_buffer),(urb->aligned_transfer_buffer_length),DMA_FROM_DEVICE); if(!urb->aligned_transfer_buffer){ DWC_ERROR("Cannot alloc required buffer!!\n"); BUG(); } //printk(" new allocated aligned_buf=%.8x aligned_buf_len=%d\n", (u32)urb->aligned_transfer_buffer, urb->aligned_transfer_buffer_length); } urb->transfer_dma=urb->aligned_transfer_dma; if((urb->transfer_flags & URB_DIR_MASK)==URB_DIR_OUT) { memcpy(urb->aligned_transfer_buffer,urb->transfer_buffer,urb->transfer_buffer_length); dma_sync_single_for_device(NULL,urb->transfer_dma,urb->transfer_buffer_length,DMA_TO_DEVICE); } } } /** Starts processing a USB transfer request specified by a USB Request Block * (URB). mem_flags indicates the type of memory allocation to use while * processing this URB. */ int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd, // struct usb_host_endpoint *ep, struct urb *urb, gfp_t mem_flags ) { int retval = 0; dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); dwc_otg_qtd_t *qtd; #ifdef DEBUG if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { dump_urb_info(urb, "dwc_otg_hcd_urb_enqueue"); } #endif if (!dwc_otg_hcd->flags.b.port_connect_status) { /* No longer connected. */ return -ENODEV; } hcd_check_and_patch_dma_addr(urb); qtd = dwc_otg_hcd_qtd_create(urb); if (qtd == NULL) { DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); return -ENOMEM; } retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd); if (retval < 0) { DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " "Error status %d\n", retval); dwc_otg_hcd_qtd_free(qtd); } return retval; } /** Aborts/cancels a USB transfer request. Always returns 0 to indicate * success. */ int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { unsigned long flags; dwc_otg_hcd_t *dwc_otg_hcd; dwc_otg_qtd_t *urb_qtd; dwc_otg_qh_t *qh; struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb); DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags); urb_qtd = (dwc_otg_qtd_t *)urb->hcpriv; qh = (dwc_otg_qh_t *)ep->hcpriv; if (urb_qtd == NULL) { SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); return 0; } #ifdef DEBUG if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { dump_urb_info(urb, "dwc_otg_hcd_urb_dequeue"); if (urb_qtd == qh->qtd_in_process) { dump_channel_info(dwc_otg_hcd, qh); } } #endif if (urb_qtd == qh->qtd_in_process) { /* The QTD is in process (it has been assigned to a channel). */ if (dwc_otg_hcd->flags.b.port_connect_status) { /* * If still connected (i.e. in host mode), halt the * channel so it can be used for other transfers. If * no longer connected, the host registers can't be * written to halt the channel since the core is in * device mode. */ dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel, DWC_OTG_HC_XFER_URB_DEQUEUE); } } /* * Free the QTD and clean up the associated QH. Leave the QH in the * schedule if it has any remaining QTDs. */ dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd, urb_qtd); if (urb_qtd == qh->qtd_in_process) { /* Note that dwc_otg_hcd_qh_deactivate() locks the spin_lock again */ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0); qh->channel = NULL; qh->qtd_in_process = NULL; } else { if (list_empty(&qh->qtd_list)) dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh); SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); } urb->hcpriv = NULL; /* Higher layer software sets URB status. */ usb_hcd_giveback_urb(hcd, urb, status); if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { DWC_PRINT("Called usb_hcd_giveback_urb()\n"); DWC_PRINT(" urb->status = %d\n", urb->status); } return 0; } /** Frees resources in the DWC_otg controller related to a given endpoint. Also * clears state in the HCD related to the endpoint. Any URBs for the endpoint * must already be dequeued. */ void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) { dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); dwc_otg_qh_t *qh; unsigned long flags; int retry = 0; DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, " "endpoint=%d\n", ep->desc.bEndpointAddress, dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress)); rescan: SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags); qh = (dwc_otg_qh_t *)(ep->hcpriv); if (!qh) goto done; /** Check that the QTD list is really empty */ if (!list_empty(&qh->qtd_list)) { if (retry++ < 250) { SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); schedule_timeout_uninterruptible(1); goto rescan; } DWC_WARN("DWC OTG HCD EP DISABLE:" " QTD List for this endpoint is not empty\n"); } dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh); ep->hcpriv = NULL; done: SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); } /** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid * interrupt. * * This function is called by the USB core when an interrupt occurs */ irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd) { int retVal = 0; dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); retVal = dwc_otg_hcd_handle_intr(dwc_otg_hcd); if (dwc_otg_hcd->flags.b.port_connect_status_change == 1) usb_hcd_poll_rh_status(hcd); return IRQ_RETVAL(retVal); } /** Creates Status Change bitmap for the root hub and root port. The bitmap is * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 * is the status change indicator for the single root port. Returns 1 if either * change indicator is 1, otherwise returns 0. */ int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, char *buf) { dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); buf[0] = 0; buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change || dwc_otg_hcd->flags.b.port_reset_change || dwc_otg_hcd->flags.b.port_enable_change || dwc_otg_hcd->flags.b.port_suspend_change || dwc_otg_hcd->flags.b.port_over_current_change) << 1; #ifdef DEBUG if (buf[0]) { DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" " Root port status changed\n"); DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", dwc_otg_hcd->flags.b.port_connect_status_change); DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", dwc_otg_hcd->flags.b.port_reset_change); DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", dwc_otg_hcd->flags.b.port_enable_change); DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", dwc_otg_hcd->flags.b.port_suspend_change); DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", dwc_otg_hcd->flags.b.port_over_current_change); } #endif return (buf[0] != 0); } #ifdef DWC_HS_ELECT_TST /* * Quick and dirty hack to implement the HS Electrical Test * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. * * This code was copied from our userspace app "hset". It sends a * Get Device Descriptor control sequence in two parts, first the * Setup packet by itself, followed some time later by the In and * Ack packets. Rather than trying to figure out how to add this * functionality to the normal driver code, we just hijack the * hardware, using these two function to drive the hardware * directly. */ dwc_otg_core_global_regs_t *global_regs; dwc_otg_host_global_regs_t *hc_global_regs; dwc_otg_hc_regs_t *hc_regs; uint32_t *data_fifo; static void do_setup(void) { gintsts_data_t gintsts; hctsiz_data_t hctsiz; hcchar_data_t hcchar; haint_data_t haint; hcint_data_t hcint; /* Enable HAINTs */ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); /* Enable HCINTs */ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); /* Read GINTSTS */ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); /* Read HAINT */ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); //fprintf(stderr, "HAINT: %08x\n", haint.d32); /* Read HCINT */ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); /* Read HCCHAR */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); /* Clear HCINT */ dwc_write_reg32(&hc_regs->hcint, hcint.d32); /* Clear HAINT */ dwc_write_reg32(&hc_global_regs->haint, haint.d32); /* Clear GINTSTS */ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); /* Read GINTSTS */ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); /* * Send Setup packet (Get Device Descriptor) */ /* Make sure channel is disabled */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); if (hcchar.b.chen) { //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32); hcchar.b.chdis = 1; // hcchar.b.chen = 1; dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); //sleep(1); mdelay(1000); /* Read GINTSTS */ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); /* Read HAINT */ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); //fprintf(stderr, "HAINT: %08x\n", haint.d32); /* Read HCINT */ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); /* Read HCCHAR */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); /* Clear HCINT */ dwc_write_reg32(&hc_regs->hcint, hcint.d32); /* Clear HAINT */ dwc_write_reg32(&hc_global_regs->haint, haint.d32); /* Clear GINTSTS */ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); //if (hcchar.b.chen) { // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32); //} } /* Set HCTSIZ */ hctsiz.d32 = 0; hctsiz.b.xfersize = 8; hctsiz.b.pktcnt = 1; hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); /* Set HCCHAR */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; hcchar.b.epdir = 0; hcchar.b.epnum = 0; hcchar.b.mps = 8; hcchar.b.chen = 1; dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); /* Fill FIFO with Setup data for Get Device Descriptor */ data_fifo = (uint32_t *)((char *)global_regs + 0x1000); dwc_write_reg32(data_fifo++, 0x01000680); dwc_write_reg32(data_fifo++, 0x00080000); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); /* Wait for host channel interrupt */ do { gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); } while (gintsts.b.hcintr == 0); //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); /* Disable HCINTs */ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); /* Disable HAINTs */ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); /* Read HAINT */ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); //fprintf(stderr, "HAINT: %08x\n", haint.d32); /* Read HCINT */ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); /* Read HCCHAR */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); /* Clear HCINT */ dwc_write_reg32(&hc_regs->hcint, hcint.d32); /* Clear HAINT */ dwc_write_reg32(&hc_global_regs->haint, haint.d32); /* Clear GINTSTS */ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); /* Read GINTSTS */ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); } static void do_in_ack(void) { gintsts_data_t gintsts; hctsiz_data_t hctsiz; hcchar_data_t hcchar; haint_data_t haint; hcint_data_t hcint; host_grxsts_data_t grxsts; /* Enable HAINTs */ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); /* Enable HCINTs */ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); /* Read GINTSTS */ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); /* Read HAINT */ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); //fprintf(stderr, "HAINT: %08x\n", haint.d32); /* Read HCINT */ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); /* Read HCCHAR */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); /* Clear HCINT */ dwc_write_reg32(&hc_regs->hcint, hcint.d32); /* Clear HAINT */ dwc_write_reg32(&hc_global_regs->haint, haint.d32); /* Clear GINTSTS */ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); /* Read GINTSTS */ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); /* * Receive Control In packet */ /* Make sure channel is disabled */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); if (hcchar.b.chen) { //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32); hcchar.b.chdis = 1; hcchar.b.chen = 1; dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); //sleep(1); mdelay(1000); /* Read GINTSTS */ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); /* Read HAINT */ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); //fprintf(stderr, "HAINT: %08x\n", haint.d32); /* Read HCINT */ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); /* Read HCCHAR */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); /* Clear HCINT */ dwc_write_reg32(&hc_regs->hcint, hcint.d32); /* Clear HAINT */ dwc_write_reg32(&hc_global_regs->haint, haint.d32); /* Clear GINTSTS */ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); //if (hcchar.b.chen) { // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32); //} } /* Set HCTSIZ */ hctsiz.d32 = 0; hctsiz.b.xfersize = 8; hctsiz.b.pktcnt = 1; hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); /* Set HCCHAR */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; hcchar.b.epdir = 1; hcchar.b.epnum = 0; hcchar.b.mps = 8; hcchar.b.chen = 1; dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); /* Wait for receive status queue interrupt */ do { gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); } while (gintsts.b.rxstsqlvl == 0); //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); /* Read RXSTS */ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); /* Clear RXSTSQLVL in GINTSTS */ gintsts.d32 = 0; gintsts.b.rxstsqlvl = 1; dwc_write_reg32(&global_regs->gintsts, gintsts.d32); switch (grxsts.b.pktsts) { case DWC_GRXSTS_PKTSTS_IN: /* Read the data into the host buffer */ if (grxsts.b.bcnt > 0) { int i; int word_count = (grxsts.b.bcnt + 3) / 4; data_fifo = (uint32_t *)((char *)global_regs + 0x1000); for (i = 0; i < word_count; i++) { (void)dwc_read_reg32(data_fifo++); } } //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt); break; default: //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n"); break; } gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); /* Wait for receive status queue interrupt */ do { gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); } while (gintsts.b.rxstsqlvl == 0); //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); /* Read RXSTS */ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); /* Clear RXSTSQLVL in GINTSTS */ gintsts.d32 = 0; gintsts.b.rxstsqlvl = 1; dwc_write_reg32(&global_regs->gintsts, gintsts.d32); switch (grxsts.b.pktsts) { case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: break; default: //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n"); break; } gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); /* Wait for host channel interrupt */ do { gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); } while (gintsts.b.hcintr == 0); //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); /* Read HAINT */ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); //fprintf(stderr, "HAINT: %08x\n", haint.d32); /* Read HCINT */ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); /* Read HCCHAR */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); /* Clear HCINT */ dwc_write_reg32(&hc_regs->hcint, hcint.d32); /* Clear HAINT */ dwc_write_reg32(&hc_global_regs->haint, haint.d32); /* Clear GINTSTS */ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); /* Read GINTSTS */ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); // usleep(100000); // mdelay(100); mdelay(1); /* * Send handshake packet */ /* Read HAINT */ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); //fprintf(stderr, "HAINT: %08x\n", haint.d32); /* Read HCINT */ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); /* Read HCCHAR */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); /* Clear HCINT */ dwc_write_reg32(&hc_regs->hcint, hcint.d32); /* Clear HAINT */ dwc_write_reg32(&hc_global_regs->haint, haint.d32); /* Clear GINTSTS */ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); /* Read GINTSTS */ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); /* Make sure channel is disabled */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); if (hcchar.b.chen) { //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32); hcchar.b.chdis = 1; hcchar.b.chen = 1; dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); //sleep(1); mdelay(1000); /* Read GINTSTS */ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); /* Read HAINT */ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); //fprintf(stderr, "HAINT: %08x\n", haint.d32); /* Read HCINT */ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); /* Read HCCHAR */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); /* Clear HCINT */ dwc_write_reg32(&hc_regs->hcint, hcint.d32); /* Clear HAINT */ dwc_write_reg32(&hc_global_regs->haint, haint.d32); /* Clear GINTSTS */ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); //if (hcchar.b.chen) { // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32); //} } /* Set HCTSIZ */ hctsiz.d32 = 0; hctsiz.b.xfersize = 0; hctsiz.b.pktcnt = 1; hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); /* Set HCCHAR */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; hcchar.b.epdir = 0; hcchar.b.epnum = 0; hcchar.b.mps = 8; hcchar.b.chen = 1; dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); /* Wait for host channel interrupt */ do { gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); } while (gintsts.b.hcintr == 0); //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); /* Disable HCINTs */ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); /* Disable HAINTs */ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); /* Read HAINT */ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); //fprintf(stderr, "HAINT: %08x\n", haint.d32); /* Read HCINT */ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); //fprintf(stderr, "HCINT: %08x\n", hcint.d32); /* Read HCCHAR */ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); /* Clear HCINT */ dwc_write_reg32(&hc_regs->hcint, hcint.d32); /* Clear HAINT */ dwc_write_reg32(&hc_global_regs->haint, haint.d32); /* Clear GINTSTS */ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); /* Read GINTSTS */ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); } #endif /* DWC_HS_ELECT_TST */ /** Handles hub class-specific requests. */ int dwc_otg_hcd_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { int retval = 0; dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd(hcd)->core_if; struct usb_hub_descriptor *desc; hprt0_data_t hprt0 = {.d32 = 0}; uint32_t port_status; switch (typeReq) { case ClearHubFeature: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "ClearHubFeature 0x%x\n", wValue); switch (wValue) { case C_HUB_LOCAL_POWER: case C_HUB_OVER_CURRENT: /* Nothing required here */ break; default: retval = -EINVAL; DWC_ERROR("DWC OTG HCD - " "ClearHubFeature request %xh unknown\n", wValue); } break; case ClearPortFeature: if (!wIndex || wIndex > 1) goto error; switch (wValue) { case USB_PORT_FEAT_ENABLE: DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - " "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); hprt0.d32 = dwc_otg_read_hprt0(core_if); hprt0.b.prtena = 1; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); break; case USB_PORT_FEAT_SUSPEND: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); hprt0.d32 = dwc_otg_read_hprt0(core_if); hprt0.b.prtres = 1; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); /* Clear Resume bit */ mdelay(100); hprt0.b.prtres = 0; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); break; case USB_PORT_FEAT_POWER: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "ClearPortFeature USB_PORT_FEAT_POWER\n"); hprt0.d32 = dwc_otg_read_hprt0(core_if); hprt0.b.prtpwr = 0; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); break; case USB_PORT_FEAT_INDICATOR: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); /* Port inidicator not supported */ break; case USB_PORT_FEAT_C_CONNECTION: /* Clears drivers internal connect status change * flag */ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); dwc_otg_hcd->flags.b.port_connect_status_change = 0; break; case USB_PORT_FEAT_C_RESET: /* Clears the driver's internal Port Reset Change * flag */ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); dwc_otg_hcd->flags.b.port_reset_change = 0; break; case USB_PORT_FEAT_C_ENABLE: /* Clears the driver's internal Port * Enable/Disable Change flag */ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); dwc_otg_hcd->flags.b.port_enable_change = 0; break; case USB_PORT_FEAT_C_SUSPEND: /* Clears the driver's internal Port Suspend * Change flag, which is set when resume signaling on * the host port is complete */ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); dwc_otg_hcd->flags.b.port_suspend_change = 0; break; case USB_PORT_FEAT_C_OVER_CURRENT: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); dwc_otg_hcd->flags.b.port_over_current_change = 0; break; default: retval = -EINVAL; DWC_ERROR("DWC OTG HCD - " "ClearPortFeature request %xh " "unknown or unsupported\n", wValue); } break; case GetHubDescriptor: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "GetHubDescriptor\n"); desc = (struct usb_hub_descriptor *)buf; desc->bDescLength = 9; desc->bDescriptorType = 0x29; desc->bNbrPorts = 1; desc->wHubCharacteristics = 0x08; desc->bPwrOn2PwrGood = 1; desc->bHubContrCurrent = 0; desc->u.hs.DeviceRemovable[0] = 0; desc->u.hs.DeviceRemovable[1] = 0xff; break; case GetHubStatus: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "GetHubStatus\n"); memset(buf, 0, 4); break; case GetPortStatus: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "GetPortStatus\n"); if (!wIndex || wIndex > 1) goto error; port_status = 0; if (dwc_otg_hcd->flags.b.port_connect_status_change) port_status |= (1 << USB_PORT_FEAT_C_CONNECTION); if (dwc_otg_hcd->flags.b.port_enable_change) port_status |= (1 << USB_PORT_FEAT_C_ENABLE); if (dwc_otg_hcd->flags.b.port_suspend_change) port_status |= (1 << USB_PORT_FEAT_C_SUSPEND); if (dwc_otg_hcd->flags.b.port_reset_change) port_status |= (1 << USB_PORT_FEAT_C_RESET); if (dwc_otg_hcd->flags.b.port_over_current_change) { DWC_ERROR("Device Not Supported\n"); port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT); } if (!dwc_otg_hcd->flags.b.port_connect_status) { /* * The port is disconnected, which means the core is * either in device mode or it soon will be. Just * return 0's for the remainder of the port status * since the port register can't be read if the core * is in device mode. */ *((__le32 *) buf) = cpu_to_le32(port_status); break; } hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); if (hprt0.b.prtconnsts) port_status |= (1 << USB_PORT_FEAT_CONNECTION); if (hprt0.b.prtena) port_status |= (1 << USB_PORT_FEAT_ENABLE); if (hprt0.b.prtsusp) port_status |= (1 << USB_PORT_FEAT_SUSPEND); if (hprt0.b.prtovrcurract) port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT); if (hprt0.b.prtrst) port_status |= (1 << USB_PORT_FEAT_RESET); if (hprt0.b.prtpwr) port_status |= (1 << USB_PORT_FEAT_POWER); if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) port_status |= (USB_PORT_STAT_HIGH_SPEED); else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) port_status |= (USB_PORT_STAT_LOW_SPEED); if (hprt0.b.prttstctl) port_status |= (1 << USB_PORT_FEAT_TEST); /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ *((__le32 *) buf) = cpu_to_le32(port_status); break; case SetHubFeature: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "SetHubFeature\n"); /* No HUB features supported */ break; case SetPortFeature: if (wValue != USB_PORT_FEAT_TEST && (!wIndex || wIndex > 1)) goto error; if (!dwc_otg_hcd->flags.b.port_connect_status) { /* * The port is disconnected, which means the core is * either in device mode or it soon will be. Just * return without doing anything since the port * register can't be written if the core is in device * mode. */ break; } switch (wValue) { case USB_PORT_FEAT_SUSPEND: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); if (hcd->self.otg_port == wIndex && hcd->self.b_hnp_enable) { gotgctl_data_t gotgctl = {.d32=0}; gotgctl.b.hstsethnpen = 1; dwc_modify_reg32(&core_if->core_global_regs->gotgctl, 0, gotgctl.d32); core_if->op_state = A_SUSPEND; } hprt0.d32 = dwc_otg_read_hprt0(core_if); hprt0.b.prtsusp = 1; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); //DWC_PRINT("SUSPEND: HPRT0=%0x\n", hprt0.d32); /* Suspend the Phy Clock */ { pcgcctl_data_t pcgcctl = {.d32=0}; pcgcctl.b.stoppclk = 1; dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32); } /* For HNP the bus must be suspended for at least 200ms. */ if (hcd->self.b_hnp_enable) { mdelay(200); //DWC_PRINT("SUSPEND: wait complete! (%d)\n", _hcd->state); } break; case USB_PORT_FEAT_POWER: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "SetPortFeature - USB_PORT_FEAT_POWER\n"); hprt0.d32 = dwc_otg_read_hprt0(core_if); hprt0.b.prtpwr = 1; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); break; case USB_PORT_FEAT_RESET: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "SetPortFeature - USB_PORT_FEAT_RESET\n"); hprt0.d32 = dwc_otg_read_hprt0(core_if); /* When B-Host the Port reset bit is set in * the Start HCD Callback function, so that * the reset is started within 1ms of the HNP * success interrupt. */ if (!hcd->self.is_b_host) { hprt0.b.prtrst = 1; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); } /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ MDELAY(60); hprt0.b.prtrst = 0; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); break; #ifdef DWC_HS_ELECT_TST case USB_PORT_FEAT_TEST: { uint32_t t; gintmsk_data_t gintmsk; t = (wIndex >> 8); /* MSB wIndex USB */ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t); warn("USB_PORT_FEAT_TEST %d\n", t); if (t < 6) { hprt0.d32 = dwc_otg_read_hprt0(core_if); hprt0.b.prttstctl = t; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); } else { /* Setup global vars with reg addresses (quick and * dirty hack, should be cleaned up) */ global_regs = core_if->core_global_regs; hc_global_regs = core_if->host_if->host_global_regs; hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500); data_fifo = (uint32_t *)((char *)global_regs + 0x1000); if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */ /* Save current interrupt mask */ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); /* Disable all interrupts while we muck with * the hardware directly */ dwc_write_reg32(&global_regs->gintmsk, 0); /* 15 second delay per the test spec */ mdelay(15000); /* Drive suspend on the root port */ hprt0.d32 = dwc_otg_read_hprt0(core_if); hprt0.b.prtsusp = 1; hprt0.b.prtres = 0; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); /* 15 second delay per the test spec */ mdelay(15000); /* Drive resume on the root port */ hprt0.d32 = dwc_otg_read_hprt0(core_if); hprt0.b.prtsusp = 0; hprt0.b.prtres = 1; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); mdelay(100); /* Clear the resume bit */ hprt0.b.prtres = 0; dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); /* Restore interrupts */ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ /* Save current interrupt mask */ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); /* Disable all interrupts while we muck with * the hardware directly */ dwc_write_reg32(&global_regs->gintmsk, 0); /* 15 second delay per the test spec */ mdelay(15000); /* Send the Setup packet */ do_setup(); /* 15 second delay so nothing else happens for awhile */ mdelay(15000); /* Restore interrupts */ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ /* Save current interrupt mask */ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); /* Disable all interrupts while we muck with * the hardware directly */ dwc_write_reg32(&global_regs->gintmsk, 0); /* Send the Setup packet */ do_setup(); /* 15 second delay so nothing else happens for awhile */ mdelay(15000); /* Send the In and Ack packets */ do_in_ack(); /* 15 second delay so nothing else happens for awhile */ mdelay(15000); /* Restore interrupts */ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); } } break; } #endif /* DWC_HS_ELECT_TST */ case USB_PORT_FEAT_INDICATOR: DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); /* Not supported */ break; default: retval = -EINVAL; DWC_ERROR("DWC OTG HCD - " "SetPortFeature request %xh " "unknown or unsupported\n", wValue); break; } break; default: error: retval = -EINVAL; DWC_WARN("DWC OTG HCD - " "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", typeReq, wIndex, wValue); break; } return retval; } /** * Assigns transactions from a QTD to a free host channel and initializes the * host channel to perform the transactions. The host channel is removed from * the free list. * * @param hcd The HCD state structure. * @param qh Transactions from the first QTD for this QH are selected and * assigned to a free host channel. */ static void assign_and_init_hc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) { dwc_hc_t *hc; dwc_otg_qtd_t *qtd; struct urb *urb; DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, hcd, qh); hc = list_entry(hcd->free_hc_list.next, dwc_hc_t, hc_list_entry); /* Remove the host channel from the free list. */ list_del_init(&hc->hc_list_entry); qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); urb = qtd->urb; qh->channel = hc; qh->qtd_in_process = qtd; /* * Use usb_pipedevice to determine device address. This address is * 0 before the SET_ADDRESS command and the correct address afterward. */ hc->dev_addr = usb_pipedevice(urb->pipe); hc->ep_num = usb_pipeendpoint(urb->pipe); if (urb->dev->speed == USB_SPEED_LOW) { hc->speed = DWC_OTG_EP_SPEED_LOW; } else if (urb->dev->speed == USB_SPEED_FULL) { hc->speed = DWC_OTG_EP_SPEED_FULL; } else { hc->speed = DWC_OTG_EP_SPEED_HIGH; } hc->max_packet = dwc_max_packet(qh->maxp); hc->xfer_started = 0; hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; hc->error_state = (qtd->error_count > 0); hc->halt_on_queue = 0; hc->halt_pending = 0; hc->requests = 0; /* * The following values may be modified in the transfer type section * below. The xfer_len value may be reduced when the transfer is * started to accommodate the max widths of the XferSize and PktCnt * fields in the HCTSIZn register. */ hc->do_ping = qh->ping_state; hc->ep_is_in = (usb_pipein(urb->pipe) != 0); hc->data_pid_start = qh->data_toggle; hc->multi_count = 1; if (hcd->core_if->dma_enable) { hc->xfer_buff = (uint8_t *)urb->transfer_dma + urb->actual_length; } else { hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length; } hc->xfer_len = urb->transfer_buffer_length - urb->actual_length; hc->xfer_count = 0; /* * Set the split attributes */ hc->do_split = 0; if (qh->do_split) { hc->do_split = 1; hc->xact_pos = qtd->isoc_split_pos; hc->complete_split = qtd->complete_split; hc->hub_addr = urb->dev->tt->hub->devnum; hc->port_addr = urb->dev->ttport; } switch (usb_pipetype(urb->pipe)) { case PIPE_CONTROL: hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; switch (qtd->control_phase) { case DWC_OTG_CONTROL_SETUP: DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n"); hc->do_ping = 0; hc->ep_is_in = 0; hc->data_pid_start = DWC_OTG_HC_PID_SETUP; if (hcd->core_if->dma_enable) { hc->xfer_buff = (uint8_t *)urb->setup_dma; } else { hc->xfer_buff = (uint8_t *)urb->setup_packet; } hc->xfer_len = 8; break; case DWC_OTG_CONTROL_DATA: DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); hc->data_pid_start = qtd->data_toggle; break; case DWC_OTG_CONTROL_STATUS: /* * Direction is opposite of data direction or IN if no * data. */ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n"); if (urb->transfer_buffer_length == 0) { hc->ep_is_in = 1; } else { hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN); } if (hc->ep_is_in) { hc->do_ping = 0; } hc->data_pid_start = DWC_OTG_HC_PID_DATA1; hc->xfer_len = 0; if (hcd->core_if->dma_enable) { hc->xfer_buff = (uint8_t *)hcd->status_buf_dma; } else { hc->xfer_buff = (uint8_t *)hcd->status_buf; } break; } break; case PIPE_BULK: hc->ep_type = DWC_OTG_EP_TYPE_BULK; break; case PIPE_INTERRUPT: hc->ep_type = DWC_OTG_EP_TYPE_INTR; break; case PIPE_ISOCHRONOUS: { struct usb_iso_packet_descriptor *frame_desc; frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index]; hc->ep_type = DWC_OTG_EP_TYPE_ISOC; if (hcd->core_if->dma_enable) { hc->xfer_buff = (uint8_t *)urb->transfer_dma; } else { hc->xfer_buff = (uint8_t *)urb->transfer_buffer; } hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset; hc->xfer_len = frame_desc->length - qtd->isoc_split_offset; if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) { if (hc->xfer_len <= 188) { hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL; } else { hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN; } } } break; } if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { /* * This value may be modified when the transfer is started to * reflect the actual transfer length. */ hc->multi_count = dwc_hb_mult(qh->maxp); } dwc_otg_hc_init(hcd->core_if, hc); hc->qh = qh; } /** * This function selects transactions from the HCD transfer schedule and * assigns them to available host channels. It is called from HCD interrupt * handler functions. * * @param hcd The HCD state structure. * * @return The types of new transactions that were assigned to host channels. */ dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd) { struct list_head *qh_ptr; dwc_otg_qh_t *qh; int num_channels; dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; #ifdef DEBUG_SOF DWC_DEBUGPL(DBG_HCD, " Select Transactions\n"); #endif spin_lock(&hcd->lock); /* Process entries in the periodic ready list. */ qh_ptr = hcd->periodic_sched_ready.next; while (qh_ptr != &hcd->periodic_sched_ready && !list_empty(&hcd->free_hc_list)) { qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); assign_and_init_hc(hcd, qh); /* * Move the QH from the periodic ready schedule to the * periodic assigned schedule. */ qh_ptr = qh_ptr->next; list_move(&qh->qh_list_entry, &hcd->periodic_sched_assigned); ret_val = DWC_OTG_TRANSACTION_PERIODIC; } /* * Process entries in the inactive portion of the non-periodic * schedule. Some free host channels may not be used if they are * reserved for periodic transfers. */ qh_ptr = hcd->non_periodic_sched_inactive.next; num_channels = hcd->core_if->core_params->host_channels; while (qh_ptr != &hcd->non_periodic_sched_inactive && (hcd->non_periodic_channels < num_channels - hcd->periodic_channels) && !list_empty(&hcd->free_hc_list)) { qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); assign_and_init_hc(hcd, qh); /* * Move the QH from the non-periodic inactive schedule to the * non-periodic active schedule. */ qh_ptr = qh_ptr->next; list_move(&qh->qh_list_entry, &hcd->non_periodic_sched_active); if (ret_val == DWC_OTG_TRANSACTION_NONE) { ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC; } else { ret_val = DWC_OTG_TRANSACTION_ALL; } hcd->non_periodic_channels++; } spin_unlock(&hcd->lock); return ret_val; } /** * Attempts to queue a single transaction request for a host channel * associated with either a periodic or non-periodic transfer. This function * assumes that there is space available in the appropriate request queue. For * an OUT transfer or SETUP transaction in Slave mode, it checks whether space * is available in the appropriate Tx FIFO. * * @param hcd The HCD state structure. * @param hc Host channel descriptor associated with either a periodic or * non-periodic transfer. * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic * transfers. * * @return 1 if a request is queued and more requests may be needed to * complete the transfer, 0 if no more requests are required for this * transfer, -1 if there is insufficient space in the Tx FIFO. */ static int queue_transaction(dwc_otg_hcd_t *hcd, dwc_hc_t *hc, uint16_t fifo_dwords_avail) { int retval; if (hcd->core_if->dma_enable) { if (!hc->xfer_started) { dwc_otg_hc_start_transfer(hcd->core_if, hc); hc->qh->ping_state = 0; } retval = 0; } else if (hc->halt_pending) { /* Don't queue a request if the channel has been halted. */ retval = 0; } else if (hc->halt_on_queue) { dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status); retval = 0; } else if (hc->do_ping) { if (!hc->xfer_started) { dwc_otg_hc_start_transfer(hcd->core_if, hc); } retval = 0; } else if (!hc->ep_is_in || hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { if ((fifo_dwords_avail * 4) >= hc->max_packet) { if (!hc->xfer_started) { dwc_otg_hc_start_transfer(hcd->core_if, hc); retval = 1; } else { retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc); } } else { retval = -1; } } else { if (!hc->xfer_started) { dwc_otg_hc_start_transfer(hcd->core_if, hc); retval = 1; } else { retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc); } } return retval; } /** * Processes active non-periodic channels and queues transactions for these * channels to the DWC_otg controller. After queueing transactions, the NP Tx * FIFO Empty interrupt is enabled if there are more transactions to queue as * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx * FIFO Empty interrupt is disabled. */ static void process_non_periodic_channels(dwc_otg_hcd_t *hcd) { gnptxsts_data_t tx_status; struct list_head *orig_qh_ptr; dwc_otg_qh_t *qh; int status; int no_queue_space = 0; int no_fifo_space = 0; int more_to_do = 0; dwc_otg_core_global_regs_t *global_regs = hcd->core_if->core_global_regs; DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); #ifdef DEBUG tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n", tx_status.b.nptxqspcavail); DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n", tx_status.b.nptxfspcavail); #endif /* * Keep track of the starting point. Skip over the start-of-list * entry. */ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; } orig_qh_ptr = hcd->non_periodic_qh_ptr; /* * Process once through the active list or until no more space is * available in the request queue or the Tx FIFO. */ do { tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) { no_queue_space = 1; break; } qh = list_entry(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry); status = queue_transaction(hcd, qh->channel, tx_status.b.nptxfspcavail); if (status > 0) { more_to_do = 1; } else if (status < 0) { no_fifo_space = 1; break; } /* Advance to next QH, skipping start-of-list entry. */ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; } } while (hcd->non_periodic_qh_ptr != orig_qh_ptr); if (!hcd->core_if->dma_enable) { gintmsk_data_t intr_mask = {.d32 = 0}; intr_mask.b.nptxfempty = 1; #ifdef DEBUG tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n", tx_status.b.nptxqspcavail); DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n", tx_status.b.nptxfspcavail); #endif if (more_to_do || no_queue_space || no_fifo_space) { /* * May need to queue more transactions as the request * queue or Tx FIFO empties. Enable the non-periodic * Tx FIFO empty interrupt. (Always use the half-empty * level to ensure that new requests are loaded as * soon as possible.) */ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32); } else { /* * Disable the Tx FIFO empty interrupt since there are * no more transactions that need to be queued right * now. This function is called from interrupt * handlers to queue more transactions as transfer * states change. */ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); } } } /** * Processes periodic channels for the next frame and queues transactions for * these channels to the DWC_otg controller. After queueing transactions, the * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions * to queue as Periodic Tx FIFO or request queue space becomes available. * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. */ static void process_periodic_channels(dwc_otg_hcd_t *hcd) { hptxsts_data_t tx_status; struct list_head *qh_ptr; dwc_otg_qh_t *qh; int status; int no_queue_space = 0; int no_fifo_space = 0; dwc_otg_host_global_regs_t *host_regs; host_regs = hcd->core_if->host_if->host_global_regs; DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); #ifdef DEBUG tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n", tx_status.b.ptxqspcavail); DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n", tx_status.b.ptxfspcavail); #endif qh_ptr = hcd->periodic_sched_assigned.next; while (qh_ptr != &hcd->periodic_sched_assigned) { tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); if (tx_status.b.ptxqspcavail == 0) { no_queue_space = 1; break; } qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); /* * Set a flag if we're queuing high-bandwidth in slave mode. * The flag prevents any halts to get into the request queue in * the middle of multiple high-bandwidth packets getting queued. */ if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) { hcd->core_if->queuing_high_bandwidth = 1; } status = queue_transaction(hcd, qh->channel, tx_status.b.ptxfspcavail); if (status < 0) { no_fifo_space = 1; break; } /* * In Slave mode, stay on the current transfer until there is * nothing more to do or the high-bandwidth request count is * reached. In DMA mode, only need to queue one request. The * controller automatically handles multiple packets for * high-bandwidth transfers. */ if (hcd->core_if->dma_enable || status == 0 || qh->channel->requests == qh->channel->multi_count) { qh_ptr = qh_ptr->next; /* * Move the QH from the periodic assigned schedule to * the periodic queued schedule. */ list_move(&qh->qh_list_entry, &hcd->periodic_sched_queued); /* done queuing high bandwidth */ hcd->core_if->queuing_high_bandwidth = 0; } } if (!hcd->core_if->dma_enable) { dwc_otg_core_global_regs_t *global_regs; gintmsk_data_t intr_mask = {.d32 = 0}; global_regs = hcd->core_if->core_global_regs; intr_mask.b.ptxfempty = 1; #ifdef DEBUG tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (after queue): %d\n", tx_status.b.ptxqspcavail); DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (after queue): %d\n", tx_status.b.ptxfspcavail); #endif if (!list_empty(&hcd->periodic_sched_assigned) || no_queue_space || no_fifo_space) { /* * May need to queue more transactions as the request * queue or Tx FIFO empties. Enable the periodic Tx * FIFO empty interrupt. (Always use the half-empty * level to ensure that new requests are loaded as * soon as possible.) */ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32); } else { /* * Disable the Tx FIFO empty interrupt since there are * no more transactions that need to be queued right * now. This function is called from interrupt * handlers to queue more transactions as transfer * states change. */ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); } } } /** * This function processes the currently active host channels and queues * transactions for these channels to the DWC_otg controller. It is called * from HCD interrupt handler functions. * * @param hcd The HCD state structure. * @param tr_type The type(s) of transactions to queue (non-periodic, * periodic, or both). */ void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd, dwc_otg_transaction_type_e tr_type) { #ifdef DEBUG_SOF DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); #endif /* Process host channels associated with periodic transfers. */ if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC || tr_type == DWC_OTG_TRANSACTION_ALL) && !list_empty(&hcd->periodic_sched_assigned)) { process_periodic_channels(hcd); } /* Process host channels associated with non-periodic transfers. */ if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC || tr_type == DWC_OTG_TRANSACTION_ALL) { if (!list_empty(&hcd->non_periodic_sched_active)) { process_non_periodic_channels(hcd); } else { /* * Ensure NP Tx FIFO empty interrupt is disabled when * there are no non-periodic transfers to process. */ gintmsk_data_t gintmsk = {.d32 = 0}; gintmsk.b.nptxfempty = 1; dwc_modify_reg32(&hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0); } } } /** * Sets the final status of an URB and returns it to the device driver. Any * required cleanup of the URB is performed. */ void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *hcd, struct urb *urb, int status) { #ifdef DEBUG if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n", __func__, urb, usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe), usb_pipein(urb->pipe) ? "IN" : "OUT", status); if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { int i; for (i = 0; i < urb->number_of_packets; i++) { DWC_PRINT(" ISO Desc %d status: %d\n", i, urb->iso_frame_desc[i].status); } } } #endif //if we use the aligned buffer instead of the original unaligned buffer, //for IN data, we have to move the data to the original buffer if((urb->transfer_dma==urb->aligned_transfer_dma)&&((urb->transfer_flags & URB_DIR_MASK)==URB_DIR_IN)){ dma_sync_single_for_device(NULL,urb->transfer_dma,urb->actual_length,DMA_FROM_DEVICE); memcpy(urb->transfer_buffer,urb->aligned_transfer_buffer,urb->actual_length); } urb->status = status; urb->hcpriv = NULL; usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status); } /* * Returns the Queue Head for an URB. */ dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb) { struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb); return (dwc_otg_qh_t *)ep->hcpriv; } #ifdef DEBUG void dwc_print_setup_data(uint8_t *setup) { int i; if (CHK_DEBUG_LEVEL(DBG_HCD)){ DWC_PRINT("Setup Data = MSB "); for (i = 7; i >= 0; i--) DWC_PRINT("%02x ", setup[i]); DWC_PRINT("\n"); DWC_PRINT(" bmRequestType Tranfer = %s\n", (setup[0] & 0x80) ? "Device-to-Host" : "Host-to-Device"); DWC_PRINT(" bmRequestType Type = "); switch ((setup[0] & 0x60) >> 5) { case 0: DWC_PRINT("Standard\n"); break; case 1: DWC_PRINT("Class\n"); break; case 2: DWC_PRINT("Vendor\n"); break; case 3: DWC_PRINT("Reserved\n"); break; } DWC_PRINT(" bmRequestType Recipient = "); switch (setup[0] & 0x1f) { case 0: DWC_PRINT("Device\n"); break; case 1: DWC_PRINT("Interface\n"); break; case 2: DWC_PRINT("Endpoint\n"); break; case 3: DWC_PRINT("Other\n"); break; default: DWC_PRINT("Reserved\n"); break; } DWC_PRINT(" bRequest = 0x%0x\n", setup[1]); DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *)&setup[2])); DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *)&setup[4])); DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *)&setup[6])); } } #endif void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd) { } void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd) { #ifdef DEBUG int num_channels; int i; gnptxsts_data_t np_tx_status; hptxsts_data_t p_tx_status; num_channels = hcd->core_if->core_params->host_channels; DWC_PRINT("\n"); DWC_PRINT("************************************************************\n"); DWC_PRINT("HCD State:\n"); DWC_PRINT(" Num channels: %d\n", num_channels); for (i = 0; i < num_channels; i++) { dwc_hc_t *hc = hcd->hc_ptr_array[i]; DWC_PRINT(" Channel %d:\n", i); DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", hc->dev_addr, hc->ep_num, hc->ep_is_in); DWC_PRINT(" speed: %d\n", hc->speed); DWC_PRINT(" ep_type: %d\n", hc->ep_type); DWC_PRINT(" max_packet: %d\n", hc->max_packet); DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start); DWC_PRINT(" multi_count: %d\n", hc->multi_count); DWC_PRINT(" xfer_started: %d\n", hc->xfer_started); DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff); DWC_PRINT(" xfer_len: %d\n", hc->xfer_len); DWC_PRINT(" xfer_count: %d\n", hc->xfer_count); DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue); DWC_PRINT(" halt_pending: %d\n", hc->halt_pending); DWC_PRINT(" halt_status: %d\n", hc->halt_status); DWC_PRINT(" do_split: %d\n", hc->do_split); DWC_PRINT(" complete_split: %d\n", hc->complete_split); DWC_PRINT(" hub_addr: %d\n", hc->hub_addr); DWC_PRINT(" port_addr: %d\n", hc->port_addr); DWC_PRINT(" xact_pos: %d\n", hc->xact_pos); DWC_PRINT(" requests: %d\n", hc->requests); DWC_PRINT(" qh: %p\n", hc->qh); if (hc->xfer_started) { hfnum_data_t hfnum; hcchar_data_t hcchar; hctsiz_data_t hctsiz; hcint_data_t hcint; hcintmsk_data_t hcintmsk; hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum); hcchar.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcchar); hctsiz.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hctsiz); hcint.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcint); hcintmsk.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcintmsk); DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32); DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32); DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32); DWC_PRINT(" hcint: 0x%08x\n", hcint.d32); DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32); } if (hc->xfer_started && hc->qh && hc->qh->qtd_in_process) { dwc_otg_qtd_t *qtd; struct urb *urb; qtd = hc->qh->qtd_in_process; urb = qtd->urb; DWC_PRINT(" URB Info:\n"); DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb); if (urb) { DWC_PRINT(" Dev: %d, EP: %d %s\n", usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe), usb_pipein(urb->pipe) ? "IN" : "OUT"); DWC_PRINT(" Max packet size: %d\n", usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); DWC_PRINT(" transfer_buffer: %p\n", urb->transfer_buffer); DWC_PRINT(" transfer_dma: %p\n", (void *)urb->transfer_dma); DWC_PRINT(" transfer_buffer_length: %d\n", urb->transfer_buffer_length); DWC_PRINT(" actual_length: %d\n", urb->actual_length); } } } DWC_PRINT(" non_periodic_channels: %d\n", hcd->non_periodic_channels); DWC_PRINT(" periodic_channels: %d\n", hcd->periodic_channels); DWC_PRINT(" periodic_usecs: %d\n", hcd->periodic_usecs); np_tx_status.d32 = dwc_read_reg32(&hcd->core_if->core_global_regs->gnptxsts); DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail); DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail); p_tx_status.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hptxsts); DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail); DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail); dwc_otg_hcd_dump_frrem(hcd); dwc_otg_dump_global_registers(hcd->core_if); dwc_otg_dump_host_registers(hcd->core_if); DWC_PRINT("************************************************************\n"); DWC_PRINT("\n"); #endif } #endif /* DWC_DEVICE_ONLY */