--- a/arch/mips/bcm63xx/cpu.c +++ b/arch/mips/bcm63xx/cpu.c @@ -260,8 +260,10 @@ static unsigned int detect_memory_size(v unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0; u32 val; - if (BCMCPU_IS_6345()) - return (8 * 1024 * 1024); + if (BCMCPU_IS_6345()) { + val = bcm_sdram_readl(SDRAM_MBASE_REG); + return (val * 8 * 1024 * 1024); + } if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { val = bcm_sdram_readl(SDRAM_CFG_REG); --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -734,6 +734,8 @@ #define SDRAM_CFG_BANK_SHIFT 13 #define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT) +#define SDRAM_MBASE_REG 0xc + #define SDRAM_PRIO_REG 0x2C #define SDRAM_PRIO_MIPS_SHIFT 29 #define SDRAM_PRIO_MIPS_MASK (1 << SDRAM_PRIO_MIPS_SHIFT) --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -709,15 +709,9 @@ void __init board_prom_init(void) char cfe_version[32]; u32 val; - /* read base address of boot chip select (0) - * 6345 does not have MPI but boots from standard - * MIPS Flash address */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; - else { - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; - } + /* read base address of boot chip select (0) */ + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; boot_addr = (u8 *)KSEG1ADDR(val); /* dump cfe version */ @@ -893,12 +887,9 @@ int __init board_register_devices(void) bcm63xx_dsp_register(&board.dsp); /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; - else { - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; - } + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; + mtd_resources[0].start = val; mtd_resources[0].end = 0x1FFFFFFF; --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h @@ -163,7 +163,7 @@ enum bcm63xx_regs_set { #define BCM_6345_ENET0_BASE (0xfffe1800) #define BCM_6345_ENETDMA_BASE (0xfffe2800) #define BCM_6345_PCMCIA_BASE (0xfffe2028) -#define BCM_6345_MPI_BASE (0xdeadbeef) +#define BCM_6345_MPI_BASE (0xfffe2000) #define BCM_6345_OHCI0_BASE (0xfffe2100) #define BCM_6345_OHCI_PRIV_BASE (0xfffe2200) #define BCM_6345_USBH_PRIV_BASE (0xdeadbeef) --- a/arch/mips/bcm63xx/gpio.c +++ b/arch/mips/bcm63xx/gpio.c @@ -4,7 +4,7 @@ * for more details. * * Copyright (C) 2008 Maxime Bizon - * Copyright (C) 2008 Florian Fainelli + * Copyright (C) 2008-2011 Florian Fainelli */ #include @@ -33,7 +33,10 @@ static void bcm63xx_gpio_set(struct gpio BUG(); if (gpio < 32) { - reg = GPIO_DATA_LO_REG; + if (!BCMCPU_IS_6345()) + reg = GPIO_DATA_LO_REG; + else + reg = GPIO_DATA_HI_REG; mask = 1 << gpio; v = &gpio_out_low; } else { @@ -60,7 +63,10 @@ static int bcm63xx_gpio_get(struct gpio_ BUG(); if (gpio < 32) { - reg = GPIO_DATA_LO_REG; + if (!BCMCPU_IS_6345()) + reg = GPIO_DATA_LO_REG; + else + reg = GPIO_DATA_HI_REG; mask = 1 << gpio; } else { reg = GPIO_DATA_HI_REG; @@ -125,7 +131,11 @@ static struct gpio_chip bcm63xx_gpio_chi int __init bcm63xx_gpio_init(void) { - gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG); + if (!BCMCPU_IS_6345()) + gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG); + else + gpio_out_low = bcm_gpio_readl(GPIO_DATA_HI_REG); + gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG); bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count(); pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);