/* * BCM47XX Sonics SiliconBackplane MIPS core routines * * Copyright 2007, Broadcom Corporation * All Rights Reserved. * * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* sbipsflag register format, indexed by irq. */ static const uint32 sbips_int_mask[] = { 0, /* placeholder */ SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK }; static const uint32 sbips_int_shift[] = { 0, /* placeholder */ SBIPS_INT1_SHIFT, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT }; /* * Map SB cores sharing the MIPS hardware IRQ0 to virtual dedicated OS IRQs. * Per-port BSP code is required to provide necessary translations between * the shared MIPS IRQ and the virtual OS IRQs based on SB core flag. * * See sb_irq() for the mapping. */ static uint shirq_map_base = 0; /* Returns the SB interrupt flag of the current core. */ static uint32 sb_getflag(sb_t * sbh) { osl_t *osh; void *regs; sbconfig_t *sb; osh = sb_osh(sbh); regs = sb_coreregs(sbh); sb = (sbconfig_t *) ((ulong) regs + SBCONFIGOFF); return (R_REG(osh, &sb->sbtpsflag) & SBTPS_NUM0_MASK); } /* * Returns the MIPS IRQ assignment of the current core. If unassigned, * 0 is returned. */ uint sb_irq(sb_t * sbh) { osl_t *osh; uint idx; void *regs; sbconfig_t *sb; uint32 flag, sbipsflag; uint irq = 0; osh = sb_osh(sbh); flag = sb_getflag(sbh); idx = sb_coreidx(sbh); if ((regs = sb_setcore(sbh, SB_MIPS, 0)) || (regs = sb_setcore(sbh, SB_MIPS33, 0))) { sb = (sbconfig_t *) ((ulong) regs + SBCONFIGOFF); /* sbipsflag specifies which core is routed to interrupts 1 to 4 */ sbipsflag = R_REG(osh, &sb->sbipsflag); for (irq = 1; irq <= 4; irq++) { if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag) break; } if (irq == 5) irq = 0; } sb_setcoreidx(sbh, idx); return irq; } /* Clears the specified MIPS IRQ. */ static void BCMINITFN(sb_clearirq) (sb_t * sbh, uint irq) { osl_t *osh; void *regs; sbconfig_t *sb; osh = sb_osh(sbh); if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && !(regs = sb_setcore(sbh, SB_MIPS33, 0))) ASSERT(regs); sb = (sbconfig_t *) ((ulong) regs + SBCONFIGOFF); if (irq == 0) W_REG(osh, &sb->sbintvec, 0); else OR_REG(osh, &sb->sbipsflag, sbips_int_mask[irq]); } /* * Assigns the specified MIPS IRQ to the specified core. Shared MIPS * IRQ 0 may be assigned more than once. * * The old assignment to the specified core is removed first. */ static void BCMINITFN(sb_setirq) (sb_t * sbh, uint irq, uint coreid, uint coreunit) { osl_t *osh; void *regs; sbconfig_t *sb; uint32 flag; uint oldirq; osh = sb_osh(sbh); regs = sb_setcore(sbh, coreid, coreunit); ASSERT(regs); flag = sb_getflag(sbh); oldirq = sb_irq(sbh); if (oldirq) sb_clearirq(sbh, oldirq); if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) && !(regs = sb_setcore(sbh, SB_MIPS33, 0))) ASSERT(regs); sb = (sbconfig_t *) ((ulong) regs + SBCONFIGOFF); if (!oldirq) AND_REG(osh, &sb->sbintvec, ~(1 << flag)); if (irq == 0) OR_REG(osh, &sb->sbintvec, 1 << flag); else { flag <<= sbips_int_shift[irq]; ASSERT(!(flag & ~sbips_int_mask[irq])); flag |= R_REG(osh, &sb->sbipsflag) & ~sbips_int_mask[irq]; W_REG(osh, &sb->sbipsflag, flag); } } /* * Initializes clocks and interrupts. SB and NVRAM access must be * initialized prior to calling. * * 'shirqmap' enables virtual dedicated OS IRQ mapping if non-zero. */ void BCMINITFN(sb_mips_init) (sb_t * sbh, uint shirqmap) { osl_t *osh; ulong hz, ns, tmp; extifregs_t *eir; chipcregs_t *cc; char *value; uint irq; osh = sb_osh(sbh); /* Figure out current SB clock speed */ if ((hz = sb_clock(sbh)) == 0) hz = 100000000; ns = 1000000000 / hz; /* Setup external interface timing */ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) { /* Initialize extif so we can get to the LEDs and external UART */ W_REG(osh, &eir->prog_config, CF_EN); /* Set timing for the flash */ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ W_REG(osh, &eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ /* Set programmable interface timing for external uart */ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ W_REG(osh, &eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) { /* Set timing for the flash */ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */ tmp |= CEIL(120, ns); /* W0 = 120nS */ if ((sb_corerev(sbh) < 9) || (sb_chip(sbh) == 0x5365)) W_REG(osh, &cc->flash_waitcount, tmp); if ((sb_corerev(sbh) < 9) || ((sb_chip(sbh) == BCM5350_CHIP_ID) && sb_chiprev(sbh) == 0) || (sb_chip(sbh) == 0x5365)) { W_REG(osh, &cc->pcmcia_memwait, tmp); } /* Save shared IRQ mapping base */ shirq_map_base = shirqmap; } /* Chip specific initialization */ switch (sb_chip(sbh)) { case BCM4710_CHIP_ID: /* Clear interrupt map */ for (irq = 0; irq <= 4; irq++) sb_clearirq(sbh, irq); sb_setirq(sbh, 0, SB_CODEC, 0); sb_setirq(sbh, 0, SB_EXTIF, 0); sb_setirq(sbh, 2, SB_ENET, 1); sb_setirq(sbh, 3, SB_ILINE20, 0); sb_setirq(sbh, 4, SB_PCI, 0); ASSERT(eir); value = nvram_get("et0phyaddr"); if (value && !strcmp(value, "31")) { /* Enable internal UART */ W_REG(osh, &eir->corecontrol, CC_UE); /* Give USB its own interrupt */ sb_setirq(sbh, 1, SB_USB, 0); } else { /* Disable internal UART */ W_REG(osh, &eir->corecontrol, 0); /* Give Ethernet its own interrupt */ sb_setirq(sbh, 1, SB_ENET, 0); sb_setirq(sbh, 0, SB_USB, 0); } break; case BCM5350_CHIP_ID: /* Clear interrupt map */ for (irq = 0; irq <= 4; irq++) sb_clearirq(sbh, irq); sb_setirq(sbh, 0, SB_CC, 0); sb_setirq(sbh, 0, SB_MIPS33, 0); sb_setirq(sbh, 1, SB_D11, 0); sb_setirq(sbh, 2, SB_ENET, 0); sb_setirq(sbh, 3, SB_PCI, 0); sb_setirq(sbh, 4, SB_USB, 0); break; case BCM4785_CHIP_ID: /* Reassign PCI to irq 4 */ sb_setirq(sbh, 4, SB_PCI, 0); break; } } uint32 BCMINITFN(sb_cpu_clock)(sb_t *sbh) { extifregs_t *eir; chipcregs_t *cc; uint32 n, m; uint idx; uint32 pll_type, rate = 0; /* get index of the current core */ idx = sb_coreidx(sbh); pll_type = PLL_TYPE1; /* switch to extif or chipc core */ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { n = R_REG(osh, &eir->clockcontrol_n); m = R_REG(osh, &eir->clockcontrol_sb); } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { /* 5354 chip uses a non programmable PLL of frequency 240MHz */ if (sb_chip(sbh) == BCM5354_CHIP_ID) { rate = 240000000; goto out; } pll_type = R_REG(osh, &cc->capabilities) & CC_CAP_PLL_MASK; n = R_REG(osh, &cc->clockcontrol_n); if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4) || (pll_type == PLL_TYPE6) || (pll_type == PLL_TYPE7)) m = R_REG(osh, &cc->clockcontrol_m3); else if (pll_type == PLL_TYPE5) { rate = 200000000; goto out; } else if (pll_type == PLL_TYPE3) { if (sb_chip(sbh) == BCM5365_CHIP_ID) { rate = 200000000; goto out; } /* 5350 uses m2 to control mips */ else m = R_REG(osh, &cc->clockcontrol_m2); } else m = R_REG(osh, &cc->clockcontrol_sb); } else goto out; /* calculate rate */ if (sb_chip(sbh) == 0x5365) rate = 100000000; else rate = sb_clock_rate(pll_type, n, m); if (pll_type == PLL_TYPE6) rate = SB2MIPS_T6(rate); out: /* switch back to previous core */ sb_setcoreidx(sbh, idx); return rate; } #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) static void BCMINITFN(handler) (void) { __asm__(".set\tmips32\n\t" "ssnop\n\t" "ssnop\n\t" /* Disable interrupts */ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */ "mfc0 $15, $12\n\t" /* Just a Hack to not to use reg 'at' which was causing problems on 4704 A2 */ "li $14, -31746\n\t" "and $15, $15, $14\n\t" "mtc0 $15, $12\n\t" "eret\n\t" "nop\n\t" "nop\n\t" ".set\tmips0"); } /* The following MUST come right after handler() */ static void BCMINITFN(afterhandler) (void) { } /* * Set the MIPS, backplane and PCI clocks as closely as possible. * * MIPS clocks synchronization function has been moved from PLL in chipcommon * core rev. 15 to a DLL inside the MIPS core in 4785. */ bool BCMINITFN(sb_mips_setclock) (sb_t * sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock) { extifregs_t *eir = NULL; chipcregs_t *cc = NULL; mipsregs_t *mipsr = NULL; volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci, *clockcontrol_m2; uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, orig_ratio_cfg; uint32 pll_type, sync_mode; uint ic_size, ic_lsize; uint idx, i; /* PLL configuration: type 1 */ typedef struct { uint32 mipsclock; uint16 n; uint32 sb; uint32 pci33; uint32 pci25; } n3m_table_t; static n3m_table_t BCMINITDATA(type1_table)[] = { /* 96.000 32.000 24.000 */ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011}, /* 100.000 33.333 25.000 */ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011}, /* 104.000 31.200 24.960 */ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009}, /* 108.000 32.400 24.923 */ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802}, /* 112.000 32.000 24.889 */ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403}, /* 115.200 32.000 24.000 */ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011}, /* 120.000 30.000 24.000 */ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011}, /* 124.800 31.200 24.960 */ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009}, /* 128.000 32.000 24.000 */ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305}, /* 132.000 33.000 24.750 */ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305}, /* 136.000 32.640 24.727 */ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603}, /* 140.000 30.000 24.706 */ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02}, /* 144.000 30.857 24.686 */ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021}, /* 150.857 33.000 24.000 */ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605}, /* 152.000 32.571 24.000 */ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02}, /* 156.000 31.200 24.960 */ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009}, /* 160.000 32.000 24.000 */ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309}, /* 163.200 32.640 24.727 */ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603}, /* 168.000 32.000 24.889 */ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403}, /* 176.000 33.000 24.000 */ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602},}; /* PLL configuration: type 3 */ typedef struct { uint32 mipsclock; uint16 n; uint32 m2; /* that is the clockcontrol_m2 */ } type3_table_t; static type3_table_t type3_table[] = { /* for 5350, mips clock is always double sb clock */ {150000000, 0x311, 0x4020005}, {200000000, 0x311, 0x4020003}, }; /* PLL configuration: type 2, 4, 7 */ typedef struct { uint32 mipsclock; uint32 sbclock; uint32 pciclock; uint16 n; uint32 sb; uint32 pci33; uint32 m2; uint32 m3; uint32 ratio_cfg; uint32 ratio_parm; uint32 d11_r1; uint32 d11_r2; } n4m_table_t; static n4m_table_t BCMINITDATA(type2_table)[] = { { 120000000, 60000000, 32000000, 0x0303, 0x01000200, 0x01000600, 0x01000200, 0x05000200, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 150000000, 75000000, 33333333, 0x0303, 0x01000100, 0x01000600, 0x01000100, 0x05000100, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 180000000, 80000000, 30000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 8, 0x012a00a9, 9 /* ratio 4/9 */ , 0x012a00a9}, { 180000000, 90000000, 30000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 200000000, 100000000, 33333333, 0x0303, 0x02010000, 0x02040001, 0x02010000, 0x06000001, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 211200000, 105600000, 30171428, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 220800000, 110400000, 31542857, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 230400000, 115200000, 32000000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 234000000, 104000000, 31200000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 8, 0x012a00a9, 9 /* ratio 4/9 */ , 0x012a00a9}, { 240000000, 120000000, 33333333, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 252000000, 126000000, 33333333, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 264000000, 132000000, 33000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 270000000, 120000000, 30000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9, 9 /* ratio 4/9 */ , 0x012a00a9}, { 276000000, 122666666, 31542857, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9, 9 /* ratio 4/9 */ , 0x012a00a9}, { 280000000, 140000000, 31111111, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 288000000, 128000000, 32914285, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 8, 0x012a00a9, 9 /* ratio 4/9 */ , 0x012a00a9}, { 288000000, 144000000, 32000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 300000000, 133333333, 33333333, 0x0803, 0x01010000, 0x01020600, 0x01010100, 0x05000100, 8, 0x012a00a9, 9 /* ratio 4/9 */ , 0x012a00a9}, { 300000000, 133333333, 37500000, 0x0803, 0x01010000, 0x01020500, 0x01010100, 0x05000100, 8, 0x012a00a9, 9 /* ratio 4/9 */ , 0x012a00a9}, { 300000000, 133333333, 42857142, 0x0803, 0x01010000, 0x01020400, 0x01010100, 0x05000100, 8, 0x012a00a9, 9 /* ratio 4/9 */ , 0x012a00a9}, { 300000000, 133333333, 50000000, 0x0803, 0x01010000, 0x01020300, 0x01010100, 0x05000100, 8, 0x012a00a9, 9 /* ratio 4/9 */ , 0x012a00a9}, { 300000000, 133333333, 60000000, 0x0803, 0x01010000, 0x01020200, 0x01010100, 0x05000100, 8, 0x012a00a9, 9 /* ratio 4/9 */ , 0x012a00a9}, { 300000000, 150000000, 33333333, 0x0803, 0x01000100, 0x01020600, 0x01010100, 0x05000100, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 300000000, 150000000, 37500000, 0x0803, 0x01000100, 0x01020500, 0x01010100, 0x05000100, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 300000000, 150000000, 42857142, 0x0803, 0x01000100, 0x01020400, 0x01010100, 0x05000100, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 300000000, 150000000, 50000000, 0x0803, 0x01000100, 0x01020300, 0x01010100, 0x05000100, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 300000000, 150000000, 60000000, 0x0803, 0x01000100, 0x01020200, 0x01010100, 0x05000100, 11, 0x0aaa0555, 8 /* ratio 4/8 */ , 0x00aa0055}, { 330000000, 132000000, 33000000, 0x0903, 0x01000200, 0x00020200, 0x01010100, 0x05000100, 0, 0, 10 /* ratio 4/10 */ , 0x02520129}, { 330000000, 146666666, 33000000, 0x0903, 0x01010000, 0x00020200, 0x01010100, 0x05000100, 0, 0, 9 /* ratio 4/9 */ , 0x012a00a9}, { 330000000, 165000000, 33000000, 0x0903, 0x01000100, 0x00020200, 0x01010100, 0x05000100, 0, 0, 8 /* ratio 4/8 */ , 0x00aa0055}, { 330000000, 165000000, 41250000, 0x0903, 0x01000100, 0x00020100, 0x01010100, 0x05000100, 0, 0, 8 /* ratio 4/8 */ , 0x00aa0055}, { 330000000, 165000000, 55000000, 0x0903, 0x01000100, 0x00020000, 0x01010100, 0x05000100, 0, 0, 8 /* ratio 4/8 */ , 0x00aa0055}, { 360000000, 120000000, 32000000, 0x0a03, 0x01000300, 0x00010201, 0x01010200, 0x05000100, 0, 0, 12 /* ratio 4/12 */ , 0x04920492}, { 360000000, 144000000, 32000000, 0x0a03, 0x01000200, 0x00010201, 0x01010200, 0x05000100, 0, 0, 10 /* ratio 4/10 */ , 0x02520129}, { 360000000, 160000000, 32000000, 0x0a03, 0x01010000, 0x00010201, 0x01010200, 0x05000100, 0, 0, 9 /* ratio 4/9 */ , 0x012a00a9}, { 360000000, 180000000, 32000000, 0x0a03, 0x01000100, 0x00010201, 0x01010200, 0x05000100, 0, 0, 8 /* ratio 4/8 */ , 0x00aa0055}, { 360000000, 180000000, 40000000, 0x0a03, 0x01000100, 0x00010101, 0x01010200, 0x05000100, 0, 0, 8 /* ratio 4/8 */ , 0x00aa0055}, { 360000000, 180000000, 53333333, 0x0a03, 0x01000100, 0x00010001, 0x01010200, 0x05000100, 0, 0, 8 /* ratio 4/8 */ , 0x00aa0055}, { 390000000, 130000000, 32500000, 0x0b03, 0x01010100, 0x00020101, 0x01020100, 0x05000100, 0, 0, 12 /* ratio 4/12 */ , 0x04920492}, { 390000000, 156000000, 32500000, 0x0b03, 0x01000200, 0x00020101, 0x01020100, 0x05000100, 0, 0, 10 /* ratio 4/10 */ , 0x02520129}, { 390000000, 173000000, 32500000, 0x0b03, 0x01010000, 0x00020101, 0x01020100, 0x05000100, 0, 0, 9 /* ratio 4/9 */ , 0x012a00a9}, { 390000000, 195000000, 32500000, 0x0b03, 0x01000100, 0x00020101, 0x01020100, 0x05000100, 0, 0, 8 /* ratio 4/8 */ , 0x00aa0055}, }; static n4m_table_t BCMINITDATA(type4_table)[] = { { 120000000, 60000000, 0, 0x0009, 0x11020009, 0x01030203, 0x11020009, 0x04000009, 11, 0x0aaa0555}, { 150000000, 75000000, 0, 0x0009, 0x11050002, 0x01030203, 0x11050002, 0x04000005, 11, 0x0aaa0555}, { 192000000, 96000000, 0, 0x0702, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555}, { 198000000, 99000000, 0, 0x0603, 0x11020005, 0x11030011, 0x11020005, 0x04000005, 11, 0x0aaa0555}, { 200000000, 100000000, 0, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555}, { 204000000, 102000000, 0, 0x0c02, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555}, { 208000000, 104000000, 0, 0x0802, 0x11030002, 0x11090005, 0x11030002, 0x04000003, 11, 0x0aaa0555}, { 210000000, 105000000, 0, 0x0209, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555}, { 216000000, 108000000, 0, 0x0111, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555}, { 224000000, 112000000, 0, 0x0205, 0x11030002, 0x02002103, 0x11030002, 0x04000003, 11, 0x0aaa0555}, { 228000000, 101333333, 0, 0x0e02, 0x11030003, 0x11210005, 0x01030305, 0x04000005, 8, 0x012a00a9}, { 228000000, 114000000, 0, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555}, { 240000000, 102857143, 0, 0x0109, 0x04000021, 0x01050203, 0x11030021, 0x04000003, 13, 0x254a14a9}, { 240000000, 120000000, 0, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 11, 0x0aaa0555}, { 252000000, 100800000, 0, 0x0203, 0x04000009, 0x11050005, 0x02000209, 0x04000002, 9, 0x02520129}, { 252000000, 126000000, 0, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555}, { 264000000, 132000000, 0, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 11, 0x0aaa0555}, { 272000000, 116571428, 0, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 13, 0x254a14a9}, { 280000000, 120000000, 0, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9}, { 288000000, 123428571, 0, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 13, 0x254a14a9}, { 300000000, 120000000, 0, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 9, 0x02520129}, { 300000000, 150000000, 0, 0x0009, 0x04000005, 0x01030203, 0x04000005, 0x04000002, 11, 0x0aaa0555} }; static n4m_table_t BCMINITDATA(type7_table)[] = { { 183333333, 91666666, 0, 0x0605, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555}, { 187500000, 93750000, 0, 0x0a03, 0x04000011, 0x11030011, 0x04000011, 0x04000003, 11, 0x0aaa0555}, { 196875000, 98437500, 0, 0x1003, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555}, { 200000000, 100000000, 0, 0x0311, 0x04000011, 0x11030011, 0x04000009, 0x04000003, 11, 0x0aaa0555}, { 200000000, 100000000, 0, 0x0311, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 11, 0x0aaa0555}, { 206250000, 103125000, 0, 0x1103, 0x11020005, 0x11050011, 0x11020005, 0x04000005, 11, 0x0aaa0555}, { 212500000, 106250000, 0, 0x0c05, 0x11020005, 0x01030303, 0x11020005, 0x04000005, 11, 0x0aaa0555}, { 215625000, 107812500, 0, 0x1203, 0x11090009, 0x11050005, 0x11020005, 0x04000005, 11, 0x0aaa0555}, { 216666666, 108333333, 0, 0x0805, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555}, { 225000000, 112500000, 0, 0x0d03, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555}, { 233333333, 116666666, 0, 0x0905, 0x11020003, 0x11030011, 0x11020003, 0x04000003, 11, 0x0aaa0555}, { 237500000, 118750000, 0, 0x0e05, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 11, 0x0aaa0555}, { 240000000, 120000000, 0, 0x0b11, 0x11020009, 0x11210009, 0x11020009, 0x04000009, 11, 0x0aaa0555}, { 250000000, 125000000, 0, 0x0f03, 0x11020003, 0x11210003, 0x11020003, 0x04000003, 11, 0x0aaa0555} }; ulong start, end, dst; bool ret = FALSE; volatile uint32 *dll_ctrl = (volatile uint32 *)0xff400008; volatile uint32 *dll_r1 = (volatile uint32 *)0xff400010; volatile uint32 *dll_r2 = (volatile uint32 *)0xff400018; /* get index of the current core */ idx = sb_coreidx(sbh); clockcontrol_m2 = NULL; /* switch to chipc core */ /* switch to extif or chipc core */ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { pll_type = PLL_TYPE1; clockcontrol_n = &eir->clockcontrol_n; clockcontrol_sb = &eir->clockcontrol_sb; clockcontrol_pci = &eir->clockcontrol_pci; clockcontrol_m2 = &cc->clockcontrol_m2; } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { /* 5354 chipcommon pll setting can't be changed. * The PMU on power up comes up with the default clk frequency * of 240MHz */ if (sb_chip(sbh) == BCM5354_CHIP_ID) { ret = TRUE; goto done; } pll_type = R_REG(osh, &cc->capabilities) & CC_CAP_PLL_MASK; if (pll_type == PLL_TYPE6) { clockcontrol_n = NULL; clockcontrol_sb = NULL; clockcontrol_pci = NULL; } else { clockcontrol_n = &cc->clockcontrol_n; clockcontrol_sb = &cc->clockcontrol_sb; clockcontrol_pci = &cc->clockcontrol_pci; clockcontrol_m2 = &cc->clockcontrol_m2; } } else goto done; if (pll_type == PLL_TYPE6) { /* Silence compilers */ orig_n = orig_sb = orig_pci = 0; } else { /* Store the current clock register values */ orig_n = R_REG(osh, clockcontrol_n); orig_sb = R_REG(osh, clockcontrol_sb); orig_pci = R_REG(osh, clockcontrol_pci); } if (pll_type == PLL_TYPE1) { /* Keep the current PCI clock if not specified */ if (pciclock == 0) { pciclock = sb_clock_rate(pll_type, R_REG(osh, clockcontrol_n), R_REG(osh, clockcontrol_pci)); pciclock = (pciclock <= 25000000) ? 25000000 : 33000000; } /* Search for the closest MIPS clock less than or equal to a preferred value */ for (i = 0; i < ARRAYSIZE(type1_table); i++) { ASSERT(type1_table[i].mipsclock == sb_clock_rate(pll_type, type1_table[i].n, type1_table[i].sb)); if (type1_table[i].mipsclock > mipsclock) break; } if (i == 0) { ret = FALSE; goto done; } else { ret = TRUE; i--; } ASSERT(type1_table[i].mipsclock <= mipsclock); /* No PLL change */ if ((orig_n == type1_table[i].n) && (orig_sb == type1_table[i].sb) && (orig_pci == type1_table[i].pci33)) goto done; /* Set the PLL controls */ W_REG(osh, clockcontrol_n, type1_table[i].n); W_REG(osh, clockcontrol_sb, type1_table[i].sb); if (pciclock == 25000000) W_REG(osh, clockcontrol_pci, type1_table[i].pci25); else W_REG(osh, clockcontrol_pci, type1_table[i].pci33); /* Reset */ sb_watchdog(sbh, 1); while (1) ; } else if (pll_type == PLL_TYPE3) { /* 5350 */ if (sb_chip(sbh) != BCM5365_CHIP_ID) { /* * Search for the closest MIPS clock less than or equal to * a preferred value. */ for (i = 0; i < ARRAYSIZE(type3_table); i++) { if (type3_table[i].mipsclock > mipsclock) break; } if (i == 0) { ret = FALSE; goto done; } else { ret = TRUE; i--; } ASSERT(type3_table[i].mipsclock <= mipsclock); /* No PLL change */ orig_m2 = R_REG(osh, &cc->clockcontrol_m2); if ((orig_n == type3_table[i].n) && (orig_m2 == type3_table[i].m2)) { goto done; } /* Set the PLL controls */ W_REG(osh, clockcontrol_n, type3_table[i].n); W_REG(osh, clockcontrol_m2, type3_table[i].m2); /* Reset */ sb_watchdog(sbh, 1); while (1) ; } } else if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4) || (pll_type == PLL_TYPE6) || (pll_type == PLL_TYPE7)) { n4m_table_t *table = NULL, *te; uint tabsz = 0; ASSERT(cc); orig_mips = R_REG(osh, &cc->clockcontrol_m3); switch (pll_type) { case PLL_TYPE6: { uint32 new_mips = 0; ret = TRUE; if (mipsclock <= SB2MIPS_T6(CC_T6_M1)) new_mips = CC_T6_MMASK; if (orig_mips == new_mips) goto done; W_REG(osh, &cc->clockcontrol_m3, new_mips); goto end_fill; } case PLL_TYPE2: table = type2_table; tabsz = ARRAYSIZE(type2_table); break; case PLL_TYPE4: table = type4_table; tabsz = ARRAYSIZE(type4_table); break; case PLL_TYPE7: table = type7_table; tabsz = ARRAYSIZE(type7_table); break; default: ASSERT("No table for plltype" == NULL); break; } /* Store the current clock register values */ orig_m2 = R_REG(osh, &cc->clockcontrol_m2); orig_ratio_parm = 0; orig_ratio_cfg = 0; /* Look up current ratio */ for (i = 0; i < tabsz; i++) { if ((orig_n == table[i].n) && (orig_sb == table[i].sb) && (orig_pci == table[i].pci33) && (orig_m2 == table[i].m2) && (orig_mips == table[i].m3)) { orig_ratio_parm = table[i].ratio_parm; orig_ratio_cfg = table[i].ratio_cfg; break; } } /* Search for the closest MIPS clock greater or equal to a preferred value */ for (i = 0; i < tabsz; i++) { ASSERT(table[i].mipsclock == sb_clock_rate(pll_type, table[i].n, table[i].m3)); if ((mipsclock <= table[i].mipsclock) && ((sbclock == 0) || (sbclock <= table[i].sbclock)) && ((pciclock == 0) || (pciclock <= table[i].pciclock))) break; } if (i == tabsz) { ret = FALSE; goto done; } else { te = &table[i]; ret = TRUE; } /* No PLL change */ if ((orig_n == te->n) && (orig_sb == te->sb) && (orig_pci == te->pci33) && (orig_m2 == te->m2) && (orig_mips == te->m3)) goto done; /* Set the PLL controls */ W_REG(osh, clockcontrol_n, te->n); W_REG(osh, clockcontrol_sb, te->sb); W_REG(osh, clockcontrol_pci, te->pci33); W_REG(osh, &cc->clockcontrol_m2, te->m2); W_REG(osh, &cc->clockcontrol_m3, te->m3); /* Set the chipcontrol bit to change mipsref to the backplane divider if needed */ if ((pll_type == PLL_TYPE7) && (te->sb != te->m2) && (sb_clock_rate(pll_type, te->n, te->m2) == 120000000)) W_REG(osh, &cc->chipcontrol, R_REG(osh, &cc->chipcontrol) | 0x100); /* No ratio change */ if (sb_chip(sbh) != BCM4785_CHIP_ID) { if (orig_ratio_parm == te->ratio_parm) goto end_fill; } /* Preload the code into the cache */ icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize); if (sb_chip(sbh) == BCM4785_CHIP_ID) { start = ((ulong) && start_fill_4785) & ~(ic_lsize - 1); end = ((ulong) && end_fill_4785 + (ic_lsize - 1)) & ~(ic_lsize - 1); } else { start = ((ulong) && start_fill) & ~(ic_lsize - 1); end = ((ulong) && end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1); } while (start < end) { cache_op(start, Fill_I); start += ic_lsize; } /* 4785 clock freq change procedures */ if (sb_chip(sbh) == BCM4785_CHIP_ID) { start_fill_4785: /* Switch to async */ MTC0(C0_BROADCOM, 4, (1 << 22)); /* Set clock ratio in MIPS */ *dll_r1 = (*dll_r1 & 0xfffffff0) | (te->d11_r1 - 1); *dll_r2 = te->d11_r2; /* Enable new settings in MIPS */ *dll_r1 = *dll_r1 | 0xc0000000; /* Set active cfg */ MTC0(C0_BROADCOM, 2, MFC0(C0_BROADCOM, 2) | (1 << 3) | 1); /* Fake soft reset (clock cfg registers not reset) */ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | (1 << 2)); /* Clear active cfg */ MTC0(C0_BROADCOM, 2, MFC0(C0_BROADCOM, 2) & ~(1 << 3)); /* set watchdog timer */ W_REG(osh, &cc->watchdog, 20); (void)R_REG(osh, &cc->chipid); /* wait for timer interrupt */ __asm__ __volatile__(".set\tmips3\n\t" "sync\n\t" "wait\n\t" ".set\tmips0"); end_fill_4785: while (1) ; } /* Generic clock freq change procedures */ else { /* Copy the handler */ start = (ulong) & handler; end = (ulong) & afterhandler; dst = KSEG1ADDR(0x180); for (i = 0; i < (end - start); i += 4) *((ulong *) (dst + i)) = *((ulong *) (start + i)); /* Preload the handler into the cache one line at a time */ for (i = 0; i < (end - start); i += ic_lsize) cache_op(dst + i, Fill_I); /* Clear BEV bit */ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV); /* Enable interrupts */ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE)); /* Enable MIPS timer interrupt */ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) && !(mipsr = sb_setcore(sbh, SB_MIPS33, 0))) ASSERT(mipsr); W_REG(osh, &mipsr->intmask, 1); start_fill: /* step 1, set clock ratios */ MTC0(C0_BROADCOM, 3, te->ratio_parm); MTC0(C0_BROADCOM, 1, te->ratio_cfg); /* step 2: program timer intr */ W_REG(osh, &mipsr->timer, 100); (void)R_REG(osh, &mipsr->timer); /* step 3, switch to async */ sync_mode = MFC0(C0_BROADCOM, 4); MTC0(C0_BROADCOM, 4, 1 << 22); /* step 4, set cfg active */ MTC0(C0_BROADCOM, 2, (1 << 3) | 1); /* steps 5 & 6 */ __asm__ __volatile__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0"); /* step 7, clear cfg active */ MTC0(C0_BROADCOM, 2, 0); /* Additional Step: set back to orig sync mode */ MTC0(C0_BROADCOM, 4, sync_mode); /* step 8, fake soft reset */ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | (1 << 2)); end_fill: /* set watchdog timer */ W_REG(osh, &cc->watchdog, 20); (void)R_REG(osh, &cc->chipid); /* wait for timer interrupt */ __asm__ __volatile__(".set\tmips3\n\t" "sync\n\t" "wait\n\t" ".set\tmips0"); while (1) ; } } done: /* Enable 4785 DLL */ if (sb_chip(sbh) == BCM4785_CHIP_ID) { uint32 tmp; /* set mask to 1e, enable DLL (bit 0) */ *dll_ctrl |= 0x0041e021; /* enable aggressive hardware mode */ *dll_ctrl |= 0x00000080; /* wait for lock flag to clear */ while ((*dll_ctrl & 0x2) == 0) ; /* clear sticky flags (clear on write 1) */ tmp = *dll_ctrl; *dll_ctrl = tmp; /* set mask to 5b'10001 */ *dll_ctrl = (*dll_ctrl & 0xfffc1fff) | 0x00022000; /* enable sync mode */ MTC0(C0_BROADCOM, 4, MFC0(C0_BROADCOM, 4) & 0xfe3fffff); (void)MFC0(C0_BROADCOM, 4); } /* switch back to previous core */ sb_setcoreidx(sbh, idx); return ret; } void BCMINITFN(enable_pfc) (uint32 mode) { ulong start, end; uint ic_size, ic_lsize; /* If auto then choose the correct mode for this * platform, currently we only ever select one mode */ if (mode == PFC_AUTO) mode = PFC_INST; icache_probe(MFC0(C0_CONFIG, 1), &ic_size, &ic_lsize); /* enable prefetch cache if available */ if (MFC0(C0_BROADCOM, 0) & BRCM_PFC_AVAIL) { start = ((ulong) && setpfc_start) & ~(ic_lsize - 1); end = ((ulong) && setpfc_end + (ic_lsize - 1)) & ~(ic_lsize - 1); /* Preload setpfc code into the cache one line at a time */ while (start < end) { cache_op(start, Fill_I); start += ic_lsize; } /* Now set the pfc */ setpfc_start: /* write range */ *(volatile uint32 *)PFC_CR1 = 0xffff0000; /* enable */ *(volatile uint32 *)PFC_CR0 = mode; setpfc_end: /* Compiler foder */ ic_size = 0; } } /* returns the ncdl value to be programmed into sdram_ncdl for calibration */ uint32 BCMINITFN(sb_memc_get_ncdl) (sb_t * sbh) { osl_t *osh; sbmemcregs_t *memc; uint32 ret = 0; uint32 config, rd, wr, misc, dqsg, cd, sm, sd; uint idx, rev; osh = sb_osh(sbh); idx = sb_coreidx(sbh); memc = (sbmemcregs_t *) sb_setcore(sbh, SB_MEMC, 0); if (memc == 0) goto out; rev = sb_corerev(sbh); config = R_REG(osh, &memc->config); wr = R_REG(osh, &memc->wrncdlcor); rd = R_REG(osh, &memc->rdncdlcor); misc = R_REG(osh, &memc->miscdlyctl); dqsg = R_REG(osh, &memc->dqsgatencdl); rd &= MEMC_RDNCDLCOR_RD_MASK; wr &= MEMC_WRNCDLCOR_WR_MASK; dqsg &= MEMC_DQSGATENCDL_G_MASK; if (config & MEMC_CONFIG_DDR) { ret = (wr << 16) | (rd << 8) | dqsg; } else { if (rev > 0) cd = rd; else cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD); sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT; sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT; ret = (sm << 16) | (sd << 8) | cd; } out: /* switch back to previous core */ sb_setcoreidx(sbh, idx); return ret; } void hnd_cpu_reset(sb_t * sbh) { if (sb_chip(sbh) == BCM4785_CHIP_ID) MTC0(C0_BROADCOM, 4, (1 << 22)); sb_watchdog(sbh, 1); if (sb_chip(sbh) == BCM4785_CHIP_ID) { __asm__ __volatile__(".set\tmips3\n\t" "sync\n\t" "wait\n\t" ".set\tmips0"); } while (1) ; } #if defined(BCMPERFSTATS) /* * CP0 Register 25 supports 4 semi-independent 32bit performance counters. * $25 select 0, 1, 2, and 3 are the counters. The counters *decrement* (who thought this one up?) * $25 select 4 and 5 each contain 2-16bit control fields, one for each of the 4 counters * $25 select 6 is the global perf control register. */ /* enable and start instruction counting */ void hndmips_perf_cyclecount_enable(void) { MTC0(C0_PERFORMANCE, 6, 0x80000200); /* global enable perf counters */ MTC0(C0_PERFORMANCE, 4, 0x8048 | MFC0(C0_PERFORMANCE, 4)); /* enable cycles counting for counter 0 */ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter zero */ } void hndmips_perf_instrcount_enable(void) { MTC0(C0_PERFORMANCE, 6, 0x80000200); /* global enable perf counters */ MTC0(C0_PERFORMANCE, 4, 0x8044 | MFC0(C0_PERFORMANCE, 4)); /* enable instructions counting for counter 0 */ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter zero */ } /* enable and start I$ hit and I$ miss counting */ void hndmips_perf_icachecount_enable(void) { MTC0(C0_PERFORMANCE, 6, 0x80000218); /* enable I$ counting */ MTC0(C0_PERFORMANCE, 4, 0x80148018); /* count I$ hits in cntr 0 and misses in cntr 1 */ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter 0 - # I$ hits */ MTC0(C0_PERFORMANCE, 1, 0); /* zero counter 1 - # I$ misses */ } /* enable and start D$ hit and I$ miss counting */ void hndmips_perf_dcachecount_enable(void) { MTC0(C0_PERFORMANCE, 6, 0x80000211); /* enable D$ counting */ MTC0(C0_PERFORMANCE, 4, 0x80248028); /* count D$ hits in cntr 0 and misses in cntr 1 */ MTC0(C0_PERFORMANCE, 0, 0); /* zero counter 0 - # D$ hits */ MTC0(C0_PERFORMANCE, 1, 0); /* zero counter 1 - # D$ misses */ } void hndmips_perf_icache_miss_enable() { MTC0(C0_PERFORMANCE, 4, 0x80140000 | MFC0(C0_PERFORMANCE, 4)); /* enable cache misses counting for counter 1 */ MTC0(C0_PERFORMANCE, 1, 0); /* zero counter one */ } void hndmips_perf_icache_hit_enable() { MTC0(C0_PERFORMANCE, 5, 0x8018 | MFC0(C0_PERFORMANCE, 5)); /* enable cache hits counting for counter 2 */ MTC0(C0_PERFORMANCE, 2, 0); /* zero counter 2 */ } uint32 hndmips_perf_read_instrcount() { return -(long)(MFC0(C0_PERFORMANCE, 0)); } uint32 hndmips_perf_read_cache_miss() { return -(long)(MFC0(C0_PERFORMANCE, 1)); } uint32 hndmips_perf_read_cache_hit() { return -(long)(MFC0(C0_PERFORMANCE, 2)); } #endif