/* * OHCI HCD (Host Controller Driver) for USB. * * (C) Copyright 1999 Roman Weissgaerber * (C) Copyright 2000-2004 David Brownell * * [ Initialisation is based on Linus' ] * [ uhci code and gregs ahcd fragments ] * [ (C) Copyright 1999 Linus Torvalds ] * [ (C) Copyright 1999 Gregory P. Smith] * * * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller * interfaces (though some non-x86 Intel chips use it). It supports * smarter hardware than UHCI. A download link for the spec available * through the http://www.usb.org website. * * This file is licenced under the GPL. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../core/hcd.h" #include "../core/hub.h" #define DRIVER_VERSION "v0.01" #define DRIVER_AUTHOR "Gabor Juhos " #define DRIVER_DESC "ADMtek USB 1.1 Host Controller Driver" /*-------------------------------------------------------------------------*/ #define ADMHC_VERBOSE_DEBUG /* not always helpful */ #undef LATE_ED_SCHEDULE /* For initializing controller (mask in an HCFS mode too) */ #define OHCI_CONTROL_INIT OHCI_CTRL_CBSR #define ADMHC_INTR_INIT \ ( ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \ | ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI ) /*-------------------------------------------------------------------------*/ static const char hcd_name [] = "admhc-hcd"; #define STATECHANGE_DELAY msecs_to_jiffies(300) #include "adm5120.h" static void admhc_dump(struct admhcd *ahcd, int verbose); static int admhc_init(struct admhcd *ahcd); static void admhc_stop(struct usb_hcd *hcd); #include "adm5120-hub.c" #include "adm5120-dbg.c" #include "adm5120-mem.c" #include "adm5120-q.c" /*-------------------------------------------------------------------------*/ /* * queue up an urb for anything except the root hub */ static int admhc_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, gfp_t mem_flags) { struct admhcd *ahcd = hcd_to_admhcd(hcd); struct ed *ed; struct urb_priv *urb_priv; unsigned int pipe = urb->pipe; int i, td_cnt = 0; unsigned long flags; int retval = 0; #ifdef ADMHC_VERBOSE_DEBUG urb_print(urb, "ENQ", usb_pipein(pipe)); #endif /* every endpoint has an ed, locate and maybe (re)initialize it */ ed = ed_get(ahcd, ep, urb->dev, pipe, urb->interval); if (!ed) return -ENOMEM; /* for the private part of the URB we need the number of TDs */ switch (ed->type) { case PIPE_CONTROL: if (urb->transfer_buffer_length > TD_DATALEN_MAX) /* td_submit_urb() doesn't yet handle these */ return -EMSGSIZE; /* 1 TD for setup, 1 for ACK, plus ... */ td_cnt = 2; /* FALLTHROUGH */ case PIPE_BULK: /* one TD for every 4096 Bytes (can be upto 8K) */ td_cnt += urb->transfer_buffer_length / TD_DATALEN_MAX; /* ... and for any remaining bytes ... */ if ((urb->transfer_buffer_length % TD_DATALEN_MAX) != 0) td_cnt++; /* ... and maybe a zero length packet to wrap it up */ if (td_cnt == 0) td_cnt++; else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0 && (urb->transfer_buffer_length % usb_maxpacket(urb->dev, pipe, usb_pipeout (pipe))) == 0) td_cnt++; break; case PIPE_INTERRUPT: /* * for Interrupt IN/OUT transactions, each ED contains * only 1 TD. * TODO: check transfer_buffer_length? */ td_cnt = 1; break; case PIPE_ISOCHRONOUS: /* number of packets from URB */ td_cnt = urb->number_of_packets; break; default: /* paranoia */ admhc_err(ahcd, "bad EP type %d", ed->type); return -EINVAL; } urb_priv = urb_priv_alloc(ahcd, td_cnt, mem_flags); if (!urb_priv) return -ENOMEM; urb_priv->ed = ed; spin_lock_irqsave(&ahcd->lock, flags); /* don't submit to a dead HC */ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { retval = -ENODEV; goto fail; } if (!HC_IS_RUNNING(hcd->state)) { retval = -ENODEV; goto fail; } /* in case of unlink-during-submit */ spin_lock(&urb->lock); if (urb->status != -EINPROGRESS) { spin_unlock(&urb->lock); urb->hcpriv = urb_priv; finish_urb(ahcd, urb); retval = 0; goto fail; } /* schedule the ed if needed */ if (ed->state == ED_IDLE) { #ifndef LATE_ED_SCHEDULE retval = ed_schedule(ahcd, ed); if (retval < 0) goto fail0; #endif if (ed->type == PIPE_ISOCHRONOUS) { u16 frame = admhc_frame_no(ahcd); /* delay a few frames before the first TD */ frame += max_t (u16, 8, ed->interval); frame &= ~(ed->interval - 1); frame |= ed->branch; urb->start_frame = frame; /* yes, only URB_ISO_ASAP is supported, and * urb->start_frame is never used as input. */ } } else if (ed->type == PIPE_ISOCHRONOUS) urb->start_frame = ed->last_iso + ed->interval; /* fill the TDs and link them to the ed; and * enable that part of the schedule, if needed * and update count of queued periodic urbs */ urb->hcpriv = urb_priv; td_submit_urb(ahcd, urb); #ifdef LATE_ED_SCHEDULE if (ed->state == ED_IDLE) retval = ed_schedule(ahcd, ed); #endif admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1); fail0: spin_unlock(&urb->lock); fail: if (retval) urb_priv_free(ahcd, urb_priv); spin_unlock_irqrestore(&ahcd->lock, flags); return retval; } /* * decouple the URB from the HC queues (TDs, urb_priv); it's * already marked using urb->status. reporting is always done * asynchronously, and we might be dealing with an urb that's * partially transferred, or an ED with other urbs being unlinked. */ static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) { struct admhcd *ahcd = hcd_to_admhcd(hcd); unsigned long flags; #ifdef ADMHC_VERBOSE_DEBUG urb_print(urb, "DEQ", 1); #endif spin_lock_irqsave(&ahcd->lock, flags); if (HC_IS_RUNNING(hcd->state)) { struct urb_priv *urb_priv; /* Unless an IRQ completed the unlink while it was being * handed to us, flag it for unlink and giveback, and force * some upcoming INTR_SF to call finish_unlinks() */ urb_priv = urb->hcpriv; if (urb_priv) { if (urb_priv->ed->state == ED_OPER) start_ed_unlink(ahcd, urb_priv->ed); } } else { /* * with HC dead, we won't respect hc queue pointers * any more ... just clean up every urb's memory. */ if (urb->hcpriv) finish_urb(ahcd, urb); } spin_unlock_irqrestore(&ahcd->lock, flags); return 0; } /*-------------------------------------------------------------------------*/ /* frees config/altsetting state for endpoints, * including ED memory, dummy TD, and bulk/intr data toggle */ static void admhc_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) { struct admhcd *ahcd = hcd_to_admhcd(hcd); unsigned long flags; struct ed *ed = ep->hcpriv; unsigned limit = 1000; /* ASSERT: any requests/urbs are being unlinked */ /* ASSERT: nobody can be submitting urbs for this any more */ if (!ed) return; #ifdef ADMHC_VERBOSE_DEBUG spin_lock_irqsave(&ahcd->lock, flags); admhc_dump_ed(ahcd, "ep_disable", ed, 1); spin_unlock_irqrestore(&ahcd->lock, flags); #endif rescan: spin_lock_irqsave(&ahcd->lock, flags); if (!HC_IS_RUNNING(hcd->state)) { sanitize: ed->state = ED_IDLE; finish_unlinks(ahcd, 0); } switch (ed->state) { case ED_UNLINK: /* wait for hw to finish? */ /* major IRQ delivery trouble loses INTR_SOFI too... */ if (limit-- == 0) { admhc_warn(ahcd, "IRQ INTR_SOFI lossage\n"); goto sanitize; } spin_unlock_irqrestore(&ahcd->lock, flags); schedule_timeout_uninterruptible(1); goto rescan; case ED_IDLE: /* fully unlinked */ if (list_empty(&ed->td_list)) { td_free (ahcd, ed->dummy); ed_free (ahcd, ed); break; } /* else FALL THROUGH */ default: /* caller was supposed to have unlinked any requests; * that's not our job. can't recover; must leak ed. */ admhc_err(ahcd, "leak ed %p (#%02x) state %d%s\n", ed, ep->desc.bEndpointAddress, ed->state, list_empty(&ed->td_list) ? "" : " (has tds)"); td_free(ahcd, ed->dummy); break; } ep->hcpriv = NULL; spin_unlock_irqrestore(&ahcd->lock, flags); return; } static int admhc_get_frame(struct usb_hcd *hcd) { struct admhcd *ahcd = hcd_to_admhcd(hcd); return admhc_frame_no(ahcd); } static void admhc_usb_reset(struct admhcd *ahcd) { #if 0 ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control); ahcd->hc_control &= OHCI_CTRL_RWC; admhc_writel(ahcd, ahcd->hc_control, &ahcd->regs->control); #else /* FIXME */ ahcd->host_control = ADMHC_BUSS_RESET; admhc_writel(ahcd, ahcd->host_control ,&ahcd->regs->host_control); #endif } /* admhc_shutdown forcibly disables IRQs and DMA, helping kexec and * other cases where the next software may expect clean state from the * "firmware". this is bus-neutral, unlike shutdown() methods. */ static void admhc_shutdown(struct usb_hcd *hcd) { struct admhcd *ahcd; ahcd = hcd_to_admhcd(hcd); admhc_intr_disable(ahcd, ADMHC_INTR_MIE); admhc_dma_disable(ahcd); admhc_usb_reset(ahcd); /* flush the writes */ admhc_writel_flush(ahcd); } /*-------------------------------------------------------------------------* * HC functions *-------------------------------------------------------------------------*/ static void admhc_eds_cleanup(struct admhcd *ahcd) { if (ahcd->ed_tails[PIPE_INTERRUPT]) { ed_free(ahcd, ahcd->ed_tails[PIPE_INTERRUPT]); ahcd->ed_tails[PIPE_INTERRUPT] = NULL; } if (ahcd->ed_tails[PIPE_ISOCHRONOUS]) { ed_free(ahcd, ahcd->ed_tails[PIPE_ISOCHRONOUS]); ahcd->ed_tails[PIPE_ISOCHRONOUS] = NULL; } if (ahcd->ed_tails[PIPE_CONTROL]) { ed_free(ahcd, ahcd->ed_tails[PIPE_CONTROL]); ahcd->ed_tails[PIPE_CONTROL] = NULL; } if (ahcd->ed_tails[PIPE_BULK]) { ed_free(ahcd, ahcd->ed_tails[PIPE_BULK]); ahcd->ed_tails[PIPE_BULK] = NULL; } ahcd->ed_head = NULL; } #define ED_DUMMY_INFO (ED_SPEED_FULL | ED_SKIP) static int admhc_eds_init(struct admhcd *ahcd) { struct ed *ed; ed = ed_create(ahcd, PIPE_INTERRUPT, ED_DUMMY_INFO); if (!ed) goto err; ahcd->ed_tails[PIPE_INTERRUPT] = ed; ed = ed_create(ahcd, PIPE_ISOCHRONOUS, ED_DUMMY_INFO); if (!ed) goto err; ahcd->ed_tails[PIPE_ISOCHRONOUS] = ed; ed->ed_prev = ahcd->ed_tails[PIPE_INTERRUPT]; ahcd->ed_tails[PIPE_INTERRUPT]->ed_next = ed; ahcd->ed_tails[PIPE_INTERRUPT]->hwNextED = cpu_to_hc32(ahcd, ed->dma); ed = ed_create(ahcd, PIPE_CONTROL, ED_DUMMY_INFO); if (!ed) goto err; ahcd->ed_tails[PIPE_CONTROL] = ed; ed->ed_prev = ahcd->ed_tails[PIPE_ISOCHRONOUS]; ahcd->ed_tails[PIPE_ISOCHRONOUS]->ed_next = ed; ahcd->ed_tails[PIPE_ISOCHRONOUS]->hwNextED = cpu_to_hc32(ahcd, ed->dma); ed = ed_create(ahcd, PIPE_BULK, ED_DUMMY_INFO); if (!ed) goto err; ahcd->ed_tails[PIPE_BULK] = ed; ed->ed_prev = ahcd->ed_tails[PIPE_CONTROL]; ahcd->ed_tails[PIPE_CONTROL]->ed_next = ed; ahcd->ed_tails[PIPE_CONTROL]->hwNextED = cpu_to_hc32(ahcd, ed->dma); ahcd->ed_head = ahcd->ed_tails[PIPE_INTERRUPT]; #ifdef ADMHC_VERBOSE_DEBUG admhc_dump_ed(ahcd, "ed intr", ahcd->ed_tails[PIPE_INTERRUPT], 1); admhc_dump_ed(ahcd, "ed isoc", ahcd->ed_tails[PIPE_ISOCHRONOUS], 1); admhc_dump_ed(ahcd, "ed ctrl", ahcd->ed_tails[PIPE_CONTROL], 1); admhc_dump_ed(ahcd, "ed bulk", ahcd->ed_tails[PIPE_BULK], 1); #endif return 0; err: admhc_eds_cleanup(ahcd); return -ENOMEM; } /* init memory, and kick BIOS/SMM off */ static int admhc_init(struct admhcd *ahcd) { struct usb_hcd *hcd = admhcd_to_hcd(ahcd); int ret; admhc_disable(ahcd); ahcd->regs = hcd->regs; /* Disable HC interrupts */ admhc_intr_disable(ahcd, ADMHC_INTR_MIE); /* Read the number of ports unless overridden */ if (ahcd->num_ports == 0) ahcd->num_ports = admhc_get_rhdesc(ahcd) & ADMHC_RH_NUMP; ret = admhc_mem_init(ahcd); if (ret) goto err; /* init dummy endpoints */ ret = admhc_eds_init(ahcd); if (ret) goto err; create_debug_files(ahcd); return 0; err: admhc_stop(hcd); return ret; } /*-------------------------------------------------------------------------*/ /* Start an OHCI controller, set the BUS operational * resets USB and controller * enable interrupts */ static int admhc_run(struct admhcd *ahcd) { u32 temp; int first = ahcd->fminterval == 0; struct usb_hcd *hcd = admhcd_to_hcd(ahcd); admhc_disable(ahcd); /* boot firmware should have set this up (5.1.1.3.1) */ if (first) { temp = admhc_readl(ahcd, &ahcd->regs->fminterval); ahcd->fminterval = temp & ADMHC_SFI_FI_MASK; if (ahcd->fminterval != FI) admhc_dbg(ahcd, "fminterval delta %d\n", ahcd->fminterval - FI); ahcd->fminterval |= (FSLDP (ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT); /* also: power/overcurrent flags in rhdesc */ } #if 0 /* TODO: not applicable */ /* Reset USB nearly "by the book". RemoteWakeupConnected was * saved if boot firmware (BIOS/SMM/...) told us it's connected, * or if bus glue did the same (e.g. for PCI add-in cards with * PCI PM support). */ if ((ahcd->hc_control & OHCI_CTRL_RWC) != 0 && !device_may_wakeup(hcd->self.controller)) device_init_wakeup(hcd->self.controller, 1); #endif switch (ahcd->host_control & ADMHC_HC_BUSS) { case ADMHC_BUSS_OPER: temp = 0; break; case ADMHC_BUSS_SUSPEND: /* FALLTHROUGH ? */ case ADMHC_BUSS_RESUME: ahcd->host_control = ADMHC_BUSS_RESUME; temp = 10 /* msec wait */; break; /* case ADMHC_BUSS_RESET: */ default: ahcd->host_control = ADMHC_BUSS_RESET; temp = 50 /* msec wait */; break; } admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control); /* flush the writes */ admhc_writel_flush(ahcd); msleep(temp); temp = admhc_get_rhdesc(ahcd); if (!(temp & ADMHC_RH_NPS)) { /* power down each port */ for (temp = 0; temp < ahcd->num_ports; temp++) admhc_writel(ahcd, ADMHC_PS_CPP, &ahcd->regs->portstatus[temp]); } /* flush those writes */ admhc_writel_flush(ahcd); /* 2msec timelimit here means no irqs/preempt */ spin_lock_irq(&ahcd->lock); retry: admhc_writel(ahcd, ADMHC_CTRL_SR, &ahcd->regs->gencontrol); temp = 30; /* ... allow extra time */ while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) { if (--temp == 0) { spin_unlock_irq(&ahcd->lock); admhc_err(ahcd, "USB HC reset timed out!\n"); return -1; } udelay (1); } /* enable HOST mode, before access any host specific register */ admhc_writel(ahcd, ADMHC_CTRL_UHFE, &ahcd->regs->gencontrol); /* Tell the controller where the descriptor list is */ admhc_writel(ahcd, (u32)ahcd->ed_head->dma, &ahcd->regs->hosthead); periodic_reinit(ahcd); /* use rhsc irqs after khubd is fully initialized */ hcd->poll_rh = 1; hcd->uses_new_polling = 1; #if 0 /* wake on ConnectStatusChange, matching external hubs */ admhc_writel(ahcd, RH_HS_DRWE, &ahcd->regs->roothub.status); #else /* FIXME roothub_write_status (ahcd, ADMHC_RH_DRWE); */ #endif /* Choose the interrupts we care about now, others later on demand */ admhc_intr_ack(ahcd, ~0); admhc_intr_enable(ahcd, ADMHC_INTR_INIT); admhc_writel(ahcd, ADMHC_RH_NPS | ADMHC_RH_LPSC, &ahcd->regs->rhdesc); /* flush those writes */ admhc_writel_flush(ahcd); /* start controller operations */ ahcd->host_control = ADMHC_BUSS_OPER; admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control); temp = 20; while ((admhc_readl(ahcd, &ahcd->regs->host_control) & ADMHC_HC_BUSS) != ADMHC_BUSS_OPER) { if (--temp == 0) { spin_unlock_irq(&ahcd->lock); admhc_err(ahcd, "unable to setup operational mode!\n"); return -1; } mdelay(1); } hcd->state = HC_STATE_RUNNING; ahcd->next_statechange = jiffies + STATECHANGE_DELAY; #if 0 /* FIXME: enabling DMA is always failed here for an unknown reason */ admhc_dma_enable(ahcd); temp = 200; while ((admhc_readl(ahcd, &ahcd->regs->host_control) & ADMHC_HC_DMAE) != ADMHC_HC_DMAE) { if (--temp == 0) { spin_unlock_irq(&ahcd->lock); admhc_err(ahcd, "unable to enable DMA!\n"); admhc_dump(ahcd, 1); return -1; } mdelay(1); } #endif spin_unlock_irq(&ahcd->lock); mdelay(ADMHC_POTPGT); return 0; } /*-------------------------------------------------------------------------*/ /* an interrupt happens */ static irqreturn_t admhc_irq(struct usb_hcd *hcd) { struct admhcd *ahcd = hcd_to_admhcd(hcd); struct admhcd_regs __iomem *regs = ahcd->regs; u32 ints; ints = admhc_readl(ahcd, ®s->int_status); if ((ints & ADMHC_INTR_INTA) == 0) { /* no unmasked interrupt status is set */ return IRQ_NONE; } ints &= admhc_readl(ahcd, ®s->int_enable); if (ints & ADMHC_INTR_FATI) { /* e.g. due to PCI Master/Target Abort */ admhc_disable(ahcd); admhc_err(ahcd, "Fatal Error, controller disabled\n"); admhc_dump(ahcd, 1); admhc_usb_reset(ahcd); } if (ints & ADMHC_INTR_INSM) { admhc_vdbg(ahcd, "Root Hub Status Change\n"); ahcd->next_statechange = jiffies + STATECHANGE_DELAY; admhc_intr_ack(ahcd, ADMHC_INTR_RESI | ADMHC_INTR_INSM); /* NOTE: Vendors didn't always make the same implementation * choices for RHSC. Many followed the spec; RHSC triggers * on an edge, like setting and maybe clearing a port status * change bit. With others it's level-triggered, active * until khubd clears all the port status change bits. We'll * always disable it here and rely on polling until khubd * re-enables it. */ admhc_intr_disable(ahcd, ADMHC_INTR_INSM); usb_hcd_poll_rh_status(hcd); } else if (ints & ADMHC_INTR_RESI) { /* For connect and disconnect events, we expect the controller * to turn on RHSC along with RD. But for remote wakeup events * this might not happen. */ admhc_vdbg(ahcd, "Resume Detect\n"); admhc_intr_ack(ahcd, ADMHC_INTR_RESI); hcd->poll_rh = 1; if (ahcd->autostop) { spin_lock(&ahcd->lock); admhc_rh_resume(ahcd); spin_unlock(&ahcd->lock); } else usb_hcd_resume_root_hub(hcd); } if (ints & ADMHC_INTR_TDC) { admhc_vdbg(ahcd, "Transfer Descriptor Complete\n"); admhc_intr_ack(ahcd, ADMHC_INTR_TDC); if (HC_IS_RUNNING(hcd->state)) admhc_intr_disable(ahcd, ADMHC_INTR_TDC); spin_lock(&ahcd->lock); admhc_td_complete(ahcd); spin_unlock(&ahcd->lock); if (HC_IS_RUNNING(hcd->state)) admhc_intr_enable(ahcd, ADMHC_INTR_TDC); } if (ints & ADMHC_INTR_SO) { /* could track INTR_SO to reduce available PCI/... bandwidth */ admhc_vdbg(ahcd, "Schedule Overrun\n"); } if (ints & ADMHC_INTR_BABI) { admhc_intr_disable(ahcd, ADMHC_INTR_BABI); admhc_intr_ack(ahcd, ADMHC_INTR_BABI); admhc_err(ahcd, "Babble Detected\n"); } #if 1 spin_lock(&ahcd->lock); if (ahcd->ed_rm_list) finish_unlinks(ahcd, admhc_frame_no(ahcd)); if ((ints & ADMHC_INTR_SOFI) != 0 && !ahcd->ed_rm_list && HC_IS_RUNNING(hcd->state)) admhc_intr_disable(ahcd, ADMHC_INTR_SOFI); spin_unlock(&ahcd->lock); #else if (ints & ADMHC_INTR_SOFI) { admhc_vdbg(ahcd, "Start Of Frame\n"); spin_lock(&ahcd->lock); /* handle any pending ED removes */ finish_unlinks(ahcd, admhc_frameno(ahcd)); /* leaving INTR_SOFI enabled when there's still unlinking * to be done in the (next frame). */ if ((ahcd->ed_rm_list == NULL) || HC_IS_RUNNING(hcd->state) == 0) /* * disable INTR_SOFI if there are no unlinking to be * done (in the next frame) */ admhc_intr_disable(ahcd, ADMHC_INTR_SOFI); spin_unlock(&ahcd->lock); } #endif if (HC_IS_RUNNING(hcd->state)) { admhc_intr_ack(ahcd, ints); admhc_intr_enable(ahcd, ADMHC_INTR_MIE); admhc_writel_flush(ahcd); } return IRQ_HANDLED; } /*-------------------------------------------------------------------------*/ static void admhc_stop(struct usb_hcd *hcd) { struct admhcd *ahcd = hcd_to_admhcd(hcd); admhc_dump(ahcd, 1); flush_scheduled_work(); admhc_usb_reset(ahcd); admhc_intr_disable(ahcd, ADMHC_INTR_MIE); free_irq(hcd->irq, hcd); hcd->irq = -1; remove_debug_files(ahcd); admhc_eds_cleanup(ahcd); admhc_mem_cleanup(ahcd); } /*-------------------------------------------------------------------------*/ /* must not be called from interrupt context */ #ifdef CONFIG_PM static int admhc_restart(struct admhcd *ahcd) { int temp; int i; struct urb_priv *priv; /* mark any devices gone, so they do nothing till khubd disconnects. * recycle any "live" eds/tds (and urbs) right away. * later, khubd disconnect processing will recycle the other state, * (either as disconnect/reconnect, or maybe someday as a reset). */ spin_lock_irq(&ahcd->lock); admhc_disable(ahcd); usb_root_hub_lost_power(admhcd_to_hcd(ahcd)->self.root_hub); if (!list_empty(&ahcd->pending)) admhc_dbg(ahcd, "abort schedule...\n"); list_for_each_entry (priv, &ahcd->pending, pending) { struct urb *urb = priv->td[0]->urb; struct ed *ed = priv->ed; switch (ed->state) { case ED_OPER: ed->state = ED_UNLINK; ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE); ed_deschedule (ahcd, ed); ed->ed_next = ahcd->ed_rm_list; ed->ed_prev = NULL; ahcd->ed_rm_list = ed; /* FALLTHROUGH */ case ED_UNLINK: break; default: admhc_dbg(ahcd, "bogus ed %p state %d\n", ed, ed->state); } spin_lock(&urb->lock); urb->status = -ESHUTDOWN; spin_unlock(&urb->lock); } finish_unlinks (ahcd, 0); spin_unlock_irq(&ahcd->lock); /* paranoia, in case that didn't work: */ /* empty the interrupt branches */ for (i = 0; i < NUM_INTS; i++) ahcd->load[i] = 0; for (i = 0; i < NUM_INTS; i++) ahcd->hcca->int_table[i] = 0; /* no EDs to remove */ ahcd->ed_rm_list = NULL; /* empty control and bulk lists */ ahcd->ed_controltail = NULL; ahcd->ed_bulktail = NULL; if ((temp = admhc_run(ahcd)) < 0) { admhc_err(ahcd, "can't restart, %d\n", temp); return temp; } else { /* here we "know" root ports should always stay powered, * and that if we try to turn them back on the root hub * will respond to CSC processing. */ i = ahcd->num_ports; while (i--) admhc_writel(ahcd, RH_PS_PSS, &ahcd->regs->portstatus[i]); admhc_dbg(ahcd, "restart complete\n"); } return 0; } #endif /*-------------------------------------------------------------------------*/ #ifdef CONFIG_MIPS_ADM5120 #include "adm5120-drv.c" #define PLATFORM_DRIVER usb_hcd_adm5120_driver #endif #if !defined(PLATFORM_DRIVER) #error "missing bus glue for admhc-hcd" #endif #define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION static int __init admhc_hcd_mod_init(void) { int retval = 0; if (usb_disabled()) return -ENODEV; pr_info("%s: " DRIVER_INFO "\n", hcd_name); pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name, sizeof (struct ed), sizeof (struct td)); #ifdef PLATFORM_DRIVER retval = platform_driver_register(&PLATFORM_DRIVER); if (retval < 0) goto error_platform; #endif return retval; #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); error_platform: #endif return retval; } module_init(admhc_hcd_mod_init); static void __exit admhc_hcd_mod_exit(void) { platform_driver_unregister(&PLATFORM_DRIVER); } module_exit(admhc_hcd_mod_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_INFO); MODULE_LICENSE("GPL");