/* * (C) Copyright 2006 * Ingenic Semiconductor, * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * This file contains the configuration parameters for the pavo board. */ #ifndef __CONFIG_H #define __CONFIG_H //#define DEBUG //#define DEBUG_SHELL #define CONFIG_MIPS32 1 /* MIPS32 CPU core */ #define CONFIG_JzRISC 1 /* JzRISC core */ #define CONFIG_JZSOC 1 /* Jz SoC */ #define CONFIG_JZ4740 1 /* Jz4740 SoC */ #define CONFIG_PAVO 1 /* PAVO validation board */ #define CONFIG_BOARD_NAME "n516" #define CONFIG_BOARD_HWREV "1.0" #define CONFIG_FIRMWARE_EPOCH "0" #define CONFIG_UPDATE_TMPBUF 0x80600000 #define CONFIG_UPDATE_CHUNKSIZE 0x800000 #define CONFIG_UPDATE_FILENAME "update.oifw" #define CONFIG_UPDATE_FILEEXT ".oifw" #define CONFIG_UBI_PARTITION "UBI" #define CONFIG_SKIP_LOWLEVEL_INIT 1 #undef CONFIG_SKIP_RELOCATE_UBOOT #if 0 #define CONFIG_LCD /* LCD support */ #define CONFIG_JZLCD_METRONOME_800x600 #define LCD_BPP LCD_COLOR8 #define WFM_DATA_SIZE ( 1 << 14 ) #define CONFIG_METRONOME_WF_LEN (64 * (1 << 10)) #define CONFIG_METRONOME_WF_NAND_OFFSET (0x100000) #define BMP_LOGO_HEIGHT 0 #define CONFIG_UBI_WF_VOLUME "waveforms" #define CONFIG_UBI_BOOTSPLASH_VOLUME "bootsplash" #define CONFIG_METRONOME_BOOTSPLASH_LEN 480000 #endif #if 0 #define CONFIG_JZSOC_I2C #define CONFIG_HARD_I2C #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 0 #define CONFIG_LPC_I2C_ADDR 0x54 #endif #define JZ4740_NORBOOT_CFG JZ4740_NORBOOT_16BIT /* NOR Boot config code */ #define JZ4740_NANDBOOT_CFG JZ4740_NANDBOOT_B8R3 /* NAND Boot config code */ #define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */ #define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */ #define CONFIG_SYS_HZ (CONFIG_SYS_EXTAL/256) /* incrementer freq */ #define CONFIG_SYS_UART_BASE UART0_BASE /* Base of the UART channel */ #define CONFIG_BAUDRATE 57600 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_MMC 1 #define CONFIG_GENERIC_MMC 1 #define CONFIG_JZ_MMC 1 #define CONFIG_FAT 1 #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 ">" #define CONFIG_CMDLINE_EDITING /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #include #undef CONFIG_CMD_BDI /* bdinfo */ #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_ECHO /* echo arguments */ #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ #undef CONFIG_CMD_IMI /* iminfo */ #undef CONFIG_CMD_ITEST /* Integer (and string) test */ #undef CONFIG_CMD_LOADB /* loadb */ #undef CONFIG_CMD_LOADS /* loads */ #undef CONFIG_CMD_NFS /* NFS support */ #undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ #undef CONFIG_CMD_SOURCE /* "source" command support */ #undef CONFIG_CMD_XIMG /* Load part of Multi Image */ #undef CONFIG_CMD_NET //#define CONFIG_CMD_ASKENV //#define CONFIG_CMD_DHCP //#define CONFIG_CMD_PING #define CONFIG_CMD_NAND #define CONFIG_CMD_MMC #define CONFIG_CMD_FAT /*#define CONFIG_CMD_UBI*/ /*#define CONFIG_CMD_MTDPARTS*/ //#define CONFIG_CMD_JFFS2 //#define CONFIG_JFFS2_NAND //#define CONFIG_JFFS2_CMDLINE #define CONFIG_CMD_UPDATE #define CONFIG_DOS_PARTITION /*#define CONFIG_MTD_PARTITIONS*/ #define CONFIG_RBTREE #define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAUL ) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #if 0 #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_BOOTDELAY 0 #define CONFIG_BOOTFILE uImage /* file to load */ #define CONFIG_BOOTARGS "mem=64M console=ttyS0,57600n8 ip=off rootfstype=ubifs root=ubi:rootfs ubi.mtd=UBI rw panic=5 " MTDPARTS_DEFAULT #define CONFIG_BOOTCOMMAND "check_and_update; setenv bootargs $bootargs $batt_level_param; ubi read 0x80600000 bootsplash && show_image 0x80600000; ubi read 0x80600000 kernel; bootm 0x80600000; ubi read 0x80600000 errorsplash && show_image 0x80600000; while test 0 = 0; do check_and_update; done" #define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ #define CONFIG_IPADDR 192.168.111.1 #define CONFIG_SERVERIP 192.168.111.2 #define MTDIDS_DEFAULT "nand0=jz4740-nand" #define MTDPARTS_DEFAULT "mtdparts=jz4740-nand:1M@0(uboot)ro,-@1M(UBI)" #define CONFIG_EXTRA_ENV_SETTINGS "mtdids=nand0=jz4740-nand\0mtdparts=mtdparts=jz4740-nand:1M@0(uboot)ro,-@1M(UBI)\0" \ "stdout=serial\0stderr=lcd\0" #endif #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL) #define CONFIG_BOOTDELAY 0 #define CONFIG_BOOTFILE "uImage" /* file to load */ #define CONFIG_BOOTARGS "mem=64M console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait" #define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm" #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* * Serial download configuration * */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "n516 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ #define CONFIG_SYS_MALLOC_LEN 1024*1024*2 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 #define CONFIG_SYS_LOAD_ADDR 0x80600000 /* default load address */ #define CONFIG_SYS_MEMTEST_START 0x80100000 #define CONFIG_SYS_MEMTEST_END 0x80800000 /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #else #define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ #endif /*----------------------------------------------------------------------- * NAND FLASH configuration */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 #define CONFIG_SYS_NAND_BASE 0xB8000000 #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ /* * IPL (Initial Program Loader, integrated inside CPU) * Will load first 8k from NAND (SPL) into cache and execute it from there. * * SPL (Secondary Program Loader) * Will load special U-Boot version (NUB) from NAND and execute it. This SPL * has to fit into 8kByte. It sets up the CPU and configures the SDRAM * controller and the NAND controller so that the special U-Boot image can be * loaded from NAND to SDRAM. * * NUB (NAND U-Boot) * This NAND U-Boot (NUB) is a special U-Boot version which can be started * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. * */ #define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr */ /* * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) */ #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */ #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */ #define CONFIG_SYS_NAND_PAGE_SIZE 2048 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) /* NAND chip block size */ #define CONFIG_SYS_NAND_BADBLOCK_PAGE 63 /* NAND bad block was marked at this page in a block, starting from 0 */ #define CONFIG_SYS_NAND_ECC_POS 6 #ifdef CONFIG_ENV_IS_IN_NAND //#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #define CONFIG_ENV_SIZE (128 * 1024) //#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE + CONFIG_SYS_NAND_BLOCK_SIZE) /* environment starts here */ #define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_SIZE + CONFIG_SYS_NAND_U_BOOT_OFFS) //#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) #endif /*----------------------------------------------------------------------- * NOR FLASH and environment organization */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ #define PHYS_FLASH_1 0xa8000000 /* Flash Bank #1 */ /* The following #defines are needed to get flash environment right */ #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* in pavo/config.mk TEXT_BASE=0x88000000*/ #define CONFIG_SYS_SYS_MONITOR_BASE TEXT_BASE /* in pavo/config.mk TEXT_BASE=0x88000000*/ #define CONFIG_SYS_MONITOR_LEN (256*1024) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* timeout values are in ticks */ #define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ #define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ #ifdef CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_IS_NOWHERE 1 #define CONFIG_ENV_ADDR 0xa8040000 #define CONFIG_ENV_SIZE 0x20000 #endif /*----------------------------------------------------------------------- * SDRAM Info. */ #define CONFIG_NR_DRAM_BANKS 1 // SDRAM paramters #define SDRAM_BW16 0 /* Data bus width: 0-32bit, 1-16bit */ #define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */ #define SDRAM_ROW 13 /* Row address: 11 to 13 */ #define SDRAM_COL 9 /* Column address: 8 to 12 */ #define SDRAM_CASL 2 /* CAS latency: 2 or 3 */ // SDRAM Timings, unit: ns #define SDRAM_TRAS 45 /* RAS# Active Time */ #define SDRAM_RCD 20 /* RAS# to CAS# Delay */ #define SDRAM_TPC 20 /* RAS# Precharge Time */ #define SDRAM_TRWL 7 /* Write Latency Time */ #define SDRAM_TREF 15625 /* Refresh period: 4096 refresh cycles/64ms */ /*----------------------------------------------------------------------- * Cache Configuration */ #define CONFIG_SYS_DCACHE_SIZE 16384 #define CONFIG_SYS_ICACHE_SIZE 16384 #define CONFIG_SYS_CACHELINE_SIZE 32 /*----------------------------------------------------------------------- * GPIO definition */ #define GPIO_SD_VCC_EN_N 113 /* GPD17 */ #define GPIO_SD_CD_N 103 /* GPD7 */ #define GPIO_SD_WP 111 /* GPD15 */ #define GPIO_USB_DETE 115 /* GPD6 */ //#define GPIO_DC_DETE_N 103 /* GPD7 */ #define GPIO_CHARG_STAT_N 112 /* GPD15 */ #define GPIO_DISP_OFF_N 97 /* GPD1 */ #define GPIO_UDC_HOTPLUG 100 /* GPD4 */ #define GPIO_LED_EN 124 /* GPD28 */ #define GPIO_RST_L 50 /* GPB18 LCD_SPL */ #define GPIO_LCDRDY 49 /* GPB17 LCD_CLS */ #define GPIO_STBY 86 /* GPC22 LCD_PS */ #define GPIO_ERR 87 /* GPC23 LCD_REV */ #endif /* __CONFIG_H */