diff -purbB --unidirectional-new-file -x '.*' -x '*.o' hostapd-rtk-0.6.10/hostapd/hostapd.wpa_psk_conf hostapd-0.6.10/hostapd/hostapd.wpa_psk_conf
--- hostapd-rtk-0.6.10/hostapd/hostapd.wpa_psk_conf	1970-01-01 03:00:00.000000000 +0300
+++ hostapd-0.6.10/hostapd/hostapd.wpa_psk_conf	2013-05-02 01:48:29.316224177 +0300
@@ -0,0 +1,127 @@
+#ignore_file_errors=
+#country_code=US
+#ieee80211d=1
+#ieee80211h=1
+#hw_mode=g
+#channel=7
+#beacon_int=100
+#rts_threshold=2347
+#fragm_threshold=2346
+#send_probe_response
+#supported_rates=10 20 55 110 60 90 120 180 240 360 480 540
+#basic_rates=10 20 55 110
+#bridge_packets=1
+#passive_scan_interval=60
+#passive_scan_listen=10000
+#passive_scan_mode=1
+#ap_table_max_size=255
+#ap_table_expiration_time=3600
+interface=wlan0
+#bridge=br0
+driver=rtl8192cd
+debug=4
+logger_syslog_level=2
+logger_stdout_level=2
+logger_syslog=-1
+logger_stdout=-1
+dump_file=/tmp/hostapd.dump
+ssid=hostapd_hcm
+macaddr_acl=0
+#accept_mac_file=/etc/hostapd.accept
+#deny_mac_file=/etc/hostapd.deny
+
+#ap_max_inactivity=300
+#assoc_ap_addr=
+#ieee8021x=1
+eapol_version=1
+#eap_authenticator=
+eap_server=0
+#eap_user_file=/etc/hostapd.eap_user
+#ca_cert=/etc/hostapd.ca.pem
+#server_cert=/etc/hostapd.server.pem
+#private_key=/etc/hostapd.server.prv
+#private_key_passwd=secret passphrase
+#check_crl=1
+#eap_sim_db=unix:/tmp/hlr_auc_gw.sock
+#eap_message=hello
+#wep_key_len_broadcast=5
+#wep_key_len_unicast=5
+#wep_rekey_period=300
+#eap_reauth_period=3600
+eapol_key_index_workaround=0
+#iapp_interface=eth0
+own_ip_addr=192.168.1.254
+#nas_identifier=ap.example.com
+#auth_server_addr=192.168.1.188
+#auth_server_port=1812
+#auth_server_shared_secret=realtek_123
+#acct_server_addr=192.168.1.188
+#acct_server_port=1813
+#acct_server_shared_secret=realtek_123
+#radius_retry_primary_interval=600
+#radius_acct_interim_interval=600
+auth_algs=1
+max_num_sta=32
+wpa=1
+wpa_group_rekey=86400
+#wpa_strict_rekey=1
+#wpa_gmk_rekey=86400
+wpa_passphrase=1234567890
+#wpa_psk=0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
+#wpa_psk_file=/etc/hostapd.wpa_psk
+wpa_key_mgmt=WPA-PSK
+wpa_pairwise=TKIP CCMP
+#rsn_preauth=1
+#rsn_preauth_interfaces=eth0
+#peerkey=1
+ctrl_interface=/var/run/hostapd
+ctrl_interface_group=0
+#radius_server_clients=/etc/hostapd.radius_clients
+#radius_server_auth_port=1812
+#radius_server_ipv6=1
+#test_socket=
+#use_pae_group_addr=1
+dtim_period=2
+ignore_broadcast_ssid=0
+#wep_default_key=0
+#wep_key0=123456789a
+#wep_key1="vwxyz"
+#wep_key2=0102030405060708090a0b0c0d
+#wep_key3=".2.4.6.8.0.23"
+#dynamic_vlan=0
+#vlan_file=/etc/hostapd.vlan
+#vlan_tagged_interface=eht0
+wme_enabled=1
+#bssid=
+#ieee80211w=0
+#wps_disable=
+#wps_upnp_disable=
+#wps_version=
+#wps_uuid=
+#wps_auth_type_flags=
+#wps_encr_type_flags=
+#wps_conn_type_flags=
+#wps_config_methods=
+#wps_configured=
+#wps_rf_bands=
+#wps_default_pin=
+#wps_default_timeout=
+#wps_atheros_extension=
+#wps_manufacturer=
+#wps_model_name=
+#wps_model_number=
+#wps_serial_number=
+#wps_friendly_name=
+#wps_manufacturer_url=
+#wps_model_description=
+#wps_model_url=
+#wps_upc_string=
+#wps_dev_category=
+#wps_dev_sub_category=
+#wps_dev_oui=
+#wps_dev_name=
+#wps_os_version=
+#wps_upnp_root_dir=
+#wps_upnp_desc_url=
+#nfc=0
+#wps_helper=
\ No newline at end of file
Only in hostapd-rtk-0.6.10/hostapd/logwatch: hostapd
diff -purbB --unidirectional-new-file -x '.*' -x '*.o' hostapd-rtk-0.6.10/hostapd/Makefile hostapd-0.6.10/hostapd/Makefile
--- hostapd-rtk-0.6.10/hostapd/Makefile	2013-05-18 17:49:32.433577219 +0300
+++ hostapd-0.6.10/hostapd/Makefile	2013-05-02 01:48:29.296224179 +0300
@@ -3,9 +3,11 @@ CC=gcc
 endif
 
 ifndef CFLAGS
-CFLAGS = -MMD -O2 -Wall -g
+CFLAGS = -MMD -Wall -g
 endif
 
+CFLAGS += -Os
+
 # define HOSTAPD_DUMP_STATE to include SIGUSR1 handler for dumping state to
 # a file (undefine it, if you want to save in binary size)
 CFLAGS += -DHOSTAPD_DUMP_STATE
Only in hostapd-rtk-0.6.10/: ipkg-realtek
Only in hostapd-rtk-0.6.10/patches: 001-common-diff.patch
Only in hostapd-rtk-0.6.10/patches: 002-common-files.patch
Only in hostapd-rtk-0.6.10/patches: 003-hostapd-diff.patch
Only in hostapd-rtk-0.6.10/patches: 004-hostapd-files.patch
Only in hostapd-rtk-0.6.10/patches: 005-supplicant-diff.patch
Only in hostapd-rtk-0.6.10/patches: 008-no-inband.patch
Only in hostapd-rtk-0.6.10/patches: series
diff -purbB --unidirectional-new-file -x '.*' -x '*.o' hostapd-rtk-0.6.10/src/utils/os_unix.c hostapd-0.6.10/src/utils/os_unix.c
--- hostapd-rtk-0.6.10/src/utils/os_unix.c	2013-05-18 17:49:32.321577228 +0300
+++ hostapd-0.6.10/src/utils/os_unix.c	2013-05-02 01:48:29.767224141 +0300
@@ -113,10 +113,11 @@ static int os_daemon(int nochdir, int no
 
 int os_daemonize(const char *pid_file)
 {
-#ifdef __uClinux__
-	return -1;
-#else /* __uClinux__ */
-	if (os_daemon(0, 1)) {
+#ifndef RTK_HAPD
+	if (daemon(0, 0)) {
+#else
+	if (daemon(0, 1)) {
+#endif
 		perror("daemon");
 		return -1;
 	}
@@ -130,7 +131,6 @@ int os_daemonize(const char *pid_file)
 	}
 
 	return -0;
-#endif /* __uClinux__ */
 }
 
 
diff -purbB --unidirectional-new-file -x '.*' -x '*.o' hostapd-rtk-0.6.10/wpa_supplicant/conf/wpa_supplicant.conf hostapd-0.6.10/wpa_supplicant/conf/wpa_supplicant.conf
--- hostapd-rtk-0.6.10/wpa_supplicant/conf/wpa_supplicant.conf	1970-01-01 03:00:00.000000000 +0300
+++ hostapd-0.6.10/wpa_supplicant/conf/wpa_supplicant.conf	2013-05-02 01:48:29.781224140 +0300
@@ -0,0 +1,75 @@
+#update_config=1
+ctrl_interface=/var/run/wpa_supplicant
+eapol_version=1
+ap_scan=1
+fast_reauth=1
+#opensc_engine_path=/usr/lib/opensc/engine_opensc.so
+#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
+#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so
+#driver_param="field=value"
+
+##=============================
+##========RTK CONFIG===========
+
+## Physical band selection
+## 0: SMSP
+## 1: DMSP
+## 2: DMDP	  
+macPhyMode=0
+
+## Physical band selection
+## BIT(0): 2.4G
+## BIT(1): 5G	
+## If use iNIC-92C, use 2.4G only.
+## If use iNIC-92D, whether set 2.4G or 5G, it will try to scan both 2.4G & 5G channels. 
+phyBandSelect=1
+
+##=============================
+
+#country=US
+#dot11RSNAConfigPMKLifetime=43200
+#dot11RSNAConfigPMKReauthThreshold=70
+#dot11RSNAConfigSATimeout=60
+#uuid=12345678-9abc-def0-1234-56789abcdef0
+#device_name=Wireless Client
+#manufacturer=Company
+#model_name=cmodel
+#model_number=123
+#serial_number=12345
+#device_type=1-0050F204-1
+#os_version=01020300
+#wps_cred_processing=0
+
+# Example blocks:
+
+# None Security
+network={
+	ssid="Realtek_AP_OPEN"    
+	key_mgmt=NONE
+	priority=1
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X)
+network={
+	ssid="Realtek_AP_WEP"
+	key_mgmt=NONE
+	wep_key0="12345"
+	wep_tx_keyidx=0
+	priority=5
+	auth_alg=SHARED
+}
+
+
+# Only WPA-PSK is used. Any valid cipher combination is accepted.
+network={
+	ssid="Realtek_AP_WPA"
+	proto=WPA2
+	key_mgmt=WPA-PSK
+	pairwise=CCMP
+	group=CCMP
+	psk="1234567890123"
+	priority=4
+}