From c3035532ab9e362668da1fcb7616487d95f36d10 Mon Sep 17 00:00:00 2001 From: juhosg Date: Thu, 3 Dec 2009 15:07:41 +0000 Subject: ar71xx: DIR-825 support cleanup git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18622 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../base-files/etc/defconfig/dir-825-b1/network | 16 ++ .../base-files/etc/defconfig/dir825b1/network | 16 -- target/linux/ar71xx/base-files/etc/diag.sh | 2 +- target/linux/ar71xx/base-files/lib/ar71xx.sh | 4 +- .../ar71xx/base-files/lib/upgrade/platform.sh | 2 +- target/linux/ar71xx/config-2.6.28 | 1 + target/linux/ar71xx/config-2.6.30 | 2 +- target/linux/ar71xx/config-2.6.31 | 2 +- target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig | 2 +- .../linux/ar71xx/files/arch/mips/ar71xx/Makefile | 2 +- .../files/arch/mips/ar71xx/mach-dir-825-b1.c | 300 +++++++++++++++++++ .../ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c | 317 --------------------- target/linux/ar71xx/files/arch/mips/ar71xx/prom.c | 4 +- .../arch/mips/include/asm/mach-ar71xx/ar71xx.h | 2 +- target/linux/ar71xx/image/Makefile | 2 +- 15 files changed, 329 insertions(+), 345 deletions(-) create mode 100644 target/linux/ar71xx/base-files/etc/defconfig/dir-825-b1/network delete mode 100644 target/linux/ar71xx/base-files/etc/defconfig/dir825b1/network create mode 100644 target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c delete mode 100644 target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c (limited to 'target') diff --git a/target/linux/ar71xx/base-files/etc/defconfig/dir-825-b1/network b/target/linux/ar71xx/base-files/etc/defconfig/dir-825-b1/network new file mode 100644 index 000000000..2d4d8e012 --- /dev/null +++ b/target/linux/ar71xx/base-files/etc/defconfig/dir-825-b1/network @@ -0,0 +1,16 @@ +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + +config interface wan + option ifname eth1 + option proto dhcp diff --git a/target/linux/ar71xx/base-files/etc/defconfig/dir825b1/network b/target/linux/ar71xx/base-files/etc/defconfig/dir825b1/network deleted file mode 100644 index 2d4d8e012..000000000 --- a/target/linux/ar71xx/base-files/etc/defconfig/dir825b1/network +++ /dev/null @@ -1,16 +0,0 @@ -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option ifname eth0 - option type bridge - option proto static - option ipaddr 192.168.1.1 - option netmask 255.255.255.0 - -config interface wan - option ifname eth1 - option proto dhcp diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index c350f2cbc..9178b0a9e 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -42,7 +42,7 @@ get_status_led() { bullet-m | rocket-m | nano-m) status_led="ubnt:green:link4" ;; - dir825b1) + dir-825-b1) status_led="dir825b1:orange:power" ;; ls-sr71) diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index ba4b0a292..1c2e06006 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -19,8 +19,8 @@ ar71xx_board_name() { *AW-NR580) name="aw-nr580" ;; - *DIR825B1) - name="dir825b1" + *"DIR-825 rev. B1") + name="dir-825-b1" ;; *"Bullet M") name="bullet-m" diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 90fa00848..b7e003a81 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -68,7 +68,7 @@ platform_check_image() { [ "$ARGC" -gt 1 ] && return 1 case "$board" in - ap83 | dir825b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m) + ap83 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m) [ "$magic" != "2705" ] && { echo "Invalid image type." return 1 diff --git a/target/linux/ar71xx/config-2.6.28 b/target/linux/ar71xx/config-2.6.28 index 340379068..b15525915 100644 --- a/target/linux/ar71xx/config-2.6.28 +++ b/target/linux/ar71xx/config-2.6.28 @@ -7,6 +7,7 @@ CONFIG_AG71XX=y CONFIG_AR71XX_MACH_AP81=y CONFIG_AR71XX_MACH_AP83=y CONFIG_AR71XX_MACH_AW_NR580=y +CONFIG_AR71XX_MACH_DIR_825_B1=y CONFIG_AR71XX_MACH_GENERIC=y CONFIG_AR71XX_MACH_MZK_W04NU=y CONFIG_AR71XX_MACH_MZK_W300NH=y diff --git a/target/linux/ar71xx/config-2.6.30 b/target/linux/ar71xx/config-2.6.30 index 07e249202..0db13af3c 100644 --- a/target/linux/ar71xx/config-2.6.30 +++ b/target/linux/ar71xx/config-2.6.30 @@ -6,7 +6,7 @@ CONFIG_AG71XX=y CONFIG_AR71XX_MACH_AP81=y CONFIG_AR71XX_MACH_AP83=y CONFIG_AR71XX_MACH_AW_NR580=y -CONFIG_AR71XX_MACH_DIR825B1=y +CONFIG_AR71XX_MACH_DIR_825_B1=y CONFIG_AR71XX_MACH_GENERIC=y CONFIG_AR71XX_MACH_MZK_W04NU=y CONFIG_AR71XX_MACH_MZK_W300NH=y diff --git a/target/linux/ar71xx/config-2.6.31 b/target/linux/ar71xx/config-2.6.31 index 554b00227..2e4a56be4 100644 --- a/target/linux/ar71xx/config-2.6.31 +++ b/target/linux/ar71xx/config-2.6.31 @@ -7,7 +7,7 @@ CONFIG_AG71XX=y CONFIG_AR71XX_MACH_AP81=y CONFIG_AR71XX_MACH_AP83=y CONFIG_AR71XX_MACH_AW_NR580=y -CONFIG_AR71XX_MACH_DIR825B1=y +CONFIG_AR71XX_MACH_DIR_825_B1=y CONFIG_AR71XX_MACH_GENERIC=y CONFIG_AR71XX_MACH_MZK_W04NU=y CONFIG_AR71XX_MACH_MZK_W300NH=y diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig index 37a0e014a..c68115bf5 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig @@ -10,7 +10,7 @@ config AR71XX_MACH_AP83 bool "Atheros AP83 board support" default y -config AR71XX_MACH_DIR825B1 +config AR71XX_MACH_DIR_825_B1 bool "D-Link DIR-825 rev. B1 board support" default y diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile index d77438fbe..8e37c0590 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o -obj-$(CONFIG_AR71XX_MACH_DIR825B1) += mach-dir825b1.o +obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o obj-$(CONFIG_AR71XX_MACH_GENERIC) += mach-generic.o obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c new file mode 100644 index 000000000..ae95febd3 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c @@ -0,0 +1,300 @@ +/* + * D-Link DIR-825 rev. B1 board support + * + * Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o. + * + * based on mach-wndr3700.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "devices.h" + +#define DIR825B1_GPIO_LED_BLUE_USB 0 +#define DIR825B1_GPIO_LED_ORANGE_POWER 1 +#define DIR825B1_GPIO_LED_BLUE_POWER 2 +#define DIR825B1_GPIO_LED_BLUE_POWERSAVE 4 +#define DIR825B1_GPIO_LED_ORANGE_PLANET 6 +#define DIR825B1_GPIO_LED_BLUE_PLANET 11 + +#define DIR825B1_GPIO_BTN_RESET 3 +#define DIR825B1_GPIO_BTN_POWERSAVE 8 + +#define DIR825B1_BUTTONS_POLL_INTERVAL 20 + +#define DIR825B1_CAL_LOCATION_0 0x1f661000 +#define DIR825B1_CAL_LOCATION_1 0x1f665000 + +#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8 +#define DIR825B1_MAC_LOCATION_1 0x2ffa8370 + +static struct ath9k_platform_data dir825b1_wmac0_data; +static struct ath9k_platform_data dir825b1_wmac1_data; +static char dir825b1_wmac0_mac[6]; +static char dir825b1_wmac1_mac[6]; + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition dir825b1_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "config", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "firmware", + .offset = 0x050000, + .size = 0x610000, + } , { + .name = "caldata", + .offset = 0x660000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data dir825b1_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = dir825b1_partitions, + .nr_parts = ARRAY_SIZE(dir825b1_partitions), +#endif +}; + +static struct spi_board_info dir825b1_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .platform_data = &dir825b1_flash_data, + } +}; + +static struct gpio_led dir825b1_leds_gpio[] __initdata = { + { + .name = "dir825b1:blue:usb", + .gpio = DIR825B1_GPIO_LED_BLUE_USB, + .active_low = 1, + }, { + .name = "dir825b1:orange:power", + .gpio = DIR825B1_GPIO_LED_ORANGE_POWER, + .active_low = 1, + }, { + .name = "dir825b1:blue:power", + .gpio = DIR825B1_GPIO_LED_BLUE_POWER, + .active_low = 1, + }, { + .name = "dir825b1:blue:powersave", + .gpio = DIR825B1_GPIO_LED_BLUE_POWERSAVE, + .active_low = 1, + }, { + .name = "dir825b1:orange:planet", + .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET, + .active_low = 1, + }, { + .name = "dir825b1:blue:planet", + .gpio = DIR825B1_GPIO_LED_BLUE_PLANET, + .active_low = 1, + } +}; + +static struct gpio_button dir825b1_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_0, + .threshold = 5, + .gpio = DIR825B1_GPIO_BTN_RESET, + .active_low = 1, + } , { + .desc = "powersave", + .type = EV_KEY, + .code = BTN_1, + .threshold = 5, + .gpio = DIR825B1_GPIO_BTN_POWERSAVE, + .active_low = 1, + } +}; + +#ifdef CONFIG_PCI +static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = { + { + .slot = 0, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV0, + }, { + .slot = 1, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV1, + } +}; + +static int dir825b1_pci_plat_dev_init(struct pci_dev *dev) +{ + switch(PCI_SLOT(dev->devfn)) { + case 17: + dev->dev.platform_data = &dir825b1_wmac0_data; + break; + + case 18: + dev->dev.platform_data = &dir825b1_wmac1_data; + break; + } + + return 0; +} + +static void dir825b1_pci_fixup(struct pci_dev *dev) +{ + void __iomem *mem; + u16 *cal_data; + u16 cmd; + u32 bar0; + u32 val; + + if (ar71xx_mach != AR71XX_MACH_DIR_825_B1) + return; + + dir825b1_pci_plat_dev_init(dev); + cal_data = dev->dev.platform_data; + + if (*cal_data != 0xa55a) { + printk(KERN_ERR "PCI: no calibration data found for %s\n", + pci_name(dev)); + return; + } + + mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); + if (!mem) { + printk(KERN_ERR "PCI: ioremap error for device %s\n", + pci_name(dev)); + return; + } + + printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev)); + + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); + + /* Setup the PCI device to allow access to the internal registers */ + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, AR71XX_PCI_MEM_BASE); + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config_word(dev, PCI_COMMAND, cmd); + + /* set pointer to first reg address */ + cal_data += 3; + while (*cal_data != 0xffff) { + u32 reg; + reg = *cal_data++; + val = *cal_data++; + val |= (*cal_data++) << 16; + + __raw_writel(val, mem + reg); + udelay(100); + } + + pci_read_config_dword(dev, PCI_VENDOR_ID, &val); + dev->vendor = val & 0xffff; + dev->device = (val >> 16) & 0xffff; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); + dev->revision = val & 0xff; + dev->class = val >> 8; /* upper 3 bytes */ + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, cmd); + + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); + + iounmap(mem); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, + dir825b1_pci_fixup); + +static void __init dir825b1_pci_init(void) +{ + memcpy(dir825b1_wmac0_data.eeprom_data, + (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), + sizeof(dir825b1_wmac0_data.eeprom_data)); + + memcpy(dir825b1_wmac1_data.eeprom_data, + (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), + sizeof(dir825b1_wmac1_data.eeprom_data)); + + memcpy(dir825b1_wmac0_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_0), 6); + dir825b1_wmac0_data.macaddr = dir825b1_wmac0_mac; + memcpy(dir825b1_wmac1_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6); + dir825b1_wmac1_data.macaddr = dir825b1_wmac1_mac; + + ar71xx_pci_plat_dev_init = dir825b1_pci_plat_dev_init; + ar71xx_pci_init(ARRAY_SIZE(dir825b1_pci_irqs), dir825b1_pci_irqs); +} +#else +static void __init dir825b1_pci_init(void) { } +#endif /* CONFIG_PCI */ + +static void __init dir825b1_setup(void) +{ + u8 mac[6], i; + + memcpy(mac, (u8*)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6); + for(i = 5; i >= 3; i--) + if(++mac[i] != 0x00) break; + + ar71xx_set_mac_base(mac); + + ar71xx_add_device_mdio(0x0); + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = 0x1e; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_pll_data.pll_1000 = 0x11110000; + + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.phy_mask = 0xc0; + ar71xx_eth1_data.speed = SPEED_1000; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + ar71xx_eth1_pll_data.pll_1000 = 0x11110000; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_spi(NULL, dir825b1_spi_info, + ARRAY_SIZE(dir825b1_spi_info)); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio), + dir825b1_leds_gpio); + + ar71xx_add_device_gpio_buttons(-1, DIR825B1_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(dir825b1_gpio_buttons), + dir825b1_gpio_buttons); + + ar71xx_add_device_usb(); + + dir825b1_pci_init(); +} + +MIPS_MACHINE(AR71XX_MACH_DIR_825_B1, "D-Link DIR-825 rev. B1", dir825b1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c deleted file mode 100644 index dbf244c25..000000000 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir825b1.c +++ /dev/null @@ -1,317 +0,0 @@ -/* - * D-Link DIR-825 rev. B1 board support - * - * Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o. - * - * based on mach-wndr3700.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "devices.h" - - -#define DIR825B1_GPIO_LED_BLUE_USB 0 -#define DIR825B1_GPIO_LED_ORANGE_POWER 1 -#define DIR825B1_GPIO_LED_BLUE_POWER 2 -#define DIR825B1_GPIO_LED_BLUE_POWERSAVE 4 -#define DIR825B1_GPIO_LED_ORANGE_PLANET 6 -#define DIR825B1_GPIO_LED_BLUE_PLANET 11 - -#define DIR825B1_GPIO_BTN_RESET 3 -#define DIR825B1_GPIO_BTN_POWERSAVE 8 - -#define DIR825B1_BUTTONS_POLL_INTERVAL 20 - - -#define DIR825B1_CAL_LOCATION_0 0xbf661000 -#define DIR825B1_CAL_LOCATION_1 0xbf665000 - -#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8 -#define DIR825B1_MAC_LOCATION_1 0x2ffa8370 - - -static struct ath9k_platform_data dir825b1_wmac0_data; -static struct ath9k_platform_data dir825b1_wmac1_data; -static char dir825b1_wmac0_mac[6]; -static char dir825b1_wmac1_mac[6]; - - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition dir825b1_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x040000, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "config", - .offset = 0x040000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "firmware", - .offset = 0x050000, - .size = 0x610000, - } , { - .name = "caldata", - .offset = 0x660000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - } -}; -#endif /* CONFIG_MTD_PARTITIONS */ - - -static struct flash_platform_data dir825b1_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = dir825b1_partitions, - .nr_parts = ARRAY_SIZE(dir825b1_partitions), -#endif -}; - - -static struct spi_board_info dir825b1_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .platform_data = &dir825b1_flash_data, - } -}; - - -static struct gpio_led dir825b1_leds_gpio[] __initdata = { - { - .name = "dir825b1:blue:usb", - .gpio = DIR825B1_GPIO_LED_BLUE_USB, - .active_low = 1, - }, { - .name = "dir825b1:orange:power", - .gpio = DIR825B1_GPIO_LED_ORANGE_POWER, - .active_low = 1, - }, { - .name = "dir825b1:blue:power", - .gpio = DIR825B1_GPIO_LED_BLUE_POWER, - .active_low = 1, - }, { - .name = "dir825b1:blue:powersave", - .gpio = DIR825B1_GPIO_LED_BLUE_POWERSAVE, - .active_low = 1, - }, { - .name = "dir825b1:orange:planet", - .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET, - .active_low = 1, - }, { - .name = "dir825b1:blue:planet", - .gpio = DIR825B1_GPIO_LED_BLUE_PLANET, - .active_low = 1, - } -}; - - -static struct gpio_button dir825b1_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = BTN_0, - .threshold = 5, - .gpio = DIR825B1_GPIO_BTN_RESET, - .active_low = 1, - } , { - .desc = "powersave", - .type = EV_KEY, - .code = BTN_1, - .threshold = 5, - .gpio = DIR825B1_GPIO_BTN_POWERSAVE, - .active_low = 1, - } -}; - - -#ifdef CONFIG_PCI -static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = { - { - .slot = 0, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV0, - }, { - .slot = 1, - .pin = 1, - .irq = AR71XX_PCI_IRQ_DEV1, - } -}; - - -static int dir825b1_pci_plat_dev_init(struct pci_dev *dev) -{ - switch(PCI_SLOT(dev->devfn)) - { - case 17: - dev->dev.platform_data = &dir825b1_wmac0_data; - break; - - case 18: - dev->dev.platform_data = &dir825b1_wmac1_data; - break; - } - - return(0); -} - - -static void dir825b1_pci_fixup(struct pci_dev *dev) -{ - void __iomem *mem; - u16 *cal_data; - u16 cmd; - u32 bar0; - u32 val; - - if (ar71xx_mach != AR71XX_MACH_DIR825B1) return; - - dir825b1_pci_plat_dev_init(dev); - cal_data = dev->dev.platform_data; - - if (*cal_data != 0xa55a) - { - printk(KERN_ERR "PCI: no calibration data found for %s\n", - pci_name(dev)); - return; - } - - mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); - if (!mem) - { - printk(KERN_ERR "PCI: ioremap error for device %s\n", - pci_name(dev)); - return; - } - - printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev)); - - pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); - - /* Setup the PCI device to allow access to the internal registers */ - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, AR71XX_PCI_MEM_BASE); - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config_word(dev, PCI_COMMAND, cmd); - - /* set pointer to first reg address */ - cal_data += 3; - while (*cal_data != 0xffff) - { - u32 reg; - reg = *cal_data++; - val = *cal_data++; - val |= (*cal_data++) << 16; - - __raw_writel(val, mem + reg); - udelay(100); - } - - pci_read_config_dword(dev, PCI_VENDOR_ID, &val); - dev->vendor = val & 0xffff; - dev->device = (val >> 16) & 0xffff; - - pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); - dev->revision = val & 0xff; - dev->class = val >> 8; /* upper 3 bytes */ - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - pci_write_config_word(dev, PCI_COMMAND, cmd); - - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); - - iounmap(mem); -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, - dir825b1_pci_fixup); - - -static void __init dir825b1_pci_init(void) -{ - memcpy(dir825b1_wmac0_data.eeprom_data, - (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), - sizeof(dir825b1_wmac0_data.eeprom_data)); - - memcpy(dir825b1_wmac1_data.eeprom_data, - (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), - sizeof(dir825b1_wmac1_data.eeprom_data)); - - memcpy(dir825b1_wmac0_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_0), 6); - dir825b1_wmac0_data.macaddr = dir825b1_wmac0_mac; - memcpy(dir825b1_wmac1_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6); - dir825b1_wmac1_data.macaddr = dir825b1_wmac1_mac; - - ar71xx_pci_plat_dev_init = dir825b1_pci_plat_dev_init; - ar71xx_pci_init(ARRAY_SIZE(dir825b1_pci_irqs), dir825b1_pci_irqs); -} -#else -static void __init dir825b1_pci_init(void) { } -#endif /* CONFIG_PCI */ - - -static void __init dir825b1_setup(void) -{ - u8 mac[6], i; - - memcpy(mac, (u8*)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6); - for(i = 5; i >= 3; i--) - if(++mac[i] != 0x00) break; - - ar71xx_set_mac_base(mac); - - ar71xx_add_device_mdio(0x0); - - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.phy_mask = 0x1E; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_pll_data.pll_1000 = 0x11110000; - - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = 0xC0; - ar71xx_eth1_data.speed = SPEED_1000; - ar71xx_eth1_data.duplex = DUPLEX_FULL; - ar71xx_eth1_pll_data.pll_1000 = 0x11110000; - - ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); - - ar71xx_add_device_spi(NULL, dir825b1_spi_info, - ARRAY_SIZE(dir825b1_spi_info)); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio), - dir825b1_leds_gpio); - - ar71xx_add_device_gpio_buttons(-1, DIR825B1_BUTTONS_POLL_INTERVAL, - ARRAY_SIZE(dir825b1_gpio_buttons), - dir825b1_gpio_buttons); - - ar71xx_add_device_usb(); - - dir825b1_pci_init(); -} - -MIPS_MACHINE(AR71XX_MACH_DIR825B1, "D-Link DIR825B1", dir825b1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c b/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c index ec7eed8e6..cc0d5aeb0 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/prom.c @@ -59,8 +59,8 @@ static struct board_rec boards[] __initdata = { .name = "AW-NR580", .mach_type = AR71XX_MACH_AW_NR580, }, { - .name = "DIR825B1", - .mach_type = AR71XX_MACH_DIR825B1, + .name = "DIR-825-B1", + .mach_type = AR71XX_MACH_DIR_825_B1, }, { .name = "TEW-632BRP", .mach_type = AR71XX_MACH_TEW_632BRP, diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h index f26fc85ee..7f61c1440 100644 --- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h +++ b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ar71xx/ar71xx.h @@ -124,7 +124,7 @@ enum ar71xx_mach_type { AR71XX_MACH_AP81, /* Atheros AP81 */ AR71XX_MACH_AP83, /* Atheros AP83 */ AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */ - AR71XX_MACH_DIR825B1, /* D-Link DIR-825 rev. B1 */ + AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 8a5dbe6ea..da2f8fd50 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -483,7 +483,7 @@ define Image/Build/Profile/WRT400N endef define Image/Build/Profile/DIR825B1 - $(call Image/Build/Template/DIR825B1/$(1),dir825b1,board=DIR825B1) + $(call Image/Build/Template/DIR825B1/$(1),dir-825-b1,board=DIR-825-B1) endef define Image/Build/Profile/WRT160NL -- cgit v1.2.3