From 547875d0c985f6eb3fd27320457585ae3c6a19c0 Mon Sep 17 00:00:00 2001 From: florian Date: Fri, 20 May 2011 10:06:15 +0000 Subject: [brcm63xx] add support for D-Link DVA-G3810BN/TL This patch adds support for D-Link's DVA-G3810BN/TL product. Signed-off-by: Roman Dumycz git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26956 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../base-files/etc/defconfig/DVAG3810BN/network | 29 ++++++++++++++++++++++ .../linux/brcm63xx/base-files/etc/init.d/defconfig | 4 +++ target/linux/brcm63xx/image/Makefile | 2 ++ 3 files changed, 35 insertions(+) create mode 100644 target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network (limited to 'target') diff --git a/target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network b/target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network new file mode 100644 index 000000000..181ca011c --- /dev/null +++ b/target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network @@ -0,0 +1,29 @@ +# Copyright (C) 2008 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option type bridge + option ifname eth1.1 + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + option nat 1 + +config interface wan + option ifname eth0 + option proto dhcp + +config switch eth1 + option enable 1 + option enable_vlan 1 + option reset 1 + +config switch_vlan + option vlan 1 + option device eth1 + option ports "0 1 2 3 5t" diff --git a/target/linux/brcm63xx/base-files/etc/init.d/defconfig b/target/linux/brcm63xx/base-files/etc/init.d/defconfig index dac9c2344..8fd783d4d 100755 --- a/target/linux/brcm63xx/base-files/etc/init.d/defconfig +++ b/target/linux/brcm63xx/base-files/etc/init.d/defconfig @@ -8,6 +8,10 @@ START=05 start() { local board=$(awk 'BEGIN{FS="[ \t:/]+"} /system type/ {print $4}' /proc/cpuinfo) + if [ "$board" = "96358VW" ] && [ -e /proc/switch/eth1/enable ]; then + board="DVAG3810BN" + fi + [ ! -d /etc/defconfig/$board ] && board="generic" for f in $( ls /etc/defconfig/$board ); do diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile index bf292de7e..f1fa4f540 100644 --- a/target/linux/brcm63xx/image/Makefile +++ b/target/linux/brcm63xx/image/Makefile @@ -195,6 +195,8 @@ define Image/Build $(call Image/Build/CFEFIXUP,$(1),96358GW,AW4139,6358,DSL274XB-C2) # D-Link DSL-2740B/DSL-2741B, rev C3 $(call Image/Build/CFE,$(1),AW4139,6358,DSL274XB-C3) + # D-Link DVA-G3810BN/TL + $(call Image/Build/CFE,$(1),96358GW,6358,DVAG3810BN) # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B $(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811) -- cgit v1.2.3