From 863d4e55d391b9f2b7a43350a286138dd0dbdc00 Mon Sep 17 00:00:00 2001 From: nbd Date: Tue, 4 Dec 2007 12:49:54 +0000 Subject: Fix VLYNQ device enable for DG834Gv1 This patch allows VLYNQ devices on the DG834Gv1 to be successfully enabled. Currently the "__vlynq_enable_device" function attempts to set the VLYNQ device clock divisor to values from 1 through 8 until a link is successfully established. On the DG834Gv1 (but not the DG834Gv2), setting the VLYNQ device clock divisor to 1 (full rate) results in all further VLYNQ operations failing (including software reset), so the device is never enabled. This patches changes the function to only attempt divisors 2 through 8, and hence the device is successfully enabled. Signed-off-by: Nick Forbes --------- git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9656 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ar7/files/drivers/vlynq/vlynq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'target/linux') diff --git a/target/linux/ar7/files/drivers/vlynq/vlynq.c b/target/linux/ar7/files/drivers/vlynq/vlynq.c index 0dd6c1830..374562c6c 100644 --- a/target/linux/ar7/files/drivers/vlynq/vlynq.c +++ b/target/linux/ar7/files/drivers/vlynq/vlynq.c @@ -373,7 +373,7 @@ static int __vlynq_enable_device(struct vlynq_device *dev) case vlynq_div_auto: /* Only try locally supplied clock, others cause problems */ vlynq_reg_write(dev->remote->control, 0); - for (i = vlynq_ldiv1; i <= vlynq_ldiv8; i++) { + for (i = vlynq_ldiv2; i <= vlynq_ldiv8; i++) { vlynq_reg_write(dev->local->control, VLYNQ_CTRL_CLOCK_INT | VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1)); -- cgit v1.2.3