From 18aeebfc58638705326c09bb48d96900deaf2b39 Mon Sep 17 00:00:00 2001 From: kaloz Date: Sun, 27 Apr 2008 17:03:01 +0000 Subject: add preliminary support for Storm SL3512 based devices, not ready yet git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10956 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/storm/patches/1100-gpio.patch | 390 +++++++++++++++++++++++++++++ 1 file changed, 390 insertions(+) create mode 100644 target/linux/storm/patches/1100-gpio.patch (limited to 'target/linux/storm/patches/1100-gpio.patch') diff --git a/target/linux/storm/patches/1100-gpio.patch b/target/linux/storm/patches/1100-gpio.patch new file mode 100644 index 000000000..d2ea7279b --- /dev/null +++ b/target/linux/storm/patches/1100-gpio.patch @@ -0,0 +1,390 @@ +Index: linux-2.6.23.16/drivers/char/gemini_gpio_dev.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23.16/drivers/char/gemini_gpio_dev.c 2008-03-15 17:05:28.382258620 +0200 +@@ -0,0 +1,356 @@ ++/* ++ * GPIO driver for Gemini board ++ * Provides /dev/gpio ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include /* copy_to_user, copy_from_user */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#define GEMINI_GPIO_BASE1 IO_ADDRESS(SL2312_GPIO_BASE) ++#define GEMINI_GPIO_BASE2 IO_ADDRESS(SL2312_GPIO_BASE1) ++ ++#define GPIO_SET 2 ++#define MAX_GPIO_LINE 32*GPIO_SET ++ ++wait_queue_head_t gemini_gpio_wait[MAX_GPIO_LINE]; ++ ++enum GPIO_REG ++{ ++ GPIO_DATA_OUT = 0x00, ++ GPIO_DATA_IN = 0x04, ++ GPIO_PIN_DIR = 0x08, ++ GPIO_BY_PASS = 0x0C, ++ GPIO_DATA_SET = 0x10, ++ GPIO_DATA_CLEAR = 0x14, ++ GPIO_PULL_ENABLE = 0x18, ++ GPIO_PULL_TYPE = 0x1C, ++ GPIO_INT_ENABLE = 0x20, ++ GPIO_INT_RAW_STATUS = 0x24, ++ GPIO_INT_MASK_STATUS = 0x28, ++ GPIO_INT_MASK = 0x2C, ++ GPIO_INT_CLEAR = 0x30, ++ GPIO_INT_TRIG = 0x34, ++ GPIO_INT_BOTH = 0x38, ++ GPIO_INT_POLAR = 0x3C ++}; ++ ++unsigned int regist_gpio_int0=0,regist_gpio_int1=0; ++ ++/* defines a specific GPIO bit number and state */ ++struct gpio_bit { ++ unsigned char bit; ++ unsigned char state; ++}; ++ ++#define GPIO_MAJOR 10 ++#define GPIO_MINOR 127 ++ ++/* ++ * ioctl calls that are permitted to the /dev/gpio interface ++ */ ++#define GPIO_GET_BIT 0x0000001 ++#define GPIO_SET_BIT 0x0000002 ++#define GPIO_GET_CONFIG 0x0000003 ++#define GPIO_SET_CONFIG 0x0000004 ++ ++//#define GPIO_CONFIG_OUT 1 ++//#define GPIO_CONFIG_IN 2 ++ ++ ++ ++#define DEVICE_NAME "gpio" ++ ++//#define DEBUG ++ ++/* ++ * GPIO interface ++ */ ++ ++/* /dev/gpio */ ++static int gpio_ioctl(struct inode *inode, struct file *file, ++ unsigned int cmd, unsigned long arg); ++ ++/* /proc/driver/gpio */ ++static int gpio_read_proc(char *page, char **start, off_t off, ++ int count, int *eof, void *data); ++ ++static unsigned char gpio_status; /* bitmapped status byte. */ ++ ++/* functions for set/get gpio lines on storlink cpu */ ++ ++void gpio_line_get(unsigned char pin, u32 * data) ++{ ++ unsigned int set = pin >>5; // each GPIO set has 32 pins ++ unsigned int status,addr; ++ ++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1) + GPIO_DATA_IN; ++ status = readl(addr); ++#ifdef DEBUG ++ printk("status = %08X, pin = %d, set = %d\n", status, pin, set); ++#endif ++ if (set) ++ *data = (status&(1<<(pin-32)))?1:0; ++ else ++ *data = (status&(1<>5; // each GPIO set has 32 pins ++ unsigned int status=0,addr; ++ ++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+(high?GPIO_DATA_SET:GPIO_DATA_CLEAR); ++ ++ status &= ~(1 << (pin %32)); ++ status |= (1 << (pin % 32)); ++ writel(status,addr); ++} ++ ++/* ++ * pin = [0..63] ++ * mode = ++ * 1 -- OUT ++ * 2 -- IN ++ */ ++void gpio_line_config(unsigned char pin, unsigned char mode) ++{ ++ unsigned char set = pin >>5; // each GPIO set has 32 pins ++ unsigned int status,addr; ++ ++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PIN_DIR; ++ status = readl(addr); ++ ++ status &= ~(1 << (pin %32)); ++ if (mode == 1) ++ status |= (1 << (pin % 32)); /* PinDir: 0 - input, 1 - output */ ++ ++ writel(status,addr); ++#if 0 ++ /* enable pullup-high if mode is input */ ++ ++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PULL_ENABLE; ++ status = readl(addr); ++ ++ status &= ~(1 << (pin %32)); ++ if (mode == 2) /* input */ ++ status |= (1 << (pin % 32)); /* PullEnable: 0 - disable, 1 - enable */ ++ ++ writel(status,addr); ++ ++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PULL_TYPE; ++ status = readl(addr); ++ ++ status &= ~(1 << (pin %32)); ++ if (mode == 2) /* input */ ++ status |= (1 << (pin % 32)); /* PullType: 0 - low, 1 - high */ ++ ++ writel(status,addr); ++#endif ++} ++ ++#define GPIO_IS_OPEN 0x01 /* means /dev/gpio is in use */ ++ ++/* ++ * Now all the various file operations that we export. ++ */ ++static int gpio_ioctl(struct inode *inode, struct file *file, ++ unsigned int cmd, unsigned long arg) ++{ ++ struct gpio_bit bit; ++ u32 val; ++ ++ if (copy_from_user(&bit, (struct gpio_bit *)arg, ++ sizeof(bit))) ++ return -EFAULT; ++ ++ switch (cmd) { ++ ++ case GPIO_GET_BIT: ++ gpio_line_get(bit.bit, &val); ++ bit.state = val; ++ return copy_to_user((void *)arg, &bit, sizeof(bit)) ? -EFAULT : 0; ++ case GPIO_SET_BIT: ++ val = bit.state; ++ gpio_line_set(bit.bit, val); ++ return 0; ++ case GPIO_GET_CONFIG: ++ // gpio_line_config(bit.bit, bit.state); ++ return copy_to_user((void *)arg, &bit, sizeof(bit)) ? -EFAULT : 0; ++ case GPIO_SET_CONFIG: ++ val = bit.state; ++ gpio_line_config(bit.bit, bit.state); ++ return 0; ++ } ++ return -EINVAL; ++} ++ ++ ++static int gpio_open(struct inode *inode, struct file *file) ++{ ++ if (gpio_status & GPIO_IS_OPEN) ++ return -EBUSY; ++ ++ gpio_status |= GPIO_IS_OPEN; ++ return 0; ++} ++ ++ ++static int gpio_release(struct inode *inode, struct file *file) ++{ ++ /* ++ * Turn off all interrupts once the device is no longer ++ * in use and clear the data. ++ */ ++ ++ gpio_status &= ~GPIO_IS_OPEN; ++ return 0; ++} ++ ++ ++/* ++ * The various file operations we support. ++ */ ++ ++static struct file_operations gpio_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = gpio_ioctl, ++ .open = gpio_open, ++ .release = gpio_release, ++}; ++ ++static struct miscdevice gpio_dev = ++{ ++ .minor = GPIO_MINOR, ++ .name = "gpio", ++ .fops = &gpio_fops, ++}; ++ ++ ++ ++ ++#ifdef CONFIG_PROC_FS ++static struct proc_dir_entry *dir; ++ ++/* ++ * Info exported via "/proc/driver/gpio". ++ */ ++static int gpio_get_status(char *buf) ++{ ++ char *p = buf; ++ u32 val = 0; ++ int i; ++ int bit; ++#ifdef DEBUG ++ u32 addr; ++ ++ for (i = 0; i < 0x20; i+=4 ) { ++ addr = IO_ADDRESS(SL2312_GPIO_BASE) + i; ++ val = readl(addr); ++ p+=sprintf(p, "GPIO0: 0x%02X: %08X\n", i, val ); ++ } ++ for (i = 0; i < 0x20; i+=4 ) { ++ addr = IO_ADDRESS(SL2312_GPIO_BASE1) + i; ++ val = readl(addr); ++ p+=sprintf(p, "GPIO1: 0x%02X: %08X\n", i, val ); ++ } ++#endif ++ ++ for (i = 0; i < 32; i++) { ++ gpio_line_get(i, &bit); ++ if (bit) ++ val |= (1 << i); ++ } ++ p += sprintf(p, "gpio0\t: 0x%08x\n", val); ++ ++ val = 0; ++ for (i = 32; i < 64; i++) { ++ gpio_line_get(i, &bit); ++ if (bit) ++ val |= (1 << i); ++ } ++ p += sprintf(p, "gpio1\t: 0x%08x\n", val); ++ ++ return p - buf; ++} ++ ++ ++/* /proc/driver/gpio read op ++ */ ++static int gpio_read_proc(char *page, char **start, off_t off, ++ int count, int *eof, void *data) ++{ ++ int len = gpio_get_status (page); ++ ++ if (len <= off+count) ++ *eof = 1; ++ *start = page + off; ++ len -= off; ++ if ( len > count ) ++ len = count; ++ if ( len < 0 ) ++ len = 0; ++ return len; ++} ++#endif /* CONFIG_PROC_FS */ ++ ++ ++static int __init gpio_init_module(void) ++{ ++ int retval; ++#ifdef CONFIG_PROC_FS ++ struct proc_dir_entry *res; ++#endif ++ ++ /* register /dev/gpio file ops */ ++ //retval = register_chrdev(GPIO_MAJOR, DEVICE_NAME, &gpio_fops); ++ retval = misc_register(&gpio_dev); ++ if(retval < 0) ++ return retval; ++ ++#ifdef CONFIG_PROC_FS ++ dir = proc_mkdir("driver/gpio", NULL); ++ if (!dir) { ++ misc_deregister(&gpio_dev); ++ return -ENOMEM; ++ } ++ /* register /proc/driver/gpio */ ++ res = create_proc_entry("info", 0644, dir); ++ if (res) { ++ res->read_proc= gpio_read_proc; ++ } else { ++ misc_deregister(&gpio_dev); ++ return -ENOMEM; ++ } ++#endif ++ ++ printk("%s: GPIO driver loaded\n", __FILE__); ++ ++ return 0; ++} ++ ++static void __exit gpio_cleanup_module(void) ++{ ++ remove_proc_entry ("info", dir); ++ misc_deregister(&gpio_dev); ++ ++ printk("%s: GPIO driver unloaded\n", __FILE__); ++} ++ ++module_init(gpio_init_module); ++module_exit(gpio_cleanup_module); ++ ++MODULE_AUTHOR("Jonas Majauskas"); ++MODULE_LICENSE("GPL"); ++ +Index: linux-2.6.23.16/drivers/char/Kconfig +=================================================================== +--- linux-2.6.23.16.orig/drivers/char/Kconfig 2008-03-13 17:45:54.000221290 +0200 ++++ linux-2.6.23.16/drivers/char/Kconfig 2008-03-15 17:05:09.381175866 +0200 +@@ -1064,5 +1064,12 @@ + + source "drivers/s390/char/Kconfig" + ++config GEMINI_GPIO_DEV ++ tristate "GPIO driver for Gemini board (provides /dev/gpio)" ++ depends on ARCH_SL2312 ++ default n ++ help ++ GPIO driver for Gemini boards - SL3512, SL3516. ++ + endmenu + +Index: linux-2.6.23.16/drivers/char/Makefile +=================================================================== +--- linux-2.6.23.16.orig/drivers/char/Makefile 2008-03-15 17:04:35.879266660 +0200 ++++ linux-2.6.23.16/drivers/char/Makefile 2008-03-15 17:05:09.381175866 +0200 +@@ -115,6 +115,7 @@ + + obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o + obj-$(CONFIG_TCG_TPM) += tpm/ ++obj-$(CONFIG_GEMINI_GPIO_DEV) += gemini_gpio_dev.o + + obj-$(CONFIG_PS3_FLASH) += ps3flash.o + -- cgit v1.2.3