From a95f9f92e2953d5829a29e95644dc4c4bc93f590 Mon Sep 17 00:00:00 2001 From: mirko Date: Sat, 13 Dec 2008 01:54:56 +0000 Subject: change prefix for kernelpatchbase 2.6.26 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13619 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../patches-2.6.26/1007-gta01-core.patch.patch | 831 +++++++++++++++++++++ 1 file changed, 831 insertions(+) create mode 100755 target/linux/s3c24xx/patches-2.6.26/1007-gta01-core.patch.patch (limited to 'target/linux/s3c24xx/patches-2.6.26/1007-gta01-core.patch.patch') diff --git a/target/linux/s3c24xx/patches-2.6.26/1007-gta01-core.patch.patch b/target/linux/s3c24xx/patches-2.6.26/1007-gta01-core.patch.patch new file mode 100755 index 000000000..7acdfb579 --- /dev/null +++ b/target/linux/s3c24xx/patches-2.6.26/1007-gta01-core.patch.patch @@ -0,0 +1,831 @@ +From 821c65f3420494eadf5260e48b54b9f59e6e865c Mon Sep 17 00:00:00 2001 +From: mokopatches +Date: Wed, 16 Jul 2008 14:44:42 +0100 +Subject: [PATCH] gta01-core.patch + This patch adds support for the FIC Neo1973 GTA01 machine type to the ARM port + of the Linux kernel. + +Signed-off-by: Harald Welte +--- + MAINTAINERS | 8 + + arch/arm/mach-s3c2410/Kconfig | 8 + + arch/arm/mach-s3c2410/Makefile | 10 + + arch/arm/mach-s3c2410/mach-gta01.c | 658 ++++++++++++++++++++++++++++++++++ + arch/arm/plat-s3c24xx/Kconfig | 5 + + include/asm-arm/arch-s3c2410/gta01.h | 70 ++++ + 6 files changed, 759 insertions(+), 0 deletions(-) + create mode 100644 arch/arm/mach-s3c2410/mach-gta01.c + create mode 100644 include/asm-arm/arch-s3c2410/gta01.h + +diff --git a/MAINTAINERS b/MAINTAINERS +index 56a2f67..9c1a796 100644 +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -1664,6 +1664,14 @@ P: Akinobu Mita + M: akinobu.mita@gmail.com + S: Supported + ++FIC/OPENMOKO NEO1973 GSM PHONE ++P: Harald Welte ++M: laforge@openmoko.org ++L: openmoko-kernel@lists.openmoko.org ++W: http://wiki.openmoko.org/wiki/Kernel ++W: http://wiki.openmoko.org/wiki/Neo1973 ++S: Maintained ++ + FRAMEBUFFER LAYER + P: Antonino Daplas + M: adaplas@gmail.com +diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig +index cd3dc08..7e3a1a2 100644 +--- a/arch/arm/mach-s3c2410/Kconfig ++++ b/arch/arm/mach-s3c2410/Kconfig +@@ -117,5 +117,13 @@ config MACH_QT2410 + help + Say Y here if you are using the Armzone QT2410 + ++config MACH_NEO1973_GTA01 ++ bool "FIC Neo1973 GSM Phone (GTA01 Hardware)" ++ select CPU_S3C2410 ++ select MACH_NEO1973 ++ select SENSORS_PCF50606 ++ help ++ Say Y here if you are using the FIC Neo1973 GSM Phone ++ + endmenu + +diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile +index cabc13c..b73562f 100644 +--- a/arch/arm/mach-s3c2410/Makefile ++++ b/arch/arm/mach-s3c2410/Makefile +@@ -30,3 +30,13 @@ obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o + obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o + obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o + obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o ++ ++# Common bits of machine support ++ ++obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o ++ ++# machine additions ++ ++obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o ++obj-$(CONFIG_MACH_NEO1973_GTA01)+= mach-gta01.o ++ +diff --git a/arch/arm/mach-s3c2410/mach-gta01.c b/arch/arm/mach-s3c2410/mach-gta01.c +new file mode 100644 +index 0000000..e690ed7 +--- /dev/null ++++ b/arch/arm/mach-s3c2410/mach-gta01.c +@@ -0,0 +1,658 @@ ++/* ++ * linux/arch/arm/mach-s3c2410/mach-gta01.c ++ * ++ * S3C2410 Machine Support for the FIC Neo1973 GTA01 ++ * ++ * Copyright (C) 2006-2007 by OpenMoko, Inc. ++ * Author: Harald Welte ++ * All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static struct map_desc gta01_iodesc[] __initdata = { ++ { ++ .virtual = 0xe0000000, ++ .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000), ++ .length = SZ_1M, ++ .type = MT_DEVICE ++ }, ++}; ++ ++#define UCON S3C2410_UCON_DEFAULT ++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB ++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE ++ ++static struct s3c2410_uartcfg gta01_uartcfgs[] = { ++ [0] = { ++ .hwport = 0, ++ .flags = 0, ++ .ucon = UCON, ++ .ulcon = ULCON, ++ .ufcon = UFCON, ++ }, ++ [1] = { ++ .hwport = 1, ++ .flags = 0, ++ .ucon = UCON, ++ .ulcon = ULCON, ++ .ufcon = UFCON, ++ }, ++}; ++ ++/* PMU driver info */ ++ ++static int pmu_callback(struct device *dev, unsigned int feature, ++ enum pmu_event event) ++{ ++ switch (feature) { ++ case PCF50606_FEAT_ACD: ++ switch (event) { ++ case PMU_EVT_INSERT: ++ pcf50606_charge_fast(pcf50606_global, 1); ++ break; ++ case PMU_EVT_REMOVE: ++ pcf50606_charge_fast(pcf50606_global, 0); ++ break; ++ default: ++ break; ++ } ++ break; ++ default: ++ break; ++ } ++ ++ return 0; ++} ++ ++static struct pcf50606_platform_data gta01_pcf_pdata = { ++ .used_features = PCF50606_FEAT_EXTON | ++ PCF50606_FEAT_MBC | ++ PCF50606_FEAT_BBC | ++ PCF50606_FEAT_RTC | ++ PCF50606_FEAT_WDT | ++ PCF50606_FEAT_CHGCUR | ++ PCF50606_FEAT_BATVOLT | ++ PCF50606_FEAT_BATTEMP, ++ .onkey_seconds_required = 3, ++ .cb = &pmu_callback, ++ .r_fix_batt = 10000, ++ .r_fix_batt_par = 10000, ++ .r_sense_milli = 220, ++ .rails = { ++ [PCF50606_REGULATOR_D1REG] = { ++ .name = "bt_3v15", ++ .voltage = { ++ .init = 3150, ++ .max = 3150, ++ }, ++ }, ++ [PCF50606_REGULATOR_D2REG] = { ++ .name = "gl_2v5", ++ .voltage = { ++ .init = 2500, ++ .max = 2500, ++ }, ++ }, ++ [PCF50606_REGULATOR_D3REG] = { ++ .name = "stby_1v8", ++ .flags = PMU_VRAIL_F_SUSPEND_ON, ++ .voltage = { ++ .init = 1800, ++ .max = 2100, ++ }, ++ }, ++ [PCF50606_REGULATOR_DCD] = { ++ .name = "gl_1v5", ++ .voltage = { ++ .init = 1500, ++ .max = 1500, ++ }, ++ }, ++ [PCF50606_REGULATOR_DCDE] = { ++ .name = "io_3v3", ++ .flags = PMU_VRAIL_F_SUSPEND_ON, ++ .voltage = { ++ .init = 3300, ++ .max = 3330, ++ }, ++ }, ++ [PCF50606_REGULATOR_DCUD] = { ++ .name = "core_1v8", ++ .flags = PMU_VRAIL_F_SUSPEND_ON, ++ .voltage = { ++ .init = 2100, ++ .max = 2100, ++ }, ++ }, ++ [PCF50606_REGULATOR_IOREG] = { ++ .name = "codec_3v3", ++ .voltage = { ++ .init = 3300, ++ .max = 3300, ++ }, ++ }, ++ [PCF50606_REGULATOR_LPREG] = { ++ .name = "lcm_3v3", ++ .voltage = { ++ .init = 3300, ++ .max = 3300, ++ }, ++ } ++ }, ++}; ++ ++static void cfg_pmu_vrail(struct pmu_voltage_rail *vrail, char *name, ++ unsigned int flags, unsigned int init, ++ unsigned int max) ++{ ++ vrail->name = name; ++ vrail->flags = flags; ++ vrail->voltage.init = init; ++ vrail->voltage.max = max; ++} ++ ++static void mangle_pmu_pdata_by_system_rev(void) ++{ ++ switch (system_rev) { ++ case GTA01Bv4_SYSTEM_REV: ++ gta01_pcf_pdata.used_features |= PCF50606_FEAT_ACD; ++ break; ++ case GTA01Bv3_SYSTEM_REV: ++ case GTA01Bv2_SYSTEM_REV: ++ gta01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG] ++ .name = "user1"; ++ gta01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG] ++ .flags &= ~PMU_VRAIL_F_SUSPEND_ON; ++ gta01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG] ++ .flags = PMU_VRAIL_F_UNUSED; ++ break; ++ case GTA01v4_SYSTEM_REV: ++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCUD], ++ "core_1v8", PMU_VRAIL_F_SUSPEND_ON, 1800, 1800); ++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D1REG], ++ "vrf_3v", 0, 3000, 3000); ++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG], ++ "vtcxo_2v8", 0, 2800, 2800); ++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCD], ++ "gl_3v5", 0, 3500, 3500); ++ break; ++ case GTA01v3_SYSTEM_REV: ++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D1REG], ++ "vrf_3v", 0, 3000, 3000); ++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D2REG], ++ "sd_3v3", 0, 3300, 3300); ++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG], ++ "codec_3v3", 0, 3300, 3300); ++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCD], ++ "gpsio_3v3", 0, 3300, 3300); ++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCUD], ++ "core_1v8", PMU_VRAIL_F_SUSPEND_ON, 1800, 1800); ++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_IOREG], ++ "vtcxo_2v8", 0, 2800, 2800); ++ break; ++ } ++} ++ ++static struct resource gta01_pmu_resources[] = { ++ [0] = { ++ .flags = IORESOURCE_IRQ, ++ .start = GTA01_IRQ_PCF50606, ++ .end = GTA01_IRQ_PCF50606, ++ }, ++}; ++ ++struct platform_device gta01_pmu_dev = { ++ .name = "pcf50606", ++ .num_resources = ARRAY_SIZE(gta01_pmu_resources), ++ .resource = gta01_pmu_resources, ++ .dev = { ++ .platform_data = >a01_pcf_pdata, ++ }, ++}; ++ ++/* LCD driver info */ ++ ++/* Configuration for 480x640 toppoly TD028TTEC1. ++ * Do not mark this as __initdata or it will break! */ ++static struct s3c2410fb_display gta01_displays[] = { ++ { ++ .type = S3C2410_LCDCON1_TFT, ++ .width = 43, ++ .height = 58, ++ .xres = 480, ++ .yres = 640, ++ .bpp = 16, ++ ++ .pixclock = 40000, /* HCLK/4 */ ++ .left_margin = 104, ++ .right_margin = 8, ++ .hsync_len = 8, ++ .upper_margin = 2, ++ .lower_margin = 16, ++ .vsync_len = 2, ++ .lcdcon5 = S3C2410_LCDCON5_FRM565 | ++ S3C2410_LCDCON5_INVVCLK | ++ S3C2410_LCDCON5_INVVLINE | ++ S3C2410_LCDCON5_INVVFRAME | ++ S3C2410_LCDCON5_PWREN | ++ S3C2410_LCDCON5_HWSWP, ++ }, ++ { ++ .type = S3C2410_LCDCON1_TFT, ++ .width = 43, ++ .height = 58, ++ .xres = 480, ++ .yres = 640, ++ .bpp = 32, ++ ++ .pixclock = 40000, /* HCLK/4 */ ++ .left_margin = 104, ++ .right_margin = 8, ++ .hsync_len = 8, ++ .upper_margin = 2, ++ .lower_margin = 16, ++ .vsync_len = 2, ++ .lcdcon5 = S3C2410_LCDCON5_FRM565 | ++ S3C2410_LCDCON5_INVVCLK | ++ S3C2410_LCDCON5_INVVLINE | ++ S3C2410_LCDCON5_INVVFRAME | ++ S3C2410_LCDCON5_PWREN | ++ S3C2410_LCDCON5_HWSWP, ++ }, ++ { ++ .type = S3C2410_LCDCON1_TFT, ++ .width = 43, ++ .height = 58, ++ .xres = 240, ++ .yres = 320, ++ .bpp = 16, ++ ++ .pixclock = 40000, /* HCLK/4 */ ++ .left_margin = 104, ++ .right_margin = 8, ++ .hsync_len = 8, ++ .upper_margin = 2, ++ .lower_margin = 16, ++ .vsync_len = 2, ++ .lcdcon5 = S3C2410_LCDCON5_FRM565 | ++ S3C2410_LCDCON5_INVVCLK | ++ S3C2410_LCDCON5_INVVLINE | ++ S3C2410_LCDCON5_INVVFRAME | ++ S3C2410_LCDCON5_PWREN | ++ S3C2410_LCDCON5_HWSWP, ++ }, ++}; ++ ++static struct s3c2410fb_mach_info gta01_lcd_cfg __initdata = { ++ .displays = gta01_displays, ++ .num_displays = ARRAY_SIZE(gta01_displays), ++ .default_display = 0, ++ ++ .lpcsel = ((0xCE6) & ~7) | 1<<4, ++}; ++ ++static struct platform_device *gta01_devices[] __initdata = { ++ &s3c_device_usb, ++ &s3c_device_lcd, ++ &s3c_device_wdt, ++ &s3c_device_i2c, ++ &s3c_device_iis, ++ &s3c_device_sdi, ++ &s3c_device_usbgadget, ++ &s3c_device_nand, ++}; ++ ++static struct s3c2410_nand_set gta01_nand_sets[] = { ++ [0] = { ++ .name = "neo1973-nand", ++ .nr_chips = 1, ++ .flags = S3C2410_NAND_BBT, ++ }, ++}; ++ ++static struct s3c2410_platform_nand gta01_nand_info = { ++ .tacls = 20, ++ .twrph0 = 60, ++ .twrph1 = 20, ++ .nr_sets = ARRAY_SIZE(gta01_nand_sets), ++ .sets = gta01_nand_sets, ++}; ++ ++static void gta01_udc_command(enum s3c2410_udc_cmd_e cmd) ++{ ++ printk(KERN_DEBUG "%s(%d)\n", __func__, cmd); ++ ++ switch (cmd) { ++ case S3C2410_UDC_P_ENABLE: ++ s3c2410_gpio_setpin(GTA01_GPIO_USB_PULLUP, 1); ++ break; ++ case S3C2410_UDC_P_DISABLE: ++ s3c2410_gpio_setpin(GTA01_GPIO_USB_PULLUP, 0); ++ break; ++ default: ++ break; ++ } ++} ++ ++/* use a work queue, since I2C API inherently schedules ++ * and we get called in hardirq context from UDC driver */ ++ ++struct vbus_draw { ++ struct work_struct work; ++ int ma; ++}; ++static struct vbus_draw gta01_udc_vbus_drawer; ++ ++static void __gta01_udc_vbus_draw(struct work_struct *work) ++{ ++ /* this is a fix to work around boot-time ordering problems if the ++ * s3c2410_udc is initialized before the pcf50606 driver has defined ++ * pcf50606_global */ ++ if (!pcf50606_global) ++ return; ++ ++ if (gta01_udc_vbus_drawer.ma >= 500) { ++ /* enable fast charge */ ++ printk(KERN_DEBUG "udc: enabling fast charge\n"); ++ pcf50606_charge_fast(pcf50606_global, 1); ++ } else { ++ /* disable fast charge */ ++ printk(KERN_DEBUG "udc: disabling fast charge\n"); ++ pcf50606_charge_fast(pcf50606_global, 0); ++ } ++} ++ ++static void gta01_udc_vbus_draw(unsigned int ma) ++{ ++ gta01_udc_vbus_drawer.ma = ma; ++ schedule_work(>a01_udc_vbus_drawer.work); ++} ++ ++static struct s3c2410_udc_mach_info gta01_udc_cfg = { ++ .vbus_draw = gta01_udc_vbus_draw, ++}; ++ ++/* SPI */ ++ ++static struct spi_board_info gta01_spi_board_info[] = { ++ { ++ .modalias = "jbt6k74", ++ /* platform_data */ ++ /* controller_data */ ++ /* irq */ ++ .max_speed_hz = 10 * 1000 * 1000, ++ .bus_num = 1, ++ /* chip_select */ ++ }, ++}; ++ ++static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) ++{ ++ switch (cs) { ++ case BITBANG_CS_ACTIVE: ++ s3c2410_gpio_setpin(S3C2410_GPG3, 0); ++ break; ++ case BITBANG_CS_INACTIVE: ++ s3c2410_gpio_setpin(S3C2410_GPG3, 1); ++ break; ++ } ++} ++ ++static struct s3c2410_spigpio_info spi_gpio_cfg = { ++ .pin_clk = S3C2410_GPG7, ++ .pin_mosi = S3C2410_GPG6, ++ .pin_miso = S3C2410_GPG5, ++ .board_size = ARRAY_SIZE(gta01_spi_board_info), ++ .board_info = gta01_spi_board_info, ++ .chip_select = &spi_gpio_cs, ++}; ++ ++static struct resource s3c_spi_lcm_resource[] = { ++ [0] = { ++ .start = S3C2410_GPG3, ++ .end = S3C2410_GPG3, ++ }, ++ [1] = { ++ .start = S3C2410_GPG5, ++ .end = S3C2410_GPG5, ++ }, ++ [2] = { ++ .start = S3C2410_GPG6, ++ .end = S3C2410_GPG6, ++ }, ++ [3] = { ++ .start = S3C2410_GPG7, ++ .end = S3C2410_GPG7, ++ }, ++}; ++ ++struct platform_device s3c_device_spi_lcm = { ++ .name = "s3c24xx-spi-gpio", ++ .id = 1, ++ .num_resources = ARRAY_SIZE(s3c_spi_lcm_resource), ++ .resource = s3c_spi_lcm_resource, ++ .dev = { ++ .platform_data = &spi_gpio_cfg, ++ }, ++}; ++ ++static struct gta01bl_machinfo backlight_machinfo = { ++ .default_intensity = 1, ++ .max_intensity = 1, ++ .limit_mask = 1, ++}; ++ ++static struct resource gta01_bl_resources[] = { ++ [0] = { ++ .start = GTA01_GPIO_BACKLIGHT, ++ .end = GTA01_GPIO_BACKLIGHT, ++ }, ++}; ++ ++struct platform_device gta01_bl_dev = { ++ .name = "gta01-bl", ++ .num_resources = ARRAY_SIZE(gta01_bl_resources), ++ .resource = gta01_bl_resources, ++ .dev = { ++ .platform_data = &backlight_machinfo, ++ }, ++}; ++ ++static struct resource gta01_led_resources[] = { ++ [0] = { ++ .start = GTA01_GPIO_VIBRATOR_ON, ++ .end = GTA01_GPIO_VIBRATOR_ON, ++ }, ++}; ++ ++struct platform_device gta01_led_dev = { ++ .name = "neo1973-vibrator", ++ .num_resources = ARRAY_SIZE(gta01_led_resources), ++ .resource = gta01_led_resources, ++}; ++ ++static struct resource gta01_button_resources[] = { ++ [0] = { ++ .start = GTA01_GPIO_AUX_KEY, ++ .end = GTA01_GPIO_AUX_KEY, ++ }, ++ [1] = { ++ .start = GTA01_GPIO_HOLD_KEY, ++ .end = GTA01_GPIO_HOLD_KEY, ++ }, ++ [2] = { ++ .start = GTA01_GPIO_JACK_INSERT, ++ .end = GTA01_GPIO_JACK_INSERT, ++ }, ++}; ++ ++struct platform_device gta01_button_dev = { ++ .name = "neo1973-button", ++ .num_resources = ARRAY_SIZE(gta01_button_resources), ++ .resource = gta01_button_resources, ++}; ++ ++static struct platform_device gta01_pm_gsm_dev = { ++ .name = "neo1973-pm-gsm", ++}; ++ ++/* USB */ ++static struct s3c2410_hcd_info gta01_usb_info = { ++ .port[0] = { ++ .flags = S3C_HCDFLG_USED, ++ }, ++ .port[1] = { ++ .flags = 0, ++ }, ++}; ++ ++static void __init gta01_map_io(void) ++{ ++ s3c24xx_init_io(gta01_iodesc, ARRAY_SIZE(gta01_iodesc)); ++ s3c24xx_init_clocks(12*1000*1000); ++ s3c24xx_init_uarts(gta01_uartcfgs, ARRAY_SIZE(gta01_uartcfgs)); ++} ++ ++static irqreturn_t gta01_modem_irq(int irq, void *param) ++{ ++ printk(KERN_DEBUG "modem wakeup interrupt\n"); ++ return IRQ_HANDLED; ++} ++ ++static void __init gta01_machine_init(void) ++{ ++ int rc; ++ ++ if (system_rev == GTA01v4_SYSTEM_REV || ++ system_rev == GTA01Bv2_SYSTEM_REV || ++ system_rev == GTA01Bv3_SYSTEM_REV || ++ system_rev == GTA01Bv4_SYSTEM_REV) { ++ gta01_udc_cfg.udc_command = gta01_udc_command; ++ } ++ ++ s3c_device_usb.dev.platform_data = >a01_usb_info; ++ s3c_device_nand.dev.platform_data = >a01_nand_info; ++ ++ s3c24xx_fb_set_platdata(>a01_lcd_cfg); ++ ++ INIT_WORK(>a01_udc_vbus_drawer.work, __gta01_udc_vbus_draw); ++ s3c24xx_udc_set_platdata(>a01_udc_cfg); ++ ++ /* Set LCD_RESET / XRES to high */ ++ s3c2410_gpio_cfgpin(S3C2410_GPC6, S3C2410_GPIO_OUTPUT); ++ s3c2410_gpio_setpin(S3C2410_GPC6, 1); ++ ++ /* SPI chip select is gpio output */ ++ s3c2410_gpio_cfgpin(S3C2410_GPG3, S3C2410_GPIO_OUTPUT); ++ s3c2410_gpio_setpin(S3C2410_GPG3, 1); ++ platform_device_register(&s3c_device_spi_lcm); ++ ++ platform_device_register(>a01_bl_dev); ++ platform_device_register(>a01_button_dev); ++ platform_device_register(>a01_pm_gsm_dev); ++ ++ switch (system_rev) { ++ case GTA01v3_SYSTEM_REV: ++ case GTA01v4_SYSTEM_REV: ++ /* just use the default (GTA01_IRQ_PCF50606) */ ++ break; ++ case GTA01Bv2_SYSTEM_REV: ++ case GTA01Bv3_SYSTEM_REV: ++ /* just use the default (GTA01_IRQ_PCF50606) */ ++ gta01_led_resources[0].start = ++ gta01_led_resources[0].end = GTA01Bv2_GPIO_VIBRATOR_ON; ++ break; ++ case GTA01Bv4_SYSTEM_REV: ++ gta01_pmu_resources[0].start = ++ gta01_pmu_resources[0].end = GTA01Bv4_IRQ_PCF50606; ++ gta01_led_resources[0].start = ++ gta01_led_resources[0].end = GTA01Bv4_GPIO_VIBRATOR_ON; ++ break; ++ } ++ mangle_pmu_pdata_by_system_rev(); ++ platform_device_register(>a01_pmu_dev); ++ platform_device_register(>a01_led_dev); ++ ++ platform_add_devices(gta01_devices, ARRAY_SIZE(gta01_devices)); ++ ++ s3c2410_pm_init(); ++ ++ set_irq_type(GTA01_IRQ_MODEM, IRQT_RISING); ++ rc = request_irq(GTA01_IRQ_MODEM, gta01_modem_irq, IRQF_DISABLED, ++ "modem", NULL); ++ if (!rc) ++ printk(KERN_ERR "GTA01: can't request GSM modem wakeup IRQ\n"); ++ enable_irq_wake(GTA01_IRQ_MODEM); ++} ++ ++MACHINE_START(NEO1973_GTA01, "GTA01") ++ .phys_io = S3C2410_PA_UART, ++ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, ++ .boot_params = S3C2410_SDRAM_PA + 0x100, ++ .map_io = gta01_map_io, ++ .init_irq = s3c24xx_init_irq, ++ .init_machine = gta01_machine_init, ++ .timer = &s3c24xx_timer, ++MACHINE_END +diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig +index b66fb3c..7ee4b82 100644 +--- a/arch/arm/plat-s3c24xx/Kconfig ++++ b/arch/arm/plat-s3c24xx/Kconfig +@@ -46,4 +46,9 @@ config MACH_SMDK + help + Common machine code for SMDK2410 and SMDK2440 + ++config MACH_NEO1973 ++ bool ++ help ++ Common machine code for Neo1973 hardware ++ + endif +diff --git a/include/asm-arm/arch-s3c2410/gta01.h b/include/asm-arm/arch-s3c2410/gta01.h +new file mode 100644 +index 0000000..1cc2099 +--- /dev/null ++++ b/include/asm-arm/arch-s3c2410/gta01.h +@@ -0,0 +1,70 @@ ++#ifndef _GTA01_H ++#define _GTA01_H ++ ++#include ++#include ++ ++/* Different hardware revisions, passed in ATAG_REVISION by u-boot */ ++#define GTA01v3_SYSTEM_REV 0x00000130 ++#define GTA01v4_SYSTEM_REV 0x00000140 ++#define GTA01Bv2_SYSTEM_REV 0x00000220 ++#define GTA01Bv3_SYSTEM_REV 0x00000230 ++#define GTA01Bv4_SYSTEM_REV 0x00000240 ++ ++/* Backlight */ ++struct gta01bl_machinfo { ++ unsigned int default_intensity; ++ unsigned int max_intensity; ++ unsigned int limit_mask; ++}; ++ ++/* Definitions common to all revisions */ ++#define GTA01_GPIO_BACKLIGHT S3C2410_GPB0 ++#define GTA01_GPIO_GPS_PWRON S3C2410_GPB1 ++#define GTA01_GPIO_MODEM_RST S3C2410_GPB6 ++#define GTA01_GPIO_MODEM_ON S3C2410_GPB7 ++#define GTA01_GPIO_LCD_RESET S3C2410_GPC6 ++#define GTA01_GPIO_PMU_IRQ S3C2410_GPG8 ++#define GTA01_GPIO_JACK_INSERT S3C2410_GPF4 ++#define GTA01_GPIO_nSD_DETECT S3C2410_GPF5 ++#define GTA01_GPIO_AUX_KEY S3C2410_GPF6 ++#define GTA01_GPIO_HOLD_KEY S3C2410_GPF7 ++#define GTA01_GPIO_VIBRATOR_ON S3C2410_GPG11 ++ ++#define GTA01_IRQ_MODEM IRQ_EINT1 ++#define GTA01_IRQ_JACK_INSERT IRQ_EINT4 ++#define GTA01_IRQ_nSD_DETECT IRQ_EINT5 ++#define GTA01_IRQ_AUX_KEY IRQ_EINT6 ++#define GTA01_IRQ_PCF50606 IRQ_EINT16 ++ ++/* GTA01v3 */ ++#define GTA01v3_GPIO_nGSM_EN S3C2410_GPG9 ++ ++/* GTA01v4 */ ++#define GTA01_GPIO_MODEM_DNLOAD S3C2410_GPG0 ++ ++/* GTA01Bv2 */ ++#define GTA01Bv2_GPIO_nGSM_EN S3C2410_GPF2 ++#define GTA01Bv2_GPIO_VIBRATOR_ON S3C2410_GPB10 ++ ++/* GTA01Bv3 */ ++#define GTA01_GPIO_GPS_EN_3V3 S3C2410_GPG9 ++ ++#define GTA01_GPIO_SDMMC_ON S3C2410_GPB2 ++#define GTA01_GPIO_BT_EN S3C2410_GPB5 ++#define GTA01_GPIO_AB_DETECT S3C2410_GPB8 ++#define GTA01_GPIO_USB_PULLUP S3C2410_GPB9 ++#define GTA01_GPIO_USB_ATTACH S3C2410_GPB10 ++ ++#define GTA01_GPIO_GPS_EN_2V8 S3C2410_GPG9 ++#define GTA01_GPIO_GPS_EN_3V S3C2410_GPG10 ++#define GTA01_GPIO_GPS_RESET S3C2410_GPC0 ++ ++/* GTA01Bv4 */ ++#define GTA01Bv4_GPIO_nNAND_WP S3C2410_GPA16 ++#define GTA01Bv4_GPIO_VIBRATOR_ON S3C2410_GPB3 ++#define GTA01Bv4_GPIO_PMU_IRQ S3C2410_GPG1 ++ ++#define GTA01Bv4_IRQ_PCF50606 IRQ_EINT9 ++ ++#endif /* _GTA01_H */ +-- +1.5.6.3 + -- cgit v1.2.3