From 82661f4b0ebe2c4173d178e94d529505458f8e0e Mon Sep 17 00:00:00 2001 From: juhosg Date: Tue, 18 Dec 2012 17:54:02 +0000 Subject: s3c2442: R.I.P. It is broken and it is not maintained by anyone since long time. Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34767 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../files-2.6.30/drivers/mfd/glamo/glamo-mci.c | 987 --------------------- 1 file changed, 987 deletions(-) delete mode 100644 target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c (limited to 'target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c') diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c deleted file mode 100644 index b728c8745..000000000 --- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c +++ /dev/null @@ -1,987 +0,0 @@ -/* - * linux/drivers/mmc/host/glamo-mmc.c - Glamo MMC driver - * - * Copyright (C) 2007 Openmoko, Inc, Andy Green - * Based on S3C MMC driver that was: - * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "glamo-core.h" -#include "glamo-regs.h" - -#define DRIVER_NAME "glamo-mci" - -struct glamo_mci_host { - struct glamo_mmc_platform_data *pdata; - struct platform_device *pdev; - struct glamo_core *core; - struct mmc_host *mmc; - struct resource *mmio_mem; - struct resource *data_mem; - void __iomem *mmio_base; - u16 __iomem *data_base; - - struct regulator *regulator; - struct mmc_request *mrq; - - unsigned int clk_rate; - - unsigned short vdd; - char power_mode; - - unsigned char request_counter; - - struct timer_list disable_timer; - - struct work_struct irq_work; - struct work_struct read_work; - - unsigned clk_enabled : 1; - -}; - -static void glamo_mci_send_request(struct mmc_host *mmc, struct mmc_request* mrq); -static void glamo_mci_send_command(struct glamo_mci_host *host, - struct mmc_command *cmd); - -/* - * Max SD clock rate - * - * held at /(3 + 1) due to concerns of 100R recommended series resistor - * allows 16MHz @ 4-bit --> 8MBytes/sec raw - * - * you can override this on kernel commandline using - * - * glamo_mci.sd_max_clk=10000000 - * - * for example - */ - -static int sd_max_clk = 21000000; -module_param(sd_max_clk, int, 0644); - -/* - * Slow SD clock rate - * - * you can override this on kernel commandline using - * - * glamo_mci.sd_slow_ratio=8 - * - * for example - * - * platform callback is used to decide effective clock rate, if not - * defined then max is used, if defined and returns nonzero, rate is - * divided by this factor - */ - -static int sd_slow_ratio = 8; -module_param(sd_slow_ratio, int, 0644); - -/* - * Post-power SD clock rate - * - * you can override this on kernel commandline using - * - * glamo_mci.sd_post_power_clock=1000000 - * - * for example - * - * After changing power to card, clock is held at this rate until first bulk - * transfer completes - */ - -static int sd_post_power_clock = 1000000; -module_param(sd_post_power_clock, int, 0644); - - -static inline void glamo_reg_write(struct glamo_mci_host *glamo, - u_int16_t reg, u_int16_t val) -{ - writew(val, glamo->mmio_base + reg); -} - -static inline u_int16_t glamo_reg_read(struct glamo_mci_host *glamo, - u_int16_t reg) -{ - return readw(glamo->mmio_base + reg); -} - -static void glamo_reg_set_bit_mask(struct glamo_mci_host *glamo, - u_int16_t reg, u_int16_t mask, - u_int16_t val) -{ - u_int16_t tmp; - - val &= mask; - - tmp = glamo_reg_read(glamo, reg); - tmp &= ~mask; - tmp |= val; - glamo_reg_write(glamo, reg, tmp); -} - -static void glamo_mci_clock_disable(struct glamo_mci_host *host) { - if (host->clk_enabled) { - glamo_engine_div_disable(host->core, GLAMO_ENGINE_MMC); - host->clk_enabled = 0; - } -} - -static void glamo_mci_clock_enable(struct glamo_mci_host *host) { - del_timer_sync(&host->disable_timer); - - if (!host->clk_enabled) { - glamo_engine_div_enable(host->core, GLAMO_ENGINE_MMC); - host->clk_enabled = 1; - } -} - -static void glamo_mci_disable_timer(unsigned long data) { - struct glamo_mci_host *host = (struct glamo_mci_host *)data; - glamo_mci_clock_disable(host); -} - - -static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data) -{ - struct scatterlist *sg; - u16 __iomem *from_ptr = host->data_base; - void *sg_pointer; - - dev_dbg(&host->pdev->dev, "pio_read():\n"); - for (sg = data->sg; sg; sg = sg_next(sg)) { - sg_pointer = page_address(sg_page(sg)) + sg->offset; - - - memcpy(sg_pointer, from_ptr, sg->length); - from_ptr += sg->length >> 1; - - data->bytes_xfered += sg->length; - } - - dev_dbg(&host->pdev->dev, "pio_read(): " - "complete (no more data).\n"); -} - -static void do_pio_write(struct glamo_mci_host *host, struct mmc_data *data) -{ - struct scatterlist *sg; - u16 __iomem *to_ptr = host->data_base; - void *sg_pointer; - - dev_dbg(&host->pdev->dev, "pio_write():\n"); - for (sg = data->sg; sg; sg = sg_next(sg)) { - sg_pointer = page_address(sg_page(sg)) + sg->offset; - - data->bytes_xfered += sg->length; - - memcpy(to_ptr, sg_pointer, sg->length); - to_ptr += sg->length >> 1; - } - - dev_dbg(&host->pdev->dev, "pio_write(): complete\n"); -} - -static int glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq) -{ - int real_rate = 0; - - if (freq) { - glamo_mci_clock_enable(host); - real_rate = glamo_engine_reclock(host->core, GLAMO_ENGINE_MMC, freq); - } else { - glamo_mci_clock_disable(host); - } - - return real_rate; -} - -static void glamo_mci_request_done(struct glamo_mci_host *host, struct -mmc_request *mrq) { - mod_timer(&host->disable_timer, jiffies + HZ / 16); - mmc_request_done(host->mmc, mrq); -} - - -static void glamo_mci_irq_worker(struct work_struct *work) -{ - struct glamo_mci_host *host = container_of(work, struct glamo_mci_host, - irq_work); - struct mmc_command *cmd; - uint16_t status; - if (!host->mrq || !host->mrq->cmd) - return; - - cmd = host->mrq->cmd; - -#if 0 - if (cmd->data->flags & MMC_DATA_READ) { - return; - } -#endif - - status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); - dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status); - - /* we ignore a data timeout report if we are also told the data came */ - if (status & GLAMO_STAT1_MMC_RB_DRDY) - status &= ~GLAMO_STAT1_MMC_DTOUT; - - if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT)) - cmd->error = -ETIMEDOUT; - if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) { - cmd->error = -EILSEQ; - } - if (cmd->error) { - dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status); - goto done; - } - - /* issue STOP if we have been given one to use */ - if (host->mrq->stop) { - glamo_mci_send_command(host, host->mrq->stop); - } - - if (cmd->data->flags & MMC_DATA_READ) - do_pio_read(host, cmd->data); - -done: - host->mrq = NULL; - glamo_mci_request_done(host, cmd->mrq); -} - -static void glamo_mci_read_worker(struct work_struct *work) -{ - struct glamo_mci_host *host = container_of(work, struct glamo_mci_host, - read_work); - struct mmc_command *cmd; - uint16_t status; - uint16_t blocks_ready; - size_t data_read = 0; - size_t data_ready; - struct scatterlist *sg; - u16 __iomem *from_ptr = host->data_base; - void *sg_pointer; - - - cmd = host->mrq->cmd; - sg = cmd->data->sg; - do { - status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); - - if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT)) - cmd->error = -ETIMEDOUT; - if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) - cmd->error = -EILSEQ; - if (cmd->error) { - dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status); - goto done; - } - - blocks_ready = glamo_reg_read(host, GLAMO_REG_MMC_RB_BLKCNT); - data_ready = blocks_ready * cmd->data->blksz; - - if (data_ready == data_read) - yield(); - - while(sg && data_read + sg->length <= data_ready) { - sg_pointer = page_address(sg_page(sg)) + sg->offset; - memcpy(sg_pointer, from_ptr, sg->length); - from_ptr += sg->length >> 1; - - data_read += sg->length; - sg = sg_next(sg); - } - - } while(sg); - cmd->data->bytes_xfered = data_read; - - do { - status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); - } while (!(status & GLAMO_STAT1_MMC_IDLE)); - - if (host->mrq->stop) - glamo_mci_send_command(host, host->mrq->stop); - - do { - status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); - } while (!(status & GLAMO_STAT1_MMC_IDLE)); -done: - host->mrq = NULL; - glamo_mci_request_done(host, cmd->mrq); -} - -static irqreturn_t glamo_mci_irq(int irq, void *devid) -{ - struct glamo_mci_host *host = (struct glamo_mci_host*)devid; - schedule_work(&host->irq_work); - - return IRQ_HANDLED; -} - -static void glamo_mci_send_command(struct glamo_mci_host *host, - struct mmc_command *cmd) -{ - u8 u8a[6]; - u16 fire = 0; - unsigned int timeout = 1000000; - u16 * reg_resp = (u16 *)(host->mmio_base + GLAMO_REG_MMC_CMD_RSP1); - u16 status; - int triggers_int = 1; - - /* if we can't do it, reject as busy */ - if (!glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1) & - GLAMO_STAT1_MMC_IDLE) { - cmd->error = -EBUSY; - return; - } - - /* create an array in wire order for CRC computation */ - u8a[0] = 0x40 | (cmd->opcode & 0x3f); - u8a[1] = (u8)(cmd->arg >> 24); - u8a[2] = (u8)(cmd->arg >> 16); - u8a[3] = (u8)(cmd->arg >> 8); - u8a[4] = (u8)cmd->arg; - u8a[5] = (crc7(0, u8a, 5) << 1) | 0x01; /* crc7 on first 5 bytes of packet */ - - /* issue the wire-order array including CRC in register order */ - glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG1, ((u8a[4] << 8) | u8a[5])); - glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG2, ((u8a[2] << 8) | u8a[3])); - glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG3, ((u8a[0] << 8) | u8a[1])); - - /* command index toggle */ - fire |= (host->request_counter & 1) << 12; - - /* set type of command */ - switch (mmc_cmd_type(cmd)) { - case MMC_CMD_BC: - fire |= GLAMO_FIRE_MMC_CMDT_BNR; - break; - case MMC_CMD_BCR: - fire |= GLAMO_FIRE_MMC_CMDT_BR; - break; - case MMC_CMD_AC: - fire |= GLAMO_FIRE_MMC_CMDT_AND; - break; - case MMC_CMD_ADTC: - fire |= GLAMO_FIRE_MMC_CMDT_AD; - break; - } - /* - * if it expects a response, set the type expected - * - * R1, Length : 48bit, Normal response - * R1b, Length : 48bit, same R1, but added card busy status - * R2, Length : 136bit (really 128 bits with CRC snipped) - * R3, Length : 48bit (OCR register value) - * R4, Length : 48bit, SDIO_OP_CONDITION, Reverse SDIO Card - * R5, Length : 48bit, IO_RW_DIRECTION, Reverse SDIO Card - * R6, Length : 48bit (RCA register) - * R7, Length : 48bit (interface condition, VHS(voltage supplied), - * check pattern, CRC7) - */ - switch (mmc_resp_type(cmd)) { - case MMC_RSP_R1: /* same index as R6 and R7 */ - fire |= GLAMO_FIRE_MMC_RSPT_R1; - break; - case MMC_RSP_R1B: - fire |= GLAMO_FIRE_MMC_RSPT_R1b; - break; - case MMC_RSP_R2: - fire |= GLAMO_FIRE_MMC_RSPT_R2; - break; - case MMC_RSP_R3: - fire |= GLAMO_FIRE_MMC_RSPT_R3; - break; - /* R4 and R5 supported by chip not defined in linux/mmc/core.h (sdio) */ - } - /* - * From the command index, set up the command class in the host ctrllr - * - * missing guys present on chip but couldn't figure out how to use yet: - * 0x0 "stream read" - * 0x9 "cancel running command" - */ - switch (cmd->opcode) { - case MMC_READ_SINGLE_BLOCK: - fire |= GLAMO_FIRE_MMC_CC_SBR; /* single block read */ - break; - case MMC_SWITCH: /* 64 byte payload */ - case SD_APP_SEND_SCR: - case MMC_READ_MULTIPLE_BLOCK: - /* we will get an interrupt off this */ - if (!cmd->mrq->stop) - /* multiblock no stop */ - fire |= GLAMO_FIRE_MMC_CC_MBRNS; - else - /* multiblock with stop */ - fire |= GLAMO_FIRE_MMC_CC_MBRS; - break; - case MMC_WRITE_BLOCK: - fire |= GLAMO_FIRE_MMC_CC_SBW; /* single block write */ - break; - case MMC_WRITE_MULTIPLE_BLOCK: - if (cmd->mrq->stop) - /* multiblock with stop */ - fire |= GLAMO_FIRE_MMC_CC_MBWS; - else - /* multiblock NO stop-- 'RESERVED'? */ - fire |= GLAMO_FIRE_MMC_CC_MBWNS; - break; - case MMC_STOP_TRANSMISSION: - fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */ - triggers_int = 0; - break; - default: - fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */ - triggers_int = 0; - break; - } - - if (cmd->data) - host->mrq = cmd->mrq; - - /* always largest timeout */ - glamo_reg_write(host, GLAMO_REG_MMC_TIMEOUT, 0xfff); - - /* Generate interrupt on txfer */ - glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, 0xff36, - 0x0800 | - GLAMO_BASIC_MMC_NO_CLK_RD_WAIT | - GLAMO_BASIC_MMC_EN_COMPL_INT | - GLAMO_BASIC_MMC_EN_DATA_PUPS | - GLAMO_BASIC_MMC_EN_CMD_PUP); - - /* send the command out on the wire */ - /* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */ - glamo_reg_write(host, GLAMO_REG_MMC_CMD_FIRE, fire); - - /* we are deselecting card? because it isn't going to ack then... */ - if ((cmd->opcode == 7) && (cmd->arg == 0)) - return; - - /* - * we must spin until response is ready or timed out - * -- we don't get interrupts unless there is a bulk rx - */ - do - status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); - while (((((status >> 15) & 1) != (host->request_counter & 1)) || - (!(status & (GLAMO_STAT1_MMC_RB_RRDY | - GLAMO_STAT1_MMC_RTOUT | - GLAMO_STAT1_MMC_DTOUT | - GLAMO_STAT1_MMC_BWERR | - GLAMO_STAT1_MMC_BRERR)))) && (timeout--)); - - if ((status & (GLAMO_STAT1_MMC_RTOUT | - GLAMO_STAT1_MMC_DTOUT)) || - (timeout == 0)) { - cmd->error = -ETIMEDOUT; - } else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) { - cmd->error = -EILSEQ; - } - - if (cmd->flags & MMC_RSP_PRESENT) { - if (cmd->flags & MMC_RSP_136) { - cmd->resp[3] = readw(®_resp[0]) | - (readw(®_resp[1]) << 16); - cmd->resp[2] = readw(®_resp[2]) | - (readw(®_resp[3]) << 16); - cmd->resp[1] = readw(®_resp[4]) | - (readw(®_resp[5]) << 16); - cmd->resp[0] = readw(®_resp[6]) | - (readw(®_resp[7]) << 16); - } else { - cmd->resp[0] = (readw(®_resp[0]) >> 8) | - (readw(®_resp[1]) << 8) | - ((readw(®_resp[2])) << 24); - } - } - -#if 0 - /* We'll only get an interrupt when all data has been transfered. - By starting to copy data when it's avaiable we can increase throughput by - up to 30%. */ - if (cmd->data && (cmd->data->flags & MMC_DATA_READ)) - schedule_work(&host->read_work); -#endif - -} - -static int glamo_mci_prepare_pio(struct glamo_mci_host *host, - struct mmc_data *data) -{ - /* set up the block info */ - glamo_reg_write(host, GLAMO_REG_MMC_DATBLKLEN, data->blksz); - glamo_reg_write(host, GLAMO_REG_MMC_DATBLKCNT, data->blocks); - - data->bytes_xfered = 0; - - /* if write, prep the write into the shared RAM before the command */ - if (data->flags & MMC_DATA_WRITE) { - do_pio_write(host, data); - } - - dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n", - data->blksz, data->blocks); - return 0; -} - -static int glamo_mci_irq_poll(struct glamo_mci_host *host, - struct mmc_command *cmd) -{ - int timeout = 1000000; - /* - * if the glamo INT# line isn't wired (*cough* it can happen) - * I'm afraid we have to spin on the IRQ status bit and "be - * our own INT# line" - */ - /* - * we have faith we will get an "interrupt"... - * but something insane like suspend problems can mean - * we spin here forever, so we timeout after a LONG time - */ - while ((!(readw(host->core->base + - GLAMO_REG_IRQ_STATUS) & GLAMO_IRQ_MMC)) && - (timeout--)); - - if (timeout < 0) { - if (cmd->data->error) - cmd->data->error = -ETIMEDOUT; - dev_err(&host->pdev->dev, "Payload timeout\n"); - return -ETIMEDOUT; - } - /* ack this interrupt source */ - writew(GLAMO_IRQ_MMC, host->core->base + - GLAMO_REG_IRQ_CLEAR); - - /* yay we are an interrupt controller! -- call the ISR - * it will stop clock to card - */ - glamo_mci_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host); - - return 0; -} - -static void glamo_mci_send_request(struct mmc_host *mmc, struct mmc_request *mrq) -{ - struct glamo_mci_host *host = mmc_priv(mmc); - struct mmc_command *cmd = mrq->cmd; - - glamo_mci_clock_enable(host); - host->request_counter++; - if (cmd->data) { - if(glamo_mci_prepare_pio(host, cmd->data)) { - cmd->error = -EIO; - cmd->data->error = -EIO; - goto done; - } - } - - dev_dbg(&host->pdev->dev,"cmd 0x%x, " - "arg 0x%x data=%p mrq->stop=%p flags 0x%x\n", - cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop, - cmd->flags); - - glamo_mci_send_command(host, cmd); - - /* - * if we don't have bulk data to take care of, we're done - */ - if (!cmd->data || cmd->error) - goto done; - - - if (!host->core->irq_works) { - if (glamo_mci_irq_poll(host, mrq->cmd)) - goto done; - } - - /* - * Otherwise can can use the interrupt as async completion -- - * if there is read data coming, or we wait for write data to complete, - * exit without mmc_request_done() as the payload interrupt - * will service it - */ - dev_dbg(&host->pdev->dev, "Waiting for payload data\n"); - return; -done: - glamo_mci_request_done(host, mrq); -} - -static void glamo_mci_set_power_mode(struct glamo_mci_host *host, - unsigned char power_mode) { - int ret; - - if (power_mode == host->power_mode) - return; - - switch(power_mode) { - case MMC_POWER_UP: - if (host->power_mode == MMC_POWER_OFF) { - ret = regulator_enable(host->regulator); - if (ret) - dev_err(&host->pdev->dev, "Failed to enable regulator: %d\n", ret); - } - break; - case MMC_POWER_ON: - break; - case MMC_POWER_OFF: - default: - glamo_engine_disable(host->core, - GLAMO_ENGINE_MMC); - - ret = regulator_disable(host->regulator); - if (ret) - dev_warn(&host->pdev->dev, "Failed to disable regulator: %d\n", ret); - break; - } - host->power_mode = power_mode; -} - -static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -{ - struct glamo_mci_host *host = mmc_priv(mmc); - int bus_width = 0; - int rate; - int sd_drive; - int ret; - - /* Set power */ - glamo_mci_set_power_mode(host, ios->power_mode); - - if (host->vdd != ios->vdd) { - ret = mmc_regulator_set_ocr(host->regulator, ios->vdd); - if (ret) - dev_err(&host->pdev->dev, "Failed to set regulator voltage: %d\n", ret); - else - host->vdd = ios->vdd; - } - rate = glamo_mci_set_card_clock(host, ios->clock); - - if ((ios->power_mode == MMC_POWER_ON) || - (ios->power_mode == MMC_POWER_UP)) { - dev_info(&host->pdev->dev, - "powered (vdd = %hu) clk: %dkHz div=%hu (req: %ukHz). " - "Bus width=%d\n", ios->vdd, - rate / 1000, 0, - ios->clock / 1000, (int)ios->bus_width); - } else { - dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n"); - } - - /* set bus width */ - if (ios->bus_width == MMC_BUS_WIDTH_4) - bus_width = GLAMO_BASIC_MMC_EN_4BIT_DATA; - - sd_drive = (rate * 4) / host->clk_rate; - if (sd_drive > 3) - sd_drive = 3; - - glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, - GLAMO_BASIC_MMC_EN_4BIT_DATA | 0xb0, - bus_width | sd_drive << 6); -} - - -/* - * no physical write protect supported by us - */ -static int glamo_mci_get_ro(struct mmc_host *mmc) -{ - return 0; -} - -static struct mmc_host_ops glamo_mci_ops = { - .request = glamo_mci_send_request, - .set_ios = glamo_mci_set_ios, - .get_ro = glamo_mci_get_ro, -}; - -static int glamo_mci_probe(struct platform_device *pdev) -{ - struct mmc_host *mmc; - struct glamo_mci_host *host; - struct glamo_core *core = dev_get_drvdata(pdev->dev.parent); - int ret; - - dev_info(&pdev->dev, "glamo_mci driver (C)2007 Openmoko, Inc\n"); - - mmc = mmc_alloc_host(sizeof(struct glamo_mci_host), &pdev->dev); - if (!mmc) { - ret = -ENOMEM; - goto probe_out; - } - - host = mmc_priv(mmc); - host->mmc = mmc; - host->pdev = pdev; - if (core->pdata) - host->pdata = core->pdata->mmc_data; - host->power_mode = MMC_POWER_OFF; - host->clk_enabled = 0; - host->core = core; - - INIT_WORK(&host->irq_work, glamo_mci_irq_worker); - INIT_WORK(&host->read_work, glamo_mci_read_worker); - - host->regulator = regulator_get(pdev->dev.parent, "SD_3V3"); - if (!host->regulator) { - dev_err(&pdev->dev, "Cannot proceed without regulator.\n"); - ret = -ENODEV; - goto probe_free_host; - } - - host->mmio_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!host->mmio_mem) { - dev_err(&pdev->dev, - "failed to get io memory region resouce.\n"); - ret = -ENOENT; - goto probe_regulator_put; - } - - host->mmio_mem = request_mem_region(host->mmio_mem->start, - resource_size(host->mmio_mem), - pdev->name); - - if (!host->mmio_mem) { - dev_err(&pdev->dev, "failed to request io memory region.\n"); - ret = -ENOENT; - goto probe_regulator_put; - } - - host->mmio_base = ioremap(host->mmio_mem->start, - resource_size(host->mmio_mem)); - if (!host->mmio_base) { - dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); - ret = -EINVAL; - goto probe_free_mem_region_mmio; - } - - - /* Get ahold of our data buffer we use for data in and out on MMC */ - host->data_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!host->data_mem) { - dev_err(&pdev->dev, - "failed to get io memory region resource.\n"); - ret = -ENOENT; - goto probe_iounmap_mmio; - } - - host->data_mem = request_mem_region(host->data_mem->start, - resource_size(host->data_mem), - pdev->name); - - if (!host->data_mem) { - dev_err(&pdev->dev, "failed to request io memory region.\n"); - ret = -ENOENT; - goto probe_iounmap_mmio; - } - host->data_base = ioremap(host->data_mem->start, - resource_size(host->data_mem)); - - if (host->data_base == 0) { - dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); - ret = -EINVAL; - goto probe_free_mem_region_data; - } - - ret = request_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), glamo_mci_irq, IRQF_SHARED, - pdev->name, host); - if (ret) { - dev_err(&pdev->dev, "failed to register irq.\n"); - goto probe_iounmap_data; - } - - - host->vdd = 0; - host->clk_rate = glamo_pll_rate(host->core, GLAMO_PLL1); - - /* explain our host controller capabilities */ - mmc->ops = &glamo_mci_ops; - mmc->ocr_avail = mmc_regulator_get_ocrmask(host->regulator); - mmc->caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_SD_HIGHSPEED; - mmc->f_min = host->clk_rate / 256; - mmc->f_max = sd_max_clk; - - mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */ - mmc->max_blk_size = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */ - mmc->max_req_size = resource_size(host->data_mem); - mmc->max_seg_size = mmc->max_req_size; - mmc->max_phys_segs = 128; - mmc->max_hw_segs = 128; - - if (mmc->ocr_avail < 0) { - dev_warn(&pdev->dev, "Failed to get ocr list for regulator: %d.\n", - mmc->ocr_avail); - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - } - - platform_set_drvdata(pdev, mmc); - - glamo_engine_enable(host->core, GLAMO_ENGINE_MMC); - glamo_engine_reset(host->core, GLAMO_ENGINE_MMC); - - glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1, - (u16)(host->data_mem->start)); - glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2, - (u16)(host->data_mem->start >> 16)); - - glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1, - (u16)(host->data_mem->start)); - glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2, - (u16)(host->data_mem->start >> 16)); - - setup_timer(&host->disable_timer, glamo_mci_disable_timer, - (unsigned long)host); - - if ((ret = mmc_add_host(mmc))) { - dev_err(&pdev->dev, "failed to add mmc host.\n"); - goto probe_freeirq; - } - - dev_info(&pdev->dev,"initialisation done.\n"); - return 0; - -probe_freeirq: - free_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host); -probe_iounmap_data: - iounmap(host->data_base); -probe_free_mem_region_data: - release_mem_region(host->data_mem->start, resource_size(host->data_mem)); -probe_iounmap_mmio: - iounmap(host->mmio_base); -probe_free_mem_region_mmio: - release_mem_region(host->mmio_mem->start, resource_size(host->mmio_mem)); -probe_regulator_put: - regulator_put(host->regulator); -probe_free_host: - mmc_free_host(mmc); -probe_out: - return ret; -} - -static int glamo_mci_remove(struct platform_device *pdev) -{ - struct mmc_host *mmc = platform_get_drvdata(pdev); - struct glamo_mci_host *host = mmc_priv(mmc); - - free_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host); - - mmc_remove_host(mmc); - iounmap(host->mmio_base); - iounmap(host->data_base); - release_mem_region(host->mmio_mem->start, resource_size(host->mmio_mem)); - release_mem_region(host->data_mem->start, resource_size(host->data_mem)); - - regulator_put(host->regulator); - - mmc_free_host(mmc); - - glamo_engine_disable(host->core, GLAMO_ENGINE_MMC); - return 0; -} - - -#ifdef CONFIG_PM - -static int glamo_mci_suspend(struct device *dev) -{ - struct mmc_host *mmc = dev_get_drvdata(dev); - struct glamo_mci_host *host = mmc_priv(mmc); - int ret; - - cancel_work_sync(&host->irq_work); - - ret = mmc_suspend_host(mmc, PMSG_SUSPEND); - glamo_mci_clock_enable(host); - - return ret; -} - -static int glamo_mci_resume(struct device *dev) -{ - struct mmc_host *mmc = dev_get_drvdata(dev); - struct glamo_mci_host *host = mmc_priv(mmc); - int ret; - - glamo_engine_enable(host->core, GLAMO_ENGINE_MMC); - glamo_engine_reset(host->core, GLAMO_ENGINE_MMC); - - glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1, - (u16)(host->data_mem->start)); - glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2, - (u16)(host->data_mem->start >> 16)); - - glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1, - (u16)(host->data_mem->start)); - glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2, - (u16)(host->data_mem->start >> 16)); - mdelay(5); - - ret = mmc_resume_host(host->mmc); -/* glamo_mci_clock_disable(host);*/ - - return 0; -} - -static struct dev_pm_ops glamo_mci_pm_ops = { - .suspend = glamo_mci_suspend, - .resume = glamo_mci_resume, -}; -#define GLAMO_MCI_PM_OPS (&glamo_mci_pm_ops) - -#else /* CONFIG_PM */ -#define GLAMO_MCI_PM_OPS NULL -#endif /* CONFIG_PM */ - - -static struct platform_driver glamo_mci_driver = -{ - .probe = glamo_mci_probe, - .remove = glamo_mci_remove, - .driver = { - .name = "glamo-mci", - .owner = THIS_MODULE, - .pm = GLAMO_MCI_PM_OPS, - }, -}; - -static int __init glamo_mci_init(void) -{ - platform_driver_register(&glamo_mci_driver); - return 0; -} - -static void __exit glamo_mci_exit(void) -{ - platform_driver_unregister(&glamo_mci_driver); -} - -module_init(glamo_mci_init); -module_exit(glamo_mci_exit); - -MODULE_DESCRIPTION("Glamo MMC/SD Card Interface driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Andy Green "); -- cgit v1.2.3