From 5deb3317cb51ac52de922bb55f8492624018906d Mon Sep 17 00:00:00 2001 From: Roman Yeryomin Date: Thu, 13 Sep 2012 00:40:35 +0300 Subject: Add realtek target files Signed-off-by: Roman Yeryomin --- .../files/drivers/usb/gadget_cathy/pxa2xx_udc.c | 2731 ++++++++++++++++++++ 1 file changed, 2731 insertions(+) create mode 100644 target/linux/realtek/files/drivers/usb/gadget_cathy/pxa2xx_udc.c (limited to 'target/linux/realtek/files/drivers/usb/gadget_cathy/pxa2xx_udc.c') diff --git a/target/linux/realtek/files/drivers/usb/gadget_cathy/pxa2xx_udc.c b/target/linux/realtek/files/drivers/usb/gadget_cathy/pxa2xx_udc.c new file mode 100644 index 000000000..671c24bc6 --- /dev/null +++ b/target/linux/realtek/files/drivers/usb/gadget_cathy/pxa2xx_udc.c @@ -0,0 +1,2731 @@ +/* + * linux/drivers/usb/gadget/pxa2xx_udc.c + * Intel PXA25x and IXP4xx on-chip full speed USB device controllers + * + * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker) + * Copyright (C) 2003 Robert Schwebel, Pengutronix + * Copyright (C) 2003 Benedikt Spranger, Pengutronix + * Copyright (C) 2003 David Brownell + * Copyright (C) 2003 Joshua Wise + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#undef DEBUG +// #define VERBOSE DBG_VERBOSE + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_ARCH_PXA +#include +#endif + +#include +#include + +#include + + +/* + * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x + * series processors. The UDC for the IXP 4xx series is very similar. + * There are fifteen endpoints, in addition to ep0. + * + * Such controller drivers work with a gadget driver. The gadget driver + * returns descriptors, implements configuration and data protocols used + * by the host to interact with this device, and allocates endpoints to + * the different protocol interfaces. The controller driver virtualizes + * usb hardware so that the gadget drivers will be more portable. + * + * This UDC hardware wants to implement a bit too much USB protocol, so + * it constrains the sorts of USB configuration change events that work. + * The errata for these chips are misleading; some "fixed" bugs from + * pxa250 a0/a1 b0/b1/b2 sure act like they're still there. + */ + +#define DRIVER_VERSION "4-May-2005" +#define DRIVER_DESC "PXA 25x USB Device Controller driver" + + +static const char driver_name [] = "pxa2xx_udc"; + +static const char ep0name [] = "ep0"; + + +// #define USE_DMA +// #define USE_OUT_DMA +// #define DISABLE_TEST_MODE + +#ifdef CONFIG_ARCH_IXP4XX +#undef USE_DMA + +/* cpu-specific register addresses are compiled in to this code */ +#ifdef CONFIG_ARCH_PXA +#error "Can't configure both IXP and PXA" +#endif + +#endif + +#include "pxa2xx_udc.h" + + +#ifdef USE_DMA +static int use_dma = 1; +module_param(use_dma, bool, 0); +MODULE_PARM_DESC (use_dma, "true to use dma"); + +static void dma_nodesc_handler (int dmach, void *_ep); +static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req); + +#ifdef USE_OUT_DMA +#define DMASTR " (dma support)" +#else +#define DMASTR " (dma in)" +#endif + +#else /* !USE_DMA */ +#define DMASTR " (pio only)" +#undef USE_OUT_DMA +#endif + +#ifdef CONFIG_USB_PXA2XX_SMALL +#define SIZE_STR " (small)" +#else +#define SIZE_STR "" +#endif + +#ifdef DISABLE_TEST_MODE +/* (mode == 0) == no undocumented chip tweaks + * (mode & 1) == double buffer bulk IN + * (mode & 2) == double buffer bulk OUT + * ... so mode = 3 (or 7, 15, etc) does it for both + */ +static ushort fifo_mode = 0; +module_param(fifo_mode, ushort, 0); +MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode"); +#endif + +/* --------------------------------------------------------------------------- + * endpoint related parts of the api to the usb controller hardware, + * used by gadget driver; and the inner talker-to-hardware core. + * --------------------------------------------------------------------------- + */ + +static void pxa2xx_ep_fifo_flush (struct usb_ep *ep); +static void nuke (struct pxa2xx_ep *, int status); + +/* one GPIO should be used to detect VBUS from the host */ +static int is_vbus_present(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + + if (mach->gpio_vbus) + return pxa_gpio_get(mach->gpio_vbus); + if (mach->udc_is_connected) + return mach->udc_is_connected(); + return 1; +} + +/* one GPIO should control a D+ pullup, so host sees this device (or not) */ +static void pullup_off(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + + if (mach->gpio_pullup) + pxa_gpio_set(mach->gpio_pullup, 0); + else if (mach->udc_command) + mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); +} + +static void pullup_on(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + + if (mach->gpio_pullup) + pxa_gpio_set(mach->gpio_pullup, 1); + else if (mach->udc_command) + mach->udc_command(PXA2XX_UDC_CMD_CONNECT); +} + +static void pio_irq_enable(int bEndpointAddress) +{ + bEndpointAddress &= 0xf; + if (bEndpointAddress < 8) + UICR0 &= ~(1 << bEndpointAddress); + else { + bEndpointAddress -= 8; + UICR1 &= ~(1 << bEndpointAddress); + } +} + +static void pio_irq_disable(int bEndpointAddress) +{ + bEndpointAddress &= 0xf; + if (bEndpointAddress < 8) + UICR0 |= 1 << bEndpointAddress; + else { + bEndpointAddress -= 8; + UICR1 |= 1 << bEndpointAddress; + } +} + +/* The UDCCR reg contains mask and interrupt status bits, + * so using '|=' isn't safe as it may ack an interrupt. + */ +#define UDCCR_MASK_BITS (UDCCR_REM | UDCCR_SRM | UDCCR_UDE) + +static inline void udc_set_mask_UDCCR(int mask) +{ + UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS); +} + +static inline void udc_clear_mask_UDCCR(int mask) +{ + UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS); +} + +static inline void udc_ack_int_UDCCR(int mask) +{ + /* udccr contains the bits we dont want to change */ + __u32 udccr = UDCCR & UDCCR_MASK_BITS; + + UDCCR = udccr | (mask & ~UDCCR_MASK_BITS); +} + +/* + * endpoint enable/disable + * + * we need to verify the descriptors used to enable endpoints. since pxa2xx + * endpoint configurations are fixed, and are pretty much always enabled, + * there's not a lot to manage here. + * + * because pxa2xx can't selectively initialize bulk (or interrupt) endpoints, + * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except + * for a single interface (with only the default altsetting) and for gadget + * drivers that don't halt endpoints (not reset by set_interface). that also + * means that if you use ISO, you must violate the USB spec rule that all + * iso endpoints must be in non-default altsettings. + */ +static int pxa2xx_ep_enable (struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct pxa2xx_ep *ep; + struct pxa2xx_udc *dev; + + ep = container_of (_ep, struct pxa2xx_ep, ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT + || ep->bEndpointAddress != desc->bEndpointAddress + || ep->fifo_size < le16_to_cpu + (desc->wMaxPacketSize)) { + DMSG("%s, bad ep or descriptor\n", __FUNCTION__); + return -EINVAL; + } + + /* xfer types must match, except that interrupt ~= bulk */ + if (ep->bmAttributes != desc->bmAttributes + && ep->bmAttributes != USB_ENDPOINT_XFER_BULK + && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { + DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name); + return -EINVAL; + } + + /* hardware _could_ do smaller, but driver doesn't */ + if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK + && le16_to_cpu (desc->wMaxPacketSize) + != BULK_FIFO_SIZE) + || !desc->wMaxPacketSize) { + DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name); + return -ERANGE; + } + + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + DMSG("%s, bogus device state\n", __FUNCTION__); + return -ESHUTDOWN; + } + + ep->desc = desc; + ep->dma = -1; + ep->stopped = 0; + ep->pio_irqs = ep->dma_irqs = 0; + ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize); + + /* flush fifo (mostly for OUT buffers) */ + pxa2xx_ep_fifo_flush (_ep); + + /* ... reset halt state too, if we could ... */ + +#ifdef USE_DMA + /* for (some) bulk and ISO endpoints, try to get a DMA channel and + * bind it to the endpoint. otherwise use PIO. + */ + switch (ep->bmAttributes) { + case USB_ENDPOINT_XFER_ISOC: + if (le16_to_cpu(desc->wMaxPacketSize) % 32) + break; + // fall through + case USB_ENDPOINT_XFER_BULK: + if (!use_dma || !ep->reg_drcmr) + break; + ep->dma = pxa_request_dma ((char *)_ep->name, + (le16_to_cpu (desc->wMaxPacketSize) > 64) + ? DMA_PRIO_MEDIUM /* some iso */ + : DMA_PRIO_LOW, + dma_nodesc_handler, ep); + if (ep->dma >= 0) { + *ep->reg_drcmr = DRCMR_MAPVLD | ep->dma; + DMSG("%s using dma%d\n", _ep->name, ep->dma); + } + } +#endif + + DBG(DBG_VERBOSE, "enabled %s\n", _ep->name); + return 0; +} + +static int pxa2xx_ep_disable (struct usb_ep *_ep) +{ + struct pxa2xx_ep *ep; + unsigned long flags; + + ep = container_of (_ep, struct pxa2xx_ep, ep); + if (!_ep || !ep->desc) { + DMSG("%s, %s not enabled\n", __FUNCTION__, + _ep ? ep->ep.name : NULL); + return -EINVAL; + } + local_irq_save(flags); + + nuke (ep, -ESHUTDOWN); + +#ifdef USE_DMA + if (ep->dma >= 0) { + *ep->reg_drcmr = 0; + pxa_free_dma (ep->dma); + ep->dma = -1; + } +#endif + + /* flush fifo (mostly for IN buffers) */ + pxa2xx_ep_fifo_flush (_ep); + + ep->desc = NULL; + ep->stopped = 1; + + local_irq_restore(flags); + DBG(DBG_VERBOSE, "%s disabled\n", _ep->name); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* for the pxa2xx, these can just wrap kmalloc/kfree. gadget drivers + * must still pass correctly initialized endpoints, since other controller + * drivers may care about how it's currently set up (dma issues etc). + */ + +/* + * pxa2xx_ep_alloc_request - allocate a request data structure + */ +static struct usb_request * +pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct pxa2xx_request *req; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD (&req->queue); + return &req->req; +} + + +/* + * pxa2xx_ep_free_request - deallocate a request data structure + */ +static void +pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req) +{ + struct pxa2xx_request *req; + + req = container_of (_req, struct pxa2xx_request, req); + WARN_ON (!list_empty (&req->queue)); + kfree(req); +} + + +/* PXA cache needs flushing with DMA I/O (it's dma-incoherent), but there's + * no device-affinity and the heap works perfectly well for i/o buffers. + * It wastes much less memory than dma_alloc_coherent() would, and even + * prevents cacheline (32 bytes wide) sharing problems. + */ +static void * +pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes, + dma_addr_t *dma, gfp_t gfp_flags) +{ + char *retval; + + retval = kmalloc (bytes, gfp_flags & ~(__GFP_DMA|__GFP_HIGHMEM)); + if (retval) +#ifdef USE_DMA + *dma = virt_to_bus (retval); +#else + *dma = (dma_addr_t)~0; +#endif + return retval; +} + +static void +pxa2xx_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, + unsigned bytes) +{ + kfree (buf); +} + +/*-------------------------------------------------------------------------*/ + +/* + * done - retire a request; caller blocked irqs + */ +static void done(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int status) +{ + unsigned stopped = ep->stopped; + + list_del_init(&req->queue); + + if (likely (req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + if (status && status != -ESHUTDOWN) + DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + req->req.complete(&ep->ep, &req->req); + ep->stopped = stopped; +} + + +static inline void ep0_idle (struct pxa2xx_udc *dev) +{ + dev->ep0state = EP0_IDLE; +} + +static int +write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max) +{ + u8 *buf; + unsigned length, count; + + buf = req->req.buf + req->req.actual; + prefetch(buf); + + /* how big will this packet be? */ + length = min(req->req.length - req->req.actual, max); + req->req.actual += length; + + count = length; + while (likely(count--)) + *uddr = *buf++; + + return length; +} + +/* + * write to an IN endpoint fifo, as many packets as possible. + * irqs will use this to write the rest later. + * caller guarantees at least one packet buffer is ready (or a zlp). + */ +static int +write_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req) +{ + unsigned max; + + max = le16_to_cpu(ep->desc->wMaxPacketSize); + do { + unsigned count; + int is_last, is_short; + + count = write_packet(ep->reg_uddr, req, max); + + /* last packet is usually short (or a zlp) */ + if (unlikely (count != max)) + is_last = is_short = 1; + else { + if (likely(req->req.length != req->req.actual) + || req->req.zero) + is_last = 0; + else + is_last = 1; + /* interrupt/iso maxpacket may not fill the fifo */ + is_short = unlikely (max < ep->fifo_size); + } + + DBG(DBG_VERY_NOISY, "wrote %s %d bytes%s%s %d left %p\n", + ep->ep.name, count, + is_last ? "/L" : "", is_short ? "/S" : "", + req->req.length - req->req.actual, req); + + /* let loose that packet. maybe try writing another one, + * double buffering might work. TSP, TPC, and TFS + * bit values are the same for all normal IN endpoints. + */ + *ep->reg_udccs = UDCCS_BI_TPC; + if (is_short) + *ep->reg_udccs = UDCCS_BI_TSP; + + /* requests complete when all IN data is in the FIFO */ + if (is_last) { + done (ep, req, 0); + if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) { + pio_irq_disable (ep->bEndpointAddress); +#ifdef USE_DMA + /* unaligned data and zlps couldn't use dma */ + if (unlikely(!list_empty(&ep->queue))) { + req = list_entry(ep->queue.next, + struct pxa2xx_request, queue); + kick_dma(ep,req); + return 0; + } +#endif + } + return 1; + } + + // TODO experiment: how robust can fifo mode tweaking be? + // double buffering is off in the default fifo mode, which + // prevents TFS from being set here. + + } while (*ep->reg_udccs & UDCCS_BI_TFS); + return 0; +} + +/* caller asserts req->pending (ep0 irq status nyet cleared); starts + * ep0 data stage. these chips want very simple state transitions. + */ +static inline +void ep0start(struct pxa2xx_udc *dev, u32 flags, const char *tag) +{ + UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR; + USIR0 = USIR0_IR0; + dev->req_pending = 0; + DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n", + __FUNCTION__, tag, UDCCS0, flags); +} + +static int +write_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req) +{ + unsigned count; + int is_short; + + count = write_packet(&UDDR0, req, EP0_FIFO_SIZE); + ep->dev->stats.write.bytes += count; + + /* last packet "must be" short (or a zlp) */ + is_short = (count != EP0_FIFO_SIZE); + + DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count, + req->req.length - req->req.actual, req); + + if (unlikely (is_short)) { + if (ep->dev->req_pending) + ep0start(ep->dev, UDCCS0_IPR, "short IN"); + else + UDCCS0 = UDCCS0_IPR; + + count = req->req.length; + done (ep, req, 0); + ep0_idle(ep->dev); +#ifndef CONFIG_ARCH_IXP4XX +#if 1 + /* This seems to get rid of lost status irqs in some cases: + * host responds quickly, or next request involves config + * change automagic, or should have been hidden, or ... + * + * FIXME get rid of all udelays possible... + */ + if (count >= EP0_FIFO_SIZE) { + count = 100; + do { + if ((UDCCS0 & UDCCS0_OPR) != 0) { + /* clear OPR, generate ack */ + UDCCS0 = UDCCS0_OPR; + break; + } + count--; + udelay(1); + } while (count); + } +#endif +#endif + } else if (ep->dev->req_pending) + ep0start(ep->dev, 0, "IN"); + return is_short; +} + + +/* + * read_fifo - unload packet(s) from the fifo we use for usb OUT + * transfers and put them into the request. caller should have made + * sure there's at least one packet ready. + * + * returns true if the request completed because of short packet or the + * request buffer having filled (and maybe overran till end-of-packet). + */ +static int +read_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req) +{ + for (;;) { + u32 udccs; + u8 *buf; + unsigned bufferspace, count, is_short; + + /* make sure there's a packet in the FIFO. + * UDCCS_{BO,IO}_RPC are all the same bit value. + * UDCCS_{BO,IO}_RNE are all the same bit value. + */ + udccs = *ep->reg_udccs; + if (unlikely ((udccs & UDCCS_BO_RPC) == 0)) + break; + buf = req->req.buf + req->req.actual; + prefetchw(buf); + bufferspace = req->req.length - req->req.actual; + + /* read all bytes from this packet */ + if (likely (udccs & UDCCS_BO_RNE)) { + count = 1 + (0x0ff & *ep->reg_ubcr); + req->req.actual += min (count, bufferspace); + } else /* zlp */ + count = 0; + is_short = (count < ep->ep.maxpacket); + DBG(DBG_VERY_NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n", + ep->ep.name, udccs, count, + is_short ? "/S" : "", + req, req->req.actual, req->req.length); + while (likely (count-- != 0)) { + u8 byte = (u8) *ep->reg_uddr; + + if (unlikely (bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data. + */ + if (req->req.status != -EOVERFLOW) + DMSG("%s overflow %d\n", + ep->ep.name, count); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + bufferspace--; + } + } + *ep->reg_udccs = UDCCS_BO_RPC; + /* RPC/RSP/RNE could now reflect the other packet buffer */ + + /* iso is one request per packet */ + if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (udccs & UDCCS_IO_ROF) + req->req.status = -EHOSTUNREACH; + /* more like "is_done" */ + is_short = 1; + } + + /* completion */ + if (is_short || req->req.actual == req->req.length) { + done (ep, req, 0); + if (list_empty(&ep->queue)) + pio_irq_disable (ep->bEndpointAddress); + return 1; + } + + /* finished that packet. the next one may be waiting... */ + } + return 0; +} + +/* + * special ep0 version of the above. no UBCR0 or double buffering; status + * handshaking is magic. most device protocols don't need control-OUT. + * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other + * protocols do use them. + */ +static int +read_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req) +{ + u8 *buf, byte; + unsigned bufferspace; + + buf = req->req.buf + req->req.actual; + bufferspace = req->req.length - req->req.actual; + + while (UDCCS0 & UDCCS0_RNE) { + byte = (u8) UDDR0; + + if (unlikely (bufferspace == 0)) { + /* this happens when the driver's buffer + * is smaller than what the host sent. + * discard the extra data. + */ + if (req->req.status != -EOVERFLOW) + DMSG("%s overflow\n", ep->ep.name); + req->req.status = -EOVERFLOW; + } else { + *buf++ = byte; + req->req.actual++; + bufferspace--; + } + } + + UDCCS0 = UDCCS0_OPR | UDCCS0_IPR; + + /* completion */ + if (req->req.actual >= req->req.length) + return 1; + + /* finished that packet. the next one may be waiting... */ + return 0; +} + +#ifdef USE_DMA + +#define MAX_IN_DMA ((DCMD_LENGTH + 1) - BULK_FIFO_SIZE) + +static void +start_dma_nodesc(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int is_in) +{ + u32 dcmd = req->req.length; + u32 buf = req->req.dma; + u32 fifo = io_v2p ((u32)ep->reg_uddr); + + /* caller guarantees there's a packet or more remaining + * - IN may end with a short packet (TSP set separately), + * - OUT is always full length + */ + buf += req->req.actual; + dcmd -= req->req.actual; + ep->dma_fixup = 0; + + /* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */ + DCSR(ep->dma) = DCSR_NODESC; + if (is_in) { + DSADR(ep->dma) = buf; + DTADR(ep->dma) = fifo; + if (dcmd > MAX_IN_DMA) + dcmd = MAX_IN_DMA; + else + ep->dma_fixup = (dcmd % ep->ep.maxpacket) != 0; + dcmd |= DCMD_BURST32 | DCMD_WIDTH1 + | DCMD_FLOWTRG | DCMD_INCSRCADDR; + } else { +#ifdef USE_OUT_DMA + DSADR(ep->dma) = fifo; + DTADR(ep->dma) = buf; + if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC) + dcmd = ep->ep.maxpacket; + dcmd |= DCMD_BURST32 | DCMD_WIDTH1 + | DCMD_FLOWSRC | DCMD_INCTRGADDR; +#endif + } + DCMD(ep->dma) = dcmd; + DCSR(ep->dma) = DCSR_RUN | DCSR_NODESC + | (unlikely(is_in) + ? DCSR_STOPIRQEN /* use dma_nodesc_handler() */ + : 0); /* use handle_ep() */ +} + +static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req) +{ + int is_in = ep->bEndpointAddress & USB_DIR_IN; + + if (is_in) { + /* unaligned tx buffers and zlps only work with PIO */ + if ((req->req.dma & 0x0f) != 0 + || unlikely((req->req.length - req->req.actual) + == 0)) { + pio_irq_enable(ep->bEndpointAddress); + if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0) + (void) write_fifo(ep, req); + } else { + start_dma_nodesc(ep, req, USB_DIR_IN); + } + } else { + if ((req->req.length - req->req.actual) < ep->ep.maxpacket) { + DMSG("%s short dma read...\n", ep->ep.name); + /* we're always set up for pio out */ + read_fifo (ep, req); + } else { + *ep->reg_udccs = UDCCS_BO_DME + | (*ep->reg_udccs & UDCCS_BO_FST); + start_dma_nodesc(ep, req, USB_DIR_OUT); + } + } +} + +static void cancel_dma(struct pxa2xx_ep *ep) +{ + struct pxa2xx_request *req; + u32 tmp; + + if (DCSR(ep->dma) == 0 || list_empty(&ep->queue)) + return; + + DCSR(ep->dma) = 0; + while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0) + cpu_relax(); + + req = list_entry(ep->queue.next, struct pxa2xx_request, queue); + tmp = DCMD(ep->dma) & DCMD_LENGTH; + req->req.actual = req->req.length - (tmp & DCMD_LENGTH); + + /* the last tx packet may be incomplete, so flush the fifo. + * FIXME correct req.actual if we can + */ + if (ep->bEndpointAddress & USB_DIR_IN) + *ep->reg_udccs = UDCCS_BI_FTF; +} + +/* dma channel stopped ... normal tx end (IN), or on error (IN/OUT) */ +static void dma_nodesc_handler(int dmach, void *_ep) +{ + struct pxa2xx_ep *ep = _ep; + struct pxa2xx_request *req; + u32 tmp, completed; + + local_irq_disable(); + + req = list_entry(ep->queue.next, struct pxa2xx_request, queue); + + ep->dma_irqs++; + ep->dev->stats.irqs++; + HEX_DISPLAY(ep->dev->stats.irqs); + + /* ack/clear */ + tmp = DCSR(ep->dma); + DCSR(ep->dma) = tmp; + if ((tmp & DCSR_STOPSTATE) == 0 + || (DDADR(ep->dma) & DDADR_STOP) != 0) { + DBG(DBG_VERBOSE, "%s, dcsr %08x ddadr %08x\n", + ep->ep.name, DCSR(ep->dma), DDADR(ep->dma)); + goto done; + } + DCSR(ep->dma) = 0; /* clear DCSR_STOPSTATE */ + + /* update transfer status */ + completed = tmp & DCSR_BUSERR; + if (ep->bEndpointAddress & USB_DIR_IN) + tmp = DSADR(ep->dma); + else + tmp = DTADR(ep->dma); + req->req.actual = tmp - req->req.dma; + + /* FIXME seems we sometimes see partial transfers... */ + + if (unlikely(completed != 0)) + req->req.status = -EIO; + else if (req->req.actual) { + /* these registers have zeroes in low bits; they miscount + * some (end-of-transfer) short packets: tx 14 as tx 12 + */ + if (ep->dma_fixup) + req->req.actual = min(req->req.actual + 3, + req->req.length); + + tmp = (req->req.length - req->req.actual); + completed = (tmp == 0); + if (completed && (ep->bEndpointAddress & USB_DIR_IN)) { + + /* maybe validate final short packet ... */ + if ((req->req.actual % ep->ep.maxpacket) != 0) + *ep->reg_udccs = UDCCS_BI_TSP/*|UDCCS_BI_TPC*/; + + /* ... or zlp, using pio fallback */ + else if (ep->bmAttributes == USB_ENDPOINT_XFER_BULK + && req->req.zero) { + DMSG("%s zlp terminate ...\n", ep->ep.name); + completed = 0; + } + } + } + + if (likely(completed)) { + done(ep, req, 0); + + /* maybe re-activate after completion */ + if (ep->stopped || list_empty(&ep->queue)) + goto done; + req = list_entry(ep->queue.next, struct pxa2xx_request, queue); + } + kick_dma(ep, req); +done: + local_irq_enable(); +} + +#endif + +/*-------------------------------------------------------------------------*/ + +static int +pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct pxa2xx_request *req; + struct pxa2xx_ep *ep; + struct pxa2xx_udc *dev; + unsigned long flags; + + req = container_of(_req, struct pxa2xx_request, req); + if (unlikely (!_req || !_req->complete || !_req->buf + || !list_empty(&req->queue))) { + DMSG("%s, bad params\n", __FUNCTION__); + return -EINVAL; + } + + ep = container_of(_ep, struct pxa2xx_ep, ep); + if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { + DMSG("%s, bad ep\n", __FUNCTION__); + return -EINVAL; + } + + dev = ep->dev; + if (unlikely (!dev->driver + || dev->gadget.speed == USB_SPEED_UNKNOWN)) { + DMSG("%s, bogus device state\n", __FUNCTION__); + return -ESHUTDOWN; + } + + /* iso is always one packet per request, that's the only way + * we can report per-packet status. that also helps with dma. + */ + if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + && req->req.length > le16_to_cpu + (ep->desc->wMaxPacketSize))) + return -EMSGSIZE; + +#ifdef USE_DMA + // FIXME caller may already have done the dma mapping + if (ep->dma >= 0) { + _req->dma = dma_map_single(dev->dev, + _req->buf, _req->length, + ((ep->bEndpointAddress & USB_DIR_IN) != 0) + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + } +#endif + + DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n", + _ep->name, _req, _req->length, _req->buf); + + local_irq_save(flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* kickstart this i/o queue? */ + if (list_empty(&ep->queue) && !ep->stopped) { + if (ep->desc == 0 /* ep0 */) { + unsigned length = _req->length; + + switch (dev->ep0state) { + case EP0_IN_DATA_PHASE: + dev->stats.write.ops++; + if (write_ep0_fifo(ep, req)) + req = NULL; + break; + + case EP0_OUT_DATA_PHASE: + dev->stats.read.ops++; + /* messy ... */ + if (dev->req_config) { + DBG(DBG_VERBOSE, "ep0 config ack%s\n", + dev->has_cfr ? "" : " raced"); + if (dev->has_cfr) + UDCCFR = UDCCFR_AREN|UDCCFR_ACM + |UDCCFR_MB1; + done(ep, req, 0); + dev->ep0state = EP0_END_XFER; + local_irq_restore (flags); + return 0; + } + if (dev->req_pending) + ep0start(dev, UDCCS0_IPR, "OUT"); + if (length == 0 || ((UDCCS0 & UDCCS0_RNE) != 0 + && read_ep0_fifo(ep, req))) { + ep0_idle(dev); + done(ep, req, 0); + req = NULL; + } + break; + + default: + DMSG("ep0 i/o, odd state %d\n", dev->ep0state); + local_irq_restore (flags); + return -EL2HLT; + } +#ifdef USE_DMA + /* either start dma or prime pio pump */ + } else if (ep->dma >= 0) { + kick_dma(ep, req); +#endif + /* can the FIFO can satisfy the request immediately? */ + } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) { + if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0 + && write_fifo(ep, req)) + req = NULL; + } else if ((*ep->reg_udccs & UDCCS_BO_RFS) != 0 + && read_fifo(ep, req)) { + req = NULL; + } + + if (likely (req && ep->desc) && ep->dma < 0) + pio_irq_enable(ep->bEndpointAddress); + } + + /* pio or dma irq handler advances the queue. */ + if (likely (req != 0)) + list_add_tail(&req->queue, &ep->queue); + local_irq_restore(flags); + + return 0; +} + + +/* + * nuke - dequeue ALL requests + */ +static void nuke(struct pxa2xx_ep *ep, int status) +{ + struct pxa2xx_request *req; + + /* called with irqs blocked */ +#ifdef USE_DMA + if (ep->dma >= 0 && !ep->stopped) + cancel_dma(ep); +#endif + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct pxa2xx_request, + queue); + done(ep, req, status); + } + if (ep->desc) + pio_irq_disable (ep->bEndpointAddress); +} + + +/* dequeue JUST ONE request */ +static int pxa2xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct pxa2xx_ep *ep; + struct pxa2xx_request *req; + unsigned long flags; + + ep = container_of(_ep, struct pxa2xx_ep, ep); + if (!_ep || ep->ep.name == ep0name) + return -EINVAL; + + local_irq_save(flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry (req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + local_irq_restore(flags); + return -EINVAL; + } + +#ifdef USE_DMA + if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) { + cancel_dma(ep); + done(ep, req, -ECONNRESET); + /* restart i/o */ + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct pxa2xx_request, queue); + kick_dma(ep, req); + } + } else +#endif + done(ep, req, -ECONNRESET); + + local_irq_restore(flags); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct pxa2xx_ep *ep; + unsigned long flags; + + ep = container_of(_ep, struct pxa2xx_ep, ep); + if (unlikely (!_ep + || (!ep->desc && ep->ep.name != ep0name)) + || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + DMSG("%s, bad ep\n", __FUNCTION__); + return -EINVAL; + } + if (value == 0) { + /* this path (reset toggle+halt) is needed to implement + * SET_INTERFACE on normal hardware. but it can't be + * done from software on the PXA UDC, and the hardware + * forgets to do it as part of SET_INTERFACE automagic. + */ + DMSG("only host can clear %s halt\n", _ep->name); + return -EROFS; + } + + local_irq_save(flags); + + if ((ep->bEndpointAddress & USB_DIR_IN) != 0 + && ((*ep->reg_udccs & UDCCS_BI_TFS) == 0 + || !list_empty(&ep->queue))) { + local_irq_restore(flags); + return -EAGAIN; + } + + /* FST bit is the same for control, bulk in, bulk out, interrupt in */ + *ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF; + + /* ep0 needs special care */ + if (!ep->desc) { + start_watchdog(ep->dev); + ep->dev->req_pending = 0; + ep->dev->ep0state = EP0_STALL; + + /* and bulk/intr endpoints like dropping stalls too */ + } else { + unsigned i; + for (i = 0; i < 1000; i += 20) { + if (*ep->reg_udccs & UDCCS_BI_SST) + break; + udelay(20); + } + } + local_irq_restore(flags); + + DBG(DBG_VERBOSE, "%s halt\n", _ep->name); + return 0; +} + +static int pxa2xx_ep_fifo_status(struct usb_ep *_ep) +{ + struct pxa2xx_ep *ep; + + ep = container_of(_ep, struct pxa2xx_ep, ep); + if (!_ep) { + DMSG("%s, bad ep\n", __FUNCTION__); + return -ENODEV; + } + /* pxa can't report unclaimed bytes from IN fifos */ + if ((ep->bEndpointAddress & USB_DIR_IN) != 0) + return -EOPNOTSUPP; + if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN + || (*ep->reg_udccs & UDCCS_BO_RFS) == 0) + return 0; + else + return (*ep->reg_ubcr & 0xfff) + 1; +} + +static void pxa2xx_ep_fifo_flush(struct usb_ep *_ep) +{ + struct pxa2xx_ep *ep; + + ep = container_of(_ep, struct pxa2xx_ep, ep); + if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) { + DMSG("%s, bad ep\n", __FUNCTION__); + return; + } + + /* toggle and halt bits stay unchanged */ + + /* for OUT, just read and discard the FIFO contents. */ + if ((ep->bEndpointAddress & USB_DIR_IN) == 0) { + while (((*ep->reg_udccs) & UDCCS_BO_RNE) != 0) + (void) *ep->reg_uddr; + return; + } + + /* most IN status is the same, but ISO can't stall */ + *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR + | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) + ? 0 : UDCCS_BI_SST; +} + + +static struct usb_ep_ops pxa2xx_ep_ops = { + .enable = pxa2xx_ep_enable, + .disable = pxa2xx_ep_disable, + + .alloc_request = pxa2xx_ep_alloc_request, + .free_request = pxa2xx_ep_free_request, + + .alloc_buffer = pxa2xx_ep_alloc_buffer, + .free_buffer = pxa2xx_ep_free_buffer, + + .queue = pxa2xx_ep_queue, + .dequeue = pxa2xx_ep_dequeue, + + .set_halt = pxa2xx_ep_set_halt, + .fifo_status = pxa2xx_ep_fifo_status, + .fifo_flush = pxa2xx_ep_fifo_flush, +}; + + +/* --------------------------------------------------------------------------- + * device-scoped parts of the api to the usb controller hardware + * --------------------------------------------------------------------------- + */ + +static int pxa2xx_udc_get_frame(struct usb_gadget *_gadget) +{ + return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff); +} + +static int pxa2xx_udc_wakeup(struct usb_gadget *_gadget) +{ + /* host may not have enabled remote wakeup */ + if ((UDCCS0 & UDCCS0_DRWF) == 0) + return -EHOSTUNREACH; + udc_set_mask_UDCCR(UDCCR_RSM); + return 0; +} + +static void stop_activity(struct pxa2xx_udc *, struct usb_gadget_driver *); +static void udc_enable (struct pxa2xx_udc *); +static void udc_disable(struct pxa2xx_udc *); + +/* We disable the UDC -- and its 48 MHz clock -- whenever it's not + * in active use. + */ +static int pullup(struct pxa2xx_udc *udc, int is_active) +{ + is_active = is_active && udc->vbus && udc->pullup; + DMSG("%s\n", is_active ? "active" : "inactive"); + if (is_active) + udc_enable(udc); + else { + if (udc->gadget.speed != USB_SPEED_UNKNOWN) { + DMSG("disconnect %s\n", udc->driver + ? udc->driver->driver.name + : "(no driver)"); + stop_activity(udc, udc->driver); + } + udc_disable(udc); + } + return 0; +} + +/* VBUS reporting logically comes from a transceiver */ +static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active) +{ + struct pxa2xx_udc *udc; + + udc = container_of(_gadget, struct pxa2xx_udc, gadget); + udc->vbus = is_active = (is_active != 0); + DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); + pullup(udc, is_active); + return 0; +} + +/* drivers may have software control over D+ pullup */ +static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active) +{ + struct pxa2xx_udc *udc; + + udc = container_of(_gadget, struct pxa2xx_udc, gadget); + + /* not all boards support pullup control */ + if (!udc->mach->udc_command) + return -EOPNOTSUPP; + + is_active = (is_active != 0); + udc->pullup = is_active; + pullup(udc, is_active); + return 0; +} + +static const struct usb_gadget_ops pxa2xx_udc_ops = { + .get_frame = pxa2xx_udc_get_frame, + .wakeup = pxa2xx_udc_wakeup, + .vbus_session = pxa2xx_udc_vbus_session, + .pullup = pxa2xx_udc_pullup, + + // .vbus_draw ... boards may consume current from VBUS, up to + // 100-500mA based on config. the 500uA suspend ceiling means + // that exclusively vbus-powered PXA designs violate USB specs. +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static const char proc_node_name [] = "driver/udc"; + +static int +udc_proc_read(char *page, char **start, off_t off, int count, + int *eof, void *_dev) +{ + char *buf = page; + struct pxa2xx_udc *dev = _dev; + char *next = buf; + unsigned size = count; + unsigned long flags; + int i, t; + u32 tmp; + + if (off != 0) + return 0; + + local_irq_save(flags); + + /* basic device status */ + t = scnprintf(next, size, DRIVER_DESC "\n" + "%s version: %s\nGadget driver: %s\nHost %s\n\n", + driver_name, DRIVER_VERSION SIZE_STR DMASTR, + dev->driver ? dev->driver->driver.name : "(none)", + is_vbus_present() ? "full speed" : "disconnected"); + size -= t; + next += t; + + /* registers for device and ep0 */ + t = scnprintf(next, size, + "uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", + UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); + size -= t; + next += t; + + tmp = UDCCR; + t = scnprintf(next, size, + "udccr %02X =%s%s%s%s%s%s%s%s\n", tmp, + (tmp & UDCCR_REM) ? " rem" : "", + (tmp & UDCCR_RSTIR) ? " rstir" : "", + (tmp & UDCCR_SRM) ? " srm" : "", + (tmp & UDCCR_SUSIR) ? " susir" : "", + (tmp & UDCCR_RESIR) ? " resir" : "", + (tmp & UDCCR_RSM) ? " rsm" : "", + (tmp & UDCCR_UDA) ? " uda" : "", + (tmp & UDCCR_UDE) ? " ude" : ""); + size -= t; + next += t; + + tmp = UDCCS0; + t = scnprintf(next, size, + "udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp, + (tmp & UDCCS0_SA) ? " sa" : "", + (tmp & UDCCS0_RNE) ? " rne" : "", + (tmp & UDCCS0_FST) ? " fst" : "", + (tmp & UDCCS0_SST) ? " sst" : "", + (tmp & UDCCS0_DRWF) ? " dwrf" : "", + (tmp & UDCCS0_FTF) ? " ftf" : "", + (tmp & UDCCS0_IPR) ? " ipr" : "", + (tmp & UDCCS0_OPR) ? " opr" : ""); + size -= t; + next += t; + + if (dev->has_cfr) { + tmp = UDCCFR; + t = scnprintf(next, size, + "udccfr %02X =%s%s\n", tmp, + (tmp & UDCCFR_AREN) ? " aren" : "", + (tmp & UDCCFR_ACM) ? " acm" : ""); + size -= t; + next += t; + } + + if (!is_vbus_present() || !dev->driver) + goto done; + + t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n", + dev->stats.write.bytes, dev->stats.write.ops, + dev->stats.read.bytes, dev->stats.read.ops, + dev->stats.irqs); + size -= t; + next += t; + + /* dump endpoint queues */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa2xx_ep *ep = &dev->ep [i]; + struct pxa2xx_request *req; + int t; + + if (i != 0) { + const struct usb_endpoint_descriptor *d; + + d = ep->desc; + if (!d) + continue; + tmp = *dev->ep [i].reg_udccs; + t = scnprintf(next, size, + "%s max %d %s udccs %02x irqs %lu/%lu\n", + ep->ep.name, le16_to_cpu (d->wMaxPacketSize), + (ep->dma >= 0) ? "dma" : "pio", tmp, + ep->pio_irqs, ep->dma_irqs); + /* TODO translate all five groups of udccs bits! */ + + } else /* ep0 should only have one transfer queued */ + t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n", + ep->pio_irqs); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + + if (list_empty(&ep->queue)) { + t = scnprintf(next, size, "\t(nothing queued)\n"); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + continue; + } + list_for_each_entry(req, &ep->queue, queue) { +#ifdef USE_DMA + if (ep->dma >= 0 && req->queue.prev == &ep->queue) + t = scnprintf(next, size, + "\treq %p len %d/%d " + "buf %p (dma%d dcmd %08x)\n", + &req->req, req->req.actual, + req->req.length, req->req.buf, + ep->dma, DCMD(ep->dma) + // low 13 bits == bytes-to-go + ); + else +#endif + t = scnprintf(next, size, + "\treq %p len %d/%d buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + } + } + +done: + local_irq_restore(flags); + *eof = 1; + return count - size; +} + +#define create_proc_files() \ + create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev) +#define remove_proc_files() \ + remove_proc_entry(proc_node_name, NULL) + +#else /* !CONFIG_USB_GADGET_DEBUG_FILES */ + +#define create_proc_files() do {} while (0) +#define remove_proc_files() do {} while (0) + +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + +/* "function" sysfs attribute */ +static ssize_t +show_function (struct device *_dev, struct device_attribute *attr, char *buf) +{ + struct pxa2xx_udc *dev = dev_get_drvdata (_dev); + + if (!dev->driver + || !dev->driver->function + || strlen (dev->driver->function) > PAGE_SIZE) + return 0; + return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function); +} +static DEVICE_ATTR (function, S_IRUGO, show_function, NULL); + +/*-------------------------------------------------------------------------*/ + +/* + * udc_disable - disable USB device controller + */ +static void udc_disable(struct pxa2xx_udc *dev) +{ + /* block all irqs */ + udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM); + UICR0 = UICR1 = 0xff; + UFNRH = UFNRH_SIM; + + /* if hardware supports it, disconnect from usb */ + pullup_off(); + + udc_clear_mask_UDCCR(UDCCR_UDE); + +#ifdef CONFIG_ARCH_PXA + /* Disable clock for USB device */ + pxa_set_cken(CKEN11_USB, 0); +#endif + + ep0_idle (dev); + dev->gadget.speed = USB_SPEED_UNKNOWN; + LED_CONNECTED_OFF; +} + + +/* + * udc_reinit - initialize software state + */ +static void udc_reinit(struct pxa2xx_udc *dev) +{ + u32 i; + + /* device/ep0 records init */ + INIT_LIST_HEAD (&dev->gadget.ep_list); + INIT_LIST_HEAD (&dev->gadget.ep0->ep_list); + dev->ep0state = EP0_IDLE; + + /* basic endpoint records init */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa2xx_ep *ep = &dev->ep[i]; + + if (i != 0) + list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); + + ep->desc = NULL; + ep->stopped = 0; + INIT_LIST_HEAD (&ep->queue); + ep->pio_irqs = ep->dma_irqs = 0; + } + + /* the rest was statically initialized, and is read-only */ +} + +/* until it's enabled, this UDC should be completely invisible + * to any USB host. + */ +static void udc_enable (struct pxa2xx_udc *dev) +{ + udc_clear_mask_UDCCR(UDCCR_UDE); + +#ifdef CONFIG_ARCH_PXA + /* Enable clock for USB device */ + pxa_set_cken(CKEN11_USB, 1); + udelay(5); +#endif + + /* try to clear these bits before we enable the udc */ + udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR); + + ep0_idle(dev); + dev->gadget.speed = USB_SPEED_UNKNOWN; + dev->stats.irqs = 0; + + /* + * sequence taken from chapter 12.5.10, PXA250 AppProcDevManual: + * - enable UDC + * - if RESET is already in progress, ack interrupt + * - unmask reset interrupt + */ + udc_set_mask_UDCCR(UDCCR_UDE); + if (!(UDCCR & UDCCR_UDA)) + udc_ack_int_UDCCR(UDCCR_RSTIR); + + if (dev->has_cfr /* UDC_RES2 is defined */) { + /* pxa255 (a0+) can avoid a set_config race that could + * prevent gadget drivers from configuring correctly + */ + UDCCFR = UDCCFR_ACM | UDCCFR_MB1; + } else { + /* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1) + * which could result in missing packets and interrupts. + * supposedly one bit per endpoint, controlling whether it + * double buffers or not; ACM/AREN bits fit into the holes. + * zero bits (like USIR0_IRx) disable double buffering. + */ + UDC_RES1 = 0x00; + UDC_RES2 = 0x00; + } + +#ifdef DISABLE_TEST_MODE + /* "test mode" seems to have become the default in later chip + * revs, preventing double buffering (and invalidating docs). + * this EXPERIMENT enables it for bulk endpoints by tweaking + * undefined/reserved register bits (that other drivers clear). + * Belcarra code comments noted this usage. + */ + if (fifo_mode & 1) { /* IN endpoints */ + UDC_RES1 |= USIR0_IR1|USIR0_IR6; + UDC_RES2 |= USIR1_IR11; + } + if (fifo_mode & 2) { /* OUT endpoints */ + UDC_RES1 |= USIR0_IR2|USIR0_IR7; + UDC_RES2 |= USIR1_IR12; + } +#endif + + /* enable suspend/resume and reset irqs */ + udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM); + + /* enable ep0 irqs */ + UICR0 &= ~UICR0_IM0; + + /* if hardware supports it, pullup D+ and wait for reset */ + pullup_on(); +} + + +/* when a driver is successfully registered, it will receive + * control requests including set_configuration(), which enables + * non-control requests. then usb traffic follows until a + * disconnect is reported. then a host may connect again, or + * the driver might get unbound. + */ +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +{ + struct pxa2xx_udc *dev = the_controller; + int retval; + + if (!driver + || driver->speed < USB_SPEED_FULL + || !driver->bind + || !driver->unbind + || !driver->disconnect + || !driver->setup) + return -EINVAL; + if (!dev) + return -ENODEV; + if (dev->driver) + return -EBUSY; + + /* first hook up the driver ... */ + dev->driver = driver; + dev->gadget.dev.driver = &driver->driver; + dev->pullup = 1; + + device_add (&dev->gadget.dev); + retval = driver->bind(&dev->gadget); + if (retval) { + DMSG("bind to driver %s --> error %d\n", + driver->driver.name, retval); + device_del (&dev->gadget.dev); + + dev->driver = NULL; + dev->gadget.dev.driver = NULL; + return retval; + } + device_create_file(dev->dev, &dev_attr_function); + + /* ... then enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + */ + DMSG("registered gadget driver '%s'\n", driver->driver.name); + pullup(dev, 1); + dump_state(dev); + return 0; +} +EXPORT_SYMBOL(usb_gadget_register_driver); + +static void +stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect drivers more than once */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + dev->gadget.speed = USB_SPEED_UNKNOWN; + + /* prevent new request submissions, kill any outstanding requests */ + for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { + struct pxa2xx_ep *ep = &dev->ep[i]; + + ep->stopped = 1; + nuke(ep, -ESHUTDOWN); + } + del_timer_sync(&dev->timer); + + /* report disconnect; the driver is already quiesced */ + LED_CONNECTED_OFF; + if (driver) + driver->disconnect(&dev->gadget); + + /* re-init driver-visible data structures */ + udc_reinit(dev); +} + +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct pxa2xx_udc *dev = the_controller; + + if (!dev) + return -ENODEV; + if (!driver || driver != dev->driver) + return -EINVAL; + + local_irq_disable(); + pullup(dev, 0); + stop_activity(dev, driver); + local_irq_enable(); + + driver->unbind(&dev->gadget); + dev->driver = NULL; + + device_del (&dev->gadget.dev); + device_remove_file(dev->dev, &dev_attr_function); + + DMSG("unregistered gadget driver '%s'\n", driver->driver.name); + dump_state(dev); + return 0; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); + + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_LUBBOCK + +/* Lubbock has separate connect and disconnect irqs. More typical designs + * use one GPIO as the VBUS IRQ, and another to control the D+ pullup. + */ + +static irqreturn_t +lubbock_vbus_irq(int irq, void *_dev) +{ + struct pxa2xx_udc *dev = _dev; + int vbus; + + dev->stats.irqs++; + HEX_DISPLAY(dev->stats.irqs); + switch (irq) { + case LUBBOCK_USB_IRQ: + LED_CONNECTED_ON; + vbus = 1; + disable_irq(LUBBOCK_USB_IRQ); + enable_irq(LUBBOCK_USB_DISC_IRQ); + break; + case LUBBOCK_USB_DISC_IRQ: + LED_CONNECTED_OFF; + vbus = 0; + disable_irq(LUBBOCK_USB_DISC_IRQ); + enable_irq(LUBBOCK_USB_IRQ); + break; + default: + return IRQ_NONE; + } + + pxa2xx_udc_vbus_session(&dev->gadget, vbus); + return IRQ_HANDLED; +} + +#endif + +static irqreturn_t udc_vbus_irq(int irq, void *_dev) +{ + struct pxa2xx_udc *dev = _dev; + int vbus = pxa_gpio_get(dev->mach->gpio_vbus); + + pxa2xx_udc_vbus_session(&dev->gadget, vbus); + return IRQ_HANDLED; +} + + +/*-------------------------------------------------------------------------*/ + +static inline void clear_ep_state (struct pxa2xx_udc *dev) +{ + unsigned i; + + /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint + * fifos, and pending transactions mustn't be continued in any case. + */ + for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) + nuke(&dev->ep[i], -ECONNABORTED); +} + +static void udc_watchdog(unsigned long _dev) +{ + struct pxa2xx_udc *dev = (void *)_dev; + + local_irq_disable(); + if (dev->ep0state == EP0_STALL + && (UDCCS0 & UDCCS0_FST) == 0 + && (UDCCS0 & UDCCS0_SST) == 0) { + UDCCS0 = UDCCS0_FST|UDCCS0_FTF; + DBG(DBG_VERBOSE, "ep0 re-stall\n"); + start_watchdog(dev); + } + local_irq_enable(); +} + +static void handle_ep0 (struct pxa2xx_udc *dev) +{ + u32 udccs0 = UDCCS0; + struct pxa2xx_ep *ep = &dev->ep [0]; + struct pxa2xx_request *req; + union { + struct usb_ctrlrequest r; + u8 raw [8]; + u32 word [2]; + } u; + + if (list_empty(&ep->queue)) + req = NULL; + else + req = list_entry(ep->queue.next, struct pxa2xx_request, queue); + + /* clear stall status */ + if (udccs0 & UDCCS0_SST) { + nuke(ep, -EPIPE); + UDCCS0 = UDCCS0_SST; + del_timer(&dev->timer); + ep0_idle(dev); + } + + /* previous request unfinished? non-error iff back-to-back ... */ + if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) { + nuke(ep, 0); + del_timer(&dev->timer); + ep0_idle(dev); + } + + switch (dev->ep0state) { + case EP0_IDLE: + /* late-breaking status? */ + udccs0 = UDCCS0; + + /* start control request? */ + if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE)) + == (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) { + int i; + + nuke (ep, -EPROTO); + + /* read SETUP packet */ + for (i = 0; i < 8; i++) { + if (unlikely(!(UDCCS0 & UDCCS0_RNE))) { +bad_setup: + DMSG("SETUP %d!\n", i); + goto stall; + } + u.raw [i] = (u8) UDDR0; + } + if (unlikely((UDCCS0 & UDCCS0_RNE) != 0)) + goto bad_setup; + +got_setup: + DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n", + u.r.bRequestType, u.r.bRequest, + le16_to_cpu(u.r.wValue), + le16_to_cpu(u.r.wIndex), + le16_to_cpu(u.r.wLength)); + + /* cope with automagic for some standard requests. */ + dev->req_std = (u.r.bRequestType & USB_TYPE_MASK) + == USB_TYPE_STANDARD; + dev->req_config = 0; + dev->req_pending = 1; + switch (u.r.bRequest) { + /* hardware restricts gadget drivers here! */ + case USB_REQ_SET_CONFIGURATION: + if (u.r.bRequestType == USB_RECIP_DEVICE) { + /* reflect hardware's automagic + * up to the gadget driver. + */ +config_change: + dev->req_config = 1; + clear_ep_state(dev); + /* if !has_cfr, there's no synch + * else use AREN (later) not SA|OPR + * USIR0_IR0 acts edge sensitive + */ + } + break; + /* ... and here, even more ... */ + case USB_REQ_SET_INTERFACE: + if (u.r.bRequestType == USB_RECIP_INTERFACE) { + /* udc hardware is broken by design: + * - altsetting may only be zero; + * - hw resets all interfaces' eps; + * - ep reset doesn't include halt(?). + */ + DMSG("broken set_interface (%d/%d)\n", + le16_to_cpu(u.r.wIndex), + le16_to_cpu(u.r.wValue)); + goto config_change; + } + break; + /* hardware was supposed to hide this */ + case USB_REQ_SET_ADDRESS: + if (u.r.bRequestType == USB_RECIP_DEVICE) { + ep0start(dev, 0, "address"); + return; + } + break; + } + + if (u.r.bRequestType & USB_DIR_IN) + dev->ep0state = EP0_IN_DATA_PHASE; + else + dev->ep0state = EP0_OUT_DATA_PHASE; + + i = dev->driver->setup(&dev->gadget, &u.r); + if (i < 0) { + /* hardware automagic preventing STALL... */ + if (dev->req_config) { + /* hardware sometimes neglects to tell + * tell us about config change events, + * so later ones may fail... + */ + WARN("config change %02x fail %d?\n", + u.r.bRequest, i); + return; + /* TODO experiment: if has_cfr, + * hardware didn't ACK; maybe we + * could actually STALL! + */ + } + DBG(DBG_VERBOSE, "protocol STALL, " + "%02x err %d\n", UDCCS0, i); +stall: + /* the watchdog timer helps deal with cases + * where udc seems to clear FST wrongly, and + * then NAKs instead of STALLing. + */ + ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall"); + start_watchdog(dev); + dev->ep0state = EP0_STALL; + + /* deferred i/o == no response yet */ + } else if (dev->req_pending) { + if (likely(dev->ep0state == EP0_IN_DATA_PHASE + || dev->req_std || u.r.wLength)) + ep0start(dev, 0, "defer"); + else + ep0start(dev, UDCCS0_IPR, "defer/IPR"); + } + + /* expect at least one data or status stage irq */ + return; + + } else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA)) + == (UDCCS0_OPR|UDCCS0_SA))) { + unsigned i; + + /* pxa210/250 erratum 131 for B0/B1 says RNE lies. + * still observed on a pxa255 a0. + */ + DBG(DBG_VERBOSE, "e131\n"); + nuke(ep, -EPROTO); + + /* read SETUP data, but don't trust it too much */ + for (i = 0; i < 8; i++) + u.raw [i] = (u8) UDDR0; + if ((u.r.bRequestType & USB_RECIP_MASK) + > USB_RECIP_OTHER) + goto stall; + if (u.word [0] == 0 && u.word [1] == 0) + goto stall; + goto got_setup; + } else { + /* some random early IRQ: + * - we acked FST + * - IPR cleared + * - OPR got set, without SA (likely status stage) + */ + UDCCS0 = udccs0 & (UDCCS0_SA|UDCCS0_OPR); + } + break; + case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ + if (udccs0 & UDCCS0_OPR) { + UDCCS0 = UDCCS0_OPR|UDCCS0_FTF; + DBG(DBG_VERBOSE, "ep0in premature status\n"); + if (req) + done(ep, req, 0); + ep0_idle(dev); + } else /* irq was IPR clearing */ { + if (req) { + /* this IN packet might finish the request */ + (void) write_ep0_fifo(ep, req); + } /* else IN token before response was written */ + } + break; + case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ + if (udccs0 & UDCCS0_OPR) { + if (req) { + /* this OUT packet might finish the request */ + if (read_ep0_fifo(ep, req)) + done(ep, req, 0); + /* else more OUT packets expected */ + } /* else OUT token before read was issued */ + } else /* irq was IPR clearing */ { + DBG(DBG_VERBOSE, "ep0out premature status\n"); + if (req) + done(ep, req, 0); + ep0_idle(dev); + } + break; + case EP0_END_XFER: + if (req) + done(ep, req, 0); + /* ack control-IN status (maybe in-zlp was skipped) + * also appears after some config change events. + */ + if (udccs0 & UDCCS0_OPR) + UDCCS0 = UDCCS0_OPR; + ep0_idle(dev); + break; + case EP0_STALL: + UDCCS0 = UDCCS0_FST; + break; + } + USIR0 = USIR0_IR0; +} + +static void handle_ep(struct pxa2xx_ep *ep) +{ + struct pxa2xx_request *req; + int is_in = ep->bEndpointAddress & USB_DIR_IN; + int completed; + u32 udccs, tmp; + + do { + completed = 0; + if (likely (!list_empty(&ep->queue))) + req = list_entry(ep->queue.next, + struct pxa2xx_request, queue); + else + req = NULL; + + // TODO check FST handling + + udccs = *ep->reg_udccs; + if (unlikely(is_in)) { /* irq from TPC, SST, or (ISO) TUR */ + tmp = UDCCS_BI_TUR; + if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK)) + tmp |= UDCCS_BI_SST; + tmp &= udccs; + if (likely (tmp)) + *ep->reg_udccs = tmp; + if (req && likely ((udccs & UDCCS_BI_TFS) != 0)) + completed = write_fifo(ep, req); + + } else { /* irq from RPC (or for ISO, ROF) */ + if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK)) + tmp = UDCCS_BO_SST | UDCCS_BO_DME; + else + tmp = UDCCS_IO_ROF | UDCCS_IO_DME; + tmp &= udccs; + if (likely(tmp)) + *ep->reg_udccs = tmp; + + /* fifos can hold packets, ready for reading... */ + if (likely(req)) { +#ifdef USE_OUT_DMA +// TODO didn't yet debug out-dma. this approach assumes +// the worst about short packets and RPC; it might be better. + + if (likely(ep->dma >= 0)) { + if (!(udccs & UDCCS_BO_RSP)) { + *ep->reg_udccs = UDCCS_BO_RPC; + ep->dma_irqs++; + return; + } + } +#endif + completed = read_fifo(ep, req); + } else + pio_irq_disable (ep->bEndpointAddress); + } + ep->pio_irqs++; + } while (completed); +} + +/* + * pxa2xx_udc_irq - interrupt handler + * + * avoid delays in ep0 processing. the control handshaking isn't always + * under software control (pxa250c0 and the pxa255 are better), and delays + * could cause usb protocol errors. + */ +static irqreturn_t +pxa2xx_udc_irq(int irq, void *_dev) +{ + struct pxa2xx_udc *dev = _dev; + int handled; + + dev->stats.irqs++; + HEX_DISPLAY(dev->stats.irqs); + do { + u32 udccr = UDCCR; + + handled = 0; + + /* SUSpend Interrupt Request */ + if (unlikely(udccr & UDCCR_SUSIR)) { + udc_ack_int_UDCCR(UDCCR_SUSIR); + handled = 1; + DBG(DBG_VERBOSE, "USB suspend%s\n", is_vbus_present() + ? "" : "+disconnect"); + + if (!is_vbus_present()) + stop_activity(dev, dev->driver); + else if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->suspend) + dev->driver->suspend(&dev->gadget); + ep0_idle (dev); + } + + /* RESume Interrupt Request */ + if (unlikely(udccr & UDCCR_RESIR)) { + udc_ack_int_UDCCR(UDCCR_RESIR); + handled = 1; + DBG(DBG_VERBOSE, "USB resume\n"); + + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->resume + && is_vbus_present()) + dev->driver->resume(&dev->gadget); + } + + /* ReSeT Interrupt Request - USB reset */ + if (unlikely(udccr & UDCCR_RSTIR)) { + udc_ack_int_UDCCR(UDCCR_RSTIR); + handled = 1; + + if ((UDCCR & UDCCR_UDA) == 0) { + DBG(DBG_VERBOSE, "USB reset start\n"); + + /* reset driver and endpoints, + * in case that's not yet done + */ + stop_activity (dev, dev->driver); + + } else { + DBG(DBG_VERBOSE, "USB reset end\n"); + dev->gadget.speed = USB_SPEED_FULL; + LED_CONNECTED_ON; + memset(&dev->stats, 0, sizeof dev->stats); + /* driver and endpoints are still reset */ + } + + } else { + u32 usir0 = USIR0 & ~UICR0; + u32 usir1 = USIR1 & ~UICR1; + int i; + + if (unlikely (!usir0 && !usir1)) + continue; + + DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", usir1, usir0); + + /* control traffic */ + if (usir0 & USIR0_IR0) { + dev->ep[0].pio_irqs++; + handle_ep0(dev); + handled = 1; + } + + /* endpoint data transfers */ + for (i = 0; i < 8; i++) { + u32 tmp = 1 << i; + + if (i && (usir0 & tmp)) { + handle_ep(&dev->ep[i]); + USIR0 |= tmp; + handled = 1; + } + if (usir1 & tmp) { + handle_ep(&dev->ep[i+8]); + USIR1 |= tmp; + handled = 1; + } + } + } + + /* we could also ask for 1 msec SOF (SIR) interrupts */ + + } while (handled); + return IRQ_HANDLED; +} + +/*-------------------------------------------------------------------------*/ + +static void nop_release (struct device *dev) +{ + DMSG("%s %s\n", __FUNCTION__, dev->bus_id); +} + +/* this uses load-time allocation and initialization (instead of + * doing it at run-time) to save code, eliminate fault paths, and + * be more obviously correct. + */ +static struct pxa2xx_udc memory = { + .gadget = { + .ops = &pxa2xx_udc_ops, + .ep0 = &memory.ep[0].ep, + .name = driver_name, + .dev = { + .bus_id = "gadget", + .release = nop_release, + }, + }, + + /* control endpoint */ + .ep[0] = { + .ep = { + .name = ep0name, + .ops = &pxa2xx_ep_ops, + .maxpacket = EP0_FIFO_SIZE, + }, + .dev = &memory, + .reg_udccs = &UDCCS0, + .reg_uddr = &UDDR0, + }, + + /* first group of endpoints */ + .ep[1] = { + .ep = { + .name = "ep1in-bulk", + .ops = &pxa2xx_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 1, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS1, + .reg_uddr = &UDDR1, + drcmr (25) + }, + .ep[2] = { + .ep = { + .name = "ep2out-bulk", + .ops = &pxa2xx_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = 2, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS2, + .reg_ubcr = &UBCR2, + .reg_uddr = &UDDR2, + drcmr (26) + }, +#ifndef CONFIG_USB_PXA2XX_SMALL + .ep[3] = { + .ep = { + .name = "ep3in-iso", + .ops = &pxa2xx_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 3, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS3, + .reg_uddr = &UDDR3, + drcmr (27) + }, + .ep[4] = { + .ep = { + .name = "ep4out-iso", + .ops = &pxa2xx_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = 4, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS4, + .reg_ubcr = &UBCR4, + .reg_uddr = &UDDR4, + drcmr (28) + }, + .ep[5] = { + .ep = { + .name = "ep5in-int", + .ops = &pxa2xx_ep_ops, + .maxpacket = INT_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = INT_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 5, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .reg_udccs = &UDCCS5, + .reg_uddr = &UDDR5, + }, + + /* second group of endpoints */ + .ep[6] = { + .ep = { + .name = "ep6in-bulk", + .ops = &pxa2xx_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 6, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS6, + .reg_uddr = &UDDR6, + drcmr (30) + }, + .ep[7] = { + .ep = { + .name = "ep7out-bulk", + .ops = &pxa2xx_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = 7, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS7, + .reg_ubcr = &UBCR7, + .reg_uddr = &UDDR7, + drcmr (31) + }, + .ep[8] = { + .ep = { + .name = "ep8in-iso", + .ops = &pxa2xx_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 8, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS8, + .reg_uddr = &UDDR8, + drcmr (32) + }, + .ep[9] = { + .ep = { + .name = "ep9out-iso", + .ops = &pxa2xx_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = 9, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS9, + .reg_ubcr = &UBCR9, + .reg_uddr = &UDDR9, + drcmr (33) + }, + .ep[10] = { + .ep = { + .name = "ep10in-int", + .ops = &pxa2xx_ep_ops, + .maxpacket = INT_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = INT_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 10, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .reg_udccs = &UDCCS10, + .reg_uddr = &UDDR10, + }, + + /* third group of endpoints */ + .ep[11] = { + .ep = { + .name = "ep11in-bulk", + .ops = &pxa2xx_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 11, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS11, + .reg_uddr = &UDDR11, + drcmr (35) + }, + .ep[12] = { + .ep = { + .name = "ep12out-bulk", + .ops = &pxa2xx_ep_ops, + .maxpacket = BULK_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = BULK_FIFO_SIZE, + .bEndpointAddress = 12, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .reg_udccs = &UDCCS12, + .reg_ubcr = &UBCR12, + .reg_uddr = &UDDR12, + drcmr (36) + }, + .ep[13] = { + .ep = { + .name = "ep13in-iso", + .ops = &pxa2xx_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 13, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS13, + .reg_uddr = &UDDR13, + drcmr (37) + }, + .ep[14] = { + .ep = { + .name = "ep14out-iso", + .ops = &pxa2xx_ep_ops, + .maxpacket = ISO_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = ISO_FIFO_SIZE, + .bEndpointAddress = 14, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .reg_udccs = &UDCCS14, + .reg_ubcr = &UBCR14, + .reg_uddr = &UDDR14, + drcmr (38) + }, + .ep[15] = { + .ep = { + .name = "ep15in-int", + .ops = &pxa2xx_ep_ops, + .maxpacket = INT_FIFO_SIZE, + }, + .dev = &memory, + .fifo_size = INT_FIFO_SIZE, + .bEndpointAddress = USB_DIR_IN | 15, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .reg_udccs = &UDCCS15, + .reg_uddr = &UDDR15, + }, +#endif /* !CONFIG_USB_PXA2XX_SMALL */ +}; + +#define CP15R0_VENDOR_MASK 0xffffe000 + +#if defined(CONFIG_ARCH_PXA) +#define CP15R0_XSCALE_VALUE 0x69052000 /* intel/arm/xscale */ + +#elif defined(CONFIG_ARCH_IXP4XX) +#define CP15R0_XSCALE_VALUE 0x69054000 /* intel/arm/ixp4xx */ + +#endif + +#define CP15R0_PROD_MASK 0x000003f0 +#define PXA25x 0x00000100 /* and PXA26x */ +#define PXA210 0x00000120 + +#define CP15R0_REV_MASK 0x0000000f + +#define CP15R0_PRODREV_MASK (CP15R0_PROD_MASK | CP15R0_REV_MASK) + +#define PXA255_A0 0x00000106 /* or PXA260_B1 */ +#define PXA250_C0 0x00000105 /* or PXA26x_B0 */ +#define PXA250_B2 0x00000104 +#define PXA250_B1 0x00000103 /* or PXA260_A0 */ +#define PXA250_B0 0x00000102 +#define PXA250_A1 0x00000101 +#define PXA250_A0 0x00000100 + +#define PXA210_C0 0x00000125 +#define PXA210_B2 0x00000124 +#define PXA210_B1 0x00000123 +#define PXA210_B0 0x00000122 +#define IXP425_A0 0x000001c1 +#define IXP465_AD 0x00000200 + +/* + * probe - binds to the platform device + */ +static int __init pxa2xx_udc_probe(struct platform_device *pdev) +{ + struct pxa2xx_udc *dev = &memory; + int retval, out_dma = 1, vbus_irq; + u32 chiprev; + + /* insist on Intel/ARM/XScale */ + asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev)); + if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) { + printk(KERN_ERR "%s: not XScale!\n", driver_name); + return -ENODEV; + } + + /* trigger chiprev-specific logic */ + switch (chiprev & CP15R0_PRODREV_MASK) { +#if defined(CONFIG_ARCH_PXA) + case PXA255_A0: + dev->has_cfr = 1; + break; + case PXA250_A0: + case PXA250_A1: + /* A0/A1 "not released"; ep 13, 15 unusable */ + /* fall through */ + case PXA250_B2: case PXA210_B2: + case PXA250_B1: case PXA210_B1: + case PXA250_B0: case PXA210_B0: + out_dma = 0; + /* fall through */ + case PXA250_C0: case PXA210_C0: + break; +#elif defined(CONFIG_ARCH_IXP4XX) + case IXP425_A0: + case IXP465_AD: + dev->has_cfr = 1; + out_dma = 0; + break; +#endif + default: + out_dma = 0; + printk(KERN_ERR "%s: unrecognized processor: %08x\n", + driver_name, chiprev); + /* iop3xx, ixp4xx, ... */ + return -ENODEV; + } + + pr_debug("%s: IRQ %d%s%s%s\n", driver_name, IRQ_USB, + dev->has_cfr ? "" : " (!cfr)", + out_dma ? "" : " (broken dma-out)", + SIZE_STR DMASTR + ); + +#ifdef USE_DMA +#ifndef USE_OUT_DMA + out_dma = 0; +#endif + /* pxa 250 erratum 130 prevents using OUT dma (fixed C0) */ + if (!out_dma) { + DMSG("disabled OUT dma\n"); + dev->ep[ 2].reg_drcmr = dev->ep[ 4].reg_drcmr = 0; + dev->ep[ 7].reg_drcmr = dev->ep[ 9].reg_drcmr = 0; + dev->ep[12].reg_drcmr = dev->ep[14].reg_drcmr = 0; + } +#endif + + /* other non-static parts of init */ + dev->dev = &pdev->dev; + dev->mach = pdev->dev.platform_data; + if (dev->mach->gpio_vbus) { + vbus_irq = IRQ_GPIO(dev->mach->gpio_vbus & GPIO_MD_MASK_NR); + pxa_gpio_mode((dev->mach->gpio_vbus & GPIO_MD_MASK_NR) + | GPIO_IN); + set_irq_type(vbus_irq, IRQT_BOTHEDGE); + } else + vbus_irq = 0; + if (dev->mach->gpio_pullup) + pxa_gpio_mode((dev->mach->gpio_pullup & GPIO_MD_MASK_NR) + | GPIO_OUT | GPIO_DFLT_LOW); + + init_timer(&dev->timer); + dev->timer.function = udc_watchdog; + dev->timer.data = (unsigned long) dev; + + device_initialize(&dev->gadget.dev); + dev->gadget.dev.parent = &pdev->dev; + dev->gadget.dev.dma_mask = pdev->dev.dma_mask; + + the_controller = dev; + platform_set_drvdata(pdev, dev); + + udc_disable(dev); + udc_reinit(dev); + + dev->vbus = is_vbus_present(); + + /* irq setup after old hardware state is cleaned up */ + retval = request_irq(IRQ_USB, pxa2xx_udc_irq, + IRQF_DISABLED, driver_name, dev); + if (retval != 0) { + printk(KERN_ERR "%s: can't get irq %i, err %d\n", + driver_name, IRQ_USB, retval); + return -EBUSY; + } + dev->got_irq = 1; + +#ifdef CONFIG_ARCH_LUBBOCK + if (machine_is_lubbock()) { + retval = request_irq(LUBBOCK_USB_DISC_IRQ, + lubbock_vbus_irq, + IRQF_DISABLED | IRQF_SAMPLE_RANDOM, + driver_name, dev); + if (retval != 0) { + printk(KERN_ERR "%s: can't get irq %i, err %d\n", + driver_name, LUBBOCK_USB_DISC_IRQ, retval); +lubbock_fail0: + free_irq(IRQ_USB, dev); + return -EBUSY; + } + retval = request_irq(LUBBOCK_USB_IRQ, + lubbock_vbus_irq, + IRQF_DISABLED | IRQF_SAMPLE_RANDOM, + driver_name, dev); + if (retval != 0) { + printk(KERN_ERR "%s: can't get irq %i, err %d\n", + driver_name, LUBBOCK_USB_IRQ, retval); + free_irq(LUBBOCK_USB_DISC_IRQ, dev); + goto lubbock_fail0; + } +#ifdef DEBUG + /* with U-Boot (but not BLOB), hex is off by default */ + HEX_DISPLAY(dev->stats.irqs); + LUB_DISC_BLNK_LED &= 0xff; +#endif + } else +#endif + if (vbus_irq) { + retval = request_irq(vbus_irq, udc_vbus_irq, + SA_INTERRUPT | SA_SAMPLE_RANDOM, + driver_name, dev); + if (retval != 0) { + printk(KERN_ERR "%s: can't get irq %i, err %d\n", + driver_name, vbus_irq, retval); + free_irq(IRQ_USB, dev); + return -EBUSY; + } + } + create_proc_files(); + + return 0; +} + +static void pxa2xx_udc_shutdown(struct platform_device *_dev) +{ + pullup_off(); +} + +static int __exit pxa2xx_udc_remove(struct platform_device *pdev) +{ + struct pxa2xx_udc *dev = platform_get_drvdata(pdev); + + udc_disable(dev); + remove_proc_files(); + usb_gadget_unregister_driver(dev->driver); + + if (dev->got_irq) { + free_irq(IRQ_USB, dev); + dev->got_irq = 0; + } +#ifdef CONFIG_ARCH_LUBBOCK + if (machine_is_lubbock()) { + free_irq(LUBBOCK_USB_DISC_IRQ, dev); + free_irq(LUBBOCK_USB_IRQ, dev); + } +#endif + if (dev->mach->gpio_vbus) + free_irq(IRQ_GPIO(dev->mach->gpio_vbus), dev); + platform_set_drvdata(pdev, NULL); + the_controller = NULL; + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM + +/* USB suspend (controlled by the host) and system suspend (controlled + * by the PXA) don't necessarily work well together. If USB is active, + * the 48 MHz clock is required; so the system can't enter 33 MHz idle + * mode, or any deeper PM saving state. + * + * For now, we punt and forcibly disconnect from the USB host when PXA + * enters any suspend state. While we're disconnected, we always disable + * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states. + * Boards without software pullup control shouldn't use those states. + * VBUS IRQs should probably be ignored so that the PXA device just acts + * "dead" to USB hosts until system resume. + */ +static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state) +{ + struct pxa2xx_udc *udc = platform_get_drvdata(dev); + + if (!udc->mach->udc_command) + WARN("USB host won't detect disconnect!\n"); + pullup(udc, 0); + + return 0; +} + +static int pxa2xx_udc_resume(struct platform_device *dev) +{ + struct pxa2xx_udc *udc = platform_get_drvdata(dev); + + pullup(udc, 1); + + return 0; +} + +#else +#define pxa2xx_udc_suspend NULL +#define pxa2xx_udc_resume NULL +#endif + +/*-------------------------------------------------------------------------*/ + +static struct platform_driver udc_driver = { + .probe = pxa2xx_udc_probe, + .shutdown = pxa2xx_udc_shutdown, + .remove = __exit_p(pxa2xx_udc_remove), + .suspend = pxa2xx_udc_suspend, + .resume = pxa2xx_udc_resume, + .driver = { + .owner = THIS_MODULE, + .name = "pxa2xx-udc", + }, +}; + +static int __init udc_init(void) +{ + printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION); + return platform_driver_register(&udc_driver); +} +module_init(udc_init); + +static void __exit udc_exit(void) +{ + platform_driver_unregister(&udc_driver); +} +module_exit(udc_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell"); +MODULE_LICENSE("GPL"); + -- cgit v1.2.3