From 5deb3317cb51ac52de922bb55f8492624018906d Mon Sep 17 00:00:00 2001 From: Roman Yeryomin Date: Thu, 13 Sep 2012 00:40:35 +0300 Subject: Add realtek target files Signed-off-by: Roman Yeryomin --- .../files/drivers/usb/gadget_cathy/net2280.c | 3066 ++++++++++++++++++++ 1 file changed, 3066 insertions(+) create mode 100644 target/linux/realtek/files/drivers/usb/gadget_cathy/net2280.c (limited to 'target/linux/realtek/files/drivers/usb/gadget_cathy/net2280.c') diff --git a/target/linux/realtek/files/drivers/usb/gadget_cathy/net2280.c b/target/linux/realtek/files/drivers/usb/gadget_cathy/net2280.c new file mode 100644 index 000000000..3acc896a5 --- /dev/null +++ b/target/linux/realtek/files/drivers/usb/gadget_cathy/net2280.c @@ -0,0 +1,3066 @@ +/* + * Driver for the PLX NET2280 USB device controller. + * Specs and errata are available from . + * + * PLX Technology Inc. (formerly NetChip Technology) supported the + * development of this driver. + * + * + * CODE STATUS HIGHLIGHTS + * + * This driver should work well with most "gadget" drivers, including + * the File Storage, Serial, and Ethernet/RNDIS gadget drivers + * as well as Gadget Zero and Gadgetfs. + * + * DMA is enabled by default. Drivers using transfer queues might use + * DMA chaining to remove IRQ latencies between transfers. (Except when + * short OUT transfers happen.) Drivers can use the req->no_interrupt + * hint to completely eliminate some IRQs, if a later IRQ is guaranteed + * and DMA chaining is enabled. + * + * Note that almost all the errata workarounds here are only needed for + * rev1 chips. Rev1a silicon (0110) fixes almost all of them. + */ + +/* + * Copyright (C) 2003 David Brownell + * Copyright (C) 2003-2005 PLX Technology, Inc. + * + * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility + * with 2282 chip + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#undef DEBUG /* messages on error and most fault paths */ +#undef VERBOSE /* extra debug messages (success too) */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + + +#define DRIVER_DESC "PLX NET228x USB Peripheral Controller" +#define DRIVER_VERSION "2005 Sept 27" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) +#define EP_DONTUSE 13 /* nonzero */ + +#define USE_RDK_LEDS /* GPIO pins control three LEDs */ + + +static const char driver_name [] = "net2280"; +static const char driver_desc [] = DRIVER_DESC; + +static const char ep0name [] = "ep0"; +static const char *const ep_name [] = { + ep0name, + "ep-a", "ep-b", "ep-c", "ep-d", + "ep-e", "ep-f", +}; + +/* use_dma -- general goodness, fewer interrupts, less cpu load (vs PIO) + * use_dma_chaining -- dma descriptor queueing gives even more irq reduction + * + * The net2280 DMA engines are not tightly integrated with their FIFOs; + * not all cases are (yet) handled well in this driver or the silicon. + * Some gadget drivers work better with the dma support here than others. + * These two parameters let you use PIO or more aggressive DMA. + */ +static int use_dma = 1; +static int use_dma_chaining = 0; + +/* "modprobe net2280 use_dma=n" etc */ +module_param (use_dma, bool, S_IRUGO); +module_param (use_dma_chaining, bool, S_IRUGO); + + +/* mode 0 == ep-{a,b,c,d} 1K fifo each + * mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable + * mode 2 == ep-a 2K fifo, ep-{b,c} 1K each, ep-d unavailable + */ +static ushort fifo_mode = 0; + +/* "modprobe net2280 fifo_mode=1" etc */ +module_param (fifo_mode, ushort, 0644); + +/* enable_suspend -- When enabled, the driver will respond to + * USB suspend requests by powering down the NET2280. Otherwise, + * USB suspend requests will be ignored. This is acceptible for + * self-powered devices + */ +static int enable_suspend = 0; + +/* "modprobe net2280 enable_suspend=1" etc */ +module_param (enable_suspend, bool, S_IRUGO); + + +#define DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out") + +#if defined(CONFIG_USB_GADGET_DEBUG_FILES) || defined (DEBUG) +static char *type_string (u8 bmAttributes) +{ + switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: return "bulk"; + case USB_ENDPOINT_XFER_ISOC: return "iso"; + case USB_ENDPOINT_XFER_INT: return "intr"; + }; + return "control"; +} +#endif + +#include "net2280.h" + +#define valid_bit __constant_cpu_to_le32 (1 << VALID_BIT) +#define dma_done_ie __constant_cpu_to_le32 (1 << DMA_DONE_INTERRUPT_ENABLE) + +/*-------------------------------------------------------------------------*/ + +static int +net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct net2280 *dev; + struct net2280_ep *ep; + u32 max, tmp; + unsigned long flags; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + /* erratum 0119 workaround ties up an endpoint number */ + if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE) + return -EDOM; + + /* sanity check ep-e/ep-f since their fifos are small */ + max = le16_to_cpu (desc->wMaxPacketSize) & 0x1fff; + if (ep->num > 4 && max > 64) + return -ERANGE; + + spin_lock_irqsave (&dev->lock, flags); + _ep->maxpacket = max & 0x7ff; + ep->desc = desc; + + /* ep_reset() has already been called */ + ep->stopped = 0; + ep->out_overflow = 0; + + /* set speed-dependent max packet; may kick in high bandwidth */ + set_idx_reg (dev->regs, REG_EP_MAXPKT (dev, ep->num), max); + + /* FIFO lines can't go to different packets. PIO is ok, so + * use it instead of troublesome (non-bulk) multi-packet DMA. + */ + if (ep->dma && (max % 4) != 0 && use_dma_chaining) { + DEBUG (ep->dev, "%s, no dma for maxpacket %d\n", + ep->ep.name, ep->ep.maxpacket); + ep->dma = NULL; + } + + /* set type, direction, address; reset fifo counters */ + writel ((1 << FIFO_FLUSH), &ep->regs->ep_stat); + tmp = (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); + if (tmp == USB_ENDPOINT_XFER_INT) { + /* erratum 0105 workaround prevents hs NYET */ + if (dev->chiprev == 0100 + && dev->gadget.speed == USB_SPEED_HIGH + && !(desc->bEndpointAddress & USB_DIR_IN)) + writel ((1 << CLEAR_NAK_OUT_PACKETS_MODE), + &ep->regs->ep_rsp); + } else if (tmp == USB_ENDPOINT_XFER_BULK) { + /* catch some particularly blatant driver bugs */ + if ((dev->gadget.speed == USB_SPEED_HIGH + && max != 512) + || (dev->gadget.speed == USB_SPEED_FULL + && max > 64)) { + spin_unlock_irqrestore (&dev->lock, flags); + return -ERANGE; + } + } + ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC) ? 1 : 0; + tmp <<= ENDPOINT_TYPE; + tmp |= desc->bEndpointAddress; + tmp |= (4 << ENDPOINT_BYTE_COUNT); /* default full fifo lines */ + tmp |= 1 << ENDPOINT_ENABLE; + wmb (); + + /* for OUT transfers, block the rx fifo until a read is posted */ + ep->is_in = (tmp & USB_DIR_IN) != 0; + if (!ep->is_in) + writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); + else if (dev->pdev->device != 0x2280) { + /* Added for 2282, Don't use nak packets on an in endpoint, + * this was ignored on 2280 + */ + writel ((1 << CLEAR_NAK_OUT_PACKETS) + | (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp); + } + + writel (tmp, &ep->regs->ep_cfg); + + /* enable irqs */ + if (!ep->dma) { /* pio, per-packet */ + tmp = (1 << ep->num) | readl (&dev->regs->pciirqenb0); + writel (tmp, &dev->regs->pciirqenb0); + + tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE); + if (dev->pdev->device == 0x2280) + tmp |= readl (&ep->regs->ep_irqenb); + writel (tmp, &ep->regs->ep_irqenb); + } else { /* dma, per-request */ + tmp = (1 << (8 + ep->num)); /* completion */ + tmp |= readl (&dev->regs->pciirqenb1); + writel (tmp, &dev->regs->pciirqenb1); + + /* for short OUT transfers, dma completions can't + * advance the queue; do it pio-style, by hand. + * NOTE erratum 0112 workaround #2 + */ + if ((desc->bEndpointAddress & USB_DIR_IN) == 0) { + tmp = (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE); + writel (tmp, &ep->regs->ep_irqenb); + + tmp = (1 << ep->num) | readl (&dev->regs->pciirqenb0); + writel (tmp, &dev->regs->pciirqenb0); + } + } + + tmp = desc->bEndpointAddress; + DEBUG (dev, "enabled %s (ep%d%s-%s) %s max %04x\n", + _ep->name, tmp & 0x0f, DIR_STRING (tmp), + type_string (desc->bmAttributes), + ep->dma ? "dma" : "pio", max); + + /* pci writes may still be posted */ + spin_unlock_irqrestore (&dev->lock, flags); + return 0; +} + +static int handshake (u32 __iomem *ptr, u32 mask, u32 done, int usec) +{ + u32 result; + + do { + result = readl (ptr); + if (result == ~(u32)0) /* "device unplugged" */ + return -ENODEV; + result &= mask; + if (result == done) + return 0; + udelay (1); + usec--; + } while (usec > 0); + return -ETIMEDOUT; +} + +static const struct usb_ep_ops net2280_ep_ops; + +static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) +{ + u32 tmp; + + ep->desc = NULL; + INIT_LIST_HEAD (&ep->queue); + + ep->ep.maxpacket = ~0; + ep->ep.ops = &net2280_ep_ops; + + /* disable the dma, irqs, endpoint... */ + if (ep->dma) { + writel (0, &ep->dma->dmactl); + writel ( (1 << DMA_SCATTER_GATHER_DONE_INTERRUPT) + | (1 << DMA_TRANSACTION_DONE_INTERRUPT) + | (1 << DMA_ABORT) + , &ep->dma->dmastat); + + tmp = readl (®s->pciirqenb0); + tmp &= ~(1 << ep->num); + writel (tmp, ®s->pciirqenb0); + } else { + tmp = readl (®s->pciirqenb1); + tmp &= ~(1 << (8 + ep->num)); /* completion */ + writel (tmp, ®s->pciirqenb1); + } + writel (0, &ep->regs->ep_irqenb); + + /* init to our chosen defaults, notably so that we NAK OUT + * packets until the driver queues a read (+note erratum 0112) + */ + if (!ep->is_in || ep->dev->pdev->device == 0x2280) { + tmp = (1 << SET_NAK_OUT_PACKETS_MODE) + | (1 << SET_NAK_OUT_PACKETS) + | (1 << CLEAR_EP_HIDE_STATUS_PHASE) + | (1 << CLEAR_INTERRUPT_MODE); + } else { + /* added for 2282 */ + tmp = (1 << CLEAR_NAK_OUT_PACKETS_MODE) + | (1 << CLEAR_NAK_OUT_PACKETS) + | (1 << CLEAR_EP_HIDE_STATUS_PHASE) + | (1 << CLEAR_INTERRUPT_MODE); + } + + if (ep->num != 0) { + tmp |= (1 << CLEAR_ENDPOINT_TOGGLE) + | (1 << CLEAR_ENDPOINT_HALT); + } + writel (tmp, &ep->regs->ep_rsp); + + /* scrub most status bits, and flush any fifo state */ + if (ep->dev->pdev->device == 0x2280) + tmp = (1 << FIFO_OVERFLOW) + | (1 << FIFO_UNDERFLOW); + else + tmp = 0; + + writel (tmp | (1 << TIMEOUT) + | (1 << USB_STALL_SENT) + | (1 << USB_IN_NAK_SENT) + | (1 << USB_IN_ACK_RCVD) + | (1 << USB_OUT_PING_NAK_SENT) + | (1 << USB_OUT_ACK_SENT) + | (1 << FIFO_FLUSH) + | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT) + | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) + | (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + | (1 << DATA_IN_TOKEN_INTERRUPT) + , &ep->regs->ep_stat); + + /* fifo size is handled separately */ +} + +static void nuke (struct net2280_ep *); + +static int net2280_disable (struct usb_ep *_ep) +{ + struct net2280_ep *ep; + unsigned long flags; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || !ep->desc || _ep->name == ep0name) + return -EINVAL; + + spin_lock_irqsave (&ep->dev->lock, flags); + nuke (ep); + ep_reset (ep->dev->regs, ep); + + VDEBUG (ep->dev, "disabled %s %s\n", + ep->dma ? "dma" : "pio", _ep->name); + + /* synch memory views with the device */ + (void) readl (&ep->regs->ep_cfg); + + if (use_dma && !ep->dma && ep->num >= 1 && ep->num <= 4) + ep->dma = &ep->dev->dma [ep->num - 1]; + + spin_unlock_irqrestore (&ep->dev->lock, flags); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_request * +net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct net2280_ep *ep; + struct net2280_request *req; + + if (!_ep) + return NULL; + ep = container_of (_ep, struct net2280_ep, ep); + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + req->req.dma = DMA_ADDR_INVALID; + INIT_LIST_HEAD (&req->queue); + + /* this dma descriptor may be swapped with the previous dummy */ + if (ep->dma) { + struct net2280_dma *td; + + td = pci_pool_alloc (ep->dev->requests, gfp_flags, + &req->td_dma); + if (!td) { + kfree (req); + return NULL; + } + td->dmacount = 0; /* not VALID */ + td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID); + td->dmadesc = td->dmaaddr; + req->td = td; + } + return &req->req; +} + +static void +net2280_free_request (struct usb_ep *_ep, struct usb_request *_req) +{ + struct net2280_ep *ep; + struct net2280_request *req; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || !_req) + return; + + req = container_of (_req, struct net2280_request, req); + WARN_ON (!list_empty (&req->queue)); + if (req->td) + pci_pool_free (ep->dev->requests, req->td, req->td_dma); + kfree (req); +} + +/*-------------------------------------------------------------------------*/ + +/* + * dma-coherent memory allocation (for dma-capable endpoints) + * + * NOTE: the dma_*_coherent() API calls suck. Most implementations are + * (a) page-oriented, so small buffers lose big; and (b) asymmetric with + * respect to calls with irqs disabled: alloc is safe, free is not. + * We currently work around (b), but not (a). + */ + +static void * +net2280_alloc_buffer ( + struct usb_ep *_ep, + unsigned bytes, + dma_addr_t *dma, + gfp_t gfp_flags +) +{ + void *retval; + struct net2280_ep *ep; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep) + return NULL; + *dma = DMA_ADDR_INVALID; + + if (ep->dma) + retval = dma_alloc_coherent(&ep->dev->pdev->dev, + bytes, dma, gfp_flags); + else + retval = kmalloc(bytes, gfp_flags); + return retval; +} + +static DEFINE_SPINLOCK(buflock); +static LIST_HEAD(buffers); + +struct free_record { + struct list_head list; + struct device *dev; + unsigned bytes; + dma_addr_t dma; +}; + +static void do_free(unsigned long ignored) +{ + spin_lock_irq(&buflock); + while (!list_empty(&buffers)) { + struct free_record *buf; + + buf = list_entry(buffers.next, struct free_record, list); + list_del(&buf->list); + spin_unlock_irq(&buflock); + + dma_free_coherent(buf->dev, buf->bytes, buf, buf->dma); + + spin_lock_irq(&buflock); + } + spin_unlock_irq(&buflock); +} + +static DECLARE_TASKLET(deferred_free, do_free, 0); + +static void +net2280_free_buffer ( + struct usb_ep *_ep, + void *address, + dma_addr_t dma, + unsigned bytes +) { + /* free memory into the right allocator */ + if (dma != DMA_ADDR_INVALID) { + struct net2280_ep *ep; + struct free_record *buf = address; + unsigned long flags; + + ep = container_of(_ep, struct net2280_ep, ep); + if (!_ep) + return; + + ep = container_of (_ep, struct net2280_ep, ep); + buf->dev = &ep->dev->pdev->dev; + buf->bytes = bytes; + buf->dma = dma; + + spin_lock_irqsave(&buflock, flags); + list_add_tail(&buf->list, &buffers); + tasklet_schedule(&deferred_free); + spin_unlock_irqrestore(&buflock, flags); + } else + kfree (address); +} + +/*-------------------------------------------------------------------------*/ + +/* load a packet into the fifo we use for usb IN transfers. + * works for all endpoints. + * + * NOTE: pio with ep-a..ep-d could stuff multiple packets into the fifo + * at a time, but this code is simpler because it knows it only writes + * one packet. ep-a..ep-d should use dma instead. + */ +static void +write_fifo (struct net2280_ep *ep, struct usb_request *req) +{ + struct net2280_ep_regs __iomem *regs = ep->regs; + u8 *buf; + u32 tmp; + unsigned count, total; + + /* INVARIANT: fifo is currently empty. (testable) */ + + if (req) { + buf = req->buf + req->actual; + prefetch (buf); + total = req->length - req->actual; + } else { + total = 0; + buf = NULL; + } + + /* write just one packet at a time */ + count = ep->ep.maxpacket; + if (count > total) /* min() cannot be used on a bitfield */ + count = total; + + VDEBUG (ep->dev, "write %s fifo (IN) %d bytes%s req %p\n", + ep->ep.name, count, + (count != ep->ep.maxpacket) ? " (short)" : "", + req); + while (count >= 4) { + /* NOTE be careful if you try to align these. fifo lines + * should normally be full (4 bytes) and successive partial + * lines are ok only in certain cases. + */ + tmp = get_unaligned ((u32 *)buf); + cpu_to_le32s (&tmp); + writel (tmp, ®s->ep_data); + buf += 4; + count -= 4; + } + + /* last fifo entry is "short" unless we wrote a full packet. + * also explicitly validate last word in (periodic) transfers + * when maxpacket is not a multiple of 4 bytes. + */ + if (count || total < ep->ep.maxpacket) { + tmp = count ? get_unaligned ((u32 *)buf) : count; + cpu_to_le32s (&tmp); + set_fifo_bytecount (ep, count & 0x03); + writel (tmp, ®s->ep_data); + } + + /* pci writes may still be posted */ +} + +/* work around erratum 0106: PCI and USB race over the OUT fifo. + * caller guarantees chiprev 0100, out endpoint is NAKing, and + * there's no real data in the fifo. + * + * NOTE: also used in cases where that erratum doesn't apply: + * where the host wrote "too much" data to us. + */ +static void out_flush (struct net2280_ep *ep) +{ + u32 __iomem *statp; + u32 tmp; + + ASSERT_OUT_NAKING (ep); + + statp = &ep->regs->ep_stat; + writel ( (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT) + , statp); + writel ((1 << FIFO_FLUSH), statp); + mb (); + tmp = readl (statp); + if (tmp & (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + /* high speed did bulk NYET; fifo isn't filling */ + && ep->dev->gadget.speed == USB_SPEED_FULL) { + unsigned usec; + + usec = 50; /* 64 byte bulk/interrupt */ + handshake (statp, (1 << USB_OUT_PING_NAK_SENT), + (1 << USB_OUT_PING_NAK_SENT), usec); + /* NAK done; now CLEAR_NAK_OUT_PACKETS is safe */ + } +} + +/* unload packet(s) from the fifo we use for usb OUT transfers. + * returns true iff the request completed, because of short packet + * or the request buffer having filled with full packets. + * + * for ep-a..ep-d this will read multiple packets out when they + * have been accepted. + */ +static int +read_fifo (struct net2280_ep *ep, struct net2280_request *req) +{ + struct net2280_ep_regs __iomem *regs = ep->regs; + u8 *buf = req->req.buf + req->req.actual; + unsigned count, tmp, is_short; + unsigned cleanup = 0, prevent = 0; + + /* erratum 0106 ... packets coming in during fifo reads might + * be incompletely rejected. not all cases have workarounds. + */ + if (ep->dev->chiprev == 0x0100 + && ep->dev->gadget.speed == USB_SPEED_FULL) { + udelay (1); + tmp = readl (&ep->regs->ep_stat); + if ((tmp & (1 << NAK_OUT_PACKETS))) + cleanup = 1; + else if ((tmp & (1 << FIFO_FULL))) { + start_out_naking (ep); + prevent = 1; + } + /* else: hope we don't see the problem */ + } + + /* never overflow the rx buffer. the fifo reads packets until + * it sees a short one; we might not be ready for them all. + */ + prefetchw (buf); + count = readl (®s->ep_avail); + if (unlikely (count == 0)) { + udelay (1); + tmp = readl (&ep->regs->ep_stat); + count = readl (®s->ep_avail); + /* handled that data already? */ + if (count == 0 && (tmp & (1 << NAK_OUT_PACKETS)) == 0) + return 0; + } + + tmp = req->req.length - req->req.actual; + if (count > tmp) { + /* as with DMA, data overflow gets flushed */ + if ((tmp % ep->ep.maxpacket) != 0) { + ERROR (ep->dev, + "%s out fifo %d bytes, expected %d\n", + ep->ep.name, count, tmp); + req->req.status = -EOVERFLOW; + cleanup = 1; + /* NAK_OUT_PACKETS will be set, so flushing is safe; + * the next read will start with the next packet + */ + } /* else it's a ZLP, no worries */ + count = tmp; + } + req->req.actual += count; + + is_short = (count == 0) || ((count % ep->ep.maxpacket) != 0); + + VDEBUG (ep->dev, "read %s fifo (OUT) %d bytes%s%s%s req %p %d/%d\n", + ep->ep.name, count, is_short ? " (short)" : "", + cleanup ? " flush" : "", prevent ? " nak" : "", + req, req->req.actual, req->req.length); + + while (count >= 4) { + tmp = readl (®s->ep_data); + cpu_to_le32s (&tmp); + put_unaligned (tmp, (u32 *)buf); + buf += 4; + count -= 4; + } + if (count) { + tmp = readl (®s->ep_data); + /* LE conversion is implicit here: */ + do { + *buf++ = (u8) tmp; + tmp >>= 8; + } while (--count); + } + if (cleanup) + out_flush (ep); + if (prevent) { + writel ((1 << CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp); + (void) readl (&ep->regs->ep_rsp); + } + + return is_short || ((req->req.actual == req->req.length) + && !req->req.zero); +} + +/* fill out dma descriptor to match a given request */ +static void +fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid) +{ + struct net2280_dma *td = req->td; + u32 dmacount = req->req.length; + + /* don't let DMA continue after a short OUT packet, + * so overruns can't affect the next transfer. + * in case of overruns on max-size packets, we can't + * stop the fifo from filling but we can flush it. + */ + if (ep->is_in) + dmacount |= (1 << DMA_DIRECTION); + if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) + || ep->dev->pdev->device != 0x2280) + dmacount |= (1 << END_OF_CHAIN); + + req->valid = valid; + if (valid) + dmacount |= (1 << VALID_BIT); + if (likely(!req->req.no_interrupt || !use_dma_chaining)) + dmacount |= (1 << DMA_DONE_INTERRUPT_ENABLE); + + /* td->dmadesc = previously set by caller */ + td->dmaaddr = cpu_to_le32 (req->req.dma); + + /* 2280 may be polling VALID_BIT through ep->dma->dmadesc */ + wmb (); + td->dmacount = cpu_to_le32p (&dmacount); +} + +static const u32 dmactl_default = + (1 << DMA_SCATTER_GATHER_DONE_INTERRUPT) + | (1 << DMA_CLEAR_COUNT_ENABLE) + /* erratum 0116 workaround part 1 (use POLLING) */ + | (POLL_100_USEC << DESCRIPTOR_POLLING_RATE) + | (1 << DMA_VALID_BIT_POLLING_ENABLE) + | (1 << DMA_VALID_BIT_ENABLE) + | (1 << DMA_SCATTER_GATHER_ENABLE) + /* erratum 0116 workaround part 2 (no AUTOSTART) */ + | (1 << DMA_ENABLE); + +static inline void spin_stop_dma (struct net2280_dma_regs __iomem *dma) +{ + handshake (&dma->dmactl, (1 << DMA_ENABLE), 0, 50); +} + +static inline void stop_dma (struct net2280_dma_regs __iomem *dma) +{ + writel (readl (&dma->dmactl) & ~(1 << DMA_ENABLE), &dma->dmactl); + spin_stop_dma (dma); +} + +static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma) +{ + struct net2280_dma_regs __iomem *dma = ep->dma; + unsigned int tmp = (1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION); + + if (ep->dev->pdev->device != 0x2280) + tmp |= (1 << END_OF_CHAIN); + + writel (tmp, &dma->dmacount); + writel (readl (&dma->dmastat), &dma->dmastat); + + writel (td_dma, &dma->dmadesc); + writel (dmactl, &dma->dmactl); + + /* erratum 0116 workaround part 3: pci arbiter away from net2280 */ + (void) readl (&ep->dev->pci->pcimstctl); + + writel ((1 << DMA_START), &dma->dmastat); + + if (!ep->is_in) + stop_out_naking (ep); +} + +static void start_dma (struct net2280_ep *ep, struct net2280_request *req) +{ + u32 tmp; + struct net2280_dma_regs __iomem *dma = ep->dma; + + /* FIXME can't use DMA for ZLPs */ + + /* on this path we "know" there's no dma active (yet) */ + WARN_ON (readl (&dma->dmactl) & (1 << DMA_ENABLE)); + writel (0, &ep->dma->dmactl); + + /* previous OUT packet might have been short */ + if (!ep->is_in && ((tmp = readl (&ep->regs->ep_stat)) + & (1 << NAK_OUT_PACKETS)) != 0) { + writel ((1 << SHORT_PACKET_TRANSFERRED_INTERRUPT), + &ep->regs->ep_stat); + + tmp = readl (&ep->regs->ep_avail); + if (tmp) { + writel (readl (&dma->dmastat), &dma->dmastat); + + /* transfer all/some fifo data */ + writel (req->req.dma, &dma->dmaaddr); + tmp = min (tmp, req->req.length); + + /* dma irq, faking scatterlist status */ + req->td->dmacount = cpu_to_le32 (req->req.length - tmp); + writel ((1 << DMA_DONE_INTERRUPT_ENABLE) + | tmp, &dma->dmacount); + req->td->dmadesc = 0; + req->valid = 1; + + writel ((1 << DMA_ENABLE), &dma->dmactl); + writel ((1 << DMA_START), &dma->dmastat); + return; + } + } + + tmp = dmactl_default; + + /* force packet boundaries between dma requests, but prevent the + * controller from automagically writing a last "short" packet + * (zero length) unless the driver explicitly said to do that. + */ + if (ep->is_in) { + if (likely ((req->req.length % ep->ep.maxpacket) != 0 + || req->req.zero)) { + tmp |= (1 << DMA_FIFO_VALIDATE); + ep->in_fifo_validate = 1; + } else + ep->in_fifo_validate = 0; + } + + /* init req->td, pointing to the current dummy */ + req->td->dmadesc = cpu_to_le32 (ep->td_dma); + fill_dma_desc (ep, req, 1); + + if (!use_dma_chaining) + req->td->dmacount |= __constant_cpu_to_le32 (1 << END_OF_CHAIN); + + start_queue (ep, tmp, req->td_dma); +} + +static inline void +queue_dma (struct net2280_ep *ep, struct net2280_request *req, int valid) +{ + struct net2280_dma *end; + dma_addr_t tmp; + + /* swap new dummy for old, link; fill and maybe activate */ + end = ep->dummy; + ep->dummy = req->td; + req->td = end; + + tmp = ep->td_dma; + ep->td_dma = req->td_dma; + req->td_dma = tmp; + + end->dmadesc = cpu_to_le32 (ep->td_dma); + + fill_dma_desc (ep, req, valid); +} + +static void +done (struct net2280_ep *ep, struct net2280_request *req, int status) +{ + struct net2280 *dev; + unsigned stopped = ep->stopped; + + list_del_init (&req->queue); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + dev = ep->dev; + if (req->mapped) { + pci_unmap_single (dev->pdev, req->req.dma, req->req.length, + ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); + req->req.dma = DMA_ADDR_INVALID; + req->mapped = 0; + } + + if (status && status != -ESHUTDOWN) + VDEBUG (dev, "complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + spin_unlock (&dev->lock); + req->req.complete (&ep->ep, &req->req); + spin_lock (&dev->lock); + ep->stopped = stopped; +} + +/*-------------------------------------------------------------------------*/ + +static int +net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct net2280_request *req; + struct net2280_ep *ep; + struct net2280 *dev; + unsigned long flags; + + /* we always require a cpu-view buffer, so that we can + * always use pio (as fallback or whatever). + */ + req = container_of (_req, struct net2280_request, req); + if (!_req || !_req->complete || !_req->buf + || !list_empty (&req->queue)) + return -EINVAL; + if (_req->length > (~0 & DMA_BYTE_COUNT_MASK)) + return -EDOM; + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return -EINVAL; + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + /* FIXME implement PIO fallback for ZLPs with DMA */ + if (ep->dma && _req->length == 0) + return -EOPNOTSUPP; + + /* set up dma mapping in case the caller didn't */ + if (ep->dma && _req->dma == DMA_ADDR_INVALID) { + _req->dma = pci_map_single (dev->pdev, _req->buf, _req->length, + ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); + req->mapped = 1; + } + +#if 0 + VDEBUG (dev, "%s queue req %p, len %d buf %p\n", + _ep->name, _req, _req->length, _req->buf); +#endif + + spin_lock_irqsave (&dev->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* kickstart this i/o queue? */ + if (list_empty (&ep->queue) && !ep->stopped) { + /* use DMA if the endpoint supports it, else pio */ + if (ep->dma) + start_dma (ep, req); + else { + /* maybe there's no control data, just status ack */ + if (ep->num == 0 && _req->length == 0) { + allow_status (ep); + done (ep, req, 0); + VDEBUG (dev, "%s status ack\n", ep->ep.name); + goto done; + } + + /* PIO ... stuff the fifo, or unblock it. */ + if (ep->is_in) + write_fifo (ep, _req); + else if (list_empty (&ep->queue)) { + u32 s; + + /* OUT FIFO might have packet(s) buffered */ + s = readl (&ep->regs->ep_stat); + if ((s & (1 << FIFO_EMPTY)) == 0) { + /* note: _req->short_not_ok is + * ignored here since PIO _always_ + * stops queue advance here, and + * _req->status doesn't change for + * short reads (only _req->actual) + */ + if (read_fifo (ep, req)) { + done (ep, req, 0); + if (ep->num == 0) + allow_status (ep); + /* don't queue it */ + req = NULL; + } else + s = readl (&ep->regs->ep_stat); + } + + /* don't NAK, let the fifo fill */ + if (req && (s & (1 << NAK_OUT_PACKETS))) + writel ((1 << CLEAR_NAK_OUT_PACKETS), + &ep->regs->ep_rsp); + } + } + + } else if (ep->dma) { + int valid = 1; + + if (ep->is_in) { + int expect; + + /* preventing magic zlps is per-engine state, not + * per-transfer; irq logic must recover hiccups. + */ + expect = likely (req->req.zero + || (req->req.length % ep->ep.maxpacket) != 0); + if (expect != ep->in_fifo_validate) + valid = 0; + } + queue_dma (ep, req, valid); + + } /* else the irq handler advances the queue. */ + + if (req) + list_add_tail (&req->queue, &ep->queue); +done: + spin_unlock_irqrestore (&dev->lock, flags); + + /* pci writes may still be posted */ + return 0; +} + +static inline void +dma_done ( + struct net2280_ep *ep, + struct net2280_request *req, + u32 dmacount, + int status +) +{ + req->req.actual = req->req.length - (DMA_BYTE_COUNT_MASK & dmacount); + done (ep, req, status); +} + +static void restart_dma (struct net2280_ep *ep); + +static void scan_dma_completions (struct net2280_ep *ep) +{ + /* only look at descriptors that were "naturally" retired, + * so fifo and list head state won't matter + */ + while (!list_empty (&ep->queue)) { + struct net2280_request *req; + u32 tmp; + + req = list_entry (ep->queue.next, + struct net2280_request, queue); + if (!req->valid) + break; + rmb (); + tmp = le32_to_cpup (&req->td->dmacount); + if ((tmp & (1 << VALID_BIT)) != 0) + break; + + /* SHORT_PACKET_TRANSFERRED_INTERRUPT handles "usb-short" + * cases where DMA must be aborted; this code handles + * all non-abort DMA completions. + */ + if (unlikely (req->td->dmadesc == 0)) { + /* paranoia */ + tmp = readl (&ep->dma->dmacount); + if (tmp & DMA_BYTE_COUNT_MASK) + break; + /* single transfer mode */ + dma_done (ep, req, tmp, 0); + break; + } else if (!ep->is_in + && (req->req.length % ep->ep.maxpacket) != 0) { + tmp = readl (&ep->regs->ep_stat); + + /* AVOID TROUBLE HERE by not issuing short reads from + * your gadget driver. That helps avoids errata 0121, + * 0122, and 0124; not all cases trigger the warning. + */ + if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) { + WARN (ep->dev, "%s lost packet sync!\n", + ep->ep.name); + req->req.status = -EOVERFLOW; + } else if ((tmp = readl (&ep->regs->ep_avail)) != 0) { + /* fifo gets flushed later */ + ep->out_overflow = 1; + DEBUG (ep->dev, "%s dma, discard %d len %d\n", + ep->ep.name, tmp, + req->req.length); + req->req.status = -EOVERFLOW; + } + } + dma_done (ep, req, tmp, 0); + } +} + +static void restart_dma (struct net2280_ep *ep) +{ + struct net2280_request *req; + u32 dmactl = dmactl_default; + + if (ep->stopped) + return; + req = list_entry (ep->queue.next, struct net2280_request, queue); + + if (!use_dma_chaining) { + start_dma (ep, req); + return; + } + + /* the 2280 will be processing the queue unless queue hiccups after + * the previous transfer: + * IN: wanted automagic zlp, head doesn't (or vice versa) + * DMA_FIFO_VALIDATE doesn't init from dma descriptors. + * OUT: was "usb-short", we must restart. + */ + if (ep->is_in && !req->valid) { + struct net2280_request *entry, *prev = NULL; + int reqmode, done = 0; + + DEBUG (ep->dev, "%s dma hiccup td %p\n", ep->ep.name, req->td); + ep->in_fifo_validate = likely (req->req.zero + || (req->req.length % ep->ep.maxpacket) != 0); + if (ep->in_fifo_validate) + dmactl |= (1 << DMA_FIFO_VALIDATE); + list_for_each_entry (entry, &ep->queue, queue) { + __le32 dmacount; + + if (entry == req) + continue; + dmacount = entry->td->dmacount; + if (!done) { + reqmode = likely (entry->req.zero + || (entry->req.length + % ep->ep.maxpacket) != 0); + if (reqmode == ep->in_fifo_validate) { + entry->valid = 1; + dmacount |= valid_bit; + entry->td->dmacount = dmacount; + prev = entry; + continue; + } else { + /* force a hiccup */ + prev->td->dmacount |= dma_done_ie; + done = 1; + } + } + + /* walk the rest of the queue so unlinks behave */ + entry->valid = 0; + dmacount &= ~valid_bit; + entry->td->dmacount = dmacount; + prev = entry; + } + } + + writel (0, &ep->dma->dmactl); + start_queue (ep, dmactl, req->td_dma); +} + +static void abort_dma (struct net2280_ep *ep) +{ + /* abort the current transfer */ + if (likely (!list_empty (&ep->queue))) { + /* FIXME work around errata 0121, 0122, 0124 */ + writel ((1 << DMA_ABORT), &ep->dma->dmastat); + spin_stop_dma (ep->dma); + } else + stop_dma (ep->dma); + scan_dma_completions (ep); +} + +/* dequeue ALL requests */ +static void nuke (struct net2280_ep *ep) +{ + struct net2280_request *req; + + /* called with spinlock held */ + ep->stopped = 1; + if (ep->dma) + abort_dma (ep); + while (!list_empty (&ep->queue)) { + req = list_entry (ep->queue.next, + struct net2280_request, + queue); + done (ep, req, -ESHUTDOWN); + } +} + +/* dequeue JUST ONE request */ +static int net2280_dequeue (struct usb_ep *_ep, struct usb_request *_req) +{ + struct net2280_ep *ep; + struct net2280_request *req; + unsigned long flags; + u32 dmactl; + int stopped; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0) || !_req) + return -EINVAL; + + spin_lock_irqsave (&ep->dev->lock, flags); + stopped = ep->stopped; + + /* quiesce dma while we patch the queue */ + dmactl = 0; + ep->stopped = 1; + if (ep->dma) { + dmactl = readl (&ep->dma->dmactl); + /* WARNING erratum 0127 may kick in ... */ + stop_dma (ep->dma); + scan_dma_completions (ep); + } + + /* make sure it's still queued on this endpoint */ + list_for_each_entry (req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + spin_unlock_irqrestore (&ep->dev->lock, flags); + return -EINVAL; + } + + /* queue head may be partially complete. */ + if (ep->queue.next == &req->queue) { + if (ep->dma) { + DEBUG (ep->dev, "unlink (%s) dma\n", _ep->name); + _req->status = -ECONNRESET; + abort_dma (ep); + if (likely (ep->queue.next == &req->queue)) { + // NOTE: misreports single-transfer mode + req->td->dmacount = 0; /* invalidate */ + dma_done (ep, req, + readl (&ep->dma->dmacount), + -ECONNRESET); + } + } else { + DEBUG (ep->dev, "unlink (%s) pio\n", _ep->name); + done (ep, req, -ECONNRESET); + } + req = NULL; + + /* patch up hardware chaining data */ + } else if (ep->dma && use_dma_chaining) { + if (req->queue.prev == ep->queue.next) { + writel (le32_to_cpu (req->td->dmadesc), + &ep->dma->dmadesc); + if (req->td->dmacount & dma_done_ie) + writel (readl (&ep->dma->dmacount) + | le32_to_cpu(dma_done_ie), + &ep->dma->dmacount); + } else { + struct net2280_request *prev; + + prev = list_entry (req->queue.prev, + struct net2280_request, queue); + prev->td->dmadesc = req->td->dmadesc; + if (req->td->dmacount & dma_done_ie) + prev->td->dmacount |= dma_done_ie; + } + } + + if (req) + done (ep, req, -ECONNRESET); + ep->stopped = stopped; + + if (ep->dma) { + /* turn off dma on inactive queues */ + if (list_empty (&ep->queue)) + stop_dma (ep->dma); + else if (!ep->stopped) { + /* resume current request, or start new one */ + if (req) + writel (dmactl, &ep->dma->dmactl); + else + start_dma (ep, list_entry (ep->queue.next, + struct net2280_request, queue)); + } + } + + spin_unlock_irqrestore (&ep->dev->lock, flags); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int net2280_fifo_status (struct usb_ep *_ep); + +static int +net2280_set_halt (struct usb_ep *_ep, int value) +{ + struct net2280_ep *ep; + unsigned long flags; + int retval = 0; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return -EINVAL; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + if (ep->desc /* not ep0 */ && (ep->desc->bmAttributes & 0x03) + == USB_ENDPOINT_XFER_ISOC) + return -EINVAL; + + spin_lock_irqsave (&ep->dev->lock, flags); + if (!list_empty (&ep->queue)) + retval = -EAGAIN; + else if (ep->is_in && value && net2280_fifo_status (_ep) != 0) + retval = -EAGAIN; + else { + VDEBUG (ep->dev, "%s %s halt\n", _ep->name, + value ? "set" : "clear"); + /* set/clear, then synch memory views with the device */ + if (value) { + if (ep->num == 0) + ep->dev->protocol_stall = 1; + else + set_halt (ep); + } else + clear_halt (ep); + (void) readl (&ep->regs->ep_rsp); + } + spin_unlock_irqrestore (&ep->dev->lock, flags); + + return retval; +} + +static int +net2280_fifo_status (struct usb_ep *_ep) +{ + struct net2280_ep *ep; + u32 avail; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return -ENODEV; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + avail = readl (&ep->regs->ep_avail) & ((1 << 12) - 1); + if (avail > ep->fifo_size) + return -EOVERFLOW; + if (ep->is_in) + avail = ep->fifo_size - avail; + return avail; +} + +static void +net2280_fifo_flush (struct usb_ep *_ep) +{ + struct net2280_ep *ep; + + ep = container_of (_ep, struct net2280_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return; + + writel ((1 << FIFO_FLUSH), &ep->regs->ep_stat); + (void) readl (&ep->regs->ep_rsp); +} + +static const struct usb_ep_ops net2280_ep_ops = { + .enable = net2280_enable, + .disable = net2280_disable, + + .alloc_request = net2280_alloc_request, + .free_request = net2280_free_request, + + .alloc_buffer = net2280_alloc_buffer, + .free_buffer = net2280_free_buffer, + + .queue = net2280_queue, + .dequeue = net2280_dequeue, + + .set_halt = net2280_set_halt, + .fifo_status = net2280_fifo_status, + .fifo_flush = net2280_fifo_flush, +}; + +/*-------------------------------------------------------------------------*/ + +static int net2280_get_frame (struct usb_gadget *_gadget) +{ + struct net2280 *dev; + unsigned long flags; + u16 retval; + + if (!_gadget) + return -ENODEV; + dev = container_of (_gadget, struct net2280, gadget); + spin_lock_irqsave (&dev->lock, flags); + retval = get_idx_reg (dev->regs, REG_FRAME) & 0x03ff; + spin_unlock_irqrestore (&dev->lock, flags); + return retval; +} + +static int net2280_wakeup (struct usb_gadget *_gadget) +{ + struct net2280 *dev; + u32 tmp; + unsigned long flags; + + if (!_gadget) + return 0; + dev = container_of (_gadget, struct net2280, gadget); + + spin_lock_irqsave (&dev->lock, flags); + tmp = readl (&dev->usb->usbctl); + if (tmp & (1 << DEVICE_REMOTE_WAKEUP_ENABLE)) + writel (1 << GENERATE_RESUME, &dev->usb->usbstat); + spin_unlock_irqrestore (&dev->lock, flags); + + /* pci writes may still be posted */ + return 0; +} + +static int net2280_set_selfpowered (struct usb_gadget *_gadget, int value) +{ + struct net2280 *dev; + u32 tmp; + unsigned long flags; + + if (!_gadget) + return 0; + dev = container_of (_gadget, struct net2280, gadget); + + spin_lock_irqsave (&dev->lock, flags); + tmp = readl (&dev->usb->usbctl); + if (value) + tmp |= (1 << SELF_POWERED_STATUS); + else + tmp &= ~(1 << SELF_POWERED_STATUS); + writel (tmp, &dev->usb->usbctl); + spin_unlock_irqrestore (&dev->lock, flags); + + return 0; +} + +static int net2280_pullup(struct usb_gadget *_gadget, int is_on) +{ + struct net2280 *dev; + u32 tmp; + unsigned long flags; + + if (!_gadget) + return -ENODEV; + dev = container_of (_gadget, struct net2280, gadget); + + spin_lock_irqsave (&dev->lock, flags); + tmp = readl (&dev->usb->usbctl); + dev->softconnect = (is_on != 0); + if (is_on) + tmp |= (1 << USB_DETECT_ENABLE); + else + tmp &= ~(1 << USB_DETECT_ENABLE); + writel (tmp, &dev->usb->usbctl); + spin_unlock_irqrestore (&dev->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops net2280_ops = { + .get_frame = net2280_get_frame, + .wakeup = net2280_wakeup, + .set_selfpowered = net2280_set_selfpowered, + .pullup = net2280_pullup, +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +/* FIXME move these into procfs, and use seq_file. + * Sysfs _still_ doesn't behave for arbitrarily sized files, + * and also doesn't help products using this with 2.4 kernels. + */ + +/* "function" sysfs attribute */ +static ssize_t +show_function (struct device *_dev, struct device_attribute *attr, char *buf) +{ + struct net2280 *dev = dev_get_drvdata (_dev); + + if (!dev->driver + || !dev->driver->function + || strlen (dev->driver->function) > PAGE_SIZE) + return 0; + return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function); +} +static DEVICE_ATTR (function, S_IRUGO, show_function, NULL); + +static ssize_t +show_registers (struct device *_dev, struct device_attribute *attr, char *buf) +{ + struct net2280 *dev; + char *next; + unsigned size, t; + unsigned long flags; + int i; + u32 t1, t2; + const char *s; + + dev = dev_get_drvdata (_dev); + next = buf; + size = PAGE_SIZE; + spin_lock_irqsave (&dev->lock, flags); + + if (dev->driver) + s = dev->driver->driver.name; + else + s = "(none)"; + + /* Main Control Registers */ + t = scnprintf (next, size, "%s version " DRIVER_VERSION + ", chiprev %04x, dma %s\n\n" + "devinit %03x fifoctl %08x gadget '%s'\n" + "pci irqenb0 %02x irqenb1 %08x " + "irqstat0 %04x irqstat1 %08x\n", + driver_name, dev->chiprev, + use_dma + ? (use_dma_chaining ? "chaining" : "enabled") + : "disabled", + readl (&dev->regs->devinit), + readl (&dev->regs->fifoctl), + s, + readl (&dev->regs->pciirqenb0), + readl (&dev->regs->pciirqenb1), + readl (&dev->regs->irqstat0), + readl (&dev->regs->irqstat1)); + size -= t; + next += t; + + /* USB Control Registers */ + t1 = readl (&dev->usb->usbctl); + t2 = readl (&dev->usb->usbstat); + if (t1 & (1 << VBUS_PIN)) { + if (t2 & (1 << HIGH_SPEED)) + s = "high speed"; + else if (dev->gadget.speed == USB_SPEED_UNKNOWN) + s = "powered"; + else + s = "full speed"; + /* full speed bit (6) not working?? */ + } else + s = "not attached"; + t = scnprintf (next, size, + "stdrsp %08x usbctl %08x usbstat %08x " + "addr 0x%02x (%s)\n", + readl (&dev->usb->stdrsp), t1, t2, + readl (&dev->usb->ouraddr), s); + size -= t; + next += t; + + /* PCI Master Control Registers */ + + /* DMA Control Registers */ + + /* Configurable EP Control Registers */ + for (i = 0; i < 7; i++) { + struct net2280_ep *ep; + + ep = &dev->ep [i]; + if (i && !ep->desc) + continue; + + t1 = readl (&ep->regs->ep_cfg); + t2 = readl (&ep->regs->ep_rsp) & 0xff; + t = scnprintf (next, size, + "\n%s\tcfg %05x rsp (%02x) %s%s%s%s%s%s%s%s" + "irqenb %02x\n", + ep->ep.name, t1, t2, + (t2 & (1 << CLEAR_NAK_OUT_PACKETS)) + ? "NAK " : "", + (t2 & (1 << CLEAR_EP_HIDE_STATUS_PHASE)) + ? "hide " : "", + (t2 & (1 << CLEAR_EP_FORCE_CRC_ERROR)) + ? "CRC " : "", + (t2 & (1 << CLEAR_INTERRUPT_MODE)) + ? "interrupt " : "", + (t2 & (1<regs->ep_irqenb)); + size -= t; + next += t; + + t = scnprintf (next, size, + "\tstat %08x avail %04x " + "(ep%d%s-%s)%s\n", + readl (&ep->regs->ep_stat), + readl (&ep->regs->ep_avail), + t1 & 0x0f, DIR_STRING (t1), + type_string (t1 >> 8), + ep->stopped ? "*" : ""); + size -= t; + next += t; + + if (!ep->dma) + continue; + + t = scnprintf (next, size, + " dma\tctl %08x stat %08x count %08x\n" + "\taddr %08x desc %08x\n", + readl (&ep->dma->dmactl), + readl (&ep->dma->dmastat), + readl (&ep->dma->dmacount), + readl (&ep->dma->dmaaddr), + readl (&ep->dma->dmadesc)); + size -= t; + next += t; + + } + + /* Indexed Registers */ + // none yet + + /* Statistics */ + t = scnprintf (next, size, "\nirqs: "); + size -= t; + next += t; + for (i = 0; i < 7; i++) { + struct net2280_ep *ep; + + ep = &dev->ep [i]; + if (i && !ep->irqs) + continue; + t = scnprintf (next, size, " %s/%lu", ep->ep.name, ep->irqs); + size -= t; + next += t; + + } + t = scnprintf (next, size, "\n"); + size -= t; + next += t; + + spin_unlock_irqrestore (&dev->lock, flags); + + return PAGE_SIZE - size; +} +static DEVICE_ATTR (registers, S_IRUGO, show_registers, NULL); + +static ssize_t +show_queues (struct device *_dev, struct device_attribute *attr, char *buf) +{ + struct net2280 *dev; + char *next; + unsigned size; + unsigned long flags; + int i; + + dev = dev_get_drvdata (_dev); + next = buf; + size = PAGE_SIZE; + spin_lock_irqsave (&dev->lock, flags); + + for (i = 0; i < 7; i++) { + struct net2280_ep *ep = &dev->ep [i]; + struct net2280_request *req; + int t; + + if (i != 0) { + const struct usb_endpoint_descriptor *d; + + d = ep->desc; + if (!d) + continue; + t = d->bEndpointAddress; + t = scnprintf (next, size, + "\n%s (ep%d%s-%s) max %04x %s fifo %d\n", + ep->ep.name, t & USB_ENDPOINT_NUMBER_MASK, + (t & USB_DIR_IN) ? "in" : "out", + ({ char *val; + switch (d->bmAttributes & 0x03) { + case USB_ENDPOINT_XFER_BULK: + val = "bulk"; break; + case USB_ENDPOINT_XFER_INT: + val = "intr"; break; + default: + val = "iso"; break; + }; val; }), + le16_to_cpu (d->wMaxPacketSize) & 0x1fff, + ep->dma ? "dma" : "pio", ep->fifo_size + ); + } else /* ep0 should only have one transfer queued */ + t = scnprintf (next, size, "ep0 max 64 pio %s\n", + ep->is_in ? "in" : "out"); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + + if (list_empty (&ep->queue)) { + t = scnprintf (next, size, "\t(nothing queued)\n"); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + continue; + } + list_for_each_entry (req, &ep->queue, queue) { + if (ep->dma && req->td_dma == readl (&ep->dma->dmadesc)) + t = scnprintf (next, size, + "\treq %p len %d/%d " + "buf %p (dmacount %08x)\n", + &req->req, req->req.actual, + req->req.length, req->req.buf, + readl (&ep->dma->dmacount)); + else + t = scnprintf (next, size, + "\treq %p len %d/%d buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + + if (ep->dma) { + struct net2280_dma *td; + + td = req->td; + t = scnprintf (next, size, "\t td %08x " + " count %08x buf %08x desc %08x\n", + (u32) req->td_dma, + le32_to_cpu (td->dmacount), + le32_to_cpu (td->dmaaddr), + le32_to_cpu (td->dmadesc)); + if (t <= 0 || t > size) + goto done; + size -= t; + next += t; + } + } + } + +done: + spin_unlock_irqrestore (&dev->lock, flags); + return PAGE_SIZE - size; +} +static DEVICE_ATTR (queues, S_IRUGO, show_queues, NULL); + + +#else + +#define device_create_file(a,b) (0) +#define device_remove_file(a,b) do { } while (0) + +#endif + +/*-------------------------------------------------------------------------*/ + +/* another driver-specific mode might be a request type doing dma + * to/from another device fifo instead of to/from memory. + */ + +static void set_fifo_mode (struct net2280 *dev, int mode) +{ + /* keeping high bits preserves BAR2 */ + writel ((0xffff << PCI_BASE2_RANGE) | mode, &dev->regs->fifoctl); + + /* always ep-{a,b,e,f} ... maybe not ep-c or ep-d */ + INIT_LIST_HEAD (&dev->gadget.ep_list); + list_add_tail (&dev->ep [1].ep.ep_list, &dev->gadget.ep_list); + list_add_tail (&dev->ep [2].ep.ep_list, &dev->gadget.ep_list); + switch (mode) { + case 0: + list_add_tail (&dev->ep [3].ep.ep_list, &dev->gadget.ep_list); + list_add_tail (&dev->ep [4].ep.ep_list, &dev->gadget.ep_list); + dev->ep [1].fifo_size = dev->ep [2].fifo_size = 1024; + break; + case 1: + dev->ep [1].fifo_size = dev->ep [2].fifo_size = 2048; + break; + case 2: + list_add_tail (&dev->ep [3].ep.ep_list, &dev->gadget.ep_list); + dev->ep [1].fifo_size = 2048; + dev->ep [2].fifo_size = 1024; + break; + } + /* fifo sizes for ep0, ep-c, ep-d, ep-e, and ep-f never change */ + list_add_tail (&dev->ep [5].ep.ep_list, &dev->gadget.ep_list); + list_add_tail (&dev->ep [6].ep.ep_list, &dev->gadget.ep_list); +} + +/* just declare this in any driver that really need it */ +extern int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode); + +/** + * net2280_set_fifo_mode - change allocation of fifo buffers + * @gadget: access to the net2280 device that will be updated + * @mode: 0 for default, four 1kB buffers (ep-a through ep-d); + * 1 for two 2kB buffers (ep-a and ep-b only); + * 2 for one 2kB buffer (ep-a) and two 1kB ones (ep-b, ep-c). + * + * returns zero on success, else negative errno. when this succeeds, + * the contents of gadget->ep_list may have changed. + * + * you may only call this function when endpoints a-d are all disabled. + * use it whenever extra hardware buffering can help performance, such + * as before enabling "high bandwidth" interrupt endpoints that use + * maxpacket bigger than 512 (when double buffering would otherwise + * be unavailable). + */ +int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode) +{ + int i; + struct net2280 *dev; + int status = 0; + unsigned long flags; + + if (!gadget) + return -ENODEV; + dev = container_of (gadget, struct net2280, gadget); + + spin_lock_irqsave (&dev->lock, flags); + + for (i = 1; i <= 4; i++) + if (dev->ep [i].desc) { + status = -EINVAL; + break; + } + if (mode < 0 || mode > 2) + status = -EINVAL; + if (status == 0) + set_fifo_mode (dev, mode); + spin_unlock_irqrestore (&dev->lock, flags); + + if (status == 0) { + if (mode == 1) + DEBUG (dev, "fifo: ep-a 2K, ep-b 2K\n"); + else if (mode == 2) + DEBUG (dev, "fifo: ep-a 2K, ep-b 1K, ep-c 1K\n"); + /* else all are 1K */ + } + return status; +} +EXPORT_SYMBOL (net2280_set_fifo_mode); + +/*-------------------------------------------------------------------------*/ + +/* keeping it simple: + * - one bus driver, initted first; + * - one function driver, initted second + * + * most of the work to support multiple net2280 controllers would + * be to associate this gadget driver (yes?) with all of them, or + * perhaps to bind specific drivers to specific devices. + */ + +static struct net2280 *the_controller; + +static void usb_reset (struct net2280 *dev) +{ + u32 tmp; + + dev->gadget.speed = USB_SPEED_UNKNOWN; + (void) readl (&dev->usb->usbctl); + + net2280_led_init (dev); + + /* disable automatic responses, and irqs */ + writel (0, &dev->usb->stdrsp); + writel (0, &dev->regs->pciirqenb0); + writel (0, &dev->regs->pciirqenb1); + + /* clear old dma and irq state */ + for (tmp = 0; tmp < 4; tmp++) { + struct net2280_ep *ep = &dev->ep [tmp + 1]; + + if (ep->dma) + abort_dma (ep); + } + writel (~0, &dev->regs->irqstat0), + writel (~(1 << SUSPEND_REQUEST_INTERRUPT), &dev->regs->irqstat1), + + /* reset, and enable pci */ + tmp = readl (&dev->regs->devinit) + | (1 << PCI_ENABLE) + | (1 << FIFO_SOFT_RESET) + | (1 << USB_SOFT_RESET) + | (1 << M8051_RESET); + writel (tmp, &dev->regs->devinit); + + /* standard fifo and endpoint allocations */ + set_fifo_mode (dev, (fifo_mode <= 2) ? fifo_mode : 0); +} + +static void usb_reinit (struct net2280 *dev) +{ + u32 tmp; + int init_dma; + + /* use_dma changes are ignored till next device re-init */ + init_dma = use_dma; + + /* basic endpoint init */ + for (tmp = 0; tmp < 7; tmp++) { + struct net2280_ep *ep = &dev->ep [tmp]; + + ep->ep.name = ep_name [tmp]; + ep->dev = dev; + ep->num = tmp; + + if (tmp > 0 && tmp <= 4) { + ep->fifo_size = 1024; + if (init_dma) + ep->dma = &dev->dma [tmp - 1]; + } else + ep->fifo_size = 64; + ep->regs = &dev->epregs [tmp]; + ep_reset (dev->regs, ep); + } + dev->ep [0].ep.maxpacket = 64; + dev->ep [5].ep.maxpacket = 64; + dev->ep [6].ep.maxpacket = 64; + + dev->gadget.ep0 = &dev->ep [0].ep; + dev->ep [0].stopped = 0; + INIT_LIST_HEAD (&dev->gadget.ep0->ep_list); + + /* we want to prevent lowlevel/insecure access from the USB host, + * but erratum 0119 means this enable bit is ignored + */ + for (tmp = 0; tmp < 5; tmp++) + writel (EP_DONTUSE, &dev->dep [tmp].dep_cfg); +} + +static void ep0_start (struct net2280 *dev) +{ + writel ( (1 << CLEAR_EP_HIDE_STATUS_PHASE) + | (1 << CLEAR_NAK_OUT_PACKETS) + | (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) + , &dev->epregs [0].ep_rsp); + + /* + * hardware optionally handles a bunch of standard requests + * that the API hides from drivers anyway. have it do so. + * endpoint status/features are handled in software, to + * help pass tests for some dubious behavior. + */ + writel ( (1 << SET_TEST_MODE) + | (1 << SET_ADDRESS) + | (1 << DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP) + | (1 << GET_DEVICE_STATUS) + | (1 << GET_INTERFACE_STATUS) + , &dev->usb->stdrsp); + writel ( (1 << USB_ROOT_PORT_WAKEUP_ENABLE) + | (1 << SELF_POWERED_USB_DEVICE) + | (1 << REMOTE_WAKEUP_SUPPORT) + | (dev->softconnect << USB_DETECT_ENABLE) + | (1 << SELF_POWERED_STATUS) + , &dev->usb->usbctl); + + /* enable irqs so we can see ep0 and general operation */ + writel ( (1 << SETUP_PACKET_INTERRUPT_ENABLE) + | (1 << ENDPOINT_0_INTERRUPT_ENABLE) + , &dev->regs->pciirqenb0); + writel ( (1 << PCI_INTERRUPT_ENABLE) + | (1 << PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE) + | (1 << PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE) + | (1 << PCI_RETRY_ABORT_INTERRUPT_ENABLE) + | (1 << VBUS_INTERRUPT_ENABLE) + | (1 << ROOT_PORT_RESET_INTERRUPT_ENABLE) + | (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE) + , &dev->regs->pciirqenb1); + + /* don't leave any writes posted */ + (void) readl (&dev->usb->usbctl); +} + +/* when a driver is successfully registered, it will receive + * control requests including set_configuration(), which enables + * non-control requests. then usb traffic follows until a + * disconnect is reported. then a host may connect again, or + * the driver might get unbound. + */ +int usb_gadget_register_driver (struct usb_gadget_driver *driver) +{ + struct net2280 *dev = the_controller; + int retval; + unsigned i; + + /* insist on high speed support from the driver, since + * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE) + * "must not be used in normal operation" + */ + if (!driver + || driver->speed != USB_SPEED_HIGH + || !driver->bind + || !driver->unbind + || !driver->setup) + return -EINVAL; + if (!dev) + return -ENODEV; + if (dev->driver) + return -EBUSY; + + for (i = 0; i < 7; i++) + dev->ep [i].irqs = 0; + + /* hook up the driver ... */ + dev->softconnect = 1; + driver->driver.bus = NULL; + dev->driver = driver; + dev->gadget.dev.driver = &driver->driver; + retval = driver->bind (&dev->gadget); + if (retval) { + DEBUG (dev, "bind to driver %s --> %d\n", + driver->driver.name, retval); + dev->driver = NULL; + dev->gadget.dev.driver = NULL; + return retval; + } + + retval = device_create_file (&dev->pdev->dev, &dev_attr_function); + if (retval) goto err_unbind; + retval = device_create_file (&dev->pdev->dev, &dev_attr_queues); + if (retval) goto err_func; + + /* ... then enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + */ + net2280_led_active (dev, 1); + ep0_start (dev); + + DEBUG (dev, "%s ready, usbctl %08x stdrsp %08x\n", + driver->driver.name, + readl (&dev->usb->usbctl), + readl (&dev->usb->stdrsp)); + + /* pci writes may still be posted */ + return 0; + +err_func: + device_remove_file (&dev->pdev->dev, &dev_attr_function); +err_unbind: + driver->unbind (&dev->gadget); + dev->gadget.dev.driver = NULL; + dev->driver = NULL; + return retval; +} +EXPORT_SYMBOL (usb_gadget_register_driver); + +static void +stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect if it's not connected */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + + /* stop hardware; prevent new request submissions; + * and kill any outstanding requests. + */ + usb_reset (dev); + for (i = 0; i < 7; i++) + nuke (&dev->ep [i]); + + /* report disconnect; the driver is already quiesced */ + if (driver) { + spin_unlock (&dev->lock); + driver->disconnect (&dev->gadget); + spin_lock (&dev->lock); + } + + usb_reinit (dev); +} + +int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) +{ + struct net2280 *dev = the_controller; + unsigned long flags; + + if (!dev) + return -ENODEV; + if (!driver || driver != dev->driver) + return -EINVAL; + + spin_lock_irqsave (&dev->lock, flags); + stop_activity (dev, driver); + spin_unlock_irqrestore (&dev->lock, flags); + + net2280_pullup (&dev->gadget, 0); + + driver->unbind (&dev->gadget); + dev->gadget.dev.driver = NULL; + dev->driver = NULL; + + net2280_led_active (dev, 0); + device_remove_file (&dev->pdev->dev, &dev_attr_function); + device_remove_file (&dev->pdev->dev, &dev_attr_queues); + + DEBUG (dev, "unregistered driver '%s'\n", driver->driver.name); + return 0; +} +EXPORT_SYMBOL (usb_gadget_unregister_driver); + + +/*-------------------------------------------------------------------------*/ + +/* handle ep0, ep-e, ep-f with 64 byte packets: packet per irq. + * also works for dma-capable endpoints, in pio mode or just + * to manually advance the queue after short OUT transfers. + */ +static void handle_ep_small (struct net2280_ep *ep) +{ + struct net2280_request *req; + u32 t; + /* 0 error, 1 mid-data, 2 done */ + int mode = 1; + + if (!list_empty (&ep->queue)) + req = list_entry (ep->queue.next, + struct net2280_request, queue); + else + req = NULL; + + /* ack all, and handle what we care about */ + t = readl (&ep->regs->ep_stat); + ep->irqs++; +#if 0 + VDEBUG (ep->dev, "%s ack ep_stat %08x, req %p\n", + ep->ep.name, t, req ? &req->req : 0); +#endif + if (!ep->is_in || ep->dev->pdev->device == 0x2280) + writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat); + else + /* Added for 2282 */ + writel (t, &ep->regs->ep_stat); + + /* for ep0, monitor token irqs to catch data stage length errors + * and to synchronize on status. + * + * also, to defer reporting of protocol stalls ... here's where + * data or status first appears, handling stalls here should never + * cause trouble on the host side.. + * + * control requests could be slightly faster without token synch for + * status, but status can jam up that way. + */ + if (unlikely (ep->num == 0)) { + if (ep->is_in) { + /* status; stop NAKing */ + if (t & (1 << DATA_OUT_PING_TOKEN_INTERRUPT)) { + if (ep->dev->protocol_stall) { + ep->stopped = 1; + set_halt (ep); + } + if (!req) + allow_status (ep); + mode = 2; + /* reply to extra IN data tokens with a zlp */ + } else if (t & (1 << DATA_IN_TOKEN_INTERRUPT)) { + if (ep->dev->protocol_stall) { + ep->stopped = 1; + set_halt (ep); + mode = 2; + } else if (!req && !ep->stopped) + write_fifo (ep, NULL); + } + } else { + /* status; stop NAKing */ + if (t & (1 << DATA_IN_TOKEN_INTERRUPT)) { + if (ep->dev->protocol_stall) { + ep->stopped = 1; + set_halt (ep); + } + mode = 2; + /* an extra OUT token is an error */ + } else if (((t & (1 << DATA_OUT_PING_TOKEN_INTERRUPT)) + && req + && req->req.actual == req->req.length) + || !req) { + ep->dev->protocol_stall = 1; + set_halt (ep); + ep->stopped = 1; + if (req) + done (ep, req, -EOVERFLOW); + req = NULL; + } + } + } + + if (unlikely (!req)) + return; + + /* manual DMA queue advance after short OUT */ + if (likely (ep->dma != 0)) { + if (t & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) { + u32 count; + int stopped = ep->stopped; + + /* TRANSFERRED works around OUT_DONE erratum 0112. + * we expect (N <= maxpacket) bytes; host wrote M. + * iff (M < N) we won't ever see a DMA interrupt. + */ + ep->stopped = 1; + for (count = 0; ; t = readl (&ep->regs->ep_stat)) { + + /* any preceding dma transfers must finish. + * dma handles (M >= N), may empty the queue + */ + scan_dma_completions (ep); + if (unlikely (list_empty (&ep->queue) + || ep->out_overflow)) { + req = NULL; + break; + } + req = list_entry (ep->queue.next, + struct net2280_request, queue); + + /* here either (M < N), a "real" short rx; + * or (M == N) and the queue didn't empty + */ + if (likely (t & (1 << FIFO_EMPTY))) { + count = readl (&ep->dma->dmacount); + count &= DMA_BYTE_COUNT_MASK; + if (readl (&ep->dma->dmadesc) + != req->td_dma) + req = NULL; + break; + } + udelay(1); + } + + /* stop DMA, leave ep NAKing */ + writel ((1 << DMA_ABORT), &ep->dma->dmastat); + spin_stop_dma (ep->dma); + + if (likely (req)) { + req->td->dmacount = 0; + t = readl (&ep->regs->ep_avail); + dma_done (ep, req, count, + (ep->out_overflow || t) + ? -EOVERFLOW : 0); + } + + /* also flush to prevent erratum 0106 trouble */ + if (unlikely (ep->out_overflow + || (ep->dev->chiprev == 0x0100 + && ep->dev->gadget.speed + == USB_SPEED_FULL))) { + out_flush (ep); + ep->out_overflow = 0; + } + + /* (re)start dma if needed, stop NAKing */ + ep->stopped = stopped; + if (!list_empty (&ep->queue)) + restart_dma (ep); + } else + DEBUG (ep->dev, "%s dma ep_stat %08x ??\n", + ep->ep.name, t); + return; + + /* data packet(s) received (in the fifo, OUT) */ + } else if (t & (1 << DATA_PACKET_RECEIVED_INTERRUPT)) { + if (read_fifo (ep, req) && ep->num != 0) + mode = 2; + + /* data packet(s) transmitted (IN) */ + } else if (t & (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)) { + unsigned len; + + len = req->req.length - req->req.actual; + if (len > ep->ep.maxpacket) + len = ep->ep.maxpacket; + req->req.actual += len; + + /* if we wrote it all, we're usually done */ + if (req->req.actual == req->req.length) { + if (ep->num == 0) { + /* send zlps until the status stage */ + } else if (!req->req.zero || len != ep->ep.maxpacket) + mode = 2; + } + + /* there was nothing to do ... */ + } else if (mode == 1) + return; + + /* done */ + if (mode == 2) { + /* stream endpoints often resubmit/unlink in completion */ + done (ep, req, 0); + + /* maybe advance queue to next request */ + if (ep->num == 0) { + /* NOTE: net2280 could let gadget driver start the + * status stage later. since not all controllers let + * them control that, the api doesn't (yet) allow it. + */ + if (!ep->stopped) + allow_status (ep); + req = NULL; + } else { + if (!list_empty (&ep->queue) && !ep->stopped) + req = list_entry (ep->queue.next, + struct net2280_request, queue); + else + req = NULL; + if (req && !ep->is_in) + stop_out_naking (ep); + } + } + + /* is there a buffer for the next packet? + * for best streaming performance, make sure there is one. + */ + if (req && !ep->stopped) { + + /* load IN fifo with next packet (may be zlp) */ + if (t & (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)) + write_fifo (ep, &req->req); + } +} + +static struct net2280_ep * +get_ep_by_addr (struct net2280 *dev, u16 wIndex) +{ + struct net2280_ep *ep; + + if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) + return &dev->ep [0]; + list_for_each_entry (ep, &dev->gadget.ep_list, ep.ep_list) { + u8 bEndpointAddress; + + if (!ep->desc) + continue; + bEndpointAddress = ep->desc->bEndpointAddress; + if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) + continue; + if ((wIndex & 0x0f) == (bEndpointAddress & 0x0f)) + return ep; + } + return NULL; +} + +static void handle_stat0_irqs (struct net2280 *dev, u32 stat) +{ + struct net2280_ep *ep; + u32 num, scratch; + + /* most of these don't need individual acks */ + stat &= ~(1 << INTA_ASSERTED); + if (!stat) + return; + // DEBUG (dev, "irqstat0 %04x\n", stat); + + /* starting a control request? */ + if (unlikely (stat & (1 << SETUP_PACKET_INTERRUPT))) { + union { + u32 raw [2]; + struct usb_ctrlrequest r; + } u; + int tmp; + struct net2280_request *req; + + if (dev->gadget.speed == USB_SPEED_UNKNOWN) { + if (readl (&dev->usb->usbstat) & (1 << HIGH_SPEED)) + dev->gadget.speed = USB_SPEED_HIGH; + else + dev->gadget.speed = USB_SPEED_FULL; + net2280_led_speed (dev, dev->gadget.speed); + DEBUG (dev, "%s speed\n", + (dev->gadget.speed == USB_SPEED_HIGH) + ? "high" : "full"); + } + + ep = &dev->ep [0]; + ep->irqs++; + + /* make sure any leftover request state is cleared */ + stat &= ~(1 << ENDPOINT_0_INTERRUPT); + while (!list_empty (&ep->queue)) { + req = list_entry (ep->queue.next, + struct net2280_request, queue); + done (ep, req, (req->req.actual == req->req.length) + ? 0 : -EPROTO); + } + ep->stopped = 0; + dev->protocol_stall = 0; + + if (ep->dev->pdev->device == 0x2280) + tmp = (1 << FIFO_OVERFLOW) + | (1 << FIFO_UNDERFLOW); + else + tmp = 0; + + writel (tmp | (1 << TIMEOUT) + | (1 << USB_STALL_SENT) + | (1 << USB_IN_NAK_SENT) + | (1 << USB_IN_ACK_RCVD) + | (1 << USB_OUT_PING_NAK_SENT) + | (1 << USB_OUT_ACK_SENT) + | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT) + | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) + | (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + | (1 << DATA_IN_TOKEN_INTERRUPT) + , &ep->regs->ep_stat); + u.raw [0] = readl (&dev->usb->setup0123); + u.raw [1] = readl (&dev->usb->setup4567); + + cpu_to_le32s (&u.raw [0]); + cpu_to_le32s (&u.raw [1]); + + tmp = 0; + +#define w_value le16_to_cpup (&u.r.wValue) +#define w_index le16_to_cpup (&u.r.wIndex) +#define w_length le16_to_cpup (&u.r.wLength) + + /* ack the irq */ + writel (1 << SETUP_PACKET_INTERRUPT, &dev->regs->irqstat0); + stat ^= (1 << SETUP_PACKET_INTERRUPT); + + /* watch control traffic at the token level, and force + * synchronization before letting the status stage happen. + * FIXME ignore tokens we'll NAK, until driver responds. + * that'll mean a lot less irqs for some drivers. + */ + ep->is_in = (u.r.bRequestType & USB_DIR_IN) != 0; + if (ep->is_in) { + scratch = (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) + | (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + | (1 << DATA_IN_TOKEN_INTERRUPT); + stop_out_naking (ep); + } else + scratch = (1 << DATA_PACKET_RECEIVED_INTERRUPT) + | (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + | (1 << DATA_IN_TOKEN_INTERRUPT); + writel (scratch, &dev->epregs [0].ep_irqenb); + + /* we made the hardware handle most lowlevel requests; + * everything else goes uplevel to the gadget code. + */ + switch (u.r.bRequest) { + case USB_REQ_GET_STATUS: { + struct net2280_ep *e; + __le32 status; + + /* hw handles device and interface status */ + if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT)) + goto delegate; + if ((e = get_ep_by_addr (dev, w_index)) == 0 + || w_length > 2) + goto do_stall; + + if (readl (&e->regs->ep_rsp) + & (1 << SET_ENDPOINT_HALT)) + status = __constant_cpu_to_le32 (1); + else + status = __constant_cpu_to_le32 (0); + + /* don't bother with a request object! */ + writel (0, &dev->epregs [0].ep_irqenb); + set_fifo_bytecount (ep, w_length); + writel ((__force u32)status, &dev->epregs [0].ep_data); + allow_status (ep); + VDEBUG (dev, "%s stat %02x\n", ep->ep.name, status); + goto next_endpoints; + } + break; + case USB_REQ_CLEAR_FEATURE: { + struct net2280_ep *e; + + /* hw handles device features */ + if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (w_value != USB_ENDPOINT_HALT + || w_length != 0) + goto do_stall; + if ((e = get_ep_by_addr (dev, w_index)) == 0) + goto do_stall; + clear_halt (e); + allow_status (ep); + VDEBUG (dev, "%s clear halt\n", ep->ep.name); + goto next_endpoints; + } + break; + case USB_REQ_SET_FEATURE: { + struct net2280_ep *e; + + /* hw handles device features */ + if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (w_value != USB_ENDPOINT_HALT + || w_length != 0) + goto do_stall; + if ((e = get_ep_by_addr (dev, w_index)) == 0) + goto do_stall; + set_halt (e); + allow_status (ep); + VDEBUG (dev, "%s set halt\n", ep->ep.name); + goto next_endpoints; + } + break; + default: +delegate: + VDEBUG (dev, "setup %02x.%02x v%04x i%04x l%04x" + "ep_cfg %08x\n", + u.r.bRequestType, u.r.bRequest, + w_value, w_index, w_length, + readl (&ep->regs->ep_cfg)); + spin_unlock (&dev->lock); + tmp = dev->driver->setup (&dev->gadget, &u.r); + spin_lock (&dev->lock); + } + + /* stall ep0 on error */ + if (tmp < 0) { +do_stall: + VDEBUG (dev, "req %02x.%02x protocol STALL; stat %d\n", + u.r.bRequestType, u.r.bRequest, tmp); + dev->protocol_stall = 1; + } + + /* some in/out token irq should follow; maybe stall then. + * driver must queue a request (even zlp) or halt ep0 + * before the host times out. + */ + } + +#undef w_value +#undef w_index +#undef w_length + +next_endpoints: + /* endpoint data irq ? */ + scratch = stat & 0x7f; + stat &= ~0x7f; + for (num = 0; scratch; num++) { + u32 t; + + /* do this endpoint's FIFO and queue need tending? */ + t = 1 << num; + if ((scratch & t) == 0) + continue; + scratch ^= t; + + ep = &dev->ep [num]; + handle_ep_small (ep); + } + + if (stat) + DEBUG (dev, "unhandled irqstat0 %08x\n", stat); +} + +#define DMA_INTERRUPTS ( \ + (1 << DMA_D_INTERRUPT) \ + | (1 << DMA_C_INTERRUPT) \ + | (1 << DMA_B_INTERRUPT) \ + | (1 << DMA_A_INTERRUPT)) +#define PCI_ERROR_INTERRUPTS ( \ + (1 << PCI_MASTER_ABORT_RECEIVED_INTERRUPT) \ + | (1 << PCI_TARGET_ABORT_RECEIVED_INTERRUPT) \ + | (1 << PCI_RETRY_ABORT_INTERRUPT)) + +static void handle_stat1_irqs (struct net2280 *dev, u32 stat) +{ + struct net2280_ep *ep; + u32 tmp, num, mask, scratch; + + /* after disconnect there's nothing else to do! */ + tmp = (1 << VBUS_INTERRUPT) | (1 << ROOT_PORT_RESET_INTERRUPT); + mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED); + + /* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set. + * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and + * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT + * only indicates a change in the reset state). + */ + if (stat & tmp) { + writel (tmp, &dev->regs->irqstat1); + if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) + && ((readl (&dev->usb->usbstat) & mask) + == 0)) + || ((readl (&dev->usb->usbctl) + & (1 << VBUS_PIN)) == 0) + ) && ( dev->gadget.speed != USB_SPEED_UNKNOWN)) { + DEBUG (dev, "disconnect %s\n", + dev->driver->driver.name); + stop_activity (dev, dev->driver); + ep0_start (dev); + return; + } + stat &= ~tmp; + + /* vBUS can bounce ... one of many reasons to ignore the + * notion of hotplug events on bus connect/disconnect! + */ + if (!stat) + return; + } + + /* NOTE: chip stays in PCI D0 state for now, but it could + * enter D1 to save more power + */ + tmp = (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT); + if (stat & tmp) { + writel (tmp, &dev->regs->irqstat1); + if (stat & (1 << SUSPEND_REQUEST_INTERRUPT)) { + if (dev->driver->suspend) + dev->driver->suspend (&dev->gadget); + if (!enable_suspend) + stat &= ~(1 << SUSPEND_REQUEST_INTERRUPT); + } else { + if (dev->driver->resume) + dev->driver->resume (&dev->gadget); + /* at high speed, note erratum 0133 */ + } + stat &= ~tmp; + } + + /* clear any other status/irqs */ + if (stat) + writel (stat, &dev->regs->irqstat1); + + /* some status we can just ignore */ + if (dev->pdev->device == 0x2280) + stat &= ~((1 << CONTROL_STATUS_INTERRUPT) + | (1 << SUSPEND_REQUEST_INTERRUPT) + | (1 << RESUME_INTERRUPT) + | (1 << SOF_INTERRUPT)); + else + stat &= ~((1 << CONTROL_STATUS_INTERRUPT) + | (1 << RESUME_INTERRUPT) + | (1 << SOF_DOWN_INTERRUPT) + | (1 << SOF_INTERRUPT)); + + if (!stat) + return; + // DEBUG (dev, "irqstat1 %08x\n", stat); + + /* DMA status, for ep-{a,b,c,d} */ + scratch = stat & DMA_INTERRUPTS; + stat &= ~DMA_INTERRUPTS; + scratch >>= 9; + for (num = 0; scratch; num++) { + struct net2280_dma_regs __iomem *dma; + + tmp = 1 << num; + if ((tmp & scratch) == 0) + continue; + scratch ^= tmp; + + ep = &dev->ep [num + 1]; + dma = ep->dma; + + if (!dma) + continue; + + /* clear ep's dma status */ + tmp = readl (&dma->dmastat); + writel (tmp, &dma->dmastat); + + /* chaining should stop on abort, short OUT from fifo, + * or (stat0 codepath) short OUT transfer. + */ + if (!use_dma_chaining) { + if ((tmp & (1 << DMA_TRANSACTION_DONE_INTERRUPT)) + == 0) { + DEBUG (ep->dev, "%s no xact done? %08x\n", + ep->ep.name, tmp); + continue; + } + stop_dma (ep->dma); + } + + /* OUT transfers terminate when the data from the + * host is in our memory. Process whatever's done. + * On this path, we know transfer's last packet wasn't + * less than req->length. NAK_OUT_PACKETS may be set, + * or the FIFO may already be holding new packets. + * + * IN transfers can linger in the FIFO for a very + * long time ... we ignore that for now, accounting + * precisely (like PIO does) needs per-packet irqs + */ + scan_dma_completions (ep); + + /* disable dma on inactive queues; else maybe restart */ + if (list_empty (&ep->queue)) { + if (use_dma_chaining) + stop_dma (ep->dma); + } else { + tmp = readl (&dma->dmactl); + if (!use_dma_chaining + || (tmp & (1 << DMA_ENABLE)) == 0) + restart_dma (ep); + else if (ep->is_in && use_dma_chaining) { + struct net2280_request *req; + __le32 dmacount; + + /* the descriptor at the head of the chain + * may still have VALID_BIT clear; that's + * used to trigger changing DMA_FIFO_VALIDATE + * (affects automagic zlp writes). + */ + req = list_entry (ep->queue.next, + struct net2280_request, queue); + dmacount = req->td->dmacount; + dmacount &= __constant_cpu_to_le32 ( + (1 << VALID_BIT) + | DMA_BYTE_COUNT_MASK); + if (dmacount && (dmacount & valid_bit) == 0) + restart_dma (ep); + } + } + ep->irqs++; + } + + /* NOTE: there are other PCI errors we might usefully notice. + * if they appear very often, here's where to try recovering. + */ + if (stat & PCI_ERROR_INTERRUPTS) { + ERROR (dev, "pci dma error; stat %08x\n", stat); + stat &= ~PCI_ERROR_INTERRUPTS; + /* these are fatal errors, but "maybe" they won't + * happen again ... + */ + stop_activity (dev, dev->driver); + ep0_start (dev); + stat = 0; + } + + if (stat) + DEBUG (dev, "unhandled irqstat1 %08x\n", stat); +} + +static irqreturn_t net2280_irq (int irq, void *_dev) +{ + struct net2280 *dev = _dev; + + /* shared interrupt, not ours */ + if (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED))) + return IRQ_NONE; + + spin_lock (&dev->lock); + + /* handle disconnect, dma, and more */ + handle_stat1_irqs (dev, readl (&dev->regs->irqstat1)); + + /* control requests and PIO */ + handle_stat0_irqs (dev, readl (&dev->regs->irqstat0)); + + spin_unlock (&dev->lock); + + return IRQ_HANDLED; +} + +/*-------------------------------------------------------------------------*/ + +static void gadget_release (struct device *_dev) +{ + struct net2280 *dev = dev_get_drvdata (_dev); + + kfree (dev); +} + +/* tear down the binding between this driver and the pci device */ + +static void net2280_remove (struct pci_dev *pdev) +{ + struct net2280 *dev = pci_get_drvdata (pdev); + + /* start with the driver above us */ + if (dev->driver) { + /* should have been done already by driver model core */ + WARN (dev, "pci remove, driver '%s' is still registered\n", + dev->driver->driver.name); + usb_gadget_unregister_driver (dev->driver); + } + + /* then clean up the resources we allocated during probe() */ + net2280_led_shutdown (dev); + if (dev->requests) { + int i; + for (i = 1; i < 5; i++) { + if (!dev->ep [i].dummy) + continue; + pci_pool_free (dev->requests, dev->ep [i].dummy, + dev->ep [i].td_dma); + } + pci_pool_destroy (dev->requests); + } + if (dev->got_irq) + free_irq (pdev->irq, dev); + if (dev->regs) + iounmap (dev->regs); + if (dev->region) + release_mem_region (pci_resource_start (pdev, 0), + pci_resource_len (pdev, 0)); + if (dev->enabled) + pci_disable_device (pdev); + device_unregister (&dev->gadget.dev); + device_remove_file (&pdev->dev, &dev_attr_registers); + pci_set_drvdata (pdev, NULL); + + INFO (dev, "unbind\n"); + + the_controller = NULL; +} + +/* wrap this driver around the specified device, but + * don't respond over USB until a gadget driver binds to us. + */ + +static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct net2280 *dev; + unsigned long resource, len; + void __iomem *base = NULL; + int retval, i; + + /* if you want to support more than one controller in a system, + * usb_gadget_driver_{register,unregister}() must change. + */ + if (the_controller) { + dev_warn (&pdev->dev, "ignoring\n"); + return -EBUSY; + } + + /* alloc, and start init */ + dev = kzalloc (sizeof *dev, SLAB_KERNEL); + if (dev == NULL){ + retval = -ENOMEM; + goto done; + } + + pci_set_drvdata (pdev, dev); + spin_lock_init (&dev->lock); + dev->pdev = pdev; + dev->gadget.ops = &net2280_ops; + dev->gadget.is_dualspeed = 1; + + /* the "gadget" abstracts/virtualizes the controller */ + strcpy (dev->gadget.dev.bus_id, "gadget"); + dev->gadget.dev.parent = &pdev->dev; + dev->gadget.dev.dma_mask = pdev->dev.dma_mask; + dev->gadget.dev.release = gadget_release; + dev->gadget.name = driver_name; + + /* now all the pci goodies ... */ + if (pci_enable_device (pdev) < 0) { + retval = -ENODEV; + goto done; + } + dev->enabled = 1; + + /* BAR 0 holds all the registers + * BAR 1 is 8051 memory; unused here (note erratum 0103) + * BAR 2 is fifo memory; unused here + */ + resource = pci_resource_start (pdev, 0); + len = pci_resource_len (pdev, 0); + if (!request_mem_region (resource, len, driver_name)) { + DEBUG (dev, "controller already in use\n"); + retval = -EBUSY; + goto done; + } + dev->region = 1; + + /* FIXME provide firmware download interface to put + * 8051 code into the chip, e.g. to turn on PCI PM. + */ + + base = ioremap_nocache (resource, len); + if (base == NULL) { + DEBUG (dev, "can't map memory\n"); + retval = -EFAULT; + goto done; + } + dev->regs = (struct net2280_regs __iomem *) base; + dev->usb = (struct net2280_usb_regs __iomem *) (base + 0x0080); + dev->pci = (struct net2280_pci_regs __iomem *) (base + 0x0100); + dev->dma = (struct net2280_dma_regs __iomem *) (base + 0x0180); + dev->dep = (struct net2280_dep_regs __iomem *) (base + 0x0200); + dev->epregs = (struct net2280_ep_regs __iomem *) (base + 0x0300); + + /* put into initial config, link up all endpoints */ + writel (0, &dev->usb->usbctl); + usb_reset (dev); + usb_reinit (dev); + + /* irq setup after old hardware is cleaned up */ + if (!pdev->irq) { + ERROR (dev, "No IRQ. Check PCI setup!\n"); + retval = -ENODEV; + goto done; + } + + if (request_irq (pdev->irq, net2280_irq, IRQF_SHARED, driver_name, dev) + != 0) { + ERROR (dev, "request interrupt %d failed\n", pdev->irq); + retval = -EBUSY; + goto done; + } + dev->got_irq = 1; + + /* DMA setup */ + /* NOTE: we know only the 32 LSBs of dma addresses may be nonzero */ + dev->requests = pci_pool_create ("requests", pdev, + sizeof (struct net2280_dma), + 0 /* no alignment requirements */, + 0 /* or page-crossing issues */); + if (!dev->requests) { + DEBUG (dev, "can't get request pool\n"); + retval = -ENOMEM; + goto done; + } + for (i = 1; i < 5; i++) { + struct net2280_dma *td; + + td = pci_pool_alloc (dev->requests, GFP_KERNEL, + &dev->ep [i].td_dma); + if (!td) { + DEBUG (dev, "can't get dummy %d\n", i); + retval = -ENOMEM; + goto done; + } + td->dmacount = 0; /* not VALID */ + td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID); + td->dmadesc = td->dmaaddr; + dev->ep [i].dummy = td; + } + + /* enable lower-overhead pci memory bursts during DMA */ + writel ( (1 << DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE) + // 256 write retries may not be enough... + // | (1 << PCI_RETRY_ABORT_ENABLE) + | (1 << DMA_READ_MULTIPLE_ENABLE) + | (1 << DMA_READ_LINE_ENABLE) + , &dev->pci->pcimstctl); + /* erratum 0115 shouldn't appear: Linux inits PCI_LATENCY_TIMER */ + pci_set_master (pdev); + pci_set_mwi (pdev); + + /* ... also flushes any posted pci writes */ + dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff; + + /* done */ + INFO (dev, "%s\n", driver_desc); + INFO (dev, "irq %d, pci mem %p, chip rev %04x\n", + pdev->irq, base, dev->chiprev); + INFO (dev, "version: " DRIVER_VERSION "; dma %s\n", + use_dma + ? (use_dma_chaining ? "chaining" : "enabled") + : "disabled"); + the_controller = dev; + + retval = device_register (&dev->gadget.dev); + if (retval) goto done; + retval = device_create_file (&pdev->dev, &dev_attr_registers); + if (retval) goto done; + + return 0; + +done: + if (dev) + net2280_remove (pdev); + return retval; +} + +/* make sure the board is quiescent; otherwise it will continue + * generating IRQs across the upcoming reboot. + */ + +static void net2280_shutdown (struct pci_dev *pdev) +{ + struct net2280 *dev = pci_get_drvdata (pdev); + + /* disable IRQs */ + writel (0, &dev->regs->pciirqenb0); + writel (0, &dev->regs->pciirqenb1); + + /* disable the pullup so the host will think we're gone */ + writel (0, &dev->usb->usbctl); +} + + +/*-------------------------------------------------------------------------*/ + +static const struct pci_device_id pci_ids [] = { { + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, + .vendor = 0x17cc, + .device = 0x2280, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, +}, { + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, + .vendor = 0x17cc, + .device = 0x2282, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + +}, { /* end: all zeroes */ } +}; +MODULE_DEVICE_TABLE (pci, pci_ids); + +/* pci driver glue; this is a "new style" PCI driver module */ +static struct pci_driver net2280_pci_driver = { + .name = (char *) driver_name, + .id_table = pci_ids, + + .probe = net2280_probe, + .remove = net2280_remove, + .shutdown = net2280_shutdown, + + /* FIXME add power management support */ +}; + +MODULE_DESCRIPTION (DRIVER_DESC); +MODULE_AUTHOR ("David Brownell"); +MODULE_LICENSE ("GPL"); + +static int __init init (void) +{ + if (!use_dma) + use_dma_chaining = 0; + return pci_register_driver (&net2280_pci_driver); +} +module_init (init); + +static void __exit cleanup (void) +{ + pci_unregister_driver (&net2280_pci_driver); +} +module_exit (cleanup); -- cgit v1.2.3