From 1bd395156bbd03ababfb76e56296d27b6e05f0ab Mon Sep 17 00:00:00 2001 From: nbd Date: Mon, 27 Apr 2009 15:38:23 +0000 Subject: since the generic 2.6.24 support is gone, remove it for rb532 as well git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15444 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../rb532/patches-2.6.24/100-rb5xx_support.patch | 95 --------------------- .../rb532/patches-2.6.24/110-korina_ethernet.patch | 27 ------ target/linux/rb532/patches-2.6.24/120-cf.patch | 27 ------ .../rb532/patches-2.6.24/140-cmdline_hack.patch | 13 --- .../patches-2.6.24/200-bridge_resource_hack.patch | 13 --- .../rb532/patches-2.6.24/220-serial_fix.patch | 16 ---- .../patches-2.6.24/240-via_rhine_performance.patch | 98 ---------------------- .../linux/rb532/patches-2.6.24/510-rb500_led.patch | 25 ------ .../rb532/patches-2.6.24/520-rc32434_wdt.patch | 31 ------- .../patches-2.6.24/530-no_panic_pci_iomap.patch | 11 --- 10 files changed, 356 deletions(-) delete mode 100644 target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch delete mode 100644 target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch delete mode 100644 target/linux/rb532/patches-2.6.24/120-cf.patch delete mode 100644 target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch delete mode 100644 target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch delete mode 100644 target/linux/rb532/patches-2.6.24/220-serial_fix.patch delete mode 100644 target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch delete mode 100644 target/linux/rb532/patches-2.6.24/510-rb500_led.patch delete mode 100644 target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch delete mode 100644 target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch (limited to 'target/linux/rb532/patches-2.6.24') diff --git a/target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch b/target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch deleted file mode 100644 index f9eae4b52..000000000 --- a/target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch +++ /dev/null @@ -1,95 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -687,6 +687,23 @@ config WR_PPMC - This enables support for the Wind River MIPS32 4KC PPMC evaluation - board, which is based on GT64120 bridge chip. - -+config MIKROTIK_RB500 -+ bool "Support for RB5xx boards" -+ select HW_HAS_PCI -+ select CEVT_R4K -+ select CSRC_R4K -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SWAP_IO_SPACE -+ select DMA_NONCOHERENT -+ select GENERIC_GPIO -+ help -+ Support the Mikrotik(tm) Routerboard 500 series, -+ such as the RB532. -+ -+ - endchoice - - source "arch/mips/au1000/Kconfig" -@@ -967,6 +984,7 @@ config MIPS_L1_CACHE_SHIFT - default "4" if MACH_DECSTATION - default "7" if SGI_IP27 || SNI_RM - default "4" if PMC_MSP4200_EVAL -+ default "4" if MIKROTIK_RB500 - default "5" - - config HAVE_STD_PC_SERIAL_PORT ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -297,6 +297,13 @@ load-$(CONFIG_LEMOTE_FULONG) +=0xfffffff - cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote - - # -+# Routerboard 532 board -+# -+core-$(CONFIG_MIKROTIK_RB500) += arch/mips/rb500/ -+cflags-$(CONFIG_MIKROTIK_RB500) += -Iinclude/asm-mips/rc32434 -+load-$(CONFIG_MIKROTIK_RB500) += 0xffffffff80101000 -+ -+# - # For all MIPS, Inc. eval boards - # - core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup- - obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o - obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o - obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o -+obj-$(CONFIG_MIKROTIK_RB500) += pci-rc32434.o ops-rc32434.o fixup-rb500.o ---- a/drivers/pci/Makefile -+++ b/drivers/pci/Makefile -@@ -35,6 +35,7 @@ obj-$(CONFIG_PPC32) += setup-irq.o - obj-$(CONFIG_PPC64) += setup-bus.o - obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o - obj-$(CONFIG_X86_VISWS) += setup-irq.o -+obj-$(CONFIG_MIKROTIK_RB500) += setup-irq.o - - # - # ACPI Related PCI FW Functions ---- a/include/asm-mips/bootinfo.h -+++ b/include/asm-mips/bootinfo.h -@@ -198,6 +198,14 @@ - #define MACH_GROUP_BRCM 23 /* Broadcom */ - #define MACH_BCM47XX 1 /* Broadcom BCM47XX */ - -+ -+/* -+ * Valid machtype for group Mikrotik -+ */ -+#define MACH_GROUP_MIKROTIK 29 /* Mikrotik Boards */ -+#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ -+#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ -+ - #define CL_SIZE COMMAND_LINE_SIZE - - const char *get_system_type(void); ---- a/include/asm-mips/cpu.h -+++ b/include/asm-mips/cpu.h -@@ -196,7 +196,7 @@ enum cpu_type_enum { - */ - CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_74K, CPU_AU1000, - CPU_AU1100, CPU_AU1200, CPU_AU1500, CPU_AU1550, CPU_PR4450, -- CPU_BCM3302, CPU_BCM4710, -+ CPU_BCM3302, CPU_BCM4710, CPU_RC32300, - - /* - * MIPS64 class processors diff --git a/target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch b/target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch deleted file mode 100644 index 3c46590f9..000000000 --- a/target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -362,6 +362,13 @@ config AX88796_93CX6 - help - Select this if your platform comes with an external 93CX6 eeprom. - -+config KORINA -+ tristate "Korina Local Ethernet support" -+ depends on NET_ETHERNET && ( IDT_EB434 || MIKROTIK_RB500) -+ help -+ IDT RC32434 has one local ethernet port. Say Y here to enable it. -+ To compile this driver as a module, choose M here. -+ - config MACE - tristate "MACE (Power Mac ethernet) support" - depends on PPC_PMAC && PPC32 ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -30,6 +30,8 @@ ucc_geth_driver-objs := ucc_geth.o ucc_g - # - obj-$(CONFIG_PLIP) += plip.o - -+obj-$(CONFIG_KORINA) += korina.o -+ - obj-$(CONFIG_ROADRUNNER) += rrunner.o - - obj-$(CONFIG_HAPPYMEAL) += sunhme.o diff --git a/target/linux/rb532/patches-2.6.24/120-cf.patch b/target/linux/rb532/patches-2.6.24/120-cf.patch deleted file mode 100644 index 15b84a1db..000000000 --- a/target/linux/rb532/patches-2.6.24/120-cf.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/block/Kconfig -+++ b/drivers/block/Kconfig -@@ -408,6 +408,14 @@ config SUNVDC - Support for virtual disk devices as a client under Sun - Logical Domains. - -+config BLK_DEV_CF_MIPS -+ bool "CF slot of RB532 board" -+ depends on MIKROTIK_RB500 -+ default y -+ help -+ The Routerboard 532 has a CF slot on it. Enable the special block -+ device driver for it. -+ - source "drivers/s390/block/Kconfig" - - config XILINX_SYSACE ---- a/drivers/block/Makefile -+++ b/drivers/block/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o - obj-$(CONFIG_XILINX_SYSACE) += xsysace.o - obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o - obj-$(CONFIG_SUNVDC) += sunvdc.o -+obj-$(CONFIG_BLK_DEV_CF_MIPS) += rb500/ - - obj-$(CONFIG_BLK_DEV_UMEM) += umem.o - obj-$(CONFIG_BLK_DEV_NBD) += nbd.o diff --git a/target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch b/target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch deleted file mode 100644 index 29a4e1966..000000000 --- a/target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/arch/mips/kernel/head.S -+++ b/arch/mips/kernel/head.S -@@ -122,6 +122,10 @@ - - j kernel_entry - nop -+ -+EXPORT(_image_cmdline) -+ .ascii "CMDLINE:" -+ - #ifndef CONFIG_NO_EXCEPT_FILL - /* - * Reserved space for exception handlers. diff --git a/target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch b/target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch deleted file mode 100644 index 552b7282e..000000000 --- a/target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/arch/mips/pci/pci.c -+++ b/arch/mips/pci/pci.c -@@ -64,8 +64,10 @@ pcibios_align_resource(void *data, struc - /* - * Put everything into 0x00-0xff region modulo 0x400 - */ -+#ifndef CONFIG_MIKROTIK_RB500 - if (start & 0x300) - start = (start + 0x3ff) & ~0x3ff; -+#endif - } else if (res->flags & IORESOURCE_MEM) { - /* Make sure we start at our min on all hoses */ - if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start) diff --git a/target/linux/rb532/patches-2.6.24/220-serial_fix.patch b/target/linux/rb532/patches-2.6.24/220-serial_fix.patch deleted file mode 100644 index 59194da34..000000000 --- a/target/linux/rb532/patches-2.6.24/220-serial_fix.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/drivers/serial/8250.c -+++ b/drivers/serial/8250.c -@@ -433,6 +433,13 @@ serial_out(struct uart_8250_port *up, in - default: - outb(value, up->port.iobase + offset); - } -+ -+#if defined(CONFIG_IDT_EB434) || defined(CONFIG_MIKROTIK_RB500) -+ __SLOW_DOWN_IO; -+ __SLOW_DOWN_IO; -+ __SLOW_DOWN_IO; -+ __SLOW_DOWN_IO; -+#endif - } - - static void diff --git a/target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch b/target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch deleted file mode 100644 index ba66d40bd..000000000 --- a/target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch +++ /dev/null @@ -1,98 +0,0 @@ ---- a/drivers/net/via-rhine.c -+++ b/drivers/net/via-rhine.c -@@ -33,6 +33,8 @@ - #define DRV_VERSION "1.4.3" - #define DRV_RELDATE "2007-03-06" - -+#define PKT_ALIGN 1 -+ - - /* A few user-configurable values. - These may be modified when a driver module is loaded. */ -@@ -40,6 +42,7 @@ - static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ - static int max_interrupt_work = 20; - -+#ifndef PKT_ALIGN - /* Set the copy breakpoint for the copy-only-tiny-frames scheme. - Setting to > 1518 effectively disables this feature. */ - #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \ -@@ -49,6 +52,7 @@ static int rx_copybreak = 1518; - #else - static int rx_copybreak; - #endif -+#endif /* PKT_ALIGN */ - - /* Work-around for broken BIOSes: they are unable to get the chip back out of - power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */ -@@ -111,6 +115,7 @@ static const int multicast_filter_limit - #include - #include - #include -+#include - #include - - /* These identify the driver base version and may not be removed. */ -@@ -130,12 +135,14 @@ MODULE_LICENSE("GPL"); - - module_param(max_interrupt_work, int, 0); - module_param(debug, int, 0); --module_param(rx_copybreak, int, 0); - module_param(avoid_D3, bool, 0); - MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt"); - MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)"); --MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); - MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)"); -+#ifndef PKT_ALIGN -+module_param(rx_copybreak, int, 0); -+MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); -+#endif - - /* - Theory of Operation -@@ -922,7 +929,7 @@ static void alloc_rbufs(struct net_devic - - /* Fill in the Rx buffers. Handle allocation failure gracefully. */ - for (i = 0; i < RX_RING_SIZE; i++) { -- struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz); -+ struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz + 4); - rp->rx_skbuff[i] = skb; - if (skb == NULL) - break; -@@ -1485,7 +1492,9 @@ static int rhine_rx(struct net_device *d - struct sk_buff *skb; - /* Length should omit the CRC */ - int pkt_len = data_size - 4; -- -+#ifdef PKT_ALIGN -+ int i; -+#else - /* Check if the packet is long enough to accept without - copying to a minimally-sized skbuff. */ - if (pkt_len < rx_copybreak && -@@ -1504,7 +1513,9 @@ static int rhine_rx(struct net_device *d - rp->rx_skbuff_dma[entry], - rp->rx_buf_sz, - PCI_DMA_FROMDEVICE); -- } else { -+ } else -+#endif -+ { - skb = rp->rx_skbuff[entry]; - if (skb == NULL) { - printk(KERN_ERR "%s: Inconsistent Rx " -@@ -1518,6 +1529,14 @@ static int rhine_rx(struct net_device *d - rp->rx_skbuff_dma[entry], - rp->rx_buf_sz, - PCI_DMA_FROMDEVICE); -+#ifdef PKT_ALIGN -+ /* align the data to the ip header - should be faster than copying the entire packet */ -+ for (i = pkt_len - (pkt_len % 4); i >= 0; i -= 4) { -+ put_unaligned(*((u32 *) (skb->data + i)), (u32 *) (skb->data + i + 2)); -+ } -+ skb->data += 2; -+ skb->tail += 2; -+#endif - } - skb->protocol = eth_type_trans(skb, dev); - #ifdef CONFIG_VIA_RHINE_NAPI diff --git a/target/linux/rb532/patches-2.6.24/510-rb500_led.patch b/target/linux/rb532/patches-2.6.24/510-rb500_led.patch deleted file mode 100644 index d38b427fd..000000000 --- a/target/linux/rb532/patches-2.6.24/510-rb500_led.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -120,6 +120,12 @@ config LEDS_CM_X270 - help - This option enables support for the CM-X270 LEDs. - -+config LEDS_RB500 -+ tristate "LED Support for RB5xx boards" -+ depends on LEDS_CLASS && MIKROTIK_RB500 -+ help -+ This option enables support for the yellow user LED on RB5xx boards. -+ - comment "LED Triggers" - - config LEDS_TRIGGERS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE) += leds- - obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o - obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o - obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o -+obj-$(CONFIG_LEDS_RB500) += leds-rb500.o - - # LED Triggers - obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o diff --git a/target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch b/target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch deleted file mode 100644 index cfcf69777..000000000 --- a/target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/mips/kernel/time.c -+++ b/arch/mips/kernel/time.c -@@ -75,6 +75,7 @@ EXPORT_SYMBOL(perf_irq); - */ - - unsigned int mips_hpt_frequency; -+EXPORT_SYMBOL(mips_hpt_frequency); - - void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock) - { ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -639,6 +639,18 @@ config AR7_WDT - help - Hardware driver for the TI AR7 Watchdog Timer. - -+config RC32434_WDT -+ tristate "IDT Interprise 79RC32434 SoC hardware watchdog" -+ depends on WATCHDOG && MIKROTIK_RB500 -+ help -+ This is a driver for hardware watchdog integrated in IDT Interprise -+ 79RC32434 SoC. This watchdog simply watches your kernel to make sure -+ it doesn't freeze, and if it does, it reboots your computer after a -+ certain amount of time. -+ -+ To compile this driver as a module, choose M here: the module will be -+ called rc32434_wdt. -+ - # PARISC Architecture - - # POWERPC Architecture diff --git a/target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch b/target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch deleted file mode 100644 index 1e79bfcd0..000000000 --- a/target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/lib/iomap-pci.c -+++ b/arch/mips/lib/iomap-pci.c -@@ -32,7 +32,7 @@ static void __iomem *ioport_map_pci(stru - "report it to linux-mips@linux-mips.org or your " - "vendor.\n", name); - #ifdef CONFIG_PCI_DOMAINS -- panic("To avoid data corruption io_map_base MUST be set with " -+ printk(KERN_WARNING "To avoid data corruption io_map_base MUST be set with " - "multiple PCI domains."); - #endif - } -- cgit v1.2.3