From 82da4199c3fefabb6e2ad89bc349eb1dbad94178 Mon Sep 17 00:00:00 2001 From: florian Date: Tue, 15 Jul 2008 17:18:28 +0000 Subject: Add basic 2.6.24 support for rb532, korina napi code has to be adapted to work git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11844 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../rb532/files-2.6.24/arch/mips/rb500/devices.c | 338 +++++++++++++++++++++ 1 file changed, 338 insertions(+) create mode 100644 target/linux/rb532/files-2.6.24/arch/mips/rb500/devices.c (limited to 'target/linux/rb532/files-2.6.24/arch/mips/rb500/devices.c') diff --git a/target/linux/rb532/files-2.6.24/arch/mips/rb500/devices.c b/target/linux/rb532/files-2.6.24/arch/mips/rb500/devices.c new file mode 100644 index 000000000..6372737de --- /dev/null +++ b/target/linux/rb532/files-2.6.24/arch/mips/rb500/devices.c @@ -0,0 +1,338 @@ +/* + * RouterBoard 500 Platform devices + * + * Copyright (C) 2006 Felix Fietkau + * Copyright (C) 2007 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +#define ETH0_DMA_RX_IRQ GROUP1_IRQ_BASE + 0 +#define ETH0_DMA_TX_IRQ GROUP1_IRQ_BASE + 1 +#define ETH0_RX_OVR_IRQ GROUP3_IRQ_BASE + 9 +#define ETH0_TX_UND_IRQ GROUP3_IRQ_BASE + 10 + +#define ETH0_RX_DMA_ADDR (DMA0_PhysicalAddress + 0*DMA_CHAN_OFFSET) +#define ETH0_TX_DMA_ADDR (DMA0_PhysicalAddress + 1*DMA_CHAN_OFFSET) + +/* NAND definitions */ +#define MEM32(x) *((volatile unsigned *) (x)) + +#define GPIO_RDY (1 << 0x08) +#define GPIO_WPX (1 << 0x09) +#define GPIO_ALE (1 << 0x0a) +#define GPIO_CLE (1 << 0x0b) + +extern char* board_type; + +static struct resource korina_dev0_res[] = { + { + .name = "korina_regs", + .start = ETH0_PhysicalAddress, + .end = ETH0_PhysicalAddress + sizeof(ETH_t), + .flags = IORESOURCE_MEM, + }, { + .name = "korina_rx", + .start = ETH0_DMA_RX_IRQ, + .end = ETH0_DMA_RX_IRQ, + .flags = IORESOURCE_IRQ + }, { + .name = "korina_tx", + .start = ETH0_DMA_TX_IRQ, + .end = ETH0_DMA_TX_IRQ, + .flags = IORESOURCE_IRQ + }, { + .name = "korina_ovr", + .start = ETH0_RX_OVR_IRQ, + .end = ETH0_RX_OVR_IRQ, + .flags = IORESOURCE_IRQ + }, { + .name = "korina_und", + .start = ETH0_TX_UND_IRQ, + .end = ETH0_TX_UND_IRQ, + .flags = IORESOURCE_IRQ + }, { + .name = "korina_dma_rx", + .start = ETH0_RX_DMA_ADDR, + .end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "korina_dma_tx", + .start = ETH0_TX_DMA_ADDR, + .end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct korina_device korina_dev0_data = { + .name = "korina0", + .mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee} +}; + +static struct platform_device korina_dev0 = { + .id = 0, + .name = "korina", + .dev.platform_data = &korina_dev0_data, + .resource = korina_dev0_res, + .num_resources = ARRAY_SIZE(korina_dev0_res), +}; + +#define CF_GPIO_NUM 13 + +static struct resource cf_slot0_res[] = { + { + .name = "cf_membase", + .flags = IORESOURCE_MEM + }, { + .name = "cf_irq", + .start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */ + .end = (8 + 4 * 32 + CF_GPIO_NUM), + .flags = IORESOURCE_IRQ + } +}; + +static struct cf_device cf_slot0_data = { + .gpio_pin = 13 +}; + +static struct platform_device cf_slot0 = { + .id = 0, + .name = "rb500-cf", + .dev.platform_data = &cf_slot0_data, + .resource = cf_slot0_res, + .num_resources = ARRAY_SIZE(cf_slot0_res), +}; + +/* Resources and device for NAND. There is no data needed and no irqs, so just define the memory used. */ + +/* + * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader + * will not be able to find the kernel that we load. So set the oobinfo + * when creating the partitions + */ +static struct nand_ecclayout rb500_nand_ecclayout = { + .eccbytes = 6, + .eccpos = { 8, 9, 10, 13, 14, 15 }, + .oobavail = 9, + .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } +}; + +int rb500_dev_ready(struct mtd_info *mtd) +{ + return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY; +} + +void rb500_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *chip = mtd->priv; + unsigned char orbits, nandbits; + + if (ctrl & NAND_CTRL_CHANGE) { + + orbits = (ctrl & NAND_CLE) << 1; + orbits |= (ctrl & NAND_ALE) >> 1; + + nandbits = (~ctrl & NAND_CLE) << 1; + nandbits |= (~ctrl & NAND_ALE) >> 1; + + changeLatchU5(orbits, nandbits); + } + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); +} + +static struct resource nand_slot0_res[] = { + [0] = { + .name = "nand_membase", + .flags = IORESOURCE_MEM + } +}; + +struct platform_nand_data rb500_nand_data = { + .ctrl.dev_ready = rb500_dev_ready, + .ctrl.cmd_ctrl = rb500_cmd_ctrl, +}; + +static struct platform_device nand_slot0 = { + .name = "gen_nand", + .id = -1, + .resource = nand_slot0_res, + .num_resources = ARRAY_SIZE(nand_slot0_res), + .dev.platform_data = &rb500_nand_data, +}; + +static struct mtd_partition rb500_partition_info[] = { + { + .name = "Routerboard NAND boot", + .offset = 0, + .size = 4 * 1024 * 1024, + }, { + .name = "rootfs", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct platform_device rb500_led = { + .name = "rb500-led", + .id = 0, +}; + +static struct gpio_keys_button rb500_gpio_btn[] = { + { + .gpio = 1, + .code = BTN_0, + .desc = "S1", + .active_low = 1, + } +}; + +static struct gpio_keys_platform_data rb500_gpio_btn_data = { + .buttons = rb500_gpio_btn, + .nbuttons = ARRAY_SIZE(rb500_gpio_btn), +}; + +static struct platform_device rb500_button = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &rb500_gpio_btn_data, + } +}; + +static struct platform_device *rb500_devs[] = { + &korina_dev0, + &nand_slot0, + &cf_slot0, + &rb500_led, + &rb500_button +}; + +static void __init parse_mac_addr(char *macstr) +{ + int i, j; + unsigned char result, value; + + for (i = 0; i < 6; i++) { + result = 0; + + if (i != 5 && *(macstr + 2) != ':') + return; + + for (j = 0; j < 2; j++) { + if (isxdigit(*macstr) + && (value = + isdigit(*macstr) ? *macstr - + '0' : toupper(*macstr) - 'A' + 10) < 16) { + result = result * 16 + value; + macstr++; + } else + return; + } + + macstr++; + korina_dev0_data.mac[i] = result; + } +} + + +/* DEVICE CONTROLLER 1 */ +#define CFG_DC_DEV1 (void*)0xb8010010 +#define CFG_DC_DEV2 (void*)0xb8010020 +#define CFG_DC_DEVBASE 0x0 +#define CFG_DC_DEVMASK 0x4 +#define CFG_DC_DEVC 0x8 +#define CFG_DC_DEVTC 0xC + +/* NAND definitions */ +#define NAND_CHIP_DELAY 25 + +static int rb500_nand_fixup(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + + if (mtd->writesize == 512) + chip->ecc.layout = &rb500_nand_ecclayout; + + return 0; +} + +static void __init rb500_nand_setup(void) +{ + switch (mips_machtype) { + case MACH_MIKROTIK_RB532A: + changeLatchU5(LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE | LO_WPX); + break; + default: + changeLatchU5(LO_WPX | LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE); + break; + } + + /* Setup NAND specific settings */ + rb500_nand_data.chip.nr_chips = 1; + rb500_nand_data.chip.nr_partitions = ARRAY_SIZE(rb500_partition_info); + rb500_nand_data.chip.partitions = rb500_partition_info; + rb500_nand_data.chip.chip_delay = NAND_CHIP_DELAY; + rb500_nand_data.chip.options = NAND_NO_AUTOINCR; + + rb500_nand_data.chip.chip_fixup = &rb500_nand_fixup; +} + + +static int __init plat_setup_devices(void) +{ + /* Look for the CF card reader */ + if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK)) + rb500_devs[1] = NULL; + else { + cf_slot0_res[0].start = + readl(CFG_DC_DEV1 + CFG_DC_DEVBASE); + cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000; + } + + /* Read the NAND resources from the device controller */ + nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE); + nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000; + + /* Initialise the NAND device */ + rb500_nand_setup(); + + return platform_add_devices(rb500_devs, ARRAY_SIZE(rb500_devs)); +} + +static int __init setup_kmac(char *s) +{ + printk("korina mac = %s\n", s); + parse_mac_addr(s); + return 0; +} + +__setup("kmac=", setup_kmac); + +arch_initcall(plat_setup_devices); -- cgit v1.2.3