From 7aa11efc1796c29d446eca99ec7d9bc7ed2c0072 Mon Sep 17 00:00:00 2001 From: juhosg Date: Sat, 29 Sep 2007 14:27:54 +0000 Subject: get rid of per-profile base-files git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9069 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../rb532/base-files/default/etc/config/network | 12 ---- target/linux/rb532/base-files/default/etc/diag.sh | 19 ------- target/linux/rb532/base-files/default/sbin/cf2nand | 62 --------------------- .../linux/rb532/base-files/default/sbin/wget2nand | 65 ---------------------- target/linux/rb532/base-files/etc/config/network | 12 ++++ target/linux/rb532/base-files/etc/diag.sh | 19 +++++++ target/linux/rb532/base-files/sbin/cf2nand | 62 +++++++++++++++++++++ target/linux/rb532/base-files/sbin/wget2nand | 65 ++++++++++++++++++++++ 8 files changed, 158 insertions(+), 158 deletions(-) delete mode 100644 target/linux/rb532/base-files/default/etc/config/network delete mode 100644 target/linux/rb532/base-files/default/etc/diag.sh delete mode 100755 target/linux/rb532/base-files/default/sbin/cf2nand delete mode 100755 target/linux/rb532/base-files/default/sbin/wget2nand create mode 100644 target/linux/rb532/base-files/etc/config/network create mode 100644 target/linux/rb532/base-files/etc/diag.sh create mode 100755 target/linux/rb532/base-files/sbin/cf2nand create mode 100755 target/linux/rb532/base-files/sbin/wget2nand (limited to 'target/linux/rb532/base-files') diff --git a/target/linux/rb532/base-files/default/etc/config/network b/target/linux/rb532/base-files/default/etc/config/network deleted file mode 100644 index 827969057..000000000 --- a/target/linux/rb532/base-files/default/etc/config/network +++ /dev/null @@ -1,12 +0,0 @@ -# Copyright (C) 2006 OpenWrt.org - -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option ifname eth0 - option proto dhcp - diff --git a/target/linux/rb532/base-files/default/etc/diag.sh b/target/linux/rb532/base-files/default/etc/diag.sh deleted file mode 100644 index d8f9a8825..000000000 --- a/target/linux/rb532/base-files/default/etc/diag.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -# Copyright (C) 2007 OpenWrt.org - -set_led() { - local led="$1" - local state="$2" - [ -d "/sys/class/leds/rb500led:$led" ] && echo "$state" > "/sys/class/leds/rb500led:$led/brightness" -} - -set_state() { - case "$1" in - preinit) - set_led amber 1 - ;; - done) - set_led amber 0 - ;; - esac -} diff --git a/target/linux/rb532/base-files/default/sbin/cf2nand b/target/linux/rb532/base-files/default/sbin/cf2nand deleted file mode 100755 index fb3717499..000000000 --- a/target/linux/rb532/base-files/default/sbin/cf2nand +++ /dev/null @@ -1,62 +0,0 @@ -#!/bin/sh -. /etc/functions.sh - -copy_kernel() { - local input="$1" - local output="$2" - local cmdline="$3" - size="$(echo -n "$cmdline" | wc -c)" - dd if="$input" bs=3M count=1 > "$output" - /sbin/patch-cmdline "$output" "$cmdline" -} - -fstype="$(mount | grep ' / ' | awk '$5 != "rootfs" {print $5}')" -case "$fstype" in - ext2|jffs2) echo "Copying from $fstype to yaffs2";; - *) echo "Invalid filesystem."; exit 1;; -esac - -[ -d /tmp/cf2nand ] && { - echo "/tmp/cf2nand already exists" - exit 1 -} - -mkdir /tmp/cf2nand -mkdir /tmp/cf2nand/rootfs -mount -t "$fstype" /dev/root /tmp/cf2nand/rootfs || { - echo "Mounting rootfs failed." - exit 1 -} - -boot="$(find_mtd_part 'RouterBoard NAND Boot')" -main="$(find_mtd_part 'RouterBoard NAND Main')" -[ -z "$boot" -o -z "$main" ] && { - echo "Cannot find NAND Flash partitions" - exit 1 -} - -echo "Erasing filesystem..." -mtd erase Boot 2>/dev/null >/dev/null -mtd erase Main 2>/dev/null >/dev/null - -mkdir /tmp/cf2nand/p1 -mkdir /tmp/cf2nand/p2 -mount -t yaffs2 "$boot" /tmp/cf2nand/p1 -mount -t yaffs2 "$main" /tmp/cf2nand/p2 - -echo "Copying kernel..." -copy_kernel /dev/cf/card0/part1 /tmp/cf2nand/p1/kernel "root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit " 2>/dev/null >/dev/null -umount /tmp/cf2nand/p1 -rmdir /tmp/cf2nand/p1 - -echo "Copying filesystem..." -( cd /tmp/cf2nand/rootfs; tar c . ) | ( cd /tmp/cf2nand/p2; tar x ) -echo "chmod ugo+x /" > /tmp/cf2nand/p2/etc/uci-defaults/set_root_permission -sync -umount /tmp/cf2nand/p2 -rmdir /tmp/cf2nand/p2 - -umount /tmp/cf2nand/rootfs -rmdir /tmp/cf2nand/rootfs -rmdir /tmp/cf2nand - diff --git a/target/linux/rb532/base-files/default/sbin/wget2nand b/target/linux/rb532/base-files/default/sbin/wget2nand deleted file mode 100755 index 67e4a94a8..000000000 --- a/target/linux/rb532/base-files/default/sbin/wget2nand +++ /dev/null @@ -1,65 +0,0 @@ -#!/bin/sh -# wget2nand -# This script can be used to download a TGZ file from your build system which -# contains the files to be installed on the NAND flash on your RB1xx card. -# The one parameter is the URL of the TGZ file to be downloaded. -# Licence GPL V2 -# Author david.goodenough@linkchoose.co.uk -# Based on cf2nand from RB532 support -. /etc/functions.sh - -[ -d /tmp/wget2nand ] && { - echo "/tmp/wget2nand already exists" - exit 1 -} - -# first get an address for br-lan using udhcpc -killall udhcpc -/sbin/udhcpc -i br-lan - -# need to find the wget server from the command line -url=$1 -[ -z "$url" ] && { - echo "No URL specified for image TGZ" - echo "Usage : $0 URL" - exit 1 -} - -boot="$(find_mtd_part 'RouterBoard NAND Boot')" -main="$(find_mtd_part 'rootfs')" -[ -z "$boot" -o -z "$main" ] && { - echo "Cannot find NAND Flash partitions" - exit 1 -} - -echo "Erasing filesystem." -mtd erase Boot 2>/dev/null >/dev/null -mtd erase Main 2>/dev/null >/dev/null - -echo "Mounting $main as new root and $boot as boot partition" - -mkdir /tmp/wget2nand/ -mkdir /tmp/wget2nand-boot -mount -t yaffs2 "$main" /tmp/wget2nand/ -mount -t yaffs2 "$boot" /tmp/wget2nand-boot - -echo "Copying filesystem..." -( wget -O - $url/openwrt-rb532-2.6-rootfs.tgz) | ( cd /tmp/wget2nand/; tar xvz ) -wget -O /tmp/wget2nand-boot/kernel $url/openwrt-rb532-2.6-vmlinux - -# No need to patch the kernel, this was done during the build process -chmod +x /tmp/wget2nand-boot/kernel - -# make sure everything is written before we unmount the partitions -echo "chmod ugo+x /" > /tmp/wget2nand/etc/uci-defaults/set_root_permission -sync -ls /tmp/wget2nand-boot/ -ls /tmp/wget2nand/ -# unmount the partitions and remove the directories into which they were mounted -umount /tmp/wget2nand-boot -umount /tmp/wget2nand -rmdir /tmp/wget2nand-boot -rmdir /tmp/wget2nand - -# all done -echo "Image written, you can now reboot. Remember to change the boot source to Boot from Nand" diff --git a/target/linux/rb532/base-files/etc/config/network b/target/linux/rb532/base-files/etc/config/network new file mode 100644 index 000000000..827969057 --- /dev/null +++ b/target/linux/rb532/base-files/etc/config/network @@ -0,0 +1,12 @@ +# Copyright (C) 2006 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0 + option proto dhcp + diff --git a/target/linux/rb532/base-files/etc/diag.sh b/target/linux/rb532/base-files/etc/diag.sh new file mode 100644 index 000000000..d8f9a8825 --- /dev/null +++ b/target/linux/rb532/base-files/etc/diag.sh @@ -0,0 +1,19 @@ +#!/bin/sh +# Copyright (C) 2007 OpenWrt.org + +set_led() { + local led="$1" + local state="$2" + [ -d "/sys/class/leds/rb500led:$led" ] && echo "$state" > "/sys/class/leds/rb500led:$led/brightness" +} + +set_state() { + case "$1" in + preinit) + set_led amber 1 + ;; + done) + set_led amber 0 + ;; + esac +} diff --git a/target/linux/rb532/base-files/sbin/cf2nand b/target/linux/rb532/base-files/sbin/cf2nand new file mode 100755 index 000000000..fb3717499 --- /dev/null +++ b/target/linux/rb532/base-files/sbin/cf2nand @@ -0,0 +1,62 @@ +#!/bin/sh +. /etc/functions.sh + +copy_kernel() { + local input="$1" + local output="$2" + local cmdline="$3" + size="$(echo -n "$cmdline" | wc -c)" + dd if="$input" bs=3M count=1 > "$output" + /sbin/patch-cmdline "$output" "$cmdline" +} + +fstype="$(mount | grep ' / ' | awk '$5 != "rootfs" {print $5}')" +case "$fstype" in + ext2|jffs2) echo "Copying from $fstype to yaffs2";; + *) echo "Invalid filesystem."; exit 1;; +esac + +[ -d /tmp/cf2nand ] && { + echo "/tmp/cf2nand already exists" + exit 1 +} + +mkdir /tmp/cf2nand +mkdir /tmp/cf2nand/rootfs +mount -t "$fstype" /dev/root /tmp/cf2nand/rootfs || { + echo "Mounting rootfs failed." + exit 1 +} + +boot="$(find_mtd_part 'RouterBoard NAND Boot')" +main="$(find_mtd_part 'RouterBoard NAND Main')" +[ -z "$boot" -o -z "$main" ] && { + echo "Cannot find NAND Flash partitions" + exit 1 +} + +echo "Erasing filesystem..." +mtd erase Boot 2>/dev/null >/dev/null +mtd erase Main 2>/dev/null >/dev/null + +mkdir /tmp/cf2nand/p1 +mkdir /tmp/cf2nand/p2 +mount -t yaffs2 "$boot" /tmp/cf2nand/p1 +mount -t yaffs2 "$main" /tmp/cf2nand/p2 + +echo "Copying kernel..." +copy_kernel /dev/cf/card0/part1 /tmp/cf2nand/p1/kernel "root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit " 2>/dev/null >/dev/null +umount /tmp/cf2nand/p1 +rmdir /tmp/cf2nand/p1 + +echo "Copying filesystem..." +( cd /tmp/cf2nand/rootfs; tar c . ) | ( cd /tmp/cf2nand/p2; tar x ) +echo "chmod ugo+x /" > /tmp/cf2nand/p2/etc/uci-defaults/set_root_permission +sync +umount /tmp/cf2nand/p2 +rmdir /tmp/cf2nand/p2 + +umount /tmp/cf2nand/rootfs +rmdir /tmp/cf2nand/rootfs +rmdir /tmp/cf2nand + diff --git a/target/linux/rb532/base-files/sbin/wget2nand b/target/linux/rb532/base-files/sbin/wget2nand new file mode 100755 index 000000000..67e4a94a8 --- /dev/null +++ b/target/linux/rb532/base-files/sbin/wget2nand @@ -0,0 +1,65 @@ +#!/bin/sh +# wget2nand +# This script can be used to download a TGZ file from your build system which +# contains the files to be installed on the NAND flash on your RB1xx card. +# The one parameter is the URL of the TGZ file to be downloaded. +# Licence GPL V2 +# Author david.goodenough@linkchoose.co.uk +# Based on cf2nand from RB532 support +. /etc/functions.sh + +[ -d /tmp/wget2nand ] && { + echo "/tmp/wget2nand already exists" + exit 1 +} + +# first get an address for br-lan using udhcpc +killall udhcpc +/sbin/udhcpc -i br-lan + +# need to find the wget server from the command line +url=$1 +[ -z "$url" ] && { + echo "No URL specified for image TGZ" + echo "Usage : $0 URL" + exit 1 +} + +boot="$(find_mtd_part 'RouterBoard NAND Boot')" +main="$(find_mtd_part 'rootfs')" +[ -z "$boot" -o -z "$main" ] && { + echo "Cannot find NAND Flash partitions" + exit 1 +} + +echo "Erasing filesystem." +mtd erase Boot 2>/dev/null >/dev/null +mtd erase Main 2>/dev/null >/dev/null + +echo "Mounting $main as new root and $boot as boot partition" + +mkdir /tmp/wget2nand/ +mkdir /tmp/wget2nand-boot +mount -t yaffs2 "$main" /tmp/wget2nand/ +mount -t yaffs2 "$boot" /tmp/wget2nand-boot + +echo "Copying filesystem..." +( wget -O - $url/openwrt-rb532-2.6-rootfs.tgz) | ( cd /tmp/wget2nand/; tar xvz ) +wget -O /tmp/wget2nand-boot/kernel $url/openwrt-rb532-2.6-vmlinux + +# No need to patch the kernel, this was done during the build process +chmod +x /tmp/wget2nand-boot/kernel + +# make sure everything is written before we unmount the partitions +echo "chmod ugo+x /" > /tmp/wget2nand/etc/uci-defaults/set_root_permission +sync +ls /tmp/wget2nand-boot/ +ls /tmp/wget2nand/ +# unmount the partitions and remove the directories into which they were mounted +umount /tmp/wget2nand-boot +umount /tmp/wget2nand +rmdir /tmp/wget2nand-boot +rmdir /tmp/wget2nand + +# all done +echo "Image written, you can now reboot. Remember to change the boot source to Boot from Nand" -- cgit v1.2.3