From 3260740c920ea811e18bc1743c863fce74ac89b7 Mon Sep 17 00:00:00 2001 From: florian Date: Mon, 2 Apr 2007 16:59:59 +0000 Subject: Add preliminary RouterBoard RB1xx support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6839 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../rb1xx-2.6/files/arch/mips/adm5120/Makefile | 7 + .../files/arch/mips/adm5120/adm5120_info.c | 186 +++++++++++++++++++++ .../linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c | 156 +++++++++++++++++ .../rb1xx-2.6/files/arch/mips/adm5120/memory.c | 135 +++++++++++++++ .../rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S | 135 +++++++++++++++ .../linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c | 118 +++++++++++++ .../rb1xx-2.6/files/arch/mips/adm5120/setup.c | 106 ++++++++++++ .../rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c | 63 +++++++ .../rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c | 96 +++++++++++ 9 files changed, 1002 insertions(+) create mode 100644 target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile create mode 100644 target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c create mode 100644 target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c create mode 100644 target/linux/rb1xx-2.6/files/arch/mips/adm5120/memory.c create mode 100644 target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S create mode 100644 target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c create mode 100644 target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c create mode 100644 target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c create mode 100644 target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c (limited to 'target/linux/rb1xx-2.6/files/arch') diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile new file mode 100644 index 000000000..a68b4a145 --- /dev/null +++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel +# + +obj-y := setup.o prom.o irq.o memory.o mipsIRQ.o adm5120_info.o + +EXTRA_AFLAGS := $(CFLAGS) diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c new file mode 100644 index 000000000..18e267479 --- /dev/null +++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/adm5120_info.c @@ -0,0 +1,186 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +/* boot loaders specific definitions */ +#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE from other bootloaders */ + +struct adm5120_info adm5120_info = { + .cpu_speed = CPU_SPEED_175, + .cpu_package = CPU_PACKAGE_PQFP, + .boot_loader = BOOT_LOADER_UNKNOWN, + .board_type = BOARD_TYPE_UNKNOWN +}; + +static char *boot_loader_names[BOOT_LOADER_LAST+1] = { + [BOOT_LOADER_UNKNOWN] = "Unknown", + [BOOT_LOADER_CFE] = "CFE", + [BOOT_LOADER_UBOOT] = "U-Boot", + [BOOT_LOADER_MYLOADER] = "MyLoader" +}; + +/* + * CPU settings detection + */ +#define CODE_GET_PC(c) ((c) & CODE_PC_MASK) +#define CODE_GET_REV(c) (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK) +#define CODE_GET_PK(c) (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK) +#define CODE_GET_CLKS(c) (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK) +#define CODE_GET_NAB(c) (((c) & CODE_NAB) != 0) + +static void __init detect_cpu_info(void) +{ + uint32_t *reg; + uint32_t code; + uint32_t clks; + + reg = (uint32_t *)KSEG1ADDR(ADM5120_SWITCH_BASE+SWITCH_REG_CODE); + code = *reg; + + clks = CODE_GET_CLKS(code); + + adm5120_info.product_code = CODE_GET_PC(code); + adm5120_info.revision = CODE_GET_REV(code); + + adm5120_info.cpu_speed = CPU_SPEED_175; + if (clks & 1) + adm5120_info.cpu_speed += 25000000; + if (clks & 2) + adm5120_info.cpu_speed += 50000000; + + adm5120_info.cpu_package = (CODE_GET_PK(code) == CODE_PK_BGA) ? + CPU_PACKAGE_BGA : CPU_PACKAGE_PQFP; + + adm5120_info.nand_boot = CODE_GET_NAB(code); + +} + +/* + * Boot loader detection routines + */ +static int __init detect_cfe(void) +{ + /* + * This method only works, when we are booted directly from the CFE. + */ + uint32_t cfe_handle = (uint32_t) fw_arg0; + uint32_t cfe_a1_val = (uint32_t) fw_arg1; + uint32_t cfe_entry = (uint32_t) fw_arg2; + uint32_t cfe_seal = (uint32_t) fw_arg3; + + /* Check for CFE by finding the CFE magic number */ + if (cfe_seal != CFE_EPTSEAL) { + /* We are not booted from CFE */ + return 0; + } + + /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 SoC */ + if (cfe_a1_val != 0) { + return 0; + } + + /* The cfe_handle, and the cfe_entry must be kernel mode addresses */ + if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) { + return 0; + } + + return 1; +} + +static int __init detect_uboot(void) +{ + /* FIXME: not yet implemented */ + return 0; +} + +static int __init detect_myloader(void) +{ + struct mylo_system_params *sysp; + struct mylo_board_params *boardp; + struct mylo_partition_table *parts; + + sysp = (struct mylo_system_params *)(MYLO_MIPS_SYS_PARAMS); + boardp = (struct mylo_board_params *)(MYLO_MIPS_BOARD_PARAMS); + parts = (struct mylo_partition_table *)(MYLO_MIPS_PARTITIONS); + + /* Check for some magic numbers */ + if ((sysp->magic != MYLO_MAGIC_SYS_PARAMS) || + (boardp->magic != MYLO_MAGIC_BOARD_PARAMS) || + (parts->magic != MYLO_MAGIC_PARTITIONS)) + return 0; + + return 1; +} + +static int __init detect_routerboot(void) +{ + /* FIXME: not yet implemented */ + return 0; +} + +static int __init detect_bootloader(void) +{ + if (detect_cfe()) + return BOOT_LOADER_CFE; + + if (detect_uboot()) + return BOOT_LOADER_UBOOT; + + if (detect_myloader()) + return BOOT_LOADER_MYLOADER; + + if (detect_routerboot()) + return BOOT_LOADER_ROUTERBOOT; + + return BOOT_LOADER_UNKNOWN; +} + +/* + * Board detection + */ +static void __init detect_board_type(void) +{ + /* FIXME: not yet implemented */ +} + +void __init adm5120_info_show(void) +{ + printk("ADM%04X%s revision %d, running at %ldMHz\n", + adm5120_info.product_code, + (adm5120_info.cpu_package == CPU_PACKAGE_BGA) ? "" : "P", + adm5120_info.revision, + (adm5120_info.cpu_speed / 1000000) + ); + printk("Boot loader is: %s\n", boot_loader_names[adm5120_info.boot_loader]); + printk("Booted from : %s flash\n", adm5120_info.nand_boot ? "NAND" : "NOR"); +} + +void __init adm5120_info_init(void) +{ + detect_cpu_info(); + adm5120_info.boot_loader = detect_bootloader(); + detect_board_type(); + + adm5120_info_show(); +} diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c new file mode 100644 index 000000000..46f3bb05e --- /dev/null +++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/irq.c @@ -0,0 +1,156 @@ +/* + * Copyright (C) ADMtek Incorporated. + * Creator : daniell@admtek.com.tw + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000, 2001 MIPS Technologies, Inc. + * Copyright (C) 2001 Ralf Baechle + * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define MIPS_CPU_TIMER_IRQ 7 + +extern int setup_irq(unsigned int irq, struct irqaction *irqaction); +extern irq_desc_t irq_desc[]; +extern asmlinkage void mipsIRQ(void); + +int mips_int_lock(void); +void mips_int_unlock(int); + +unsigned int mips_counter_frequency; + +#define ADM5120_INTC_REG(reg) (*(volatile u32 *)(KSEG1ADDR(0x12200000+(reg)))) +#define ADM5120_INTC_STATUS ADM5120_INTC_REG(0x00) +#define ADM5120_INTC_ENABLE ADM5120_INTC_REG(0x08) +#define ADM5120_INTC_DISABLE ADM5120_INTC_REG(0x0c) +#define ADM5120_IRQ_MAX 9 +#define ADM5120_IRQ_MASK 0x3ff + +void adm5120_hw0_irqdispatch(struct pt_regs *regs) +{ + unsigned long intsrc; + int i; + + intsrc = ADM5120_INTC_STATUS & ADM5120_IRQ_MASK; + + for (i = 0; intsrc; intsrc >>= 1, i++) + if (intsrc & 0x1) + do_IRQ(i); + else + spurious_interrupt(); +} + +void mips_timer_interrupt(struct pt_regs *regs) +{ + write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ); + ll_timer_interrupt(MIPS_CPU_TIMER_IRQ); +} + +/* Main interrupt dispatcher */ +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int cp0_cause = read_c0_cause() & read_c0_status(); + + if (cp0_cause & CAUSEF_IP7) { + mips_timer_interrupt( regs); + } else if (cp0_cause & CAUSEF_IP2) { + adm5120_hw0_irqdispatch( regs); + } +} + +void enable_adm5120_irq(unsigned int irq) +{ + int s; + + /* Disable all interrupts (FIQ/IRQ) */ + s = mips_int_lock(); + + if ((irq < 0) || (irq > ADM5120_IRQ_MAX)) + goto err_exit; + + ADM5120_INTC_ENABLE = (1< ADM5120_IRQ_MAX)) + goto err_exit; + + ADM5120_INTC_DISABLE = (1< +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +extern char *prom_getenv(char *envname); + +#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK) + +#define ADM5120_MEMCTRL 0x1200001c +#define ADM5120_MEMCTRL_SDRAM_MASK 0x7 + +static const unsigned long adm_sdramsize[] __initdata = { + 0x0, /* Reserved */ + 0x0400000, /* 4Mb */ + 0x0800000, /* 8Mb */ + 0x1000000, /* 16Mb */ + 0x4000000, /* 64Mb */ + 0x8000000, /* 128Mb */ +}; + +/* determined physical memory size, not overridden by command line args */ +unsigned long physical_memsize = 0L; + +struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; + +struct prom_pmemblock * __init prom_getmdesc(void) +{ + char *memsize_str; + unsigned int memsize; + char cmdline[CL_SIZE], *ptr; + + memsize_str = prom_getenv("memsize"); + + if (!memsize_str) + { + prom_printf("memsize not set in boot prom, set to default (8Mb)\n"); + physical_memsize = 0x00800000; + } + else +#ifdef DEBUG + prom_printf("prom_memsize = %s\n", memsize_str); +#endif + physical_memsize = simple_strtol(memsize_str, NULL, 0); + + /* Check the command line for a memsize directive that overrides + * the physical/default amount */ + strcpy(cmdline, arcs_cmdline); + ptr = strstr(cmdline, "memsize="); + if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) + ptr = strstr(ptr, " memsize="); + + if (ptr) + memsize = memparse(ptr + 8, &ptr); + else + memsize = physical_memsize; + + memset(mdesc, 0, sizeof(mdesc)); + + mdesc[0].type = BOOT_MEM_RAM; + mdesc[0].base = CPHYSADDR(PFN_ALIGN(&_end)); + mdesc[0].size = memsize - mdesc[0].base; + + return &mdesc[0]; +} + +void __init prom_meminit(void) +{ + struct prom_pmemblock *p; + + p = prom_getmdesc(); + + while (p->size) + { + long type; + unsigned long base, size; + base = p->base; + type = p->type, + size = p->size; + add_memory_region(base, size, type); + p++; + } +} + +#if 0 +void __init prom_meminit(void) +{ + unsigned long base = CPHYSADDR(PFN_ALIGN(&_end)); + unsigned long size; + + u32 memctrl = *(u32*)KSEG1ADDR(ADM5120_MEMCTRL); + size = adm_sdramsize[memctrl & ADM5120_MEMCTRL_SDRAM_MASK]; + add_memory_region(base, size-base, BOOT_MEM_RAM); +} +#endif + +unsigned long __init prom_free_prom_memory(void) +{ + /* We do not have to prom memory to free */ + return 0; +} diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S new file mode 100644 index 000000000..f118fb402 --- /dev/null +++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/mipsIRQ.S @@ -0,0 +1,135 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Interrupt exception dispatch code. + * + */ +#include + +#include +#include +#include +#include + +#define STATUS_IE 0x00000001 + +/* A lot of complication here is taken away because: + * + * 1) We handle one interrupt and return, sitting in a loop and moving across + * all the pending IRQ bits in the cause register is _NOT_ the answer, the + * common case is one pending IRQ so optimize in that direction. + * + * 2) We need not check against bits in the status register IRQ mask, that + * would make this routine slow as hell. + * + * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in + * between like BSD spl() brain-damage. + * + * Furthermore, the IRQs on the MIPS board look basically (barring software + * IRQs which we don't use at all and all external interrupt sources are + * combined together on hardware interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware (ignored) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * Note: On the SEAD board thing are a little bit different. + * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired + * wired to UART1. + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ + + .text + .set noreorder + .set noat + .align 5 + +NESTED(mipsIRQ, PT_SIZE, sp) + SAVE_ALL + CLI + .set at + + mfc0 s0, CP0_CAUSE + mfc0 s1, CP0_STATUS + and s0, s0, s1 + + /* First we check for r4k counter/timer IRQ. */ + andi a0, s0, CAUSEF_IP7 + beq a0, zero, 1f + nop + + move a0, sp + jal mips_timer_interrupt + nop + + j ret_from_irq + nop + +1: + andi a0, s0, CAUSEF_IP2 + beq a0, zero, 1f + nop + + move a0, sp + jal adm5120_hw0_irqdispatch + nop +1: + j ret_from_irq + nop + +END(mipsIRQ) + + +LEAF(mips_int_lock) + .set noreorder + mfc0 v0, CP0_STATUS + li v1, ~STATUS_IE + and v1, v1, v0 + mtc0 v1, CP0_STATUS + j ra + and v0, v0, STATUS_IE + .set reorder +END(mips_int_lock) + + +LEAF(mips_int_unlock) + mfc0 v0, CP0_STATUS + and a0, a0, STATUS_IE + or v0, v0, a0 + mtc0 v0, CP0_STATUS + j ra + nop +END(mips_int_unlock) + diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c new file mode 100644 index 000000000..e644fc37c --- /dev/null +++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/prom.c @@ -0,0 +1,118 @@ +/***************************************************************************** + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2003 ADMtek Incorporated. + * daniell@admtek.com.tw + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + *****************************************************************************/ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +void setup_prom_printf(int); +void prom_printf(char *, ...); +void prom_meminit(void); + +#define ADM5120_ENVC 1 + +char *adm5120_envp[2*ADM5120_ENVC] = {"memsize","0x001000000"}; + +#define READCSR(r) *(volatile unsigned long *)(0xB2600000+(r)) +#define WRITECSR(r,v) *(volatile unsigned long *)(0xB2600000+(r)) = v + +#define UART_DR_REG 0x00 +#define UART_FR_REG 0x18 +#define UART_TX_FIFO_FULL 0x20 + +int putPromChar(char c) +{ + WRITECSR(UART_DR_REG, c); + while ( (READCSR(UART_FR_REG) & UART_TX_FIFO_FULL) ); + return 0; +} + +/* + * Ugly prom_printf used for debugging + */ + +void prom_printf(char *fmt, ...) +{ + va_list args; + int l; + char *p, *buf_end; + char buf[1024]; + + va_start(args, fmt); + l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */ + va_end(args); + + buf_end = buf + l; + + for (p = buf; p < buf_end; p++) { + /* Crude cr/nl handling is better than none */ + if (*p == '\n') + putPromChar('\r'); + putPromChar(*p); + } +} + +char *prom_getenv(char *envname) +{ + int i, index=0; + + i = strlen(envname); + + printk(KERN_INFO "GETENV: envname is %s\n", envname); + + while(index < (2*ADM5120_ENVC)) { + if(strncmp(envname, adm5120_envp[index], i) == 0) { + printk(KERN_INFO "GETENV: returning %s\n", adm5120_envp[index+1]); + return(adm5120_envp[index+1]); + } + index += 2; + } + + printk(KERN_INFO "GETENV: not found.\n"); + return(NULL); +} + + +/* + * initialize the prom module. + */ +void __init prom_init(void) +{ + /* you should these macros defined in include/asm/bootinfo.h */ + mips_machgroup = MACH_GROUP_ADM_GW; + mips_machtype = MACH_ADM_GW_5120; + + adm5120_info_init(); + + /* init command line, register a default kernel command line */ + strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit"); + + /* init memory map */ + prom_meminit(); +} diff --git a/target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c new file mode 100644 index 000000000..1b99d7799 --- /dev/null +++ b/target/linux/rb1xx-2.6/files/arch/mips/adm5120/setup.c @@ -0,0 +1,106 @@ +/* + * Copyright (C) ADMtek Incorporated. + * Creator : daniell@admtek.com.tw + * Copyright 1999, 2000 MIPS Technologies, Inc. + * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005 + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include + +#define ADM5120_SOFTRESET 0x12000004 +#define STATUS_IE 0x00000001 +#define ALLINTS (IE_IRQ0 | IE_IRQ5 | STATUS_IE) + +void mips_time_init(void); + +extern unsigned int mips_counter_frequency; + +void adm5120_restart(char *command) +{ + *(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1; +} + + +void adm5120_halt(void) +{ + printk(KERN_NOTICE "\n** You can safely turn off the power\n"); + while (1); +} + + +void adm5120_power_off(void) +{ + adm5120_halt(); +} + +void __init adm5120_time_init(void) +{ + mips_counter_frequency = adm5120_info.cpu_speed >> 1; +} + +void __init plat_timer_setup(struct irqaction *irq) +{ + /* to generate the first timer interrupt */ + write_c0_compare(read_c0_count()+ mips_counter_frequency/HZ); + clear_c0_status(ST0_BEV); + set_c0_status(ALLINTS); +} + +void __init plat_mem_setup(void) +{ + printk(KERN_INFO "ADM5120 board setup\n"); + + board_time_init = adm5120_time_init; + //board_timer_setup = mips_timer_setup; + + _machine_restart = adm5120_restart; + _machine_halt = adm5120_halt; + pm_power_off = adm5120_power_off; + + set_io_port_base(KSEG1); +} + +const char *get_system_type(void) +{ + return "ADM5120 Board"; +} + +static struct resource adm5120_hcd_resources[] = { + [0] = { + .start = 0x11200000, + .end = 0x11200084, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x3, + .end = 0x3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device adm5120hcd_device = { + .name = "adm5120-hcd", + .id = -1, + .num_resources = ARRAY_SIZE(adm5120_hcd_resources), + .resource = adm5120_hcd_resources, +}; + +static struct platform_device *devices[] __initdata = { + &adm5120hcd_device, +}; + +static int __init adm5120_init(void) +{ + return platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +subsys_initcall(adm5120_init); diff --git a/target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c b/target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c new file mode 100644 index 000000000..91dae8999 --- /dev/null +++ b/target/linux/rb1xx-2.6/files/arch/mips/pci/ops-adm5120.c @@ -0,0 +1,63 @@ +/* + * Copyright (C) ADMtek Incorporated. + * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) + * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2007 OpenWrt.org + */ + +#include +#include +#include +#include +#include + +#include + +volatile u32* pci_config_address_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_ADDR); +volatile u32* pci_config_data_reg = (volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA); + +#define PCI_ENABLE 0x80000000 + +static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t *val) +{ + *pci_config_address_reg = ((bus->number & 0xff) << 0x10) | + ((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE; + switch (size) { + case 1: + *val = ((*pci_config_data_reg)>>((where&3)<<3))&0xff; + break; + case 2: + *val = ((*pci_config_data_reg)>>((where&3)<<3))&0xffff; + break; + default: + *val = (*pci_config_data_reg); + } + return PCIBIOS_SUCCESSFUL; +} + +static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t val) +{ + *pci_config_address_reg = ((bus->number & 0xff) << 0x10) | + ((devfn & 0xff) << 0x08) | (where & 0xfc) | PCI_ENABLE; + switch (size) { + case 1: + *(volatile u8 *)(((int)pci_config_data_reg) + + (where & 3)) = val; + break; + case 2: + *(volatile u16 *)(((int)pci_config_data_reg) + + (where & 2)) = (val); + break; + default: + *pci_config_data_reg = (val); + } + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops adm5120_pci_ops = { + .read = pci_config_read, + .write = pci_config_write, +}; diff --git a/target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c b/target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c new file mode 100644 index 000000000..78de001c5 --- /dev/null +++ b/target/linux/rb1xx-2.6/files/arch/mips/pci/pci-adm5120.c @@ -0,0 +1,96 @@ +/* + * Copyright (C) ADMtek Incorporated. + * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) + * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2007 OpenWrt.org + */ + +#include +#include +#include +#include +#include + +#include +#include + +extern struct pci_ops adm5120_pci_ops; + +#define PCI_CMM_IOACC_EN 0x1 +#define PCI_CMM_MEMACC_EN 0x2 +#define PCI_CMM_MASTER_EN 0x4 +#define PCI_CMM_DEF \ + (PCI_CMM_IOACC_EN | PCI_CMM_MEMACC_EN | PCI_CMM_MASTER_EN) + +#define PCI_DEF_CACHE_LINE_SZ 4 + + +struct resource pci_io_resource = { + .name = "ADM5120 PCI I/O", + .start = ADM5120_PCIIO_BASE, + .end = ADM5120_PCICFG_ADDR-1, + .flags = IORESOURCE_IO +}; + +struct resource pci_mem_resource = { + .name = "ADM5120 PCI MEM", + .start = ADM5120_PCIMEM_BASE, + .end = ADM5120_PCIIO_BASE-1, + .flags = IORESOURCE_MEM +}; + +static struct pci_controller adm5120_controller = { + .pci_ops = &adm5120_pci_ops, + .io_resource = &pci_io_resource, + .mem_resource = &pci_mem_resource, +}; + +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot < 2 || slot > 4) + return -1; + return slot + 4; +} + +static void adm5120_pci_fixup(struct pci_dev *dev) +{ + if (dev->devfn == 0) { + pci_write_config_word(dev, PCI_COMMAND, PCI_CMM_DEF); + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, + PCI_DEF_CACHE_LINE_SZ); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0); + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, adm5120_pci_fixup); + + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +static int __init adm5120_pci_setup(void) +{ + int pci_bios; + + pci_bios = adm5120_has_pci(); + + printk("adm5120: system has %sPCI BIOS\n", pci_bios ? "" : "no "); + if (pci_bios == 0) + return 1; + + /* Avoid ISA compat ranges. */ + PCIBIOS_MIN_IO = 0x00000000; + PCIBIOS_MIN_MEM = 0x00000000; + + /* Set I/O resource limits. */ + ioport_resource.end = 0x1fffffff; + iomem_resource.end = 0xffffffff; + + register_pci_controller(&adm5120_controller); + return 0; +} + +subsys_initcall(adm5120_pci_setup); -- cgit v1.2.3