From 07c8d27309c0b6a734a012f7b6913a8e815f49eb Mon Sep 17 00:00:00 2001 From: juhosg Date: Mon, 13 Feb 2012 15:17:59 +0000 Subject: ramips: add preliminary support for the RT3662/RT3883 SoCs git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30495 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../patches-2.6.39/200-rt3883-ehci-glue.patch | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch (limited to 'target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch') diff --git a/target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch b/target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch new file mode 100644 index 000000000..d01bd4702 --- /dev/null +++ b/target/linux/ramips/patches-2.6.39/200-rt3883-ehci-glue.patch @@ -0,0 +1,32 @@ +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -202,6 +202,15 @@ config USB_CNS3XXX_EHCI + It is needed for high-speed (480Mbit/sec) USB 2.0 device + support. + ++config USB_EHCI_RT3883 ++ bool "EHCI support for Ralink RT3662/RT3883 SoCs" ++ depends on USB_EHCI_HCD && SOC_RT3883 ++ select USB_EHCI_ROOT_HUB_TT ++ default y ++ ---help--- ++ Enables support for the built-in EHCI controller present ++ on the Ralink RT3883 SoC. ++ + config USB_OXU210HP_HCD + tristate "OXU210HP HCD support" + depends on USB +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -1267,6 +1267,11 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER tegra_ehci_driver + #endif + ++#ifdef CONFIG_USB_EHCI_RT3883 ++#include "ehci-rt3883.c" ++#define PLATFORM_DRIVER ehci_rt3883_driver ++#endif ++ + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ + !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ + !defined(XILINX_OF_PLATFORM_DRIVER) -- cgit v1.2.3