From 2f625c59a49d00eab374b111d566194a516edb79 Mon Sep 17 00:00:00 2001
From: blogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Mon, 6 May 2013 16:44:56 +0000
Subject: ramips: unbreak rt2880 support

Signed-off-by: John Crsipin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36559 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 target/linux/ramips/dts/V11STFE.dts | 93 +++++++++++++++++++++++++++++++++++++
 1 file changed, 93 insertions(+)
 create mode 100644 target/linux/ramips/dts/V11STFE.dts

(limited to 'target/linux/ramips/dts/V11STFE.dts')

diff --git a/target/linux/ramips/dts/V11STFE.dts b/target/linux/ramips/dts/V11STFE.dts
new file mode 100644
index 000000000..20cbaea49
--- /dev/null
+++ b/target/linux/ramips/dts/V11STFE.dts
@@ -0,0 +1,93 @@
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+	compatible = "V11ST-FE", "ralink,rt2880-soc";
+	model = "Ralink V11ST-FE";
+
+	palmbus@300000 {
+		sysc@0 {
+			ralink,pinmux = "uartlite";
+			ralink,gpiomux = "i2c", "jtag";
+			ralink,uartmux = "gpio";
+			ralink,pcimux = "pci-fnc";
+			ralink,wdtmux = <0>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+	};
+
+	ethernet@400000 {
+		status = "okay";
+	};
+
+	wmac@480000 {
+		status = "okay";
+	};
+
+	pci@10140000 {
+		status = "okay";
+
+		host-bridge {
+			pci-bridge@1 {
+				status = "okay";
+			};
+		};
+	};
+
+	nor-flash@1c000000 {
+		compatible = "cfi-flash";
+		reg = <0x1c000000 0x800000>;
+
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x0 0x0030000>;
+			label = "u-boot";
+			read-only;
+		};
+
+		partition@30000 {
+			reg = <0x00030000 0x00010000>;
+			label = "u-boot-env";
+			read-only;
+		};
+
+		partition@40000 {
+			reg = <0x00040000 0x00010000>;
+			label = "factory";
+			read-only;
+		};
+
+		partition@50000 {
+			reg = <0x00050000 0x003b0000>;
+			label = "firmware";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 0>;
+			linux,code = <0x211>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "v11st-fe:green:status";
+			gpios = <&gpio0 12 1>;
+		};
+	};
+};
-- 
cgit v1.2.3