From 06add573432748d358446a672850740e3510f9a9 Mon Sep 17 00:00:00 2001 From: juhosg Date: Mon, 23 Apr 2012 16:56:05 +0000 Subject: ramips: rt305x: add support for the Asus WL-330N3G board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds support for the ASUS WL-330N3G Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led. The bi-color led is driven by 2 gpio. I don't know how to handle this, so I simply made 2 leds : one red, one blue. But the red light takes precedence over the blue one according to the chart below. r = led is red b = led is blue 0 = led is off xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness initial state action led gpio state r0 b0 r0->r1 r r0 b0 r0 b0 b0->b1 b r0 b1 r1 b0 r1->r0 0 r0 b0 r1 b0 b0->b1 r r1 *b1* r1 b1 r1->r0 b r0 b1 r1 b1 b1->b0 r r1 b0 r0 b1 r0->r1 r r1 *b1* r0 b1 b1->b0 0 r0 r0 Signed-off-by: Frédéric Leroy git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31450 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ramips/base-files/etc/diag.sh | 2 +- target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'target/linux/ramips/base-files/etc') diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 2d351d61c..bb70fe714 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -69,7 +69,7 @@ get_status_led() { rt-n10-plus) status_led="asus:green:wps" ;; - rt-n56u | wl-330n ) + rt-n56u | wl-330n | wl-330n3g) status_led="asus:blue:power" ;; sl-r7205) diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 34821ec87..7937d76bd 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -70,6 +70,7 @@ case "$FIRMWARE" in wcr-150gn | \ whr-g300n | \ wl-330n | \ + wl-330n3g | \ wl-351 | \ wli-tx4-ag300n | \ wr512-3gn | \ -- cgit v1.2.3