From 2d3a55136a3944878696753837386bc6593bb82b Mon Sep 17 00:00:00 2001 From: juhosg Date: Fri, 18 May 2012 20:22:32 +0000 Subject: omap24xx: add support for 3.3 Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31810 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/omap24xx/patches-3.3/250-cbus.patch | 3463 ++++++++++++++++++++++ 1 file changed, 3463 insertions(+) create mode 100644 target/linux/omap24xx/patches-3.3/250-cbus.patch (limited to 'target/linux/omap24xx/patches-3.3/250-cbus.patch') diff --git a/target/linux/omap24xx/patches-3.3/250-cbus.patch b/target/linux/omap24xx/patches-3.3/250-cbus.patch new file mode 100644 index 000000000..b152a00b5 --- /dev/null +++ b/target/linux/omap24xx/patches-3.3/250-cbus.patch @@ -0,0 +1,3463 @@ +--- /dev/null ++++ b/drivers/cbus/cbus.c +@@ -0,0 +1,335 @@ ++/* ++ * drivers/cbus/cbus.c ++ * ++ * Support functions for CBUS serial protocol ++ * ++ * Copyright (C) 2004-2010 Nokia Corporation ++ * Contact: Felipe Balbi ++ * ++ * Written by Juha Yrjölä , ++ * David Weinehall , and ++ * Mikko Ylinen ++ * ++ * Several updates and cleanups by Felipe Balbi ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "cbus.h" ++ ++#define CBUS_XFER_READ 1 ++#define CBUS_XFER_WRITE 0 ++ ++struct cbus_host { ++ /* host lock */ ++ spinlock_t lock; ++ ++ struct device *dev; ++ ++ int clk_gpio; ++ int dat_gpio; ++ int sel_gpio; ++}; ++ ++/** ++ * cbus_send_bit - sends one bit over the bus ++ * @host: the host we're using ++ * @bit: one bit of information to send ++ * @input: whether to set data pin as input after sending ++ */ ++static int cbus_send_bit(struct cbus_host *host, unsigned bit, ++ unsigned input) ++{ ++ int ret = 0; ++ ++ gpio_set_value(host->dat_gpio, bit ? 1 : 0); ++ gpio_set_value(host->clk_gpio, 1); ++ ++ /* The data bit is read on the rising edge of CLK */ ++ if (input) ++ ret = gpio_direction_input(host->dat_gpio); ++ ++ gpio_set_value(host->clk_gpio, 0); ++ ++ return ret; ++} ++ ++/** ++ * cbus_send_data - sends @len amount of data over the bus ++ * @host: the host we're using ++ * @data: the data to send ++ * @len: size of the transfer ++ * @input: whether to set data pin as input after sending ++ */ ++static int cbus_send_data(struct cbus_host *host, unsigned data, unsigned len, ++ unsigned input) ++{ ++ int ret = 0; ++ int i; ++ ++ for (i = len; i > 0; i--) { ++ ret = cbus_send_bit(host, data & (1 << (i - 1)), ++ input && (i == 1)); ++ if (ret < 0) ++ goto out; ++ } ++ ++out: ++ return ret; ++} ++ ++/** ++ * cbus_receive_bit - receives one bit from the bus ++ * @host: the host we're using ++ */ ++static int cbus_receive_bit(struct cbus_host *host) ++{ ++ int ret; ++ ++ gpio_set_value(host->clk_gpio, 1); ++ ret = gpio_get_value(host->dat_gpio); ++ if (ret < 0) ++ goto out; ++ gpio_set_value(host->clk_gpio, 0); ++ ++out: ++ return ret; ++} ++ ++/** ++ * cbus_receive_data - receives @len data from the bus ++ * @host: the host we're using ++ * @len: the length of data to receive ++ */ ++static int cbus_receive_data(struct cbus_host *host, unsigned len) ++{ ++ int ret = 0; ++ int i; ++ ++ for (i = 16; i > 0; i--) { ++ int bit = cbus_receive_bit(host); ++ ++ if (bit < 0) ++ goto out; ++ ++ if (bit) ++ ret |= 1 << (i - 1); ++ } ++ ++out: ++ return ret; ++} ++ ++/** ++ * cbus_transfer - transfers data over the bus ++ * @host: the host we're using ++ * @rw: read/write flag ++ * @dev: device address ++ * @reg: register address ++ * @data: if @rw == 0 data to send otherwise 0 ++ */ ++static int cbus_transfer(struct cbus_host *host, unsigned rw, unsigned dev, ++ unsigned reg, unsigned data) ++{ ++ unsigned long flags; ++ int input = 0; ++ int ret = 0; ++ ++ /* We don't want interrupts disturbing our transfer */ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ /* Reset state and start of transfer, SEL stays down during transfer */ ++ gpio_set_value(host->sel_gpio, 0); ++ ++ /* Set the DAT pin to output */ ++ gpio_direction_output(host->dat_gpio, 1); ++ ++ /* Send the device address */ ++ ret = cbus_send_data(host, dev, 3, 0); ++ if (ret < 0) { ++ dev_dbg(host->dev, "failed sending device addr\n"); ++ goto out; ++ } ++ ++ /* Send the rw flag */ ++ ret = cbus_send_bit(host, rw, 0); ++ if (ret < 0) { ++ dev_dbg(host->dev, "failed sending read/write flag\n"); ++ goto out; ++ } ++ ++ /* Send the register address */ ++ if (rw) ++ input = true; ++ ++ ret = cbus_send_data(host, reg, 5, input); ++ if (ret < 0) { ++ dev_dbg(host->dev, "failed sending register addr\n"); ++ goto out; ++ } ++ ++ if (!rw) { ++ ret = cbus_send_data(host, data, 16, 0); ++ if (ret < 0) { ++ dev_dbg(host->dev, "failed sending data\n"); ++ goto out; ++ } ++ } else { ++ gpio_set_value(host->clk_gpio, 1); ++ ++ ret = cbus_receive_data(host, 16); ++ if (ret < 0) { ++ dev_dbg(host->dev, "failed receiving data\n"); ++ goto out; ++ } ++ } ++ ++ /* Indicate end of transfer, SEL goes up until next transfer */ ++ gpio_set_value(host->sel_gpio, 1); ++ gpio_set_value(host->clk_gpio, 1); ++ gpio_set_value(host->clk_gpio, 0); ++ ++out: ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ return ret; ++} ++ ++/** ++ * cbus_read_reg - reads a given register from the device ++ * @child: the child device ++ * @dev: device address ++ * @reg: register address ++ */ ++int cbus_read_reg(struct device *child, unsigned dev, unsigned reg) ++{ ++ struct cbus_host *host = dev_get_drvdata(child->parent); ++ ++ return cbus_transfer(host, CBUS_XFER_READ, dev, reg, 0); ++} ++EXPORT_SYMBOL(cbus_read_reg); ++ ++/** ++ * cbus_write_reg - writes to a given register of the device ++ * @child: the child device ++ * @dev: device address ++ * @reg: register address ++ * @val: data to be written to @reg ++ */ ++int cbus_write_reg(struct device *child, unsigned dev, unsigned reg, ++ unsigned val) ++{ ++ struct cbus_host *host = dev_get_drvdata(child->parent); ++ ++ return cbus_transfer(host, CBUS_XFER_WRITE, dev, reg, val); ++} ++EXPORT_SYMBOL(cbus_write_reg); ++ ++static int __init cbus_bus_probe(struct platform_device *pdev) ++{ ++ struct cbus_host *chost; ++ struct cbus_host_platform_data *pdata = pdev->dev.platform_data; ++ int ret; ++ ++ chost = kzalloc(sizeof(*chost), GFP_KERNEL); ++ if (chost == NULL) ++ return -ENOMEM; ++ ++ spin_lock_init(&chost->lock); ++ ++ chost->clk_gpio = pdata->clk_gpio; ++ chost->dat_gpio = pdata->dat_gpio; ++ chost->sel_gpio = pdata->sel_gpio; ++ chost->dev = &pdev->dev; ++ ++ ret = gpio_request(chost->clk_gpio, "CBUS clk"); ++ if (ret < 0) ++ goto exit1; ++ ++ ret = gpio_request(chost->dat_gpio, "CBUS data"); ++ if (ret < 0) ++ goto exit2; ++ ++ ret = gpio_request(chost->sel_gpio, "CBUS sel"); ++ if (ret < 0) ++ goto exit3; ++ ++ gpio_direction_output(chost->clk_gpio, 0); ++ gpio_direction_input(chost->dat_gpio); ++ gpio_direction_output(chost->sel_gpio, 1); ++ ++ gpio_set_value(chost->clk_gpio, 1); ++ gpio_set_value(chost->clk_gpio, 0); ++ ++ platform_set_drvdata(pdev, chost); ++ ++ return 0; ++exit3: ++ gpio_free(chost->dat_gpio); ++exit2: ++ gpio_free(chost->clk_gpio); ++exit1: ++ kfree(chost); ++ ++ return ret; ++} ++ ++static void __exit cbus_bus_remove(struct platform_device *pdev) ++{ ++ struct cbus_host *chost = platform_get_drvdata(pdev); ++ ++ gpio_free(chost->sel_gpio); ++ gpio_free(chost->dat_gpio); ++ gpio_free(chost->clk_gpio); ++ ++ kfree(chost); ++} ++ ++static struct platform_driver cbus_driver = { ++ .remove = __exit_p(cbus_bus_remove), ++ .driver = { ++ .name = "cbus", ++ }, ++}; ++ ++static int __init cbus_bus_init(void) ++{ ++ return platform_driver_probe(&cbus_driver, cbus_bus_probe); ++} ++subsys_initcall(cbus_bus_init); ++ ++static void __exit cbus_bus_exit(void) ++{ ++ platform_driver_unregister(&cbus_driver); ++} ++module_exit(cbus_bus_exit); ++ ++MODULE_DESCRIPTION("CBUS serial protocol"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Juha Yrjölä"); ++MODULE_AUTHOR("David Weinehall"); ++MODULE_AUTHOR("Mikko Ylinen"); ++MODULE_AUTHOR("Felipe Balbi "); ++ +--- /dev/null ++++ b/drivers/cbus/cbus.h +@@ -0,0 +1,30 @@ ++/* ++ * drivers/cbus/cbus.h ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Juha Yrjölä and ++ * David Weinehall ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __DRIVERS_CBUS_CBUS_H ++#define __DRIVERS_CBUS_CBUS_H ++ ++extern int cbus_read_reg(struct device *, unsigned dev, unsigned reg); ++extern int cbus_write_reg(struct device *, unsigned dev, unsigned reg, ++ unsigned val); ++ ++#endif /* __DRIVERS_CBUS_CBUS_H */ +--- /dev/null ++++ b/drivers/cbus/Kconfig +@@ -0,0 +1,86 @@ ++# ++# CBUS device configuration ++# ++ ++menu "CBUS support" ++ ++config CBUS ++ bool "CBUS support on OMAP" ++ ---help--- ++ CBUS is a proprietary serial protocol by Nokia. It is mainly ++ used for accessing Energy Management auxiliary chips. ++ ++ If you want CBUS support, you should say Y here. ++ ++config CBUS_TAHVO ++ depends on CBUS ++ bool "Support for Tahvo" ++ ---help--- ++ Tahvo is a mixed signal ASIC with some system features ++ ++ If you want Tahvo support, you should say Y here. ++ ++if CBUS_TAHVO ++ ++config CBUS_TAHVO_USB ++ depends on USB ++ depends on ARCH_OMAP ++ select USB_OTG_UTILS ++ tristate "Support for Tahvo USB transceiver" ++ ---help--- ++ If you want Tahvo support for USB transceiver, say Y or M here. ++ ++config CBUS_TAHVO_USB_HOST_BY_DEFAULT ++ depends on CBUS_TAHVO_USB && USB_OTG ++ boolean "Device in USB host mode by default" ++ ---help--- ++ Say Y here, if you want the device to enter USB host mode ++ by default on bootup. ++ ++endif # CBUS_TAHVO ++ ++config CBUS_RETU ++ depends on CBUS ++ bool "Support for Retu" ++ ---help--- ++ Retu is a mixed signal ASIC with some system features ++ ++ If you want Retu support, you should say Y here. ++ ++if CBUS_RETU ++ ++config CBUS_RETU_POWERBUTTON ++ depends on INPUT ++ bool "Support for Retu power button" ++ ---help--- ++ The power button on Nokia 770 is connected to the Retu ASIC. ++ ++ If you want support for the Retu power button, you should say Y here. ++ ++config CBUS_RETU_RTC ++ depends on RTC_CLASS ++ depends on ARCH_OMAP ++ tristate "Support for Retu pseudo-RTC" ++ ---help--- ++ Say Y here if you want support for the device that alleges to be an ++ RTC in Retu. This will expose a sysfs interface for it. ++ ++config CBUS_RETU_WDT ++ depends on SYSFS && WATCHDOG ++ depends on ARCH_OMAP ++ tristate "Support for Retu watchdog timer" ++ ---help--- ++ Say Y here if you want support for the watchdog in Retu. This will ++ expose a sysfs interface to grok it. ++ ++config CBUS_RETU_HEADSET ++ depends on SYSFS ++ tristate "Support for headset detection with Retu/Vilma" ++ ---help--- ++ Say Y here if you want support detecting a headset that's connected ++ to Retu/Vilma. Detection state and events are exposed through ++ sysfs. ++ ++endif # CBUS_RETU ++ ++endmenu +--- /dev/null ++++ b/drivers/cbus/Makefile +@@ -0,0 +1,13 @@ ++# ++# Makefile for CBUS. ++# ++ ++obj-$(CONFIG_CBUS) += cbus.o ++obj-$(CONFIG_CBUS_TAHVO) += tahvo.o ++obj-$(CONFIG_CBUS_RETU) += retu.o ++obj-$(CONFIG_CBUS_TAHVO_USB) += tahvo-usb.o ++ ++obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += retu-pwrbutton.o ++obj-$(CONFIG_CBUS_RETU_RTC) += retu-rtc.o ++obj-$(CONFIG_CBUS_RETU_WDT) += retu-wdt.o ++obj-$(CONFIG_CBUS_RETU_HEADSET) += retu-headset.o +--- /dev/null ++++ b/drivers/cbus/retu.c +@@ -0,0 +1,549 @@ ++/** ++ * drivers/cbus/retu.c ++ * ++ * Support functions for Retu ASIC ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Juha Yrjölä , ++ * David Weinehall , and ++ * Mikko Ylinen ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include "cbus.h" ++#include "retu.h" ++ ++struct retu { ++ /* Device lock */ ++ struct mutex mutex; ++ struct device *dev; ++ ++ int devid; ++ ++ int irq_base; ++ int irq_end; ++ ++ int irq; ++ ++ int ack; ++ bool ack_pending; ++ ++ int mask; ++ bool mask_pending; ++ ++ bool is_vilma; ++}; ++ ++static struct retu *the_retu; ++ ++/** ++ * __retu_read_reg - Read a value from a register in Retu ++ * @retu: pointer to retu structure ++ * @reg: the register address to read from ++ */ ++static int __retu_read_reg(struct retu *retu, unsigned reg) ++{ ++ return cbus_read_reg(retu->dev, retu->devid, reg); ++} ++ ++/** ++ * __retu_write_reg - Writes a value to a register in Retu ++ * @retu: pointer to retu structure ++ * @reg: the register address to write to ++ * @val: the value to write to the register ++ */ ++static void __retu_write_reg(struct retu *retu, unsigned reg, u16 val) ++{ ++ cbus_write_reg(retu->dev, retu->devid, reg, val); ++} ++ ++/** ++ * retu_read_reg - Read a value from a register in Retu ++ * @child: device pointer for the calling child ++ * @reg: the register to read from ++ * ++ * This function returns the contents of the specified register ++ */ ++int retu_read_reg(struct device *child, unsigned reg) ++{ ++ struct retu *retu = dev_get_drvdata(child->parent); ++ ++ return __retu_read_reg(retu, reg); ++} ++EXPORT_SYMBOL_GPL(retu_read_reg); ++ ++/** ++ * retu_write_reg - Write a value to a register in Retu ++ * @child: the pointer to our calling child ++ * @reg: the register to write to ++ * @val: the value to write to the register ++ * ++ * This function writes a value to the specified register ++ */ ++void retu_write_reg(struct device *child, unsigned reg, u16 val) ++{ ++ struct retu *retu = dev_get_drvdata(child->parent); ++ ++ mutex_lock(&retu->mutex); ++ __retu_write_reg(retu, reg, val); ++ mutex_unlock(&retu->mutex); ++} ++EXPORT_SYMBOL_GPL(retu_write_reg); ++ ++/** ++ * retu_set_clear_reg_bits - helper function to read/set/clear bits ++ * @child: device pointer to calling child ++ * @reg: the register address ++ * @set: mask for setting bits ++ * @clear: mask for clearing bits ++ */ ++void retu_set_clear_reg_bits(struct device *child, unsigned reg, u16 set, ++ u16 clear) ++{ ++ struct retu *retu = dev_get_drvdata(child->parent); ++ u16 w; ++ ++ mutex_lock(&retu->mutex); ++ w = __retu_read_reg(retu, reg); ++ w &= ~clear; ++ w |= set; ++ __retu_write_reg(retu, reg, w); ++ mutex_unlock(&retu->mutex); ++} ++EXPORT_SYMBOL_GPL(retu_set_clear_reg_bits); ++ ++#define ADC_MAX_CHAN_NUMBER 13 ++ ++/** ++ * retu_read_adc - Reads AD conversion result ++ * @child: device pointer to calling child ++ * @channel: the ADC channel to read from ++ */ ++int retu_read_adc(struct device *child, int channel) ++{ ++ struct retu *retu = dev_get_drvdata(child->parent); ++ int res; ++ ++ if (!retu) ++ return -ENODEV; ++ ++ if (channel < 0 || channel > ADC_MAX_CHAN_NUMBER) ++ return -EINVAL; ++ ++ mutex_lock(&retu->mutex); ++ ++ if ((channel == 8) && retu->is_vilma) { ++ int scr = __retu_read_reg(retu, RETU_REG_ADCSCR); ++ int ch = (__retu_read_reg(retu, RETU_REG_ADCR) >> 10) & 0xf; ++ if (((scr & 0xff) != 0) && (ch != 8)) ++ __retu_write_reg(retu, RETU_REG_ADCSCR, (scr & ~0xff)); ++ } ++ ++ /* Select the channel and read result */ ++ __retu_write_reg(retu, RETU_REG_ADCR, channel << 10); ++ res = __retu_read_reg(retu, RETU_REG_ADCR) & 0x3ff; ++ ++ if (retu->is_vilma) ++ __retu_write_reg(retu, RETU_REG_ADCR, (1 << 13)); ++ ++ /* Unlock retu */ ++ mutex_unlock(&retu->mutex); ++ ++ return res; ++} ++EXPORT_SYMBOL_GPL(retu_read_adc); ++ ++static irqreturn_t retu_irq_handler(int irq, void *_retu) ++{ ++ struct retu *retu = _retu; ++ ++ u16 idr; ++ u16 imr; ++ ++ mutex_lock(&retu->mutex); ++ idr = __retu_read_reg(retu, RETU_REG_IDR); ++ imr = __retu_read_reg(retu, RETU_REG_IMR); ++ mutex_unlock(&retu->mutex); ++ ++ idr &= ~imr; ++ if (!idr) { ++ dev_vdbg(retu->dev, "No IRQ, spurious?\n"); ++ return IRQ_NONE; ++ } ++ ++ while (idr) { ++ unsigned long pending = __ffs(idr); ++ unsigned int irq; ++ ++ idr &= ~BIT(pending); ++ irq = pending + retu->irq_base; ++ handle_nested_irq(irq); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++/* -------------------------------------------------------------------------- */ ++ ++static void retu_irq_mask(struct irq_data *data) ++{ ++ struct retu *retu = irq_data_get_irq_chip_data(data); ++ int irq = data->irq; ++ ++ retu->mask |= (1 << (irq - retu->irq_base)); ++ retu->mask_pending = true; ++} ++ ++static void retu_irq_unmask(struct irq_data *data) ++{ ++ struct retu *retu = irq_data_get_irq_chip_data(data); ++ int irq = data->irq; ++ ++ retu->mask &= ~(1 << (irq - retu->irq_base)); ++ retu->mask_pending = true; ++ ++} ++ ++static void retu_irq_ack(struct irq_data *data) ++{ ++ struct retu *retu = irq_data_get_irq_chip_data(data); ++ int irq = data->irq; ++ ++ retu->ack |= (1 << (irq - retu->irq_base)); ++ retu->ack_pending = true; ++} ++ ++static void retu_bus_lock(struct irq_data *data) ++{ ++ struct retu *retu = irq_data_get_irq_chip_data(data); ++ ++ mutex_lock(&retu->mutex); ++} ++ ++static void retu_bus_sync_unlock(struct irq_data *data) ++{ ++ struct retu *retu = irq_data_get_irq_chip_data(data); ++ ++ if (retu->mask_pending) { ++ __retu_write_reg(retu, RETU_REG_IMR, retu->mask); ++ retu->mask_pending = false; ++ } ++ ++ if (retu->ack_pending) { ++ __retu_write_reg(retu, RETU_REG_IDR, retu->ack); ++ retu->ack_pending = false; ++ } ++ ++ mutex_unlock(&retu->mutex); ++} ++ ++static struct irq_chip retu_irq_chip = { ++ .name = "retu", ++ .irq_bus_lock = retu_bus_lock, ++ .irq_bus_sync_unlock = retu_bus_sync_unlock, ++ .irq_mask = retu_irq_mask, ++ .irq_unmask = retu_irq_unmask, ++ .irq_ack = retu_irq_ack, ++}; ++ ++static inline void retu_irq_setup(int irq) ++{ ++#ifdef CONFIG_ARM ++ set_irq_flags(irq, IRQF_VALID); ++#else ++ irq_set_noprobe(irq); ++#endif ++} ++ ++static void retu_irq_init(struct retu *retu) ++{ ++ int base = retu->irq_base; ++ int end = retu->irq_end; ++ int irq; ++ ++ for (irq = base; irq < end; irq++) { ++ irq_set_chip_data(irq, retu); ++ irq_set_chip_and_handler(irq, &retu_irq_chip, ++ handle_simple_irq); ++ irq_set_nested_thread(irq, 1); ++ retu_irq_setup(irq); ++ } ++} ++ ++static void retu_irq_exit(struct retu *retu) ++{ ++ int base = retu->irq_base; ++ int end = retu->irq_end; ++ int irq; ++ ++ for (irq = base; irq < end; irq++) { ++#ifdef CONFIG_ARM ++ set_irq_flags(irq, 0); ++#endif ++ irq_set_chip_and_handler(irq, NULL, NULL); ++ irq_set_chip_data(irq, NULL); ++ } ++} ++ ++/* -------------------------------------------------------------------------- */ ++ ++/** ++ * retu_power_off - Shut down power to system ++ * ++ * This function puts the system in power off state ++ */ ++static void retu_power_off(void) ++{ ++ struct retu *retu = the_retu; ++ unsigned reg; ++ ++ reg = __retu_read_reg(retu, RETU_REG_CC1); ++ ++ /* Ignore power button state */ ++ __retu_write_reg(retu, RETU_REG_CC1, reg | 2); ++ /* Expire watchdog immediately */ ++ __retu_write_reg(retu, RETU_REG_WATCHDOG, 0); ++ /* Wait for poweroff*/ ++ for (;;); ++} ++ ++static struct resource generic_resources[] = { ++ { ++ .start = -EINVAL, /* fixed later */ ++ .flags = IORESOURCE_IRQ, ++ }, ++ { ++ .start = -EINVAL, /* fixed later */ ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++/** ++ * retu_allocate_child - Allocates one Retu child ++ * @name: name of new child ++ * @parent: parent device for this child ++ */ ++static struct device *retu_allocate_child(char *name, struct device *parent, ++ int irq_base, int irq1, int irq2, int num) ++{ ++ struct platform_device *pdev; ++ int status; ++ ++ pdev = platform_device_alloc(name, -1); ++ if (!pdev) { ++ dev_dbg(parent, "can't allocate %s\n", name); ++ goto err; ++ } ++ ++ pdev->dev.parent = parent; ++ ++ if (num) { ++ generic_resources[0].start = irq_base + irq1; ++ generic_resources[1].start = irq_base + irq2; ++ ++ status = platform_device_add_resources(pdev, ++ generic_resources, num); ++ if (status < 0) { ++ dev_dbg(parent, "can't add resources to %s\n", name); ++ goto err; ++ } ++ } ++ ++ status = platform_device_add(pdev); ++ if (status < 0) { ++ dev_dbg(parent, "can't add %s\n", name); ++ goto err; ++ } ++ ++ return &pdev->dev; ++ ++err: ++ platform_device_put(pdev); ++ ++ return NULL; ++} ++ ++/** ++ * retu_allocate_children - Allocates Retu's children ++ */ ++static int retu_allocate_children(struct device *parent, int irq_base) ++{ ++ struct device *child; ++ ++ child = retu_allocate_child("retu-pwrbutton", parent, irq_base, ++ RETU_INT_PWR, -1, 1); ++ if (!child) ++ return -ENOMEM; ++ ++ child = retu_allocate_child("retu-headset", parent, irq_base, ++ RETU_INT_HOOK, -1, 1); ++ if (!child) ++ return -ENOMEM; ++ ++ child = retu_allocate_child("retu-rtc", parent, irq_base, ++ RETU_INT_RTCS, RETU_INT_RTCA, 2); ++ if (!child) ++ return -ENOMEM; ++ ++ child = retu_allocate_child("retu-wdt", parent, -1, -1, -1, 0); ++ if (!child) ++ return -ENOMEM; ++ ++ return 0; ++} ++ ++/** ++ * retu_probe - Probe for Retu ASIC ++ * @dev: the Retu device ++ * ++ * Probe for the Retu ASIC and allocate memory ++ * for its device-struct if found ++ */ ++static int __devinit retu_probe(struct platform_device *pdev) ++{ ++ struct retu *retu; ++ struct cbus_retu_platform_data *pdata = pdev->dev.platform_data; ++ ++ int ret = -ENOMEM; ++ int rev; ++ ++ retu = kzalloc(sizeof(*retu), GFP_KERNEL); ++ if (!retu) { ++ dev_err(&pdev->dev, "not enough memory\n"); ++ goto err0; ++ } ++ ++ platform_set_drvdata(pdev, retu); ++ ++ ret = irq_alloc_descs(-1, 0, MAX_RETU_IRQ_HANDLERS, 0); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "failed to allocate IRQ descs\n"); ++ goto err1; ++ } ++ ++ retu->irq = platform_get_irq(pdev, 0); ++ retu->irq_base = ret; ++ retu->irq_end = ret + MAX_RETU_IRQ_HANDLERS; ++ retu->devid = pdata->devid; ++ retu->dev = &pdev->dev; ++ the_retu = retu; ++ ++ mutex_init(&retu->mutex); ++ ++ retu_irq_init(retu); ++ ++ rev = __retu_read_reg(retu, RETU_REG_ASICR) & 0xff; ++ if (rev & (1 << 7)) ++ retu->is_vilma = true; ++ ++ dev_info(&pdev->dev, "%s v%d.%d found\n", ++ retu->is_vilma ? "Vilma" : "Retu", ++ (rev >> 4) & 0x07, rev & 0x0f); ++ ++ /* Mask all RETU interrupts */ ++ __retu_write_reg(retu, RETU_REG_IMR, 0xffff); ++ ++ ret = request_threaded_irq(retu->irq, NULL, retu_irq_handler, ++ IRQF_ONESHOT, "retu", retu); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "Unable to register IRQ handler\n"); ++ goto err2; ++ } ++ ++ irq_set_irq_wake(retu->irq, 1); ++ ++ /* Register power off function */ ++ pm_power_off = retu_power_off; ++ ++ ret = retu_allocate_children(&pdev->dev, retu->irq_base); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "Unable to allocate Retu children\n"); ++ goto err3; ++ } ++ ++ return 0; ++ ++err3: ++ pm_power_off = NULL; ++ free_irq(retu->irq, retu); ++ ++err2: ++ retu_irq_exit(retu); ++ irq_free_descs(retu->irq_base, MAX_RETU_IRQ_HANDLERS); ++ ++err1: ++ kfree(retu); ++ the_retu = NULL; ++ ++err0: ++ return ret; ++} ++ ++static int __devexit retu_remove(struct platform_device *pdev) ++{ ++ struct retu *retu = platform_get_drvdata(pdev); ++ ++ pm_power_off = NULL; ++ the_retu = NULL; ++ ++ free_irq(retu->irq, retu); ++ retu_irq_exit(retu); ++ irq_free_descs(retu->irq_base, MAX_RETU_IRQ_HANDLERS); ++ kfree(retu); ++ ++ return 0; ++} ++ ++static struct platform_driver retu_driver = { ++ .probe = retu_probe, ++ .remove = __devexit_p(retu_remove), ++ .driver = { ++ .name = "retu", ++ }, ++}; ++ ++static int __init retu_init(void) ++{ ++ return platform_driver_register(&retu_driver); ++} ++subsys_initcall(retu_init); ++ ++static void __exit retu_exit(void) ++{ ++ platform_driver_unregister(&retu_driver); ++} ++module_exit(retu_exit); ++ ++MODULE_DESCRIPTION("Retu ASIC control"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Juha Yrjölä"); ++MODULE_AUTHOR("David Weinehall"); ++MODULE_AUTHOR("Mikko Ylinen"); +--- /dev/null ++++ b/drivers/cbus/retu.h +@@ -0,0 +1,85 @@ ++/** ++ * drivers/cbus/retu.h ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Juha Yrjölä and ++ * David Weinehall ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __DRIVERS_CBUS_RETU_H ++#define __DRIVERS_CBUS_RETU_H ++ ++#include ++ ++/* Registers */ ++#define RETU_REG_ASICR 0x00 /* ASIC ID & revision */ ++#define RETU_REG_IDR 0x01 /* Interrupt ID */ ++#define RETU_REG_IMR 0x02 /* Interrupt mask */ ++#define RETU_REG_RTCDSR 0x03 /* RTC seconds register */ ++#define RETU_REG_RTCHMR 0x04 /* RTC hours and minutes register */ ++#define RETU_REG_RTCHMAR 0x05 /* RTC hours and minutes alarm and time set register */ ++#define RETU_REG_RTCCALR 0x06 /* RTC calibration register */ ++#define RETU_REG_ADCR 0x08 /* ADC result */ ++#define RETU_REG_ADCSCR 0x09 /* ADC sample ctrl */ ++#define RETU_REG_CC1 0x0d /* Common control register 1 */ ++#define RETU_REG_CC2 0x0e /* Common control register 2 */ ++#define RETU_REG_CTRL_CLR 0x0f /* Regulator clear register */ ++#define RETU_REG_CTRL_SET 0x10 /* Regulator set register */ ++#define RETU_REG_STATUS 0x16 /* Status register */ ++#define RETU_REG_STATUS_BATAVAIL 0x0100 /* Battery available */ ++#define RETU_REG_STATUS_CHGPLUG 0x1000 /* Charger is plugged in */ ++#define RETU_REG_WATCHDOG 0x17 /* Watchdog register */ ++#define RETU_REG_AUDTXR 0x18 /* Audio Codec Tx register */ ++#define RETU_REG_MAX 0x1f ++ ++/* Interrupt sources */ ++#define RETU_INT_PWR 0 ++#define RETU_INT_CHAR 1 ++#define RETU_INT_RTCS 2 ++#define RETU_INT_RTCM 3 ++#define RETU_INT_RTCD 4 ++#define RETU_INT_RTCA 5 ++#define RETU_INT_HOOK 6 ++#define RETU_INT_HEAD 7 ++#define RETU_INT_ADCS 8 ++ ++#define MAX_RETU_IRQ_HANDLERS 16 ++ ++/* ADC channels */ ++#define RETU_ADC_GND 0x00 /* Ground */ ++#define RETU_ADC_BSI 0x01 /* Battery Size Indicator */ ++#define RETU_ADC_BATTEMP 0x02 /* Battery temperature */ ++#define RETU_ADC_CHGVOLT 0x03 /* Charger voltage */ ++#define RETU_ADC_HEADSET 0x04 /* Headset detection */ ++#define RETU_ADC_HOOKDET 0x05 /* Hook detection */ ++#define RETU_ADC_RFGP 0x06 /* RF GP */ ++#define RETU_ADC_WBTX 0x07 /* Wideband Tx detection */ ++#define RETU_ADC_BATTVOLT 0x08 /* Battery voltage measurement */ ++#define RETU_ADC_GND2 0x09 /* Ground */ ++#define RETU_ADC_LIGHTSENS 0x0A /* Light sensor */ ++#define RETU_ADC_LIGHTTEMP 0x0B /* Light sensor temperature */ ++#define RETU_ADC_BKUPVOLT 0x0C /* Backup battery voltage */ ++#define RETU_ADC_TEMP 0x0D /* RETU temperature */ ++ ++ ++int retu_read_reg(struct device *child, unsigned reg); ++void retu_write_reg(struct device *child, unsigned reg, u16 val); ++void retu_set_clear_reg_bits(struct device *child, unsigned reg, u16 set, ++ u16 clear); ++int retu_read_adc(struct device *child, int channel); ++ ++#endif /* __DRIVERS_CBUS_RETU_H */ +--- /dev/null ++++ b/drivers/cbus/retu-headset.c +@@ -0,0 +1,359 @@ ++/** ++ * Retu/Vilma headset detection ++ * ++ * Copyright (C) 2006 Nokia Corporation ++ * ++ * Written by Juha Yrjölä ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "retu.h" ++ ++#define RETU_ADC_CHANNEL_HOOKDET 0x05 ++ ++#define RETU_HEADSET_KEY KEY_PHONE ++ ++struct retu_headset { ++ spinlock_t lock; ++ struct mutex mutex; ++ struct device *dev; ++ struct input_dev *idev; ++ unsigned bias_enabled; ++ unsigned detection_enabled; ++ unsigned pressed; ++ struct timer_list enable_timer; ++ struct timer_list detect_timer; ++ int irq; ++}; ++ ++static void retu_headset_set_bias(struct retu_headset *hs, int enable) ++{ ++ if (enable) { ++ retu_set_clear_reg_bits(hs->dev, RETU_REG_AUDTXR, ++ (1 << 0) | (1 << 1), 0); ++ msleep(2); ++ retu_set_clear_reg_bits(hs->dev, RETU_REG_AUDTXR, ++ 1 << 3, 0); ++ } else { ++ retu_set_clear_reg_bits(hs->dev, RETU_REG_AUDTXR, 0, ++ (1 << 0) | (1 << 1) | (1 << 3)); ++ } ++} ++ ++static void retu_headset_enable(struct retu_headset *hs) ++{ ++ mutex_lock(&hs->mutex); ++ if (!hs->bias_enabled) { ++ hs->bias_enabled = 1; ++ retu_headset_set_bias(hs, 1); ++ } ++ mutex_unlock(&hs->mutex); ++} ++ ++static void retu_headset_disable(struct retu_headset *hs) ++{ ++ mutex_lock(&hs->mutex); ++ if (hs->bias_enabled) { ++ hs->bias_enabled = 0; ++ retu_headset_set_bias(hs, 0); ++ } ++ mutex_unlock(&hs->mutex); ++} ++ ++static void retu_headset_det_enable(struct retu_headset *hs) ++{ ++ mutex_lock(&hs->mutex); ++ if (!hs->detection_enabled) { ++ hs->detection_enabled = 1; ++ retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1, ++ (1 << 10) | (1 << 8), 0); ++ } ++ mutex_unlock(&hs->mutex); ++} ++ ++static void retu_headset_det_disable(struct retu_headset *hs) ++{ ++ unsigned long flags; ++ ++ mutex_lock(&hs->mutex); ++ if (hs->detection_enabled) { ++ hs->detection_enabled = 0; ++ del_timer_sync(&hs->enable_timer); ++ del_timer_sync(&hs->detect_timer); ++ spin_lock_irqsave(&hs->lock, flags); ++ if (hs->pressed) ++ input_report_key(hs->idev, RETU_HEADSET_KEY, 0); ++ spin_unlock_irqrestore(&hs->lock, flags); ++ retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1, 0, ++ (1 << 10) | (1 << 8)); ++ } ++ mutex_unlock(&hs->mutex); ++} ++ ++static ssize_t retu_headset_hookdet_show(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ int val; ++ ++ val = retu_read_adc(dev, RETU_ADC_CHANNEL_HOOKDET); ++ return sprintf(buf, "%d\n", val); ++} ++ ++static DEVICE_ATTR(hookdet, S_IRUGO, retu_headset_hookdet_show, NULL); ++ ++static ssize_t retu_headset_enable_show(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct retu_headset *hs = dev_get_drvdata(dev); ++ ++ return sprintf(buf, "%u\n", hs->bias_enabled); ++} ++ ++static ssize_t retu_headset_enable_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct retu_headset *hs = dev_get_drvdata(dev); ++ int enable; ++ ++ if (sscanf(buf, "%u", &enable) != 1) ++ return -EINVAL; ++ if (enable) ++ retu_headset_enable(hs); ++ else ++ retu_headset_disable(hs); ++ return count; ++} ++ ++static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR | S_IWGRP, ++ retu_headset_enable_show, retu_headset_enable_store); ++ ++static ssize_t retu_headset_enable_det_show(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct retu_headset *hs = dev_get_drvdata(dev); ++ ++ return sprintf(buf, "%u\n", hs->detection_enabled); ++} ++ ++static ssize_t retu_headset_enable_det_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct retu_headset *hs = dev_get_drvdata(dev); ++ int enable; ++ ++ if (sscanf(buf, "%u", &enable) != 1) ++ return -EINVAL; ++ if (enable) ++ retu_headset_det_enable(hs); ++ else ++ retu_headset_det_disable(hs); ++ return count; ++} ++ ++static DEVICE_ATTR(enable_det, S_IRUGO | S_IWUSR | S_IWGRP, ++ retu_headset_enable_det_show, ++ retu_headset_enable_det_store); ++ ++static irqreturn_t retu_headset_hook_interrupt(int irq, void *_hs) ++{ ++ struct retu_headset *hs = _hs; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&hs->lock, flags); ++ if (!hs->pressed) { ++ /* Headset button was just pressed down. */ ++ hs->pressed = 1; ++ input_report_key(hs->idev, RETU_HEADSET_KEY, 1); ++ } ++ spin_unlock_irqrestore(&hs->lock, flags); ++ retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1, 0, ++ (1 << 10) | (1 << 8)); ++ mod_timer(&hs->enable_timer, jiffies + msecs_to_jiffies(50)); ++ ++ return IRQ_HANDLED; ++} ++ ++static void retu_headset_enable_timer(unsigned long arg) ++{ ++ struct retu_headset *hs = (struct retu_headset *) arg; ++ ++ retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1, ++ (1 << 10) | (1 << 8), 0); ++ mod_timer(&hs->detect_timer, jiffies + msecs_to_jiffies(350)); ++} ++ ++static void retu_headset_detect_timer(unsigned long arg) ++{ ++ struct retu_headset *hs = (struct retu_headset *) arg; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&hs->lock, flags); ++ if (hs->pressed) { ++ hs->pressed = 0; ++ input_report_key(hs->idev, RETU_HEADSET_KEY, 0); ++ } ++ spin_unlock_irqrestore(&hs->lock, flags); ++} ++ ++static int __init retu_headset_probe(struct platform_device *pdev) ++{ ++ struct retu_headset *hs; ++ int irq; ++ int r; ++ ++ hs = kzalloc(sizeof(*hs), GFP_KERNEL); ++ if (hs == NULL) ++ return -ENOMEM; ++ ++ hs->dev = &pdev->dev; ++ ++ hs->idev = input_allocate_device(); ++ if (hs->idev == NULL) { ++ r = -ENOMEM; ++ goto err1; ++ } ++ hs->idev->name = "retu-headset"; ++ hs->idev->dev.parent = &pdev->dev; ++ set_bit(EV_KEY, hs->idev->evbit); ++ set_bit(RETU_HEADSET_KEY, hs->idev->keybit); ++ r = input_register_device(hs->idev); ++ if (r < 0) ++ goto err2; ++ ++ r = device_create_file(&pdev->dev, &dev_attr_hookdet); ++ if (r < 0) ++ goto err3; ++ r = device_create_file(&pdev->dev, &dev_attr_enable); ++ if (r < 0) ++ goto err4; ++ r = device_create_file(&pdev->dev, &dev_attr_enable_det); ++ if (r < 0) ++ goto err5; ++ platform_set_drvdata(pdev, hs); ++ ++ spin_lock_init(&hs->lock); ++ mutex_init(&hs->mutex); ++ setup_timer(&hs->enable_timer, retu_headset_enable_timer, ++ (unsigned long) hs); ++ setup_timer(&hs->detect_timer, retu_headset_detect_timer, ++ (unsigned long) hs); ++ ++ irq = platform_get_irq(pdev, 0); ++ hs->irq = irq; ++ ++ r = request_threaded_irq(irq, NULL, retu_headset_hook_interrupt, 0, ++ "hookdet", hs); ++ if (r != 0) { ++ dev_err(&pdev->dev, "hookdet IRQ not available\n"); ++ goto err6; ++ } ++ ++ return 0; ++err6: ++ device_remove_file(&pdev->dev, &dev_attr_enable_det); ++err5: ++ device_remove_file(&pdev->dev, &dev_attr_enable); ++err4: ++ device_remove_file(&pdev->dev, &dev_attr_hookdet); ++err3: ++ input_unregister_device(hs->idev); ++err2: ++ input_free_device(hs->idev); ++err1: ++ kfree(hs); ++ return r; ++} ++ ++static int retu_headset_remove(struct platform_device *pdev) ++{ ++ struct retu_headset *hs = platform_get_drvdata(pdev); ++ ++ device_remove_file(&pdev->dev, &dev_attr_hookdet); ++ device_remove_file(&pdev->dev, &dev_attr_enable); ++ device_remove_file(&pdev->dev, &dev_attr_enable_det); ++ retu_headset_disable(hs); ++ retu_headset_det_disable(hs); ++ free_irq(hs->irq, hs); ++ input_unregister_device(hs->idev); ++ input_free_device(hs->idev); ++ ++ return 0; ++} ++ ++static int retu_headset_suspend(struct platform_device *pdev, ++ pm_message_t mesg) ++{ ++ struct retu_headset *hs = platform_get_drvdata(pdev); ++ ++ mutex_lock(&hs->mutex); ++ if (hs->bias_enabled) ++ retu_headset_set_bias(hs, 0); ++ mutex_unlock(&hs->mutex); ++ ++ return 0; ++} ++ ++static int retu_headset_resume(struct platform_device *pdev) ++{ ++ struct retu_headset *hs = platform_get_drvdata(pdev); ++ ++ mutex_lock(&hs->mutex); ++ if (hs->bias_enabled) ++ retu_headset_set_bias(hs, 1); ++ mutex_unlock(&hs->mutex); ++ ++ return 0; ++} ++ ++static struct platform_driver retu_headset_driver = { ++ .remove = retu_headset_remove, ++ .suspend = retu_headset_suspend, ++ .resume = retu_headset_resume, ++ .driver = { ++ .name = "retu-headset", ++ }, ++}; ++ ++static int __init retu_headset_init(void) ++{ ++ return platform_driver_probe(&retu_headset_driver, retu_headset_probe); ++} ++ ++static void __exit retu_headset_exit(void) ++{ ++ platform_driver_unregister(&retu_headset_driver); ++} ++ ++module_init(retu_headset_init); ++module_exit(retu_headset_exit); ++ ++MODULE_DESCRIPTION("Retu/Vilma headset detection"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Juha Yrjölä"); +--- /dev/null ++++ b/drivers/cbus/retu-pwrbutton.c +@@ -0,0 +1,165 @@ ++/** ++ * drivers/cbus/retu-pwrbutton.c ++ * ++ * Driver for sending retu power button event to input-layer ++ * ++ * Copyright (C) 2004-2010 Nokia Corporation ++ * ++ * Written by ++ * Ari Saastamoinen ++ * Juha Yrjola ++ * ++ * Contact: Felipe Balbi ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "retu.h" ++ ++#define RETU_STATUS_PWRONX (1 << 5) ++ ++#define PWRBTN_DELAY 20 ++#define PWRBTN_UP 0 ++#define PWRBTN_PRESSED 1 ++ ++struct retu_pwrbutton { ++ struct input_dev *idev; ++ struct device *dev; ++ ++ int state; ++ int irq; ++}; ++ ++static irqreturn_t retubutton_irq(int irq, void *_pwr) ++{ ++ struct retu_pwrbutton *pwr = _pwr; ++ int state; ++ ++ if (retu_read_reg(pwr->dev, RETU_REG_STATUS) & RETU_STATUS_PWRONX) ++ state = PWRBTN_UP; ++ else ++ state = PWRBTN_PRESSED; ++ ++ if (pwr->state != state) { ++ input_report_key(pwr->idev, KEY_POWER, state); ++ input_sync(pwr->idev); ++ pwr->state = state; ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static int __init retubutton_probe(struct platform_device *pdev) ++{ ++ struct retu_pwrbutton *pwr; ++ int ret = 0; ++ ++ pwr = kzalloc(sizeof(*pwr), GFP_KERNEL); ++ if (!pwr) { ++ dev_err(&pdev->dev, "not enough memory\n"); ++ ret = -ENOMEM; ++ goto err0; ++ } ++ ++ pwr->dev = &pdev->dev; ++ pwr->irq = platform_get_irq(pdev, 0); ++ platform_set_drvdata(pdev, pwr); ++ ++ ret = request_threaded_irq(pwr->irq, NULL, retubutton_irq, 0, ++ "retu-pwrbutton", pwr); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "Cannot allocate irq\n"); ++ goto err1; ++ } ++ ++ pwr->idev = input_allocate_device(); ++ if (!pwr->idev) { ++ dev_err(&pdev->dev, "can't allocate input device\n"); ++ ret = -ENOMEM; ++ goto err2; ++ } ++ ++ pwr->idev->evbit[0] = BIT_MASK(EV_KEY); ++ pwr->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER); ++ pwr->idev->name = "retu-pwrbutton"; ++ ++ ret = input_register_device(pwr->idev); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "failed to register input device\n"); ++ goto err3; ++ } ++ ++ return 0; ++ ++err3: ++ input_free_device(pwr->idev); ++ ++err2: ++ free_irq(pwr->irq, pwr); ++ ++err1: ++ kfree(pwr); ++ ++err0: ++ return ret; ++} ++ ++static int __exit retubutton_remove(struct platform_device *pdev) ++{ ++ struct retu_pwrbutton *pwr = platform_get_drvdata(pdev); ++ ++ free_irq(pwr->irq, pwr); ++ input_unregister_device(pwr->idev); ++ input_free_device(pwr->idev); ++ kfree(pwr); ++ ++ return 0; ++} ++ ++static struct platform_driver retu_pwrbutton_driver = { ++ .remove = __exit_p(retubutton_remove), ++ .driver = { ++ .name = "retu-pwrbutton", ++ }, ++}; ++ ++static int __init retubutton_init(void) ++{ ++ return platform_driver_probe(&retu_pwrbutton_driver, retubutton_probe); ++} ++module_init(retubutton_init); ++ ++static void __exit retubutton_exit(void) ++{ ++ platform_driver_unregister(&retu_pwrbutton_driver); ++} ++module_exit(retubutton_exit); ++ ++MODULE_DESCRIPTION("Retu Power Button"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Ari Saastamoinen"); ++MODULE_AUTHOR("Felipe Balbi "); ++ +--- /dev/null ++++ b/drivers/cbus/retu-rtc.c +@@ -0,0 +1,287 @@ ++/** ++ * drivers/cbus/retu-rtc.c ++ * ++ * Support for Retu RTC ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Paul Mundt and ++ * Igor Stoppa ++ * ++ * The Retu RTC is essentially a partial read-only RTC that gives us Retu's ++ * idea of what time actually is. It's left as a userspace excercise to map ++ * this back to time in the real world and ensure that calibration settings ++ * are sane to compensate for any horrible drift (on account of not being able ++ * to set the clock to anything). ++ * ++ * Days are semi-writeable. Namely, Retu will only track 255 days for us ++ * consecutively, after which the counter is explicitly stuck at 255 until ++ * someone comes along and clears it with a write. In the event that no one ++ * comes along and clears it, we no longer have any idea what day it is. ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "cbus.h" ++#include "retu.h" ++ ++struct retu_rtc { ++ /* device lock */ ++ struct mutex mutex; ++ struct device *dev; ++ struct rtc_device *rtc; ++ ++ u16 alarm_expired; ++ int irq_rtcs; ++ int irq_rtca; ++}; ++ ++static void retu_rtc_do_reset(struct retu_rtc *rtc) ++{ ++ u16 ccr1; ++ ++ ccr1 = retu_read_reg(rtc->dev, RETU_REG_CC1); ++ /* RTC in reset */ ++ retu_write_reg(rtc->dev, RETU_REG_CC1, ccr1 | 0x0001); ++ /* RTC in normal operating mode */ ++ retu_write_reg(rtc->dev, RETU_REG_CC1, ccr1 & ~0x0001); ++ ++ /* Disable alarm and RTC WD */ ++ retu_write_reg(rtc->dev, RETU_REG_RTCHMAR, 0x7f3f); ++ /* Set Calibration register to default value */ ++ retu_write_reg(rtc->dev, RETU_REG_RTCCALR, 0x00c0); ++ ++ rtc->alarm_expired = 0; ++} ++ ++static irqreturn_t retu_rtc_interrupt(int irq, void *_rtc) ++{ ++ struct retu_rtc *rtc = _rtc; ++ ++ mutex_lock(&rtc->mutex); ++ rtc->alarm_expired = 1; ++ retu_write_reg(rtc->dev, RETU_REG_RTCHMAR, (24 << 8) | 60); ++ mutex_unlock(&rtc->mutex); ++ ++ return IRQ_HANDLED; ++} ++ ++static int retu_rtc_init_irq(struct retu_rtc *rtc) ++{ ++ int irq; ++ int ret; ++ ++ irq = platform_get_irq(to_platform_device(rtc->dev), 0); ++ rtc->irq_rtcs = irq; ++ ++ irq = platform_get_irq(to_platform_device(rtc->dev), 1); ++ rtc->irq_rtca = irq; ++ ++ ret = request_threaded_irq(rtc->irq_rtcs, NULL, retu_rtc_interrupt, ++ 0, "RTCS", rtc); ++ if (ret != 0) ++ return ret; ++ ++ ret = request_threaded_irq(rtc->irq_rtca, NULL, retu_rtc_interrupt, ++ 0, "RTCA", rtc); ++ if (ret != 0) { ++ free_irq(rtc->irq_rtcs, rtc); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int retu_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) ++{ ++ struct retu_rtc *rtc = dev_get_drvdata(dev); ++ u16 chmar; ++ ++ mutex_lock(&rtc->mutex); ++ ++ chmar = ((alm->time.tm_hour & 0x1f) << 8) | (alm->time.tm_min & 0x3f); ++ retu_write_reg(rtc->dev, RETU_REG_RTCHMAR, chmar); ++ ++ mutex_unlock(&rtc->mutex); ++ ++ return 0; ++} ++ ++static int retu_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) ++{ ++ struct retu_rtc *rtc = dev_get_drvdata(dev); ++ u16 chmar; ++ ++ mutex_lock(&rtc->mutex); ++ ++ chmar = retu_read_reg(rtc->dev, RETU_REG_RTCHMAR); ++ ++ alm->time.tm_hour = (chmar >> 8) & 0x1f; ++ alm->time.tm_min = chmar & 0x3f; ++ alm->enabled = !!rtc->alarm_expired; ++ ++ mutex_unlock(&rtc->mutex); ++ ++ return 0; ++} ++ ++static int retu_rtc_set_time(struct device *dev, struct rtc_time *tm) ++{ ++ struct retu_rtc *rtc = dev_get_drvdata(dev); ++ u16 dsr; ++ u16 hmr; ++ ++ dsr = ((tm->tm_mday & 0xff) << 8) | (tm->tm_hour & 0xff); ++ hmr = ((tm->tm_min & 0xff) << 8) | (tm->tm_sec & 0xff); ++ ++ mutex_lock(&rtc->mutex); ++ ++ retu_write_reg(rtc->dev, RETU_REG_RTCDSR, dsr); ++ retu_write_reg(rtc->dev, RETU_REG_RTCHMR, hmr); ++ ++ mutex_unlock(&rtc->mutex); ++ ++ return 0; ++} ++ ++static int retu_rtc_read_time(struct device *dev, struct rtc_time *tm) ++{ ++ struct retu_rtc *rtc = dev_get_drvdata(dev); ++ u16 dsr; ++ u16 hmr; ++ ++ /* ++ * DSR holds days and hours ++ * HMR hols minutes and seconds ++ * ++ * both are 16 bit registers with 8-bit for each field. ++ */ ++ ++ mutex_lock(&rtc->mutex); ++ ++ dsr = retu_read_reg(rtc->dev, RETU_REG_RTCDSR); ++ hmr = retu_read_reg(rtc->dev, RETU_REG_RTCHMR); ++ ++ tm->tm_sec = hmr & 0xff; ++ tm->tm_min = hmr >> 8; ++ tm->tm_hour = dsr & 0xff; ++ tm->tm_mday = dsr >> 8; ++ ++ mutex_unlock(&rtc->mutex); ++ ++ return 0; ++} ++ ++static struct rtc_class_ops retu_rtc_ops = { ++ .read_time = retu_rtc_read_time, ++ .set_time = retu_rtc_set_time, ++ .read_alarm = retu_rtc_read_alarm, ++ .set_alarm = retu_rtc_set_alarm, ++}; ++ ++static int __init retu_rtc_probe(struct platform_device *pdev) ++{ ++ struct retu_rtc *rtc; ++ int r; ++ ++ rtc = kzalloc(sizeof(*rtc), GFP_KERNEL); ++ if (!rtc) { ++ dev_err(&pdev->dev, "not enough memory\n"); ++ r = -ENOMEM; ++ goto err0; ++ } ++ ++ rtc->dev = &pdev->dev; ++ platform_set_drvdata(pdev, rtc); ++ mutex_init(&rtc->mutex); ++ ++ rtc->alarm_expired = retu_read_reg(rtc->dev, RETU_REG_IDR) & ++ (0x1 << RETU_INT_RTCA); ++ ++ r = retu_rtc_init_irq(rtc); ++ if (r < 0) { ++ dev_err(&pdev->dev, "failed to request retu irq\n"); ++ goto err1; ++ } ++ ++ /* If the calibration register is zero, we've probably lost power */ ++ if (!(retu_read_reg(rtc->dev, RETU_REG_RTCCALR) & 0x00ff)) ++ retu_rtc_do_reset(rtc); ++ ++ rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, & ++ retu_rtc_ops, THIS_MODULE); ++ if (IS_ERR(rtc->rtc)) { ++ dev_err(&pdev->dev, "can't register RTC device\n"); ++ goto err2; ++ } ++ ++ return 0; ++ ++err2: ++ free_irq(rtc->irq_rtcs, rtc); ++ free_irq(rtc->irq_rtca, rtc); ++ ++err1: ++ kfree(rtc); ++ ++err0: ++ return r; ++} ++ ++static int __devexit retu_rtc_remove(struct platform_device *pdev) ++{ ++ struct retu_rtc *rtc = platform_get_drvdata(pdev); ++ ++ free_irq(rtc->irq_rtcs, rtc); ++ free_irq(rtc->irq_rtca, rtc); ++ rtc_device_unregister(rtc->rtc); ++ kfree(rtc); ++ ++ return 0; ++} ++ ++static struct platform_driver retu_rtc_driver = { ++ .remove = __exit_p(retu_rtc_remove), ++ .driver = { ++ .name = "retu-rtc", ++ }, ++}; ++ ++static int __init retu_rtc_init(void) ++{ ++ return platform_driver_probe(&retu_rtc_driver, retu_rtc_probe); ++} ++module_init(retu_rtc_init); ++ ++static void __exit retu_rtc_exit(void) ++{ ++ platform_driver_unregister(&retu_rtc_driver); ++} ++module_exit(retu_rtc_exit); ++ ++MODULE_DESCRIPTION("Retu RTC"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Paul Mundt"); ++MODULE_AUTHOR("Igor Stoppa"); ++MODULE_AUTHOR("Felipe Balbi "); ++ +--- /dev/null ++++ b/drivers/cbus/retu-wdt.c +@@ -0,0 +1,272 @@ ++/** ++ * drivers/cbus/retu-wdt.c ++ * ++ * Driver for Retu watchdog ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Amit Kucheria ++ * ++ * Cleanups by Michael Buesch (C) 2011 ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++ ++#include "cbus.h" ++#include "retu.h" ++ ++/* Watchdog timeout in seconds */ ++#define RETU_WDT_MIN_TIMER 0 ++#define RETU_WDT_DEFAULT_TIMER 32 ++#define RETU_WDT_MAX_TIMER 63 ++ ++struct retu_wdt_dev { ++ struct device *dev; ++ unsigned int period_val; /* Current period of watchdog */ ++ unsigned long users; ++ struct miscdevice miscdev; ++ struct delayed_work ping_work; ++ struct mutex mutex; ++}; ++ ++ ++static inline void _retu_modify_counter(struct retu_wdt_dev *wdev, ++ unsigned int new) ++{ ++ retu_write_reg(wdev->dev, RETU_REG_WATCHDOG, (u16)new); ++} ++ ++static int retu_modify_counter(struct retu_wdt_dev *wdev, unsigned int new) ++{ ++ if (new < RETU_WDT_MIN_TIMER || new > RETU_WDT_MAX_TIMER) ++ return -EINVAL; ++ ++ mutex_lock(&wdev->mutex); ++ wdev->period_val = new; ++ _retu_modify_counter(wdev, wdev->period_val); ++ mutex_unlock(&wdev->mutex); ++ ++ return 0; ++} ++ ++/* ++ * Since retu watchdog cannot be disabled in hardware, we must kick it ++ * with a timer until userspace watchdog software takes over. Do this ++ * unless /dev/watchdog is open or CONFIG_WATCHDOG_NOWAYOUT is set. ++ */ ++static void retu_wdt_ping_enable(struct retu_wdt_dev *wdev) ++{ ++ _retu_modify_counter(wdev, RETU_WDT_MAX_TIMER); ++ schedule_delayed_work(&wdev->ping_work, ++ round_jiffies_relative(RETU_WDT_DEFAULT_TIMER * HZ)); ++} ++ ++static void retu_wdt_ping_disable(struct retu_wdt_dev *wdev) ++{ ++ _retu_modify_counter(wdev, RETU_WDT_MAX_TIMER); ++ cancel_delayed_work_sync(&wdev->ping_work); ++} ++ ++static void retu_wdt_ping_work(struct work_struct *work) ++{ ++ struct retu_wdt_dev *wdev = container_of(to_delayed_work(work), ++ struct retu_wdt_dev, ping_work); ++ retu_wdt_ping_enable(wdev); ++} ++ ++static int retu_wdt_open(struct inode *inode, struct file *file) ++{ ++ struct miscdevice *mdev = file->private_data; ++ struct retu_wdt_dev *wdev = container_of(mdev, struct retu_wdt_dev, miscdev); ++ ++ if (test_and_set_bit(0, &wdev->users)) ++ return -EBUSY; ++ ++ retu_wdt_ping_disable(wdev); ++ ++ return nonseekable_open(inode, file); ++} ++ ++static int retu_wdt_release(struct inode *inode, struct file *file) ++{ ++ struct miscdevice *mdev = file->private_data; ++ struct retu_wdt_dev *wdev = container_of(mdev, struct retu_wdt_dev, miscdev); ++ ++#ifndef CONFIG_WATCHDOG_NOWAYOUT ++ retu_wdt_ping_enable(wdev); ++#endif ++ clear_bit(0, &wdev->users); ++ ++ return 0; ++} ++ ++static ssize_t retu_wdt_write(struct file *file, const char __user *data, ++ size_t len, loff_t *ppos) ++{ ++ struct miscdevice *mdev = file->private_data; ++ struct retu_wdt_dev *wdev = container_of(mdev, struct retu_wdt_dev, miscdev); ++ ++ if (len) ++ retu_modify_counter(wdev, RETU_WDT_MAX_TIMER); ++ ++ return len; ++} ++ ++static long retu_wdt_ioctl(struct file *file, unsigned int cmd, ++ unsigned long arg) ++{ ++ struct miscdevice *mdev = file->private_data; ++ struct retu_wdt_dev *wdev = container_of(mdev, struct retu_wdt_dev, miscdev); ++ int new_margin; ++ ++ static const struct watchdog_info ident = { ++ .identity = "Retu Watchdog", ++ .options = WDIOF_SETTIMEOUT, ++ .firmware_version = 0, ++ }; ++ ++ switch (cmd) { ++ default: ++ return -ENOTTY; ++ case WDIOC_GETSUPPORT: ++ return copy_to_user((struct watchdog_info __user *)arg, &ident, ++ sizeof(ident)); ++ case WDIOC_GETSTATUS: ++ return put_user(0, (int __user *)arg); ++ case WDIOC_GETBOOTSTATUS: ++ if (cpu_is_omap16xx()) ++ return put_user(omap_readw(ARM_SYSST), ++ (int __user *)arg); ++ if (cpu_is_omap24xx()) ++ return put_user(omap_prcm_get_reset_sources(), ++ (int __user *)arg); ++ case WDIOC_KEEPALIVE: ++ retu_modify_counter(wdev, RETU_WDT_MAX_TIMER); ++ break; ++ case WDIOC_SETTIMEOUT: ++ if (get_user(new_margin, (int __user *)arg)) ++ return -EFAULT; ++ retu_modify_counter(wdev, new_margin); ++ /* Fall through */ ++ case WDIOC_GETTIMEOUT: ++ return put_user(wdev->period_val, (int __user *)arg); ++ } ++ ++ return 0; ++} ++ ++static const struct file_operations retu_wdt_fops = { ++ .owner = THIS_MODULE, ++ .write = retu_wdt_write, ++ .unlocked_ioctl = retu_wdt_ioctl, ++ .open = retu_wdt_open, ++ .release = retu_wdt_release, ++}; ++ ++static int __init retu_wdt_probe(struct platform_device *pdev) ++{ ++ struct retu_wdt_dev *wdev; ++ int ret; ++ ++ wdev = kzalloc(sizeof(struct retu_wdt_dev), GFP_KERNEL); ++ if (!wdev) ++ return -ENOMEM; ++ ++ wdev->dev = &pdev->dev; ++ wdev->period_val = RETU_WDT_DEFAULT_TIMER; ++ mutex_init(&wdev->mutex); ++ ++ platform_set_drvdata(pdev, wdev); ++ ++ wdev->miscdev.parent = &pdev->dev; ++ wdev->miscdev.minor = WATCHDOG_MINOR; ++ wdev->miscdev.name = "watchdog"; ++ wdev->miscdev.fops = &retu_wdt_fops; ++ ++ ret = misc_register(&wdev->miscdev); ++ if (ret) ++ goto err_free_wdev; ++ ++ INIT_DELAYED_WORK(&wdev->ping_work, retu_wdt_ping_work); ++ ++ /* Kick the watchdog for kernel booting to finish. ++ * If nowayout is not set, we start the ping work. */ ++#ifdef CONFIG_WATCHDOG_NOWAYOUT ++ retu_modify_counter(wdev, RETU_WDT_MAX_TIMER); ++#else ++ retu_wdt_ping_enable(wdev); ++#endif ++ ++ return 0; ++ ++err_free_wdev: ++ kfree(wdev); ++ ++ return ret; ++} ++ ++static int __devexit retu_wdt_remove(struct platform_device *pdev) ++{ ++ struct retu_wdt_dev *wdev; ++ ++ wdev = platform_get_drvdata(pdev); ++ misc_deregister(&wdev->miscdev); ++ cancel_delayed_work_sync(&wdev->ping_work); ++ kfree(wdev); ++ ++ return 0; ++} ++ ++static struct platform_driver retu_wdt_driver = { ++ .remove = __exit_p(retu_wdt_remove), ++ .driver = { ++ .name = "retu-wdt", ++ }, ++}; ++ ++static int __init retu_wdt_init(void) ++{ ++ return platform_driver_probe(&retu_wdt_driver, retu_wdt_probe); ++} ++ ++static void __exit retu_wdt_exit(void) ++{ ++ platform_driver_unregister(&retu_wdt_driver); ++} ++ ++module_init(retu_wdt_init); ++module_exit(retu_wdt_exit); ++ ++MODULE_DESCRIPTION("Retu WatchDog"); ++MODULE_AUTHOR("Amit Kucheria"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/cbus/tahvo.c +@@ -0,0 +1,423 @@ ++/** ++ * drivers/cbus/tahvo.c ++ * ++ * Support functions for Tahvo ASIC ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Juha Yrjölä , ++ * David Weinehall , and ++ * Mikko Ylinen ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "cbus.h" ++#include "tahvo.h" ++ ++struct tahvo { ++ /* device lock */ ++ struct mutex mutex; ++ struct device *dev; ++ ++ int irq_base; ++ int irq_end; ++ int irq; ++ ++ int ack; ++ int mask; ++ ++ unsigned int mask_pending:1; ++ unsigned int ack_pending:1; ++ unsigned int is_betty:1; ++}; ++ ++/** ++ * __tahvo_read_reg - Reads a value from a register in Tahvo ++ * @tahvo: pointer to tahvo structure ++ * @reg: the register address to read from ++ */ ++static int __tahvo_read_reg(struct tahvo *tahvo, unsigned reg) ++{ ++ return cbus_read_reg(tahvo->dev, CBUS_TAHVO_DEVICE_ID, reg); ++} ++ ++/** ++ * __tahvo_write_reg - Writes a value to a register in Tahvo ++ * @tahvo: pointer to tahvo structure ++ * @reg: register address to write to ++ * @val: the value to be written to @reg ++ */ ++static void __tahvo_write_reg(struct tahvo *tahvo, unsigned reg, u16 val) ++{ ++ cbus_write_reg(tahvo->dev, CBUS_TAHVO_DEVICE_ID, reg, val); ++} ++ ++/** ++ * tahvo_read_reg - Read a value from a register in Tahvo ++ * @child: device pointer from the calling child ++ * @reg: the register to read from ++ * ++ * This function returns the contents of the specified register ++ */ ++int tahvo_read_reg(struct device *child, unsigned reg) ++{ ++ struct tahvo *tahvo = dev_get_drvdata(child->parent); ++ ++ return __tahvo_read_reg(tahvo, reg); ++} ++EXPORT_SYMBOL(tahvo_read_reg); ++ ++/** ++ * tahvo_write_reg - Write a value to a register in Tahvo ++ * @child: device pointer from the calling child ++ * @reg: the register to write to ++ * @val : the value to write to the register ++ * ++ * This function writes a value to the specified register ++ */ ++void tahvo_write_reg(struct device *child, unsigned reg, u16 val) ++{ ++ struct tahvo *tahvo = dev_get_drvdata(child->parent); ++ ++ __tahvo_write_reg(tahvo, reg, val); ++} ++EXPORT_SYMBOL(tahvo_write_reg); ++ ++/** ++ * tahvo_set_clear_reg_bits - set and clear register bits atomically ++ * @child: device pointer from the calling child ++ * @reg: the register to write to ++ * @bits: the bits to set ++ * ++ * This function sets and clears the specified Tahvo register bits atomically ++ */ ++void tahvo_set_clear_reg_bits(struct device *child, unsigned reg, u16 set, ++ u16 clear) ++{ ++ struct tahvo *tahvo = dev_get_drvdata(child->parent); ++ u16 w; ++ ++ mutex_lock(&tahvo->mutex); ++ w = __tahvo_read_reg(tahvo, reg); ++ w &= ~clear; ++ w |= set; ++ __tahvo_write_reg(tahvo, reg, w); ++ mutex_unlock(&tahvo->mutex); ++} ++ ++static irqreturn_t tahvo_irq_handler(int irq, void *_tahvo) ++{ ++ struct tahvo *tahvo = _tahvo; ++ u16 id; ++ u16 im; ++ ++ id = __tahvo_read_reg(tahvo, TAHVO_REG_IDR); ++ im = __tahvo_read_reg(tahvo, TAHVO_REG_IMR); ++ id &= ~im; ++ ++ if (!id) { ++ dev_vdbg(tahvo->dev, "No IRQ, spurious ?\n"); ++ return IRQ_NONE; ++ } ++ ++ while (id) { ++ unsigned long pending = __ffs(id); ++ unsigned int irq; ++ ++ id &= ~BIT(pending); ++ irq = pending + tahvo->irq_base; ++ handle_nested_irq(irq); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++/* -------------------------------------------------------------------------- */ ++ ++static void tahvo_irq_bus_lock(struct irq_data *data) ++{ ++ struct tahvo *tahvo = irq_data_get_irq_chip_data(data); ++ ++ mutex_lock(&tahvo->mutex); ++} ++ ++static void tahvo_irq_bus_sync_unlock(struct irq_data *data) ++{ ++ struct tahvo *tahvo = irq_data_get_irq_chip_data(data); ++ ++ if (tahvo->mask_pending) { ++ __tahvo_write_reg(tahvo, TAHVO_REG_IMR, tahvo->mask); ++ tahvo->mask_pending = false; ++ } ++ ++ if (tahvo->ack_pending) { ++ __tahvo_write_reg(tahvo, TAHVO_REG_IDR, tahvo->ack); ++ tahvo->ack_pending = false; ++ } ++ ++ mutex_unlock(&tahvo->mutex); ++} ++ ++static void tahvo_irq_mask(struct irq_data *data) ++{ ++ struct tahvo *tahvo = irq_data_get_irq_chip_data(data); ++ int irq = data->irq; ++ ++ tahvo->mask |= (1 << (irq - tahvo->irq_base)); ++ tahvo->mask_pending = true; ++} ++ ++static void tahvo_irq_unmask(struct irq_data *data) ++{ ++ struct tahvo *tahvo = irq_data_get_irq_chip_data(data); ++ int irq = data->irq; ++ ++ tahvo->mask &= ~(1 << (irq - tahvo->irq_base)); ++ tahvo->mask_pending = true; ++} ++ ++static void tahvo_irq_ack(struct irq_data *data) ++{ ++ struct tahvo *tahvo = irq_data_get_irq_chip_data(data); ++ int irq = data->irq; ++ ++ tahvo->ack |= (1 << (irq - tahvo->irq_base)); ++ tahvo->ack_pending = true; ++} ++ ++static struct irq_chip tahvo_irq_chip = { ++ .name = "tahvo", ++ .irq_bus_lock = tahvo_irq_bus_lock, ++ .irq_bus_sync_unlock = tahvo_irq_bus_sync_unlock, ++ .irq_mask = tahvo_irq_mask, ++ .irq_unmask = tahvo_irq_unmask, ++ .irq_ack = tahvo_irq_ack, ++}; ++ ++static inline void tahvo_irq_setup(int irq) ++{ ++#ifdef CONFIG_ARM ++ set_irq_flags(irq, IRQF_VALID); ++#else ++ irq_set_noprobe(irq); ++#endif ++} ++ ++static void tahvo_irq_init(struct tahvo *tahvo) ++{ ++ int base = tahvo->irq_base; ++ int end = tahvo->irq_end; ++ int irq; ++ ++ for (irq = base; irq < end; irq++) { ++ irq_set_chip_data(irq, tahvo); ++ irq_set_chip_and_handler(irq, &tahvo_irq_chip, ++ handle_simple_irq); ++ irq_set_nested_thread(irq, 1); ++ tahvo_irq_setup(irq); ++ } ++} ++ ++/* -------------------------------------------------------------------------- */ ++ ++static struct resource generic_resources[] = { ++ { ++ .start = -EINVAL, /* fixed later */ ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct device *tahvo_allocate_child(const char *name, ++ struct device *parent, int irq) ++{ ++ struct platform_device *pdev; ++ int ret; ++ ++ pdev = platform_device_alloc(name, -1); ++ if (!pdev) { ++ dev_dbg(parent, "can't allocate %s\n", name); ++ goto err0; ++ } ++ ++ pdev->dev.parent = parent; ++ ++ if (irq > 0) { ++ generic_resources[0].start = irq; ++ ++ ret = platform_device_add_resources(pdev, generic_resources, ++ ARRAY_SIZE(generic_resources)); ++ if (ret < 0) { ++ dev_dbg(parent, "can't add resources to %s\n", name); ++ goto err1; ++ } ++ } ++ ++ ret = platform_device_add(pdev); ++ if (ret < 0) { ++ dev_dbg(parent, "can't add %s\n", name); ++ goto err1; ++ } ++ ++ return &pdev->dev; ++ ++err1: ++ platform_device_put(pdev); ++ ++err0: ++ return NULL; ++} ++ ++static int tahvo_allocate_children(struct device *parent, int irq_base) ++{ ++ struct device *child; ++ ++ child = tahvo_allocate_child("tahvo-usb", parent, ++ irq_base + TAHVO_INT_VBUSON); ++ if (!child) ++ return -ENOMEM; ++ ++ child = tahvo_allocate_child("tahvo-pwm", parent, -1); ++ if (!child) ++ return -ENOMEM; ++ ++ return 0; ++} ++ ++static int __devinit tahvo_probe(struct platform_device *pdev) ++{ ++ struct tahvo *tahvo; ++ int rev; ++ int ret; ++ int irq; ++ int id; ++ ++ tahvo = kzalloc(sizeof(*tahvo), GFP_KERNEL); ++ if (!tahvo) { ++ dev_err(&pdev->dev, "not enough memory\n"); ++ ret = -ENOMEM; ++ goto err0; ++ } ++ ++ irq = platform_get_irq(pdev, 0); ++ platform_set_drvdata(pdev, tahvo); ++ ++ mutex_init(&tahvo->mutex); ++ ++ ret = irq_alloc_descs(-1, 0, MAX_TAHVO_IRQ_HANDLERS, 0); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "failed to allocate IRQ descs\n"); ++ goto err1; ++ } ++ ++ tahvo->irq_base = ret; ++ tahvo->irq_end = ret + MAX_TAHVO_IRQ_HANDLERS; ++ tahvo->dev = &pdev->dev; ++ tahvo->irq = irq; ++ ++ tahvo_irq_init(tahvo); ++ ++ rev = __tahvo_read_reg(tahvo, TAHVO_REG_ASICR); ++ ++ id = (rev >> 8) & 0xff; ++ ++ if (id == 0x0b) ++ tahvo->is_betty = true; ++ ++ ret = tahvo_allocate_children(&pdev->dev, tahvo->irq_base); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "failed to allocate children\n"); ++ goto err2; ++ } ++ ++ dev_err(&pdev->dev, "%s v%d.%d found\n", ++ tahvo->is_betty ? "Betty" : "Tahvo", ++ (rev >> 4) & 0x0f, rev & 0x0f); ++ ++ /* Mask all TAHVO interrupts */ ++ __tahvo_write_reg(tahvo, TAHVO_REG_IMR, 0xffff); ++ ++ ret = request_threaded_irq(irq, NULL, tahvo_irq_handler, ++ IRQF_TRIGGER_RISING | IRQF_ONESHOT, ++ "tahvo", tahvo); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "Unable to register IRQ handler\n"); ++ goto err2; ++ } ++ ++ return 0; ++ ++err2: ++ irq_free_descs(tahvo->irq_base, MAX_TAHVO_IRQ_HANDLERS); ++ ++err1: ++ kfree(tahvo); ++ ++err0: ++ return ret; ++} ++ ++static int __devexit tahvo_remove(struct platform_device *pdev) ++{ ++ struct tahvo *tahvo = platform_get_drvdata(pdev); ++ int irq; ++ ++ irq = platform_get_irq(pdev, 0); ++ ++ free_irq(irq, 0); ++ irq_free_descs(tahvo->irq_base, MAX_TAHVO_IRQ_HANDLERS); ++ kfree(tahvo); ++ ++ return 0; ++} ++ ++static struct platform_driver tahvo_driver = { ++ .probe = tahvo_probe, ++ .remove = __devexit_p(tahvo_remove), ++ .driver = { ++ .name = "tahvo", ++ }, ++}; ++ ++static int __init tahvo_init(void) ++{ ++ return platform_driver_register(&tahvo_driver); ++} ++subsys_initcall(tahvo_init); ++ ++static void __exit tahvo_exit(void) ++{ ++ platform_driver_unregister(&tahvo_driver); ++} ++module_exit(tahvo_exit); ++ ++MODULE_DESCRIPTION("Tahvo ASIC control"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Juha Yrjölä"); ++MODULE_AUTHOR("David Weinehall"); ++MODULE_AUTHOR("Mikko Ylinen"); ++ +--- /dev/null ++++ b/drivers/cbus/tahvo.h +@@ -0,0 +1,58 @@ ++/* ++ * drivers/cbus/tahvo.h ++ * ++ * Copyright (C) 2004, 2005 Nokia Corporation ++ * ++ * Written by Juha Yrjölä and ++ * David Weinehall ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __DRIVERS_CBUS_TAHVO_H ++#define __DRIVERS_CBUS_TAHVO_H ++ ++#include ++ ++/* Registers */ ++#define TAHVO_REG_ASICR 0x00 /* ASIC ID & revision */ ++#define TAHVO_REG_IDR 0x01 /* Interrupt ID */ ++#define TAHVO_REG_IDSR 0x02 /* Interrupt status */ ++#define TAHVO_REG_IMR 0x03 /* Interrupt mask */ ++#define TAHVO_REG_CHGCURR 0x04 /* Charge current control PWM (8-bit) */ ++#define TAHVO_REG_LEDPWMR 0x05 /* LED PWM */ ++#define TAHVO_REG_USBR 0x06 /* USB control */ ++#define TAHVO_REG_CHGCTL 0x08 /* Charge control register */ ++#define TAHVO_REG_CHGCTL_EN 0x0001 /* Global charge enable */ ++#define TAHVO_REG_CHGCTL_PWMOVR 0x0004 /* PWM override. Force charge PWM to 0%/100% duty cycle. */ ++#define TAHVO_REG_CHGCTL_PWMOVRZERO 0x0008 /* If set, PWM override is 0% (If unset -> 100%) */ ++#define TAHVO_REG_CHGCTL_CURMEAS 0x0040 /* Enable battery current measurement. */ ++#define TAHVO_REG_CHGCTL_CURTIMRST 0x0080 /* Current measure timer reset. */ ++#define TAHVO_REG_BATCURRTIMER 0x0c /* Battery current measure timer (8-bit) */ ++#define TAHVO_REG_BATCURR 0x0d /* Battery (dis)charge current (signed 16-bit) */ ++ ++#define TAHVO_REG_MAX 0x0d ++ ++/* Interrupt sources */ ++#define TAHVO_INT_VBUSON 0 ++#define TAHVO_INT_BATCURR 7 /* Battery current measure timer */ ++ ++#define MAX_TAHVO_IRQ_HANDLERS 8 ++ ++int tahvo_read_reg(struct device *child, unsigned reg); ++void tahvo_write_reg(struct device *child, unsigned reg, u16 val); ++void tahvo_set_clear_reg_bits(struct device *child, unsigned reg, u16 set, ++ u16 clear); ++ ++#endif /* __DRIVERS_CBUS_TAHVO_H */ +--- /dev/null ++++ b/drivers/cbus/tahvo-usb.c +@@ -0,0 +1,740 @@ ++/** ++ * drivers/cbus/tahvo-usb.c ++ * ++ * Tahvo USB transeiver ++ * ++ * Copyright (C) 2005-2006 Nokia Corporation ++ * ++ * Parts copied from drivers/i2c/chips/isp1301_omap.c ++ * Copyright (C) 2004 Texas Instruments ++ * Copyright (C) 2004 David Brownell ++ * ++ * Written by Juha Yrjölä , ++ * Tony Lindgren , and ++ * Timo Teräs ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "cbus.h" ++#include "tahvo.h" ++ ++#define DRIVER_NAME "tahvo-usb" ++ ++#define USBR_SLAVE_CONTROL (1 << 8) ++#define USBR_VPPVIO_SW (1 << 7) ++#define USBR_SPEED (1 << 6) ++#define USBR_REGOUT (1 << 5) ++#define USBR_MASTER_SW2 (1 << 4) ++#define USBR_MASTER_SW1 (1 << 3) ++#define USBR_SLAVE_SW (1 << 2) ++#define USBR_NSUSPEND (1 << 1) ++#define USBR_SEMODE (1 << 0) ++ ++/* bits in OTG_CTRL */ ++ ++/* Bits that are controlled by OMAP OTG and are read-only */ ++#define OTG_CTRL_OMAP_MASK (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|\ ++ OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID) ++/* Bits that are controlled by transceiver */ ++#define OTG_CTRL_XCVR_MASK (OTG_ASESSVLD|OTG_BSESSEND|\ ++ OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID) ++/* Bits that are controlled by system */ ++#define OTG_CTRL_SYS_MASK (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|\ ++ OTG_B_HNPEN|OTG_BUSDROP) ++ ++#if defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OTG) ++#error tahvo-otg.c does not work with OCHI yet! ++#endif ++ ++#define TAHVO_MODE_HOST 0 ++#define TAHVO_MODE_PERIPHERAL 1 ++ ++#ifdef CONFIG_USB_OTG ++#define TAHVO_MODE(tu) (tu)->tahvo_mode ++#elif defined(CONFIG_USB_GADGET_OMAP) ++#define TAHVO_MODE(tu) TAHVO_MODE_PERIPHERAL ++#else ++#define TAHVO_MODE(tu) TAHVO_MODE_HOST ++#endif ++ ++struct tahvo_usb { ++ struct device *dev; ++ struct platform_device *pt_dev; ++ struct otg_transceiver otg; ++ int vbus_state; ++ struct mutex serialize; ++#ifdef CONFIG_USB_OTG ++ int tahvo_mode; ++#endif ++ struct clk *ick; ++ ++ int irq; ++}; ++static struct tahvo_usb *tahvo_usb_device; ++ ++/* ++ * --------------------------------------------------------------------------- ++ * OTG related functions ++ * ++ * These shoud be separated into omap-otg.c driver module, as they are used ++ * by various transceivers. These functions are needed in the UDC-only case ++ * as well. These functions are copied from GPL isp1301_omap.c ++ * --------------------------------------------------------------------------- ++ */ ++static struct platform_device *tahvo_otg_dev; ++ ++static irqreturn_t omap_otg_irq(int irq, void *arg) ++{ ++ u16 otg_irq; ++ ++ otg_irq = omap_readw(OTG_IRQ_SRC); ++ if (otg_irq & OPRT_CHG) { ++ omap_writew(OPRT_CHG, OTG_IRQ_SRC); ++ } else if (otg_irq & B_SRP_TMROUT) { ++ omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC); ++ } else if (otg_irq & B_HNP_FAIL) { ++ omap_writew(B_HNP_FAIL, OTG_IRQ_SRC); ++ } else if (otg_irq & A_SRP_DETECT) { ++ omap_writew(A_SRP_DETECT, OTG_IRQ_SRC); ++ } else if (otg_irq & A_REQ_TMROUT) { ++ omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC); ++ } else if (otg_irq & A_VBUS_ERR) { ++ omap_writew(A_VBUS_ERR, OTG_IRQ_SRC); ++ } else if (otg_irq & DRIVER_SWITCH) { ++#ifdef CONFIG_USB_OTG ++ if ((!(omap_readl(OTG_CTRL) & OTG_DRIVER_SEL)) && ++ tu->otg.host && tu->otg.state == OTG_STATE_A_HOST) { ++ /* role is host */ ++ usb_bus_start_enum(tu->otg.host, ++ tu->otg.host->otg_port); ++ } ++#endif ++ omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC); ++ } else ++ return IRQ_NONE; ++ ++ return IRQ_HANDLED; ++ ++} ++ ++static int tahvo_otg_init(void) ++{ ++ u32 l; ++ ++#ifdef CONFIG_USB_OTG ++ if (!tahvo_otg_dev) { ++ printk("tahvo-usb: no tahvo_otg_dev\n"); ++ return -ENODEV; ++ } ++#endif ++ ++ l = omap_readl(OTG_SYSCON_1); ++ l &= ~OTG_IDLE_EN; ++ omap_writel(l, OTG_SYSCON_1); ++ udelay(100); ++ ++ /* some of these values are board-specific... */ ++ l = omap_readl(OTG_SYSCON_2); ++ l |= OTG_EN ++ /* for B-device: */ ++ | SRP_GPDATA /* 9msec Bdev D+ pulse */ ++ | SRP_GPDVBUS /* discharge after VBUS pulse */ ++ // | (3 << 24) /* 2msec VBUS pulse */ ++ /* for A-device: */ ++ | (0 << 20) /* 200ms nominal A_WAIT_VRISE timer */ ++ | SRP_DPW /* detect 167+ns SRP pulses */ ++ | SRP_DATA | SRP_VBUS; /* accept both kinds of SRP pulse */ ++ omap_writel(l, OTG_SYSCON_2); ++ ++ omap_writew(DRIVER_SWITCH | OPRT_CHG ++ | B_SRP_TMROUT | B_HNP_FAIL ++ | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT, ++ OTG_IRQ_EN); ++ l = omap_readl(OTG_SYSCON_2); ++ l |= OTG_EN; ++ omap_writel(l, OTG_SYSCON_2); ++ ++ return 0; ++} ++ ++static int __init omap_otg_probe(struct platform_device *pdev) ++{ ++ int ret; ++ ++ tahvo_otg_dev = pdev; ++ ret = tahvo_otg_init(); ++ if (ret != 0) { ++ printk(KERN_ERR "tahvo-usb: tahvo_otg_init failed\n"); ++ return ret; ++ } ++ ++ return request_irq(tahvo_otg_dev->resource[1].start, ++ omap_otg_irq, IRQF_DISABLED, DRIVER_NAME, ++ tahvo_usb_device); ++} ++ ++static int __exit omap_otg_remove(struct platform_device *pdev) ++{ ++ free_irq(tahvo_otg_dev->resource[1].start, tahvo_usb_device); ++ tahvo_otg_dev = NULL; ++ ++ return 0; ++} ++ ++struct platform_driver omap_otg_driver = { ++ .driver = { ++ .name = "omap_otg", ++ }, ++ .remove = __exit_p(omap_otg_remove), ++}; ++ ++/* ++ * --------------------------------------------------------------------------- ++ * Tahvo related functions ++ * These are Nokia proprietary code, except for the OTG register settings, ++ * which are copied from isp1301.c ++ * --------------------------------------------------------------------------- ++ */ ++static ssize_t vbus_state_show(struct device *device, ++ struct device_attribute *attr, char *buf) ++{ ++ struct tahvo_usb *tu = dev_get_drvdata(device); ++ return sprintf(buf, "%d\n", tu->vbus_state); ++} ++static DEVICE_ATTR(vbus_state, 0444, vbus_state_show, NULL); ++ ++int vbus_active = 0; ++ ++static void check_vbus_state(struct tahvo_usb *tu) ++{ ++ int reg, prev_state; ++ ++ reg = tahvo_read_reg(tu->dev, TAHVO_REG_IDSR); ++ if (reg & 0x01) { ++ u32 l; ++ ++ vbus_active = 1; ++ switch (tu->otg.state) { ++ case OTG_STATE_B_IDLE: ++ /* Enable the gadget driver */ ++ if (tu->otg.gadget) ++ usb_gadget_vbus_connect(tu->otg.gadget); ++ /* Set B-session valid and not B-sessio ended to indicate ++ * Vbus to be ok. */ ++ l = omap_readl(OTG_CTRL); ++ l &= ~OTG_BSESSEND; ++ l |= OTG_BSESSVLD; ++ omap_writel(l, OTG_CTRL); ++ ++ tu->otg.state = OTG_STATE_B_PERIPHERAL; ++ break; ++ case OTG_STATE_A_IDLE: ++ /* Session is now valid assuming the USB hub is driving Vbus */ ++ tu->otg.state = OTG_STATE_A_HOST; ++ break; ++ default: ++ break; ++ } ++ printk("USB cable connected\n"); ++ } else { ++ switch (tu->otg.state) { ++ case OTG_STATE_B_PERIPHERAL: ++ if (tu->otg.gadget) ++ usb_gadget_vbus_disconnect(tu->otg.gadget); ++ tu->otg.state = OTG_STATE_B_IDLE; ++ break; ++ case OTG_STATE_A_HOST: ++ tu->otg.state = OTG_STATE_A_IDLE; ++ break; ++ default: ++ break; ++ } ++ printk("USB cable disconnected\n"); ++ vbus_active = 0; ++ } ++ ++ prev_state = tu->vbus_state; ++ tu->vbus_state = reg & 0x01; ++ if (prev_state != tu->vbus_state) ++ sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state"); ++} ++ ++static void tahvo_usb_become_host(struct tahvo_usb *tu) ++{ ++ u32 l; ++ ++ /* Clear system and transceiver controlled bits ++ * also mark the A-session is always valid */ ++ tahvo_otg_init(); ++ ++ l = omap_readl(OTG_CTRL); ++ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK); ++ l |= OTG_ASESSVLD; ++ omap_writel(l, OTG_CTRL); ++ ++ /* Power up the transceiver in USB host mode */ ++ tahvo_write_reg(tu->dev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND | ++ USBR_MASTER_SW2 | USBR_MASTER_SW1); ++ tu->otg.state = OTG_STATE_A_IDLE; ++ ++ check_vbus_state(tu); ++} ++ ++static void tahvo_usb_stop_host(struct tahvo_usb *tu) ++{ ++ tu->otg.state = OTG_STATE_A_IDLE; ++} ++ ++static void tahvo_usb_become_peripheral(struct tahvo_usb *tu) ++{ ++ u32 l; ++ ++ /* Clear system and transceiver controlled bits ++ * and enable ID to mark peripheral mode and ++ * BSESSEND to mark no Vbus */ ++ tahvo_otg_init(); ++ l = omap_readl(OTG_CTRL); ++ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD); ++ l |= OTG_ID | OTG_BSESSEND; ++ omap_writel(l, OTG_CTRL); ++ ++ /* Power up transceiver and set it in USB perhiperal mode */ ++ tahvo_write_reg(tu->dev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT | USBR_NSUSPEND | USBR_SLAVE_SW); ++ tu->otg.state = OTG_STATE_B_IDLE; ++ ++ check_vbus_state(tu); ++} ++ ++static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu) ++{ ++ u32 l; ++ ++ l = omap_readl(OTG_CTRL); ++ l &= ~OTG_BSESSVLD; ++ l |= OTG_BSESSEND; ++ omap_writel(l, OTG_CTRL); ++ ++ if (tu->otg.gadget) ++ usb_gadget_vbus_disconnect(tu->otg.gadget); ++ tu->otg.state = OTG_STATE_B_IDLE; ++ ++} ++ ++static void tahvo_usb_power_off(struct tahvo_usb *tu) ++{ ++ u32 l; ++ int id; ++ ++ /* Disable gadget controller if any */ ++ if (tu->otg.gadget) ++ usb_gadget_vbus_disconnect(tu->otg.gadget); ++ ++ /* Disable OTG and interrupts */ ++ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL) ++ id = OTG_ID; ++ else ++ id = 0; ++ l = omap_readl(OTG_CTRL); ++ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD); ++ l |= id | OTG_BSESSEND; ++ omap_writel(l, OTG_CTRL); ++ omap_writew(0, OTG_IRQ_EN); ++ ++ l = omap_readl(OTG_SYSCON_2); ++ l &= ~OTG_EN; ++ omap_writel(l, OTG_SYSCON_2); ++ ++ l = omap_readl(OTG_SYSCON_1); ++ l |= OTG_IDLE_EN; ++ omap_writel(l, OTG_SYSCON_1); ++ ++ /* Power off transceiver */ ++ tahvo_write_reg(tu->dev, TAHVO_REG_USBR, 0); ++ tu->otg.state = OTG_STATE_UNDEFINED; ++} ++ ++ ++static int tahvo_usb_set_power(struct otg_transceiver *dev, unsigned mA) ++{ ++ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg); ++ ++ dev_dbg(&tu->pt_dev->dev, "set_power %d mA\n", mA); ++ ++ if (dev->state == OTG_STATE_B_PERIPHERAL) { ++ /* REVISIT: Can Tahvo charge battery from VBUS? */ ++ } ++ return 0; ++} ++ ++static int tahvo_usb_set_suspend(struct otg_transceiver *dev, int suspend) ++{ ++ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg); ++ u16 w; ++ ++ dev_dbg(&tu->pt_dev->dev, "set_suspend\n"); ++ ++ w = tahvo_read_reg(tu->dev, TAHVO_REG_USBR); ++ if (suspend) ++ w &= ~USBR_NSUSPEND; ++ else ++ w |= USBR_NSUSPEND; ++ tahvo_write_reg(tu->dev, TAHVO_REG_USBR, w); ++ ++ return 0; ++} ++ ++static int tahvo_usb_start_srp(struct otg_transceiver *dev) ++{ ++ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg); ++ u32 otg_ctrl; ++ ++ dev_dbg(&tu->pt_dev->dev, "start_srp\n"); ++ ++ if (!dev || tu->otg.state != OTG_STATE_B_IDLE) ++ return -ENODEV; ++ ++ otg_ctrl = omap_readl(OTG_CTRL); ++ if (!(otg_ctrl & OTG_BSESSEND)) ++ return -EINVAL; ++ ++ otg_ctrl |= OTG_B_BUSREQ; ++ otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_SYS_MASK; ++ omap_writel(otg_ctrl, OTG_CTRL); ++ tu->otg.state = OTG_STATE_B_SRP_INIT; ++ ++ return 0; ++} ++ ++static int tahvo_usb_start_hnp(struct otg_transceiver *otg) ++{ ++ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg); ++ ++ dev_dbg(&tu->pt_dev->dev, "start_hnp\n"); ++#ifdef CONFIG_USB_OTG ++ /* REVISIT: Add this for OTG */ ++#endif ++ return -EINVAL; ++} ++ ++static int tahvo_usb_set_host(struct otg_transceiver *otg, struct usb_bus *host) ++{ ++ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg); ++ u32 l; ++ ++ dev_dbg(&tu->pt_dev->dev, "set_host %p\n", host); ++ ++ if (otg == NULL) ++ return -ENODEV; ++ ++#if defined(CONFIG_USB_OTG) || !defined(CONFIG_USB_GADGET_OMAP) ++ ++ mutex_lock(&tu->serialize); ++ ++ if (host == NULL) { ++ if (TAHVO_MODE(tu) == TAHVO_MODE_HOST) ++ tahvo_usb_power_off(tu); ++ tu->otg.host = NULL; ++ mutex_unlock(&tu->serialize); ++ return 0; ++ } ++ ++ l = omap_readl(OTG_SYSCON_1); ++ l &= ~(OTG_IDLE_EN | HST_IDLE_EN | DEV_IDLE_EN); ++ omap_writel(l, OTG_SYSCON_1); ++ ++ if (TAHVO_MODE(tu) == TAHVO_MODE_HOST) { ++ tu->otg.host = NULL; ++ tahvo_usb_become_host(tu); ++ } ++ ++ tu->otg.host = host; ++ ++ mutex_unlock(&tu->serialize); ++#else ++ /* No host mode configured, so do not allow host controlled to be set */ ++ return -EINVAL; ++#endif ++ ++ return 0; ++} ++ ++static int tahvo_usb_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) ++{ ++ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg); ++ ++ dev_dbg(&tu->pt_dev->dev, "set_peripheral %p\n", gadget); ++ ++ if (!otg) ++ return -ENODEV; ++ ++#if defined(CONFIG_USB_OTG) || defined(CONFIG_USB_GADGET_OMAP) ++ ++ mutex_lock(&tu->serialize); ++ ++ if (!gadget) { ++ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL) ++ tahvo_usb_power_off(tu); ++ tu->otg.gadget = NULL; ++ mutex_unlock(&tu->serialize); ++ return 0; ++ } ++ ++ tu->otg.gadget = gadget; ++ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL) ++ tahvo_usb_become_peripheral(tu); ++ ++ mutex_unlock(&tu->serialize); ++#else ++ /* No gadget mode configured, so do not allow host controlled to be set */ ++ return -EINVAL; ++#endif ++ ++ return 0; ++} ++ ++static irqreturn_t tahvo_usb_vbus_interrupt(int irq, void *_tu) ++{ ++ struct tahvo_usb *tu = _tu; ++ ++ check_vbus_state(tu); ++ ++ return IRQ_HANDLED; ++} ++ ++#ifdef CONFIG_USB_OTG ++static ssize_t otg_mode_show(struct device *device, ++ struct device_attribute *attr, char *buf) ++{ ++ struct tahvo_usb *tu = dev_get_drvdata(device); ++ switch (tu->tahvo_mode) { ++ case TAHVO_MODE_HOST: ++ return sprintf(buf, "host\n"); ++ case TAHVO_MODE_PERIPHERAL: ++ return sprintf(buf, "peripheral\n"); ++ } ++ return sprintf(buf, "unknown\n"); ++} ++ ++static ssize_t otg_mode_store(struct device *device, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct tahvo_usb *tu = dev_get_drvdata(device); ++ int r; ++ ++ r = strlen(buf); ++ mutex_lock(&tu->serialize); ++ if (strncmp(buf, "host", 4) == 0) { ++ if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL) ++ tahvo_usb_stop_peripheral(tu); ++ tu->tahvo_mode = TAHVO_MODE_HOST; ++ if (tu->otg.host) { ++ printk(KERN_INFO "Selected HOST mode: host controller present.\n"); ++ tahvo_usb_become_host(tu); ++ } else { ++ printk(KERN_INFO "Selected HOST mode: no host controller, powering off.\n"); ++ tahvo_usb_power_off(tu); ++ } ++ } else if (strncmp(buf, "peripheral", 10) == 0) { ++ if (tu->tahvo_mode == TAHVO_MODE_HOST) ++ tahvo_usb_stop_host(tu); ++ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL; ++ if (tu->otg.gadget) { ++ printk(KERN_INFO "Selected PERIPHERAL mode: gadget driver present.\n"); ++ tahvo_usb_become_peripheral(tu); ++ } else { ++ printk(KERN_INFO "Selected PERIPHERAL mode: no gadget driver, powering off.\n"); ++ tahvo_usb_power_off(tu); ++ } ++ } else ++ r = -EINVAL; ++ ++ mutex_unlock(&tu->serialize); ++ return r; ++} ++ ++static DEVICE_ATTR(otg_mode, 0644, otg_mode_show, otg_mode_store); ++#endif ++ ++static int __init tahvo_usb_probe(struct platform_device *pdev) ++{ ++ struct tahvo_usb *tu; ++ struct device *dev = &pdev->dev; ++ int ret; ++ int irq; ++ ++ dev_dbg(dev, "probe\n"); ++ ++ /* Create driver data */ ++ tu = kzalloc(sizeof(*tu), GFP_KERNEL); ++ if (!tu) ++ return -ENOMEM; ++ tahvo_usb_device = tu; ++ ++ tu->dev = dev; ++ tu->pt_dev = pdev; ++#ifdef CONFIG_USB_OTG ++ /* Default mode */ ++#ifdef CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT ++ tu->tahvo_mode = TAHVO_MODE_HOST; ++#else ++ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL; ++#endif ++#endif ++ ++ mutex_init(&tu->serialize); ++ ++ tu->ick = clk_get(NULL, "usb_l4_ick"); ++ if (IS_ERR(tu->ick)) { ++ dev_err(dev, "Failed to get usb_l4_ick\n"); ++ ret = PTR_ERR(tu->ick); ++ goto err_free_tu; ++ } ++ clk_enable(tu->ick); ++ ++ /* Set initial state, so that we generate kevents only on ++ * state changes */ ++ tu->vbus_state = tahvo_read_reg(tu->dev, TAHVO_REG_IDSR) & 0x01; ++ ++ irq = platform_get_irq(pdev, 0); ++ tu->irq = irq; ++ ++ /* We cannot enable interrupt until omap_udc is initialized */ ++ ret = request_threaded_irq(irq, NULL, tahvo_usb_vbus_interrupt, ++ IRQF_ONESHOT, "tahvo-vbus", tu); ++ if (ret != 0) { ++ printk(KERN_ERR "Could not register Tahvo interrupt for VBUS\n"); ++ goto err_release_clk; ++ } ++ ++ /* Attributes */ ++ ret = device_create_file(dev, &dev_attr_vbus_state); ++#ifdef CONFIG_USB_OTG ++ ret |= device_create_file(dev, &dev_attr_otg_mode); ++#endif ++ if (ret) ++ printk(KERN_ERR "attribute creation failed: %d\n", ret); ++ ++ /* Create OTG interface */ ++ tahvo_usb_power_off(tu); ++ tu->otg.state = OTG_STATE_UNDEFINED; ++ tu->otg.label = DRIVER_NAME; ++ tu->otg.set_host = tahvo_usb_set_host; ++ tu->otg.set_peripheral = tahvo_usb_set_peripheral; ++ tu->otg.set_power = tahvo_usb_set_power; ++ tu->otg.set_suspend = tahvo_usb_set_suspend; ++ tu->otg.start_srp = tahvo_usb_start_srp; ++ tu->otg.start_hnp = tahvo_usb_start_hnp; ++ ++ ret = otg_set_transceiver(&tu->otg); ++ if (ret < 0) { ++ printk(KERN_ERR "Cannot register USB transceiver\n"); ++ goto err_free_irq; ++ } ++ ++ dev_set_drvdata(dev, tu); ++ ++ return 0; ++ ++err_free_irq: ++ free_irq(tu->irq, tu); ++err_release_clk: ++ clk_disable(tu->ick); ++ clk_put(tu->ick); ++err_free_tu: ++ kfree(tu); ++ tahvo_usb_device = NULL; ++ ++ return ret; ++} ++ ++static int __exit tahvo_usb_remove(struct platform_device *pdev) ++{ ++ struct tahvo_usb *tu = platform_get_drvdata(pdev); ++ ++ dev_dbg(&pdev->dev, "remove\n"); ++ ++ free_irq(tu->irq, tu); ++ flush_scheduled_work(); ++ otg_set_transceiver(0); ++ device_remove_file(&pdev->dev, &dev_attr_vbus_state); ++#ifdef CONFIG_USB_OTG ++ device_remove_file(&pdev->dev, &dev_attr_otg_mode); ++#endif ++ clk_disable(tu->ick); ++ clk_put(tu->ick); ++ ++ kfree(tu); ++ tahvo_usb_device = NULL; ++ ++ return 0; ++} ++ ++static struct platform_driver tahvo_usb_driver = { ++ .driver = { ++ .name = "tahvo-usb", ++ }, ++ .remove = __exit_p(tahvo_usb_remove), ++}; ++ ++static int __init tahvo_usb_init(void) ++{ ++ int ret = 0; ++ ++ ret = platform_driver_probe(&tahvo_usb_driver, tahvo_usb_probe); ++ if (ret) ++ return ret; ++ ++ ret = platform_driver_probe(&omap_otg_driver, omap_otg_probe); ++ if (ret) { ++ platform_driver_unregister(&tahvo_usb_driver); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++subsys_initcall(tahvo_usb_init); ++ ++static void __exit tahvo_usb_exit(void) ++{ ++ platform_driver_unregister(&omap_otg_driver); ++ platform_driver_unregister(&tahvo_usb_driver); ++} ++module_exit(tahvo_usb_exit); ++ ++MODULE_DESCRIPTION("Tahvo USB OTG Transceiver Driver"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Juha Yrjölä, Tony Lindgren, and Timo Teräs"); +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -78,7 +78,7 @@ obj-$(CONFIG_GAMEPORT) += input/gamepor + obj-$(CONFIG_INPUT) += input/ + obj-$(CONFIG_I2O) += message/ + obj-$(CONFIG_RTC_LIB) += rtc/ +-obj-y += i2c/ media/ ++obj-y += i2c/ media/ cbus/ + obj-$(CONFIG_PPS) += pps/ + obj-$(CONFIG_PTP_1588_CLOCK) += ptp/ + obj-$(CONFIG_W1) += w1/ +--- a/drivers/Kconfig ++++ b/drivers/Kconfig +@@ -2,6 +2,8 @@ menu "Device Drivers" + + source "drivers/base/Kconfig" + ++source "drivers/cbus/Kconfig" ++ + source "drivers/connector/Kconfig" + + source "drivers/mtd/Kconfig" -- cgit v1.2.3