From 17c7b6c3fdc48301e50d22cc6138ede16bd1be24 Mon Sep 17 00:00:00 2001 From: nbd Date: Thu, 6 Sep 2007 16:27:37 +0000 Subject: strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX__ becomes CONFIG_TARGET_, same for profiles. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../files/arch/ppc/platforms/4xx/magicbox.c | 297 +++++++++++++++++++++ .../files/arch/ppc/platforms/4xx/magicbox.h | 46 ++++ .../magicbox/files/drivers/ide/ppc/magicbox_ide.c | 152 +++++++++++ 3 files changed, 495 insertions(+) create mode 100644 target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.c create mode 100644 target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.h create mode 100644 target/linux/magicbox/files/drivers/ide/ppc/magicbox_ide.c (limited to 'target/linux/magicbox/files') diff --git a/target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.c b/target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.c new file mode 100644 index 000000000..18c67ab5f --- /dev/null +++ b/target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.c @@ -0,0 +1,297 @@ +/* + * Support for IBM PPC 405EP-based MagicBox board + * Copyright (C) 2006 Karol Lewandowski + * + * Heavily based on bubinga.c + * + * Author: SAW (IBM), derived from walnut.c. + * Maintained by MontaVista Software + * + * 2003 (c) MontaVista Softare Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +extern bd_t __res; + +/* Some IRQs unique to the board + * Used by the generic 405 PCI setup functions in ppc4xx_pci.c + */ +int __init +ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {28, 28, 28, 28}, /* IDSEL 1 - PCI slot 1 */ + {29, 29, 29, 29}, /* IDSEL 2 - PCI slot 2 */ + {30, 30, 30, 30}, /* IDSEL 3 - PCI slot 3 */ + {31, 31, 31, 31}, /* IDSEL 4 - PCI slot 4 */ + }; + + const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +}; + +/* The serial clock for the chip is an internal clock determined by + * different clock speeds/dividers. + * Calculate the proper input baud rate and setup the serial driver. + */ +static void __init +magicbox_early_serial_map(void) +{ + u32 uart_div; + int uart_clock; + struct uart_port port; + + /* Calculate the serial clock input frequency + * + * The base baud is the PLL OUTA (provided in the board info + * structure) divided by the external UART Divisor, divided + * by 16. + */ + uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV); + uart_clock = __res.bi_procfreq / uart_div; + + /* Setup serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = (void*)ACTING_UART0_IO_BASE; + port.irq = ACTING_UART0_INT; + port.uartclk = uart_clock; + port.regshift = 0; + port.iotype = UPIO_MEM; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 0 failed\n"); + } + + port.membase = (void*)ACTING_UART1_IO_BASE; + port.irq = ACTING_UART1_INT; + port.line = 1; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 1 failed\n"); + } +} + +void __init +bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) +{ +#ifdef CONFIG_PCI + + unsigned int bar_response, bar; + /* + * Expected PCI mapping: + * + * PLB addr PCI memory addr + * --------------------- --------------------- + * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff + * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff + * + * PLB addr PCI io addr + * --------------------- --------------------- + * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000 + * + * The following code is simplified by assuming that the bootrom + * has been well behaved in following this mapping. + */ + +#ifdef DEBUG + int i; + + printk("ioremap PCLIO_BASE = 0x%x\n", pcip); + printk("PCI bridge regs before fixup \n"); + for (i = 0; i <= 3; i++) { + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma))); + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la))); + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila))); + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha))); + } + printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms))); + printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la))); + printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms))); + printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la))); + +#endif + + /* added for IBM boot rom version 1.15 bios bar changes -AK */ + + /* Disable region first */ + out_le32((void *) &(pcip->pmm[0].ma), 0x00000000); + /* PLB starting addr, PCI: 0x80000000 */ + out_le32((void *) &(pcip->pmm[0].la), 0x80000000); + /* PCI start addr, 0x80000000 */ + out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE); + /* 512MB range of PLB to PCI */ + out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000); + /* Enable no pre-fetch, enable region */ + out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff - + (PPC405_PCI_UPPER_MEM - + PPC405_PCI_MEM_BASE)) | 0x01)); + + /* Disable region one */ + out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); + out_le32((void *) &(pcip->pmm[1].la), 0x00000000); + out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000); + out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000); + out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); + out_le32((void *) &(pcip->ptm1ms), 0x00000001); + + /* Disable region two */ + out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); + out_le32((void *) &(pcip->pmm[2].la), 0x00000000); + out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000); + out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000); + out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); + out_le32((void *) &(pcip->ptm2ms), 0x00000000); + out_le32((void *) &(pcip->ptm2la), 0x00000000); + + /* Zero config bars */ + for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { + early_write_config_dword(hose, hose->first_busno, + PCI_FUNC(hose->first_busno), bar, + 0x00000000); + early_read_config_dword(hose, hose->first_busno, + PCI_FUNC(hose->first_busno), bar, + &bar_response); + DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n", + hose->first_busno, PCI_SLOT(hose->first_busno), + PCI_FUNC(hose->first_busno), bar, bar_response); + } + /* end workaround */ + +#ifdef DEBUG + printk("PCI bridge regs after fixup \n"); + for (i = 0; i <= 3; i++) { + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma))); + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la))); + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila))); + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha))); + } + printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms))); + printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la))); + printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms))); + printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la))); + +#endif +#endif +} + +static struct resource magicbox_flash_resource = { + .start = 0xffc00000, + .end = 0xffffffffULL, + .flags = IORESOURCE_MEM, +}; + +static struct mtd_partition magicbox_flash_parts[] = { + { + .name = "linux", + .offset = 0x0, + .size = 0x3c0000, + }, + { + .name = "rootfs", + .offset = 0x100000, + .size = 0x2c0000, + } +}; + +static struct physmap_flash_data magicbox_flash_data = { + .width = 2, + .parts = magicbox_flash_parts, + .nr_parts = ARRAY_SIZE(magicbox_flash_parts), +}; + +static struct platform_device magicbox_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &magicbox_flash_data, + }, + .num_resources = 1, + .resource = &magicbox_flash_resource, +}; + +static int magicbox_setup_flash(void) +{ + platform_device_register(&magicbox_flash_device); + + return 0; +}; + +arch_initcall (magicbox_setup_flash); + +void __init +magicbox_setup_arch(void) +{ + ppc4xx_setup_arch(); + + ibm_ocp_set_emac(0, 1); + + magicbox_early_serial_map(); + + /* Identify the system */ + printk("MagicBox port (C) 2005 Karol Lewandowski \n"); +} + +void __init +magicbox_map_io(void) +{ + ppc4xx_map_io(); +} + +void __init +platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + ppc4xx_init(r3, r4, r5, r6, r7); + + ppc_md.setup_arch = magicbox_setup_arch; + ppc_md.setup_io_mappings = magicbox_map_io; + +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = bubinga_early_serial_map; +#endif +} + diff --git a/target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.h b/target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.h new file mode 100644 index 000000000..50b8d411b --- /dev/null +++ b/target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.h @@ -0,0 +1,46 @@ +/* + * Support for IBM PPC 405EP-based MagicBox board + * + * Heavily based on bubinga.h + * + * + * Author: SAW (IBM), derived from walnut.h. + * Maintained by MontaVista Software + * + * 2003 (c) MontaVista Softare Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifdef __KERNEL__ +#ifndef __MAGICBOX_H__ +#define __MAGICBOX_H__ + +#include +#include + +/* Memory map for the "MagicBox" 405EP evaluation board -- generic 4xx. */ + +/* The UART clock is based off an internal clock - + * define BASE_BAUD based on the internal clock and divider(s). + * Since BASE_BAUD must be a constant, we will initialize it + * using clock/divider values which OpenBIOS initializes + * for typical configurations at various CPU speeds. + * The base baud is calculated as (FWDA / EXT UART DIV / 16) + */ +#define BASE_BAUD 0 + +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 1 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 + +#define PPC4xx_MACHINE_NAME "MagicBox" + +#endif /* __MAGICBOX_H__ */ +#endif /* __KERNEL__ */ diff --git a/target/linux/magicbox/files/drivers/ide/ppc/magicbox_ide.c b/target/linux/magicbox/files/drivers/ide/ppc/magicbox_ide.c new file mode 100644 index 000000000..2e29e8380 --- /dev/null +++ b/target/linux/magicbox/files/drivers/ide/ppc/magicbox_ide.c @@ -0,0 +1,152 @@ +/* Driver for MagicBox 2.0 onboard CompactFlash adapter. + * Written by Wojtek Kaniewski + * + * GNU General Public License. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define UIC0_PR 0xc4 +#define UIC0_TR 0xc5 +#define IRQ 25 + +static int ide_offsets[IDE_NR_PORTS] = {0, 2, 4, 6, 8, 10, 12, 14, -1, -1}; + +static u8 magicbox_ide_inb (unsigned long port) +{ + return (u8) (readw((void __iomem *) port) >> 8) & 255; +} + +static u16 magicbox_ide_inw (unsigned long port) +{ + return (u16) readw((void __iomem *) port); +} + +static void magicbox_ide_insw (unsigned long port, void *addr, u32 count) +{ + u16 *ptr; + + for (ptr = addr; count--; ptr++) + *ptr = readw((void __iomem *) port); +} + +static u32 magicbox_ide_inl (unsigned long port) +{ + return (u32) readl((void __iomem *) port); +} + +static void magicbox_ide_insl (unsigned long port, void *addr, u32 count) +{ + u32 *ptr; + + for (ptr = addr; count--; ptr++) + *ptr = readl((void __iomem *) port); +} + +static void magicbox_ide_outb (u8 value, unsigned long port) +{ + writew(value << 8, (void __iomem *) port); +} + +static void magicbox_ide_outbsync (ide_drive_t *drive, u8 value, unsigned long port) +{ + writew(value << 8, (void __iomem *) port); +} + +static void magicbox_ide_outw (u16 value, unsigned long port) +{ + writew(value, (void __iomem *) port); +} + +static void magicbox_ide_outsw (unsigned long port, void *addr, u32 count) +{ + u16 *ptr; + + for (ptr = addr; count--; ptr++) + writew(*ptr, (void __iomem *) port); +} + +static void magicbox_ide_outl (u32 value, unsigned long port) +{ + writel(value, (void __iomem *) port); +} + +static void magicbox_ide_outsl (unsigned long port, void *addr, u32 count) +{ + u32 *ptr; + + for (ptr = addr; count--; ptr++) + writel(*ptr, (void __iomem *) port); +} + + +static void __init ide_magicbox_register(unsigned long addr, + unsigned long caddr, int irq) +{ + hw_regs_t hw; + ide_hwif_t *hwif; + + memset(&hw, 0, sizeof(hw)); + ide_setup_ports(&hw, addr, ide_offsets, caddr + 12, 0, NULL,irq); + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) + if (ide_register_hw(&hw, &hwif) != -1) +#else + if (ide_register_hw(&hw, 1, &hwif) != -1) +#endif + { + printk(KERN_NOTICE "magicbox-ide: Registered IDE-CF driver\n"); + hwif->mmio = 2; + hwif->drives[0].unmask = 1; + hwif->OUTB = magicbox_ide_outb; + hwif->OUTBSYNC = magicbox_ide_outbsync; + hwif->OUTW = magicbox_ide_outw; + hwif->OUTSW = magicbox_ide_outsw; + hwif->OUTSL = magicbox_ide_outsl; + hwif->INB = magicbox_ide_inb; + hwif->INW = magicbox_ide_inw; + hwif->INSW = magicbox_ide_insw; + hwif->INSL = magicbox_ide_insl; + } +} + +void __init ide_magicbox_init(void) +{ + volatile u16 *addr; + volatile u16 *caddr; + + /* Turn on PerWE instead of PCIsomething */ + mtdcr(DCRN_CPC0_PCI_BASE, mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27)); + + /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */ + mtdcr(DCRN_EBC_BASE, 1); + mtdcr(DCRN_EBC_BASE + 1, 0xff11a000); + mtdcr(DCRN_EBC_BASE, 0x11); + mtdcr(DCRN_EBC_BASE + 1, 0x080bd800); + + /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */ + mtdcr(DCRN_EBC_BASE, 2); + mtdcr(DCRN_EBC_BASE + 1, 0xff21a000); + mtdcr(DCRN_EBC_BASE, 0x12); + mtdcr(DCRN_EBC_BASE + 1, 0x080bd800); + + /* Remap physical address space */ + addr = ioremap_nocache(0xff100000, 4096); + caddr = ioremap_nocache(0xff200000, 4096); + + /* Set interrupt to low-to-high-edge-triggered */ + mtdcr(UIC0_TR, mfdcr(UIC0_TR) & ~(0x80000000L >> IRQ)); + mtdcr(UIC0_PR, mfdcr(UIC0_PR) | (0x80000000L >> IRQ)); + + ide_magicbox_register((unsigned long)addr, (unsigned long)caddr, IRQ); +} + -- cgit v1.2.3