From 0416a581092e60644617c772dad382830bb2a486 Mon Sep 17 00:00:00 2001 From: kaloz Date: Thu, 15 Dec 2005 09:05:57 +0000 Subject: add my 2.6.15-rc5 port (yay) with devfs. The PCI subsystem is broken on Broadcom boards, we are working on it. Also upgrade iptables to 1.3.4 git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@2683 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../patches/generic/101-mppe-mppc-1.3.patch | 1559 -------------------- 1 file changed, 1559 deletions(-) delete mode 100644 target/linux/linux-2.6/patches/generic/101-mppe-mppc-1.3.patch (limited to 'target/linux/linux-2.6/patches/generic/101-mppe-mppc-1.3.patch') diff --git a/target/linux/linux-2.6/patches/generic/101-mppe-mppc-1.3.patch b/target/linux/linux-2.6/patches/generic/101-mppe-mppc-1.3.patch deleted file mode 100644 index aa430252c..000000000 --- a/target/linux/linux-2.6/patches/generic/101-mppe-mppc-1.3.patch +++ /dev/null @@ -1,1559 +0,0 @@ -diff -ruN linux-2.6.12.orig/drivers/net/Kconfig linux-2.6.12/drivers/net/Kconfig ---- linux-2.6.12.orig/drivers/net/Kconfig 2005-06-28 19:57:16.000000000 +0200 -+++ linux-2.6.12/drivers/net/Kconfig 2005-06-28 20:07:01.000000000 +0200 -@@ -2417,6 +2417,32 @@ - module; it is called bsd_comp and will show up in the directory - modules once you have said "make modules". If unsure, say N. - -+config PPP_MPPE_MPPC -+ tristate "Microsoft PPP compression/encryption (MPPC/MPPE)" -+ depends on PPP -+ select CRYPTO_SHA1 -+ select CRYPTO_ARC4 -+ ---help--- -+ Support for the Microsoft Point-To-Point Compression (RFC2118) and -+ Microsoft Point-To-Point Encryption (RFC3078). These protocols are -+ supported by Microsoft Windows and wide range of "hardware" access -+ servers. MPPE is common protocol in Virtual Private Networks. According -+ to RFC3078, MPPE supports 40, 56 and 128-bit key lengths. Depending on -+ PPP daemon configuration on both ends of the link, following scenarios -+ are possible: -+ - only compression (MPPC) is used, -+ - only encryption (MPPE) is used, -+ - compression and encryption (MPPC+MPPE) are used. -+ -+ Please note that Hi/Fn (http://www.hifn.com) holds patent on MPPC so -+ you should check if this patent is valid in your country in order to -+ avoid legal problems. -+ -+ For more information please visit http://free.polbox.pl/h/hs001 -+ -+ To compile this driver as a module, choose M here. The module will -+ be called ppp_mppe_mppc.ko. -+ - config PPPOE - tristate "PPP over Ethernet (EXPERIMENTAL)" - depends on EXPERIMENTAL && PPP -diff -ruN linux-2.6.12.orig/drivers/net/Makefile linux-2.6.12/drivers/net/Makefile ---- linux-2.6.12.orig/drivers/net/Makefile 2005-06-28 19:57:16.000000000 +0200 -+++ linux-2.6.12/drivers/net/Makefile 2005-06-28 20:07:01.000000000 +0200 -@@ -105,6 +105,7 @@ - obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o - obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o - obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o -+obj-$(CONFIG_PPP_MPPE_MPPC) += ppp_mppe_mppc.o - obj-$(CONFIG_PPPOE) += pppox.o pppoe.o - - obj-$(CONFIG_SLIP) += slip.o -diff -ruN linux-2.6.12.orig/drivers/net/ppp_generic.c linux-2.6.12/drivers/net/ppp_generic.c ---- linux-2.6.12.orig/drivers/net/ppp_generic.c 2005-06-28 19:57:20.000000000 +0200 -+++ linux-2.6.12/drivers/net/ppp_generic.c 2005-06-28 20:07:01.000000000 +0200 -@@ -19,7 +19,7 @@ - * PPP driver, written by Michael Callahan and Al Longyear, and - * subsequently hacked by Paul Mackerras. - * -- * ==FILEVERSION 20041108== -+ * ==FILEVERSION 20050110== - */ - - #include -@@ -105,6 +105,7 @@ - spinlock_t rlock; /* lock for receive side 58 */ - spinlock_t wlock; /* lock for transmit side 5c */ - int mru; /* max receive unit 60 */ -+ int mru_alloc; /* MAX(1500,MRU) for dev_alloc_skb() */ - unsigned int flags; /* control bits 64 */ - unsigned int xstate; /* transmit state bits 68 */ - unsigned int rstate; /* receive state bits 6c */ -@@ -632,7 +633,9 @@ - case PPPIOCSMRU: - if (get_user(val, p)) - break; -- ppp->mru = val; -+ ppp->mru_alloc = ppp->mru = val; -+ if (ppp->mru_alloc < PPP_MRU) -+ ppp->mru_alloc = PPP_MRU; /* increase for broken peers */ - err = 0; - break; - -@@ -1107,14 +1110,37 @@ - case PPP_CCP: - /* peek at outbound CCP frames */ - ppp_ccp_peek(ppp, skb, 0); -+ /* -+ * When LZS or MPPE/MPPC has been negotiated we don't send -+ * CCP_RESETACK after receiving CCP_RESETREQ; in fact pppd -+ * sends such a packet but we silently discard it here -+ */ -+ if (CCP_CODE(skb->data+2) == CCP_RESETACK -+ && (ppp->xcomp->compress_proto == CI_MPPE -+ || ppp->xcomp->compress_proto == CI_LZS)) { -+ --ppp->stats.tx_packets; -+ ppp->stats.tx_bytes -= skb->len - 2; -+ kfree_skb(skb); -+ return; -+ } - break; - } - - /* try to do packet compression */ - if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state != 0 - && proto != PPP_LCP && proto != PPP_CCP) { -- new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len, -- GFP_ATOMIC); -+ int comp_ovhd = 0; -+ /* -+ * because of possible data expansion when MPPC or LZS -+ * is used, allocate compressor's buffer 12.5% bigger -+ * than MTU -+ */ -+ if (ppp->xcomp->compress_proto == CI_MPPE) -+ comp_ovhd = ((ppp->dev->mtu * 9) / 8) + 1 + MPPE_OVHD; -+ else if (ppp->xcomp->compress_proto == CI_LZS) -+ comp_ovhd = ((ppp->dev->mtu * 9) / 8) + 1 + LZS_OVHD; -+ new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len -+ + comp_ovhd, GFP_ATOMIC); - if (new_skb == 0) { - printk(KERN_ERR "PPP: no memory (comp pkt)\n"); - goto drop; -@@ -1132,9 +1158,21 @@ - skb = new_skb; - skb_put(skb, len); - skb_pull(skb, 2); /* pull off A/C bytes */ -- } else { -+ } else if (len == 0) { - /* didn't compress, or CCP not up yet */ - kfree_skb(new_skb); -+ } else { -+ /* -+ * (len < 0) -+ * MPPE requires that we do not send unencrypted -+ * frames. The compressor will return -1 if we -+ * should drop the frame. We cannot simply test -+ * the compress_proto because MPPE and MPPC share -+ * the same number. -+ */ -+ printk(KERN_ERR "ppp: compressor dropped pkt\n"); -+ kfree_skb(new_skb); -+ goto drop; - } - } - -@@ -1640,14 +1678,15 @@ - goto err; - - if (proto == PPP_COMP) { -- ns = dev_alloc_skb(ppp->mru + PPP_HDRLEN); -+ ns = dev_alloc_skb(ppp->mru_alloc + PPP_HDRLEN); - if (ns == 0) { - printk(KERN_ERR "ppp_decompress_frame: no memory\n"); - goto err; - } - /* the decompressor still expects the A/C bytes in the hdr */ - len = ppp->rcomp->decompress(ppp->rc_state, skb->data - 2, -- skb->len + 2, ns->data, ppp->mru + PPP_HDRLEN); -+ skb->len + 2, ns->data, -+ ppp->mru_alloc + PPP_HDRLEN); - if (len < 0) { - /* Pass the compressed frame to pppd as an - error indication. */ -@@ -1673,7 +1712,14 @@ - return skb; - - err: -- ppp->rstate |= SC_DC_ERROR; -+ if (ppp->rcomp->compress_proto != CI_MPPE -+ && ppp->rcomp->compress_proto != CI_LZS) { -+ /* -+ * If decompression protocol isn't MPPE/MPPC or LZS, we set -+ * SC_DC_ERROR flag and wait for CCP_RESETACK -+ */ -+ ppp->rstate |= SC_DC_ERROR; -+ } - ppp_receive_error(ppp); - return skb; - } -@@ -2349,6 +2395,7 @@ - memset(ppp, 0, sizeof(struct ppp)); - - ppp->mru = PPP_MRU; -+ ppp->mru_alloc = PPP_MRU; - init_ppp_file(&ppp->file, INTERFACE); - ppp->file.hdrlen = PPP_HDRLEN - 2; /* don't count proto bytes */ - for (i = 0; i < NUM_NP; ++i) -diff -ruN linux-2.6.12.orig/drivers/net/ppp_mppe_mppc.c linux-2.6.12/drivers/net/ppp_mppe_mppc.c ---- linux-2.6.12.orig/drivers/net/ppp_mppe_mppc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12/drivers/net/ppp_mppe_mppc.c 2005-06-28 20:07:01.000000000 +0200 -@@ -0,0 +1,1299 @@ -+/* -+ * ppp_mppe_mppc.c - MPPC/MPPE "compressor/decompressor" module. -+ * -+ * Copyright (c) 1994 Árpád Magosányi -+ * Copyright (c) 1999 Tim Hockin, Cobalt Networks Inc. -+ * Copyright (c) 2002-2004 Jan Dubiec -+ * -+ * Permission to use, copy, modify, and distribute this software and its -+ * documentation is hereby granted, provided that the above copyright -+ * notice appears in all copies. This software is provided without any -+ * warranty, express or implied. -+ * -+ * The code is based on MPPE kernel module written by Árpád Magosányi and -+ * Tim Hockin which can be found on http://planetmirror.com/pub/mppe/. -+ * I have added MPPC and 56 bit session keys support in MPPE. -+ * -+ * WARNING! Although this is open source code, its usage in some countries -+ * (in particular in the USA) may violate Stac Inc. patent for MPPC. -+ * -+ * ==FILEVERSION 20041123== -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+/* -+ * State for a mppc/mppe "(de)compressor". -+ */ -+struct ppp_mppe_state { -+ struct crypto_tfm *arc4_tfm; -+ struct crypto_tfm *sha1_tfm; -+ u8 *sha1_digest; -+ u8 master_key[MPPE_MAX_KEY_LEN]; -+ u8 session_key[MPPE_MAX_KEY_LEN]; -+ u8 mppc; /* do we use compression (MPPC)? */ -+ u8 mppe; /* do we use encryption (MPPE)? */ -+ u8 keylen; /* key length in bytes */ -+ u8 bitkeylen; /* key length in bits */ -+ u16 ccount; /* coherency counter */ -+ u16 bits; /* MPPC/MPPE control bits */ -+ u8 stateless; /* do we use stateless mode? */ -+ u8 nextflushed; /* set A bit in the next outgoing packet; -+ used only by compressor*/ -+ u8 flushexpected; /* drop packets until A bit is received; -+ used only by decompressor*/ -+ u8 *hist; /* MPPC history */ -+ u16 *hash; /* Hash table; used only by compressor */ -+ u16 histptr; /* history "cursor" */ -+ int unit; -+ int debug; -+ int mru; -+ struct compstat stats; -+}; -+ -+#define MPPE_HIST_LEN 8192 /* MPPC history size */ -+#define MPPE_MAX_CCOUNT 0x0FFF /* max. coherency counter value */ -+ -+#define MPPE_BIT_FLUSHED 0x80 /* bit A */ -+#define MPPE_BIT_RESET 0x40 /* bit B */ -+#define MPPE_BIT_COMP 0x20 /* bit C */ -+#define MPPE_BIT_ENCRYPTED 0x10 /* bit D */ -+ -+#define MPPE_SALT0 0xD1 /* values used in MPPE key derivation */ -+#define MPPE_SALT1 0x26 /* according to RFC3079 */ -+#define MPPE_SALT2 0x9E -+ -+#define MPPE_CCOUNT(x) ((((x)[4] & 0x0f) << 8) + (x)[5]) -+#define MPPE_BITS(x) ((x)[4] & 0xf0) -+#define MPPE_CTRLHI(x) ((((x)->ccount & 0xf00)>>8)|((x)->bits)) -+#define MPPE_CTRLLO(x) ((x)->ccount & 0xff) -+ -+/* -+ * Kernel Crypto API needs its arguments to be in kmalloc'd memory, not in the -+ * module static data area. That means sha_pad needs to be kmalloc'd. It is done -+ * in mppe_module_init(). This has been pointed out on 30th July 2004 by Oleg -+ * Makarenko on pptpclient-devel mailing list. -+ */ -+#define SHA1_PAD_SIZE 40 -+struct sha_pad { -+ unsigned char sha_pad1[SHA1_PAD_SIZE]; -+ unsigned char sha_pad2[SHA1_PAD_SIZE]; -+}; -+static struct sha_pad *sha_pad; -+ -+static inline void -+setup_sg(struct scatterlist *sg, const void *address, unsigned int length) -+{ -+ sg[0].page = virt_to_page(address); -+ sg[0].offset = offset_in_page(address); -+ sg[0].length = length; -+} -+ -+static inline void -+arc4_setkey(struct ppp_mppe_state *state, const unsigned char *key, -+ const unsigned int keylen) -+{ -+ crypto_cipher_setkey(state->arc4_tfm, key, keylen); -+} -+ -+static inline void -+arc4_encrypt(struct ppp_mppe_state *state, const unsigned char *in, -+ const unsigned int len, unsigned char *out) -+{ -+ struct scatterlist sgin[4], sgout[4]; -+ -+ setup_sg(sgin, in, len); -+ setup_sg(sgout, out, len); -+ crypto_cipher_encrypt(state->arc4_tfm, sgout, sgin, len); -+} -+ -+#define arc4_decrypt arc4_encrypt -+ -+/* -+ * Key Derivation, from RFC 3078, RFC 3079. -+ * Equivalent to Get_Key() for MS-CHAP as described in RFC 3079. -+ */ -+static void -+get_new_key_from_sha(struct ppp_mppe_state *state, unsigned char *interim_key) -+{ -+ struct scatterlist sg[4]; -+ -+ setup_sg(&sg[0], state->master_key, state->keylen); -+ setup_sg(&sg[1], sha_pad->sha_pad1, sizeof(sha_pad->sha_pad1)); -+ setup_sg(&sg[2], state->session_key, state->keylen); -+ setup_sg(&sg[3], sha_pad->sha_pad2, sizeof(sha_pad->sha_pad2)); -+ -+ crypto_digest_digest (state->sha1_tfm, sg, 4, state->sha1_digest); -+ -+ memcpy(interim_key, state->sha1_digest, state->keylen); -+} -+ -+static void -+mppe_change_key(struct ppp_mppe_state *state, int initialize) -+{ -+ unsigned char interim_key[MPPE_MAX_KEY_LEN]; -+ -+ get_new_key_from_sha(state, interim_key); -+ if (initialize) { -+ memcpy(state->session_key, interim_key, state->keylen); -+ } else { -+ arc4_setkey(state, interim_key, state->keylen); -+ arc4_encrypt(state, interim_key, state->keylen, state->session_key); -+ } -+ if (state->keylen == 8) { -+ if (state->bitkeylen == 40) { -+ state->session_key[0] = MPPE_SALT0; -+ state->session_key[1] = MPPE_SALT1; -+ state->session_key[2] = MPPE_SALT2; -+ } else { -+ state->session_key[0] = MPPE_SALT0; -+ } -+ } -+ arc4_setkey(state, state->session_key, state->keylen); -+} -+ -+/* increase 12-bit coherency counter */ -+static inline void -+mppe_increase_ccount(struct ppp_mppe_state *state) -+{ -+ state->ccount = (state->ccount + 1) & MPPE_MAX_CCOUNT; -+ if (state->mppe) { -+ if (state->stateless) { -+ mppe_change_key(state, 0); -+ state->nextflushed = 1; -+ } else { -+ if ((state->ccount & 0xff) == 0xff) { -+ mppe_change_key(state, 0); -+ } -+ } -+ } -+} -+ -+/* allocate space for a MPPE/MPPC (de)compressor. */ -+/* comp != 0 -> init compressor */ -+/* comp = 0 -> init decompressor */ -+static void * -+mppe_alloc(unsigned char *options, int opt_len, int comp) -+{ -+ struct ppp_mppe_state *state; -+ unsigned int digestsize; -+ u8* fname; -+ -+ fname = comp ? "mppe_comp_alloc" : "mppe_decomp_alloc"; -+ -+ /* -+ * Hack warning - additionally to the standard MPPC/MPPE configuration -+ * options, pppd passes to the (de)copressor 8 or 16 byte session key. -+ * Therefore options[1] contains MPPC/MPPE configuration option length -+ * (CILEN_MPPE = 6), but the real options length, depending on the key -+ * length, is 6+8 or 6+16. -+ */ -+ if (opt_len < CILEN_MPPE) { -+ printk(KERN_WARNING "%s: wrong options length: %u\n", fname, opt_len); -+ return NULL; -+ } -+ -+ if (options[0] != CI_MPPE || options[1] != CILEN_MPPE || -+ (options[2] & ~MPPE_STATELESS) != 0 || -+ options[3] != 0 || options[4] != 0 || -+ (options[5] & ~(MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) != 0 || -+ (options[5] & (MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) == 0) { -+ printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, " -+ "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname, options[0], -+ options[1], options[2], options[3], options[4], options[5]); -+ return NULL; -+ } -+ -+ state = (struct ppp_mppe_state *)kmalloc(sizeof(*state), GFP_KERNEL); -+ if (state == NULL) { -+ printk(KERN_ERR "%s: cannot allocate space for %scompressor\n", fname, -+ comp ? "" : "de"); -+ return NULL; -+ } -+ memset(state, 0, sizeof(struct ppp_mppe_state)); -+ -+ state->mppc = options[5] & MPPE_MPPC; /* Do we use MPPC? */ -+ state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT | -+ MPPE_40BIT); /* Do we use MPPE? */ -+ -+ if (state->mppc) { -+ /* allocate MPPC history */ -+ state->hist = (u8*)vmalloc(2*MPPE_HIST_LEN*sizeof(u8)); -+ if (state->hist == NULL) { -+ kfree(state); -+ printk(KERN_ERR "%s: cannot allocate space for MPPC history\n", -+ fname); -+ return NULL; -+ } -+ -+ /* allocate hashtable for MPPC compressor */ -+ if (comp) { -+ state->hash = (u16*)vmalloc(MPPE_HIST_LEN*sizeof(u16)); -+ if (state->hash == NULL) { -+ vfree(state->hist); -+ kfree(state); -+ printk(KERN_ERR "%s: cannot allocate space for MPPC history\n", -+ fname); -+ return NULL; -+ } -+ } -+ } -+ -+ if (state->mppe) { /* specific for MPPE */ -+ /* Load ARC4 algorithm */ -+ state->arc4_tfm = crypto_alloc_tfm("arc4", 0); -+ if (state->arc4_tfm == NULL) { -+ if (state->mppc) { -+ vfree(state->hash); -+ if (comp) -+ vfree(state->hist); -+ } -+ kfree(state); -+ printk(KERN_ERR "%s: cannot load ARC4 module\n", fname); -+ return NULL; -+ } -+ -+ /* Load SHA1 algorithm */ -+ state->sha1_tfm = crypto_alloc_tfm("sha1", 0); -+ if (state->sha1_tfm == NULL) { -+ crypto_free_tfm(state->arc4_tfm); -+ if (state->mppc) { -+ vfree(state->hash); -+ if (comp) -+ vfree(state->hist); -+ } -+ kfree(state); -+ printk(KERN_ERR "%s: cannot load SHA1 module\n", fname); -+ return NULL; -+ } -+ -+ digestsize = crypto_tfm_alg_digestsize(state->sha1_tfm); -+ if (digestsize < MPPE_MAX_KEY_LEN) { -+ crypto_free_tfm(state->sha1_tfm); -+ crypto_free_tfm(state->arc4_tfm); -+ if (state->mppc) { -+ vfree(state->hash); -+ if (comp) -+ vfree(state->hist); -+ } -+ kfree(state); -+ printk(KERN_ERR "%s: CryptoAPI SHA1 digest size too small\n", fname); -+ } -+ -+ state->sha1_digest = kmalloc(digestsize, GFP_KERNEL); -+ if (!state->sha1_digest) { -+ crypto_free_tfm(state->sha1_tfm); -+ crypto_free_tfm(state->arc4_tfm); -+ if (state->mppc) { -+ vfree(state->hash); -+ if (comp) -+ vfree(state->hist); -+ } -+ kfree(state); -+ printk(KERN_ERR "%s: cannot allocate space for SHA1 digest\n", fname); -+ } -+ -+ memcpy(state->master_key, options+CILEN_MPPE, MPPE_MAX_KEY_LEN); -+ memcpy(state->session_key, state->master_key, MPPE_MAX_KEY_LEN); -+ /* initial key generation is done in mppe_init() */ -+ } -+ -+ return (void *) state; -+} -+ -+static void * -+mppe_comp_alloc(unsigned char *options, int opt_len) -+{ -+ return mppe_alloc(options, opt_len, 1); -+} -+ -+static void * -+mppe_decomp_alloc(unsigned char *options, int opt_len) -+{ -+ return mppe_alloc(options, opt_len, 0); -+} -+ -+/* cleanup the (de)compressor */ -+static void -+mppe_comp_free(void *arg) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg; -+ -+ if (state != NULL) { -+ if (state->mppe) { -+ if (state->sha1_digest != NULL) -+ kfree(state->sha1_digest); -+ if (state->sha1_tfm != NULL) -+ crypto_free_tfm(state->sha1_tfm); -+ if (state->arc4_tfm != NULL) -+ crypto_free_tfm(state->arc4_tfm); -+ } -+ if (state->hist != NULL) -+ vfree(state->hist); -+ if (state->hash != NULL) -+ vfree(state->hash); -+ kfree(state); -+ } -+} -+ -+/* init MPPC/MPPE (de)compresor */ -+/* comp != 0 -> init compressor */ -+/* comp = 0 -> init decompressor */ -+static int -+mppe_init(void *arg, unsigned char *options, int opt_len, int unit, -+ int hdrlen, int mru, int debug, int comp) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg; -+ u8* fname; -+ -+ fname = comp ? "mppe_comp_init" : "mppe_decomp_init"; -+ -+ if (opt_len < CILEN_MPPE) { -+ if (debug) -+ printk(KERN_WARNING "%s: wrong options length: %u\n", -+ fname, opt_len); -+ return 0; -+ } -+ -+ if (options[0] != CI_MPPE || options[1] != CILEN_MPPE || -+ (options[2] & ~MPPE_STATELESS) != 0 || -+ options[3] != 0 || options[4] != 0 || -+ (options[5] & ~(MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) != 0 || -+ (options[5] & (MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) == 0) { -+ if (debug) -+ printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, " -+ "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname, -+ options[0], options[1], options[2], options[3], options[4], -+ options[5]); -+ return 0; -+ } -+ -+ if ((options[5] & ~MPPE_MPPC) != MPPE_128BIT && -+ (options[5] & ~MPPE_MPPC) != MPPE_56BIT && -+ (options[5] & ~MPPE_MPPC) != MPPE_40BIT && -+ (options[5] & MPPE_MPPC) != MPPE_MPPC) { -+ if (debug) -+ printk(KERN_WARNING "%s: don't know what to do: o[5]=%02x\n", -+ fname, options[5]); -+ return 0; -+ } -+ -+ state->mppc = options[5] & MPPE_MPPC; /* Do we use MPPC? */ -+ state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT | -+ MPPE_40BIT); /* Do we use MPPE? */ -+ state->stateless = options[2] & MPPE_STATELESS; /* Do we use stateless mode? */ -+ -+ switch (state->mppe) { -+ case MPPE_40BIT: /* 40 bit key */ -+ state->keylen = 8; -+ state->bitkeylen = 40; -+ break; -+ case MPPE_56BIT: /* 56 bit key */ -+ state->keylen = 8; -+ state->bitkeylen = 56; -+ break; -+ case MPPE_128BIT: /* 128 bit key */ -+ state->keylen = 16; -+ state->bitkeylen = 128; -+ break; -+ default: -+ state->keylen = 0; -+ state->bitkeylen = 0; -+ } -+ -+ state->ccount = MPPE_MAX_CCOUNT; -+ state->bits = 0; -+ state->unit = unit; -+ state->debug = debug; -+ state->histptr = MPPE_HIST_LEN; -+ if (state->mppc) { /* reset history if MPPC was negotiated */ -+ memset(state->hist, 0, 2*MPPE_HIST_LEN*sizeof(u8)); -+ } -+ -+ if (state->mppe) { /* generate initial session keys */ -+ mppe_change_key(state, 1); -+ } -+ -+ if (comp) { /* specific for compressor */ -+ state->nextflushed = 1; -+ } else { /* specific for decompressor */ -+ state->mru = mru; -+ state->flushexpected = 1; -+ } -+ -+ return 1; -+} -+ -+static int -+mppe_comp_init(void *arg, unsigned char *options, int opt_len, int unit, -+ int hdrlen, int debug) -+{ -+ return mppe_init(arg, options, opt_len, unit, hdrlen, 0, debug, 1); -+} -+ -+ -+static int -+mppe_decomp_init(void *arg, unsigned char *options, int opt_len, int unit, -+ int hdrlen, int mru, int debug) -+{ -+ return mppe_init(arg, options, opt_len, unit, hdrlen, mru, debug, 0); -+} -+ -+static void -+mppe_comp_reset(void *arg) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg; -+ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: resetting MPPC/MPPE compressor\n", -+ __FUNCTION__, state->unit); -+ -+ state->nextflushed = 1; -+ if (state->mppe) -+ arc4_setkey(state, state->session_key, state->keylen); -+} -+ -+static void -+mppe_decomp_reset(void *arg) -+{ -+ /* When MPPC/MPPE is in use, we shouldn't receive any CCP Reset-Ack. -+ But when we receive such a packet, we just ignore it. */ -+ return; -+} -+ -+static void -+mppe_stats(void *arg, struct compstat *stats) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg; -+ -+ *stats = state->stats; -+} -+ -+/***************************/ -+/**** Compression stuff ****/ -+/***************************/ -+/* inserts 1 to 8 bits into the output buffer */ -+static inline void putbits8(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l) -+{ -+ buf += *i; -+ if (*l >= n) { -+ *l = (*l) - n; -+ val <<= *l; -+ *buf = *buf | (val & 0xff); -+ if (*l == 0) { -+ *l = 8; -+ (*i)++; -+ *(++buf) = 0; -+ } -+ } else { -+ (*i)++; -+ *l = 8 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 8) & 0xff); -+ *(++buf) = val & 0xff; -+ } -+} -+ -+/* inserts 9 to 16 bits into the output buffer */ -+static inline void putbits16(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l) -+{ -+ buf += *i; -+ if (*l >= n - 8) { -+ (*i)++; -+ *l = 8 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 8) & 0xff); -+ *(++buf) = val & 0xff; -+ if (*l == 0) { -+ *l = 8; -+ (*i)++; -+ *(++buf) = 0; -+ } -+ } else { -+ (*i)++; (*i)++; -+ *l = 16 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 16) & 0xff); -+ *(++buf) = (val >> 8) & 0xff; -+ *(++buf) = val & 0xff; -+ } -+} -+ -+/* inserts 17 to 24 bits into the output buffer */ -+static inline void putbits24(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l) -+{ -+ buf += *i; -+ if (*l >= n - 16) { -+ (*i)++; (*i)++; -+ *l = 16 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 16) & 0xff); -+ *(++buf) = (val >> 8) & 0xff; -+ *(++buf) = val & 0xff; -+ if (*l == 0) { -+ *l = 8; -+ (*i)++; -+ *(++buf) = 0; -+ } -+ } else { -+ (*i)++; (*i)++; (*i)++; -+ *l = 24 - n + (*l); -+ val <<= *l; -+ *buf = *buf | ((val >> 24) & 0xff); -+ *(++buf) = (val >> 16) & 0xff; -+ *(++buf) = (val >> 8) & 0xff; -+ *(++buf) = val & 0xff; -+ } -+} -+ -+static int -+mppc_compress(struct ppp_mppe_state *state, unsigned char *ibuf, -+ unsigned char *obuf, int isize, int osize) -+{ -+ u32 olen, off, len, idx, i, l; -+ u8 *hist, *sbuf, *p, *q, *r, *s; -+ -+ /* -+ At this point, to avoid possible buffer overflow caused by packet -+ expansion during/after compression, we should make sure that -+ osize >= (((isize*9)/8)+1)+2, but we don't do that because in -+ ppp_generic.c we simply allocate bigger obuf. -+ -+ Maximum MPPC packet expansion is 12.5%. This is the worst case when -+ all octets in the input buffer are >= 0x80 and we cannot find any -+ repeated tokens. Additionally we have to reserve 2 bytes for MPPE/MPPC -+ status bits and coherency counter. -+ */ -+ -+ hist = state->hist + MPPE_HIST_LEN; -+ /* check if there is enough room at the end of the history */ -+ if (state->histptr + isize >= 2*MPPE_HIST_LEN) { -+ state->bits |= MPPE_BIT_RESET; -+ state->histptr = MPPE_HIST_LEN; -+ memcpy(state->hist, hist, MPPE_HIST_LEN); -+ } -+ /* add packet to the history; isize must be <= MPPE_HIST_LEN */ -+ sbuf = state->hist + state->histptr; -+ memcpy(sbuf, ibuf, isize); -+ state->histptr += isize; -+ -+ /* compress data */ -+ r = sbuf + isize; -+ *obuf = olen = i = 0; -+ l = 8; -+ while (i < isize - 2) { -+ s = q = sbuf + i; -+ idx = ((40543*((((s[0]<<4)^s[1])<<4)^s[2]))>>4) & 0x1fff; -+ p = hist + state->hash[idx]; -+ state->hash[idx] = (u16) (s - hist); -+ off = s - p; -+ if (off > MPPE_HIST_LEN - 1 || off < 1 || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++) { -+ /* no match found; encode literal byte */ -+ if (ibuf[i] < 0x80) { /* literal byte < 0x80 */ -+ putbits8(obuf, (u32) ibuf[i], 8, &olen, &l); -+ } else { /* literal byte >= 0x80 */ -+ putbits16(obuf, (u32) (0x100|(ibuf[i]&0x7f)), 9, &olen, &l); -+ } -+ ++i; -+ continue; -+ } -+ if (r - q >= 64) { -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || -+ *p++ != *s++; -+ if (s - q == 64) { -+ p--; s--; -+ while((*p++ == *s++) && (s < r) && (p < q)); -+ } -+ } else { -+ while((*p++ == *s++) && (s < r) && (p < q)); -+ } -+ len = s - q - 1; -+ i += len; -+ -+ /* at least 3 character match found; code data */ -+ /* encode offset */ -+ if (off < 64) { /* 10-bit offset; 0 <= offset < 64 */ -+ putbits16(obuf, 0x3c0|off, 10, &olen, &l); -+ } else if (off < 320) { /* 12-bit offset; 64 <= offset < 320 */ -+ putbits16(obuf, 0xe00|(off-64), 12, &olen, &l); -+ } else if (off < 8192) { /* 16-bit offset; 320 <= offset < 8192 */ -+ putbits16(obuf, 0xc000|(off-320), 16, &olen, &l); -+ } else { -+ /* This shouldn't happen; we return 0 what means "packet expands", -+ and we send packet uncompressed. */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: wrong offset value: %d\n", -+ __FUNCTION__, state->unit, off); -+ return 0; -+ } -+ /* encode length of match */ -+ if (len < 4) { /* length = 3 */ -+ putbits8(obuf, 0, 1, &olen, &l); -+ } else if (len < 8) { /* 4 <= length < 8 */ -+ putbits8(obuf, 0x08|(len&0x03), 4, &olen, &l); -+ } else if (len < 16) { /* 8 <= length < 16 */ -+ putbits8(obuf, 0x30|(len&0x07), 6, &olen, &l); -+ } else if (len < 32) { /* 16 <= length < 32 */ -+ putbits8(obuf, 0xe0|(len&0x0f), 8, &olen, &l); -+ } else if (len < 64) { /* 32 <= length < 64 */ -+ putbits16(obuf, 0x3c0|(len&0x1f), 10, &olen, &l); -+ } else if (len < 128) { /* 64 <= length < 128 */ -+ putbits16(obuf, 0xf80|(len&0x3f), 12, &olen, &l); -+ } else if (len < 256) { /* 128 <= length < 256 */ -+ putbits16(obuf, 0x3f00|(len&0x7f), 14, &olen, &l); -+ } else if (len < 512) { /* 256 <= length < 512 */ -+ putbits16(obuf, 0xfe00|(len&0xff), 16, &olen, &l); -+ } else if (len < 1024) { /* 512 <= length < 1024 */ -+ putbits24(obuf, 0x3fc00|(len&0x1ff), 18, &olen, &l); -+ } else if (len < 2048) { /* 1024 <= length < 2048 */ -+ putbits24(obuf, 0xff800|(len&0x3ff), 20, &olen, &l); -+ } else if (len < 4096) { /* 2048 <= length < 4096 */ -+ putbits24(obuf, 0x3ff000|(len&0x7ff), 22, &olen, &l); -+ } else if (len < 8192) { /* 4096 <= length < 8192 */ -+ putbits24(obuf, 0xffe000|(len&0xfff), 24, &olen, &l); -+ } else { -+ /* This shouldn't happen; we return 0 what means "packet expands", -+ and send packet uncompressed. */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: wrong length of match value: %d\n", -+ __FUNCTION__, state->unit, len); -+ return 0; -+ } -+ } -+ -+ /* Add remaining octets to the output */ -+ while(isize - i > 0) { -+ if (ibuf[i] < 0x80) { /* literal byte < 0x80 */ -+ putbits8(obuf, (u32) ibuf[i++], 8, &olen, &l); -+ } else { /* literal byte >= 0x80 */ -+ putbits16(obuf, (u32) (0x100|(ibuf[i++]&0x7f)), 9, &olen, &l); -+ } -+ } -+ /* Reset unused bits of the last output octet */ -+ if ((l != 0) && (l != 8)) { -+ putbits8(obuf, 0, l, &olen, &l); -+ } -+ -+ return (int) olen; -+} -+ -+int -+mppe_compress(void *arg, unsigned char *ibuf, unsigned char *obuf, -+ int isize, int osize) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg; -+ int proto, olen, complen, off; -+ unsigned char *wptr; -+ -+ /* Check that the protocol is in the range we handle. */ -+ proto = PPP_PROTOCOL(ibuf); -+ if (proto < 0x0021 || proto > 0x00fa) -+ return 0; -+ -+ wptr = obuf; -+ /* Copy over the PPP header */ -+ wptr[0] = PPP_ADDRESS(ibuf); -+ wptr[1] = PPP_CONTROL(ibuf); -+ wptr[2] = PPP_COMP >> 8; -+ wptr[3] = PPP_COMP; -+ wptr += PPP_HDRLEN + (MPPE_OVHD / 2); /* Leave two octets for MPPE/MPPC bits */ -+ -+ /* -+ * In ver. 0.99 protocol field was compressed. Deflate and BSD compress -+ * do PFC before actual compression, RCF2118 and RFC3078 are not precise -+ * on this topic so I decided to do PFC. Unfortunately this change caused -+ * incompatibility with older/other MPPE/MPPC modules. I have received -+ * a lot of complaints from unexperienced users so I have decided to revert -+ * to previous state, i.e. the protocol field is sent uncompressed now. -+ * Although this may be changed in the future. -+ * -+ * Receiving side (mppe_decompress()) still accepts packets with compressed -+ * and uncompressed protocol field so you shouldn't get "Unsupported protocol -+ * 0x2145 received" messages anymore. -+ */ -+ //off = (proto > 0xff) ? 2 : 3; /* PFC - skip first protocol byte if 0 */ -+ off = 2; -+ -+ ibuf += off; -+ -+ mppe_increase_ccount(state); -+ -+ if (state->nextflushed) { -+ state->bits |= MPPE_BIT_FLUSHED; -+ state->nextflushed = 0; -+ if (state->mppe && !state->stateless) { -+ /* -+ * If this is the flag packet, the key has been already changed in -+ * mppe_increase_ccount() so we dont't do it once again. -+ */ -+ if ((state->ccount & 0xff) != 0xff) { -+ arc4_setkey(state, state->session_key, state->keylen); -+ } -+ } -+ if (state->mppc) { /* reset history */ -+ state->bits |= MPPE_BIT_RESET; -+ state->histptr = MPPE_HIST_LEN; -+ memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8)); -+ } -+ } -+ -+ if (state->mppc && !state->mppe) { /* Do only compression */ -+ complen = mppc_compress(state, ibuf, wptr, isize - off, -+ osize - PPP_HDRLEN - (MPPE_OVHD / 2)); -+ /* -+ * TODO: Implement an heuristics to handle packet expansion in a smart -+ * way. Now, when a packet expands, we send it as uncompressed and -+ * when next packet is sent we have to reset compressor's history. -+ * Maybe it would be better to send such packet as compressed in order -+ * to keep history's continuity. -+ */ -+ if ((complen > isize) || (complen > osize - PPP_HDRLEN) || -+ (complen == 0)) { -+ /* packet expands */ -+ state->nextflushed = 1; -+ memcpy(wptr, ibuf, isize - off); -+ olen = isize - (off - 2) + MPPE_OVHD; -+ (state->stats).inc_bytes += olen; -+ (state->stats).inc_packets++; -+ } else { -+ state->bits |= MPPE_BIT_COMP; -+ olen = complen + PPP_HDRLEN + (MPPE_OVHD / 2); -+ (state->stats).comp_bytes += olen; -+ (state->stats).comp_packets++; -+ } -+ } else { /* Do encryption with or without compression */ -+ state->bits |= MPPE_BIT_ENCRYPTED; -+ if (!state->mppc && state->mppe) { /* Do only encryption */ -+ /* read from ibuf, write to wptr, adjust for PPP_HDRLEN */ -+ arc4_encrypt(state, ibuf, isize - off, wptr); -+ olen = isize - (off - 2) + MPPE_OVHD; -+ (state->stats).inc_bytes += olen; -+ (state->stats).inc_packets++; -+ } else { /* Do compression and then encryption - RFC3078 */ -+ complen = mppc_compress(state, ibuf, wptr, isize - off, -+ osize - PPP_HDRLEN - (MPPE_OVHD / 2)); -+ /* -+ * TODO: Implement an heuristics to handle packet expansion in a smart -+ * way. Now, when a packet expands, we send it as uncompressed and -+ * when next packet is sent we have to reset compressor's history. -+ * Maybe it would be good to send such packet as compressed in order -+ * to keep history's continuity. -+ */ -+ if ((complen > isize) || (complen > osize - PPP_HDRLEN) || -+ (complen == 0)) { -+ /* packet expands */ -+ state->nextflushed = 1; -+ arc4_encrypt(state, ibuf, isize - off, wptr); -+ olen = isize - (off - 2) + MPPE_OVHD; -+ (state->stats).inc_bytes += olen; -+ (state->stats).inc_packets++; -+ } else { -+ state->bits |= MPPE_BIT_COMP; -+ /* Hack warning !!! RC4 implementation which we use does -+ encryption "in place" - it means that input and output -+ buffers can be *the same* memory area. Therefore we don't -+ need to use a temporary buffer. But be careful - other -+ implementations don't have to be so nice. -+ I used to use ibuf as temporary buffer here, but it led -+ packet sniffers into error. Thanks to Wilfried Weissmann -+ for pointing that. */ -+ arc4_encrypt(state, wptr, complen, wptr); -+ olen = complen + PPP_HDRLEN + (MPPE_OVHD / 2); -+ (state->stats).comp_bytes += olen; -+ (state->stats).comp_packets++; -+ } -+ } -+ } -+ -+ /* write status bits and coherency counter into the output buffer */ -+ wptr = obuf + PPP_HDRLEN; -+ wptr[0] = MPPE_CTRLHI(state); -+ wptr[1] = MPPE_CTRLLO(state); -+ -+ state->bits = 0; -+ -+ (state->stats).unc_bytes += isize; -+ (state->stats).unc_packets++; -+ -+ return olen; -+} -+ -+/***************************/ -+/*** Decompression stuff ***/ -+/***************************/ -+static inline u32 getbits(const u8 *buf, const u32 n, u32 *i, u32 *l) -+{ -+ static const u32 m[] = {0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff}; -+ u32 res, ol; -+ -+ ol = *l; -+ if (*l >= n) { -+ *l = (*l) - n; -+ res = (buf[*i] & m[ol]) >> (*l); -+ if (*l == 0) { -+ *l = 8; -+ (*i)++; -+ } -+ } else { -+ *l = 8 - n + (*l); -+ res = (buf[(*i)++] & m[ol]) << 8; -+ res = (res | buf[*i]) >> (*l); -+ } -+ -+ return res; -+} -+ -+static inline u32 getbyte(const u8 *buf, const u32 i, const u32 l) -+{ -+ if (l == 8) { -+ return buf[i]; -+ } else { -+ return (((buf[i] << 8) | buf[i+1]) >> l) & 0xff; -+ } -+} -+ -+static inline void lamecopy(u8 *dst, u8 *src, u32 len) -+{ -+ while (len--) -+ *dst++ = *src++; -+} -+ -+static int -+mppc_decompress(struct ppp_mppe_state *state, unsigned char *ibuf, -+ unsigned char *obuf, int isize, int osize) -+{ -+ u32 olen, off, len, bits, val, sig, i, l; -+ u8 *history, *s; -+ -+ history = state->hist + state->histptr; -+ olen = len = i = 0; -+ l = 8; -+ bits = isize * 8; -+ while (bits >= 8) { -+ val = getbyte(ibuf, i++, l); -+ if (val < 0x80) { /* literal byte < 0x80 */ -+ if (state->histptr < 2*MPPE_HIST_LEN) { -+ /* copy uncompressed byte to the history */ -+ (state->hist)[(state->histptr)++] = (u8) val; -+ } else { -+ /* buffer overflow; drop packet */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: trying to write outside history " -+ "buffer\n", __FUNCTION__, state->unit); -+ return DECOMP_ERROR; -+ } -+ olen++; -+ bits -= 8; -+ continue; -+ } -+ -+ sig = val & 0xc0; -+ if (sig == 0x80) { /* literal byte >= 0x80 */ -+ if (state->histptr < 2*MPPE_HIST_LEN) { -+ /* copy uncompressed byte to the history */ -+ (state->hist)[(state->histptr)++] = -+ (u8) (0x80|((val&0x3f)<<1)|getbits(ibuf, 1 , &i ,&l)); -+ } else { -+ /* buffer overflow; drop packet */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: trying to write outside history " -+ "buffer\n", __FUNCTION__, state->unit); -+ return DECOMP_ERROR; -+ } -+ olen++; -+ bits -= 9; -+ continue; -+ } -+ -+ /* Not a literal byte so it must be an (offset,length) pair */ -+ /* decode offset */ -+ sig = val & 0xf0; -+ if (sig == 0xf0) { /* 10-bit offset; 0 <= offset < 64 */ -+ off = (((val&0x0f)<<2)|getbits(ibuf, 2 , &i ,&l)); -+ bits -= 10; -+ } else { -+ if (sig == 0xe0) { /* 12-bit offset; 64 <= offset < 320 */ -+ off = ((((val&0x0f)<<4)|getbits(ibuf, 4 , &i ,&l))+64); -+ bits -= 12; -+ } else { -+ if ((sig&0xe0) == 0xc0) {/* 16-bit offset; 320 <= offset < 8192 */ -+ off = ((((val&0x1f)<<8)|getbyte(ibuf, i++, l))+320); -+ bits -= 16; -+ if (off > MPPE_HIST_LEN - 1) { -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: too big offset value: %d\n", -+ __FUNCTION__, state->unit, off); -+ return DECOMP_ERROR; -+ } -+ } else { /* this shouldn't happen */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: cannot decode offset value\n", -+ __FUNCTION__, state->unit); -+ return DECOMP_ERROR; -+ } -+ } -+ } -+ /* decode length of match */ -+ val = getbyte(ibuf, i, l); -+ if ((val & 0x80) == 0x00) { /* len = 3 */ -+ len = 3; -+ bits--; -+ getbits(ibuf, 1 , &i ,&l); -+ } else if ((val & 0xc0) == 0x80) { /* 4 <= len < 8 */ -+ len = 0x04 | ((val>>4) & 0x03); -+ bits -= 4; -+ getbits(ibuf, 4 , &i ,&l); -+ } else if ((val & 0xe0) == 0xc0) { /* 8 <= len < 16 */ -+ len = 0x08 | ((val>>2) & 0x07); -+ bits -= 6; -+ getbits(ibuf, 6 , &i ,&l); -+ } else if ((val & 0xf0) == 0xe0) { /* 16 <= len < 32 */ -+ len = 0x10 | (val & 0x0f); -+ bits -= 8; -+ i++; -+ } else { -+ bits -= 8; -+ val = (val << 8) | getbyte(ibuf, ++i, l); -+ if ((val & 0xf800) == 0xf000) { /* 32 <= len < 64 */ -+ len = 0x0020 | ((val >> 6) & 0x001f); -+ bits -= 2; -+ getbits(ibuf, 2 , &i ,&l); -+ } else if ((val & 0xfc00) == 0xf800) { /* 64 <= len < 128 */ -+ len = 0x0040 | ((val >> 4) & 0x003f); -+ bits -= 4; -+ getbits(ibuf, 4 , &i ,&l); -+ } else if ((val & 0xfe00) == 0xfc00) { /* 128 <= len < 256 */ -+ len = 0x0080 | ((val >> 2) & 0x007f); -+ bits -= 6; -+ getbits(ibuf, 6 , &i ,&l); -+ } else if ((val & 0xff00) == 0xfe00) { /* 256 <= len < 512 */ -+ len = 0x0100 | (val & 0x00ff); -+ bits -= 8; -+ i++; -+ } else { -+ bits -= 8; -+ val = (val << 8) | getbyte(ibuf, ++i, l); -+ if ((val & 0xff8000) == 0xff0000) { /* 512 <= len < 1024 */ -+ len = 0x000200 | ((val >> 6) & 0x0001ff); -+ bits -= 2; -+ getbits(ibuf, 2 , &i ,&l); -+ } else if ((val & 0xffc000) == 0xff8000) {/* 1024 <= len < 2048 */ -+ len = 0x000400 | ((val >> 4) & 0x0003ff); -+ bits -= 4; -+ getbits(ibuf, 4 , &i ,&l); -+ } else if ((val & 0xffe000) == 0xffc000) {/* 2048 <= len < 4096 */ -+ len = 0x000800 | ((val >> 2) & 0x0007ff); -+ bits -= 6; -+ getbits(ibuf, 6 , &i ,&l); -+ } else if ((val & 0xfff000) == 0xffe000) {/* 4096 <= len < 8192 */ -+ len = 0x001000 | (val & 0x000fff); -+ bits -= 8; -+ i++; -+ } else { /* this shouldn't happen */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: wrong length code: 0x%X\n", -+ __FUNCTION__, state->unit, val); -+ return DECOMP_ERROR; -+ } -+ } -+ } -+ s = state->hist + state->histptr; -+ state->histptr += len; -+ olen += len; -+ if (state->histptr < 2*MPPE_HIST_LEN) { -+ /* copy uncompressed bytes to the history */ -+ -+ /* In some cases len may be greater than off. It means that memory -+ * areas pointed by s and s-off overlap. I had used memmove() here -+ * because I thought that it acts as libc's version. Unfortunately, -+ * I was wrong. :-) I got strange errors sometimes. Wilfried suggested -+ * using of byte by byte copying here and strange errors disappeared. -+ */ -+ lamecopy(s, s - off, len); -+ } else { -+ /* buffer overflow; drop packet */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: trying to write outside history " -+ "buffer\n", __FUNCTION__, state->unit); -+ return DECOMP_ERROR; -+ } -+ } -+ -+ /* Do PFC decompression */ -+ len = olen; -+ if ((history[0] & 0x01) != 0) { -+ obuf[0] = 0; -+ obuf++; -+ len++; -+ } -+ -+ if (len <= osize) { -+ /* copy uncompressed packet to the output buffer */ -+ memcpy(obuf, history, olen); -+ } else { -+ /* buffer overflow; drop packet */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: too big uncompressed packet: %d\n", -+ __FUNCTION__, state->unit, len + (PPP_HDRLEN / 2)); -+ return DECOMP_ERROR; -+ } -+ -+ return (int) len; -+} -+ -+int -+mppe_decompress(void *arg, unsigned char *ibuf, int isize, -+ unsigned char *obuf, int osize) -+{ -+ struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg; -+ int seq, bits, uncomplen; -+ -+ if (isize <= PPP_HDRLEN + MPPE_OVHD) { -+ if (state->debug) { -+ printk(KERN_DEBUG "%s%d: short packet (len=%d)\n", __FUNCTION__, -+ state->unit, isize); -+ } -+ return DECOMP_ERROR; -+ } -+ -+ /* Get coherency counter and control bits from input buffer */ -+ seq = MPPE_CCOUNT(ibuf); -+ bits = MPPE_BITS(ibuf); -+ -+ if (state->stateless) { -+ /* RFC 3078, sec 8.1. */ -+ mppe_increase_ccount(state); -+ if ((seq != state->ccount) && state->debug) -+ printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n", -+ __FUNCTION__, state->unit, seq, state->ccount); -+ while (seq != state->ccount) -+ mppe_increase_ccount(state); -+ } else { -+ /* RFC 3078, sec 8.2. */ -+ if (state->flushexpected) { /* discard state */ -+ if ((bits & MPPE_BIT_FLUSHED)) { /* we received expected FLUSH bit */ -+ while (seq != state->ccount) -+ mppe_increase_ccount(state); -+ state->flushexpected = 0; -+ } else /* drop packet*/ -+ return DECOMP_ERROR; -+ } else { /* normal state */ -+ mppe_increase_ccount(state); -+ if (seq != state->ccount) { -+ /* Packet loss detected, enter the discard state. */ -+ if (state->debug) -+ printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n", -+ __FUNCTION__, state->unit, seq, state->ccount); -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ } -+ if (state->mppe && (bits & MPPE_BIT_FLUSHED)) { -+ arc4_setkey(state, state->session_key, state->keylen); -+ } -+ } -+ -+ if (state->mppc && (bits & (MPPE_BIT_FLUSHED | MPPE_BIT_RESET))) { -+ state->histptr = MPPE_HIST_LEN; -+ if ((bits & MPPE_BIT_FLUSHED)) { -+ memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8)); -+ } else -+ if ((bits & MPPE_BIT_RESET)) { -+ memcpy(state->hist, state->hist + MPPE_HIST_LEN, MPPE_HIST_LEN); -+ } -+ } -+ -+ /* Fill in the first part of the PPP header. The protocol field -+ comes from the decompressed data. */ -+ obuf[0] = PPP_ADDRESS(ibuf); -+ obuf[1] = PPP_CONTROL(ibuf); -+ obuf += PPP_HDRLEN / 2; -+ -+ if (state->mppe) { /* process encrypted packet */ -+ if ((bits & MPPE_BIT_ENCRYPTED)) { -+ /* OK, packet encrypted, so decrypt it */ -+ if (state->mppc && (bits & MPPE_BIT_COMP)) { -+ /* Hack warning !!! RC4 implementation which we use does -+ decryption "in place" - it means that input and output -+ buffers can be *the same* memory area. Therefore we don't -+ need to use a temporary buffer. But be careful - other -+ implementations don't have to be so nice. */ -+ arc4_decrypt(state, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2), isize - -+ PPP_HDRLEN - (MPPE_OVHD / 2), ibuf + PPP_HDRLEN + -+ (MPPE_OVHD / 2)); -+ uncomplen = mppc_decompress(state, ibuf + PPP_HDRLEN + -+ (MPPE_OVHD / 2), obuf, isize - -+ PPP_HDRLEN - (MPPE_OVHD / 2), -+ osize - (PPP_HDRLEN / 2)); -+ if (uncomplen == DECOMP_ERROR) { -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ uncomplen += PPP_HDRLEN / 2; -+ (state->stats).comp_bytes += isize; -+ (state->stats).comp_packets++; -+ } else { -+ uncomplen = isize - MPPE_OVHD; -+ /* Decrypt the first byte in order to check if it is -+ compressed or uncompressed protocol field */ -+ arc4_decrypt(state, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2), 1, obuf); -+ /* Do PFC decompression */ -+ if ((obuf[0] & 0x01) != 0) { -+ obuf[1] = obuf[0]; -+ obuf[0] = 0; -+ obuf++; -+ uncomplen++; -+ } -+ /* And finally, decrypt the rest of the frame. */ -+ arc4_decrypt(state, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2) + 1, -+ isize - PPP_HDRLEN - (MPPE_OVHD / 2) - 1, obuf + 1); -+ (state->stats).inc_bytes += isize; -+ (state->stats).inc_packets++; -+ } -+ } else { /* this shouldn't happen */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: encryption negotiated but not an " -+ "encrypted packet received\n", __FUNCTION__, state->unit); -+ mppe_change_key(state, 0); -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ } else { -+ if (state->mppc) { /* no MPPE, only MPPC */ -+ if ((bits & MPPE_BIT_COMP)) { -+ uncomplen = mppc_decompress(state, ibuf + PPP_HDRLEN + -+ (MPPE_OVHD / 2), obuf, isize - -+ PPP_HDRLEN - (MPPE_OVHD / 2), -+ osize - (PPP_HDRLEN / 2)); -+ if (uncomplen == DECOMP_ERROR) { -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ uncomplen += PPP_HDRLEN / 2; -+ (state->stats).comp_bytes += isize; -+ (state->stats).comp_packets++; -+ } else { -+ memcpy(obuf, ibuf + PPP_HDRLEN + (MPPE_OVHD / 2), isize - -+ PPP_HDRLEN - (MPPE_OVHD / 2)); -+ uncomplen = isize - MPPE_OVHD; -+ (state->stats).inc_bytes += isize; -+ (state->stats).inc_packets++; -+ } -+ } else { /* this shouldn't happen */ -+ if (state->debug) -+ printk(KERN_ERR "%s%d: error - not an MPPC or MPPE frame " -+ "received\n", __FUNCTION__, state->unit); -+ state->flushexpected = 1; -+ return DECOMP_ERROR; -+ } -+ } -+ -+ (state->stats).unc_bytes += uncomplen; -+ (state->stats).unc_packets++; -+ -+ return uncomplen; -+} -+ -+ -+/************************************************************ -+ * Module interface table -+ ************************************************************/ -+ -+/* These are in ppp_generic.c */ -+extern int ppp_register_compressor (struct compressor *cp); -+extern void ppp_unregister_compressor (struct compressor *cp); -+ -+/* -+ * Functions exported to ppp_generic.c. -+ * -+ * In case of MPPC/MPPE there is no need to process incompressible data -+ * because such a data is sent in MPPC/MPPE frame. Therefore the (*incomp) -+ * callback function isn't needed. -+ */ -+struct compressor ppp_mppe = { -+ .compress_proto = CI_MPPE, -+ .comp_alloc = mppe_comp_alloc, -+ .comp_free = mppe_comp_free, -+ .comp_init = mppe_comp_init, -+ .comp_reset = mppe_comp_reset, -+ .compress = mppe_compress, -+ .comp_stat = mppe_stats, -+ .decomp_alloc = mppe_decomp_alloc, -+ .decomp_free = mppe_comp_free, -+ .decomp_init = mppe_decomp_init, -+ .decomp_reset = mppe_decomp_reset, -+ .decompress = mppe_decompress, -+ .incomp = NULL, -+ .decomp_stat = mppe_stats, -+ .owner = THIS_MODULE -+}; -+ -+/************************************************************ -+ * Module support routines -+ ************************************************************/ -+ -+int __init mppe_module_init(void) -+{ -+ int answer; -+ -+ if (!(crypto_alg_available("arc4", 0) && crypto_alg_available("sha1", 0))) { -+ printk(KERN_ERR "Kernel doesn't provide ARC4 and/or SHA1 algorithms " -+ "required by MPPE/MPPC. Check CryptoAPI configuration.\n"); -+ return -ENODEV; -+ } -+ -+ /* Allocate space for SHAPad1, SHAPad2 and ... */ -+ sha_pad = kmalloc(sizeof(struct sha_pad), GFP_KERNEL); -+ if (sha_pad == NULL) -+ return -ENOMEM; -+ /* ... initialize them */ -+ memset(sha_pad->sha_pad1, 0x00, sizeof(sha_pad->sha_pad1)); -+ memset(sha_pad->sha_pad2, 0xf2, sizeof(sha_pad->sha_pad2)); -+ -+ answer = ppp_register_compressor(&ppp_mppe); -+ if (answer == 0) { -+ printk(KERN_INFO "MPPE/MPPC encryption/compression module registered\n"); -+ } -+ return answer; -+} -+ -+void __exit mppe_module_cleanup(void) -+{ -+ kfree(sha_pad); -+ ppp_unregister_compressor(&ppp_mppe); -+ printk(KERN_INFO "MPPE/MPPC encryption/compression module unregistered\n"); -+} -+ -+module_init(mppe_module_init); -+module_exit(mppe_module_cleanup); -+ -+MODULE_AUTHOR("Jan Dubiec "); -+MODULE_DESCRIPTION("MPPE/MPPC encryption/compression module for Linux"); -+MODULE_VERSION("1.2"); -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_ALIAS("ppp-compress-" __stringify(CI_MPPE)); -diff -ruN linux-2.6.12.orig/include/linux/ppp-comp.h linux-2.6.12/include/linux/ppp-comp.h ---- linux-2.6.12.orig/include/linux/ppp-comp.h 2004-12-24 22:33:47.000000000 +0100 -+++ linux-2.6.12/include/linux/ppp-comp.h 2005-06-28 20:07:01.000000000 +0200 -@@ -28,7 +28,7 @@ - */ - - /* -- * ==FILEVERSION 980319== -+ * ==FILEVERSION 20040509== - * - * NOTE TO MAINTAINERS: - * If you modify this file at all, please set the above date. -@@ -80,7 +80,7 @@ - - /* Compress a packet */ - int (*compress) (void *state, unsigned char *rptr, -- unsigned char *obuf, int isize, int osize); -+ unsigned char *obuf, int isize, int osize); - - /* Return compression statistics */ - void (*comp_stat) (void *state, struct compstat *stats); -@@ -101,7 +101,7 @@ - - /* Decompress a packet. */ - int (*decompress) (void *state, unsigned char *ibuf, int isize, -- unsigned char *obuf, int osize); -+ unsigned char *obuf, int osize); - - /* Update state for an incompressible packet received */ - void (*incomp) (void *state, unsigned char *ibuf, int icnt); -@@ -191,6 +191,42 @@ - #define DEFLATE_CHK_SEQUENCE 0 - - /* -+ * Definitions for MPPE/MPPC. -+ */ -+ -+#define CI_MPPE 18 /* config option for MPPE */ -+#define CILEN_MPPE 6 /* length of config option */ -+ -+#define MPPE_OVHD 4 /* MPPE overhead */ -+#define MPPE_MAX_KEY_LEN 16 /* largest key length (128-bit) */ -+ -+#define MPPE_STATELESS 0x01 /* configuration bit H */ -+#define MPPE_40BIT 0x20 /* configuration bit L */ -+#define MPPE_56BIT 0x80 /* configuration bit M */ -+#define MPPE_128BIT 0x40 /* configuration bit S */ -+#define MPPE_MPPC 0x01 /* configuration bit C */ -+ -+/* -+ * Definitions for Stac LZS. -+ */ -+ -+#define CI_LZS 17 /* config option for Stac LZS */ -+#define CILEN_LZS 5 /* length of config option */ -+ -+#define LZS_OVHD 4 /* max. LZS overhead */ -+#define LZS_HIST_LEN 2048 /* LZS history size */ -+#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */ -+ -+#define LZS_MODE_NONE 0 -+#define LZS_MODE_LCB 1 -+#define LZS_MODE_CRC 2 -+#define LZS_MODE_SEQ 3 -+#define LZS_MODE_EXT 4 -+ -+#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */ -+#define LZS_EXT_BIT_COMP 0x20 /* bit C */ -+ -+/* - * Definitions for other, as yet unsupported, compression methods. - */ - -- cgit v1.2.3