From c4ff1243ac41da7c225c206067d399c5453e75e2 Mon Sep 17 00:00:00 2001
From: blogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Tue, 12 Mar 2013 13:52:54 +0000
Subject: [lantiq] add support for AudioCodes AC-252

user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35990 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../lantiq/base-files/etc/uci-defaults/02_network  |   2 +-
 target/linux/lantiq/image/ACMP252.dts              | 103 +++++++++++++++++++++
 target/linux/lantiq/image/Makefile                 |   3 +
 target/linux/lantiq/xway/profiles/audiocodes.mk    |   9 ++
 4 files changed, 116 insertions(+), 1 deletion(-)
 create mode 100644 target/linux/lantiq/image/ACMP252.dts
 create mode 100644 target/linux/lantiq/xway/profiles/audiocodes.mk

(limited to 'target/linux/lantiq')

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index db5b58e97..1eadb5687 100755
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -47,7 +47,7 @@ ARV4520PW)
 	ucidef_add_switch_vlan "eth0" "1" "3 2 1 0 5t"
 	;;
 
-GIGASX76X)
+ACMP252|GIGASX76X)
 	ucidef_set_interface_lan "eth0.1"
 	ucidef_add_switch "eth0" "1" "1"
 	ucidef_add_switch_vlan "eth0" "1" "4 3 2 1 5t"
diff --git a/target/linux/lantiq/image/ACMP252.dts b/target/linux/lantiq/image/ACMP252.dts
new file mode 100644
index 000000000..174ae2e7e
--- /dev/null
+++ b/target/linux/lantiq/image/ACMP252.dts
@@ -0,0 +1,103 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	model = "ACMP252 - AudioCodes MediaPack MP-252";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 0>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x0 0x20000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "uboot_env";
+					reg = <0x20000 0x20000>;
+				};
+
+				partition@40000 {
+					label = "boardconfig";
+					reg = <0x40000 0x60000>;
+					read-only;
+				};
+
+				partition@a0000 {
+					label = "linux";
+					reg = <0xa0000 0xf20000>;
+				};
+
+				partition@fc0000 {
+					label = "sysconfig";
+					reg = <0xfc0000 0x40000>;
+				};
+
+				partition@0x1000000 {
+					label = "rootfs_data";
+					reg = <0x1000000 0x1000000>;
+				};
+
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1", "req1";
+					lantiq,function = "pci";
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 28 0>;
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		pci@E105400 {
+			status = "okay";
+			interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
+			req-mask = <0x1>;
+		};
+	};
+
+	ralink_eep {
+		compatible = "ralink,eeprom";
+		ralink,eeprom = "RT2860.eeprom";
+	};
+};
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index a68d65b2d..067767fb3 100644
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -131,6 +131,9 @@ ifeq ($(CONFIG_TARGET_lantiq_xway),y)
 Image/BuildKernel/Profile/EASY50712=$(call Image/BuildKernel/Template,EASY50712)
 Image/Build/Profile/EASY50712=$(call Image/Build/$(1),$(1),EASY50712)
 
+Image/BuildKernel/Profile/ACMP252=$(call Image/BuildKernel/Template,ACMP252)
+Image/Build/Profile/ACMP252=$(call Image/Build/$(1),$(1),ACMP252)
+
 Image/BuildKernel/Profile/ARV4510PW=$(call Image/BuildKernel/Template,ARV4510PW)
 Image/Build/Profile/ARV4510PW=$(call Image/Build/$(1),$(1),ARV4510PW)
 
diff --git a/target/linux/lantiq/xway/profiles/audiocodes.mk b/target/linux/lantiq/xway/profiles/audiocodes.mk
new file mode 100644
index 000000000..5f24dfc77
--- /dev/null
+++ b/target/linux/lantiq/xway/profiles/audiocodes.mk
@@ -0,0 +1,9 @@
+define Profile/ACMP252
+  NAME:=AudioCodes MediaPack MP-252
+  PACKAGES:=kmod-rt2x00 wpad-mini \
+	kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
+	kmod-ltq-adsl-danube-fw-a kmod-ltq-ptm-danube \
+	ltq-adsl-app
+endef
+
+$(eval $(call Profile,ACMP252))
-- 
cgit v1.2.3