From cb5bddeee233e4d33857b5dd46cf2bc906e7fd19 Mon Sep 17 00:00:00 2001
From: florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Tue, 8 Jan 2013 22:19:31 +0000
Subject: kernel: add support for 3.8-rc2

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35055 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../generic/patches-3.8/726-phy_rtl8366.patch      | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 target/linux/generic/patches-3.8/726-phy_rtl8366.patch

(limited to 'target/linux/generic/patches-3.8/726-phy_rtl8366.patch')

diff --git a/target/linux/generic/patches-3.8/726-phy_rtl8366.patch b/target/linux/generic/patches-3.8/726-phy_rtl8366.patch
new file mode 100644
index 000000000..12f8a3625
--- /dev/null
+++ b/target/linux/generic/patches-3.8/726-phy_rtl8366.patch
@@ -0,0 +1,45 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -215,6 +215,30 @@ config MDIO_BUS_MUX_MMIOREG
+ 
+ 	  Currently, only 8-bit registers are supported.
+ 
++config RTL8366_SMI
++	tristate "Driver for the RTL8366 SMI interface"
++	depends on GENERIC_GPIO
++	---help---
++	  This module implements the SMI interface protocol which is used
++	  by some RTL8366 ethernet switch devices via the generic GPIO API.
++
++if RTL8366_SMI
++
++config RTL8366_SMI_DEBUG_FS
++	bool "RTL8366 SMI interface debugfs support"
++        depends on DEBUG_FS
++        default n
++
++config RTL8366S_PHY
++	tristate "Driver for the Realtek RTL8366S switch"
++	select SWCONFIG
++
++config RTL8366RB_PHY
++	tristate "Driver for the Realtek RTL8366RB switch"
++	select SWCONFIG
++
++endif # RTL8366_SMI
++
+ endif # PHYLIB
+ 
+ config MICREL_KS8995MA
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -23,6 +23,9 @@ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
++obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
++obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
-- 
cgit v1.2.3