From ed393487fdd365391940b832e8c63b83c87d2514 Mon Sep 17 00:00:00 2001 From: juhosg Date: Thu, 14 Feb 2013 14:55:40 +0000 Subject: generic: ar8216: move PHY4 RGMII workaround code out of the loop Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35603 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../linux/generic/files/drivers/net/phy/ar8216.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'target/linux/generic/files/drivers') diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c index 97a2cca6c..b34c2a863 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8216.c +++ b/target/linux/generic/files/drivers/net/phy/ar8216.c @@ -820,20 +820,20 @@ ar8316_hw_init(struct ar8216_priv *priv) priv->write(priv, AR8316_REG_POSTRIP, newval); + if (priv->port4_phy && + priv->phy->interface == PHY_INTERFACE_MODE_RGMII) { + /* work around for phy4 rgmii mode */ + ar8216_phy_dbg_write(priv, 4, 0x12, 0x480c); + /* rx delay */ + ar8216_phy_dbg_write(priv, 4, 0x0, 0x824e); + /* tx delay */ + ar8216_phy_dbg_write(priv, 4, 0x5, 0x3d47); + msleep(1000); + } + /* Initialize the ports */ bus = priv->mii_bus; for (i = 0; i < 5; i++) { - if ((i == 4) && priv->port4_phy && - priv->phy->interface == PHY_INTERFACE_MODE_RGMII) { - /* work around for phy4 rgmii mode */ - ar8216_phy_dbg_write(priv, i, 0x12, 0x480c); - /* rx delay */ - ar8216_phy_dbg_write(priv, i, 0x0, 0x824e); - /* tx delay */ - ar8216_phy_dbg_write(priv, i, 0x5, 0x3d47); - msleep(1000); - } - /* initialize the port itself */ mdiobus_write(bus, i, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); -- cgit v1.2.3