From c5552ad03973839d83d32d7108f20c00f192633b Mon Sep 17 00:00:00 2001 From: nbd Date: Sat, 26 Jun 2010 20:42:58 +0000 Subject: rename target/linux/generic-2.6 to generic git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21952 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../linux/generic/files/crypto/ocf/safe/safereg.h | 421 +++++++++++++++++++++ 1 file changed, 421 insertions(+) create mode 100644 target/linux/generic/files/crypto/ocf/safe/safereg.h (limited to 'target/linux/generic/files/crypto/ocf/safe/safereg.h') diff --git a/target/linux/generic/files/crypto/ocf/safe/safereg.h b/target/linux/generic/files/crypto/ocf/safe/safereg.h new file mode 100644 index 000000000..dbaf98fe7 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/safe/safereg.h @@ -0,0 +1,421 @@ +/*- + * Copyright (c) 2003 Sam Leffler, Errno Consulting + * Copyright (c) 2003 Global Technology Associates, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD: src/sys/dev/safe/safereg.h,v 1.1 2003/07/21 21:46:07 sam Exp $ + */ +#ifndef _SAFE_SAFEREG_H_ +#define _SAFE_SAFEREG_H_ + +/* + * Register definitions for SafeNet SafeXcel-1141 crypto device. + * Definitions from revision 1.3 (Nov 6 2002) of the User's Manual. + */ + +#define BS_BAR 0x10 /* DMA base address register */ +#define BS_TRDY_TIMEOUT 0x40 /* TRDY timeout */ +#define BS_RETRY_TIMEOUT 0x41 /* DMA retry timeout */ + +#define PCI_VENDOR_SAFENET 0x16ae /* SafeNet, Inc. */ + +/* SafeNet */ +#define PCI_PRODUCT_SAFEXCEL 0x1141 /* 1141 */ + +#define SAFE_PE_CSR 0x0000 /* Packet Enginge Ctrl/Status */ +#define SAFE_PE_SRC 0x0004 /* Packet Engine Source */ +#define SAFE_PE_DST 0x0008 /* Packet Engine Destination */ +#define SAFE_PE_SA 0x000c /* Packet Engine SA */ +#define SAFE_PE_LEN 0x0010 /* Packet Engine Length */ +#define SAFE_PE_DMACFG 0x0040 /* Packet Engine DMA Configuration */ +#define SAFE_PE_DMASTAT 0x0044 /* Packet Engine DMA Status */ +#define SAFE_PE_PDRBASE 0x0048 /* Packet Engine Descriptor Ring Base */ +#define SAFE_PE_RDRBASE 0x004c /* Packet Engine Result Ring Base */ +#define SAFE_PE_RINGCFG 0x0050 /* Packet Engine Ring Configuration */ +#define SAFE_PE_RINGPOLL 0x0054 /* Packet Engine Ring Poll */ +#define SAFE_PE_IRNGSTAT 0x0058 /* Packet Engine Internal Ring Status */ +#define SAFE_PE_ERNGSTAT 0x005c /* Packet Engine External Ring Status */ +#define SAFE_PE_IOTHRESH 0x0060 /* Packet Engine I/O Threshold */ +#define SAFE_PE_GRNGBASE 0x0064 /* Packet Engine Gather Ring Base */ +#define SAFE_PE_SRNGBASE 0x0068 /* Packet Engine Scatter Ring Base */ +#define SAFE_PE_PARTSIZE 0x006c /* Packet Engine Particlar Ring Size */ +#define SAFE_PE_PARTCFG 0x0070 /* Packet Engine Particle Ring Config */ +#define SAFE_CRYPTO_CTRL 0x0080 /* Crypto Control */ +#define SAFE_DEVID 0x0084 /* Device ID */ +#define SAFE_DEVINFO 0x0088 /* Device Info */ +#define SAFE_HU_STAT 0x00a0 /* Host Unmasked Status */ +#define SAFE_HM_STAT 0x00a4 /* Host Masked Status (read-only) */ +#define SAFE_HI_CLR 0x00a4 /* Host Clear Interrupt (write-only) */ +#define SAFE_HI_MASK 0x00a8 /* Host Mask Control */ +#define SAFE_HI_CFG 0x00ac /* Interrupt Configuration */ +#define SAFE_HI_RD_DESCR 0x00b4 /* Force Descriptor Read */ +#define SAFE_HI_DESC_CNT 0x00b8 /* Host Descriptor Done Count */ +#define SAFE_DMA_ENDIAN 0x00c0 /* Master Endian Status */ +#define SAFE_DMA_SRCADDR 0x00c4 /* DMA Source Address Status */ +#define SAFE_DMA_DSTADDR 0x00c8 /* DMA Destination Address Status */ +#define SAFE_DMA_STAT 0x00cc /* DMA Current Status */ +#define SAFE_DMA_CFG 0x00d4 /* DMA Configuration/Status */ +#define SAFE_ENDIAN 0x00e0 /* Endian Configuration */ +#define SAFE_PK_A_ADDR 0x0800 /* Public Key A Address */ +#define SAFE_PK_B_ADDR 0x0804 /* Public Key B Address */ +#define SAFE_PK_C_ADDR 0x0808 /* Public Key C Address */ +#define SAFE_PK_D_ADDR 0x080c /* Public Key D Address */ +#define SAFE_PK_A_LEN 0x0810 /* Public Key A Length */ +#define SAFE_PK_B_LEN 0x0814 /* Public Key B Length */ +#define SAFE_PK_SHIFT 0x0818 /* Public Key Shift */ +#define SAFE_PK_FUNC 0x081c /* Public Key Function */ +#define SAFE_PK_RAM_START 0x1000 /* Public Key RAM start address */ +#define SAFE_PK_RAM_END 0x1fff /* Public Key RAM end address */ + +#define SAFE_RNG_OUT 0x0100 /* RNG Output */ +#define SAFE_RNG_STAT 0x0104 /* RNG Status */ +#define SAFE_RNG_CTRL 0x0108 /* RNG Control */ +#define SAFE_RNG_A 0x010c /* RNG A */ +#define SAFE_RNG_B 0x0110 /* RNG B */ +#define SAFE_RNG_X_LO 0x0114 /* RNG X [31:0] */ +#define SAFE_RNG_X_MID 0x0118 /* RNG X [63:32] */ +#define SAFE_RNG_X_HI 0x011c /* RNG X [80:64] */ +#define SAFE_RNG_X_CNTR 0x0120 /* RNG Counter */ +#define SAFE_RNG_ALM_CNT 0x0124 /* RNG Alarm Count */ +#define SAFE_RNG_CNFG 0x0128 /* RNG Configuration */ +#define SAFE_RNG_LFSR1_LO 0x012c /* RNG LFSR1 [31:0] */ +#define SAFE_RNG_LFSR1_HI 0x0130 /* RNG LFSR1 [47:32] */ +#define SAFE_RNG_LFSR2_LO 0x0134 /* RNG LFSR1 [31:0] */ +#define SAFE_RNG_LFSR2_HI 0x0138 /* RNG LFSR1 [47:32] */ + +#define SAFE_PE_CSR_READY 0x00000001 /* ready for processing */ +#define SAFE_PE_CSR_DONE 0x00000002 /* h/w completed processing */ +#define SAFE_PE_CSR_LOADSA 0x00000004 /* load SA digests */ +#define SAFE_PE_CSR_HASHFINAL 0x00000010 /* do hash pad & write result */ +#define SAFE_PE_CSR_SABUSID 0x000000c0 /* bus id for SA */ +#define SAFE_PE_CSR_SAPCI 0x00000040 /* PCI bus id for SA */ +#define SAFE_PE_CSR_NXTHDR 0x0000ff00 /* next hdr value for IPsec */ +#define SAFE_PE_CSR_FPAD 0x0000ff00 /* fixed pad for basic ops */ +#define SAFE_PE_CSR_STATUS 0x00ff0000 /* operation result status */ +#define SAFE_PE_CSR_AUTH_FAIL 0x00010000 /* ICV mismatch (inbound) */ +#define SAFE_PE_CSR_PAD_FAIL 0x00020000 /* pad verify fail (inbound) */ +#define SAFE_PE_CSR_SEQ_FAIL 0x00040000 /* sequence number (inbound) */ +#define SAFE_PE_CSR_XERROR 0x00080000 /* extended error follows */ +#define SAFE_PE_CSR_XECODE 0x00f00000 /* extended error code */ +#define SAFE_PE_CSR_XECODE_S 20 +#define SAFE_PE_CSR_XECODE_BADCMD 0 /* invalid command */ +#define SAFE_PE_CSR_XECODE_BADALG 1 /* invalid algorithm */ +#define SAFE_PE_CSR_XECODE_ALGDIS 2 /* algorithm disabled */ +#define SAFE_PE_CSR_XECODE_ZEROLEN 3 /* zero packet length */ +#define SAFE_PE_CSR_XECODE_DMAERR 4 /* bus DMA error */ +#define SAFE_PE_CSR_XECODE_PIPEABORT 5 /* secondary bus DMA error */ +#define SAFE_PE_CSR_XECODE_BADSPI 6 /* IPsec SPI mismatch */ +#define SAFE_PE_CSR_XECODE_TIMEOUT 10 /* failsafe timeout */ +#define SAFE_PE_CSR_PAD 0xff000000 /* ESP padding control/status */ +#define SAFE_PE_CSR_PAD_MIN 0x00000000 /* minimum IPsec padding */ +#define SAFE_PE_CSR_PAD_16 0x08000000 /* pad to 16-byte boundary */ +#define SAFE_PE_CSR_PAD_32 0x10000000 /* pad to 32-byte boundary */ +#define SAFE_PE_CSR_PAD_64 0x20000000 /* pad to 64-byte boundary */ +#define SAFE_PE_CSR_PAD_128 0x40000000 /* pad to 128-byte boundary */ +#define SAFE_PE_CSR_PAD_256 0x80000000 /* pad to 256-byte boundary */ + +/* + * Check the CSR to see if the PE has returned ownership to + * the host. Note that before processing a descriptor this + * must be done followed by a check of the SAFE_PE_LEN register + * status bits to avoid premature processing of a descriptor + * on its way back to the host. + */ +#define SAFE_PE_CSR_IS_DONE(_csr) \ + (((_csr) & (SAFE_PE_CSR_READY | SAFE_PE_CSR_DONE)) == SAFE_PE_CSR_DONE) + +#define SAFE_PE_LEN_LENGTH 0x000fffff /* total length (bytes) */ +#define SAFE_PE_LEN_READY 0x00400000 /* ready for processing */ +#define SAFE_PE_LEN_DONE 0x00800000 /* h/w completed processing */ +#define SAFE_PE_LEN_BYPASS 0xff000000 /* bypass offset (bytes) */ +#define SAFE_PE_LEN_BYPASS_S 24 + +#define SAFE_PE_LEN_IS_DONE(_len) \ + (((_len) & (SAFE_PE_LEN_READY | SAFE_PE_LEN_DONE)) == SAFE_PE_LEN_DONE) + +/* NB: these apply to HU_STAT, HM_STAT, HI_CLR, and HI_MASK */ +#define SAFE_INT_PE_CDONE 0x00000002 /* PE context done */ +#define SAFE_INT_PE_DDONE 0x00000008 /* PE descriptor done */ +#define SAFE_INT_PE_ERROR 0x00000010 /* PE error */ +#define SAFE_INT_PE_ODONE 0x00000020 /* PE operation done */ + +#define SAFE_HI_CFG_PULSE 0x00000001 /* use pulse interrupt */ +#define SAFE_HI_CFG_LEVEL 0x00000000 /* use level interrupt */ +#define SAFE_HI_CFG_AUTOCLR 0x00000002 /* auto-clear pulse interrupt */ + +#define SAFE_ENDIAN_PASS 0x000000e4 /* straight pass-thru */ +#define SAFE_ENDIAN_SWAB 0x0000001b /* swap bytes in 32-bit word */ + +#define SAFE_PE_DMACFG_PERESET 0x00000001 /* reset packet engine */ +#define SAFE_PE_DMACFG_PDRRESET 0x00000002 /* reset PDR counters/ptrs */ +#define SAFE_PE_DMACFG_SGRESET 0x00000004 /* reset scatter/gather cache */ +#define SAFE_PE_DMACFG_FSENA 0x00000008 /* enable failsafe reset */ +#define SAFE_PE_DMACFG_PEMODE 0x00000100 /* packet engine mode */ +#define SAFE_PE_DMACFG_SAPREC 0x00000200 /* SA precedes packet */ +#define SAFE_PE_DMACFG_PKFOLL 0x00000400 /* packet follows descriptor */ +#define SAFE_PE_DMACFG_GPRBID 0x00003000 /* gather particle ring busid */ +#define SAFE_PE_DMACFG_GPRPCI 0x00001000 /* PCI gather particle ring */ +#define SAFE_PE_DMACFG_SPRBID 0x0000c000 /* scatter part. ring busid */ +#define SAFE_PE_DMACFG_SPRPCI 0x00004000 /* PCI scatter part. ring */ +#define SAFE_PE_DMACFG_ESDESC 0x00010000 /* endian swap descriptors */ +#define SAFE_PE_DMACFG_ESSA 0x00020000 /* endian swap SA data */ +#define SAFE_PE_DMACFG_ESPACKET 0x00040000 /* endian swap packet data */ +#define SAFE_PE_DMACFG_ESPDESC 0x00080000 /* endian swap particle desc. */ +#define SAFE_PE_DMACFG_NOPDRUP 0x00100000 /* supp. PDR ownership update */ +#define SAFE_PD_EDMACFG_PCIMODE 0x01000000 /* PCI target mode */ + +#define SAFE_PE_DMASTAT_PEIDONE 0x00000001 /* PE core input done */ +#define SAFE_PE_DMASTAT_PEODONE 0x00000002 /* PE core output done */ +#define SAFE_PE_DMASTAT_ENCDONE 0x00000004 /* encryption done */ +#define SAFE_PE_DMASTAT_IHDONE 0x00000008 /* inner hash done */ +#define SAFE_PE_DMASTAT_OHDONE 0x00000010 /* outer hash (HMAC) done */ +#define SAFE_PE_DMASTAT_PADFLT 0x00000020 /* crypto pad fault */ +#define SAFE_PE_DMASTAT_ICVFLT 0x00000040 /* ICV fault */ +#define SAFE_PE_DMASTAT_SPIMIS 0x00000080 /* SPI mismatch */ +#define SAFE_PE_DMASTAT_CRYPTO 0x00000100 /* crypto engine timeout */ +#define SAFE_PE_DMASTAT_CQACT 0x00000200 /* command queue active */ +#define SAFE_PE_DMASTAT_IRACT 0x00000400 /* input request active */ +#define SAFE_PE_DMASTAT_ORACT 0x00000800 /* output request active */ +#define SAFE_PE_DMASTAT_PEISIZE 0x003ff000 /* PE input size:32-bit words */ +#define SAFE_PE_DMASTAT_PEOSIZE 0xffc00000 /* PE out. size:32-bit words */ + +#define SAFE_PE_RINGCFG_SIZE 0x000003ff /* ring size (descriptors) */ +#define SAFE_PE_RINGCFG_OFFSET 0xffff0000 /* offset btw desc's (dwords) */ +#define SAFE_PE_RINGCFG_OFFSET_S 16 + +#define SAFE_PE_RINGPOLL_POLL 0x00000fff /* polling frequency/divisor */ +#define SAFE_PE_RINGPOLL_RETRY 0x03ff0000 /* polling frequency/divisor */ +#define SAFE_PE_RINGPOLL_CONT 0x80000000 /* continuously poll */ + +#define SAFE_PE_IRNGSTAT_CQAVAIL 0x00000001 /* command queue available */ + +#define SAFE_PE_ERNGSTAT_NEXT 0x03ff0000 /* index of next packet desc. */ +#define SAFE_PE_ERNGSTAT_NEXT_S 16 + +#define SAFE_PE_IOTHRESH_INPUT 0x000003ff /* input threshold (dwords) */ +#define SAFE_PE_IOTHRESH_OUTPUT 0x03ff0000 /* output threshold (dwords) */ + +#define SAFE_PE_PARTCFG_SIZE 0x0000ffff /* scatter particle size */ +#define SAFE_PE_PARTCFG_GBURST 0x00030000 /* gather particle burst */ +#define SAFE_PE_PARTCFG_GBURST_2 0x00000000 +#define SAFE_PE_PARTCFG_GBURST_4 0x00010000 +#define SAFE_PE_PARTCFG_GBURST_8 0x00020000 +#define SAFE_PE_PARTCFG_GBURST_16 0x00030000 +#define SAFE_PE_PARTCFG_SBURST 0x000c0000 /* scatter particle burst */ +#define SAFE_PE_PARTCFG_SBURST_2 0x00000000 +#define SAFE_PE_PARTCFG_SBURST_4 0x00040000 +#define SAFE_PE_PARTCFG_SBURST_8 0x00080000 +#define SAFE_PE_PARTCFG_SBURST_16 0x000c0000 + +#define SAFE_PE_PARTSIZE_SCAT 0xffff0000 /* scatter particle ring size */ +#define SAFE_PE_PARTSIZE_GATH 0x0000ffff /* gather particle ring size */ + +#define SAFE_CRYPTO_CTRL_3DES 0x00000001 /* enable 3DES support */ +#define SAFE_CRYPTO_CTRL_PKEY 0x00010000 /* enable public key support */ +#define SAFE_CRYPTO_CTRL_RNG 0x00020000 /* enable RNG support */ + +#define SAFE_DEVINFO_REV_MIN 0x0000000f /* minor rev for chip */ +#define SAFE_DEVINFO_REV_MAJ 0x000000f0 /* major rev for chip */ +#define SAFE_DEVINFO_REV_MAJ_S 4 +#define SAFE_DEVINFO_DES 0x00000100 /* DES/3DES support present */ +#define SAFE_DEVINFO_ARC4 0x00000200 /* ARC4 support present */ +#define SAFE_DEVINFO_AES 0x00000400 /* AES support present */ +#define SAFE_DEVINFO_MD5 0x00001000 /* MD5 support present */ +#define SAFE_DEVINFO_SHA1 0x00002000 /* SHA-1 support present */ +#define SAFE_DEVINFO_RIPEMD 0x00004000 /* RIPEMD support present */ +#define SAFE_DEVINFO_DEFLATE 0x00010000 /* Deflate support present */ +#define SAFE_DEVINFO_SARAM 0x00100000 /* on-chip SA RAM present */ +#define SAFE_DEVINFO_EMIBUS 0x00200000 /* EMI bus present */ +#define SAFE_DEVINFO_PKEY 0x00400000 /* public key support present */ +#define SAFE_DEVINFO_RNG 0x00800000 /* RNG present */ + +#define SAFE_REV(_maj, _min) (((_maj) << SAFE_DEVINFO_REV_MAJ_S) | (_min)) +#define SAFE_REV_MAJ(_chiprev) \ + (((_chiprev) & SAFE_DEVINFO_REV_MAJ) >> SAFE_DEVINFO_REV_MAJ_S) +#define SAFE_REV_MIN(_chiprev) ((_chiprev) & SAFE_DEVINFO_REV_MIN) + +#define SAFE_PK_FUNC_MULT 0x00000001 /* Multiply function */ +#define SAFE_PK_FUNC_SQUARE 0x00000004 /* Square function */ +#define SAFE_PK_FUNC_ADD 0x00000010 /* Add function */ +#define SAFE_PK_FUNC_SUB 0x00000020 /* Subtract function */ +#define SAFE_PK_FUNC_LSHIFT 0x00000040 /* Left-shift function */ +#define SAFE_PK_FUNC_RSHIFT 0x00000080 /* Right-shift function */ +#define SAFE_PK_FUNC_DIV 0x00000100 /* Divide function */ +#define SAFE_PK_FUNC_CMP 0x00000400 /* Compare function */ +#define SAFE_PK_FUNC_COPY 0x00000800 /* Copy function */ +#define SAFE_PK_FUNC_EXP16 0x00002000 /* Exponentiate (4-bit ACT) */ +#define SAFE_PK_FUNC_EXP4 0x00004000 /* Exponentiate (2-bit ACT) */ +#define SAFE_PK_FUNC_RUN 0x00008000 /* start/status */ + +#define SAFE_RNG_STAT_BUSY 0x00000001 /* busy, data not valid */ + +#define SAFE_RNG_CTRL_PRE_LFSR 0x00000001 /* enable output pre-LFSR */ +#define SAFE_RNG_CTRL_TST_MODE 0x00000002 /* enable test mode */ +#define SAFE_RNG_CTRL_TST_RUN 0x00000004 /* start test state machine */ +#define SAFE_RNG_CTRL_ENA_RING1 0x00000008 /* test entropy oscillator #1 */ +#define SAFE_RNG_CTRL_ENA_RING2 0x00000010 /* test entropy oscillator #2 */ +#define SAFE_RNG_CTRL_DIS_ALARM 0x00000020 /* disable RNG alarm reports */ +#define SAFE_RNG_CTRL_TST_CLOCK 0x00000040 /* enable test clock */ +#define SAFE_RNG_CTRL_SHORTEN 0x00000080 /* shorten state timers */ +#define SAFE_RNG_CTRL_TST_ALARM 0x00000100 /* simulate alarm state */ +#define SAFE_RNG_CTRL_RST_LFSR 0x00000200 /* reset LFSR */ + +/* + * Packet engine descriptor. Note that d_csr is a copy of the + * SAFE_PE_CSR register and all definitions apply, and d_len + * is a copy of the SAFE_PE_LEN register and all definitions apply. + * d_src and d_len may point directly to contiguous data or to a + * list of ``particle descriptors'' when using scatter/gather i/o. + */ +struct safe_desc { + u_int32_t d_csr; /* per-packet control/status */ + u_int32_t d_src; /* source address */ + u_int32_t d_dst; /* destination address */ + u_int32_t d_sa; /* SA address */ + u_int32_t d_len; /* length, bypass, status */ +}; + +/* + * Scatter/Gather particle descriptor. + * + * NB: scatter descriptors do not specify a size; this is fixed + * by the setting of the SAFE_PE_PARTCFG register. + */ +struct safe_pdesc { + u_int32_t pd_addr; /* particle address */ +#ifdef __BIG_ENDIAN + u_int16_t pd_flags; /* control word */ + u_int16_t pd_size; /* particle size (bytes) */ +#else + u_int16_t pd_flags; /* control word */ + u_int16_t pd_size; /* particle size (bytes) */ +#endif +}; + +#define SAFE_PD_READY 0x0001 /* ready for processing */ +#define SAFE_PD_DONE 0x0002 /* h/w completed processing */ + +/* + * Security Association (SA) Record (Rev 1). One of these is + * required for each operation processed by the packet engine. + */ +struct safe_sarec { + u_int32_t sa_cmd0; + u_int32_t sa_cmd1; + u_int32_t sa_resv0; + u_int32_t sa_resv1; + u_int32_t sa_key[8]; /* DES/3DES/AES key */ + u_int32_t sa_indigest[5]; /* inner digest */ + u_int32_t sa_outdigest[5]; /* outer digest */ + u_int32_t sa_spi; /* SPI */ + u_int32_t sa_seqnum; /* sequence number */ + u_int32_t sa_seqmask[2]; /* sequence number mask */ + u_int32_t sa_resv2; + u_int32_t sa_staterec; /* address of state record */ + u_int32_t sa_resv3[2]; + u_int32_t sa_samgmt0; /* SA management field 0 */ + u_int32_t sa_samgmt1; /* SA management field 0 */ +}; + +#define SAFE_SA_CMD0_OP 0x00000007 /* operation code */ +#define SAFE_SA_CMD0_OP_CRYPT 0x00000000 /* encrypt/decrypt (basic) */ +#define SAFE_SA_CMD0_OP_BOTH 0x00000001 /* encrypt-hash/hash-decrypto */ +#define SAFE_SA_CMD0_OP_HASH 0x00000003 /* hash (outbound-only) */ +#define SAFE_SA_CMD0_OP_ESP 0x00000000 /* ESP in/out (proto) */ +#define SAFE_SA_CMD0_OP_AH 0x00000001 /* AH in/out (proto) */ +#define SAFE_SA_CMD0_INBOUND 0x00000008 /* inbound operation */ +#define SAFE_SA_CMD0_OUTBOUND 0x00000000 /* outbound operation */ +#define SAFE_SA_CMD0_GROUP 0x00000030 /* operation group */ +#define SAFE_SA_CMD0_BASIC 0x00000000 /* basic operation */ +#define SAFE_SA_CMD0_PROTO 0x00000010 /* protocol/packet operation */ +#define SAFE_SA_CMD0_BUNDLE 0x00000020 /* bundled operation (resvd) */ +#define SAFE_SA_CMD0_PAD 0x000000c0 /* crypto pad method */ +#define SAFE_SA_CMD0_PAD_IPSEC 0x00000000 /* IPsec padding */ +#define SAFE_SA_CMD0_PAD_PKCS7 0x00000040 /* PKCS#7 padding */ +#define SAFE_SA_CMD0_PAD_CONS 0x00000080 /* constant padding */ +#define SAFE_SA_CMD0_PAD_ZERO 0x000000c0 /* zero padding */ +#define SAFE_SA_CMD0_CRYPT_ALG 0x00000f00 /* symmetric crypto algorithm */ +#define SAFE_SA_CMD0_DES 0x00000000 /* DES crypto algorithm */ +#define SAFE_SA_CMD0_3DES 0x00000100 /* 3DES crypto algorithm */ +#define SAFE_SA_CMD0_AES 0x00000300 /* AES crypto algorithm */ +#define SAFE_SA_CMD0_CRYPT_NULL 0x00000f00 /* null crypto algorithm */ +#define SAFE_SA_CMD0_HASH_ALG 0x0000f000 /* hash algorithm */ +#define SAFE_SA_CMD0_MD5 0x00000000 /* MD5 hash algorithm */ +#define SAFE_SA_CMD0_SHA1 0x00001000 /* SHA-1 hash algorithm */ +#define SAFE_SA_CMD0_HASH_NULL 0x0000f000 /* null hash algorithm */ +#define SAFE_SA_CMD0_HDR_PROC 0x00080000 /* header processing */ +#define SAFE_SA_CMD0_IBUSID 0x00300000 /* input bus id */ +#define SAFE_SA_CMD0_IPCI 0x00100000 /* PCI input bus id */ +#define SAFE_SA_CMD0_OBUSID 0x00c00000 /* output bus id */ +#define SAFE_SA_CMD0_OPCI 0x00400000 /* PCI output bus id */ +#define SAFE_SA_CMD0_IVLD 0x03000000 /* IV loading */ +#define SAFE_SA_CMD0_IVLD_NONE 0x00000000 /* IV no load (reuse) */ +#define SAFE_SA_CMD0_IVLD_IBUF 0x01000000 /* IV load from input buffer */ +#define SAFE_SA_CMD0_IVLD_STATE 0x02000000 /* IV load from state */ +#define SAFE_SA_CMD0_HSLD 0x0c000000 /* hash state loading */ +#define SAFE_SA_CMD0_HSLD_SA 0x00000000 /* hash state load from SA */ +#define SAFE_SA_CMD0_HSLD_STATE 0x08000000 /* hash state load from state */ +#define SAFE_SA_CMD0_HSLD_NONE 0x0c000000 /* hash state no load */ +#define SAFE_SA_CMD0_SAVEIV 0x10000000 /* save IV */ +#define SAFE_SA_CMD0_SAVEHASH 0x20000000 /* save hash state */ +#define SAFE_SA_CMD0_IGATHER 0x40000000 /* input gather */ +#define SAFE_SA_CMD0_OSCATTER 0x80000000 /* output scatter */ + +#define SAFE_SA_CMD1_HDRCOPY 0x00000002 /* copy header to output */ +#define SAFE_SA_CMD1_PAYCOPY 0x00000004 /* copy payload to output */ +#define SAFE_SA_CMD1_PADCOPY 0x00000008 /* copy pad to output */ +#define SAFE_SA_CMD1_IPV4 0x00000000 /* IPv4 protocol */ +#define SAFE_SA_CMD1_IPV6 0x00000010 /* IPv6 protocol */ +#define SAFE_SA_CMD1_MUTABLE 0x00000020 /* mutable bit processing */ +#define SAFE_SA_CMD1_SRBUSID 0x000000c0 /* state record bus id */ +#define SAFE_SA_CMD1_SRPCI 0x00000040 /* state record from PCI */ +#define SAFE_SA_CMD1_CRMODE 0x00000300 /* crypto mode */ +#define SAFE_SA_CMD1_ECB 0x00000000 /* ECB crypto mode */ +#define SAFE_SA_CMD1_CBC 0x00000100 /* CBC crypto mode */ +#define SAFE_SA_CMD1_OFB 0x00000200 /* OFB crypto mode */ +#define SAFE_SA_CMD1_CFB 0x00000300 /* CFB crypto mode */ +#define SAFE_SA_CMD1_CRFEEDBACK 0x00000c00 /* crypto feedback mode */ +#define SAFE_SA_CMD1_64BIT 0x00000000 /* 64-bit crypto feedback */ +#define SAFE_SA_CMD1_8BIT 0x00000400 /* 8-bit crypto feedback */ +#define SAFE_SA_CMD1_1BIT 0x00000800 /* 1-bit crypto feedback */ +#define SAFE_SA_CMD1_128BIT 0x00000c00 /* 128-bit crypto feedback */ +#define SAFE_SA_CMD1_OPTIONS 0x00001000 /* HMAC/options mutable bit */ +#define SAFE_SA_CMD1_HMAC SAFE_SA_CMD1_OPTIONS +#define SAFE_SA_CMD1_SAREV1 0x00008000 /* SA Revision 1 */ +#define SAFE_SA_CMD1_OFFSET 0x00ff0000 /* hash/crypto offset(dwords) */ +#define SAFE_SA_CMD1_OFFSET_S 16 +#define SAFE_SA_CMD1_AESKEYLEN 0x0f000000 /* AES key length */ +#define SAFE_SA_CMD1_AES128 0x02000000 /* 128-bit AES key */ +#define SAFE_SA_CMD1_AES192 0x03000000 /* 192-bit AES key */ +#define SAFE_SA_CMD1_AES256 0x04000000 /* 256-bit AES key */ + +/* + * Security Associate State Record (Rev 1). + */ +struct safe_sastate { + u_int32_t sa_saved_iv[4]; /* saved IV (DES/3DES/AES) */ + u_int32_t sa_saved_hashbc; /* saved hash byte count */ + u_int32_t sa_saved_indigest[5]; /* saved inner digest */ +}; +#endif /* _SAFE_SAFEREG_H_ */ -- cgit v1.2.3