From 40b344028b6b043b73512f036be7b3e963f85c88 Mon Sep 17 00:00:00 2001 From: jow Date: Tue, 4 May 2010 20:59:19 +0000 Subject: [generic-2.6] update OCF framework to version 20100325 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21356 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.c | 1047 ++++++++++++++++++++ .../crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h | 185 ++++ .../ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h | 411 ++++++++ 3 files changed, 1643 insertions(+) create mode 100644 target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.c create mode 100644 target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h create mode 100644 target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h (limited to 'target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci') diff --git a/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.c b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.c new file mode 100644 index 000000000..4a087343d --- /dev/null +++ b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.c @@ -0,0 +1,1047 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +#include "pci/mvPci.h" + +#include "ctrlEnv/mvCtrlEnvLib.h" + +/* defines */ +#ifdef MV_DEBUG + #define DB(x) x +#else + #define DB(x) +#endif + + + +MV_VOID mvPciHalInit(MV_U32 pciIf, MV_PCI_MOD pciIfmod) +{ + if (MV_PCI_MOD_HOST == pciIfmod) + { + + mvPciLocalBusNumSet(pciIf, PCI_HOST_BUS_NUM(pciIf)); + mvPciLocalDevNumSet(pciIf, PCI_HOST_DEV_NUM(pciIf)); + + /* Local device master Enable */ + mvPciMasterEnable(pciIf, MV_TRUE); + + /* Local device slave Enable */ + mvPciSlaveEnable(pciIf, mvPciLocalBusNumGet(pciIf), + mvPciLocalDevNumGet(pciIf), MV_TRUE); + } + /* enable CPU-2-PCI ordering */ + MV_REG_BIT_SET(PCI_CMD_REG(0), PCR_CPU_TO_PCI_ORDER_EN); +} + +/******************************************************************************* +* mvPciCommandSet - Set PCI comman register value. +* +* DESCRIPTION: +* This function sets a given PCI interface with its command register +* value. +* +* INPUT: +* pciIf - PCI interface number. +* command - 32bit value to be written to comamnd register. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM if pciIf is not in range otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciCommandSet(MV_U32 pciIf, MV_U32 command) +{ + MV_U32 locBusNum, locDevNum, regVal; + + locBusNum = mvPciLocalBusNumGet(pciIf); + locDevNum = mvPciLocalDevNumGet(pciIf); + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciCommandSet: ERR. Invalid PCI IF num %d\n", pciIf); + return MV_BAD_PARAM; + } + + /* Set command register */ + MV_REG_WRITE(PCI_CMD_REG(pciIf), command); + + /* Upodate device max outstanding split tarnsaction */ + if ((command & PCR_CPU_TO_PCI_ORDER_EN) && + (command & PCR_PCI_TO_CPU_ORDER_EN)) + { + /* Read PCI-X command register */ + regVal = mvPciConfigRead (pciIf, locBusNum, locDevNum, 0, PCIX_COMMAND); + + /* clear bits 22:20 */ + regVal &= 0xff8fffff; + + /* set reset value */ + regVal |= (0x3 << 20); + + /* Write back the value */ + mvPciConfigWrite (pciIf, locBusNum, locDevNum, 0, PCIX_COMMAND, regVal); + } + + return MV_OK; + + +} + + +/******************************************************************************* +* mvPciModeGet - Get PCI interface mode. +* +* DESCRIPTION: +* This function returns the given PCI interface mode. +* +* INPUT: +* pciIf - PCI interface number. +* +* OUTPUT: +* pPciMode - Pointer to PCI mode structure. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciModeGet(MV_U32 pciIf, MV_PCI_MODE *pPciMode) +{ + MV_U32 pciMode; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciModeGet: ERR. Invalid PCI interface %d\n", pciIf); + return MV_BAD_PARAM; + } + if (NULL == pPciMode) + { + mvOsPrintf("mvPciModeGet: ERR. pPciMode = NULL \n"); + return MV_BAD_PARAM; + } + + /* Read pci mode register */ + pciMode = MV_REG_READ(PCI_MODE_REG(pciIf)); + + switch (pciMode & PMR_PCI_MODE_MASK) + { + case PMR_PCI_MODE_CONV: + pPciMode->pciType = MV_PCI_CONV; + + if (MV_REG_READ(PCI_DLL_CTRL_REG(pciIf)) & PDC_DLL_EN) + { + pPciMode->pciSpeed = 66000000; /* 66MHZ */ + } + else + { + pPciMode->pciSpeed = 33000000; /* 33MHZ */ + } + + break; + + case PMR_PCI_MODE_PCIX_66MHZ: + pPciMode->pciType = MV_PCIX; + pPciMode->pciSpeed = 66000000; /* 66MHZ */ + break; + + case PMR_PCI_MODE_PCIX_100MHZ: + pPciMode->pciType = MV_PCIX; + pPciMode->pciSpeed = 100000000; /* 100MHZ */ + break; + + case PMR_PCI_MODE_PCIX_133MHZ: + pPciMode->pciType = MV_PCIX; + pPciMode->pciSpeed = 133000000; /* 133MHZ */ + break; + + default: + { + mvOsPrintf("mvPciModeGet: ERR. Non existing mode !!\n"); + return MV_ERROR; + } + } + + switch (pciMode & PMR_PCI_64_MASK) + { + case PMR_PCI_64_64BIT: + pPciMode->pciWidth = MV_PCI_64; + break; + + case PMR_PCI_64_32BIT: + pPciMode->pciWidth = MV_PCI_32; + break; + + default: + { + mvOsPrintf("mvPciModeGet: ERR. Non existing mode !!\n"); + return MV_ERROR; + } + } + + return MV_OK; +} + +/******************************************************************************* +* mvPciRetrySet - Set PCI retry counters +* +* DESCRIPTION: +* This function specifies the number of times the PCI controller +* retries a transaction before it quits. +* Applies to the PCI Master when acting as a requester. +* Applies to the PCI slave when acting as a completer (PCI-X mode). +* A 0x00 value means a "retry forever". +* +* INPUT: +* pciIf - PCI interface number. +* counter - Number of times PCI controller retry. Use counter value +* up to PRR_RETRY_CNTR_MAX. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciRetrySet(MV_U32 pciIf, MV_U32 counter) +{ + MV_U32 pciRetry; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciRetrySet: ERR. Invalid PCI interface %d\n", pciIf); + return MV_BAD_PARAM; + } + + if (counter >= PRR_RETRY_CNTR_MAX) + { + mvOsPrintf("mvPciRetrySet: ERR. Invalid counter: %d\n", counter); + return MV_BAD_PARAM; + + } + + /* Reading PCI retry register */ + pciRetry = MV_REG_READ(PCI_RETRY_REG(pciIf)); + + pciRetry &= ~PRR_RETRY_CNTR_MASK; + + pciRetry |= (counter << PRR_RETRY_CNTR_OFFS); + + /* write new value */ + MV_REG_WRITE(PCI_RETRY_REG(pciIf), pciRetry); + + return MV_OK; +} + + +/******************************************************************************* +* mvPciDiscardTimerSet - Set PCI discard timer +* +* DESCRIPTION: +* This function set PCI discard timer. +* In conventional PCI mode: +* Specifies the number of PCLK cycles the PCI slave keeps a non-accessed +* read buffers (non-completed delayed read) before invalidate the buffer. +* Set to '0' to disable the timer. The PCI slave waits for delayed +* read completion forever. +* In PCI-X mode: +* Specifies the number of PCLK cycles the PCI master waits for split +* completion transaction, before it invalidates the pre-allocated read +* buffer. +* Set to '0' to disable the timer. The PCI master waits for split +* completion forever. +* NOTE: Must be set to a number greater than MV_PCI_MAX_DISCARD_CLK, +* unless using the "wait for ever" setting 0x0. +* NOTE: Must not be updated while there are pending read requests. +* +* INPUT: +* pciIf - PCI interface number. +* pClkCycles - Number of PCI clock cycles. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciDiscardTimerSet(MV_U32 pciIf, MV_U32 pClkCycles) +{ + MV_U32 pciDiscardTimer; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciDiscardTimerSet: ERR. Invalid PCI interface %d\n", + pciIf); + return MV_BAD_PARAM; + } + + if (pClkCycles >= PDTR_TIMER_MIN) + { + mvOsPrintf("mvPciDiscardTimerSet: ERR. Invalid Clk value: %d\n", + pClkCycles); + return MV_BAD_PARAM; + + } + + /* Read PCI Discard Timer */ + pciDiscardTimer = MV_REG_READ(PCI_DISCARD_TIMER_REG(pciIf)); + + pciDiscardTimer &= ~PDTR_TIMER_MASK; + + pciDiscardTimer |= (pClkCycles << PDTR_TIMER_OFFS); + + /* Write new value */ + MV_REG_WRITE(PCI_DISCARD_TIMER_REG(pciIf), pciDiscardTimer); + + return MV_OK; + +} + +/* PCI Arbiter routines */ + +/******************************************************************************* +* mvPciArbEnable - PCI arbiter enable/disable +* +* DESCRIPTION: +* This fuction enable/disables a given PCI interface arbiter. +* NOTE: Arbiter setting can not be changed while in work. It should only +* be set once. +* INPUT: +* pciIf - PCI interface number. +* enable - Enable/disable parameter. If enable = MV_TRUE then enable. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_STATUS mvPciArbEnable(MV_U32 pciIf, MV_BOOL enable) +{ + MV_U32 regVal; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciArbEnable: ERR. Invalid PCI interface %d\n", pciIf); + return MV_ERROR; + } + + /* Set PCI Arbiter Control register according to default configuration */ + regVal = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf)); + + /* Make sure arbiter disabled before changing its values */ + MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE); + + regVal &= ~PCI_ARBITER_CTRL_DEFAULT_MASK; + + regVal |= PCI_ARBITER_CTRL_DEFAULT; /* Set default configuration */ + + if (MV_TRUE == enable) + { + regVal |= PACR_ARB_ENABLE; + } + else + { + regVal &= ~PACR_ARB_ENABLE; + } + + /* Write to register */ + MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), regVal); + + return MV_OK; +} + + +/******************************************************************************* +* mvPciArbParkDis - Disable arbiter parking on agent +* +* DESCRIPTION: +* This function disables the PCI arbiter from parking on the given agent +* list. +* +* INPUT: +* pciIf - PCI interface number. +* pciAgentMask - When a bit in the mask is set to '1', parking on +* the associated PCI master is disabled. Mask bit +* refers to bit 0 - 6. For example disable parking on PCI +* agent 3 set pciAgentMask 0x4 (bit 3 is set). +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_STATUS mvPciArbParkDis(MV_U32 pciIf, MV_U32 pciAgentMask) +{ + MV_U32 pciArbiterCtrl; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciArbParkDis: ERR. Invalid PCI interface %d\n", pciIf); + return MV_ERROR; + } + + /* Reading Arbiter Control register */ + pciArbiterCtrl = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf)); + + /* Arbiter must be disabled before changing parking */ + MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE); + + /* do the change */ + pciArbiterCtrl &= ~PACR_PARK_DIS_MASK; + pciArbiterCtrl |= (pciAgentMask << PACR_PARK_DIS_OFFS); + + /* writing new value ( if th earbiter was enabled before the change */ + /* here it will be reenabled */ + MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), pciArbiterCtrl); + + return MV_OK; +} + + +/******************************************************************************* +* mvPciArbBrokDetectSet - Set PCI arbiter broken detection +* +* DESCRIPTION: +* This function sets the maximum number of cycles that the arbiter +* waits for a PCI master to respond to its grant assertion. If a +* PCI agent fails to respond within this time, the PCI arbiter aborts +* the transaction and performs a new arbitration cycle. +* NOTE: Value must be greater than '1' for conventional PCI and +* greater than '5' for PCI-X. +* +* INPUT: +* pciIf - PCI interface number. +* pClkCycles - Number of PCI clock cycles. If equal to '0' the broken +* master detection is disabled. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciArbBrokDetectSet(MV_U32 pciIf, MV_U32 pClkCycles) +{ + MV_U32 pciArbiterCtrl; + MV_U32 pciMode; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciArbBrokDetectSet: ERR. Invalid PCI interface %d\n", + pciIf); + return MV_BAD_PARAM; + } + + /* Checking PCI mode and if pClkCycles is legal value */ + pciMode = MV_REG_READ(PCI_MODE_REG(pciIf)); + pciMode &= PMR_PCI_MODE_MASK; + + if (PMR_PCI_MODE_CONV == pciMode) + { + if (pClkCycles < PACR_BROKEN_VAL_CONV_MIN) + return MV_ERROR; + } + else + { + if (pClkCycles < PACR_BROKEN_VAL_PCIX_MIN) + return MV_ERROR; + } + + pClkCycles <<= PACR_BROKEN_VAL_OFFS; + + /* Reading Arbiter Control register */ + pciArbiterCtrl = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf)); + pciArbiterCtrl &= ~PACR_BROKEN_VAL_MASK; + pciArbiterCtrl |= pClkCycles; + + /* Arbiter must be disabled before changing broken detection */ + MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE); + + /* writing new value ( if th earbiter was enabled before the change */ + /* here it will be reenabled */ + + MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), pciArbiterCtrl); + + return MV_OK; +} + +/* PCI configuration space read write */ + +/******************************************************************************* +* mvPciConfigRead - Read from configuration space +* +* DESCRIPTION: +* This function performs a 32 bit read from PCI configuration space. +* It supports both type 0 and type 1 of Configuration Transactions +* (local and over bridge). In order to read from local bus segment, use +* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers +* will result configuration transaction of type 1 (over bridge). +* +* INPUT: +* pciIf - PCI interface number. +* bus - PCI segment bus number. +* dev - PCI device number. +* func - Function number. +* regOffs - Register offset. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit register data, 0xffffffff on error +* +*******************************************************************************/ +MV_U32 mvPciConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_U32 func, + MV_U32 regOff) +{ + MV_U32 pciData = 0; + + /* Parameter checking */ + if (PCI_DEFAULT_IF != pciIf) + { + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciConfigRead: ERR. Invalid PCI interface %d\n",pciIf); + return 0xFFFFFFFF; + } + } + + if (dev >= MAX_PCI_DEVICES) + { + DB(mvOsPrintf("mvPciConfigRead: ERR. device number illigal %d\n", dev)); + return 0xFFFFFFFF; + } + + if (func >= MAX_PCI_FUNCS) + { + DB(mvOsPrintf("mvPciConfigRead: ERR. function number illigal %d\n", func)); + return 0xFFFFFFFF; + } + + if (bus >= MAX_PCI_BUSSES) + { + DB(mvOsPrintf("mvPciConfigRead: ERR. bus number illigal %d\n", bus)); + return MV_ERROR; + } + + + /* Creating PCI address to be passed */ + pciData |= (bus << PCAR_BUS_NUM_OFFS); + pciData |= (dev << PCAR_DEVICE_NUM_OFFS); + pciData |= (func << PCAR_FUNC_NUM_OFFS); + pciData |= (regOff & PCAR_REG_NUM_MASK); + + pciData |= PCAR_CONFIG_EN; + + /* Write the address to the PCI configuration address register */ + MV_REG_WRITE(PCI_CONFIG_ADDR_REG(pciIf), pciData); + + /* In order to let the PCI controller absorbed the address of the read */ + /* transaction we perform a validity check that the address was written */ + if(pciData != MV_REG_READ(PCI_CONFIG_ADDR_REG(pciIf))) + { + return MV_ERROR; + } + /* Read the Data returned in the PCI Data register */ + pciData = MV_REG_READ(PCI_CONFIG_DATA_REG(pciIf)); + + return pciData; +} + +/******************************************************************************* +* mvPciConfigWrite - Write to configuration space +* +* DESCRIPTION: +* This function performs a 32 bit write to PCI configuration space. +* It supports both type 0 and type 1 of Configuration Transactions +* (local and over bridge). In order to write to local bus segment, use +* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers +* will result configuration transaction of type 1 (over bridge). +* +* INPUT: +* pciIf - PCI interface number. +* bus - PCI segment bus number. +* dev - PCI device number. +* func - Function number. +* regOffs - Register offset. +* data - 32bit data. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data) +{ + MV_U32 pciData = 0; + + /* Parameter checking */ + if (PCI_DEFAULT_IF != pciIf) + { + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciConfigWrite: ERR. Invalid PCI interface %d\n", + pciIf); + return 0xFFFFFFFF; + } + } + + if (dev >= MAX_PCI_DEVICES) + { + mvOsPrintf("mvPciConfigWrite: ERR. device number illigal %d\n",dev); + return MV_BAD_PARAM; + } + + if (func >= MAX_PCI_FUNCS) + { + mvOsPrintf("mvPciConfigWrite: ERR. function number illigal %d\n", func); + return MV_ERROR; + } + + if (bus >= MAX_PCI_BUSSES) + { + mvOsPrintf("mvPciConfigWrite: ERR. bus number illigal %d\n", bus); + return MV_ERROR; + } + + /* Creating PCI address to be passed */ + pciData |= (bus << PCAR_BUS_NUM_OFFS); + pciData |= (dev << PCAR_DEVICE_NUM_OFFS); + pciData |= (func << PCAR_FUNC_NUM_OFFS); + pciData |= (regOff & PCAR_REG_NUM_MASK); + + pciData |= PCAR_CONFIG_EN; + + /* Write the address to the PCI configuration address register */ + MV_REG_WRITE(PCI_CONFIG_ADDR_REG(pciIf), pciData); + + /* In order to let the PCI controller absorbed the address of the read */ + /* transaction we perform a validity check that the address was written */ + if(pciData != MV_REG_READ(PCI_CONFIG_ADDR_REG(pciIf))) + { + return MV_ERROR; + } + + /* Write the Data passed to the PCI Data register */ + MV_REG_WRITE(PCI_CONFIG_DATA_REG(pciIf), data); + + return MV_OK; +} + +/******************************************************************************* +* mvPciMasterEnable - Enable/disale PCI interface master transactions. +* +* DESCRIPTION: +* This function performs read modified write to PCI command status +* (offset 0x4) to set/reset bit 2. After this bit is set, the PCI +* master is allowed to gain ownership on the bus, otherwise it is +* incapable to do so. +* +* INPUT: +* pciIf - PCI interface number. +* enable - Enable/disable parameter. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciMasterEnable(MV_U32 pciIf, MV_BOOL enable) +{ + MV_U32 pciCommandStatus; + MV_U32 RegOffs; + MV_U32 localBus; + MV_U32 localDev; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciMasterEnable: ERR. Invalid PCI interface %d\n", pciIf); + return MV_ERROR; + } + + localBus = mvPciLocalBusNumGet(pciIf); + localDev = mvPciLocalDevNumGet(pciIf); + + RegOffs = PCI_STATUS_AND_COMMAND; + + pciCommandStatus = mvPciConfigRead(pciIf, localBus, localDev, 0, RegOffs); + + if (MV_TRUE == enable) + { + pciCommandStatus |= PSCR_MASTER_EN; + } + else + { + pciCommandStatus &= ~PSCR_MASTER_EN; + } + + mvPciConfigWrite(pciIf, localBus, localDev, 0, RegOffs, pciCommandStatus); + + return MV_OK; +} + + +/******************************************************************************* +* mvPciSlaveEnable - Enable/disale PCI interface slave transactions. +* +* DESCRIPTION: +* This function performs read modified write to PCI command status +* (offset 0x4) to set/reset bit 0 and 1. After those bits are set, +* the PCI slave is allowed to respond to PCI IO space access (bit 0) +* and PCI memory space access (bit 1). +* +* INPUT: +* pciIf - PCI interface number. +* dev - PCI device number. +* enable - Enable/disable parameter. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciSlaveEnable(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_BOOL enable) +{ + MV_U32 pciCommandStatus; + MV_U32 RegOffs; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciSlaveEnable: ERR. Invalid PCI interface %d\n", pciIf); + return MV_BAD_PARAM; + } + if (dev >= MAX_PCI_DEVICES) + { + mvOsPrintf("mvPciLocalDevNumSet: ERR. device number illigal %d\n", dev); + return MV_BAD_PARAM; + + } + + RegOffs = PCI_STATUS_AND_COMMAND; + + pciCommandStatus=mvPciConfigRead(pciIf, bus, dev, 0, RegOffs); + + if (MV_TRUE == enable) + { + pciCommandStatus |= (PSCR_IO_EN | PSCR_MEM_EN); + } + else + { + pciCommandStatus &= ~(PSCR_IO_EN | PSCR_MEM_EN); + } + + mvPciConfigWrite(pciIf, bus, dev, 0, RegOffs, pciCommandStatus); + + return MV_OK; +} + +/******************************************************************************* +* mvPciLocalBusNumSet - Set PCI interface local bus number. +* +* DESCRIPTION: +* This function sets given PCI interface its local bus number. +* Note: In case the PCI interface is PCI-X, the information is read-only. +* +* INPUT: +* pciIf - PCI interface number. +* busNum - Bus number. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_NOT_ALLOWED in case PCI interface is PCI-X. +* MV_BAD_PARAM on bad parameters , +* otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum) +{ + MV_U32 pciP2PConfig; + MV_PCI_MODE pciMode; + MV_U32 localBus; + MV_U32 localDev; + + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciLocalBusNumSet: ERR. Invalid PCI interface %d\n",pciIf); + return MV_BAD_PARAM; + } + if (busNum >= MAX_PCI_BUSSES) + { + mvOsPrintf("mvPciLocalBusNumSet: ERR. bus number illigal %d\n", busNum); + return MV_ERROR; + + } + + localBus = mvPciLocalBusNumGet(pciIf); + localDev = mvPciLocalDevNumGet(pciIf); + + + /* PCI interface mode */ + mvPciModeGet(pciIf, &pciMode); + + /* if PCI type is PCI-X then it is not allowed to change the dev number */ + if (MV_PCIX == pciMode.pciType) + { + pciP2PConfig = mvPciConfigRead(pciIf, localBus, localDev, 0, PCIX_STATUS ); + + pciP2PConfig &= ~PXS_BN_MASK; + + pciP2PConfig |= (busNum << PXS_BN_OFFS) & PXS_BN_MASK; + + mvPciConfigWrite(pciIf, localBus, localDev, 0, PCIX_STATUS,pciP2PConfig ); + + } + else + { + pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf)); + + pciP2PConfig &= ~PPCR_BUS_NUM_MASK; + + pciP2PConfig |= (busNum << PPCR_BUS_NUM_OFFS) & PPCR_BUS_NUM_MASK; + + MV_REG_WRITE(PCI_P2P_CONFIG_REG(pciIf), pciP2PConfig); + + } + + + return MV_OK; +} + + +/******************************************************************************* +* mvPciLocalBusNumGet - Get PCI interface local bus number. +* +* DESCRIPTION: +* This function gets the local bus number of a given PCI interface. +* +* INPUT: +* pciIf - PCI interface number. +* +* OUTPUT: +* None. +* +* RETURN: +* Local bus number.0xffffffff on Error +* +*******************************************************************************/ +MV_U32 mvPciLocalBusNumGet(MV_U32 pciIf) +{ + MV_U32 pciP2PConfig; + + /* Parameter checking */ + if (PCI_DEFAULT_IF != pciIf) + { + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciLocalBusNumGet: ERR. Invalid PCI interface %d\n", + pciIf); + return 0xFFFFFFFF; + } + } + + pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf)); + pciP2PConfig &= PPCR_BUS_NUM_MASK; + return (pciP2PConfig >> PPCR_BUS_NUM_OFFS); +} + + +/******************************************************************************* +* mvPciLocalDevNumSet - Set PCI interface local device number. +* +* DESCRIPTION: +* This function sets given PCI interface its local device number. +* Note: In case the PCI interface is PCI-X, the information is read-only. +* +* INPUT: +* pciIf - PCI interface number. +* devNum - Device number. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_NOT_ALLOWED in case PCI interface is PCI-X. MV_BAD_PARAM on bad parameters , +* otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum) +{ + MV_U32 pciP2PConfig; + MV_PCI_MODE pciMode; + MV_U32 localBus; + MV_U32 localDev; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciLocalDevNumSet: ERR. Invalid PCI interface %d\n",pciIf); + return MV_BAD_PARAM; + } + if (devNum >= MAX_PCI_DEVICES) + { + mvOsPrintf("mvPciLocalDevNumSet: ERR. device number illigal %d\n", + devNum); + return MV_BAD_PARAM; + + } + + localBus = mvPciLocalBusNumGet(pciIf); + localDev = mvPciLocalDevNumGet(pciIf); + + /* PCI interface mode */ + mvPciModeGet(pciIf, &pciMode); + + /* if PCI type is PCIX then it is not allowed to change the dev number */ + if (MV_PCIX == pciMode.pciType) + { + pciP2PConfig = mvPciConfigRead(pciIf, localBus, localDev, 0, PCIX_STATUS ); + + pciP2PConfig &= ~PXS_DN_MASK; + + pciP2PConfig |= (devNum << PXS_DN_OFFS) & PXS_DN_MASK; + + mvPciConfigWrite(pciIf,localBus, localDev, 0, PCIX_STATUS,pciP2PConfig ); + } + else + { + pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf)); + + pciP2PConfig &= ~PPCR_DEV_NUM_MASK; + + pciP2PConfig |= (devNum << PPCR_DEV_NUM_OFFS) & PPCR_DEV_NUM_MASK; + + MV_REG_WRITE(PCI_P2P_CONFIG_REG(pciIf), pciP2PConfig); + } + + return MV_OK; +} + +/******************************************************************************* +* mvPciLocalDevNumGet - Get PCI interface local device number. +* +* DESCRIPTION: +* This function gets the local device number of a given PCI interface. +* +* INPUT: +* pciIf - PCI interface number. +* +* OUTPUT: +* None. +* +* RETURN: +* Local device number. 0xffffffff on Error +* +*******************************************************************************/ +MV_U32 mvPciLocalDevNumGet(MV_U32 pciIf) +{ + MV_U32 pciP2PConfig; + + /* Parameter checking */ + + if (PCI_DEFAULT_IF != pciIf) + { + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciLocalDevNumGet: ERR. Invalid PCI interface %d\n", + pciIf); + return 0xFFFFFFFF; + } + } + + pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf)); + + pciP2PConfig &= PPCR_DEV_NUM_MASK; + + return (pciP2PConfig >> PPCR_DEV_NUM_OFFS); +} + + + + diff --git a/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h new file mode 100644 index 000000000..474633627 --- /dev/null +++ b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h @@ -0,0 +1,185 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCPCIH +#define __INCPCIH + +#include "mvCommon.h" +#include "mvOs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" +#include "pci/mvPciRegs.h" + + +/* NOTE not supported in this driver: + + Built In Self Test (BIST) + Vital Product Data (VPD) + Message Signaled Interrupt (MSI) + Power Management + Compact PCI Hot Swap + Header retarget + +Registers not supported: +1) PCI DLL Status and Control (PCI0 0x1D20, PCI1 0x1DA0) +2) PCI/MPP Pads Calibration (CI0/MPP[31:16] 0x1D1C, PCI1/MPP[15:0] 0X1D9C) +*/ + +/* defines */ +/* The number of supported PCI interfaces depend on Marvell controller */ +/* device number. This device number ID is located on the PCI unit */ +/* configuration header. This creates a loop where calling PCI */ +/* configuration read/write routine results a call to get PCI configuration */ +/* information etc. This macro defines a default PCI interface. This PCI */ +/* interface is sure to exist. */ +#define PCI_DEFAULT_IF 0 + + +/* typedefs */ +/* The Marvell controller supports both conventional PCI and PCI-X. */ +/* This enumeration describes the PCI type. */ +typedef enum _mvPciType +{ + MV_PCI_CONV, /* Conventional PCI */ + MV_PCIX /* PCI-X */ +}MV_PCI_TYPE; + +typedef enum _mvPciMod +{ + MV_PCI_MOD_HOST, + MV_PCI_MOD_DEVICE +}MV_PCI_MOD; + + +/* The Marvell controller supports both PCI width of 32 and 64 bit. */ +/* This enumerator describes PCI width */ +typedef enum _mvPciWidth +{ + MV_PCI_32, /* PCI width 32bit */ + MV_PCI_64 /* PCI width 64bit */ +}MV_PCI_WIDTH; + +/* This structure describes the PCI unit configured type, speed and width. */ +typedef struct _mvPciMode +{ + MV_PCI_TYPE pciType; /* PCI type */ + MV_U32 pciSpeed; /* Assuming PCI base clock on board is 33MHz */ + MV_PCI_WIDTH pciWidth; /* PCI bus width */ +}MV_PCI_MODE; + +/* mvPciInit - Initialize PCI interfaces*/ +MV_VOID mvPciHalInit(MV_U32 pciIf, MV_PCI_MOD pciIfmod); + +/* mvPciCommandSet - Set PCI comman register value.*/ +MV_STATUS mvPciCommandSet(MV_U32 pciIf, MV_U32 command); + +/* mvPciModeGet - Get PCI interface mode.*/ +MV_STATUS mvPciModeGet(MV_U32 pciIf, MV_PCI_MODE *pPciMode); + +/* mvPciRetrySet - Set PCI retry counters*/ +MV_STATUS mvPciRetrySet(MV_U32 pciIf, MV_U32 counter); + +/* mvPciDiscardTimerSet - Set PCI discard timer*/ +MV_STATUS mvPciDiscardTimerSet(MV_U32 pciIf, MV_U32 pClkCycles); + +/* mvPciArbEnable - PCI arbiter enable/disable*/ +MV_STATUS mvPciArbEnable(MV_U32 pciIf, MV_BOOL enable); + +/* mvPciArbParkDis - Disable arbiter parking on agent */ +MV_STATUS mvPciArbParkDis(MV_U32 pciIf, MV_U32 pciAgentMask); + +/* mvPciArbBrokDetectSet - Set PCI arbiter broken detection */ +MV_STATUS mvPciArbBrokDetectSet(MV_U32 pciIf, MV_U32 pClkCycles); + +/* mvPciConfigRead - Read from configuration space */ +MV_U32 mvPciConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, + MV_U32 func,MV_U32 regOff); + +/* mvPciConfigWrite - Write to configuration space */ +MV_STATUS mvPciConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data); + +/* mvPciMasterEnable - Enable/disale PCI interface master transactions.*/ +MV_STATUS mvPciMasterEnable(MV_U32 pciIf, MV_BOOL enable); + +/* mvPciSlaveEnable - Enable/disale PCI interface slave transactions.*/ +MV_STATUS mvPciSlaveEnable(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,MV_BOOL enable); + +/* mvPciLocalBusNumSet - Set PCI interface local bus number.*/ +MV_STATUS mvPciLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum); + +/* mvPciLocalBusNumGet - Get PCI interface local bus number.*/ +MV_U32 mvPciLocalBusNumGet(MV_U32 pciIf); + +/* mvPciLocalDevNumSet - Set PCI interface local device number.*/ +MV_STATUS mvPciLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum); + +/* mvPciLocalDevNumGet - Get PCI interface local device number.*/ +MV_U32 mvPciLocalDevNumGet(MV_U32 pciIf); + + +#endif /* #ifndef __INCPCIH */ + + + diff --git a/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h new file mode 100644 index 000000000..89d0ef12d --- /dev/null +++ b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h @@ -0,0 +1,411 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCPCIREGSH +#define __INCPCIREGSH + + +#include "pci-if/mvPciIfRegs.h" +/* defines */ +#define MAX_PCI_DEVICES 32 +#define MAX_PCI_FUNCS 8 +#define MAX_PCI_BUSSES 128 + +/* enumerators */ + +/* This enumerator described the possible PCI slave targets. */ +/* PCI slave targets are designated memory/IO address spaces that the */ +/* PCI slave targets can access. They are also refered as "targets" */ +/* this enumeratoe order is determined by the content of : + PCI_BASE_ADDR_ENABLE_REG */ + + +/* registers offsetes defines */ + + + +/*************************/ +/* PCI control registers */ +/*************************/ +/* maen : should add new registers */ +#define PCI_CMD_REG(pciIf) (0x30c00 + ((pciIf) * 0x80)) +#define PCI_MODE_REG(pciIf) (0x30d00 + ((pciIf) * 0x80)) +#define PCI_RETRY_REG(pciIf) (0x30c04 + ((pciIf) * 0x80)) +#define PCI_DISCARD_TIMER_REG(pciIf) (0x30d04 + ((pciIf) * 0x80)) +#define PCI_ARBITER_CTRL_REG(pciIf) (0x31d00 + ((pciIf) * 0x80)) +#define PCI_P2P_CONFIG_REG(pciIf) (0x31d14 + ((pciIf) * 0x80)) +#define PCI_ACCESS_CTRL_BASEL_REG(pciIf, targetWin) \ + (0x31e00 + ((pciIf) * 0x80) + ((targetWin) * 0x10)) +#define PCI_ACCESS_CTRL_BASEH_REG(pciIf, targetWin) \ + (0x31e04 + ((pciIf) * 0x80) + ((targetWin) * 0x10)) +#define PCI_ACCESS_CTRL_SIZE_REG(pciIf, targetWin) \ + (0x31e08 + ((pciIf) * 0x80) + ((targetWin) * 0x10)) + +#define PCI_DLL_CTRL_REG(pciIf) (0x31d20 + ((pciIf) * 0x80)) + +/* PCI Dll Control (PDC)*/ +#define PDC_DLL_EN BIT0 + + +/* PCI Command Register (PCR) */ +#define PCR_MASTER_BYTE_SWAP_EN BIT0 +#define PCR_MASTER_WR_COMBINE_EN BIT4 +#define PCR_MASTER_RD_COMBINE_EN BIT5 +#define PCR_MASTER_WR_TRIG_WHOLE BIT6 +#define PCR_MASTER_RD_TRIG_WHOLE BIT7 +#define PCR_MASTER_MEM_RD_LINE_EN BIT8 +#define PCR_MASTER_MEM_RD_MULT_EN BIT9 +#define PCR_MASTER_WORD_SWAP_EN BIT10 +#define PCR_SLAVE_WORD_SWAP_EN BIT11 +#define PCR_NS_ACCORDING_RCV_TRANS BIT14 +#define PCR_MASTER_PCIX_REQ64N_EN BIT15 +#define PCR_SLAVE_BYTE_SWAP_EN BIT16 +#define PCR_MASTER_DAC_EN BIT17 +#define PCR_MASTER_M64_ALLIGN BIT18 +#define PCR_ERRORS_PROPAGATION_EN BIT19 +#define PCR_SLAVE_SWAP_ENABLE BIT20 +#define PCR_MASTER_SWAP_ENABLE BIT21 +#define PCR_MASTER_INT_SWAP_EN BIT22 +#define PCR_LOOP_BACK_ENABLE BIT23 +#define PCR_SLAVE_INTREG_SWAP_OFFS 24 +#define PCR_SLAVE_INTREG_SWAP_MASK 0x3 +#define PCR_SLAVE_INTREG_BYTE_SWAP \ + (MV_BYTE_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK) +#define PCR_SLAVE_INTREG_NO_SWAP \ + (MV_NO_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK) +#define PCR_SLAVE_INTREG_BYTE_WORD \ + (MV_BYTE_WORD_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK) +#define PCR_SLAVE_INTREG_WORD_SWAP \ + (MV_WORD_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK) +#define PCR_RESET_REASSERTION_EN BIT26 +#define PCR_PCI_TO_CPU_REG_ORDER_EN BIT28 +#define PCR_CPU_TO_PCI_ORDER_EN BIT29 +#define PCR_PCI_TO_CPU_ORDER_EN BIT30 + +/* PCI Mode Register (PMR) */ +#define PMR_PCI_ID_OFFS 0 /* PCI Interface ID */ +#define PMR_PCI_ID_MASK (0x1 << PMR_PCI_ID_OFFS) +#define PMR_PCI_ID_PCI(pciNum) ((pciNum) << PCI_MODE_PCIID_OFFS) + +#define PMR_PCI_64_OFFS 2 /* 64-bit PCI Interface */ +#define PMR_PCI_64_MASK (0x1 << PMR_PCI_64_OFFS) +#define PMR_PCI_64_64BIT (0x1 << PMR_PCI_64_OFFS) +#define PMR_PCI_64_32BIT (0x0 << PMR_PCI_64_OFFS) + +#define PMR_PCI_MODE_OFFS 4 /* PCI interface mode of operation */ +#define PMR_PCI_MODE_MASK (0x3 << PMR_PCI_MODE_OFFS) +#define PMR_PCI_MODE_CONV (0x0 << PMR_PCI_MODE_OFFS) +#define PMR_PCI_MODE_PCIX_66MHZ (0x1 << PMR_PCI_MODE_OFFS) +#define PMR_PCI_MODE_PCIX_100MHZ (0x2 << PMR_PCI_MODE_OFFS) +#define PMR_PCI_MODE_PCIX_133MHZ (0x3 << PMR_PCI_MODE_OFFS) + +#define PMR_EXP_ROM_SUPPORT BIT8 /* Expansion ROM Active */ + +#define PMR_PCI_RESET_OFFS 31 /* PCI Interface Reset Indication */ +#define PMR_PCI_RESET_MASK (0x1 << PMR_PCI_RESET_OFFS) +#define PMR_PCI_RESET_PCIXRST (0x0 << PMR_PCI_RESET_OFFS) + + +/* PCI Retry Register (PRR) */ +#define PRR_RETRY_CNTR_OFFS 16 /* Retry Counter */ +#define PRR_RETRY_CNTR_MAX 0xff +#define PRR_RETRY_CNTR_MASK (PRR_RETRY_CNTR_MAX << PRR_RETRY_CNTR_OFFS) + + +/* PCI Discard Timer Register (PDTR) */ +#define PDTR_TIMER_OFFS 0 /* Timer */ +#define PDTR_TIMER_MAX 0xffff +#define PDTR_TIMER_MIN 0x7F +#define PDTR_TIMER_MASK (PDTR_TIMER_MAX << PDTR_TIMER_OFFS) + + +/* PCI Arbiter Control Register (PACR) */ +#define PACR_BROKEN_DETECT_EN BIT1 /* Broken Detection Enable */ + +#define PACR_BROKEN_VAL_OFFS 3 /* Broken Value */ +#define PACR_BROKEN_VAL_MASK (0xf << PACR_BROKEN_VAL_OFFS) +#define PACR_BROKEN_VAL_CONV_MIN 0x2 +#define PACR_BROKEN_VAL_PCIX_MIN 0x6 + +#define PACR_PARK_DIS_OFFS 14 /* Parking Disable */ +#define PACR_PARK_DIS_MAX_AGENT 0x3f +#define PACR_PARK_DIS_MASK (PACR_PARK_DIS_MAX_AGENT<