From 0002be7b1a5c266968b8afcf1cc70f1e5138626a Mon Sep 17 00:00:00 2001 From: kaloz Date: Mon, 25 Mar 2013 14:18:32 +0000 Subject: [gemini]: upgrade to 3.9-rc4, disable unsupported boards git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36128 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../130-usb-ehci-gemini-fot2gxx-support.patch | 617 +++++++++++++++++++++ 1 file changed, 617 insertions(+) create mode 100644 target/linux/gemini/patches/130-usb-ehci-gemini-fot2gxx-support.patch (limited to 'target/linux/gemini/patches/130-usb-ehci-gemini-fot2gxx-support.patch') diff --git a/target/linux/gemini/patches/130-usb-ehci-gemini-fot2gxx-support.patch b/target/linux/gemini/patches/130-usb-ehci-gemini-fot2gxx-support.patch new file mode 100644 index 000000000..ed6c6259d --- /dev/null +++ b/target/linux/gemini/patches/130-usb-ehci-gemini-fot2gxx-support.patch @@ -0,0 +1,617 @@ +--- /dev/null ++++ b/drivers/usb/host/ehci-fotg2xx.c +@@ -0,0 +1,465 @@ ++/* ++ * EHCI Host Controller driver ++ * ++ * Copyright (C) 2006 Sony Computer Entertainment Inc. ++ * Copyright 2006 Sony Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License. ++ */ ++ ++#include ++#include ++ ++#define otg_set(port, bits) writel(readl(hcd->regs + port) | bits, hcd->regs + port) ++ ++#define otg_clear(port, bits) writel(readl(hcd->regs + port) & ~bits, hcd->regs + port) ++ ++#define GLOBAL_ISR 0xC0 ++#define GLOBAL_ICR 0xC4 ++ ++#define HCD_MISC 0x40 ++ ++#define OTGC_SCR 0x80 ++#define OTGC_INT_EN 0x88 ++ ++#define GLOBAL_INT_POLARITY (1 << 3) ++#define GLOBAL_INT_MASK_HC (1 << 2) ++#define GLOBAL_INT_MASK_OTG (1 << 1) ++#define GLOBAL_INT_MASK_DEV (1 << 0) ++ ++#define OTGC_SCR_ID (1 << 21) ++#define OTGC_SCR_CROLE (1 << 20) ++#define OTGC_SCR_VBUS_VLD (1 << 19) ++#define OTGC_SCR_A_SRP_RESP_TYPE (1 << 8) ++#define OTGC_SCR_A_SRP_DET_EN (1 << 7) ++#define OTGC_SCR_A_SET_B_HNP_EN (1 << 6) ++#define OTGC_SCR_A_BUS_DROP (1 << 5) ++#define OTGC_SCR_A_BUS_REQ (1 << 4) ++ ++#define OTGC_INT_APLGRMV (1 << 12) ++#define OTGC_INT_BPLGRMV (1 << 11) ++#define OTGC_INT_OVC (1 << 10) ++#define OTGC_INT_IDCHG (1 << 9) ++#define OTGC_INT_RLCHG (1 << 8) ++#define OTGC_INT_AVBUSERR (1 << 5) ++#define OTGC_INT_ASRPDET (1 << 4) ++#define OTGC_INT_BSRPDN (1 << 0) ++ ++#define OTGC_INT_A_TYPE (OTGC_INT_ASRPDET|OTGC_INT_AVBUSERR|OTGC_INT_OVC|OTGC_INT_RLCHG|OTGC_INT_IDCHG|OTGC_INT_APLGRMV) ++#define OTGC_INT_B_TYPE (OTGC_INT_AVBUSERR|OTGC_INT_OVC|OTGC_INT_RLCHG|OTGC_INT_IDCHG) ++ ++static void fotg2xx_otgc_role_change(struct usb_hcd *hcd); ++ ++static void fotg2xx_otgc_init(struct usb_hcd *hcd) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ unsigned int reg; ++ ++ reg = __raw_readl(hcd->regs + OTGC_SCR); ++ ehci_info(ehci, "role detected: %s, ", ++ (reg & OTGC_SCR_CROLE) ? "Peripheral" : "Host"); ++ ++ if (reg & OTGC_SCR_ID) ++ ehci_info(ehci, "B-Device (may be unsupported!)\n"); ++ else ++ ehci_info(ehci, "A-Device\n"); ++ ++ /* Enable the SRP detect */ ++ reg &= ~OTGC_SCR_A_SRP_RESP_TYPE; ++ __raw_writel(reg, hcd->regs + OTGC_SCR); ++ ++ reg = __raw_readl(hcd->regs + OTGC_INT_EN); ++ /* clear INT B: bits AVBUSERR | OVC | RLCHG | IDCHG */ ++ reg &= ~OTGC_INT_B_TYPE; ++ /* set INT A: bits ASRPDET | AVBUSERR | OVC | RLCHG | IDCHG | APLGRMV */ ++ reg |= OTGC_INT_A_TYPE; ++ __raw_writel(reg, hcd->regs + OTGC_INT_EN); ++ ++ reg = __raw_readl(hcd->regs + GLOBAL_ICR); ++ reg &= ~GLOBAL_INT_MASK_OTG; ++ __raw_writel(reg, hcd->regs + GLOBAL_ICR); ++ ++ /* setup MISC register, fixes timing problems */ ++ reg = __raw_readl(hcd->regs + HCD_MISC); ++ reg |= 0xD; ++ __raw_writel(reg, hcd->regs + HCD_MISC); ++ ++ fotg2xx_otgc_role_change(hcd); ++} ++ ++static void fotg2xx_otgh_close(struct usb_hcd *hcd) ++{ ++ unsigned int reg; ++ ++ /* <1>.Enable Interrupt Mask */ ++ reg = __raw_readl(hcd->regs + GLOBAL_ICR); ++ reg |= GLOBAL_INT_MASK_HC; ++ __raw_writel(reg, hcd->regs + GLOBAL_ICR); ++ ++ /* <2>.Clear the Interrupt status */ ++ reg = __raw_readl(hcd->regs + 0x18); ++ reg &= 0x0000003F; ++ __raw_writel(reg, hcd->regs + 0x14); ++} ++ ++static void fotg2xx_otgh_open(struct usb_hcd *hcd) ++{ ++ unsigned int reg; ++ ++ reg = __raw_readl(hcd->regs + OTGC_SCR); ++ reg &= ~OTGC_SCR_A_SRP_DET_EN; ++ __raw_writel(reg, hcd->regs + OTGC_SCR); ++ ++ reg = __raw_readl(hcd->regs + GLOBAL_ICR); ++ reg &= ~GLOBAL_INT_MASK_HC; ++ __raw_writel(reg, hcd->regs + GLOBAL_ICR); ++} ++ ++/* change to host role */ ++static void fotg2xx_otgc_role_change(struct usb_hcd *hcd) ++{ ++ ++ /* clear A_SET_B_HNP_EN */ ++ otg_clear(0x80, BIT(6)); ++ ++ /*** Enable VBUS driving */ ++ if (readl(hcd->regs + 0x80) & BIT(19)) ++ printk(KERN_INFO "VBUS already enabled\n"); ++ else { ++ int cnt = 0; ++ ++ /* clear A_BUS_DROP */ ++ otg_clear(0x80, BIT(5)); ++ ++ /* set A_BUS_REQ */ ++ otg_set(0x80, BIT(4)); ++ ++ /* set global bus reg to VBUS on */ ++ writel(readl(IO_ADDRESS(0x40000000) + 0x30) | ((BIT(21)|BIT(22))), ++ IO_ADDRESS(0x40000000) + 0x30); ++ ++ if (readl(hcd->regs + 0x80) & (1<<19)) { ++ printk(KERN_INFO "Waiting for VBus"); ++ while (!(readl(hcd->regs + 0x80) & (1<<19)) && (cnt < 80)) { ++ printk(KERN_CONT "."); ++ cnt++; ++ } ++ printk(KERN_CONT "\n"); ++ } else ++ printk(KERN_INFO "VBUS enabled.\n"); ++ ++ mdelay(1); ++ } ++ fotg2xx_otgh_open(hcd); ++} ++ ++static int fotg2xx_ehci_hc_reset(struct usb_hcd *hcd) ++{ ++ int result; ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ ++ ehci->caps = hcd->regs; ++ ehci->regs = hcd->regs + HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); ++ ++ dbg_hcs_params(ehci, "reset"); ++ dbg_hcc_params(ehci, "reset"); ++ ++ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); ++ hcd->has_tt = 1; ++ ++ result = ehci_halt(ehci); ++ if (result) ++ return result; ++ ++ result = ehci_init(hcd); ++ if (result) ++ return result; ++ ++ ehci_port_power(ehci, 0); ++ ++ return result; ++} ++ ++/* ++ * Name: OTGC_INT_ISR ++ * Description:This interrupt service routine belongs to the OTG-Controller ++ * <1>.Check for ID_Change ++ * <2>.Check for RL_Change ++ * <3>.Error Detect ++ * Input: wINTStatus ++ * Output:void ++ */ ++void fotg2xx_int_isr(struct usb_hcd *hcd, u32 wINTStatus) ++{ ++ /* <1>.Check for ID_Change */ ++ if (wINTStatus&OTGC_INT_IDCHG) { ++ if ((readl(hcd->regs + 0x80) & BIT(21)) != 0) ++ fotg2xx_otgc_init(hcd); /* Change to B Type */ ++ else ++ fotg2xx_otgc_init(hcd); /* Change to A Type */ ++ ++ return; ++ } ++ ++ /* <2>.Check for RL_Change */ ++ if (wINTStatus&OTGC_INT_RLCHG) ++ fotg2xx_otgc_role_change(hcd); ++ ++ /* <3>.Error Detect */ ++ if (wINTStatus&OTGC_INT_AVBUSERR) ++ printk(KERN_ERR "VBus error!\n"); ++ ++ if (wINTStatus&OTGC_INT_OVC) ++ printk(KERN_WARNING "Overcurrent detected!\n"); ++ ++ /* <3>.Check for Type-A/Type-B Interrupt */ ++ if ((readl(hcd->regs + 0x80) & BIT(21)) == 0) { /*For Type-A Interrupt*/ ++ if (wINTStatus & (OTGC_INT_A_TYPE | OTGC_INT_ASRPDET)) { ++ /* <1>.SRP detected => then set global variable */ ++ printk(KERN_WARNING "SRP detected, but not implemented!\n"); ++ ++#if 0 ++ u32 wTempCounter; ++ /* <2>.Turn on the V Bus */ ++ pFTC_OTG->otg.state = OTG_STATE_A_WAIT_VRISE; ++ OTGC_enable_vbus_draw_storlink(1); ++ pFTC_OTG->otg.state = OTG_STATE_A_HOST; ++ /* <3>.Should waiting for Device-Connect Wait 300ms */ ++ INFO(pFTC_OTG, ">>> OTG-A Waiting for OTG-B Connect,\n"); ++ wTempCounter = 0; ++ while (mwHost20_PORTSC_ConnectStatus_Rd() == 0) { ++ mdelay(1); ++ wTempCounter++; ++ /* Waiting for 300 ms */ ++ if (wTempCounter > 300) { ++ mdwOTGC_Control_A_SRP_DET_EN_Clr(); ++ INFO(pFTC_OTG, ">>> OTG-B do not connect under 300 ms...\n"); ++ break; ++ } ++ } ++ /* <4>.If Connect => issue quick Reset */ ++ if (mwHost20_PORTSC_ConnectStatus_Rd() > 0) { ++ mdelay(300); /* For OPT-A Test */ ++ OTGH_host_quick_Reset(); ++ OTGH_Open(); ++ pFTC_OTG->otg.host->A_Disable_Set_Feature_HNP = 0; ++ } ++#endif ++ } ++ } else { /* For Type-B Interrupt */ ++ BUG(); ++ } ++} ++ ++static irqreturn_t fotg2xx_ehci_irq(int irq, void *devid) ++{ ++ struct usb_hcd *hcd = devid; ++ u32 val; ++ ++ /* OTG Interrupt Status Register */ ++ val = readl(hcd->regs + 0x84); ++ ++ /* OTG stuff */ ++ if (val) { ++ /* supposed to do "INT STS Clr" - XXX */ ++ writel(readl(hcd->regs + 0x84) | val, hcd->regs + 0x84); ++ ++ fotg2xx_int_isr(hcd, val); ++ ++ /* supposed to do "INT STS Clr" - XXX */ ++ writel(readl(hcd->regs + 0x84) | val, hcd->regs + 0x84); ++ ++ return IRQ_HANDLED; ++ } ++ ++ if ((readl(hcd->regs + 0x80) & BIT(20)) == 0) { /* Role is HOST */ ++ if (readl(hcd->regs + 0xC0) & BIT(2)) { /* INT STS HOST */ ++ /* leave this for ehci irq handler */ ++ return IRQ_NONE; ++ } ++ } else ++ printk(KERN_WARNING ++ "received irq for peripheral - don't know what to do!\n"); ++ ++ /* do not call the ehci irq handler */ ++ return IRQ_HANDLED; ++} ++ ++static int fotg2xx_ehci_run(struct usb_hcd *hcd) ++{ ++ int retval; ++ ++ retval = ehci_run(hcd); ++ ++ fotg2xx_otgh_close(hcd); ++ fotg2xx_otgc_init(hcd); ++ ++ return retval; ++} ++ ++static const struct hc_driver fotg2xx_ehci_hc_driver = { ++ .description = hcd_name, ++ .product_desc = "FOTG2XX EHCI Host Controller", ++ .hcd_priv_size = sizeof(struct ehci_hcd), ++ .irq = ehci_irq, ++ .flags = HCD_MEMORY | HCD_USB2, ++ .reset = fotg2xx_ehci_hc_reset, ++ .start = fotg2xx_ehci_run, ++ .stop = ehci_stop, ++ .shutdown = ehci_shutdown, ++ ++ .urb_enqueue = ehci_urb_enqueue, ++ .urb_dequeue = ehci_urb_dequeue, ++ .endpoint_disable = ehci_endpoint_disable, ++ .endpoint_reset = ehci_endpoint_reset, ++ ++ .get_frame_number = ehci_get_frame, ++ ++ .hub_status_data = ehci_hub_status_data, ++ .hub_control = ehci_hub_control, ++#if defined(CONFIG_PM) ++ .bus_suspend = ehci_bus_suspend, ++ .bus_resume = ehci_bus_resume, ++#endif ++ .relinquish_port = ehci_relinquish_port, ++ .port_handed_over = ehci_port_handed_over, ++ ++ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, ++}; ++ ++static int fotg2xx_ehci_probe(struct platform_device *pdev) ++{ ++ const struct hc_driver *driver = &fotg2xx_ehci_hc_driver; ++ struct usb_hcd *hcd; ++ struct resource *res; ++ int irq; ++ int retval; ++ ++ pr_debug("initializing FOTG2XX-SOC USB Controller\n"); ++ ++ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ if (!res) { ++ dev_err(&pdev->dev, ++ "Found HC with no IRQ. Check %s setup!\n", ++ dev_name(&pdev->dev)); ++ return -ENODEV; ++ } ++ ++ irq = res->start; ++ ++ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); ++ if (!hcd) { ++ retval = -ENOMEM; ++ goto err1; ++ } ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_err(&pdev->dev, ++ "Found HC with no register addr. Check %s setup!\n", ++ dev_name(&pdev->dev)); ++ retval = -ENODEV; ++ goto err2; ++ } ++ ++ hcd->rsrc_start = res->start; ++ hcd->rsrc_len = res->end - res->start + 1; ++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, ++ driver->description)) { ++ dev_dbg(&pdev->dev, "controller already in use\n"); ++ retval = -EBUSY; ++ goto err2; ++ } ++ ++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); ++ if (hcd->regs == NULL) { ++ dev_dbg(&pdev->dev, "error mapping memory\n"); ++ retval = -EFAULT; ++ goto err3; ++ } ++ ++ ++ /* set global reg to mini-A host */ ++ writel(readl(IO_ADDRESS(0x40000000) + 0x30) & ~(BIT(30)|BIT(29)), ++ IO_ADDRESS(0x40000000) + 0x30); ++ ++ /* USB0&USB1 - VBUS off */ ++ writel(readl(IO_ADDRESS(0x40000000) + 0x30) & ~(BIT(21)|BIT(22)), ++ IO_ADDRESS(0x40000000) + 0x30); ++ ++ if ((readl(hcd->regs) == 0x01000010) && ++ (readl(hcd->regs + 4) == 0x00000001) && ++ (readl(hcd->regs + 8) == 0x00000006)) { ++ dev_info(&pdev->dev, ++ "Found Faraday OTG 2XX controller (base = 0x%08lX)\n", ++ (unsigned long) hcd->rsrc_start); ++ } else { ++ dev_err(&pdev->dev, "fotg2xx id mismatch: found %d.%d.%d\n", ++ readl(hcd->regs + 0x00), ++ readl(hcd->regs + 0x04), ++ readl(hcd->regs + 0x08)); ++ retval = -ENODEV; ++ goto err4; ++ } ++ ++ platform_set_drvdata(pdev, hcd); ++ ++ /* mask interrupts - peripheral, otg, host, hi-active (bits 0,1,2,3) */ ++ otg_set(0xc4, BIT(3)); /* hi active */ ++ ++ otg_set(0xc4, BIT(2)); /* host */ ++ otg_set(0xc4, BIT(1)); /* otg */ ++ otg_set(0xc4, BIT(0)); /* peripheral */ ++ ++ /* register additional interrupt - here we check otg status */ ++ if ((request_irq(irq, &fotg2xx_ehci_irq, IRQF_SHARED | IRQF_DISABLED, ++ hcd->irq_descr, hcd)) != 0) { ++ dev_dbg(&pdev->dev, "error requesting irq %d\n", irq); ++ retval = -EFAULT; ++ goto err4; ++ } ++ ++ retval = usb_add_hcd(hcd, irq, IRQF_SHARED); ++ if (retval != 0) ++ goto err4; ++ return retval; ++ ++err4: ++ iounmap(hcd->regs); ++err3: ++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); ++err2: ++ usb_put_hcd(hcd); ++err1: ++ dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval); ++ return retval; ++} ++ ++/* may be called without controller electrically present */ ++/* may be called with controller, bus, and devices active */ ++ ++int fotg2xx_ehci_remove(struct platform_device *pdev) ++{ ++ struct usb_hcd *hcd = ++ (struct usb_hcd *)platform_get_drvdata(pdev); ++ ++ usb_remove_hcd(hcd); ++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); ++ iounmap(hcd->regs); ++ usb_put_hcd(hcd); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++MODULE_ALIAS("platform:ehci-fotg2xx"); ++ ++static struct platform_driver fotg2xx_ehci_driver = { ++ .probe = fotg2xx_ehci_probe, ++ .remove = fotg2xx_ehci_remove, ++ .driver = { ++ .name = "ehci-fotg2xx", ++ }, ++}; +--- a/drivers/usb/host/ehci.h ++++ b/drivers/usb/host/ehci.h +@@ -600,7 +600,12 @@ static inline unsigned int + ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc) + { + if (ehci_is_TDI(ehci)) { ++#ifdef CONFIG_ARCH_GEMINI ++ portsc = readl(ehci_to_hcd(ehci)->regs + 0x80); ++ switch ((portsc>>22)&3) { ++#else + switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) { ++#endif + case 0: + return 0; + case 1: +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -204,10 +204,12 @@ static int ehci_halt (struct ehci_hcd *e + * This routine gets called during probe before ehci->command + * has been initialized, so we can't rely on its value. + */ ++#ifndef CONFIG_ARCH_GEMINI + ehci->command &= ~CMD_RUN; + temp = ehci_readl(ehci, &ehci->regs->command); + temp &= ~(CMD_RUN | CMD_IAAD); + ehci_writel(ehci, temp, &ehci->regs->command); ++#endif + + spin_unlock_irq(&ehci->lock); + synchronize_irq(ehci_to_hcd(ehci)->irq); +@@ -257,13 +259,17 @@ static int ehci_reset (struct ehci_hcd * + if (ehci->has_hostpc) { + ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS, + &ehci->regs->usbmode_ex); ++#ifndef CONFIG_ARCH_GEMINI + ehci_writel(ehci, TXFIFO_DEFAULT, &ehci->regs->txfill_tuning); ++#endif + } + if (retval) + return retval; + ++#ifndef CONFIG_ARCH_GEMINI + if (ehci_is_TDI(ehci)) + tdi_reset (ehci); ++#endif + + if (ehci->debug) + dbgp_external_startup(ehci_to_hcd(ehci)); +@@ -341,11 +347,14 @@ static void ehci_silence_controller(stru + ehci->rh_state = EHCI_RH_HALTED; + ehci_turn_off_all_ports(ehci); + ++#ifndef CONFIG_ARCH_GEMINI + /* make BIOS/etc use companion controller during reboot */ + ehci_writel(ehci, 0, &ehci->regs->configured_flag); + + /* unblock posted writes */ + ehci_readl(ehci, &ehci->regs->configured_flag); ++#endif ++ + spin_unlock_irq(&ehci->lock); + } + +@@ -600,7 +609,9 @@ static int ehci_run (struct usb_hcd *hcd + // Philips, Intel, and maybe others need CMD_RUN before the + // root hub will detect new devices (why?); NEC doesn't + ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); ++#ifndef CONFIG_ARCH_GEMINI + ehci->command |= CMD_RUN; ++#endif + ehci_writel(ehci, ehci->command, &ehci->regs->command); + dbg_cmd (ehci, "init", ehci->command); + +@@ -620,9 +631,11 @@ static int ehci_run (struct usb_hcd *hcd + */ + down_write(&ehci_cf_port_reset_rwsem); + ehci->rh_state = EHCI_RH_RUNNING; ++#ifndef CONFIG_ARCH_GEMINI + ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); + ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ + msleep(5); ++#endif /* !CONFIG_ARCH_GEMINI */ + up_write(&ehci_cf_port_reset_rwsem); + ehci->last_periodic_enable = ktime_get_real(); + +@@ -1241,6 +1254,11 @@ MODULE_DESCRIPTION(DRIVER_DESC); + MODULE_AUTHOR (DRIVER_AUTHOR); + MODULE_LICENSE ("GPL"); + ++#ifdef CONFIG_ARCH_GEMINI ++#include "ehci-fotg2xx.c" ++#define PLATFORM_DRIVER fotg2xx_ehci_driver ++#endif ++ + #ifdef CONFIG_USB_EHCI_FSL + #include "ehci-fsl.c" + #define PLATFORM_DRIVER ehci_fsl_driver +--- a/drivers/usb/host/ehci-hub.c ++++ b/drivers/usb/host/ehci-hub.c +@@ -912,6 +912,12 @@ static int ehci_hub_control ( + /* see what we found out */ + temp = check_reset_complete (ehci, wIndex, status_reg, + ehci_readl(ehci, status_reg)); ++#ifdef CONFIG_ARCH_GEMINI ++ /* restart schedule */ ++ ehci_writel(ehci, ehci_readl(ehci, &ehci->regs->command) | CMD_RUN, &ehci->regs->command); ++ ++// hcd->state = HC_STATE_RUNNING; ++#endif + } + + if (!(temp & (PORT_RESUME|PORT_RESET))) { +--- a/drivers/usb/Kconfig ++++ b/drivers/usb/Kconfig +@@ -47,6 +47,7 @@ config USB_ARCH_HAS_EHCI + default y if MICROBLAZE + default y if SPARC_LEON + default y if ARCH_MMP ++ default y if ARCH_GEMINI + default y if MACH_LOONGSON1 + default y if PLAT_ORION + default PCI +@@ -96,7 +97,7 @@ config USB + traditional PC serial port. The bus supplies power to peripherals + and allows for hot swapping. Up to 127 USB peripherals can be + connected to a single USB host in a tree structure. +- ++ + The USB host is the root of the tree, the peripherals are the + leaves and the inner nodes are special USB devices called hubs. + Most PCs now have USB host ports, used to connect peripherals +--- a/include/linux/usb/ehci_def.h ++++ b/include/linux/usb/ehci_def.h +@@ -111,6 +111,7 @@ struct ehci_regs { + /* ASYNCLISTADDR: offset 0x18 */ + u32 async_next; /* address of next async queue head */ + ++#ifndef CONFIG_ARCH_GEMINI + u32 reserved1[2]; + + /* TXFILLTUNING: offset 0x24 */ +@@ -118,6 +119,7 @@ struct ehci_regs { + #define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ + + u32 reserved2[6]; ++#endif /* !CONFIG_ARCH_GEMINI */ + + /* CONFIGFLAG: offset 0x40 */ + u32 configured_flag; -- cgit v1.2.3