From b6db7329f48efc92b80750e6526e903f7c7c545b Mon Sep 17 00:00:00 2001 From: kaloz Date: Tue, 2 Jun 2009 09:18:55 +0000 Subject: rename cavium-octeon to octeon git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16292 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../patches/006-octeon_mgmt_driver.patch | 2022 -------------------- 1 file changed, 2022 deletions(-) delete mode 100644 target/linux/cavium-octeon/patches/006-octeon_mgmt_driver.patch (limited to 'target/linux/cavium-octeon/patches/006-octeon_mgmt_driver.patch') diff --git a/target/linux/cavium-octeon/patches/006-octeon_mgmt_driver.patch b/target/linux/cavium-octeon/patches/006-octeon_mgmt_driver.patch deleted file mode 100644 index 7ea094519..000000000 --- a/target/linux/cavium-octeon/patches/006-octeon_mgmt_driver.patch +++ /dev/null @@ -1,2022 +0,0 @@ -Signed-off-by: David Daney ---- - arch/mips/include/asm/octeon/cvmx-mdio.h | 577 +++++++++++++++++++++ - drivers/net/Kconfig | 8 + - drivers/net/Makefile | 1 + - drivers/net/octeon/Makefile | 11 + - drivers/net/octeon/cvmx-mgmt-port.c | 818 ++++++++++++++++++++++++++++++ - drivers/net/octeon/cvmx-mgmt-port.h | 168 ++++++ - drivers/net/octeon/octeon-mgmt-port.c | 389 ++++++++++++++ - 7 files changed, 1972 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/include/asm/octeon/cvmx-mdio.h - create mode 100644 drivers/net/octeon/Makefile - create mode 100644 drivers/net/octeon/cvmx-mgmt-port.c - create mode 100644 drivers/net/octeon/cvmx-mgmt-port.h - create mode 100644 drivers/net/octeon/octeon-mgmt-port.c - ---- /dev/null -+++ b/arch/mips/include/asm/octeon/cvmx-mdio.h -@@ -0,0 +1,577 @@ -+/***********************license start*************** -+ * Author: Cavium Networks -+ * -+ * Contact: support@caviumnetworks.com -+ * This file is part of the OCTEON SDK -+ * -+ * Copyright (c) 2003-2008 Cavium Networks -+ * -+ * This file is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, Version 2, as -+ * published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful, but -+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty -+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or -+ * NONINFRINGEMENT. See the GNU General Public License for more -+ * details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this file; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ * or visit http://www.gnu.org/licenses/. -+ * -+ * This file may also be available under a different license from Cavium. -+ * Contact Cavium Networks for more information -+ ***********************license end**************************************/ -+ -+/** -+ * -+ * Interface to the SMI/MDIO hardware, including support for both IEEE 802.3 -+ * clause 22 and clause 45 operations. -+ * -+ */ -+ -+#ifndef __CVMX_MIO_H__ -+#define __CVMX_MIO_H__ -+ -+#include "cvmx-smix-defs.h" -+ -+/** -+ * PHY register 0 from the 802.3 spec -+ */ -+#define CVMX_MDIO_PHY_REG_CONTROL 0 -+union cvmx_mdio_phy_reg_control { -+ uint16_t u16; -+ struct { -+ uint16_t reset:1; -+ uint16_t loopback:1; -+ uint16_t speed_lsb:1; -+ uint16_t autoneg_enable:1; -+ uint16_t power_down:1; -+ uint16_t isolate:1; -+ uint16_t restart_autoneg:1; -+ uint16_t duplex:1; -+ uint16_t collision_test:1; -+ uint16_t speed_msb:1; -+ uint16_t unidirectional_enable:1; -+ uint16_t reserved_0_4:5; -+ } s; -+}; -+ -+/** -+ * PHY register 1 from the 802.3 spec -+ */ -+#define CVMX_MDIO_PHY_REG_STATUS 1 -+union cvmx_mdio_phy_reg_status { -+ uint16_t u16; -+ struct { -+ uint16_t capable_100base_t4:1; -+ uint16_t capable_100base_x_full:1; -+ uint16_t capable_100base_x_half:1; -+ uint16_t capable_10_full:1; -+ uint16_t capable_10_half:1; -+ uint16_t capable_100base_t2_full:1; -+ uint16_t capable_100base_t2_half:1; -+ uint16_t capable_extended_status:1; -+ uint16_t capable_unidirectional:1; -+ uint16_t capable_mf_preamble_suppression:1; -+ uint16_t autoneg_complete:1; -+ uint16_t remote_fault:1; -+ uint16_t capable_autoneg:1; -+ uint16_t link_status:1; -+ uint16_t jabber_detect:1; -+ uint16_t capable_extended_registers:1; -+ -+ } s; -+}; -+ -+/** -+ * PHY register 2 from the 802.3 spec -+ */ -+#define CVMX_MDIO_PHY_REG_ID1 2 -+union cvmx_mdio_phy_reg_id1 { -+ uint16_t u16; -+ struct { -+ uint16_t oui_bits_3_18; -+ } s; -+}; -+ -+/** -+ * PHY register 3 from the 802.3 spec -+ */ -+#define CVMX_MDIO_PHY_REG_ID2 3 -+union cvmx_mdio_phy_reg_id2 { -+ uint16_t u16; -+ struct { -+ uint16_t oui_bits_19_24:6; -+ uint16_t model:6; -+ uint16_t revision:4; -+ } s; -+}; -+ -+/** -+ * PHY register 4 from the 802.3 spec -+ */ -+#define CVMX_MDIO_PHY_REG_AUTONEG_ADVER 4 -+union cvmx_mdio_phy_reg_autoneg_adver { -+ uint16_t u16; -+ struct { -+ uint16_t next_page:1; -+ uint16_t reserved_14:1; -+ uint16_t remote_fault:1; -+ uint16_t reserved_12:1; -+ uint16_t asymmetric_pause:1; -+ uint16_t pause:1; -+ uint16_t advert_100base_t4:1; -+ uint16_t advert_100base_tx_full:1; -+ uint16_t advert_100base_tx_half:1; -+ uint16_t advert_10base_tx_full:1; -+ uint16_t advert_10base_tx_half:1; -+ uint16_t selector:5; -+ } s; -+}; -+ -+/** -+ * PHY register 5 from the 802.3 spec -+ */ -+#define CVMX_MDIO_PHY_REG_LINK_PARTNER_ABILITY 5 -+union cvmx_mdio_phy_reg_link_partner_ability { -+ uint16_t u16; -+ struct { -+ uint16_t next_page:1; -+ uint16_t ack:1; -+ uint16_t remote_fault:1; -+ uint16_t reserved_12:1; -+ uint16_t asymmetric_pause:1; -+ uint16_t pause:1; -+ uint16_t advert_100base_t4:1; -+ uint16_t advert_100base_tx_full:1; -+ uint16_t advert_100base_tx_half:1; -+ uint16_t advert_10base_tx_full:1; -+ uint16_t advert_10base_tx_half:1; -+ uint16_t selector:5; -+ } s; -+}; -+ -+/** -+ * PHY register 6 from the 802.3 spec -+ */ -+#define CVMX_MDIO_PHY_REG_AUTONEG_EXPANSION 6 -+union cvmx_mdio_phy_reg_autoneg_expansion { -+ uint16_t u16; -+ struct { -+ uint16_t reserved_5_15:11; -+ uint16_t parallel_detection_fault:1; -+ uint16_t link_partner_next_page_capable:1; -+ uint16_t local_next_page_capable:1; -+ uint16_t page_received:1; -+ uint16_t link_partner_autoneg_capable:1; -+ -+ } s; -+}; -+ -+/** -+ * PHY register 9 from the 802.3 spec -+ */ -+#define CVMX_MDIO_PHY_REG_CONTROL_1000 9 -+union cvmx_mdio_phy_reg_control_1000 { -+ uint16_t u16; -+ struct { -+ uint16_t test_mode:3; -+ uint16_t manual_master_slave:1; -+ uint16_t master:1; -+ uint16_t port_type:1; -+ uint16_t advert_1000base_t_full:1; -+ uint16_t advert_1000base_t_half:1; -+ uint16_t reserved_0_7:8; -+ } s; -+}; -+ -+/** -+ * PHY register 10 from the 802.3 spec -+ */ -+#define CVMX_MDIO_PHY_REG_STATUS_1000 10 -+union cvmx_mdio_phy_reg_status_1000 { -+ uint16_t u16; -+ struct { -+ uint16_t master_slave_fault:1; -+ uint16_t is_master:1; -+ uint16_t local_receiver_ok:1; -+ uint16_t remote_receiver_ok:1; -+ uint16_t remote_capable_1000base_t_full:1; -+ uint16_t remote_capable_1000base_t_half:1; -+ uint16_t reserved_8_9:2; -+ uint16_t idle_error_count:8; -+ } s; -+}; -+ -+/** -+ * PHY register 15 from the 802.3 spec -+ */ -+#define CVMX_MDIO_PHY_REG_EXTENDED_STATUS 15 -+union cvmx_mdio_phy_reg_extended_status { -+ uint16_t u16; -+ struct { -+ uint16_t capable_1000base_x_full:1; -+ uint16_t capable_1000base_x_half:1; -+ uint16_t capable_1000base_t_full:1; -+ uint16_t capable_1000base_t_half:1; -+ uint16_t reserved_0_11:12; -+ } s; -+}; -+ -+/** -+ * PHY register 13 from the 802.3 spec -+ */ -+#define CVMX_MDIO_PHY_REG_MMD_CONTROL 13 -+union cvmx_mdio_phy_reg_mmd_control { -+ uint16_t u16; -+ struct { -+ uint16_t function:2; -+ uint16_t reserved_5_13:9; -+ uint16_t devad:5; -+ } s; -+}; -+ -+/** -+ * PHY register 14 from the 802.3 spec -+ */ -+#define CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA 14 -+union cvmx_mdio_phy_reg_mmd_address_data { -+ uint16_t u16; -+ struct { -+ uint16_t address_data:16; -+ } s; -+}; -+ -+/* Operating request encodings. */ -+#define MDIO_CLAUSE_22_WRITE 0 -+#define MDIO_CLAUSE_22_READ 1 -+ -+#define MDIO_CLAUSE_45_ADDRESS 0 -+#define MDIO_CLAUSE_45_WRITE 1 -+#define MDIO_CLAUSE_45_READ_INC 2 -+#define MDIO_CLAUSE_45_READ 3 -+ -+/* MMD identifiers, mostly for accessing devices withing XENPAK modules. */ -+#define CVMX_MMD_DEVICE_PMA_PMD 1 -+#define CVMX_MMD_DEVICE_WIS 2 -+#define CVMX_MMD_DEVICE_PCS 3 -+#define CVMX_MMD_DEVICE_PHY_XS 4 -+#define CVMX_MMD_DEVICE_DTS_XS 5 -+#define CVMX_MMD_DEVICE_TC 6 -+#define CVMX_MMD_DEVICE_CL22_EXT 29 -+#define CVMX_MMD_DEVICE_VENDOR_1 30 -+#define CVMX_MMD_DEVICE_VENDOR_2 31 -+ -+/** -+ * Perform an MII read. This function is used to read PHY -+ * registers controlling auto negotiation. -+ * -+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) -+ * support multiple busses. -+ * @phy_id: The MII phy id -+ * @location: Register location to read -+ * -+ * Returns Result from the read or -1 on failure -+ */ -+static inline int cvmx_mdio_read(int bus_id, int phy_id, int location) -+{ -+ union cvmx_smix_cmd smi_cmd; -+ union cvmx_smix_rd_dat smi_rd; -+ int timeout = 1000; -+ -+ smi_cmd.u64 = 0; -+ smi_cmd.s.phy_op = MDIO_CLAUSE_22_READ; -+ smi_cmd.s.phy_adr = phy_id; -+ smi_cmd.s.reg_adr = location; -+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64); -+ -+ do { -+ cvmx_wait(1000); -+ smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id)); -+ } while (smi_rd.s.pending && timeout--); -+ -+ if (smi_rd.s.val) -+ return smi_rd.s.dat; -+ else -+ return -1; -+} -+ -+/** -+ * Perform an MII write. This function is used to write PHY -+ * registers controlling auto negotiation. -+ * -+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) -+ * support multiple busses. -+ * @phy_id: The MII phy id -+ * @location: Register location to write -+ * @val: Value to write -+ * -+ * Returns -1 on error -+ * 0 on success -+ */ -+static inline int cvmx_mdio_write(int bus_id, int phy_id, int location, int val) -+{ -+ union cvmx_smix_cmd smi_cmd; -+ union cvmx_smix_wr_dat smi_wr; -+ int timeout = 1000; -+ -+ smi_wr.u64 = 0; -+ smi_wr.s.dat = val; -+ cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64); -+ -+ smi_cmd.u64 = 0; -+ smi_cmd.s.phy_op = MDIO_CLAUSE_22_WRITE; -+ smi_cmd.s.phy_adr = phy_id; -+ smi_cmd.s.reg_adr = location; -+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64); -+ -+ do { -+ cvmx_wait(1000); -+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id)); -+ } while (smi_wr.s.pending && --timeout); -+ if (timeout <= 0) -+ return -1; -+ -+ return 0; -+} -+ -+/** -+ * Perform an IEEE 802.3 clause 45 MII read using clause 22 operations. This -+ * function is used to read PHY registers controlling auto negotiation. -+ * -+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) -+ * support multiple busses. -+ * @phy_id: The MII phy id -+ * @device: MDIO Managable Device (MMD) id -+ * @location: Register location to read -+ * -+ * Returns Result from the read or -1 on failure -+ */ -+ -+static inline int cvmx_mdio_45_via_22_read(int bus_id, int phy_id, int device, -+ int location) -+{ -+ union cvmx_mdio_phy_reg_mmd_control mmd_control; -+ -+ /* -+ * a) To Register 13, write the Function field to 00 (address) -+ * and DEVAD field to the device address value for the -+ * desired MMD; -+ */ -+ mmd_control.u16 = 0; -+ mmd_control.s.function = MDIO_CLAUSE_45_ADDRESS; -+ mmd_control.s.devad = device; -+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_CONTROL, -+ mmd_control.u16); -+ -+ /* -+ * b) To Register 14, write the desired address value to the -+ * MMD's address register; -+ */ -+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA, -+ location); -+ -+ /* -+ * c) To Register 13, write the Function field to 01 (Data, no -+ * post increment) and DEVAD field to the same device -+ * address value for the desired MMD; -+ */ -+ mmd_control.u16 = 0; -+ mmd_control.s.function = MDIO_CLAUSE_45_READ; -+ mmd_control.s.devad = device; -+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_CONTROL, -+ mmd_control.u16); -+ -+ /* -+ * d) From Register 14, read the content of the MMD's selected -+ * register. -+ */ -+ return cvmx_mdio_read(bus_id, phy_id, -+ CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA); -+} -+ -+/** -+ * Perform an IEEE 802.3 clause 45 MII write using clause 22 -+ * operations. This function is used to write PHY registers -+ * controlling auto negotiation. -+ * -+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) -+ * support multiple busses. -+ * @phy_id: The MII phy id -+ * @device: MDIO Managable Device (MMD) id -+ * @location: Register location to write -+ * @val: Value to write -+ * -+ * Returns -1 on error -+ * 0 on success -+ */ -+static inline int cvmx_mdio_45_via_22_write(int bus_id, int phy_id, int device, -+ int location, int val) -+{ -+ union cvmx_mdio_phy_reg_mmd_control mmd_control; -+ -+ /* -+ * a) To Register 13, write the Function field to 00 (address) -+ * and DEVAD field to the device address value for the -+ * desired MMD; -+ */ -+ mmd_control.u16 = 0; -+ mmd_control.s.function = MDIO_CLAUSE_45_ADDRESS; -+ mmd_control.s.devad = device; -+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_CONTROL, -+ mmd_control.u16); -+ -+ /* -+ * b) To Register 14, write the desired address value to the -+ * MMD's address register; -+ */ -+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA, -+ location); -+ -+ /* -+ * c) To Register 13, write the Function field to 01 (Data, no -+ * post increment) and DEVAD field to the same device -+ * address value for the desired MMD; -+ */ -+ mmd_control.u16 = 0; -+ mmd_control.s.function = MDIO_CLAUSE_45_READ; -+ mmd_control.s.devad = device; -+ cvmx_mdio_write(bus_id, phy_id, CVMX_MDIO_PHY_REG_MMD_CONTROL, -+ mmd_control.u16); -+ -+ /* -+ * d) To Register 14, write the content of the MMD's selected -+ * register. -+ */ -+ return cvmx_mdio_write(bus_id, phy_id, -+ CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA, val); -+ -+ return 0; -+} -+ -+/** -+ * Perform an IEEE 802.3 clause 45 MII read. This function is used to read PHY -+ * registers controlling auto negotiation. -+ * -+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) -+ * support multiple busses. -+ * @phy_id: The MII phy id -+ * @device: MDIO Managable Device (MMD) id -+ * @location: Register location to read -+ * -+ * Returns Result from the read or -1 on failure -+ */ -+ -+static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device, -+ int location) -+{ -+ union cvmx_smix_cmd smi_cmd; -+ union cvmx_smix_rd_dat smi_rd; -+ union cvmx_smix_wr_dat smi_wr; -+ int timeout = 1000; -+ -+ smi_wr.u64 = 0; -+ smi_wr.s.dat = location; -+ cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64); -+ -+ smi_cmd.u64 = 0; -+ smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS; -+ smi_cmd.s.phy_adr = phy_id; -+ smi_cmd.s.reg_adr = device; -+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64); -+ -+ do { -+ cvmx_wait(1000); -+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id)); -+ } while (smi_wr.s.pending && --timeout); -+ if (timeout <= 0) -+ return -1; -+ -+ smi_cmd.u64 = 0; -+ smi_cmd.s.phy_op = MDIO_CLAUSE_45_READ; -+ smi_cmd.s.phy_adr = phy_id; -+ smi_cmd.s.reg_adr = device; -+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64); -+ -+ do { -+ cvmx_wait(1000); -+ smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id)); -+ } while (smi_rd.s.pending && timeout--); -+ -+ if (0 == timeout) -+ cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d " -+ "device %2d register %2d TIME OUT\n", -+ bus_id, phy_id, device, location); -+ -+ if (smi_rd.s.val) -+ return smi_rd.s.dat; -+ else { -+ cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d " -+ "device %2d register %2d INVALID READ\n", -+ bus_id, phy_id, device, location); -+ return -1; -+ } -+} -+ -+/** -+ * Perform an IEEE 802.3 clause 45 MII write. This function is used to -+ * write PHY registers controlling auto negotiation. -+ * -+ * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) -+ * support multiple busses. -+ * @phy_id: The MII phy id -+ * @device: MDIO Managable Device (MMD) id -+ * @location: Register location to write -+ * @val: Value to write -+ * -+ * Returns -1 on error -+ * 0 on success -+ */ -+static inline int cvmx_mdio_45_write(int bus_id, int phy_id, int device, -+ int location, int val) -+{ -+ union cvmx_smix_cmd smi_cmd; -+ union cvmx_smix_wr_dat smi_wr; -+ int timeout = 1000; -+ -+ smi_wr.u64 = 0; -+ smi_wr.s.dat = location; -+ cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64); -+ -+ smi_cmd.u64 = 0; -+ smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS; -+ smi_cmd.s.phy_adr = phy_id; -+ smi_cmd.s.reg_adr = device; -+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64); -+ -+ do { -+ cvmx_wait(1000); -+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id)); -+ } while (smi_wr.s.pending && --timeout); -+ if (timeout <= 0) -+ return -1; -+ -+ smi_wr.u64 = 0; -+ smi_wr.s.dat = val; -+ cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64); -+ -+ smi_cmd.u64 = 0; -+ smi_cmd.s.phy_op = MDIO_CLAUSE_45_WRITE; -+ smi_cmd.s.phy_adr = phy_id; -+ smi_cmd.s.reg_adr = device; -+ cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64); -+ -+ do { -+ cvmx_wait(1000); -+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id)); -+ } while (smi_wr.s.pending && --timeout); -+ if (timeout <= 0) -+ return -1; -+ -+ return 0; -+} -+ -+#endif ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -2035,6 +2035,14 @@ config ATL2 - To compile this driver as a module, choose M here. The module - will be called atl2. - -+config OCTEON_MGMT -+ tristate "OCTEON Management port ethernet driver (CN5XXX)" -+ depends on CPU_CAVIUM_OCTEON -+ default y -+ help -+ This option enables the ethernet driver for the management port on -+ CN52XX, CN57XX, CN56XX, CN55XX, and CN54XX chips. -+ - source "drivers/net/fs_enet/Kconfig" - - endif # NET_ETHERNET ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -234,6 +234,7 @@ pasemi_mac_driver-objs := pasemi_mac.o p - obj-$(CONFIG_MLX4_CORE) += mlx4/ - obj-$(CONFIG_ENC28J60) += enc28j60.o - obj-$(CONFIG_ETHOC) += ethoc.o -+obj-$(CONFIG_OCTEON_MGMT) += octeon/ - - obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o - ---- /dev/null -+++ b/drivers/net/octeon/Makefile -@@ -0,0 +1,11 @@ -+# Makefile for the Cavium OCTEON Ethernet drivers. -+# -+# This file is subject to the terms and conditions of the GNU General Public -+# License. See the file "COPYING" in the main directory of this archive -+# for more details. -+# -+# Copyright (C) 2008 Cavium Networks -+ -+obj-$(CONFIG_OCTEON_MGMT) += octeon_mgmt.o -+ -+octeon_mgmt-objs := octeon-mgmt-port.o cvmx-mgmt-port.o -\ No newline at end of file ---- /dev/null -+++ b/drivers/net/octeon/cvmx-mgmt-port.c -@@ -0,0 +1,818 @@ -+/***********************license start*************** -+ * Author: Cavium Networks -+ * -+ * Contact: support@caviumnetworks.com -+ * This file is part of the OCTEON SDK -+ * -+ * Copyright (c) 2003-2008 Cavium Networks -+ * -+ * This file is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, Version 2, as -+ * published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful, but -+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty -+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or -+ * NONINFRINGEMENT. See the GNU General Public License for more -+ * details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this file; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ * or visit http://www.gnu.org/licenses/. -+ * -+ * This file may also be available under a different license from Cavium. -+ * Contact Cavium Networks for more information -+ ***********************license end**************************************/ -+ -+/** -+ * -+ * Support functions for managing the MII management port -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "cvmx-mgmt-port.h" -+ -+#define CVMX_MGMT_PORT_NUM_PORTS 2 -+/* Number of TX ring buffer entries and buffers */ -+#define CVMX_MGMT_PORT_NUM_TX_BUFFERS 16 -+/* Number of RX ring buffer entries and buffers */ -+#define CVMX_MGMT_PORT_NUM_RX_BUFFERS 128 -+ -+#define CVMX_MGMT_PORT_TX_BUFFER_SIZE 12288 -+#define CVMX_MGMT_PORT_RX_BUFFER_SIZE 1536 -+ -+/** -+ * Format of the TX/RX ring buffer entries -+ */ -+union cvmx_mgmt_port_ring_entry { -+ uint64_t u64; -+ struct { -+ uint64_t reserved_62_63:2; -+ /* Length of the buffer/packet in bytes */ -+ uint64_t len:14; -+ /* The RX error code */ -+ uint64_t code:8; -+ /* Physical address of the buffer */ -+ uint64_t addr:40; -+ } s; -+}; -+ -+/** -+ * Per port state required for each mgmt port -+ */ -+struct cvmx_mgmt_port_state { -+ /* Used for exclusive access to this structure */ -+ cvmx_spinlock_t lock; -+ /* Where the next TX will write in the tx_ring and tx_buffers */ -+ int tx_write_index; -+ /* Where the next RX will be in the rx_ring and rx_buffers */ -+ int rx_read_index; -+ /* The SMI/MDIO PHY address */ -+ int phy_id; -+ /* Our MAC address */ -+ uint64_t mac; -+ union cvmx_mgmt_port_ring_entry tx_ring[CVMX_MGMT_PORT_NUM_TX_BUFFERS]; -+ union cvmx_mgmt_port_ring_entry rx_ring[CVMX_MGMT_PORT_NUM_RX_BUFFERS]; -+ char tx_buffers[CVMX_MGMT_PORT_NUM_TX_BUFFERS] -+ [CVMX_MGMT_PORT_TX_BUFFER_SIZE]; -+ char rx_buffers[CVMX_MGMT_PORT_NUM_RX_BUFFERS] -+ [CVMX_MGMT_PORT_RX_BUFFER_SIZE]; -+}; -+ -+/** -+ * Pointers to each mgmt port's state -+ */ -+struct cvmx_mgmt_port_state *cvmx_mgmt_port_state_ptr; -+ -+/** -+ * Return the number of management ports supported by this chip -+ * -+ * Returns Number of ports -+ */ -+int __cvmx_mgmt_port_num_ports(void) -+{ -+ if (OCTEON_IS_MODEL(OCTEON_CN56XX)) -+ return 1; -+ else if (OCTEON_IS_MODEL(OCTEON_CN52XX)) -+ return 2; -+ else -+ return 0; -+} -+ -+/** -+ * Called to initialize a management port for use. Multiple calls -+ * to this function accross applications is safe. -+ * -+ * @port: Port to initialize -+ * -+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code -+ */ -+enum cvmx_mgmt_port_result cvmx_mgmt_port_initialize(int port) -+{ -+ char *alloc_name = "cvmx_mgmt_port"; -+ union cvmx_mixx_oring1 oring1; -+ union cvmx_mixx_ctl mix_ctl; -+ -+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports())) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ cvmx_mgmt_port_state_ptr = -+ cvmx_bootmem_alloc_named(CVMX_MGMT_PORT_NUM_PORTS * -+ sizeof(struct cvmx_mgmt_port_state), 128, -+ alloc_name); -+ if (cvmx_mgmt_port_state_ptr) { -+ memset(cvmx_mgmt_port_state_ptr, 0, -+ CVMX_MGMT_PORT_NUM_PORTS * -+ sizeof(struct cvmx_mgmt_port_state)); -+ } else { -+ struct cvmx_bootmem_named_block_desc *block_desc = -+ cvmx_bootmem_find_named_block(alloc_name); -+ if (block_desc) -+ cvmx_mgmt_port_state_ptr = -+ cvmx_phys_to_ptr(block_desc->base_addr); -+ else { -+ cvmx_dprintf("ERROR: cvmx_mgmt_port_initialize: " -+ "Unable to get named block %s.\n", -+ alloc_name); -+ return CVMX_MGMT_PORT_NO_MEMORY; -+ } -+ } -+ -+ /* -+ * Reset the MIX block if the previous user had a different TX -+ * ring size. -+ */ -+ mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port)); -+ if (!mix_ctl.s.reset) { -+ oring1.u64 = cvmx_read_csr(CVMX_MIXX_ORING1(port)); -+ if (oring1.s.osize != CVMX_MGMT_PORT_NUM_TX_BUFFERS) { -+ mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port)); -+ mix_ctl.s.en = 0; -+ cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64); -+ do { -+ mix_ctl.u64 = -+ cvmx_read_csr(CVMX_MIXX_CTL(port)); -+ } while (mix_ctl.s.busy); -+ mix_ctl.s.reset = 1; -+ cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64); -+ cvmx_read_csr(CVMX_MIXX_CTL(port)); -+ memset(cvmx_mgmt_port_state_ptr + port, 0, -+ sizeof(struct cvmx_mgmt_port_state)); -+ } -+ } -+ -+ if (cvmx_mgmt_port_state_ptr[port].tx_ring[0].u64 == 0) { -+ struct cvmx_mgmt_port_state *state = -+ cvmx_mgmt_port_state_ptr + port; -+ int i; -+ union cvmx_mixx_bist mix_bist; -+ union cvmx_agl_gmx_bist agl_gmx_bist; -+ union cvmx_mixx_oring1 oring1; -+ union cvmx_mixx_iring1 iring1; -+ union cvmx_mixx_ctl mix_ctl; -+ -+ /* Make sure BIST passed */ -+ mix_bist.u64 = cvmx_read_csr(CVMX_MIXX_BIST(port)); -+ if (mix_bist.u64) -+ cvmx_dprintf("WARNING: cvmx_mgmt_port_initialize: " -+ "Managment port MIX failed BIST " -+ "(0x%016llx)\n", -+ (unsigned long long)mix_bist.u64); -+ -+ agl_gmx_bist.u64 = cvmx_read_csr(CVMX_AGL_GMX_BIST); -+ if (agl_gmx_bist.u64) -+ cvmx_dprintf("WARNING: cvmx_mgmt_port_initialize: " -+ "Managment port AGL failed BIST " -+ "(0x%016llx)\n", -+ (unsigned long long)agl_gmx_bist.u64); -+ -+ /* Clear all state information */ -+ memset(state, 0, sizeof(*state)); -+ -+ /* Take the control logic out of reset */ -+ mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port)); -+ mix_ctl.s.reset = 0; -+ cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64); -+ -+ /* Set the PHY address */ -+ if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) -+ state->phy_id = -1; -+ else -+ /* Will need to be change to match the board */ -+ state->phy_id = port; -+ -+ /* Create a default MAC address */ -+ state->mac = 0x000000dead000000ull; -+ state->mac += 0xffffff & CAST64(state); -+ -+ /* Setup the TX ring */ -+ for (i = 0; i < CVMX_MGMT_PORT_NUM_TX_BUFFERS; i++) { -+ state->tx_ring[i].s.len = CVMX_MGMT_PORT_TX_BUFFER_SIZE; -+ state->tx_ring[i].s.addr = -+ cvmx_ptr_to_phys(state->tx_buffers[i]); -+ } -+ -+ /* Tell the HW where the TX ring is */ -+ oring1.u64 = 0; -+ oring1.s.obase = cvmx_ptr_to_phys(state->tx_ring) >> 3; -+ oring1.s.osize = CVMX_MGMT_PORT_NUM_TX_BUFFERS; -+ CVMX_SYNCWS; -+ cvmx_write_csr(CVMX_MIXX_ORING1(port), oring1.u64); -+ -+ /* Setup the RX ring */ -+ for (i = 0; i < CVMX_MGMT_PORT_NUM_RX_BUFFERS; i++) { -+ /* This size is -8 due to an errata for CN56XX pass 1 */ -+ state->rx_ring[i].s.len = -+ CVMX_MGMT_PORT_RX_BUFFER_SIZE - 8; -+ state->rx_ring[i].s.addr = -+ cvmx_ptr_to_phys(state->rx_buffers[i]); -+ } -+ -+ /* Tell the HW where the RX ring is */ -+ iring1.u64 = 0; -+ iring1.s.ibase = cvmx_ptr_to_phys(state->rx_ring) >> 3; -+ iring1.s.isize = CVMX_MGMT_PORT_NUM_RX_BUFFERS; -+ CVMX_SYNCWS; -+ cvmx_write_csr(CVMX_MIXX_IRING1(port), iring1.u64); -+ cvmx_write_csr(CVMX_MIXX_IRING2(port), -+ CVMX_MGMT_PORT_NUM_RX_BUFFERS); -+ -+ /* Disable the external input/output */ -+ cvmx_mgmt_port_disable(port); -+ -+ /* Set the MAC address filtering up */ -+ cvmx_mgmt_port_set_mac(port, state->mac); -+ -+ /* -+ * Set the default max size to an MTU of 1500 with L2 -+ * and VLAN. -+ */ -+ cvmx_mgmt_port_set_max_packet_size(port, 1518); -+ -+ /* -+ * Enable the port HW. Packets are not allowed until -+ * cvmx_mgmt_port_enable() is called. -+ */ -+ mix_ctl.u64 = 0; -+ /* Strip the ending CRC */ -+ mix_ctl.s.crc_strip = 1; -+ /* Enable the port */ -+ mix_ctl.s.en = 1; -+ /* Arbitration mode */ -+ mix_ctl.s.nbtarb = 0; -+ /* MII CB-request FIFO programmable high watermark */ -+ mix_ctl.s.mrq_hwm = 1; -+ cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64); -+ -+ if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) -+ || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { -+ /* -+ * Force compensation values, as they are not -+ * determined properly by HW. -+ */ -+ union cvmx_agl_gmx_drv_ctl drv_ctl; -+ -+ drv_ctl.u64 = cvmx_read_csr(CVMX_AGL_GMX_DRV_CTL); -+ if (port) { -+ drv_ctl.s.byp_en1 = 1; -+ drv_ctl.s.nctl1 = 6; -+ drv_ctl.s.pctl1 = 6; -+ } else { -+ drv_ctl.s.byp_en = 1; -+ drv_ctl.s.nctl = 6; -+ drv_ctl.s.pctl = 6; -+ } -+ cvmx_write_csr(CVMX_AGL_GMX_DRV_CTL, drv_ctl.u64); -+ } -+ } -+ return CVMX_MGMT_PORT_SUCCESS; -+} -+ -+/** -+ * Shutdown a management port. This currently disables packet IO -+ * but leaves all hardware and buffers. Another application can then -+ * call initialize() without redoing the hardware setup. -+ * -+ * @port: Management port -+ * -+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code -+ */ -+enum cvmx_mgmt_port_result cvmx_mgmt_port_shutdown(int port) -+{ -+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports())) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ /* Stop packets from comming in */ -+ cvmx_mgmt_port_disable(port); -+ -+ /* -+ * We don't free any memory so the next intialize can reuse -+ * the HW setup. -+ */ -+ return CVMX_MGMT_PORT_SUCCESS; -+} -+ -+/** -+ * Enable packet IO on a management port -+ * -+ * @port: Management port -+ * -+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code -+ */ -+enum cvmx_mgmt_port_result cvmx_mgmt_port_enable(int port) -+{ -+ struct cvmx_mgmt_port_state *state; -+ union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx; -+ union cvmx_agl_gmx_inf_mode agl_gmx_inf_mode; -+ union cvmx_agl_gmx_rxx_frm_ctl rxx_frm_ctl; -+ -+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports())) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ state = cvmx_mgmt_port_state_ptr + port; -+ -+ cvmx_spinlock_lock(&state->lock); -+ -+ rxx_frm_ctl.u64 = 0; -+ rxx_frm_ctl.s.pre_align = 1; -+ /* -+ * When set, disables the length check for non-min sized pkts -+ * with padding in the client data. -+ */ -+ rxx_frm_ctl.s.pad_len = 1; -+ /* When set, disables the length check for VLAN pkts */ -+ rxx_frm_ctl.s.vlan_len = 1; -+ /* When set, PREAMBLE checking is less strict */ -+ rxx_frm_ctl.s.pre_free = 1; -+ /* Control Pause Frames can match station SMAC */ -+ rxx_frm_ctl.s.ctl_smac = 0; -+ /* Control Pause Frames can match globally assign Multicast address */ -+ rxx_frm_ctl.s.ctl_mcst = 1; -+ /* Forward pause information to TX block */ -+ rxx_frm_ctl.s.ctl_bck = 1; -+ /* Drop Control Pause Frames */ -+ rxx_frm_ctl.s.ctl_drp = 1; -+ /* Strip off the preamble */ -+ rxx_frm_ctl.s.pre_strp = 1; -+ /* -+ * This port is configured to send PREAMBLE+SFD to begin every -+ * frame. GMX checks that the PREAMBLE is sent correctly. -+ */ -+ rxx_frm_ctl.s.pre_chk = 1; -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_CTL(port), rxx_frm_ctl.u64); -+ -+ /* Enable the AGL block */ -+ agl_gmx_inf_mode.u64 = 0; -+ agl_gmx_inf_mode.s.en = 1; -+ cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64); -+ -+ /* Configure the port duplex and enables */ -+ agl_gmx_prtx.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); -+ agl_gmx_prtx.s.tx_en = 1; -+ agl_gmx_prtx.s.rx_en = 1; -+ if (cvmx_mgmt_port_get_link(port) < 0) -+ agl_gmx_prtx.s.duplex = 0; -+ else -+ agl_gmx_prtx.s.duplex = 1; -+ agl_gmx_prtx.s.en = 1; -+ cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64); -+ -+ cvmx_spinlock_unlock(&state->lock); -+ return CVMX_MGMT_PORT_SUCCESS; -+} -+ -+/** -+ * Disable packet IO on a management port -+ * -+ * @port: Management port -+ * -+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code -+ */ -+enum cvmx_mgmt_port_result cvmx_mgmt_port_disable(int port) -+{ -+ struct cvmx_mgmt_port_state *state; -+ union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx; -+ -+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports())) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ state = cvmx_mgmt_port_state_ptr + port; -+ -+ cvmx_spinlock_lock(&state->lock); -+ -+ agl_gmx_prtx.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); -+ agl_gmx_prtx.s.en = 0; -+ cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64); -+ -+ cvmx_spinlock_unlock(&state->lock); -+ return CVMX_MGMT_PORT_SUCCESS; -+} -+ -+/** -+ * Send a packet out the management port. The packet is copied so -+ * the input buffer isn't used after this call. -+ * -+ * @port: Management port -+ * @packet_len: Length of the packet to send. It does not include the final CRC -+ * @buffer: Packet data -+ * -+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code -+ */ -+enum cvmx_mgmt_port_result cvmx_mgmt_port_send(int port, int packet_len, -+ void *buffer) -+{ -+ struct cvmx_mgmt_port_state *state; -+ union cvmx_mixx_oring2 mix_oring2; -+ -+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports())) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ /* Max sure the packet size is valid */ -+ if ((packet_len < 1) || (packet_len > CVMX_MGMT_PORT_TX_BUFFER_SIZE)) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ if (buffer == NULL) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ state = cvmx_mgmt_port_state_ptr + port; -+ -+ cvmx_spinlock_lock(&state->lock); -+ -+ mix_oring2.u64 = cvmx_read_csr(CVMX_MIXX_ORING2(port)); -+ if (mix_oring2.s.odbell >= CVMX_MGMT_PORT_NUM_TX_BUFFERS - 1) { -+ /* No room for another packet */ -+ cvmx_spinlock_unlock(&state->lock); -+ return CVMX_MGMT_PORT_NO_MEMORY; -+ } else { -+ /* Copy the packet into the output buffer */ -+ memcpy(state->tx_buffers[state->tx_write_index], buffer, -+ packet_len); -+ /* Insert the source MAC */ -+ memcpy(state->tx_buffers[state->tx_write_index] + 6, -+ ((char *)&state->mac) + 2, 6); -+ /* Update the TX ring buffer entry size */ -+ state->tx_ring[state->tx_write_index].s.len = packet_len; -+ /* Increment our TX index */ -+ state->tx_write_index = -+ (state->tx_write_index + 1) % CVMX_MGMT_PORT_NUM_TX_BUFFERS; -+ /* Ring the doorbell, send ing the packet */ -+ CVMX_SYNCWS; -+ cvmx_write_csr(CVMX_MIXX_ORING2(port), 1); -+ if (cvmx_read_csr(CVMX_MIXX_ORCNT(port))) -+ cvmx_write_csr(CVMX_MIXX_ORCNT(port), -+ cvmx_read_csr(CVMX_MIXX_ORCNT(port))); -+ -+ cvmx_spinlock_unlock(&state->lock); -+ return CVMX_MGMT_PORT_SUCCESS; -+ } -+} -+ -+/** -+ * Receive a packet from the management port. -+ * -+ * @port: Management port -+ * @buffer_len: Size of the buffer to receive the packet into -+ * @buffer: Buffer to receive the packet into -+ * -+ * Returns The size of the packet, or a negative erorr code on failure. Zero -+ * means that no packets were available. -+ */ -+int cvmx_mgmt_port_receive(int port, int buffer_len, void *buffer) -+{ -+ union cvmx_mixx_ircnt mix_ircnt; -+ struct cvmx_mgmt_port_state *state; -+ int result; -+ -+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports())) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ /* Max sure the buffer size is valid */ -+ if (buffer_len < 1) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ if (buffer == NULL) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ state = cvmx_mgmt_port_state_ptr + port; -+ -+ cvmx_spinlock_lock(&state->lock); -+ -+ /* Find out how many RX packets are pending */ -+ mix_ircnt.u64 = cvmx_read_csr(CVMX_MIXX_IRCNT(port)); -+ if (mix_ircnt.s.ircnt) { -+ void *source = state->rx_buffers[state->rx_read_index]; -+ uint64_t *zero_check = source; -+ /* -+ * CN56XX pass 1 has an errata where packets might -+ * start 8 bytes into the buffer instead of at their -+ * correct location. If the first 8 bytes is zero we -+ * assume this has happened. -+ */ -+ if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) -+ && (*zero_check == 0)) -+ source += 8; -+ /* Start off with zero bytes received */ -+ result = 0; -+ /* -+ * While the completion code signals more data, copy -+ * the buffers into the user's data. -+ */ -+ while (state->rx_ring[state->rx_read_index].s.code == 16) { -+ /* Only copy what will fit in the user's buffer */ -+ int length = state->rx_ring[state->rx_read_index].s.len; -+ if (length > buffer_len) -+ length = buffer_len; -+ memcpy(buffer, source, length); -+ /* -+ * Reduce the size of the buffer to the -+ * remaining space. If we run out we will -+ * signal an error when the code 15 buffer -+ * doesn't fit. -+ */ -+ buffer += length; -+ buffer_len -= length; -+ result += length; -+ /* -+ * Update this buffer for reuse in future -+ * receives. This size is -8 due to an errata -+ * for CN56XX pass 1. -+ */ -+ state->rx_ring[state->rx_read_index].s.code = 0; -+ state->rx_ring[state->rx_read_index].s.len = -+ CVMX_MGMT_PORT_RX_BUFFER_SIZE - 8; -+ state->rx_read_index = -+ (state->rx_read_index + -+ 1) % CVMX_MGMT_PORT_NUM_RX_BUFFERS; -+ /* -+ * Zero the beginning of the buffer for use by -+ * the errata check. -+ */ -+ *zero_check = 0; -+ CVMX_SYNCWS; -+ /* Increment the number of RX buffers */ -+ cvmx_write_csr(CVMX_MIXX_IRING2(port), 1); -+ source = state->rx_buffers[state->rx_read_index]; -+ zero_check = source; -+ } -+ -+ /* Check for the final good completion code */ -+ if (state->rx_ring[state->rx_read_index].s.code == 15) { -+ if (buffer_len >= -+ state->rx_ring[state->rx_read_index].s.len) { -+ int length = -+ state->rx_ring[state->rx_read_index].s.len; -+ memcpy(buffer, source, length); -+ result += length; -+ } else { -+ /* Not enough room for the packet */ -+ cvmx_dprintf("ERROR: cvmx_mgmt_port_receive: " -+ "Packet (%d) larger than " -+ "supplied buffer (%d)\n", -+ state->rx_ring[state->rx_read_index].s.len, -+ buffer_len); -+ result = CVMX_MGMT_PORT_NO_MEMORY; -+ } -+ } else { -+ union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx; -+ cvmx_dprintf("ERROR: cvmx_mgmt_port_receive: Receive " -+ "error code %d. Packet dropped(Len %d)\n", -+ state->rx_ring[state->rx_read_index].s.code, -+ state->rx_ring[state->rx_read_index].s.len + -+ result); -+ result = -state->rx_ring[state->rx_read_index].s.code; -+ -+ /* Check to see if we need to change the duplex. */ -+ agl_gmx_prtx.u64 = -+ cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); -+ if (cvmx_mgmt_port_get_link(port) < 0) -+ agl_gmx_prtx.s.duplex = 0; -+ else -+ agl_gmx_prtx.s.duplex = 1; -+ cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), -+ agl_gmx_prtx.u64); -+ } -+ -+ /* -+ * Clean out the ring buffer entry. This size is -8 -+ * due to an errata for CN56XX pass 1. -+ */ -+ state->rx_ring[state->rx_read_index].s.code = 0; -+ state->rx_ring[state->rx_read_index].s.len = -+ CVMX_MGMT_PORT_RX_BUFFER_SIZE - 8; -+ state->rx_read_index = -+ (state->rx_read_index + 1) % CVMX_MGMT_PORT_NUM_RX_BUFFERS; -+ /* -+ * Zero the beginning of the buffer for use by the -+ * errata check. -+ */ -+ *zero_check = 0; -+ CVMX_SYNCWS; -+ /* Increment the number of RX buffers */ -+ cvmx_write_csr(CVMX_MIXX_IRING2(port), 1); -+ /* Decrement the pending RX count */ -+ cvmx_write_csr(CVMX_MIXX_IRCNT(port), 1); -+ } else { -+ /* No packets available */ -+ result = 0; -+ } -+ cvmx_spinlock_unlock(&state->lock); -+ return result; -+} -+ -+/** -+ * Get the management port link status: -+ * 100 = 100Mbps, full duplex -+ * 10 = 10Mbps, full duplex -+ * 0 = Link down -+ * -10 = 10Mpbs, half duplex -+ * -100 = 100Mbps, half duplex -+ * -+ * @port: Management port -+ * -+ * Returns -+ */ -+int cvmx_mgmt_port_get_link(int port) -+{ -+ struct cvmx_mgmt_port_state *state; -+ int phy_status; -+ int duplex; -+ -+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports())) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ state = cvmx_mgmt_port_state_ptr + port; -+ -+ /* Assume 100Mbps if we don't know the PHY address */ -+ if (state->phy_id == -1) -+ return 100; -+ -+ /* Read the PHY state */ -+ phy_status = -+ cvmx_mdio_read(state->phy_id >> 8, state->phy_id & 0xff, 17); -+ -+ /* Only return a link if the PHY has finished auto negotiation -+ and set the resolved bit (bit 11) */ -+ if (!(phy_status & (1 << 11))) -+ return 0; -+ -+ /* Create multiple factor to represent duplex */ -+ if ((phy_status >> 13) & 1) -+ duplex = 1; -+ else -+ duplex = -1; -+ -+ /* Speed is encoded on bits 15-14 */ -+ switch ((phy_status >> 14) & 3) { -+ case 0: /* 10 Mbps */ -+ return 10 * duplex; -+ case 1: /* 100 Mbps */ -+ return 100 * duplex; -+ default: -+ return 0; -+ } -+} -+ -+/** -+ * Set the MAC address for a management port -+ * -+ * @port: Management port -+ * @mac: New MAC address. The lower 6 bytes are used. -+ * -+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code -+ */ -+enum cvmx_mgmt_port_result cvmx_mgmt_port_set_mac(int port, uint64_t mac) -+{ -+ struct cvmx_mgmt_port_state *state; -+ union cvmx_agl_gmx_rxx_adr_ctl agl_gmx_rxx_adr_ctl; -+ -+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports())) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ state = cvmx_mgmt_port_state_ptr + port; -+ -+ cvmx_spinlock_lock(&state->lock); -+ -+ agl_gmx_rxx_adr_ctl.u64 = 0; -+ /* Only accept matching MAC addresses */ -+ agl_gmx_rxx_adr_ctl.s.cam_mode = 1; -+ /* Drop multicast */ -+ agl_gmx_rxx_adr_ctl.s.mcst = 0; -+ /* Allow broadcast */ -+ agl_gmx_rxx_adr_ctl.s.bcst = 1; -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port), agl_gmx_rxx_adr_ctl.u64); -+ -+ /* Only using one of the CAMs */ -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM0(port), (mac >> 40) & 0xff); -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM1(port), (mac >> 32) & 0xff); -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM2(port), (mac >> 24) & 0xff); -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM3(port), (mac >> 16) & 0xff); -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM4(port), (mac >> 8) & 0xff); -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM5(port), (mac >> 0) & 0xff); -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), 1); -+ state->mac = mac; -+ -+ cvmx_spinlock_unlock(&state->lock); -+ return CVMX_MGMT_PORT_SUCCESS; -+} -+ -+/** -+ * Get the MAC address for a management port -+ * -+ * @port: Management port -+ * -+ * Returns MAC address -+ */ -+uint64_t cvmx_mgmt_port_get_mac(int port) -+{ -+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports())) -+ return CVMX_MGMT_PORT_INVALID_PARAM; -+ -+ return cvmx_mgmt_port_state_ptr[port].mac; -+} -+ -+/** -+ * Set the multicast list. -+ * -+ * @port: Management port -+ * @flags: Interface flags -+ * -+ * Returns -+ */ -+void cvmx_mgmt_port_set_multicast_list(int port, int flags) -+{ -+ struct cvmx_mgmt_port_state *state; -+ union cvmx_agl_gmx_rxx_adr_ctl agl_gmx_rxx_adr_ctl; -+ -+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports())) -+ return; -+ -+ state = cvmx_mgmt_port_state_ptr + port; -+ -+ cvmx_spinlock_lock(&state->lock); -+ -+ agl_gmx_rxx_adr_ctl.u64 = cvmx_read_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port)); -+ -+ /* Allow broadcast MAC addresses */ -+ if (!agl_gmx_rxx_adr_ctl.s.bcst) -+ agl_gmx_rxx_adr_ctl.s.bcst = 1; -+ -+ if ((flags & CVMX_IFF_ALLMULTI) || (flags & CVMX_IFF_PROMISC)) -+ /* Force accept multicast packets */ -+ agl_gmx_rxx_adr_ctl.s.mcst = 2; -+ else -+ /* Force reject multicast packets */ -+ agl_gmx_rxx_adr_ctl.s.mcst = 1; -+ -+ if (flags & CVMX_IFF_PROMISC) -+ /* -+ * Reject matches if promisc. Since CAM is shut off, -+ * should accept everything. -+ */ -+ agl_gmx_rxx_adr_ctl.s.cam_mode = 0; -+ else -+ /* Filter packets based on the CAM */ -+ agl_gmx_rxx_adr_ctl.s.cam_mode = 1; -+ -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port), agl_gmx_rxx_adr_ctl.u64); -+ -+ if (flags & CVMX_IFF_PROMISC) -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), 0); -+ else -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), 1); -+ -+ cvmx_spinlock_unlock(&state->lock); -+} -+ -+/** -+ * Set the maximum packet allowed in. Size is specified -+ * including L2 but without FCS. A normal MTU would corespond -+ * to 1514 assuming the standard 14 byte L2 header. -+ * -+ * @port: Management port -+ * @size_without_fcs: -+ * Size in bytes without FCS -+ */ -+void cvmx_mgmt_port_set_max_packet_size(int port, int size_without_fcs) -+{ -+ struct cvmx_mgmt_port_state *state; -+ -+ if ((port < 0) || (port >= __cvmx_mgmt_port_num_ports())) -+ return; -+ -+ state = cvmx_mgmt_port_state_ptr + port; -+ -+ cvmx_spinlock_lock(&state->lock); -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_MAX(port), size_without_fcs); -+ cvmx_write_csr(CVMX_AGL_GMX_RXX_JABBER(port), -+ (size_without_fcs + 7) & 0xfff8); -+ cvmx_spinlock_unlock(&state->lock); -+} ---- /dev/null -+++ b/drivers/net/octeon/cvmx-mgmt-port.h -@@ -0,0 +1,168 @@ -+/***********************license start*************** -+ * Author: Cavium Networks -+ * -+ * Contact: support@caviumnetworks.com -+ * This file is part of the OCTEON SDK -+ * -+ * Copyright (c) 2003-2008 Cavium Networks -+ * -+ * This file is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, Version 2, as -+ * published by the Free Software Foundation. -+ * -+ * This file is distributed in the hope that it will be useful, but -+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty -+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or -+ * NONINFRINGEMENT. See the GNU General Public License for more -+ * details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this file; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ * or visit http://www.gnu.org/licenses/. -+ * -+ * This file may also be available under a different license from Cavium. -+ * Contact Cavium Networks for more information -+ ***********************license end**************************************/ -+ -+/** -+ * -+ * Support functions for managing the MII management port -+ * -+ */ -+ -+#ifndef __CVMX_MGMT_PORT_H__ -+#define __CVMX_MGMT_PORT_H__ -+ -+enum cvmx_mgmt_port_result { -+ CVMX_MGMT_PORT_SUCCESS = 0, -+ CVMX_MGMT_PORT_NO_MEMORY = -1, -+ CVMX_MGMT_PORT_INVALID_PARAM = -2, -+}; -+ -+/* Enumeration of Net Device interface flags. */ -+enum cvmx_mgmt_port_netdevice_flags { -+ CVMX_IFF_PROMISC = 0x100, /* receive all packets */ -+ CVMX_IFF_ALLMULTI = 0x200, /* receive all multicast packets */ -+}; -+ -+/** -+ * Called to initialize a management port for use. Multiple calls -+ * to this function accross applications is safe. -+ * -+ * @port: Port to initialize -+ * -+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code -+ */ -+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_initialize(int port); -+ -+/** -+ * Shutdown a management port. This currently disables packet IO -+ * but leaves all hardware and buffers. Another application can then -+ * call initialize() without redoing the hardware setup. -+ * -+ * @port: Management port -+ * -+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code -+ */ -+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_shutdown(int port); -+ -+/** -+ * Enable packet IO on a management port -+ * -+ * @port: Management port -+ * -+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code -+ */ -+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_enable(int port); -+ -+/** -+ * Disable packet IO on a management port -+ * -+ * @port: Management port -+ * -+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code -+ */ -+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_disable(int port); -+ -+/** -+ * Send a packet out the management port. The packet is copied so -+ * the input buffer isn't used after this call. -+ * -+ * @port: Management port -+ * @packet_len: Length of the packet to send. It does not include the final CRC -+ * @buffer: Packet data -+ * -+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code -+ */ -+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_send(int port, int packet_len, -+ void *buffer); -+ -+/** -+ * Receive a packet from the management port. -+ * -+ * @port: Management port -+ * @buffer_len: Size of the buffer to receive the packet into -+ * @buffer: Buffer to receive the packet into -+ * -+ * Returns The size of the packet, or a negative erorr code on failure. Zero -+ * means that no packets were available. -+ */ -+extern int cvmx_mgmt_port_receive(int port, int buffer_len, void *buffer); -+ -+/** -+ * Get the management port link status: -+ * 100 = 100Mbps, full duplex -+ * 10 = 10Mbps, full duplex -+ * 0 = Link down -+ * -10 = 10Mpbs, half duplex -+ * -100 = 100Mbps, half duplex -+ * -+ * @port: Management port -+ * -+ * Returns -+ */ -+extern int cvmx_mgmt_port_get_link(int port); -+ -+/** -+ * Set the MAC address for a management port -+ * -+ * @port: Management port -+ * @mac: New MAC address. The lower 6 bytes are used. -+ * -+ * Returns CVMX_MGMT_PORT_SUCCESS or an error code -+ */ -+extern enum cvmx_mgmt_port_result cvmx_mgmt_port_set_mac(int port, -+ uint64_t mac); -+ -+/** -+ * Get the MAC address for a management port -+ * -+ * @port: Management port -+ * -+ * Returns MAC address -+ */ -+extern uint64_t cvmx_mgmt_port_get_mac(int port); -+ -+/** -+ * Set the multicast list. -+ * -+ * @port: Management port -+ * @flags: Interface flags -+ * -+ * Returns -+ */ -+extern void cvmx_mgmt_port_set_multicast_list(int port, int flags); -+ -+/** -+ * Set the maximum packet allowed in. Size is specified -+ * including L2 but without FCS. A normal MTU would corespond -+ * to 1514 assuming the standard 14 byte L2 header. -+ * -+ * @port: Management port -+ * @size_without_crc: -+ * Size in bytes without FCS -+ */ -+extern void cvmx_mgmt_port_set_max_packet_size(int port, int size_without_fcs); -+ -+#endif /* __CVMX_MGMT_PORT_H__ */ ---- /dev/null -+++ b/drivers/net/octeon/octeon-mgmt-port.c -@@ -0,0 +1,389 @@ -+/* -+ * Octeon Management Port Ethernet Driver -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2007, 2008 Cavium Networks -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include "cvmx-mgmt-port.h" -+ -+static struct net_device *global_dev[2] = { NULL, NULL }; -+ -+#define DEBUGPRINT(format, ...) do {if (printk_ratelimit()) \ -+ printk(format, ##__VA_ARGS__); \ -+ } while (0) -+ -+/** -+ * This is the definition of the Ethernet driver's private -+ * driver state stored in dev->priv. -+ */ -+struct device_private { -+ int port; -+ struct net_device_stats stats; /* Device statistics */ -+}; -+ -+ -+/** -+ * Packet transmit -+ * -+ * @param skb Packet to send -+ * @param dev Device info structure -+ * @return Always returns zero -+ */ -+static int packet_transmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ uint64_t flags; -+ struct device_private *priv = netdev_priv(dev); -+ enum cvmx_mgmt_port_result result; -+ local_irq_save(flags); -+ result = cvmx_mgmt_port_send(priv->port, skb->len, skb->data); -+ local_irq_restore(flags); -+ if (result == CVMX_MGMT_PORT_SUCCESS) { -+ priv->stats.tx_packets++; -+ priv->stats.tx_bytes += skb->len; -+ } else { -+ /* DEBUGPRINT("ERROR: cvmx_mgmt_port_send() failed with %d\n", -+ result); -+ */ -+ priv->stats.tx_dropped++; -+ } -+ dev_kfree_skb(skb); -+ return 0; -+} -+ -+ -+/** -+ * Interrupt handler. The interrupt occurs whenever the POW -+ * transitions from 0->1 packets in our group. -+ * -+ * @param cpl -+ * @param dev_id -+ * @param regs -+ * @return -+ */ -+static irqreturn_t do_interrupt(int cpl, void *dev_id) -+{ -+ uint64_t flags; -+ struct sk_buff *skb; -+ int result; -+ char packet[2048]; -+ struct net_device *dev = (struct net_device *) dev_id; -+ struct device_private *priv = netdev_priv(dev); -+ -+ do { -+ local_irq_save(flags); -+ result = cvmx_mgmt_port_receive(priv->port, sizeof(packet), -+ packet); -+ local_irq_restore(flags); -+ -+ /* Silently drop packets if we aren't up */ -+ if ((dev->flags & IFF_UP) == 0) -+ continue; -+ -+ if (result > 0) { -+ skb = dev_alloc_skb(result); -+ if (skb) { -+ memcpy(skb_put(skb, result), packet, result); -+ skb->protocol = eth_type_trans(skb, dev); -+ skb->dev = dev; -+ skb->ip_summed = CHECKSUM_NONE; -+ priv->stats.rx_bytes += skb->len; -+ priv->stats.rx_packets++; -+ netif_rx(skb); -+ } else { -+ DEBUGPRINT("%s: Failed to allocate skbuff, " -+ "packet dropped\n", -+ dev->name); -+ priv->stats.rx_dropped++; -+ } -+ } else if (result < 0) { -+ DEBUGPRINT("%s: Receive error code %d, packet " -+ "dropped\n", -+ dev->name, result); -+ priv->stats.rx_errors++; -+ } -+ } while (result != 0); -+ -+ /* Clear any pending interrupts */ -+ cvmx_write_csr(CVMX_MIXX_ISR(priv->port), -+ cvmx_read_csr(CVMX_MIXX_ISR(priv->port))); -+ cvmx_read_csr(CVMX_MIXX_ISR(priv->port)); -+ -+ return IRQ_HANDLED; -+} -+ -+ -+#ifdef CONFIG_NET_POLL_CONTROLLER -+/** -+ * This is called when the kernel needs to manually poll the -+ * device. For Octeon, this is simply calling the interrupt -+ * handler. We actually poll all the devices, not just the -+ * one supplied. -+ * -+ * @param dev Device to poll. Unused -+ */ -+static void device_poll_controller(struct net_device *dev) -+{ -+ do_interrupt(0, dev); -+} -+#endif -+ -+ -+/** -+ * Open a device for use. Device should be able to send and -+ * receive packets after this is called. -+ * -+ * @param dev Device to bring up -+ * @return Zero on success -+ */ -+static int device_open(struct net_device *dev) -+{ -+ /* Clear the statistics whenever the interface is brought up */ -+ struct device_private *priv = netdev_priv(dev); -+ memset(&priv->stats, 0, sizeof(priv->stats)); -+ cvmx_mgmt_port_enable(priv->port); -+ return 0; -+} -+ -+ -+/** -+ * Stop an ethernet device. No more packets should be -+ * received from this device. -+ * -+ * @param dev Device to bring down -+ * @return Zero on success -+ */ -+static int device_close(struct net_device *dev) -+{ -+ struct device_private *priv = netdev_priv(dev); -+ cvmx_mgmt_port_disable(priv->port); -+ return 0; -+} -+ -+ -+/** -+ * Get the low level ethernet statistics -+ * -+ * @param dev Device to get the statistics from -+ * @return Pointer to the statistics -+ */ -+static struct net_device_stats *device_get_stats(struct net_device *dev) -+{ -+ struct device_private *priv = netdev_priv(dev); -+ return &priv->stats; -+} -+ -+/** -+ * Set the multicast list. Currently unimplemented. -+ * -+ * @param dev Device to work on -+ */ -+static void ethernet_mgmt_port_set_multicast_list(struct net_device *dev) -+{ -+ struct device_private *priv = netdev_priv(dev); -+ int port = priv->port; -+ int num_ports; -+ if (OCTEON_IS_MODEL(OCTEON_CN52XX)) -+ num_ports = 2; -+ else -+ num_ports = 1; -+ if (port < num_ports) -+ cvmx_mgmt_port_set_multicast_list(port, dev->flags); -+} -+ -+/** -+ * Set the hardware MAC address for a management port device -+ * -+ * @param dev Device to change the MAC address for -+ * @param addr Address structure to change it too. MAC address is addr + 2. -+ * @return Zero on success -+ */ -+static int ethernet_mgmt_port_set_mac_address(struct net_device *dev, -+ void *addr) -+{ -+ struct device_private *priv = netdev_priv(dev); -+ union cvmx_agl_gmx_prtx_cfg agl_gmx_cfg; -+ int port = priv->port; -+ int num_ports; -+ -+ if (OCTEON_IS_MODEL(OCTEON_CN52XX)) -+ num_ports = 2; -+ else -+ num_ports = 1; -+ -+ memcpy(dev->dev_addr, addr + 2, 6); -+ -+ if (port < num_ports) { -+ int i; -+ uint8_t *ptr = addr; -+ uint64_t mac = 0; -+ for (i = 0; i < 6; i++) -+ mac = (mac<<8) | (uint64_t)(ptr[i+2]); -+ -+ agl_gmx_cfg.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); -+ cvmx_mgmt_port_set_mac(port, mac); -+ ethernet_mgmt_port_set_multicast_list(dev); -+ cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_cfg.u64); -+ } -+ return 0; -+} -+ -+/** -+ * Per network device initialization -+ * -+ * @param dev Device to initialize -+ * @return Zero on success -+ */ -+static int device_init(struct net_device *dev) -+{ -+ struct device_private *priv = netdev_priv(dev); -+ uint64_t mac = cvmx_mgmt_port_get_mac(priv->port); -+ -+ dev->hard_start_xmit = packet_transmit; -+ dev->get_stats = device_get_stats; -+ dev->open = device_open; -+ dev->stop = device_close; -+#ifdef CONFIG_NET_POLL_CONTROLLER -+ dev->poll_controller = device_poll_controller; -+#endif -+ dev->dev_addr[0] = (mac >> 40) & 0xff; -+ dev->dev_addr[1] = (mac >> 32) & 0xff; -+ dev->dev_addr[2] = (mac >> 24) & 0xff; -+ dev->dev_addr[3] = (mac >> 16) & 0xff; -+ dev->dev_addr[4] = (mac >> 8) & 0xff; -+ dev->dev_addr[5] = (mac >> 0) & 0xff; -+ return 0; -+} -+ -+ -+/** -+ * Module/ driver initialization. Creates the linux network -+ * devices. -+ * -+ * @return Zero on success -+ */ -+static int __init ethernet_mgmt_port_init(void) -+{ -+ struct net_device *dev; -+ struct device_private *priv; -+ union cvmx_mixx_irhwm mix_irhwm; -+ union cvmx_mixx_intena mix_intena; -+ int num_ports; -+ int port; -+ -+ if (!OCTEON_IS_MODEL(OCTEON_CN56XX) && !OCTEON_IS_MODEL(OCTEON_CN52XX)) -+ return 0; -+ -+ if (OCTEON_IS_MODEL(OCTEON_CN52XX)) -+ num_ports = 2; -+ else -+ num_ports = 1; -+ -+ printk("Octeon management port ethernet driver\n"); -+ -+ for (port = 0; port < num_ports; port++) { -+ if (cvmx_mgmt_port_initialize(port) != CVMX_MGMT_PORT_SUCCESS) { -+ pr_err("ERROR: cvmx_mgmt_port_initialize(%d) " -+ "failed\n", port); -+ return -1; -+ } -+ -+ /* Setup is complete, create the virtual ethernet devices */ -+ dev = alloc_etherdev(sizeof(struct device_private)); -+ if (dev == NULL) { -+ pr_err("ERROR: Failed to allocate ethernet device\n"); -+ return -1; -+ } -+ -+ dev->init = device_init; -+ strcpy(dev->name, "mgmt%d"); -+ -+ /* Initialize the device private structure. */ -+ priv = netdev_priv(dev); -+ memset(priv, 0, sizeof(struct device_private)); -+ priv->port = port; -+ -+ if (register_netdev(dev) < 0) { -+ pr_err("ERROR: Failed to register ethernet device\n"); -+ kfree(dev); -+ return -1; -+ } -+ -+ /* Clear any pending interrupts */ -+ cvmx_write_csr(CVMX_MIXX_ISR(priv->port), -+ cvmx_read_csr(CVMX_MIXX_ISR(priv->port))); -+ -+ /* Register an IRQ hander for to receive interrupts */ -+ dev->irq = -+ (priv->port == 0) ? OCTEON_IRQ_MII0 : OCTEON_IRQ_MII1; -+ if (request_irq(dev->irq, do_interrupt, IRQF_SHARED, dev->name, -+ dev)) -+ pr_err("ethernet-mgmt: Failed to assign " -+ "interrupt %d\n", dev->irq); -+ -+ /* Interrupt every single RX packet */ -+ mix_irhwm.u64 = 0; -+ mix_irhwm.s.irhwm = 0; -+ cvmx_write_csr(CVMX_MIXX_IRHWM(priv->port), mix_irhwm.u64); -+ -+ /* Enable receive interrupts */ -+ mix_intena.u64 = 0; -+ mix_intena.s.ithena = 1; -+ cvmx_write_csr(CVMX_MIXX_INTENA(priv->port), mix_intena.u64); -+ -+ global_dev[priv->port] = dev; -+ -+ dev->set_mac_address = ethernet_mgmt_port_set_mac_address; -+ dev->set_multicast_list = ethernet_mgmt_port_set_multicast_list; -+ } -+ return 0; -+} -+ -+ -+/** -+ * Module / driver shutdown -+ * -+ * @return Zero on success -+ */ -+static void __exit ethernet_mgmt_port_cleanup(void) -+{ -+ int port; -+ for (port = 0; port < 2; port++) { -+ if (global_dev[port]) { -+ struct device_private *priv = -+ netdev_priv(global_dev[port]); -+ /* Disable interrupt */ -+ cvmx_write_csr(CVMX_MIXX_IRHWM(priv->port), 0); -+ cvmx_write_csr(CVMX_MIXX_INTENA(priv->port), 0); -+ cvmx_mgmt_port_shutdown(priv->port); -+ -+ /* Free the interrupt handler */ -+ free_irq(global_dev[port]->irq, global_dev[port]); -+ -+ /* Free the ethernet devices */ -+ unregister_netdev(global_dev[port]); -+ kfree(global_dev[port]); -+ global_dev[port] = NULL; -+ } -+ } -+} -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Cavium Networks "); -+MODULE_DESCRIPTION("Cavium Networks Octeon management port ethernet driver."); -+module_init(ethernet_mgmt_port_init); -+module_exit(ethernet_mgmt_port_cleanup); -- cgit v1.2.3