From 42dd4ac5f0d25d070b888dae143e0987f46826c3 Mon Sep 17 00:00:00 2001 From: florian Date: Sat, 15 Nov 2008 11:21:42 +0000 Subject: Delete old brcm63xx files git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13210 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../brcm63xx/patches-2.6.25/001-bcm963xx.patch | 170 -------- .../patches-2.6.25/002-bcm963xx_serial.patch | 18 - .../patches-2.6.25/040-bcm963xx_flashmap.patch | 73 ---- .../050-bcm963xx_add_trailing_zero.patch | 24 -- .../060-bcm963xx_rewrite_irq_handling_code.patch | 452 --------------------- .../patches-2.6.25/070-bcm963xx_fix_uart_isr.patch | 31 -- .../080-bcm963xx_remove_unused_int_handler.patch | 87 ---- .../090-bcm963xx_remove_obsolete_timer_code.patch | 66 --- .../100-bcm963xx_add_new_timer_code.patch | 115 ------ .../110-bcm963xx_fix_cfe_detection.patch | 41 -- .../patches-2.6.25/500-bcm96345_fixes.patch | 116 ------ 11 files changed, 1193 deletions(-) delete mode 100644 target/linux/brcm63xx/patches-2.6.25/001-bcm963xx.patch delete mode 100644 target/linux/brcm63xx/patches-2.6.25/002-bcm963xx_serial.patch delete mode 100644 target/linux/brcm63xx/patches-2.6.25/040-bcm963xx_flashmap.patch delete mode 100644 target/linux/brcm63xx/patches-2.6.25/050-bcm963xx_add_trailing_zero.patch delete mode 100644 target/linux/brcm63xx/patches-2.6.25/060-bcm963xx_rewrite_irq_handling_code.patch delete mode 100644 target/linux/brcm63xx/patches-2.6.25/070-bcm963xx_fix_uart_isr.patch delete mode 100644 target/linux/brcm63xx/patches-2.6.25/080-bcm963xx_remove_unused_int_handler.patch delete mode 100644 target/linux/brcm63xx/patches-2.6.25/090-bcm963xx_remove_obsolete_timer_code.patch delete mode 100644 target/linux/brcm63xx/patches-2.6.25/100-bcm963xx_add_new_timer_code.patch delete mode 100644 target/linux/brcm63xx/patches-2.6.25/110-bcm963xx_fix_cfe_detection.patch delete mode 100644 target/linux/brcm63xx/patches-2.6.25/500-bcm96345_fixes.patch (limited to 'target/linux/brcm63xx/patches-2.6.25') diff --git a/target/linux/brcm63xx/patches-2.6.25/001-bcm963xx.patch b/target/linux/brcm63xx/patches-2.6.25/001-bcm963xx.patch deleted file mode 100644 index 909ff61a5..000000000 --- a/target/linux/brcm63xx/patches-2.6.25/001-bcm963xx.patch +++ /dev/null @@ -1,170 +0,0 @@ -From 2b2b8e163d28646cbbfde81c900fbb57d6572a11 Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Thu, 15 May 2008 11:00:43 +0200 -Subject: [PATCH] bcm963xx: board support - - -Signed-off-by: Axel Gembe ---- - arch/mips/Kconfig | 11 +++++++++++ - arch/mips/Makefile | 4 ++++ - arch/mips/kernel/cpu-probe.c | 16 ++++++++++++++++ - arch/mips/mm/c-r4k.c | 7 +++++++ - arch/mips/mm/tlbex.c | 4 ++++ - arch/mips/pci/Makefile | 1 + - include/asm-mips/bootinfo.h | 12 ++++++++++++ - include/asm-mips/cpu.h | 7 ++++++- - 8 files changed, 61 insertions(+), 1 deletions(-) - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -59,6 +59,17 @@ - help - Support for BCM47XX based boards - -+config BCM963XX -+ bool "Support for Broadcom BCM963xx SoC" -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_CPU_MIPS32_R1 -+ select HW_HAS_PCI -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ help -+ This is a fmaily of boards based on the Broadcom MIPS32 -+ - config MIPS_COBALT - bool "Cobalt Server" - select CEVT_R4K ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -560,6 +560,10 @@ - cflags-$(CONFIG_BCM47XX) += -Iinclude/asm-mips/mach-bcm47xx - load-$(CONFIG_BCM47XX) := 0xffffffff80001000 - -+core-$(CONFIG_BCM963XX) += arch/mips/bcm963xx/ -+cflags-$(CONFIG_BCM963XX) += -Iinclude/asm-mips/mach-bcm963xx -+load-$(CONFIG_BCM963XX) := 0xffffffff8001000 -+ - # - # SNI RM - # ---- a/arch/mips/kernel/cpu-probe.c -+++ b/arch/mips/kernel/cpu-probe.c -@@ -803,6 +803,21 @@ - case PRID_IMP_BCM4710: - c->cputype = CPU_BCM4710; - break; -+// case PRID_IMP_BCM6338: -+// c->cputype = CPU_BCM6338; -+// break; -+ case PRID_IMP_BCM6345: -+ c->cputype = CPU_BCM6345; -+ break; -+ case PRID_IMP_BCM6348: -+ c->cputype = CPU_BCM6348; -+ break; -+ case PRID_IMP_BCM6358: -+ c->cputype = CPU_BCM6358; -+ break; -+ case PRID_IMP_BCM3350: -+ c->cputype = CPU_BCM3350; -+ break; - default: - c->cputype = CPU_UNKNOWN; - break; -@@ -887,6 +902,11 @@ - case CPU_SR71000: name = "Sandcraft SR71000"; break; - case CPU_BCM3302: name = "Broadcom BCM3302"; break; - case CPU_BCM4710: name = "Broadcom BCM4710"; break; -+ case CPU_BCM6338: name = "Broadcom BCM6338"; break; -+ case CPU_BCM6345: name = "Broadcom BCM6345"; break; -+ case CPU_BCM6348: name = "Broadcom BCM6348"; break; -+ case CPU_BCM6358: name = "Broadcom BCM6358"; break; -+ case CPU_BCM3350: name = "Broadcom BCM3350"; break; - case CPU_PR4450: name = "Philips PR4450"; break; - case CPU_LOONGSON2: name = "ICT Loongson-2"; break; - default: ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -882,6 +882,13 @@ - if (!(config & MIPS_CONF_M)) - panic("Don't know how to probe P-caches on this cpu."); - -+ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348 || c->cputype == CPU_BCM6358 || c->cputype == CPU_BCM3350) -+ { -+ printk("bcm963xx: enabling icache and dcache...\n"); -+ /* Enable caches */ -+ write_c0_diag(read_c0_diag() | 0xC0000000); -+ } -+ - /* - * So we seem to be a MIPS32 or MIPS64 CPU - * So let's probe the I-cache ... ---- a/arch/mips/mm/tlbex.c -+++ b/arch/mips/mm/tlbex.c -@@ -315,6 +315,11 @@ - case CPU_25KF: - case CPU_BCM3302: - case CPU_BCM4710: -+// case CPU_BCM6338: -+ case CPU_BCM6345: -+ case CPU_BCM6348: -+ case CPU_BCM6358: -+ case CPU_BCM3350: - case CPU_LOONGSON2: - if (m4kc_tlbp_war()) - uasm_i_nop(p); ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -48,3 +48,4 @@ - obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o - obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o - obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o -+obj-$(CONFIG_BCM963XX) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o ---- a/include/asm-mips/bootinfo.h -+++ b/include/asm-mips/bootinfo.h -@@ -94,6 +94,19 @@ - #define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ - #define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ - -+#define MACH_WRPPMC 1 -+ -+/* -+ * Valid machtype for group Broadcom -+ */ -+#define MACH_GROUP_BRCM 23 /* Broadcom */ -+#define MACH_BCM47XX 1 /* Broadcom BCM47XX */ -+#define MACH_BCM96338 2 -+#define MACH_BCM96345 3 -+#define MACH_BCM96348 4 -+#define MACH_BCM96358 5 -+#define MACH_BCM3350 6 -+ - #define CL_SIZE COMMAND_LINE_SIZE - - extern char *system_type; ---- a/include/asm-mips/cpu.h -+++ b/include/asm-mips/cpu.h -@@ -111,6 +111,11 @@ - - #define PRID_IMP_BCM4710 0x4000 - #define PRID_IMP_BCM3302 0x9000 -+//#define PRID_IMP_BCM6338 0x9000 -+#define PRID_IMP_BCM6345 0x8000 -+#define PRID_IMP_BCM6348 0x9100 -+#define PRID_IMP_BCM6358 0xA000 -+#define PRID_IMP_BCM3350 0x28000 - - /* - * Definitions for 7:0 on legacy processors -@@ -196,7 +201,8 @@ - */ - CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_74K, CPU_AU1000, - CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500, CPU_AU1550, -- CPU_PR4450, CPU_BCM3302, CPU_BCM4710, -+ CPU_PR4450, CPU_BCM3302, CPU_BCM4710, CPU_BCM6338, CPU_BCM6345, CPU_BCM6348, -+ CPU_BCM6358, CPU_BCM3350, - - /* - * MIPS64 class processors diff --git a/target/linux/brcm63xx/patches-2.6.25/002-bcm963xx_serial.patch b/target/linux/brcm63xx/patches-2.6.25/002-bcm963xx_serial.patch deleted file mode 100644 index 7c46a79e7..000000000 --- a/target/linux/brcm63xx/patches-2.6.25/002-bcm963xx_serial.patch +++ /dev/null @@ -1,18 +0,0 @@ -From 53bc5316c1123689dddf2c78a4cdfd15834237e8 Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Mon, 12 May 2008 18:53:47 +0200 -Subject: [PATCH] bcm963xx: serial port support - - -Signed-off-by: Axel Gembe ---- - drivers/serial/Makefile | 1 + - 1 files changed, 1 insertions(+), 0 deletions(-) - ---- a/drivers/serial/Makefile -+++ b/drivers/serial/Makefile -@@ -67,3 +67,4 @@ - obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o - obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o - obj-$(CONFIG_SERIAL_QE) += ucc_uart.o -+obj-$(CONFIG_BCM963XX) += bcm63xx_cons.o diff --git a/target/linux/brcm63xx/patches-2.6.25/040-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-2.6.25/040-bcm963xx_flashmap.patch deleted file mode 100644 index e4e6ff5c5..000000000 --- a/target/linux/brcm63xx/patches-2.6.25/040-bcm963xx_flashmap.patch +++ /dev/null @@ -1,73 +0,0 @@ -From e734ace5baa04e0e8af1d4483475fbd6bd2b32a1 Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Mon, 12 May 2008 18:54:09 +0200 -Subject: [PATCH] bcm963xx: flashmap support - - -Signed-off-by: Axel Gembe ---- - drivers/mtd/maps/Kconfig | 7 +++++++ - drivers/mtd/maps/Makefile | 1 + - drivers/mtd/redboot.c | 13 ++++++++++--- - 3 files changed, 18 insertions(+), 3 deletions(-) - ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -262,6 +262,13 @@ - Flash memory access on 4G Systems MTX-1 Board. If you have one of - these boards and would like to use the flash chips on it, say 'Y'. - -+config MTD_BCM963XX -+ tristate "BCM963xx Flash device" -+ depends on MIPS && BCM963XX -+ help -+ Flash memory access on BCM963xx boards. Currently only works with -+ RedBoot and CFE. -+ - config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -68,3 +68,4 @@ - obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o - obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o - obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o -+obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -39,7 +39,7 @@ - return 1; - } - --static int parse_redboot_partitions(struct mtd_info *master, -+int parse_redboot_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long fis_origin) - { -@@ -161,6 +161,14 @@ - goto out; - } - -+ if (!fis_origin) { -+ for (i = 0; i < numslots; i++) { -+ if (!strncmp(buf[i].name, "RedBoot", 8)) { -+ fis_origin = (buf[i].flash_base & (master->size << 1) - 1); -+ } -+ } -+ } -+ - for (i = 0; i < numslots; i++) { - struct fis_list *new_fl, **prev; - -@@ -183,9 +191,8 @@ - new_fl->img = &buf[i]; - if (fis_origin) { - buf[i].flash_base -= fis_origin; -- } else { -- buf[i].flash_base &= master->size-1; - } -+ buf[i].flash_base &= (master->size << 1) - 1; - - /* I'm sure the JFFS2 code has done me permanent damage. - * I now think the following is _normal_ diff --git a/target/linux/brcm63xx/patches-2.6.25/050-bcm963xx_add_trailing_zero.patch b/target/linux/brcm63xx/patches-2.6.25/050-bcm963xx_add_trailing_zero.patch deleted file mode 100644 index d13ca9266..000000000 --- a/target/linux/brcm63xx/patches-2.6.25/050-bcm963xx_add_trailing_zero.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 40dd38388c3d1c87efe254cee533fc5db5ffc4ed Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Wed, 14 May 2008 12:43:34 +0200 -Subject: [PATCH] bcm963xx: add missing trailing zero to load address - -The load address for BCM963xx is 0x80010000, not 0xf8001000 as in the current -sources. I think this is just a typo, so this patch fixes it (tested on 96345). - -Signed-off-by: Axel Gembe ---- - arch/mips/Makefile | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -562,7 +562,7 @@ - - core-$(CONFIG_BCM963XX) += arch/mips/bcm963xx/ - cflags-$(CONFIG_BCM963XX) += -Iinclude/asm-mips/mach-bcm963xx --load-$(CONFIG_BCM963XX) := 0xffffffff8001000 -+load-$(CONFIG_BCM963XX) := 0xffffffff80010000 - - # - # SNI RM diff --git a/target/linux/brcm63xx/patches-2.6.25/060-bcm963xx_rewrite_irq_handling_code.patch b/target/linux/brcm63xx/patches-2.6.25/060-bcm963xx_rewrite_irq_handling_code.patch deleted file mode 100644 index 349010486..000000000 --- a/target/linux/brcm63xx/patches-2.6.25/060-bcm963xx_rewrite_irq_handling_code.patch +++ /dev/null @@ -1,452 +0,0 @@ -From 9a70f2dcb24a5aab29386373c86ba035acba4891 Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Sun, 18 May 2008 12:07:21 +0200 -Subject: [PATCH] bcm963xx: rewrite irq handling code - -This patch adds interrupt handling as on AR7. The old code was very messy and -didn't work too well. - -Signed-off-by: Axel Gembe ---- - arch/mips/bcm963xx/irq.c | 308 ++++++++++------------------- - drivers/serial/bcm63xx_cons.c | 13 +- - include/asm-mips/mach-bcm963xx/bcm_intr.h | 18 +-- - 3 files changed, 119 insertions(+), 220 deletions(-) - ---- a/arch/mips/bcm963xx/irq.c -+++ b/arch/mips/bcm963xx/irq.c -@@ -1,259 +1,159 @@ - /* --<:copyright-gpl -- Copyright 2002 Broadcom Corp. All Rights Reserved. -- -- This program is free software; you can distribute it and/or modify it -- under the terms of the GNU General Public License (Version 2) as -- published by the Free Software Foundation. -- -- This program is distributed in the hope it will be useful, but WITHOUT -- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- for more details. -- -- You should have received a copy of the GNU General Public License along -- with this program; if not, write to the Free Software Foundation, Inc., -- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. --:> --*/ --/* -- * Interrupt control functions for Broadcom 963xx MIPS boards -+ * Copyright (C) 2006,2007 Felix Fietkau -+ * Copyright (C) 2006,2007 Eugene Konev -+ * Copyright (C) 2008 Axel Gembe -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - --#include -- --#include --#include --#include --#include - #include --#include --#include --#include -+#include - --#include -+#include - #include --#include --#include -+ - #include <6348_map_part.h> - #include <6348_intr.h> - #include - #include - --static void irq_dispatch_int(void) --{ -- unsigned int pendingIrqs; -- static unsigned int irqBit; -- static unsigned int isrNumber = 31; -- -- pendingIrqs = PERF->IrqStatus & PERF->IrqMask; -- if (!pendingIrqs) { -- return; -- } -+static int bcm963xx_irq_base; - -- while (1) { -- irqBit <<= 1; -- isrNumber++; -- if (isrNumber == 32) { -- isrNumber = 0; -- irqBit = 0x1; -- } -- if (pendingIrqs & irqBit) { -- PERF->IrqMask &= ~irqBit; // mask -- do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET); -- break; -- } -- } -+void bcm963xx_unmask_irq(unsigned int irq) -+{ -+ PERF->IrqMask |= (1 << (irq - bcm963xx_irq_base)); - } - --static void irq_dispatch_ext(uint32 irq) -+void bcm963xx_mask_irq(unsigned int irq) - { -- if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) { -- printk("**** Ext IRQ mask. Should not dispatch ****\n"); -- } -- /* disable and clear interrupt in the controller */ -- PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); -- PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); -- do_IRQ(irq); -+ PERF->IrqMask &= ~(1 << (irq - bcm963xx_irq_base)); - } - -- --//extern void brcm_timer_interrupt(struct pt_regs *regs); -- --asmlinkage void plat_irq_dispatch(void) -+void bcm963xx_ack_irq(unsigned int irq) - { -- unsigned long cause; -- -- cause = read_c0_status() & read_c0_cause() & ST0_IM; -- if (cause & CAUSEF_IP7) -- do_IRQ(7); -- else if (cause & CAUSEF_IP2) -- irq_dispatch_int(); -- else if (cause & CAUSEF_IP3) -- irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0); -- else if (cause & CAUSEF_IP4) -- irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1); -- else if (cause & CAUSEF_IP5) -- irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2); -- else if (cause & CAUSEF_IP6) { -- irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3); -- local_irq_disable(); -- } -+ PERF->IrqStatus &= ~(1 << (irq - bcm963xx_irq_base)); - } - -- --void enable_brcm_irq(unsigned int irq) -+void bcm963xx_unmask_ext_irq(unsigned int irq) - { -- unsigned long flags; -- -- local_irq_save(flags); -- if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { -- PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); -- } -- else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { -- /* enable and clear interrupt in the controller */ -- PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); - PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); -- } -- local_irq_restore(flags); - } - --void disable_brcm_irq(unsigned int irq) -+void bcm963xx_mask_ext_irq(unsigned int irq) - { -- unsigned long flags; -- -- local_irq_save(flags); -- if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { -- PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); -- } -- else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { -- /* disable interrupt in the controller */ - PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); -- } -- local_irq_restore(flags); - } - --void ack_brcm_irq(unsigned int irq) -+void bcm963xx_ack_ext_irq(unsigned int irq) - { -- /* Already done in brcm_irq_dispatch */ -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); - } - --unsigned int startup_brcm_irq(unsigned int irq) -+static void bcm963xx_dispatch_ext_irq(unsigned int irq) - { -- enable_brcm_irq(irq); -- -- return 0; /* never anything pending */ -+ bcm963xx_ack_ext_irq(irq); -+ bcm963xx_mask_ext_irq(irq); -+ do_IRQ(irq); - } - --unsigned int startup_brcm_none(unsigned int irq) -+static void bcm963xx_cascade(void) - { -- return 0; --} -+ uint32_t pending, bit, irq; - --void end_brcm_irq(unsigned int irq) --{ -- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) -- enable_brcm_irq(irq); --} -+ if (!(pending = PERF->IrqStatus & PERF->IrqMask)) -+ return; - --void end_brcm_none(unsigned int irq) --{ --} -+ for (irq = 0, bit = 1; irq < 32; irq++, bit <<= 1) { -+ if (pending & bit) { -+ bcm963xx_ack_irq(irq + bcm963xx_irq_base); -+ bcm963xx_mask_irq(irq + bcm963xx_irq_base); -+ do_IRQ(irq + bcm963xx_irq_base); -+ return; -+ } -+ } -+ -+ spurious_interrupt(); -+} -+ -+static struct irq_chip bcm963xx_irq_type = { -+ .name = "bcm963xx", -+ .unmask = bcm963xx_unmask_irq, -+ .mask = bcm963xx_mask_irq, -+ .ack = bcm963xx_ack_irq -+}; - --static struct hw_interrupt_type brcm_irq_type = { -- .typename = "MIPS", -- .startup = startup_brcm_irq, -- .shutdown = disable_brcm_irq, -- .enable = enable_brcm_irq, -- .disable = disable_brcm_irq, -- .ack = ack_brcm_irq, -- .end = end_brcm_irq, -- .set_affinity = NULL -+static struct irq_chip bcm963xx_ext_irq_type = { -+ .name = "bcm963xx_ext", -+ .unmask = bcm963xx_unmask_ext_irq, -+ .mask = bcm963xx_mask_ext_irq, -+ .ack = bcm963xx_ack_ext_irq, - }; - --static struct hw_interrupt_type brcm_irq_no_end_type = { -- .typename = "MIPS", -- .startup = startup_brcm_none, -- .shutdown = disable_brcm_irq, -- .enable = enable_brcm_irq, -- .disable = disable_brcm_irq, -- .ack = ack_brcm_irq, -- .end = end_brcm_none, -- .set_affinity = NULL -+static struct irqaction bcm963xx_cascade_action = { -+ .handler = no_action, -+ .name = "BCM963xx cascade interrupt" - }; - --void __init arch_init_irq(void) -+static void __init bcm963xx_irq_init(int base) - { - int i; - -- clear_c0_status(ST0_BEV); -- change_c0_status(ST0_IM, (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)); -+ bcm963xx_irq_base = base; - -- for (i = 0; i < NR_IRQS; i++) { -- irq_desc[i].status = IRQ_DISABLED; -- irq_desc[i].action = 0; -- irq_desc[i].depth = 1; -- irq_desc[i].chip = &brcm_irq_type; -- } -+ /* External IRQs */ -+ set_irq_chip_and_handler(INTERRUPT_ID_EXTERNAL_0, &bcm963xx_ext_irq_type, -+ handle_level_irq); -+ set_irq_chip_and_handler(INTERRUPT_ID_EXTERNAL_1, &bcm963xx_ext_irq_type, -+ handle_level_irq); -+ set_irq_chip_and_handler(INTERRUPT_ID_EXTERNAL_2, &bcm963xx_ext_irq_type, -+ handle_level_irq); -+ set_irq_chip_and_handler(INTERRUPT_ID_EXTERNAL_3, &bcm963xx_ext_irq_type, -+ handle_level_irq); -+ -+ for (i = 0; i < 32; i++) { -+ set_irq_chip_and_handler(base + i, &bcm963xx_irq_type, -+ handle_level_irq); -+ } -+ -+ setup_irq(2, &bcm963xx_cascade_action); -+ setup_irq(bcm963xx_irq_base, &bcm963xx_cascade_action); -+ set_c0_status(IE_IRQ0); - } - --int request_external_irq(unsigned int irq, -- FN_HANDLER handler, -- unsigned long irqflags, -- const char * devname, -- void *dev_id) -+asmlinkage void plat_irq_dispatch(void) - { -- unsigned long flags; -- -- local_irq_save(flags); -+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - -- PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear -- PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask -- PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive -- PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered -- PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level -- -- local_irq_restore(flags); -- -- return( request_irq(irq, handler, irqflags, devname, dev_id) ); -+ if (pending & STATUSF_IP7) /* cpu timer */ -+ do_IRQ(7); -+ else if (pending & STATUSF_IP2) /* internal interrupt cascade */ -+ bcm963xx_cascade(); -+ else if (pending & STATUSF_IP3) -+ bcm963xx_dispatch_ext_irq(INTERRUPT_ID_EXTERNAL_0); -+ else if (pending & STATUSF_IP4) -+ bcm963xx_dispatch_ext_irq(INTERRUPT_ID_EXTERNAL_1); -+ else if (pending & STATUSF_IP5) -+ bcm963xx_dispatch_ext_irq(INTERRUPT_ID_EXTERNAL_2); -+ else if (pending & STATUSF_IP6) -+ bcm963xx_dispatch_ext_irq(INTERRUPT_ID_EXTERNAL_3); -+ else -+ spurious_interrupt(); - } - --/* VxWorks compatibility function(s). */ -- --unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param, -- unsigned int interruptId) -+void __init arch_init_irq(void) - { -- int nRet = -1; -- char *devname; -- -- devname = kmalloc(16, GFP_KERNEL); -- if (devname) -- sprintf( devname, "brcm_%d", interruptId ); -- -- /* Set the IRQ description to not automatically enable the interrupt at -- * the end of an ISR. The driver that handles the interrupt must -- * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior -- * is consistent with interrupt handling on VxWorks. -- */ -- irq_desc[interruptId].chip = &brcm_irq_no_end_type; -- -- if( interruptId >= INTERNAL_ISR_TABLE_OFFSET ) -- { -- printk("BcmHalMapInterrupt : internal IRQ\n"); -- nRet = request_irq( interruptId, pfunc, IRQF_DISABLED, devname, (void *) param ); -- } -- else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3) -- { -- printk("BcmHalMapInterrupt : external IRQ\n"); -- nRet = request_external_irq( interruptId, pfunc, IRQF_DISABLED, devname, (void *) param ); -- } -- -- return( nRet ); -+ mips_cpu_irq_init(); -+ bcm963xx_irq_init(INTERNAL_ISR_TABLE_OFFSET); - } -- -- --EXPORT_SYMBOL(enable_brcm_irq); --EXPORT_SYMBOL(disable_brcm_irq); --EXPORT_SYMBOL(request_external_irq); --EXPORT_SYMBOL(BcmHalMapInterrupt); -- ---- a/drivers/serial/bcm63xx_cons.c -+++ b/drivers/serial/bcm63xx_cons.c -@@ -267,7 +267,7 @@ - } - - // Clear the interrupt -- enable_brcm_irq(INTERRUPT_ID_UART); -+// bcm963xx_unmask_irq(INTERRUPT_ID_UART); - #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) - return IRQ_HANDLED; - #endif -@@ -880,7 +880,7 @@ - info->count++; - tty->driver_data = info; - info->tty = tty; -- enable_brcm_irq(INTERRUPT_ID_UART); -+ bcm963xx_unmask_irq(INTERRUPT_ID_UART); - - // Start up serial port - retval = startup(info); -@@ -927,7 +927,7 @@ - -------------------------------------------------------------------------- */ - static int __init bcm63xx_serialinit(void) - { -- int i, flags; -+ int i, flags, res; - struct bcm_serial *info; - - // Print the driver version information -@@ -981,7 +981,12 @@ - */ - if (!info->port) - return 0; -- BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART); -+ -+ res = request_irq(INTERRUPT_ID_UART, bcm_interrupt, 0, "bcm-uart", NULL); -+ if (res) { -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+ return res; -+ } - } - - /* order matters here... the trick is that flags ---- a/include/asm-mips/mach-bcm963xx/bcm_intr.h -+++ b/include/asm-mips/mach-bcm963xx/bcm_intr.h -@@ -39,18 +39,12 @@ - typedef int (*FN_HANDLER) (int, void *); - - /* prototypes */ --extern void enable_brcm_irq(unsigned int irq); --extern void disable_brcm_irq(unsigned int irq); --extern int request_external_irq(unsigned int irq, -- FN_HANDLER handler, unsigned long irqflags, -- const char * devname, void *dev_id); --extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param, -- unsigned int interruptId); --extern void dump_intr_regs(void); -- --/* compatibility definitions */ --#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq ) --#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq ) -+extern void bcm963xx_unmask_irq(unsigned int irq); -+extern void bcm963xx_mask_irq(unsigned int irq); -+extern void bcm963xx_ack_irq(unsigned int irq); -+extern void bcm963xx_unmask_ext_irq(unsigned int irq); -+extern void bcm963xx_mask_ext_irq(unsigned int irq); -+extern void bcm963xx_ack_ext_irq(unsigned int irq); - - #ifdef __cplusplus - } diff --git a/target/linux/brcm63xx/patches-2.6.25/070-bcm963xx_fix_uart_isr.patch b/target/linux/brcm63xx/patches-2.6.25/070-bcm963xx_fix_uart_isr.patch deleted file mode 100644 index a90bde3f8..000000000 --- a/target/linux/brcm63xx/patches-2.6.25/070-bcm963xx_fix_uart_isr.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 7bc3950017d2c54883591367723b7fd84cc65d6f Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Sun, 18 May 2008 12:09:14 +0200 -Subject: [PATCH] bcm963xx: fix uart isr - -The ISR ended up in an endless loop because the TX ISR never got used or masked. -This patch basically makes the TX ISR mask the the TX interrupt when it -encounters it, because it doesn't even use the TX interrupt. - -Signed-off-by: Axel Gembe ---- - drivers/serial/bcm63xx_cons.c | 6 ++++++ - 1 files changed, 6 insertions(+), 0 deletions(-) - ---- a/drivers/serial/bcm63xx_cons.c -+++ b/drivers/serial/bcm63xx_cons.c -@@ -258,8 +258,14 @@ - while (intStat) { - if (intStat & RXINT) - receive_chars(info); -+ -+#if 0 /* This code is total bullshit, TXINT doesn't get masked anywhere, so this will give an endless loop */ -+ - else if (intStat & TXINT) - info->port->intStatus = TXINT; -+ -+#endif /* 0 */ -+ - else /* don't know what it was, so let's mask it */ - info->port->intMask &= ~intStat; - diff --git a/target/linux/brcm63xx/patches-2.6.25/080-bcm963xx_remove_unused_int_handler.patch b/target/linux/brcm63xx/patches-2.6.25/080-bcm963xx_remove_unused_int_handler.patch deleted file mode 100644 index 0abfd9885..000000000 --- a/target/linux/brcm63xx/patches-2.6.25/080-bcm963xx_remove_unused_int_handler.patch +++ /dev/null @@ -1,87 +0,0 @@ -From e3abd028e7631ee952fe73d8f9ee97bc615526a8 Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Sat, 17 May 2008 16:07:46 +0200 -Subject: [PATCH] bcm963xx: remove unused int-handler.S - -The code is not used anymore. - -Signed-off-by: Axel Gembe ---- - arch/mips/bcm963xx/Makefile | 2 +- - arch/mips/bcm963xx/int-handler.S | 59 -------------------------------------- - 2 files changed, 1 insertions(+), 60 deletions(-) - delete mode 100644 arch/mips/bcm963xx/int-handler.S - ---- a/arch/mips/bcm963xx/Makefile -+++ b/arch/mips/bcm963xx/Makefile -@@ -3,7 +3,7 @@ - # - # Copyright (C) 2004 Broadcom Corporation - # --obj-y := irq.o prom.o setup.o time.o ser_init.o int-handler.o info.o wdt.o -+obj-y := irq.o prom.o setup.o time.o ser_init.o info.o wdt.o - - SRCBASE := $(TOPDIR) - EXTRA_CFLAGS += -I$(SRCBASE)/include ---- a/arch/mips/bcm963xx/int-handler.S -+++ /dev/null -@@ -1,59 +0,0 @@ --/* --<:copyright-gpl -- Copyright 2002 Broadcom Corp. All Rights Reserved. -- -- This program is free software; you can distribute it and/or modify it -- under the terms of the GNU General Public License (Version 2) as -- published by the Free Software Foundation. -- -- This program is distributed in the hope it will be useful, but WITHOUT -- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- for more details. -- -- You should have received a copy of the GNU General Public License along -- with this program; if not, write to the Free Software Foundation, Inc., -- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. --:> --*/ --/* -- * Generic interrupt handler for Broadcom MIPS boards -- */ -- --#include -- --#include --#include --#include --#include -- --/* -- * MIPS IRQ Source -- * -------- ------ -- * 0 Software (ignored) -- * 1 Software (ignored) -- * 2 Combined hardware interrupt (hw0) -- * 3 Hardware -- * 4 Hardware -- * 5 Hardware -- * 6 Hardware -- * 7 R4k timer -- */ -- -- .text -- .set noreorder -- .set noat -- .align 5 -- NESTED(brcmIRQ, PT_SIZE, sp) -- SAVE_ALL -- CLI -- .set noreorder -- .set at -- -- jal plat_irq_dispatch -- move a0, sp -- -- j ret_from_irq -- nop -- -- END(brcmIRQ) diff --git a/target/linux/brcm63xx/patches-2.6.25/090-bcm963xx_remove_obsolete_timer_code.patch b/target/linux/brcm63xx/patches-2.6.25/090-bcm963xx_remove_obsolete_timer_code.patch deleted file mode 100644 index 72ccfea7f..000000000 --- a/target/linux/brcm63xx/patches-2.6.25/090-bcm963xx_remove_obsolete_timer_code.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 42ecc15386869684cf29881a3a6941bafaa3bf69 Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Wed, 14 May 2008 00:25:28 +0200 -Subject: [PATCH] bcm963xx: remove obsolete timer code - -This removes some code that has been deprecated in kernels >= 2.6.24. - -Signed-off-by: Axel Gembe ---- - arch/mips/bcm963xx/setup.c | 2 -- - arch/mips/bcm963xx/time.c | 29 ----------------------------- - 2 files changed, 0 insertions(+), 31 deletions(-) - ---- a/arch/mips/bcm963xx/setup.c -+++ b/arch/mips/bcm963xx/setup.c -@@ -465,8 +465,6 @@ - _machine_halt = brcm_machine_halt; - pm_power_off = brcm_machine_halt; - -- //board_time_init = brcm_time_init; -- - /* mpi initialization */ - mpi_init(); - } ---- a/arch/mips/bcm963xx/time.c -+++ b/arch/mips/bcm963xx/time.c -@@ -71,26 +71,6 @@ - return (mips_hpt_frequency / HZ); - } - -- --/* -- * There are a lot of conceptually broken versions of the MIPS timer interrupt -- * handler floating around. This one is rather different, but the algorithm -- * is provably more robust. -- */ --#if 0 --irqreturn_t brcm_timer_interrupt(struct pt_regs *regs) --{ -- int irq = MIPS_TIMER_INT; -- -- irq_enter(); -- kstat_this_cpu.irqs[irq]++; -- -- timer_interrupt(irq, regs); -- irq_exit(); -- return IRQ_HANDLED; --} --#endif -- - void __init plat_time_init(void) - { - unsigned int est_freq, flags; -@@ -107,12 +87,3 @@ - (est_freq % 1000000) * 100 / 1000000); - local_irq_restore(flags); - } -- --#if 0 --void __init plat_timer_setup(struct irqaction *irq) --{ -- r4k_cur = (read_c0_count() + r4k_offset); -- write_c0_compare(r4k_cur); -- set_c0_status(IE_IRQ5); --} --#endif diff --git a/target/linux/brcm63xx/patches-2.6.25/100-bcm963xx_add_new_timer_code.patch b/target/linux/brcm63xx/patches-2.6.25/100-bcm963xx_add_new_timer_code.patch deleted file mode 100644 index 9d08ab087..000000000 --- a/target/linux/brcm63xx/patches-2.6.25/100-bcm963xx_add_new_timer_code.patch +++ /dev/null @@ -1,115 +0,0 @@ -From 7d6656dc127b54e53e507e8f264bb7e14e620cad Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Sat, 17 May 2008 15:02:39 +0200 -Subject: [PATCH] bcm963xx: add new timer code - -This basically selects the new generic MIPS timer code for BCM963xx and -simplifies the timer setup code. - -Signed-off-by: Axel Gembe ---- - arch/mips/Kconfig | 2 + - arch/mips/bcm963xx/time.c | 64 ++++++++++++++++++++------------------------ - 2 files changed, 31 insertions(+), 35 deletions(-) - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -67,6 +67,8 @@ - select HW_HAS_PCI - select DMA_NONCOHERENT - select IRQ_CPU -+ select CEVT_R4K -+ select CSRC_R4K - help - This is a fmaily of boards based on the Broadcom MIPS32 - ---- a/arch/mips/bcm963xx/time.c -+++ b/arch/mips/bcm963xx/time.c -@@ -1,6 +1,7 @@ - /* - <:copyright-gpl - Copyright 2004 Broadcom Corp. All Rights Reserved. -+ Copyright (C) 2008 Axel Gembe - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as -@@ -40,50 +41,43 @@ - #include - #include - --static unsigned long r4k_offset; /* Amount to increment compare reg each time */ --static unsigned long r4k_cur; /* What counter should be at next timer irq */ -- --/* ********************************************************************* -- * calculateCpuSpeed() -- * Calculate the BCM6348 CPU speed by reading the PLL strap register -- * and applying the following formula: -- * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) -- * Input parameters: -- * none -- * Return value: -- * none -- ********************************************************************* */ -- -+/* -+ * calculateCpuSpeed() -+ * -+ * Calculate the BCM6348 CPU speed by reading the PLL strap register and applying -+ * the following formula: -+ * -+ * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) -+ */ - static inline unsigned long __init calculateCpuSpeed(void) - { -- u32 pllStrap = PERF->PllStrap; -- int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT; -- int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT; -- int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT; -+ u32 pllStrap; -+ int n1, n2, m1cpu; -+ -+ pllStrap = PERF->PllStrap; -+ n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT; -+ n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT; -+ m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT; - - return (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000; - } - - --static inline unsigned long __init cal_r4koff(void) --{ -- mips_hpt_frequency = calculateCpuSpeed() / 2; -- return (mips_hpt_frequency / HZ); --} -- - void __init plat_time_init(void) - { -- unsigned int est_freq, flags; -- local_irq_save(flags); -+ unsigned long cpu_clock; -+ -+ cpu_clock = calculateCpuSpeed(); -+ -+ printk("CPU frequency %lu.%02lu MHz\n", cpu_clock / 1000000, -+ (cpu_clock % 1000000) * 100 / 1000000); -+ -+ mips_hpt_frequency = cpu_clock / 2; - -- printk("calculating r4koff... "); -- r4k_offset = cal_r4koff(); -- printk("%08lx(%d)\n", r4k_offset, (int)r4k_offset); -- -- est_freq = 2 * r4k_offset * HZ; -- est_freq += 5000; /* round */ -- est_freq -= est_freq % 10000; -- printk("CPU frequency %d.%02d MHz\n", est_freq / 1000000, -- (est_freq % 1000000) * 100 / 1000000); -- local_irq_restore(flags); -+ /* -+ * Use deterministic values for initial counter interrupt -+ * so that calibrate delay avoids encountering a counter wrap. -+ */ -+ write_c0_count(0); -+ write_c0_compare(0xffff); - } diff --git a/target/linux/brcm63xx/patches-2.6.25/110-bcm963xx_fix_cfe_detection.patch b/target/linux/brcm63xx/patches-2.6.25/110-bcm963xx_fix_cfe_detection.patch deleted file mode 100644 index 3cf460266..000000000 --- a/target/linux/brcm63xx/patches-2.6.25/110-bcm963xx_fix_cfe_detection.patch +++ /dev/null @@ -1,41 +0,0 @@ -From f1a605c36cf1659f5f486ae4135de1e285fdf86c Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Sat, 17 May 2008 16:17:22 +0200 -Subject: [PATCH] bcm963xx: fix cfe detection - -The CFE detection failed to account for zero termination. - -Signed-off-by: Axel Gembe ---- - drivers/mtd/maps/bcm963xx-flash.c | 11 ++++++----- - 1 files changed, 6 insertions(+), 5 deletions(-) - ---- a/drivers/mtd/maps/bcm963xx-flash.c -+++ b/drivers/mtd/maps/bcm963xx-flash.c -@@ -1,8 +1,7 @@ - /* -- * $Id$ - * Copyright (C) 2006 Florian Fainelli -- * Mike Albon -- * Copyright (C) $Date$ $Author$ -+ * Mike Albon -+ * Copyright (C) 2008 Axel Gembe - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by -@@ -184,11 +183,13 @@ - static int bcm963xx_detect_cfe(struct mtd_info *master) - { - int idoffset = 0x4e0; -- static char idstring[8] = "CFE1CFE1"; -- char buf[8]; -+ static char idstring[9] = "CFE1CFE1"; -+ char buf[9]; - int ret; - size_t retlen; - -+ memset(buf, 0, sizeof(buf)); -+ - ret = master->read(master, idoffset, 8, &retlen, (void *)buf); - printk("bcm963xx: Read Signature value of %s\n", buf); - return strcmp(idstring,buf); diff --git a/target/linux/brcm63xx/patches-2.6.25/500-bcm96345_fixes.patch b/target/linux/brcm63xx/patches-2.6.25/500-bcm96345_fixes.patch deleted file mode 100644 index dd55cd163..000000000 --- a/target/linux/brcm63xx/patches-2.6.25/500-bcm96345_fixes.patch +++ /dev/null @@ -1,116 +0,0 @@ -From d1259cf42ce84246c695f06b44d58e3aca0a480b Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Sat, 17 May 2008 14:59:35 +0200 -Subject: [PATCH] bcm96345: correct some 6345 specific stuff - -This fixes some problems with the 6345 support and adds a macro for CPU -identification that is easier on the eyes. The first thing it does is to not -initialize MPI on the 6345 as it does not have PCI. The second thing it does is -to use a static value for the CPU frequency of the 6345 chip to provide an -accurate timer. - -Signed-off-by: Axel Gembe ---- - arch/mips/bcm963xx/setup.c | 8 ++++++-- - arch/mips/bcm963xx/time.c | 5 ++++- - arch/mips/pci/pci-bcm96348.c | 21 +++++++++++++-------- - include/asm-mips/mach-bcm963xx/board.h | 2 ++ - 4 files changed, 25 insertions(+), 11 deletions(-) - ---- a/arch/mips/bcm963xx/setup.c -+++ b/arch/mips/bcm963xx/setup.c -@@ -43,6 +43,7 @@ - #include - #include - #include -+#include - - extern void brcm_time_init(void); - extern int boot_loader_type; -@@ -465,6 +466,9 @@ - _machine_halt = brcm_machine_halt; - pm_power_off = brcm_machine_halt; - -- /* mpi initialization */ -- mpi_init(); -+ /* BCM96345 has no MPI */ -+ if (!ISBCM(0x6345)) { -+ /* mpi initialization */ -+ mpi_init(); -+ } - } ---- a/arch/mips/bcm963xx/time.c -+++ b/arch/mips/bcm963xx/time.c -@@ -40,6 +40,8 @@ - #include <6348_intr.h> - #include - #include -+#include -+ - - /* - * calculateCpuSpeed() -@@ -63,11 +65,12 @@ - } - - -+#define BCM96345_CPU_CLOCK 140000000 - void __init plat_time_init(void) - { - unsigned long cpu_clock; - -- cpu_clock = calculateCpuSpeed(); -+ cpu_clock = ISBCM(0x6345) ? BCM96345_CPU_CLOCK : calculateCpuSpeed(); - - printk("CPU frequency %lu.%02lu MHz\n", cpu_clock / 1000000, - (cpu_clock % 1000000) * 100 / 1000000); ---- a/arch/mips/pci/pci-bcm96348.c -+++ b/arch/mips/pci/pci-bcm96348.c -@@ -21,6 +21,8 @@ - #include - #include - -+#include -+#include - #include - - static struct resource bcm_pci_io_resource = { -@@ -47,16 +49,19 @@ - - static __init int bcm96348_pci_init(void) - { -- /* Avoid ISA compat ranges. */ -- PCIBIOS_MIN_IO = 0x00000000; -- PCIBIOS_MIN_MEM = 0x00000000; -- -- /* Set I/O resource limits. */ -- ioport_resource.end = 0x1fffffff; -- iomem_resource.end = 0xffffffff; -+ if (!ISBCM(0x6345)) { -+ /* Avoid ISA compat ranges. */ -+ PCIBIOS_MIN_IO = 0x00000000; -+ PCIBIOS_MIN_MEM = 0x00000000; -+ -+ /* Set I/O resource limits. */ -+ ioport_resource.end = 0x1fffffff; -+ iomem_resource.end = 0xffffffff; - -- register_pci_controller(&bcm96348_controller); -- return 0; -+ register_pci_controller(&bcm96348_controller); -+ } -+ -+ return 0; - } - - arch_initcall(bcm96348_pci_init); ---- a/include/asm-mips/mach-bcm963xx/board.h -+++ b/include/asm-mips/mach-bcm963xx/board.h -@@ -369,5 +369,7 @@ - - extern int boot_loader_type; - -+#define ISBCM(x) (((PERF->RevID & 0xFFFF0000) >> 16) == x) -+ - #endif /* _BOARD_H */ - -- cgit v1.2.3