From aedeeb1874e872189927c3c73cc039a2eb250586 Mon Sep 17 00:00:00 2001 From: florian Date: Wed, 26 Nov 2008 18:41:01 +0000 Subject: Flatten brcm63xx patches, should make our life easier to patch files now ;) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13368 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../linux/brcm63xx/files/arch/mips/bcm63xx/Kconfig | 21 + .../brcm63xx/files/arch/mips/bcm63xx/Makefile | 9 + .../files/arch/mips/bcm63xx/boards/Kconfig | 15 + .../files/arch/mips/bcm63xx/boards/Makefile | 2 + .../arch/mips/bcm63xx/boards/board_bcm963xx.c | 383 +++++++++ .../files/arch/mips/bcm63xx/boards/board_livebox.c | 172 ++++ .../linux/brcm63xx/files/arch/mips/bcm63xx/clk.c | 220 ++++++ .../linux/brcm63xx/files/arch/mips/bcm63xx/cpu.c | 245 ++++++ target/linux/brcm63xx/files/arch/mips/bcm63xx/cs.c | 144 ++++ .../brcm63xx/files/arch/mips/bcm63xx/dev-enet.c | 158 ++++ .../brcm63xx/files/arch/mips/bcm63xx/dev-pcmcia.c | 135 ++++ .../brcm63xx/files/arch/mips/bcm63xx/dev-uart.c | 41 + .../files/arch/mips/bcm63xx/dev-usb-ehci.c | 50 ++ .../files/arch/mips/bcm63xx/dev-usb-ohci.c | 50 ++ .../files/arch/mips/bcm63xx/early_printk.c | 30 + .../linux/brcm63xx/files/arch/mips/bcm63xx/gpio.c | 98 +++ .../linux/brcm63xx/files/arch/mips/bcm63xx/irq.c | 253 ++++++ .../linux/brcm63xx/files/arch/mips/bcm63xx/prom.c | 47 ++ .../linux/brcm63xx/files/arch/mips/bcm63xx/setup.c | 122 +++ .../linux/brcm63xx/files/arch/mips/bcm63xx/timer.c | 205 +++++ .../files/arch/mips/configs/bcm63xx_defconfig | 868 +++++++++++++++++++++ .../brcm63xx/files/arch/mips/pci/fixup-bcm63xx.c | 21 + .../brcm63xx/files/arch/mips/pci/ops-bcm63xx.c | 179 +++++ .../brcm63xx/files/arch/mips/pci/pci-bcm63xx.c | 178 +++++ .../brcm63xx/files/arch/mips/pci/pci-bcm63xx.h | 27 + 25 files changed, 3673 insertions(+) create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/Kconfig create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/Makefile create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/Kconfig create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/Makefile create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_livebox.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/clk.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/cpu.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/cs.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-enet.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-pcmcia.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-uart.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-usb-ehci.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-usb-ohci.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/early_printk.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/gpio.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/irq.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/prom.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/setup.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm63xx/timer.c create mode 100644 target/linux/brcm63xx/files/arch/mips/configs/bcm63xx_defconfig create mode 100644 target/linux/brcm63xx/files/arch/mips/pci/fixup-bcm63xx.c create mode 100644 target/linux/brcm63xx/files/arch/mips/pci/ops-bcm63xx.c create mode 100644 target/linux/brcm63xx/files/arch/mips/pci/pci-bcm63xx.c create mode 100644 target/linux/brcm63xx/files/arch/mips/pci/pci-bcm63xx.h (limited to 'target/linux/brcm63xx/files/arch') diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/Kconfig b/target/linux/brcm63xx/files/arch/mips/bcm63xx/Kconfig new file mode 100644 index 000000000..8c192e747 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/Kconfig @@ -0,0 +1,21 @@ +menu "CPU support" + depends on BCM63XX + +config BCM63XX_CPU_6348 + bool "support 6348 CPU" + select HW_HAS_PCI + select USB_ARCH_HAS_OHCI + select USB_OHCI_BIG_ENDIAN_DESC + select USB_OHCI_BIG_ENDIAN_MMIO + +config BCM63XX_CPU_6358 + bool "support 6358 CPU" + select HW_HAS_PCI + select USB_ARCH_HAS_OHCI + select USB_OHCI_BIG_ENDIAN_DESC + select USB_OHCI_BIG_ENDIAN_MMIO + select USB_ARCH_HAS_EHCI + select USB_EHCI_BIG_ENDIAN_MMIO +endmenu + +source "arch/mips/bcm63xx/boards/Kconfig" diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/Makefile b/target/linux/brcm63xx/files/arch/mips/bcm63xx/Makefile new file mode 100644 index 000000000..10462ae64 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/Makefile @@ -0,0 +1,9 @@ +obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o +obj-y += dev-uart.o +obj-y += dev-pcmcia.o +obj-y += dev-usb-ohci.o +obj-y += dev-usb-ehci.o +obj-y += dev-enet.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-y += boards/ diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/Kconfig b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/Kconfig new file mode 100644 index 000000000..970615e67 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/Kconfig @@ -0,0 +1,15 @@ +choice + prompt "Board support" + depends on BCM63XX + default BOARD_BCM963XX + +config BOARD_BCM963XX + bool "Generic Broadcom 963xx boards" + help + +config BOARD_LIVEBOX + bool "Inventel Livebox(es) boards" + help + Boards using RedBoot. + +endchoice diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/Makefile b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/Makefile new file mode 100644 index 000000000..098137b59 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o +obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c new file mode 100644 index 000000000..1c3073efd --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -0,0 +1,383 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PFX "board_bcm963xx: " + +static struct bcm963xx_nvram nvram; +static unsigned int mac_addr_used = 0; +static struct board_info board; + +/* + * known 6348 boards + */ +#ifdef CONFIG_BCM63XX_CPU_6348 +static struct board_info __initdata board_96348r = { + .name = "96348R", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, +}; + +static struct board_info __initdata board_96348gw_11 = { + .name = "96348GW-11", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, +}; + +static struct board_info __initdata board_96348gw = { + .name = "96348GW", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, +}; +#endif + +/* + * known 6358 boards + */ +#ifdef CONFIG_BCM63XX_CPU_6358 +static struct board_info __initdata board_96358vw = { + .name = "96358VW", + .expected_cpu_id = 0x6358, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, +}; + +static struct board_info __initdata board_96358vw2 = { + .name = "96358VW2", + .expected_cpu_id = 0x6358, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, +}; +#endif + +/* + * all boards + */ +static const struct board_info __initdata *bcm963xx_boards[] = { +#ifdef CONFIG_BCM63XX_CPU_6348 + &board_96348r, + &board_96348gw, + &board_96348gw_11, +#endif + +#ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, + &board_96358vw2, +#endif +}; + +/* + * early init callback, read nvram data from flash and checksum it + */ +void __init board_prom_init(void) +{ + unsigned int check_len, i; + u8 *boot_addr, *cfe, *p; + char cfe_version[32]; + u32 val; + + /* read base address of boot chip select (0) */ + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; + boot_addr = (u8 *)KSEG1ADDR(val); + + /* dump cfe version */ + cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; + if (!memcmp(cfe, "cfe-v", 5)) + snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u", + cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]); + else + strcpy(cfe_version, "unknown"); + printk(KERN_INFO PFX "CFE version: %s\n", cfe_version); + + /* extract nvram data */ + memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram)); + + /* check checksum before using data */ + if (nvram.version <= 4) + check_len = offsetof(struct bcm963xx_nvram, checksum_old); + else + check_len = sizeof(nvram); + val = 0; + p = (u8 *)&nvram; + while (check_len--) + val += *p; + if (val) { + printk(KERN_ERR PFX "invalid nvram checksum\n"); + return; + } + + /* find board by name */ + for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) { + if (strncmp(nvram.name, bcm963xx_boards[i]->name, + sizeof(nvram.name))) + continue; + /* copy, board desc array is marked initdata */ + memcpy(&board, bcm963xx_boards[i], sizeof(board)); + break; + } + + /* bail out if board is not found, will complain later */ + if (!board.name[0]) { + char name[17]; + memcpy(name, nvram.name, 16); + name[16] = 0; + printk(KERN_ERR PFX "unknown bcm963xx board: %s\n", + name); + return; + } + + /* setup pin multiplexing depending on board enabled device, + * this has to be done this early since PCI init is done + * inside arch_initcall */ + val = 0; + + if (board.has_pci) { + bcm63xx_pci_enabled = 1; + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G2_PCI; + } + + if (board.has_pccard) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G1_MII_PCCARD; + } + + if (board.has_enet0 && !board.enet0.use_internal_phy) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G3_EXT_MII | + GPIO_MODE_6348_G0_EXT_MII; + } + + if (board.has_enet1 && !board.enet1.use_internal_phy) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G3_EXT_MII | + GPIO_MODE_6348_G0_EXT_MII; + } + + bcm_gpio_writel(val, GPIO_MODE_REG); +} + +/* + * second stage init callback, good time to panic if we couldn't + * identify on which board we're running since early printk is working + */ +void __init board_setup(void) +{ + if (!board.name[0]) + panic("unable to detect bcm963xx board"); + printk(KERN_INFO PFX "board name: %s\n", board.name); + + /* make sure we're running on expected cpu */ + if (bcm63xx_get_cpu_id() != board.expected_cpu_id) + panic("unexpected CPU for bcm963xx board"); +} + +/* + * return board name for /proc/cpuinfo + */ +const char *board_get_name(void) +{ + return board.name; +} + +/* + * register & return a new board mac address + */ +static int board_get_mac_address(u8 *mac) +{ + u8 *p; + int count; + + if (mac_addr_used >= nvram.mac_addr_count) { + printk(KERN_ERR PFX "not enough mac address\n"); + return -ENODEV; + } + + memcpy(mac, nvram.mac_addr_base, ETH_ALEN); + p = mac + ETH_ALEN - 1; + count = mac_addr_used; + + while (count--) { + do { + (*p)++; + if (*p != 0) + break; + p--; + } while (p != mac); + } + + if (p == mac) { + printk(KERN_ERR PFX "unable to fetch mac address\n"); + return -ENODEV; + } + + mac_addr_used++; + return 0; +} + +static struct mtd_partition mtd_partitions[] = { + { + .name = "cfe", + .offset = 0x0, + .size = 0x40000, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, + .nr_parts = ARRAY_SIZE(mtd_partitions), + .parts = mtd_partitions, +}; + +static struct resource mtd_resources[] = { + { + .start = 0, /* filled at runtime */ + .end = 0, /* filled at runtime */ + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device mtd_dev = { + .name = "physmap-flash", + .resource = mtd_resources, + .num_resources = ARRAY_SIZE(mtd_resources), + .dev = { + .platform_data = &flash_data, + }, +}; + +/* + * third stage init callback, register all board devices. + */ +int __init board_register_devices(void) +{ + u32 val; + + bcm63xx_uart_register(); + + if (board.has_pccard) + bcm63xx_pcmcia_register(); + + if (board.has_enet0 && + !board_get_mac_address(board.enet0.mac_addr)) + bcm63xx_enet_register(0, &board.enet0); + + if (board.has_enet1 && + !board_get_mac_address(board.enet1.mac_addr)) + bcm63xx_enet_register(1, &board.enet1); + + if (board.has_ohci0) + bcm63xx_ohci_register(); + + if (board.has_ehci0) + bcm63xx_ehci_register(); + + + /* read base address of boot chip select (0) */ + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; + mtd_resources[0].start = val; + mtd_resources[0].end = 0x1FFFFFFF; + + platform_device_register(&mtd_dev); + + return 0; +} + diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_livebox.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_livebox.c new file mode 100644 index 000000000..f38b5c212 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_livebox.c @@ -0,0 +1,172 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Florian Fainelli + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PFX "board_livebox: " + +static unsigned int mac_addr_used = 0; +static struct board_info board; + +/* + * known 6348 boards + */ +#ifdef CONFIG_BCM63XX_CPU_6348 +static struct board_info __initdata board_livebox = { + .name = "Livebox", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, +}; +#endif + +/* + * all boards + */ +static const struct board_info __initdata *bcm963xx_boards[] = { +#ifdef CONFIG_BCM63XX_CPU_6348 + &board_livebox +#endif +}; + +/* + * early init callback + */ +void __init board_prom_init(void) +{ + u32 val; + + /* read base address of boot chip select (0) */ + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; + + /* assume board is a Livebox */ + memcpy(&board, bcm963xx_boards[0], sizeof(board)); + + /* setup pin multiplexing depending on board enabled device, + * this has to be done this early since PCI init is done + * inside arch_initcall */ + val = 0; + + if (board.has_pci) { + bcm63xx_pci_enabled = 1; + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G2_PCI; + } + + if (board.has_pccard) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G1_MII_PCCARD; + } + + if (board.has_enet0 && !board.enet0.use_internal_phy) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G3_EXT_MII | + GPIO_MODE_6348_G0_EXT_MII; + } + + if (board.has_enet1 && !board.enet1.use_internal_phy) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G3_EXT_MII | + GPIO_MODE_6348_G0_EXT_MII; + } + + bcm_gpio_writel(val, GPIO_MODE_REG); +} + +/* + * second stage init callback, good time to panic if we couldn't + * identify on which board we're running since early printk is working + */ +void __init board_setup(void) +{ + if (!board.name[0]) + panic("unable to detect bcm963xx board"); + printk(KERN_INFO PFX "board name: %s\n", board.name); + + /* make sure we're running on expected cpu */ + if (bcm63xx_get_cpu_id() != board.expected_cpu_id) + panic("unexpected CPU for bcm963xx board"); +} + +/* + * return board name for /proc/cpuinfo + */ +const char *board_get_name(void) +{ + return board.name; +} + +/* + * register & return a new board mac address + */ +static int board_get_mac_address(u8 *mac) +{ + /* Not yet implemented */ + return 0; +} + +/* + * third stage init callback, register all board devices. + */ +int __init board_register_devices(void) +{ + u32 val; + + bcm63xx_uart_register(); + + if (board.has_pccard) + bcm63xx_pcmcia_register(); + + if (board.has_enet0 && + !board_get_mac_address(board.enet0.mac_addr)) + bcm63xx_enet_register(0, &board.enet0); + + if (board.has_enet1 && + !board_get_mac_address(board.enet1.mac_addr)) + bcm63xx_enet_register(1, &board.enet1); + + if (board.has_ohci0) + bcm63xx_ohci_register(); + + if (board.has_ehci0) + bcm63xx_ehci_register(); + + + /* read base address of boot chip select (0) */ + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; + + return 0; +} + diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/clk.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/clk.c new file mode 100644 index 000000000..ae1f41fe5 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/clk.c @@ -0,0 +1,220 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +DEFINE_MUTEX(clocks_mutex); + + +static void clk_enable_unlocked(struct clk *clk) +{ + if (clk->set && (clk->usage++) == 0) + clk->set(clk, 1); +} + +static void clk_disable_unlocked(struct clk *clk) +{ + if (clk->set && (--clk->usage) == 0) + clk->set(clk, 0); +} + +static void bcm_hwclock_set(u32 mask, int enable) +{ + u32 reg; + + reg = bcm_perf_readl(PERF_CKCTL_REG); + if (enable) + reg |= mask; + else + reg &= ~mask; + bcm_perf_writel(reg, PERF_CKCTL_REG); +} + +/* + * Ethernet MAC "misc" clock: dma clocks and main clock on 6348 + */ +static void enet_misc_set(struct clk *clk, int enable) +{ + u32 mask; + + if (BCMCPU_IS_6348()) + mask = CKCTL_6348_ENET_EN; + else + /* BCMCPU_IS_6358 */ + mask = CKCTL_6358_EMUSB_EN; + bcm_hwclock_set(mask, enable); +} + +static struct clk clk_enet_misc = { + .set = enet_misc_set, +}; + +/* + * Ethernet MAC clocks: only revelant on 6358, silently enable misc + * clocks + */ +static void enetx_set(struct clk *clk, int enable) +{ + if (enable) + clk_enable_unlocked(&clk_enet_misc); + else + clk_disable_unlocked(&clk_enet_misc); + + if (BCMCPU_IS_6358()) { + u32 mask; + + if (clk->id == 0) + mask = CKCTL_6358_ENET0_EN; + else + mask = CKCTL_6358_ENET1_EN; + bcm_hwclock_set(mask, enable); + } +} + +static struct clk clk_enet0 = { + .id = 0, + .set = enetx_set, +}; + +static struct clk clk_enet1 = { + .id = 1, + .set = enetx_set, +}; + +/* + * Ethernet PHY clock + */ +static void ephy_set(struct clk *clk, int enable) +{ + if (!BCMCPU_IS_6358()) + return; + bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable); +} + + +static struct clk clk_ephy = { + .set = ephy_set, +}; + +/* + * PCM clock + */ +static void pcm_set(struct clk *clk, int enable) +{ + if (!BCMCPU_IS_6358()) + return; + bcm_hwclock_set(CKCTL_6358_PCM_EN, enable); +} + +static struct clk clk_pcm = { + .set = pcm_set, +}; + +/* + * USB host clock + */ +static void usbh_set(struct clk *clk, int enable) +{ + if (!BCMCPU_IS_6348()) + return; + bcm_hwclock_set(CKCTL_6348_USBH_EN, enable); +} + +static struct clk clk_usbh = { + .set = usbh_set, +}; + +/* + * SPI clock + */ +static void spi_set(struct clk *clk, int enable) +{ + u32 mask; + + if (BCMCPU_IS_6348()) + mask = CKCTL_6348_SPI_EN; + else + /* BCMCPU_IS_6358 */ + mask = CKCTL_6358_SPI_EN; + bcm_hwclock_set(mask, enable); +} + +static struct clk clk_spi = { + .set = spi_set, +}; + +/* + * Internal peripheral clock + */ +static struct clk clk_periph = { + .rate = (50 * 1000 * 1000), +}; + + +/* + * Linux clock API implementation + */ +int clk_enable(struct clk *clk) +{ + mutex_lock(&clocks_mutex); + clk_enable_unlocked(clk); + mutex_unlock(&clocks_mutex); + return 0; +} + +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + mutex_lock(&clocks_mutex); + clk_disable_unlocked(clk); + mutex_unlock(&clocks_mutex); +} + +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} + +EXPORT_SYMBOL(clk_get_rate); + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "enet0")) + return &clk_enet0; + if (!strcmp(id, "enet1")) + return &clk_enet1; + if (!strcmp(id, "ephy")) + return &clk_ephy; + if (!strcmp(id, "usbh")) + return &clk_usbh; + if (!strcmp(id, "spi")) + return &clk_spi; + if (!strcmp(id, "periph")) + return &clk_periph; + if (BCMCPU_IS_6358() && !strcmp(id, "pcm")) + return &clk_pcm; + return ERR_PTR(-ENOENT); +} + +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} + +EXPORT_SYMBOL(clk_put); diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/cpu.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/cpu.c new file mode 100644 index 000000000..0a403dd07 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/cpu.c @@ -0,0 +1,245 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include +#include +#include + +const unsigned long *bcm63xx_regs_base; +EXPORT_SYMBOL(bcm63xx_regs_base); + +const int *bcm63xx_irqs; +EXPORT_SYMBOL(bcm63xx_irqs); + +static u16 bcm63xx_cpu_id; +static u16 bcm63xx_cpu_rev; +static unsigned int bcm63xx_cpu_freq; +static unsigned int bcm63xx_memory_size; + +/* + * 6348 register sets and irqs + */ +static const unsigned long bcm96348_regs_base[] = { + [RSET_DSL_LMEM] = BCM_6348_DSL_LMEM_BASE, + [RSET_PERF] = BCM_6348_PERF_BASE, + [RSET_TIMER] = BCM_6348_TIMER_BASE, + [RSET_WDT] = BCM_6348_WDT_BASE, + [RSET_UART0] = BCM_6348_UART0_BASE, + [RSET_GPIO] = BCM_6348_GPIO_BASE, + [RSET_SPI] = BCM_6348_SPI_BASE, + [RSET_OHCI0] = BCM_6348_OHCI0_BASE, + [RSET_OHCI_PRIV] = BCM_6348_OHCI_PRIV_BASE, + [RSET_USBH_PRIV] = BCM_6348_USBH_PRIV_BASE, + [RSET_MPI] = BCM_6348_MPI_BASE, + [RSET_PCMCIA] = BCM_6348_PCMCIA_BASE, + [RSET_SDRAM] = BCM_6348_SDRAM_BASE, + [RSET_DSL] = BCM_6348_DSL_BASE, + [RSET_ENET0] = BCM_6348_ENET0_BASE, + [RSET_ENET1] = BCM_6348_ENET1_BASE, + [RSET_ENETDMA] = BCM_6348_ENETDMA_BASE, + [RSET_MEMC] = BCM_6348_MEMC_BASE, + [RSET_DDR] = BCM_6348_DDR_BASE, +}; + +static const int bcm96348_irqs[] = { + [IRQ_TIMER] = BCM_6348_TIMER_IRQ, + [IRQ_UART0] = BCM_6348_UART0_IRQ, + [IRQ_DSL] = BCM_6348_DSL_IRQ, + [IRQ_ENET0] = BCM_6348_ENET0_IRQ, + [IRQ_ENET1] = BCM_6348_ENET1_IRQ, + [IRQ_ENET_PHY] = BCM_6348_ENET_PHY_IRQ, + [IRQ_OHCI0] = BCM_6348_OHCI0_IRQ, + [IRQ_PCMCIA] = BCM_6348_PCMCIA_IRQ, + [IRQ_ENET0_RXDMA] = BCM_6348_ENET0_RXDMA_IRQ, + [IRQ_ENET0_TXDMA] = BCM_6348_ENET0_TXDMA_IRQ, + [IRQ_ENET1_RXDMA] = BCM_6348_ENET1_RXDMA_IRQ, + [IRQ_ENET1_TXDMA] = BCM_6348_ENET1_TXDMA_IRQ, + [IRQ_PCI] = BCM_6348_PCI_IRQ, +}; + +/* + * 6358 register sets and irqs + */ +static const unsigned long bcm96358_regs_base[] = { + [RSET_DSL_LMEM] = BCM_6358_DSL_LMEM_BASE, + [RSET_PERF] = BCM_6358_PERF_BASE, + [RSET_TIMER] = BCM_6358_TIMER_BASE, + [RSET_WDT] = BCM_6358_WDT_BASE, + [RSET_UART0] = BCM_6358_UART0_BASE, + [RSET_GPIO] = BCM_6358_GPIO_BASE, + [RSET_SPI] = BCM_6358_SPI_BASE, + [RSET_OHCI0] = BCM_6358_OHCI0_BASE, + [RSET_EHCI0] = BCM_6358_EHCI0_BASE, + [RSET_OHCI_PRIV] = BCM_6358_OHCI_PRIV_BASE, + [RSET_USBH_PRIV] = BCM_6358_USBH_PRIV_BASE, + [RSET_MPI] = BCM_6358_MPI_BASE, + [RSET_PCMCIA] = BCM_6358_PCMCIA_BASE, + [RSET_SDRAM] = BCM_6358_SDRAM_BASE, + [RSET_DSL] = BCM_6358_DSL_BASE, + [RSET_ENET0] = BCM_6358_ENET0_BASE, + [RSET_ENET1] = BCM_6358_ENET1_BASE, + [RSET_ENETDMA] = BCM_6358_ENETDMA_BASE, + [RSET_MEMC] = BCM_6358_MEMC_BASE, + [RSET_DDR] = BCM_6358_DDR_BASE, +}; + +static const int bcm96358_irqs[] = { + [IRQ_TIMER] = BCM_6358_TIMER_IRQ, + [IRQ_UART0] = BCM_6358_UART0_IRQ, + [IRQ_DSL] = BCM_6358_DSL_IRQ, + [IRQ_ENET0] = BCM_6358_ENET0_IRQ, + [IRQ_ENET1] = BCM_6358_ENET1_IRQ, + [IRQ_ENET_PHY] = BCM_6358_ENET_PHY_IRQ, + [IRQ_OHCI0] = BCM_6358_OHCI0_IRQ, + [IRQ_EHCI0] = BCM_6358_EHCI0_IRQ, + [IRQ_PCMCIA] = BCM_6358_PCMCIA_IRQ, + [IRQ_ENET0_RXDMA] = BCM_6358_ENET0_RXDMA_IRQ, + [IRQ_ENET0_TXDMA] = BCM_6358_ENET0_TXDMA_IRQ, + [IRQ_ENET1_RXDMA] = BCM_6358_ENET1_RXDMA_IRQ, + [IRQ_ENET1_TXDMA] = BCM_6358_ENET1_TXDMA_IRQ, + [IRQ_PCI] = BCM_6358_PCI_IRQ, +}; + +u16 __bcm63xx_get_cpu_id(void) +{ + return bcm63xx_cpu_id; +} + +EXPORT_SYMBOL(__bcm63xx_get_cpu_id); + +u16 bcm63xx_get_cpu_rev(void) +{ + return bcm63xx_cpu_rev; +} + +EXPORT_SYMBOL(bcm63xx_get_cpu_rev); + +unsigned int bcm63xx_get_cpu_freq(void) +{ + return bcm63xx_cpu_freq; +} + +unsigned int bcm63xx_get_memory_size(void) +{ + return bcm63xx_memory_size; +} + +static unsigned int detect_cpu_clock(void) +{ + unsigned int tmp, n1 = 0, n2 = 0, m1 = 0; + + /* + * frequency depends on PLL configuration: + */ + if (BCMCPU_IS_6348()) { + /* 16MHz * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) */ + tmp = bcm_perf_readl(PERF_MIPSPLLCTL_REG); + n1 = (tmp & MIPSPLLCTL_N1_MASK) >> MIPSPLLCTL_N1_SHIFT; + n2 = (tmp & MIPSPLLCTL_N2_MASK) >> MIPSPLLCTL_N2_SHIFT; + m1 = (tmp & MIPSPLLCTL_M1CPU_MASK) >> MIPSPLLCTL_M1CPU_SHIFT; + n1 += 1; + n2 += 2; + m1 += 1; + } + + if (BCMCPU_IS_6358()) { + /* 16MHz * N1 * N2 / M1_CPU */ + tmp = bcm_ddr_readl(DDR_DMIPSPLLCFG_REG); + n1 = (tmp & DMIPSPLLCFG_N1_MASK) >> DMIPSPLLCFG_N1_SHIFT; + n2 = (tmp & DMIPSPLLCFG_N2_MASK) >> DMIPSPLLCFG_N2_SHIFT; + m1 = (tmp & DMIPSPLLCFG_M1_MASK) >> DMIPSPLLCFG_M1_SHIFT; + } + + return (16 * 1000000 * n1 * n2) / m1; +} + +/* + * attempt to detect the amount of memory installed + */ +static unsigned int detect_memory_size(void) +{ + unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0; + u32 val; + + if (BCMCPU_IS_6348()) { + val = bcm_sdram_readl(SDRAM_CFG_REG); + rows = (val & SDRAM_CFG_ROW_MASK) >> SDRAM_CFG_ROW_SHIFT; + cols = (val & SDRAM_CFG_COL_MASK) >> SDRAM_CFG_COL_SHIFT; + is_32bits = (val & SDRAM_CFG_32B_MASK) ? 1 : 0; + banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1; + } + + if (BCMCPU_IS_6358()) { + val = bcm_memc_readl(MEMC_CFG_REG); + rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT; + cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT; + is_32bits = (val & MEMC_CFG_32B_MASK) ? 0 : 1; + banks = 2; + } + + /* 0 => 11 address bits ... 2 => 13 address bits */ + rows += 11; + + /* 0 => 8 address bits ... 2 => 10 address bits */ + cols += 8; + + return 1 << (cols + rows + (is_32bits + 1) + banks); +} + +void __init bcm63xx_cpu_init(void) +{ + unsigned int tmp, expected_cpu_id; + struct cpuinfo_mips *c = ¤t_cpu_data; + + /* soc registers location depends on cpu type */ + expected_cpu_id = 0; + + switch (c->cputype) { + case CPU_BCM6348: + expected_cpu_id = BCM6348_CPU_ID; + bcm63xx_regs_base = bcm96348_regs_base; + bcm63xx_irqs = bcm96348_irqs; + break; + case CPU_BCM6358: + expected_cpu_id = BCM6358_CPU_ID; + bcm63xx_regs_base = bcm96358_regs_base; + bcm63xx_irqs = bcm96358_irqs; + break; + } + + /* really early to panic, but delaying panic would not help + * since we will never get any working console */ + if (!expected_cpu_id) + panic("unsupported Broadcom CPU"); + + /* + * bcm63xx_regs_base is set, we can access soc registers + */ + + /* double check CPU type */ + tmp = bcm_perf_readl(PERF_REV_REG); + bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT; + bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT; + + if (bcm63xx_cpu_id != expected_cpu_id) + panic("bcm63xx CPU id mismatch"); + + bcm63xx_cpu_freq = detect_cpu_clock(); + bcm63xx_memory_size = detect_memory_size(); + + printk(KERN_INFO "Detected Broadcom 0x%04x CPU revision %02x\n", + bcm63xx_cpu_id, bcm63xx_cpu_rev); + printk(KERN_INFO "CPU frequency is %u MHz\n", + bcm63xx_cpu_freq); + printk(KERN_INFO "%uMB of RAM installed\n", + bcm63xx_memory_size >> 20); +} diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/cs.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/cs.c new file mode 100644 index 000000000..50d8190bb --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/cs.c @@ -0,0 +1,144 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static DEFINE_SPINLOCK(bcm63xx_cs_lock); + +/* + * check if given chip select exists + */ +static int is_valid_cs(unsigned int cs) +{ + if (cs > 6) + return 0; + return 1; +} + +/* + * Configure chipselect base address and size (bytes). + * Size must be a power of two between 8k and 256M. + */ +int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size) +{ + unsigned long flags; + u32 val; + + if (!is_valid_cs(cs)) + return -EINVAL; + + /* sanity check on size */ + if (size != roundup_pow_of_two(size)) + return -EINVAL; + + if (size < 8 * 1024 || size > 256 * 1024 * 1024) + return -EINVAL; + + val = (base & MPI_CSBASE_BASE_MASK); + /* 8k => 0 - 256M => 15 */ + val |= (ilog2(size) - ilog2(8 * 1024)) << MPI_CSBASE_SIZE_SHIFT; + + spin_lock_irqsave(&bcm63xx_cs_lock, flags); + bcm_mpi_writel(val, MPI_CSBASE_REG(cs)); + spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); + + return 0; +} + +EXPORT_SYMBOL(bcm63xx_set_cs_base); + +/* + * configure chipselect timing (ns) + */ +int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait, + unsigned int setup, unsigned int hold) +{ + unsigned long flags; + u32 val; + + if (!is_valid_cs(cs)) + return -EINVAL; + + spin_lock_irqsave(&bcm63xx_cs_lock, flags); + val = bcm_mpi_readl(MPI_CSCTL_REG(cs)); + val &= ~(MPI_CSCTL_WAIT_MASK); + val &= ~(MPI_CSCTL_SETUP_MASK); + val &= ~(MPI_CSCTL_HOLD_MASK); + val |= wait << MPI_CSCTL_WAIT_SHIFT; + val |= setup << MPI_CSCTL_SETUP_SHIFT; + val |= hold << MPI_CSCTL_HOLD_SHIFT; + bcm_mpi_writel(val, MPI_CSCTL_REG(cs)); + spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); + + return 0; +} + +EXPORT_SYMBOL(bcm63xx_set_cs_timing); + +/* + * configure other chipselect parameter (data bus size, ...) + */ +int bcm63xx_set_cs_param(unsigned int cs, u32 params) +{ + unsigned long flags; + u32 val; + + if (!is_valid_cs(cs)) + return -EINVAL; + + /* none of this fields apply to pcmcia */ + if (cs == MPI_CS_PCMCIA_COMMON || + cs == MPI_CS_PCMCIA_ATTR || + cs == MPI_CS_PCMCIA_IO) + return -EINVAL; + + spin_lock_irqsave(&bcm63xx_cs_lock, flags); + val = bcm_mpi_readl(MPI_CSCTL_REG(cs)); + val &= ~(MPI_CSCTL_DATA16_MASK); + val &= ~(MPI_CSCTL_SYNCMODE_MASK); + val &= ~(MPI_CSCTL_TSIZE_MASK); + val &= ~(MPI_CSCTL_ENDIANSWAP_MASK); + val |= params; + bcm_mpi_writel(val, MPI_CSCTL_REG(cs)); + spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); + + return 0; +} + +EXPORT_SYMBOL(bcm63xx_set_cs_param); + +/* + * set cs status (enable/disable) + */ +int bcm63xx_set_cs_status(unsigned int cs, int enable) +{ + unsigned long flags; + u32 val; + + if (!is_valid_cs(cs)) + return -EINVAL; + + spin_lock_irqsave(&bcm63xx_cs_lock, flags); + val = bcm_mpi_readl(MPI_CSCTL_REG(cs)); + if (enable) + val |= MPI_CSCTL_ENABLE_MASK; + else + val &= ~MPI_CSCTL_ENABLE_MASK; + bcm_mpi_writel(val, MPI_CSCTL_REG(cs)); + spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); + return 0; +} + +EXPORT_SYMBOL(bcm63xx_set_cs_status); diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-enet.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-enet.c new file mode 100644 index 000000000..c6e472ebf --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-enet.c @@ -0,0 +1,158 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include +#include + +static struct resource shared_res[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bcm63xx_enet_shared_device = { + .name = "bcm63xx_enet_shared", + .id = 0, + .num_resources = ARRAY_SIZE(shared_res), + .resource = shared_res, +}; + +static int shared_device_registered = 0; + +static struct resource enet0_res[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, + { + .start = -1, /* filled at runtime */ + .start = IRQ_ENET0_RXDMA, + .flags = IORESOURCE_IRQ, + }, + { + .start = -1, /* filled at runtime */ + .start = IRQ_ENET0_TXDMA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct bcm63xx_enet_platform_data enet0_pd; + +static struct platform_device bcm63xx_enet0_device = { + .name = "bcm63xx_enet", + .id = 0, + .num_resources = ARRAY_SIZE(enet0_res), + .resource = enet0_res, + .dev = { + .platform_data = &enet0_pd, + }, +}; + +static struct resource enet1_res[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct bcm63xx_enet_platform_data enet1_pd; + +static struct platform_device bcm63xx_enet1_device = { + .name = "bcm63xx_enet", + .id = 1, + .num_resources = ARRAY_SIZE(enet1_res), + .resource = enet1_res, + .dev = { + .platform_data = &enet1_pd, + }, +}; + +int __init bcm63xx_enet_register(int unit, + const struct bcm63xx_enet_platform_data *pd) +{ + struct platform_device *pdev; + struct bcm63xx_enet_platform_data *dpd; + int ret; + + if (unit > 1) + return -ENODEV; + + if (!shared_device_registered) { + shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA); + shared_res[0].end = shared_res[0].start; + shared_res[0].end += RSET_ENETDMA_SIZE - 1; + + ret = platform_device_register(&bcm63xx_enet_shared_device); + if (ret) + return ret; + shared_device_registered = 1; + } + + if (unit == 0) { + enet0_res[0].start = bcm63xx_regset_address(RSET_ENET0); + enet0_res[0].end = enet0_res[0].start; + enet0_res[0].end += RSET_ENET_SIZE - 1; + enet0_res[1].start = bcm63xx_get_irq_number(IRQ_ENET0); + enet0_res[2].start = bcm63xx_get_irq_number(IRQ_ENET0_RXDMA); + enet0_res[3].start = bcm63xx_get_irq_number(IRQ_ENET0_TXDMA); + pdev = &bcm63xx_enet0_device; + } else { + enet1_res[0].start = bcm63xx_regset_address(RSET_ENET1); + enet1_res[0].end = enet1_res[0].start; + enet1_res[0].end += RSET_ENET_SIZE - 1; + enet1_res[1].start = bcm63xx_get_irq_number(IRQ_ENET1); + enet1_res[2].start = bcm63xx_get_irq_number(IRQ_ENET1_RXDMA); + enet1_res[3].start = bcm63xx_get_irq_number(IRQ_ENET1_TXDMA); + pdev = &bcm63xx_enet1_device; + } + + /* copy given platform data */ + dpd = pdev->dev.platform_data; + memcpy(dpd, pd, sizeof (*pd)); + + /* adjust them in case internal phy is used */ + if (dpd->use_internal_phy) { + + /* internal phy only exists for enet0 */ + if (unit == 1) + return -ENODEV; + + dpd->phy_id = 1; + dpd->has_phy_interrupt = 1; + dpd->phy_interrupt = bcm63xx_get_irq_number(IRQ_ENET_PHY); + } + + ret = platform_device_register(pdev); + if (ret) + return ret; + return 0; +} diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-pcmcia.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-pcmcia.c new file mode 100644 index 000000000..40ec4bcd5 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-pcmcia.c @@ -0,0 +1,135 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct resource pcmcia_resources[] = { + /* pcmcia registers */ + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, + + /* pcmcia memory zone resources */ + { + .start = BCM_PCMCIA_COMMON_BASE_PA, + .end = BCM_PCMCIA_COMMON_END_PA, + .flags = IORESOURCE_MEM, + }, + { + .start = BCM_PCMCIA_ATTR_BASE_PA, + .end = BCM_PCMCIA_ATTR_END_PA, + .flags = IORESOURCE_MEM, + }, + { + .start = BCM_PCMCIA_IO_BASE_PA, + .end = BCM_PCMCIA_IO_END_PA, + .flags = IORESOURCE_MEM, + }, + + /* PCMCIA irq */ + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, + + /* declare PCMCIA IO resource also */ + { + .start = BCM_PCMCIA_IO_BASE_PA, + .end = BCM_PCMCIA_IO_END_PA, + .flags = IORESOURCE_IO, + }, +}; + +static struct bcm63xx_pcmcia_platform_data pd; + +static struct platform_device bcm63xx_pcmcia_device = { + .name = "bcm63xx_pcmcia", + .id = 0, + .num_resources = ARRAY_SIZE(pcmcia_resources), + .resource = pcmcia_resources, + .dev = { + .platform_data = &pd, + }, +}; + +static int __init config_pcmcia_cs(unsigned int cs, + u32 base, unsigned int size) +{ + int ret; + + ret = bcm63xx_set_cs_status(cs, 0); + if (!ret) + ret = bcm63xx_set_cs_base(cs, base, size); + if (!ret) + ret = bcm63xx_set_cs_status(cs, 1); + return ret; +} + +static const __initdata unsigned int pcmcia_cs[3][3] = { + /* cs, base address, size */ + { MPI_CS_PCMCIA_COMMON, BCM_PCMCIA_COMMON_BASE_PA, + BCM_PCMCIA_COMMON_SIZE }, + + { MPI_CS_PCMCIA_ATTR, BCM_PCMCIA_ATTR_BASE_PA, + BCM_PCMCIA_ATTR_SIZE }, + + { MPI_CS_PCMCIA_IO, BCM_PCMCIA_IO_BASE_PA, + BCM_PCMCIA_IO_SIZE }, +}; + +int __init bcm63xx_pcmcia_register(void) +{ + int ret, i; + + if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) + return 0; + + /* use correct pcmcia ready gpio depending on processor */ + switch (bcm63xx_get_cpu_id()) { + case BCM6348_CPU_ID: + pd.ready_gpio = 22; + break; + + case BCM6358_CPU_ID: + pd.ready_gpio = 22; + break; + + default: + return -ENODEV; + } + + pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA); + pcmcia_resources[0].end = pcmcia_resources[0].start; + pcmcia_resources[0].end += RSET_PCMCIA_SIZE - 1; + pcmcia_resources[4].start = bcm63xx_get_irq_number(IRQ_PCMCIA); + + /* configure pcmcia chip selects */ + for (i = 0; i < 3; i++) { + ret = config_pcmcia_cs(pcmcia_cs[i][0], + pcmcia_cs[i][1], + pcmcia_cs[i][2]); + if (ret) + goto out_err; + } + + return platform_device_register(&bcm63xx_pcmcia_device); + +out_err: + printk(KERN_ERR "unable to set pcmcia chip select"); + return ret; +} diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-uart.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-uart.c new file mode 100644 index 000000000..5f3d89c4a --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-uart.c @@ -0,0 +1,41 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include + +static struct resource uart_resources[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bcm63xx_uart_device = { + .name = "bcm63xx_uart", + .id = 0, + .num_resources = ARRAY_SIZE(uart_resources), + .resource = uart_resources, +}; + +int __init bcm63xx_uart_register(void) +{ + uart_resources[0].start = bcm63xx_regset_address(RSET_UART0); + uart_resources[0].end = uart_resources[0].start; + uart_resources[0].end += RSET_UART_SIZE - 1; + uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0); + return platform_device_register(&bcm63xx_uart_device); +} diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-usb-ehci.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-usb-ehci.c new file mode 100644 index 000000000..7885405f7 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-usb-ehci.c @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include + +static struct resource ehci_resources[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ehci_dmamask = ~(u32)0; + +static struct platform_device bcm63xx_ehci_device = { + .name = "bcm63xx_ehci", + .id = 0, + .num_resources = ARRAY_SIZE(ehci_resources), + .resource = ehci_resources, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, +}; + +int __init bcm63xx_ehci_register(void) +{ + if (!BCMCPU_IS_6358()) + return 0; + + ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0); + ehci_resources[0].end = ehci_resources[0].start; + ehci_resources[0].end += RSET_EHCI_SIZE - 1; + ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0); + return platform_device_register(&bcm63xx_ehci_device); +} diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-usb-ohci.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-usb-ohci.c new file mode 100644 index 000000000..377e67cf2 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/dev-usb-ohci.c @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include + +static struct resource ohci_resources[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ohci_dmamask = ~(u32)0; + +static struct platform_device bcm63xx_ohci_device = { + .name = "bcm63xx_ohci", + .id = 0, + .num_resources = ARRAY_SIZE(ohci_resources), + .resource = ohci_resources, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, +}; + +int __init bcm63xx_ohci_register(void) +{ + if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) + return 0; + + ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0); + ohci_resources[0].end = ohci_resources[0].start; + ohci_resources[0].end += RSET_OHCI_SIZE - 1; + ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0); + return platform_device_register(&bcm63xx_ohci_device); +} diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/early_printk.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/early_printk.c new file mode 100644 index 000000000..bf353c937 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/early_printk.c @@ -0,0 +1,30 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include + +static void __init wait_xfered(void) +{ + unsigned int val; + + /* wait for any previous char to be transmitted */ + do { + val = bcm_uart0_readl(UART_IR_REG); + if (val & UART_IR_STAT(UART_IR_TXEMPTY)) + break; + } while (1); +} + +void __init prom_putchar(char c) +{ + wait_xfered(); + bcm_uart0_writel(c, UART_FIFO_REG); + wait_xfered(); +} diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/gpio.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/gpio.c new file mode 100644 index 000000000..2c203a69e --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/gpio.c @@ -0,0 +1,98 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include +#include +#include + +static DEFINE_SPINLOCK(bcm63xx_gpio_lock); + +void bcm63xx_gpio_set_dataout(int gpio, int val) +{ + u32 reg; + u32 mask; + u32 tmp; + unsigned long flags; + + if (gpio >= BCM63XX_GPIO_COUNT) + BUG(); + + if (gpio < 32) { + reg = GPIO_DATA_LO_REG; + mask = 1 << gpio; + } else { + reg = GPIO_DATA_HI_REG; + mask = 1 << (gpio - 32); + } + + spin_lock_irqsave(&bcm63xx_gpio_lock, flags); + tmp = bcm_gpio_readl(reg); + if (val) + tmp |= mask; + else + tmp &= ~mask; + bcm_gpio_writel(tmp, reg); + spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags); +} + +EXPORT_SYMBOL(bcm63xx_gpio_set_dataout); + +int bcm63xx_gpio_get_datain(int gpio) +{ + u32 reg; + u32 mask; + + if (gpio >= BCM63XX_GPIO_COUNT) + BUG(); + + if (gpio < 32) { + reg = GPIO_DATA_LO_REG; + mask = 1 << gpio; + } else { + reg = GPIO_DATA_HI_REG; + mask = 1 << (gpio - 32); + } + + return !!(bcm_gpio_readl(reg) & mask); +} + +EXPORT_SYMBOL(bcm63xx_gpio_get_datain); + +void bcm63xx_gpio_set_direction(int gpio, int dir) +{ + u32 reg; + u32 mask; + u32 tmp; + unsigned long flags; + + if (gpio >= BCM63XX_GPIO_COUNT) + BUG(); + + if (gpio < 32) { + reg = GPIO_CTL_LO_REG; + mask = 1 << gpio; + } else { + reg = GPIO_CTL_HI_REG; + mask = 1 << (gpio - 32); + } + + spin_lock_irqsave(&bcm63xx_gpio_lock, flags); + tmp = bcm_gpio_readl(reg); + if (dir == GPIO_DIR_IN) + tmp &= ~mask; + else + tmp |= mask; + bcm_gpio_writel(tmp, reg); + spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags); +} + +EXPORT_SYMBOL(bcm63xx_gpio_set_direction); diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/irq.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/irq.c new file mode 100644 index 000000000..a0c5cd18c --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/irq.c @@ -0,0 +1,253 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + * Copyright (C) 2008 Nicolas Schichan + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not + * prioritize any interrupt relatively to another. the static counter + * will resume the loop where it ended the last time we left this + * function. + */ +static void bcm63xx_irq_dispatch_internal(void) +{ + u32 pending; + static int i; + + pending = bcm_perf_readl(PERF_IRQMASK_REG) & + bcm_perf_readl(PERF_IRQSTAT_REG); + + if (!pending) + return ; + + while (1) { + int to_call = i; + + i = (i + 1) & 0x1f; + if (pending & (1 << to_call)) { + do_IRQ(to_call + IRQ_INTERNAL_BASE); + break; + } + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + u32 cause; + + do { + cause = read_c0_cause() & read_c0_status() & ST0_IM; + + if (!cause) + break; + + if (cause & CAUSEF_IP7) + do_IRQ(7); + if (cause & CAUSEF_IP2) + bcm63xx_irq_dispatch_internal(); + if (cause & CAUSEF_IP3) + do_IRQ(IRQ_EXT_0); + if (cause & CAUSEF_IP4) + do_IRQ(IRQ_EXT_1); + if (cause & CAUSEF_IP5) + do_IRQ(IRQ_EXT_2); + if (cause & CAUSEF_IP6) + do_IRQ(IRQ_EXT_3); + } while (1); +} + +/* + * internal IRQs operations: only mask/unmask on PERF irq mask + * register. + */ +static inline void bcm63xx_internal_irq_mask(unsigned int irq) +{ + u32 mask; + + irq -= IRQ_INTERNAL_BASE; + mask = bcm_perf_readl(PERF_IRQMASK_REG); + mask &= ~(1 << irq); + bcm_perf_writel(mask, PERF_IRQMASK_REG); +} + +static void bcm63xx_internal_irq_unmask(unsigned int irq) +{ + u32 mask; + + irq -= IRQ_INTERNAL_BASE; + mask = bcm_perf_readl(PERF_IRQMASK_REG); + mask |= (1 << irq); + bcm_perf_writel(mask, PERF_IRQMASK_REG); +} + +static unsigned int bcm63xx_internal_irq_startup(unsigned int irq) +{ + bcm63xx_internal_irq_unmask(irq); + return 0; +} + +/* + * external IRQs operations: mask/unmask and clear on PERF external + * irq control register. + */ +static void bcm63xx_external_irq_mask(unsigned int irq) +{ + u32 reg; + + irq -= IRQ_EXT_BASE; + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + reg &= ~EXTIRQ_CFG_MASK(irq); + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); +} + +static void bcm63xx_external_irq_unmask(unsigned int irq) +{ + u32 reg; + + irq -= IRQ_EXT_BASE; + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + reg |= EXTIRQ_CFG_MASK(irq); + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); +} + +static void bcm63xx_external_irq_clear(unsigned int irq) +{ + u32 reg; + + irq -= IRQ_EXT_BASE; + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + reg |= EXTIRQ_CFG_CLEAR(irq); + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); +} + +static unsigned int bcm63xx_external_irq_startup(unsigned int irq) +{ + set_c0_status(0x100 << (irq - IRQ_MIPS_BASE)); + irq_enable_hazard(); + bcm63xx_external_irq_unmask(irq); + return 0; +} + +static void bcm63xx_external_irq_shutdown(unsigned int irq) +{ + bcm63xx_external_irq_mask(irq); + clear_c0_status(0x100 << (irq - IRQ_MIPS_BASE)); + irq_disable_hazard(); +} + +static int bcm63xx_external_irq_set_type(unsigned int irq, + unsigned int flow_type) +{ + u32 reg; + struct irq_desc *desc = irq_desc + irq; + + irq -= IRQ_EXT_BASE; + + flow_type &= IRQ_TYPE_SENSE_MASK; + + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + switch (flow_type) { + case IRQ_TYPE_EDGE_BOTH: + reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); + reg |= EXTIRQ_CFG_BOTHEDGE(irq); + break; + + case IRQ_TYPE_EDGE_RISING: + reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); + reg |= EXTIRQ_CFG_SENSE(irq); + reg &= ~EXTIRQ_CFG_BOTHEDGE(irq); + break; + + case IRQ_TYPE_EDGE_FALLING: + reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); + reg &= ~EXTIRQ_CFG_SENSE(irq); + reg &= ~EXTIRQ_CFG_BOTHEDGE(irq); + break; + + case IRQ_TYPE_LEVEL_HIGH: + reg |= EXTIRQ_CFG_LEVELSENSE(irq); + reg |= EXTIRQ_CFG_SENSE(irq); + break; + + case IRQ_TYPE_LEVEL_LOW: + reg |= EXTIRQ_CFG_LEVELSENSE(irq); + reg &= ~EXTIRQ_CFG_SENSE(irq); + break; + + default: + printk(KERN_ERR "bogus flow type combination given !\n"); + return -EINVAL; + } + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); + + if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) { + desc->status |= IRQ_LEVEL; + desc->handle_irq = handle_level_irq; + } else { + desc->handle_irq = handle_edge_irq; + } + + return 0; +} + +static struct irq_chip bcm63xx_internal_irq_chip = { + .name = "bcm63xx_ipic", + .startup = bcm63xx_internal_irq_startup, + .shutdown = bcm63xx_internal_irq_mask, + + .mask = bcm63xx_internal_irq_mask, + .mask_ack = bcm63xx_internal_irq_mask, + .unmask = bcm63xx_internal_irq_unmask, +}; + +static struct irq_chip bcm63xx_external_irq_chip = { + .name = "bcm63xx_epic", + .startup = bcm63xx_external_irq_startup, + .shutdown = bcm63xx_external_irq_shutdown, + + .ack = bcm63xx_external_irq_clear, + + .mask = bcm63xx_external_irq_mask, + .unmask = bcm63xx_external_irq_unmask, + + .set_type = bcm63xx_external_irq_set_type, +}; + +static struct irqaction cpu_ip2_cascade_action = { + .handler = no_action, + .name = "cascade_ip2", +}; + +void __init arch_init_irq(void) +{ + int i; + + mips_cpu_irq_init(); + for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i) + set_irq_chip_and_handler(i, &bcm63xx_internal_irq_chip, + handle_level_irq); + + for (i = IRQ_EXT_BASE; i < IRQ_EXT_BASE + 4; ++i) + set_irq_chip_and_handler(i, &bcm63xx_external_irq_chip, + handle_edge_irq); + + setup_irq(IRQ_MIPS_BASE + 2, &cpu_ip2_cascade_action); +} diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/prom.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/prom.c new file mode 100644 index 000000000..d97ceed02 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/prom.c @@ -0,0 +1,47 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include +#include +#include + +void __init prom_init(void) +{ + u32 reg, mask; + + bcm63xx_cpu_init(); + + /* stop any running watchdog */ + bcm_wdt_writel(WDT_STOP_1, WDT_CTL_REG); + bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG); + + /* disable all hardware blocks clock for now */ + if (BCMCPU_IS_6348()) + mask = CKCTL_6348_ALL_SAFE_EN; + else + /* BCMCPU_IS_6358() */ + mask = CKCTL_6358_ALL_SAFE_EN; + + reg = bcm_perf_readl(PERF_CKCTL_REG); + reg &= ~mask; + bcm_perf_writel(reg, PERF_CKCTL_REG); + + /* assign command line from kernel config */ + strcpy(arcs_cmdline, CONFIG_CMDLINE); + + /* do low level board init */ + board_prom_init(); +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/setup.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/setup.c new file mode 100644 index 000000000..c4516fbc3 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/setup.c @@ -0,0 +1,122 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +void bcm63xx_machine_halt(void) +{ + printk(KERN_INFO "System halted\n"); + while (1); +} + +static void bcm6348_a1_reboot(void) +{ + u32 reg; + + /* soft reset all blocks */ + printk(KERN_INFO "soft-reseting all blocks ...\n"); + reg = bcm_perf_readl(PERF_SOFTRESET_REG); + reg &= ~SOFTRESET_6348_ALL; + bcm_perf_writel(reg, PERF_SOFTRESET_REG); + mdelay(10); + + reg = bcm_perf_readl(PERF_SOFTRESET_REG); + reg |= SOFTRESET_6348_ALL; + bcm_perf_writel(reg, PERF_SOFTRESET_REG); + mdelay(10); + + /* Jump to the power on address. */ + printk(KERN_INFO "jumping to reset vector.\n"); + /* set high vectors (base at 0xbfc00000 */ + set_c0_status(ST0_BEV | ST0_ERL); + /* run uncached in kseg0 */ + change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); + __flush_cache_all(); + /* remove all wired TLB entries */ + write_c0_wired(0); + __asm__ __volatile__( + "jr\t%0" + : + : "r" (0xbfc00000)); + while (1); +} + +void bcm63xx_machine_reboot(void) +{ + u32 reg; + + /* mask and clear all external irq */ + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + reg &= ~EXTIRQ_CFG_MASK_ALL; + reg |= EXTIRQ_CFG_CLEAR_ALL; + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); + + if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1)) + bcm6348_a1_reboot(); + + printk(KERN_INFO "triggering watchdog soft-reset...\n"); + bcm_perf_writel(SYS_PLL_SOFT_RESET, PERF_SYS_PLL_CTL_REG); + while (1); +} + +static void __bcm63xx_machine_reboot(char *p) +{ + bcm63xx_machine_reboot(); +} + +/* + * return system type in /proc/cpuinfo + */ +const char *get_system_type(void) +{ + static char buf[128]; + snprintf(buf, sizeof (buf), "bcm63xx/%s (0x%04x/0x%04X)", + board_get_name(), + bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev()); + return buf; +} + +void __init plat_time_init(void) +{ + mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2; +} + +void __init plat_mem_setup(void) +{ + add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM); + + _machine_halt = bcm63xx_machine_halt; + _machine_restart = __bcm63xx_machine_reboot; + pm_power_off = bcm63xx_machine_halt; + + set_io_port_base(0); + ioport_resource.start = 0; + ioport_resource.end = ~0; + + board_setup(); +} + +int __init bcm63xx_register_devices(void) +{ + return board_register_devices(); +} + +device_initcall(bcm63xx_register_devices); diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/timer.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/timer.c new file mode 100644 index 000000000..ba522bdcd --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/timer.c @@ -0,0 +1,205 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static DEFINE_SPINLOCK(timer_reg_lock); +static DEFINE_SPINLOCK(timer_data_lock); +static struct clk *periph_clk; + +static struct timer_data { + void (*cb)(void *); + void *data; +} timer_data[BCM63XX_TIMER_COUNT]; + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + u32 stat; + int i; + + spin_lock(&timer_reg_lock); + stat = bcm_timer_readl(TIMER_IRQSTAT_REG); + bcm_timer_writel(stat, TIMER_IRQSTAT_REG); + spin_unlock(&timer_reg_lock); + + for (i = 0; i < BCM63XX_TIMER_COUNT; i++) { + if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i))) + continue; + + spin_lock(&timer_data_lock); + if (!timer_data[i].cb) { + spin_unlock(&timer_data_lock); + continue; + } + + timer_data[i].cb(timer_data[i].data); + spin_unlock(&timer_data_lock); + } + + return IRQ_HANDLED; +} + +int bcm63xx_timer_enable(int id) +{ + u32 reg; + unsigned long flags; + + if (id >= BCM63XX_TIMER_COUNT) + return -EINVAL; + + spin_lock_irqsave(&timer_reg_lock, flags); + + reg = bcm_timer_readl(TIMER_CTLx_REG(id)); + reg |= TIMER_CTL_ENABLE_MASK; + bcm_timer_writel(reg, TIMER_CTLx_REG(id)); + + reg = bcm_timer_readl(TIMER_IRQSTAT_REG); + reg |= TIMER_IRQSTAT_TIMER_IR_EN(id); + bcm_timer_writel(reg, TIMER_IRQSTAT_REG); + + spin_unlock_irqrestore(&timer_reg_lock, flags); + return 0; +} + +EXPORT_SYMBOL(bcm63xx_timer_enable); + +int bcm63xx_timer_disable(int id) +{ + u32 reg; + unsigned long flags; + + if (id >= BCM63XX_TIMER_COUNT) + return -EINVAL; + + spin_lock_irqsave(&timer_reg_lock, flags); + + reg = bcm_timer_readl(TIMER_CTLx_REG(id)); + reg &= ~TIMER_CTL_ENABLE_MASK; + bcm_timer_writel(reg, TIMER_CTLx_REG(id)); + + reg = bcm_timer_readl(TIMER_IRQSTAT_REG); + reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id); + bcm_timer_writel(reg, TIMER_IRQSTAT_REG); + + spin_unlock_irqrestore(&timer_reg_lock, flags); + return 0; +} + +EXPORT_SYMBOL(bcm63xx_timer_disable); + +int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data) +{ + unsigned long flags; + int ret; + + if (id >= BCM63XX_TIMER_COUNT || !callback) + return -EINVAL; + + ret = 0; + spin_lock_irqsave(&timer_data_lock, flags); + if (timer_data[id].cb) { + ret = -EBUSY; + goto out; + } + + timer_data[id].cb = callback; + timer_data[id].data = data; + +out: + spin_unlock_irqrestore(&timer_data_lock, flags); + return ret; +} + +EXPORT_SYMBOL(bcm63xx_timer_register); + +void bcm63xx_timer_unregister(int id) +{ + unsigned long flags; + + if (id >= BCM63XX_TIMER_COUNT) + return; + + spin_lock_irqsave(&timer_data_lock, flags); + timer_data[id].cb = NULL; + spin_unlock_irqrestore(&timer_data_lock, flags); +} + +EXPORT_SYMBOL(bcm63xx_timer_unregister); + +unsigned int bcm63xx_timer_countdown(unsigned int countdown_us) +{ + return (clk_get_rate(periph_clk) / (1000 * 1000)) * countdown_us; +} + +EXPORT_SYMBOL(bcm63xx_timer_countdown); + +int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us) +{ + u32 reg, countdown; + unsigned long flags; + + if (id >= BCM63XX_TIMER_COUNT) + return -EINVAL; + + countdown = bcm63xx_timer_countdown(countdown_us); + if (countdown & ~TIMER_CTL_COUNTDOWN_MASK) + return -EINVAL; + + spin_lock_irqsave(&timer_reg_lock, flags); + reg = bcm_timer_readl(TIMER_CTLx_REG(id)); + + if (monotonic) + reg &= ~TIMER_CTL_MONOTONIC_MASK; + else + reg |= TIMER_CTL_MONOTONIC_MASK; + + reg &= ~TIMER_CTL_COUNTDOWN_MASK; + reg |= countdown; + bcm_timer_writel(reg, TIMER_CTLx_REG(id)); + + spin_unlock_irqrestore(&timer_reg_lock, flags); + return 0; +} + +EXPORT_SYMBOL(bcm63xx_timer_set); + +int bcm63xx_timer_init(void) +{ + int ret, irq; + u32 reg; + + reg = bcm_timer_readl(TIMER_IRQSTAT_REG); + reg &= ~TIMER_IRQSTAT_TIMER0_IR_EN; + reg &= ~TIMER_IRQSTAT_TIMER1_IR_EN; + reg &= ~TIMER_IRQSTAT_TIMER2_IR_EN; + bcm_timer_writel(reg, TIMER_IRQSTAT_REG); + + periph_clk = clk_get(NULL, "periph"); + if (IS_ERR(periph_clk)) + return -ENODEV; + + irq = bcm63xx_get_irq_number(IRQ_TIMER); + ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL); + if (ret) { + printk(KERN_ERR "bcm63xx_timer: failed to register irq\n"); + return ret; + } + + return 0; +} + +arch_initcall(bcm63xx_timer_init); diff --git a/target/linux/brcm63xx/files/arch/mips/configs/bcm63xx_defconfig b/target/linux/brcm63xx/files/arch/mips/configs/bcm63xx_defconfig new file mode 100644 index 000000000..65cacae63 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/configs/bcm63xx_defconfig @@ -0,0 +1,868 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27 +# Fri Oct 17 06:51:37 2008 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +CONFIG_BCM63XX=y +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set + +# +# CPU support +# +CONFIG_BCM63XX_CPU_6348=y +CONFIG_BCM63XX_CPU_6358=y +CONFIG_BOARD_BCM963XX=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_SHMEM is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +CONFIG_MMU=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +# CONFIG_YENTA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCMCIA_BCM63XX=y +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +CONFIG_BCM63XX_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_BCM63XX_ENET=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_BCM63XX=y +CONFIG_SERIAL_BCM63XX_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE="console=ttyS0,115200" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/target/linux/brcm63xx/files/arch/mips/pci/fixup-bcm63xx.c b/target/linux/brcm63xx/files/arch/mips/pci/fixup-bcm63xx.c new file mode 100644 index 000000000..340863009 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/pci/fixup-bcm63xx.c @@ -0,0 +1,21 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include + +int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return bcm63xx_get_irq_number(IRQ_PCI); +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/target/linux/brcm63xx/files/arch/mips/pci/ops-bcm63xx.c b/target/linux/brcm63xx/files/arch/mips/pci/ops-bcm63xx.c new file mode 100644 index 000000000..f8dce9d9a --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/pci/ops-bcm63xx.c @@ -0,0 +1,179 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include +#include + +#include "pci-bcm63xx.h" + +/* + * swizzle 32bits data to return only the needed part + */ +static int postprocess_read(u32 data, int where, unsigned int size) +{ + u32 ret; + + ret = 0; + switch (size) { + case 1: + ret = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + ret = (data >> ((where & 3) << 3)) & 0xffff; + break; + case 4: + ret = data; + break; + } + return ret; +} + +static int preprocess_write(u32 orig_data, u32 val, int where, + unsigned int size) +{ + u32 ret; + + ret = 0; + switch (size) { + case 1: + ret = (orig_data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 2: + ret = (orig_data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 4: + ret = val; + break; + } + return ret; +} + +/* + * setup hardware for a configuration cycle with given parameters + */ +static int bcm63xx_setup_cfg_access(int type, unsigned int busn, + unsigned int devfn, int where) +{ + unsigned int slot, func, reg; + u32 val; + + slot = PCI_SLOT(devfn); + func = PCI_FUNC(devfn); + reg = where >> 2; + + /* sanity check */ + if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT)) + return 1; + + if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT)) + return 1; + + if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT)) + return 1; + + /* ok, setup config access */ + val = (reg << MPI_L2PCFG_REG_SHIFT); + val |= (func << MPI_L2PCFG_FUNC_SHIFT); + val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT); + val |= MPI_L2PCFG_CFG_USEREG_MASK; + val |= MPI_L2PCFG_CFG_SEL_MASK; + /* type 0 cycle for local bus, type 1 cycle for anything else */ + if (type != 0) { + /* FIXME: how to specify bus ??? */ + val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT); + } + bcm_mpi_writel(val, MPI_L2PCFG_REG); + + return 0; +} + +static int bcm63xx_do_cfg_read(int type, unsigned int busn, + unsigned int devfn, int where, int size, + u32 *val) +{ + u32 data; + + /* two phase cycle, first we write address, then read data at + * another location, caller already has a spinlock so no need + * to add one here */ + if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) + return PCIBIOS_DEVICE_NOT_FOUND; + iob(); + data = le32_to_cpu(__raw_readl(pci_iospace_start)); + /* restore IO space normal behaviour */ + bcm_mpi_writel(0, MPI_L2PCFG_REG); + + *val = postprocess_read(data, where, size); + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm63xx_do_cfg_write(int type, unsigned int busn, + unsigned int devfn, int where, int size, + u32 val) +{ + u32 data; + + /* two phase cycle, first we write address, then write data to + * another location, caller already has a spinlock so no need + * to add one here */ + if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) + return PCIBIOS_DEVICE_NOT_FOUND; + iob(); + + data = le32_to_cpu(__raw_readl(pci_iospace_start)); + data = preprocess_write(data, val, where, size); + + __raw_writel(cpu_to_le32(data), pci_iospace_start); + wmb(); + /* no way to know the access is done, we have to wait */ + udelay(500); + /* restore IO space normal behaviour */ + bcm_mpi_writel(0, MPI_L2PCFG_REG); + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + int type; + + type = bus->parent ? 1 : 0; + + if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) + return PCIBIOS_DEVICE_NOT_FOUND; + + return bcm63xx_do_cfg_read(type, bus->number, devfn, + where, size, val); +} + +static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + int type; + + type = bus->parent ? 1 : 0; + + if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) + return PCIBIOS_DEVICE_NOT_FOUND; + + return bcm63xx_do_cfg_write(type, bus->number, devfn, + where, size, val); +} + +struct pci_ops bcm63xx_pci_ops = { + .read = bcm63xx_pci_read, + .write = bcm63xx_pci_write +}; diff --git a/target/linux/brcm63xx/files/arch/mips/pci/pci-bcm63xx.c b/target/linux/brcm63xx/files/arch/mips/pci/pci-bcm63xx.c new file mode 100644 index 000000000..52bac8e56 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/pci/pci-bcm63xx.c @@ -0,0 +1,178 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon + */ + +#include +#include +#include +#include +#include + +#include "pci-bcm63xx.h" + +/* allow PCI to be disabled at runtime depending on board nvram + * configuration */ +int bcm63xx_pci_enabled = 0; + +static struct resource bcm_pci_mem_resource = { + .name = "bcm63xx PCI memory space", + .start = BCM_PCI_MEM_BASE_PA, + .end = BCM_PCI_MEM_END_PA, + .flags = IORESOURCE_MEM +}; + +static struct resource bcm_pci_io_resource = { + .name = "bcm63xx PCI IO space", + .start = BCM_PCI_IO_BASE_PA, + .end = BCM_PCI_IO_END_PA, + .flags = IORESOURCE_IO +}; + +struct pci_controller bcm63xx_controller = { + .pci_ops = &bcm63xx_pci_ops, + .io_resource = &bcm_pci_io_resource, + .mem_resource = &bcm_pci_mem_resource, +}; + +static u32 bcm63xx_int_cfg_readl(u32 reg) +{ + u32 tmp; + + tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; + tmp |= MPI_PCICFGCTL_WRITEEN_MASK; + bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); + iob(); + return bcm_mpi_readl(MPI_PCICFGDATA_REG); +} + +static void bcm63xx_int_cfg_writel(u32 val, u32 reg) +{ + u32 tmp; + + tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; + tmp |= MPI_PCICFGCTL_WRITEEN_MASK; + bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); + bcm_mpi_writel(val, MPI_PCICFGDATA_REG); +} + +void __iomem *pci_iospace_start; + +static int __init bcm63xx_pci_init(void) +{ + unsigned int mem_size; + u32 val; + + if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) + return -ENODEV; + + if (!bcm63xx_pci_enabled) + return -ENODEV; + + /* + * configuration access are done through IO space, remap 4 + * first bytes to access it from CPU. + * + * this means that no io access from CPU should happen while + * we do a configuration cycle, but there's no way we can add + * a spinlock for each io access, so this is currently kind of + * broken on SMP. + */ + pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4); + if (!pci_iospace_start) + return -ENOMEM; + + /* setup local bus to PCI access (PCI memory) */ + val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK; + bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG); + bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG); + bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG); + + /* set Cardbus IDSEL (type 0 cfg access on primary bus for + * this IDSEL will be done on Cardbus instead) */ + val = bcm_pcmcia_readl(PCMCIA_C1_REG); + val &= ~PCMCIA_C1_CBIDSEL_MASK; + val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT); + bcm_pcmcia_writel(val, PCMCIA_C1_REG); + + /* disable second access windows */ + bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG); + + /* setup local bus to PCI access (IO memory), we have only 1 + * IO window for both PCI and cardbus, but it cannot handle + * both at the same time, assume standard PCI for now, if + * cardbus card has IO zone, PCI fixup will change window to + * cardbus */ + val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK; + bcm_mpi_writel(val, MPI_L2PIOBASE_REG); + bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG); + bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG); + + /* enable PCI related GPIO pins */ + bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG); + + /* setup PCI to local bus access, used by PCI device to target + * local RAM while bus mastering */ + bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3); + if (BCMCPU_IS_6358()) + val = MPI_SP0_REMAP_ENABLE_MASK; + else + val = 0; + bcm_mpi_writel(val, MPI_SP0_REMAP_REG); + + bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4); + bcm_mpi_writel(0, MPI_SP1_REMAP_REG); + + mem_size = bcm63xx_get_memory_size(); + + /* 6348 before rev b0 exposes only 16 MB of RAM memory through + * PCI, throw a warning if we have more memory */ + if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) { + if (mem_size > (16 * 1024 * 1024)) + printk(KERN_WARNING "bcm63xx: this CPU " + "revision cannot handle more than 16MB " + "of RAM for PCI bus mastering\n"); + } else { + /* setup sp0 range to local RAM size */ + bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG); + bcm_mpi_writel(0, MPI_SP1_RANGE_REG); + } + + /* change host bridge retry counter to infinite number of + * retry, needed for some broadcom wifi cards with Silicon + * Backplane bus where access to srom seems very slow */ + val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS); + val &= ~REG_TIMER_RETRY_MASK; + bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS); + + /* enable memory decoder and bus mastering */ + val = bcm63xx_int_cfg_readl(PCI_COMMAND); + val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + bcm63xx_int_cfg_writel(val, PCI_COMMAND); + + /* enable read prefetching & disable byte swapping for bus + * mastering transfers */ + val = bcm_mpi_readl(MPI_PCIMODESEL_REG); + val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK; + val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK; + val &= ~MPI_PCIMODESEL_PREFETCH_MASK; + val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT); + bcm_mpi_writel(val, MPI_PCIMODESEL_REG); + + /* enable pci interrupt */ + val = bcm_mpi_readl(MPI_LOCINT_REG); + val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT); + bcm_mpi_writel(val, MPI_LOCINT_REG); + + register_pci_controller(&bcm63xx_controller); + + /* mark memory space used for IO mapping as reserved */ + request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE, + "bcm63xx PCI IO space"); + return 0; +} + +arch_initcall(bcm63xx_pci_init); diff --git a/target/linux/brcm63xx/files/arch/mips/pci/pci-bcm63xx.h b/target/linux/brcm63xx/files/arch/mips/pci/pci-bcm63xx.h new file mode 100644 index 000000000..a6e594ef3 --- /dev/null +++ b/target/linux/brcm63xx/files/arch/mips/pci/pci-bcm63xx.h @@ -0,0 +1,27 @@ +#ifndef PCI_BCM63XX_H_ +#define PCI_BCM63XX_H_ + +#include +#include +#include +#include + +/* + * Cardbus shares the PCI bus, but has no IDSEL, so a special id is + * reserved for it. If you have a standard PCI device at this id, you + * need to change the following definition. + */ +#define CARDBUS_PCI_IDSEL 0x8 + +/* + * defined in ops-bcm63xx.c + */ +extern struct pci_ops bcm63xx_pci_ops; +extern struct pci_ops bcm63xx_cb_ops; + +/* + * defined in pci-bcm63xx.c + */ +extern void __iomem *pci_iospace_start; + +#endif /* ! PCI_BCM63XX_H_ */ -- cgit v1.2.3