From 1d70fe9050364e62fe5a1c5539b0c56635dc6b71 Mon Sep 17 00:00:00 2001
From: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Sun, 18 Nov 2012 21:27:00 +0000
Subject: brcm47xx: add support for kernel 3.6

This is based on the patch by Peter Wagner.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34252 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../brcm47xx/patches-3.6/210-b44_phy_fix.patch     | 54 ++++++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 target/linux/brcm47xx/patches-3.6/210-b44_phy_fix.patch

(limited to 'target/linux/brcm47xx/patches-3.6/210-b44_phy_fix.patch')

diff --git a/target/linux/brcm47xx/patches-3.6/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-3.6/210-b44_phy_fix.patch
new file mode 100644
index 000000000..a7929bb42
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.6/210-b44_phy_fix.patch
@@ -0,0 +1,54 @@
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -410,10 +410,34 @@ static void b44_wap54g10_workaround(stru
+ error:
+ 	pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
+ }
++
++static void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++	char buf[20];
++	struct ssb_device *sdev = bp->sdev;
++
++	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
++	if (sdev->bus->sprom.board_num == 100) {
++		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++	} else {
++		/* WL-HDD */
++		if (nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
++		    !strncmp(buf, "WL300-", strlen("WL300-"))) {
++			if (sdev->bus->sprom.et0phyaddr == 0 &&
++			    sdev->bus->sprom.et1phyaddr == 1)
++				bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++		}
++	}
++	return;
++}
+ #else
+ static inline void b44_wap54g10_workaround(struct b44 *bp)
+ {
+ }
++
++static inline void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++}
+ #endif
+ 
+ static int b44_setup_phy(struct b44 *bp)
+@@ -422,6 +446,7 @@ static int b44_setup_phy(struct b44 *bp)
+ 	int err;
+ 
+ 	b44_wap54g10_workaround(bp);
++	b44_bcm47xx_workarounds(bp);
+ 
+ 	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+ 		return 0;
+@@ -2104,6 +2129,8 @@ static int __devinit b44_get_invariants(
+ 	 * valid PHY address. */
+ 	bp->phy_addr &= 0x1F;
+ 
++	b44_bcm47xx_workarounds(bp);
++
+ 	memcpy(bp->dev->dev_addr, addr, 6);
+ 
+ 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
-- 
cgit v1.2.3