From 7ed9009bbdf799be5f9f1446c264b8504f483beb Mon Sep 17 00:00:00 2001 From: nbd Date: Fri, 4 May 2007 22:13:42 +0000 Subject: convert brcm-2.4 to the new target structure git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7092 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../files/arch/mips/bcm947xx/include/sbextif.h | 243 +++++++++++++++++++++ 1 file changed, 243 insertions(+) create mode 100644 target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbextif.h (limited to 'target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbextif.h') diff --git a/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbextif.h b/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbextif.h new file mode 100644 index 000000000..7c3f2a0d6 --- /dev/null +++ b/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbextif.h @@ -0,0 +1,243 @@ +/* + * Hardware-specific External Interface I/O core definitions + * for the BCM47xx family of SiliconBackplane-based chips. + * + * The External Interface core supports a total of three external chip selects + * supporting external interfaces. One of the external chip selects is + * used for Flash, one is used for PCMCIA, and the other may be + * programmed to support either a synchronous interface or an + * asynchronous interface. The asynchronous interface can be used to + * support external devices such as UARTs and the BCM2019 Bluetooth + * baseband processor. + * The external interface core also contains 2 on-chip 16550 UARTs, clock + * frequency control, a watchdog interrupt timer, and a GPIO interface. + * + * Copyright 2006, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id: sbextif.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $ + */ + +#ifndef _SBEXTIF_H +#define _SBEXTIF_H + +/* external interface address space */ +#define EXTIF_PCMCIA_MEMBASE(x) (x) +#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000) +#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000) +#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000) +#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000) + +/* cpp contortions to concatenate w/arg prescan */ +#ifndef PAD +#define _PADLINE(line) pad ## line +#define _XSTR(line) _PADLINE(line) +#define PAD _XSTR(__LINE__) +#endif /* PAD */ + +/* + * The multiple instances of output and output enable registers + * are present to allow driver software for multiple cores to control + * gpio outputs without needing to share a single register pair. + */ +struct gpiouser { + uint32 out; + uint32 outen; +}; +#define NGPIOUSER 5 + +typedef volatile struct { + uint32 corecontrol; + uint32 extstatus; + uint32 PAD[2]; + + /* pcmcia control registers */ + uint32 pcmcia_config; + uint32 pcmcia_memwait; + uint32 pcmcia_attrwait; + uint32 pcmcia_iowait; + + /* programmable interface control registers */ + uint32 prog_config; + uint32 prog_waitcount; + + /* flash control registers */ + uint32 flash_config; + uint32 flash_waitcount; + uint32 PAD[4]; + + uint32 watchdog; + + /* clock control */ + uint32 clockcontrol_n; + uint32 clockcontrol_sb; + uint32 clockcontrol_pci; + uint32 clockcontrol_mii; + uint32 PAD[3]; + + /* gpio */ + uint32 gpioin; + struct gpiouser gpio[NGPIOUSER]; + uint32 PAD; + uint32 ejtagouten; + uint32 gpiointpolarity; + uint32 gpiointmask; + uint32 PAD[153]; + + uint8 uartdata; + uint8 PAD[3]; + uint8 uartimer; + uint8 PAD[3]; + uint8 uartfcr; + uint8 PAD[3]; + uint8 uartlcr; + uint8 PAD[3]; + uint8 uartmcr; + uint8 PAD[3]; + uint8 uartlsr; + uint8 PAD[3]; + uint8 uartmsr; + uint8 PAD[3]; + uint8 uartscratch; + uint8 PAD[3]; +} extifregs_t; + +/* corecontrol */ +#define CC_UE (1 << 0) /* uart enable */ + +/* extstatus */ +#define ES_EM (1 << 0) /* endian mode (ro) */ +#define ES_EI (1 << 1) /* external interrupt pin (ro) */ +#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */ + +/* gpio bit mask */ +#define GPIO_BIT0 (1 << 0) +#define GPIO_BIT1 (1 << 1) +#define GPIO_BIT2 (1 << 2) +#define GPIO_BIT3 (1 << 3) +#define GPIO_BIT4 (1 << 4) +#define GPIO_BIT5 (1 << 5) +#define GPIO_BIT6 (1 << 6) +#define GPIO_BIT7 (1 << 7) + + +/* pcmcia/prog/flash_config */ +#define CF_EN (1 << 0) /* enable */ +#define CF_EM_MASK 0xe /* mode */ +#define CF_EM_SHIFT 1 +#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */ +#define CF_EM_SYNC 0x2 /* synchronous mode */ +#define CF_EM_PCMCIA 0x4 /* pcmcia mode */ +#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */ +#define CF_BS (1 << 5) /* byteswap */ +#define CF_CD_MASK 0xc0 /* clock divider */ +#define CF_CD_SHIFT 6 +#define CF_CD_DIV2 0x0 /* backplane/2 */ +#define CF_CD_DIV3 0x40 /* backplane/3 */ +#define CF_CD_DIV4 0x80 /* backplane/4 */ +#define CF_CE (1 << 8) /* clock enable */ +#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */ + +/* pcmcia_memwait */ +#define PM_W0_MASK 0x3f /* waitcount0 */ +#define PM_W1_MASK 0x1f00 /* waitcount1 */ +#define PM_W1_SHIFT 8 +#define PM_W2_MASK 0x1f0000 /* waitcount2 */ +#define PM_W2_SHIFT 16 +#define PM_W3_MASK 0x1f000000 /* waitcount3 */ +#define PM_W3_SHIFT 24 + +/* pcmcia_attrwait */ +#define PA_W0_MASK 0x3f /* waitcount0 */ +#define PA_W1_MASK 0x1f00 /* waitcount1 */ +#define PA_W1_SHIFT 8 +#define PA_W2_MASK 0x1f0000 /* waitcount2 */ +#define PA_W2_SHIFT 16 +#define PA_W3_MASK 0x1f000000 /* waitcount3 */ +#define PA_W3_SHIFT 24 + +/* pcmcia_iowait */ +#define PI_W0_MASK 0x3f /* waitcount0 */ +#define PI_W1_MASK 0x1f00 /* waitcount1 */ +#define PI_W1_SHIFT 8 +#define PI_W2_MASK 0x1f0000 /* waitcount2 */ +#define PI_W2_SHIFT 16 +#define PI_W3_MASK 0x1f000000 /* waitcount3 */ +#define PI_W3_SHIFT 24 + +/* prog_waitcount */ +#define PW_W0_MASK 0x0000001f /* waitcount0 */ +#define PW_W1_MASK 0x00001f00 /* waitcount1 */ +#define PW_W1_SHIFT 8 +#define PW_W2_MASK 0x001f0000 /* waitcount2 */ +#define PW_W2_SHIFT 16 +#define PW_W3_MASK 0x1f000000 /* waitcount3 */ +#define PW_W3_SHIFT 24 + +#define PW_W0 0x0000000c +#define PW_W1 0x00000a00 +#define PW_W2 0x00020000 +#define PW_W3 0x01000000 + +/* flash_waitcount */ +#define FW_W0_MASK 0x1f /* waitcount0 */ +#define FW_W1_MASK 0x1f00 /* waitcount1 */ +#define FW_W1_SHIFT 8 +#define FW_W2_MASK 0x1f0000 /* waitcount2 */ +#define FW_W2_SHIFT 16 +#define FW_W3_MASK 0x1f000000 /* waitcount3 */ +#define FW_W3_SHIFT 24 + +/* watchdog */ +#define WATCHDOG_CLOCK 48000000 /* Hz */ + +/* clockcontrol_n */ +#define CN_N1_MASK 0x3f /* n1 control */ +#define CN_N2_MASK 0x3f00 /* n2 control */ +#define CN_N2_SHIFT 8 + +/* clockcontrol_sb/pci/mii */ +#define CC_M1_MASK 0x3f /* m1 control */ +#define CC_M2_MASK 0x3f00 /* m2 control */ +#define CC_M2_SHIFT 8 +#define CC_M3_MASK 0x3f0000 /* m3 control */ +#define CC_M3_SHIFT 16 +#define CC_MC_MASK 0x1f000000 /* mux control */ +#define CC_MC_SHIFT 24 + +/* Clock control default values */ +#define CC_DEF_N 0x0009 /* Default values for bcm4710 */ +#define CC_DEF_100 0x04020011 +#define CC_DEF_33 0x11030011 +#define CC_DEF_25 0x11050011 + +/* Clock control values for 125Mhz */ +#define CC_125_N 0x0802 +#define CC_125_M 0x04020009 +#define CC_125_M25 0x11090009 +#define CC_125_M33 0x11090005 + +/* Clock control magic field values */ +#define CC_F6_2 0x02 /* A factor of 2 in */ +#define CC_F6_3 0x03 /* 6-bit fields like */ +#define CC_F6_4 0x05 /* N1, M1 or M3 */ +#define CC_F6_5 0x09 +#define CC_F6_6 0x11 +#define CC_F6_7 0x21 + +#define CC_F5_BIAS 5 /* 5-bit fields get this added */ + +#define CC_MC_BYPASS 0x08 +#define CC_MC_M1 0x04 +#define CC_MC_M1M2 0x02 +#define CC_MC_M1M2M3 0x01 +#define CC_MC_M1M3 0x11 + +#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */ + +#endif /* _SBEXTIF_H */ -- cgit v1.2.3